Some logitech devices seem to reboot immediately and the failures then
look like a broken pipe, but are actually the device rebooting.
If the device really did fail to detach after the timeout is done we'll
see a message that the device failed to come back instead.
Deleting boot entries from EFI sometimes triggers problems on some firmware.
We don't actually need to do it from the EFI binary, and it's perfectly safe to
leave it in the boot list. It also means when doing multiple updates over
several months we're not creating, deleting, creating, deleting and can just
re-use the same BootXXXX number each time.
It also makes the EFI binary simpler, which is good.
At the moment fwupd creates a BootXXXX for fwupd.efi and marks it BootNext.
It *also* adds it to the end of BootOrder to work around various old firmware
bugs like https://github.com/rhboot/fwupdate/issues/55 which we can perhaps
drop sometime thie century.
Remove the rewriting of BootOrder from the EFI binary; we've accidentally not
been doing it for a long time and nothing broke, and I'd like to make the EFI
binary as small and simple as possible. The user can remove the entry from the
BIOS or using efibootmgr if required, but it's harmless to just leave it.
This reverts commit 44f55e2ee6.
This behavior caused fwupdx64.efi to loop for a very long time until
either aborting, running out of memory or some other problems.
Fixes: #1756Fixes: #1751
The guint16 was promoted to (signed) int for the multiplication, which meant
that the highest address possible was 0x7FFFFFFF not 0xFFFFFFFF. Which doesn't
really matter in reality, as all addresses are much smaller than that now.
gnu-efi 3.0.11 moves a few files around, e.g.
/usr/lib64/gnuefi/elf_x64_efi.lds -> /usr/lib64/gnuefi/x64/efi.lds
...and this causes the UEFI EFI helper to fail to link.
Add support for the 'new' paths and fall back to the old ones.
Fixes https://github.com/fwupd/fwupd/issues/1736
In some composite dock hardware there are two USB devices exported to the host,
both with the same VID:PID values. We need to use the device type (e.g. VL812B3)
to differenciate the devices and install the correct fw on the correct device.
In theory, these should always match the reported PCRx values from the TPM.
If the reconstructed event log checksum does not match the TPM value then
something is either implemented wrongly, or something bad has happened.
This means we use half the amount of memory to store the event hashes, and also
means we can process the raw data in future patches without parsing back out
of ASCII format.
UEFI runtime service GetVariable with DataSize NULL, will fail and get
EFI_INVALID_PARAMETER returned. Set DataSize 0 and allocate the buffer for
getting attributes for the deleted variable.
Also, fix the real reason Boot#### was never found.
Synaptics versions are encoded as BCD, the largest version that will
ever be represented in this field is '99'.
Using 3 digits in this field has caused multiple problems in upgrades from
LVFS.
1. Devices are being upgraded when not necessary.
IE `5.3.10 > 5.3.010`
2. Device upgrades are deemed failures as follows:
```
BootTime=1571436076,
CompileVersion(com.redhat.efivar)=37,
CompileVersion(com.redhat.fwupdate)=12,
CompileVersion(org.freedesktop.fwupd)=1.3.2,
CompileVersion(org.freedesktop.gusb)=0.3.0,
CpuArchitecture=x86_64,
DistroId=fedora,
DistroVariant=workstation,
DistroVersion=32,
FirmwareId=1915,
Flags=4194346,
Guid=f15aa55c-9cd5-5942-85ae-a6bf8740b96c,
MachineId=97aa89528b88d9631867a4e20c68a5208124ef592e19d05f0c5e7d22bd4d7afb,
Plugin=synapticsmst,
RuntimeVersion(com.dell.libsmbios)=2.4,
RuntimeVersion(com.redhat.fwupdate)=12,
RuntimeVersion(org.freedesktop.appstream-glib)=0.7.14,
RuntimeVersion(org.freedesktop.fwupd)=1.3.2,
RuntimeVersion(org.kernel)=5.4.0-0.rc2.git2.1.fc32.x86_64,
UpdateError=device version not updated on success, 05.03.10 != 5.03.010,
UpdateState=failed,
VersionNew=05.03.10,
VersionOld=5.03.010
```
There's no reason to prevent NULL, and doing so means the caller has to check
before setting the value. Only one subclassed type was actually doing this...
No need to fail these self tests when using amdgpu, just skip them.
Fixes unrelated issue found in #1183
Signed-off-by: Richard Hughes <richard@hughsie.com>
