The zvol blk-mq codepaths would erroneously send FLUSH and TRIM
commands down the read codepath, rather than write. This fixes
the issue, and updates the zvol_misc_fua test to verify that
sync writes are actually happening.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17761Closes#17765
Traditionally, unused dentries would be cached in the dentry cache until
the associated entry is no longer on disk. The cached dentry continues
to hold an inode reference, causing the inode to be pinned (see previous
commit).
Here we implement the dentry op d_delete, which is roughly analogous to
the drop_inode superblock op, and add a zfs_delete_dentry tunable to
control its behaviour. By default it continues the traditional
behaviour, but when the tunable is enabled, we signal that an unused
dentry should be freed immediately, releasing its inode reference, and
so allowing that inode to be deleted if no longer in use.
Sponsored-by: Klara, Inc.
Sponsored-by: Fastmail Pty Ltd
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17746
Traditionally, unused inodes would be held on the superblock inode cache
until the associated on-disk file is removed or the kernel requests
reclaim. On filesystems with millions of rarely-used files, this can be
a lot of unusable memory.
Here we implement the superblock drop_inode method, and add a
zfs_delete_inode tunable to control its behaviour. By default it
continues the traditional behaviour, but when the tunable is enabled, we
signal that the inode should be deleted immediately when the last
reference is dropped, rather than cached. This releases the associated
data to the dbuf cache and ARC, allowing them to be reclaimed normally.
Sponsored-by: Klara, Inc.
Sponsored-by: Fastmail Pty Ltd
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17746
Many IO operations are submitted to the kernel async, and so the zio can
complete and followup actions before the submission call returns. If one
of the followup actions closes the disk (eg during pool create/import),
the initiator may be left holding a lock on the disk at destruction.
Instead, take the write lock before finishing up and decoupling the disk
state from the vdev proper. The caller will hold until all IO is
submitted and locks released.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17719
zfs_aclset_common() might be called for newly created or not even
created vnodes, that triggers assertions on newer FreeBSD versions
with DEBUG_VFS_LOCKS included into INVARIANTS. In the first case
make sure to call vn_seqc_write_begin()/_end(), in the second just
skip the assertion.
The similar has to be done for project management IOCTL and file-
bases extended attributes, since those are not going through VFS.
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17722
We only have extremely narrow uses, so move it all into a single
function that does only what we need, with and without d_set_d_op().
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17621
FreeBSD now has a pathconf name called _PC_CLONE_BLKSIZE
which is the block size supported for block cloning for
the file system. Since ZFS's block size varies per file,
return the largest size likely to be used, or zero if block
cloning is not supported.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17645
zfsctl_root_readdir(): properly set eof.
readdir(): set *eofp to 1 on eof.
If there were no dirents to copy out, return EINVAL same as UFS.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Konstantin Belousov <kib@FreeBSD.org>
Closes#17655
zvol_state_lock is intended to protect access to the global name->zvol
lists (zvol_find_by_name()), but has also been used to control access to
OS-side private data, accessed through whatever kernel object is used to
represent the volume (gendisk, geom, etc).
This appears to have been necessary to some degree because the OS-side
object is what's used to get a handle on zvol_state_t, so zv_state_lock
and zv_suspend_lock can't be used to manage access, but also, with the
private object and the zvol_state_t being shutdown and destroyed at the
same time in zvol_os_free(), we must ensure that the private object
pointer only ever corresponds to a real zvol_state_t, not one in partial
destruction. Taking the global lock seems like a convenient way to
ensure this.
The problem with this is that zvol_state_lock does not actually protect
access to the zvol_state_t internals, so we need to take zv_state_lock
and/or zv_suspend_lock. If those are contended, this can then cause
OS-side operations (eg zvol_open()) to sleep to wait for them while hold
zvol_state_lock. This then blocks out all other OS-side operations which
want to get the private data, and any ZFS-side control operations that
would take the write half of the lock. It's even worse if ZFS-side
operations induce OS-side calls back into the zvol (eg creating a zvol
triggers a partition probe inside the kernel, and also a userspace
access from udev to set up device links). And it gets even works again
if anything decides to defer those ops to a task and wait on them, which
zvol_remove_minors_impl() will do under high load.
However, since the previous commit, we have a guarantee that the private
data pointer will always be NULL'd out in zvol_os_remove_minor()
_before_ the zvol_state_t is made invalid, but it won't happen until all
users are ejected. So, if we make access to the private object pointer
atomic, we remove the need to take a global lockout to access it, and so
we can remove all acquisitions of zvol_state_lock from the OS side.
While here, I've rewritten much of the locking theory comment at the top
of zvol.c. It wasn't wrong, but it hadn't been followed exactly, so I've
tried to describe the purpose of each lock in a little more detail, and
in particular describe where it should and shouldn't be used.
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17625
When destroying a zvol, it is not "unpublished" from the system (that
is, /dev/zd* node removed) until zvol_os_free(). Under Linux, at the
time del_gendisk() and put_disk() are called, the device node may still
be have an active hold, from a userspace program or something inside the
kernel (a partition probe). As it is currently, this can lead to calls
to zvol_open() or zvol_release() while the zvol_state_t is partially or
fully freed. zvol_open() has some protection against this by checking
that private_data is NULL, but zvol_release does not.
This implements a better ordering for all of this by adding a new
OS-side method, zvol_os_remove_minor(), which is responsible for fully
decoupling the "private" (OS-side) objects from the zvol_state_t. For
Linux, that means calling put_disk(), nulling private_data, and freeing
zv_zso.
This takes the place of zvol_os_clear_private(), which was a nod in that
direction but did not do enough, and did not do it early enough.
Equivalent changes are made on the FreeBSD side to follow the API
change.
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Fedor Uporov <fuporov.vstack@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17625
Back in 2014 the zfs_autoimport_disable module option was added to
control whether the kmods should load the pool configs from the cache
file on module load. The default value since that time has been for
the kernel to not process the cache file.
Detecting and importing pools during boot is now controlled outside
of the kmod on both Linux and FreeBSD. By all accounts this has been
working well and we can remove this dormant code on the kernel side.
The spa_config_load() function is has been moved to userspace, it is
now only used by libzpool. Additionally, the spa_boot_init() hook
which was used by FreeBSD now looks to be used and was removed.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17618
This is trying to get all the uses and non-uses of SET_ERROR correct
(being: only call it if we're the originator of an error _within ZFS_),
and correctly negating errors going to/from the kernel. And/or both.
Sponsored-by: Klara, Inc.
Sponsored-by: Railway Corporation
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17605
Since zil_commit_flags(NOW) will always return error if the pool is
suspended, there's no need for a separate suspend check here.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
Page writeback is considered completed when the associated itx callback
completes. A syncing writeback will receive the error in its callback
directly, but an in-flight async writeback that was promoted to sync by
the ZIL may also receive an error.
Writeback errors, even syncing writeback errors, are not especially
serious on their own, because the error will ultimately be returned to
the zil_commit() caller, either zfs_fsync() for an explicit sync op (eg
msync()) or to zfs_putpage() itself for a syncing (VM_PAGER_PUT_SYNC)
writeback.
The only thing we need to do when a page writeback fails is to skip
marking the page clean ("undirty"), since we don't know if it made it to
disk yet. This will ensure that it gets written out again in the future,
either some scheduled async writeback or another explicit syncing call.
On the other side, we need to make sure that if a syncing op arrives,
any changes on dirty pages are written back to the DMU and/or the ZIL
first. We do this by starting an async writeback on the vnode cache
first, so any dirty data has been recorded in the ZIL, ready for the
followup zfs_sync()->zil_commit() to find.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
Page writeback is considered completed when the associated itx callback
completes. A syncing writeback will receive the error in its callback
directly, but an in-flight async writeback that was promoted to sync by
the ZIL may also receive an error.
Writeback errors, even syncing writeback errors, are not especially
serious on their own, because the error will ultimately be returned to
the zil_commit() caller, either zfs_fsync() for an explicit sync op (eg
msync()) or to zfs_putpage() itself for a syncing (WB_SYNC_ALL) writeback
(kernel housekeeping or sync_file_range(SYNC_FILE_RANGE_WAIT_AFTER).
The only thing we need to do when a page writeback fails is to re-mark
the page dirty, since we don't know if it made it to disk yet. This will
ensure that it gets written out again in the future, either some
scheduled async writeback or another explicit syncing call.
On the other side, we need to make sure that if a syncing op arrives,
any changes on dirty pages are written back to the DMU and/or the ZIL
first. We do this by starting an _async_ (WB_SYNC_NONE) writeback on the
file mapping at the start of the sync op (fsync(), msync(), etc). An
async op will get an async itx created and logged, ready for the
followup zfs_fsync()->zil_commit() to find, while avoiding a zil_commit()
call for every page in the range.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
ITX callbacks are used to signal that something can be cleaned up after
a itx is committed. Presently that's only used when syncing out mapped
pages (msync()) to mark dirty pages clean.
This extends the callback interface so it can be passed an error, and
take a different cleanup action if necessary.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
This changes zil_commit() to have an int return, and updates all callers
to check it. There are no corresponding internal changes yet; it will
always return 0.
Since zil_commit() is an indication that the caller _really_ wants the
associated data to be durability stored, I've annotated it with the
__warn_unused_result__ compiler attribute (via __must_check), to emit a
warning if it's ever ussd without doing something with the return code.
I hope this will mean we never misuse it in the future.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
03987f71e3 (#16069) added a workaround to get the blk-mq hardware
context for older kernels that don't cache it in the struct request.
However, this workaround appears to be incomplete.
In 4.19, the rq data context is optional. If its not initialised, then
the cached rq->cpu will be -1, and so using it to index into mq_map
causes a crash.
Given that the upstream 4.19 is now in extended LTS and rarely seen,
RHEL8 4.18+ has long carried "modern" blk-mq support, and the cached
hardware context has been available since 5.1, I'm not going to huge
lengths to get queue selection correct for the very few people that are
likely to feel it. To that end, we simply call raw_smp_processor_id() to
get a valid CPU id and use that instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#17597
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
The structure of zfs_putpage() and its callers is tricky to follow.
There's a lot more we could do to improve it, but at least now we have
some description of one of the trickier bits.
Writing this exposed a very subtle bug: most async pages pushed out
through zpl_putpages() would go to the ZIL with commit=false, which can
yield a less-efficient write policy. So this commit updates that too.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17584
For async page writeback, we do not need to wait for the page to be on
disk before returning to the caller; it's enough that the data from the
dirty page be on the DMU and in the in-memory ZIL, just like any other
write.
So, if this is not a syncing write, don't add a callback to the itx, and
instead just unlock the page immediately.
(This is effectively the same concept used for FreeBSD in d323fbf49c).
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17584Closes#14290
All this machinery is there to try to understand when there an async
writeback waiting to complete because the intent log callbacks are still
outstanding, and force them with a timely zil_commit(). The next commit
fixes this properly, so there's no need for all this extra housekeeping.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17584
Now zvol minors creation logic is passed thru spa_zvol_taskq, like it
is doing for remove/rename zvol minors functions. Appropriate
zvol minors creation functions are refactored:
- The zvol_create_minor()/zvol_minors_create_recursive() were removed.
- The single zvol_create_minors() is added instead.
Also, it become possible to collect zvol minors subtasks status, to
detect, if some zvol minor subtask is failed in the subtasks chain.
The appropriate message is reported to zfs_dbgmsg buffer in this case.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17575
Avoid calling dbuf_evict_one() from memory reclaim contexts (e.g. Linux
kswapd, FreeBSD pagedaemon). This prevents deadlock caused by reclaim
threads waiting for the dbuf hash lock in the call sequence:
dbuf_evict_one -> dbuf_destroy -> arc_buf_destroy
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Kaitlin Hoang <kthoang@amazon.com>
Closes#17561
Implement zvol_alloc() function on FreeBSD side to increase code base
compatibility with Linux. Also, fix issue with late returning in case
if volmode=none.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17482
FreeBSD commit 2ec2ba7e232d added the Solaris style syscall interface
for extended attributes. This patch wires this interface into the
FreeBSD ZFS port, since this style of extended attributes is supported
by OpenZFS internally when the "xattr" property is set to "dir".
Some specific changes:
LOOKUP_NAMED_ATTR is defined to indicate the need to set V_NAMEDATTR
for calls to zfs_zaccess().
V_NAMEDATTR indicates that the access checking does need to be done
for FreeBSD.
The access checking code for extended attributes was copy/pasted from
the Linux port into zfs_zaccess() in the FreeBSD port.
Most of the changes are in zfs_freebsd_lookup() and
zfs_freebsd_create().
The semantics of these functions should remain unchanged unless named
attributes are being manipulated.
All the code changes are enabled for __FreeBSD_version 1500040 and
newer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17540
Return from zvol_os_create_minor() function immediately after
dsl_prop_get_integer() call if volmode property value is set to
'none', like it is doing on Linux side.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17405
Seems like we haven't set it since the SPL was pulled into the main ZFS
tree. In removing the define, I've taken the 64-bit version (ie the one
that _hasn't_ been running since back then) because it looks like its
closer to the intended width by the way its used.
Since the macros ar eno longer needed as a selector, pull those too.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
Linux kernel shrinker in the context of null/root memcg does not scan
dentry and inode caches added by a task running in non-root memcg. For
ZFS this means that dnode cache routinely overflows, evicting valuable
meta/data and putting additional memory pressure on the system.
This patch restores zfs_prune_aliases as fallback when the kernel
shrinker does nothing, enabling zfs to actually free dnodes. Moreover,
it (indirectly) calls arc_evict when dnode_size > dnode_limit.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#17487Closes#17542
On Linux, when doing path lookup with LOOKUP_RCU, dentry and inode can
be dereferenced without refcounts and locks. For this reason, dentry and
inode must only be freed after RCU grace period.
However, zfs currently frees inode in zfs_inode_destroy synchronously
and we can't use GPL-only call_rcu() in zfs directly. Fortunately, on
Linux 5.2 and after, if we define sops->free_inode(), the kernel will do
call_rcu() for us.
This issue may be triggered more easily with init_on_free=1 boot
parameter:
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:selinux_inode_permission+0x10e/0x1c0
Call Trace:
? show_trace_log_lvl+0x1be/0x2d9
? show_trace_log_lvl+0x1be/0x2d9
? show_trace_log_lvl+0x1be/0x2d9
? security_inode_permission+0x37/0x60
? __die_body.cold+0x8/0xd
? no_context+0x113/0x220
? exc_page_fault+0x6d/0x130
? asm_exc_page_fault+0x1e/0x30
? selinux_inode_permission+0x10e/0x1c0
security_inode_permission+0x37/0x60
link_path_walk.part.0.constprop.0+0xb5/0x360
? path_init+0x27d/0x3c0
path_lookupat+0x3e/0x1a0
filename_lookup+0xc0/0x1d0
? __check_object_size.part.0+0x123/0x150
? strncpy_from_user+0x4e/0x130
? getname_flags.part.0+0x4b/0x1c0
vfs_statx+0x72/0x120
? ioctl_has_perm.constprop.0.isra.0+0xbd/0x120
__do_sys_newlstat+0x39/0x70
? __x64_sys_ioctl+0x8d/0xd0
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x62/0xc7
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Co-authored-by: Chunwei Chen <david.chen@nutanix.com>
Closes#17546
In syncing mode, zfs_putpages() would put the entire range of pages onto
the ZIL, then return VM_PAGER_OK for each page to the kernel. However,
an associated zil_commit() or txg sync had not happened at this point,
so the write may not actually be on disk.
So, we rework that case to use a ZIL commit callback, and do the
post-write work of undirtying the page and signaling completion there.
We return VM_PAGER_PEND to the kernel instead so it knows that we will
take care of it.
The original version of this (238eab7dc1) copied the Linux model and did
the cleanup in a ZIL callback for both async and sync. This was a
mistake, as FreeBSD does not have a separate "busy for writeback" flag
like Linux which keeps the page usable. The full sbusy flag locks the
entire page out until the itx callback fires, which for async is after
txg sync, which could be literal seconds in the future.
For the async case, the data is already on the DMU and the in-memory
ZIL, which is sufficient for async writeback, so the old method of
logging it without a callback, undirtying the page and returning is more
than sufficient and reclaims that lost performance.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17533
This causes async putpages to leave the pages sbusied for a long time,
which hurts concurrency. Revert for now until we have a better
approach.
This reverts commit 238eab7dc1.
Reported by: Ihor Antonov <ngor@hugpoint.tech>
Discussed with: Rob Norris <rob.norris@klarasystems.com>
References: freebsd/freebsd-src@738a9a7
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Ported-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17533
In FreeBSD there is now a pathconf name _PC_HAS_HIDDENSYSTEM.
This patch adds support for it to OpenZFS.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17518
The field is subsequently accessed in zfs_mknode(), in
zfs_inherit_projid(). The Linux implementation of zfs_create_fs() has
this initialization already; there is no counterpart to
zfs_create_share_dir() that I can see.
Reported-by: KMSAN
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#17486
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17443
While FreeBSD itself does not support projects, there is no reason
why it can't be controlled via `zfs project` and other subcommands.
Most of the code is actually already there and just needs some
revival and sync with Linux, plus enabling some tests not depending
on the OS support.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17423
zfs_putpages() would put the entire range of pages onto the ZIL, then
return VM_PAGER_OK for each page to the kernel. However, an associated
zil_commit() or txg sync had not happened at this point, so the write
may not actually be on disk.
So, we rework it to use a ZIL commit callback, and do the post-write
work of undirtying the page and signaling completion there. We return
VM_PAGER_PEND to the kernel instead so it knows that we will take care
of it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17445
If the kernel will honour our error returns, use them. If not, fool it
by setting a writeback error on the superblock, if available.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
If the pool is suspended, we'll just block in zil_commit(). If the
system is shutting down, blocking wouldn't help anyone. So, we should
keep this test for now, but at least return an error for anyone who is
actually interested.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
The superblock pointer will always be set, as will z_log, so remove code
supporting cases that can't occur (on Linux at least).
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
* zfs_link: allow tempfile sync to fail if pool suspends
4653e2f7d3 (#17355) allows dmu_tx_assign() to fail if the pool suspends
when failmode=continue, but zfs_link() can fall back to
txg_wait_synced() if it has to wait for a tempfile to be fully created
before continuing, which will block if the pool suspends.
Handle this by requesting an error return if the pool suspends when
failmode=continue, and if that happens, return EIO.
* zfs_clone_range: allow dirty wait to fail if pool suspends
4653e2f7d3 (#17355) allows dmu_tx_assign() to fail if the pool suspends
when failmode=continue, but zfs_clone_range() can fall back to
txg_wait_synced() if it has to wait for a dirty block to be written out,
which will block if the pool suspends.
Handle this by requesting an error return if the pool suspends when
failmode=continue, and if that happens, return EIO.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17413
The module parameter name was not changed in FreeBSD sysctls
list: 'vfs.zfs.vol.mode'. Also, on Linux side the name is:
/sys/module/zfs/parameters/zvol_volmode.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17386
