Instead of an English-only icudt64l.dat in the repo,
we now have icudt64l.dat.gz with all locales.
- updated READMEs and docs
- shrinker now copies source, and compresses (bzip2) the ICU data file
- configure expects deps/icu-small to be full ICU with a full
compressed data file
Fixes: https://github.com/nodejs/node/issues/19214
Co-Authored-By: Richard Lau <riclau@uk.ibm.com>
Co-Authored-By: Jan Olaf Krems <jan.krems@gmail.com>
Co-Authored-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/29522
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
All these APIs have napi_finalize parameter but they don't behave
exactly the same.
Fixes: https://github.com/nodejs/node/issues/29750
PR-URL: https://github.com/nodejs/node/pull/29797
Reviewed-By: Gabriel Schulhof <gabriel.schulhof@intel.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
In most cases, stability note is the first info in a doc section
after YAML. This PR makes it consistent across all docs,
as this info seems the most relevant for a reader.
PR-URL: https://github.com/nodejs/node/pull/29799
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This improves Node.js errors by always showing the attached properties
when inspecting such an error. This applies especially to SystemError.
It did often not show any properties but now all properties will be
visible.
This is done in a mainly backwards compatible way. Instead of using
prototype getters and setters, the property is now set directly on the
error.
PR-URL: https://github.com/nodejs/node/pull/29677
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Remove reference to job that is out of date, has not
been run for a long time and likely does not work
properly.
Refs: https://github.com/nodejs/citgm/issues/741
PR-URL: https://github.com/nodejs/node/pull/29774
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
This change also supports --pending-deprecation for the new deprecation.
PR-URL: https://github.com/nodejs/node/pull/29781
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reference links were used in the document, but not define at the end.
PR-URL: https://github.com/nodejs/node/pull/29558
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
* Make a section with a history remark a YAML section
of the relevant method.
Refs: https://github.com/nodejs/node/pull/29761#discussion_r329354848
* Make a bold line a real heading to be included in the TOC.
* Add formal return types.
* Reduce redundancy in a description.
* Unify link format.
* Fix ASCII sorting in bottom references.
PR-URL: https://github.com/nodejs/node/pull/29761
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
The library is not necessary for ppc64 or s390x. It does no harm with
some linkers, but devtoolset-6 creates runtime dependencies on all link
libraries, even unused ones.
Fixes: https://github.com/nodejs/node/issues/27377
Fixes: https://github.com/nodejs/node/issues/29718
PR-URL: https://github.com/nodejs/node/pull/29727
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This makes sure that `AssertionError` links to the correct place in
the assert documentation.
PR-URL: https://github.com/nodejs/node/pull/28263
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This updates two outdated examples to the current implementation.
PR-URL: https://github.com/nodejs/node/pull/28263
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This makes sure that using `assert.throws()` or `assert.rejects()`
in combination with Error classes log appropriate error messages
in case the expected and received constructor name are identical
but not part of the same prototype chain.
PR-URL: https://github.com/nodejs/node/pull/28263
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This adds information about the actual thrown error to the
AssertionError's message property.
It also improves the logged error instances error name by using the
constructors name, if available.
PR-URL: https://github.com/nodejs/node/pull/28263
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This refactors some code for less duplication.
PR-URL: https://github.com/nodejs/node/pull/28263
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This makes sure that validation function used by `assert.throws` and
`assert.rejects` always throw validatin errors instead of rethrowing
the received error.
That should improve the debugging experience for developers since
they have a better context where the error is coming from and they
also get to know what triggered it.
PR-URL: https://github.com/nodejs/node/pull/28263
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This makes sure the `generatedMessage` property is always set as
expected. This was not the case some `assert.throws` and
`assert.rejects` calls.
PR-URL: https://github.com/nodejs/node/pull/28263
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This improves `assert.throws()` and `assert.rejects()` in case error
classes are used as validation for the expected error.
In case of a failure it will now throw an `AssertionError` instead
of the received error if the check fails. That error has the received
error as actual property and the expected property is set to the
expected error class.
The error message should help users to identify the problem faster
than before by providing extra context what went wrong.
PR-URL: https://github.com/nodejs/node/pull/28263
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This is just a refactoring to reduce code and computational overhead.
PR-URL: https://github.com/nodejs/node/pull/29683
Reviewed-By: James M Snell <jasnell@gmail.com>
This improves the readability of the `console.timeEnd()` output
while keeping a higher output's precision in multiple cases.
Instead of e.g. '1.005min' it will print '1:00.300 (m:ss.mmm)'.
PR-URL: https://github.com/nodejs/node/pull/29629
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
After an OpenSSL source update, all the config files need to be
regenerated and comitted by:
$ cd deps/openssl/config
$ make
$ git add deps/openssl/config/archs
$ git add deps/openssl/openssl/crypto/include/internal/bn_conf.h
$ git add deps/openssl/openssl/crypto/include/internal/dso_conf.h
$ git add deps/openssl/openssl/include/openssl/opensslconf.h
$ git commit
PR-URL: https://github.com/nodejs/node/pull/29550
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
The TSC has responsibility for Node.js security, so avoid fragmentation
of the Node.js maintenance process documentation by adding it to the
other guides.
PR-URL: https://github.com/nodejs/node/pull/29685
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Renames the `--loader` cli argument to `--experimental-loader`. This is
to clearly indicate the esm loader feature as experimental even after
esm is no longer experimental.
Also minorly alters the `--experimental-loader` docs to say that the
passed loader can be an esm module.
Refs: https://github.com/nodejs/modules/issues/351#issuecomment-535189524
PR-URL: https://github.com/nodejs/node/pull/29752
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
test-cluster-net-listen-ipv6only-none was using port `0` for an
IPv6-only operation and assuming that the operating system would supply
a port that was also available in IPv4. However, CI results seem to
indicate that a port can be supplied that is in use by IPv4 but
available to IPv6, resulting in the test failing. Use `common.PORT` to
avoid this issue.
Fixes: https://github.com/nodejs/node/issues/29679
PR-URL: https://github.com/nodejs/node/pull/29681
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Ensure the callback is always invoked before emitting
the error in both sync and async case.
PR-URL: https://github.com/nodejs/node/pull/29293
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
The data are needed for new Intl.NumberFormat options added by V8.
Fixes: https://github.com/nodejs/node/issues/29734
PR-URL: https://github.com/nodejs/node/pull/29735
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Steven R Loomis <srloomis@us.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
PR-URL: https://github.com/nodejs/node/pull/29705
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Shelley Vohr <codebytere@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
The following pattern is redundant, so remove it:
if (options.foo !== undefined)
this.foo = options.foo;
else
this.foo = undefined;
PR-URL: https://github.com/nodejs/node/pull/29704
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Rich Trott <rtrott@gmail.com>
