On i386, Clang complains about misaligned atomic operations. Silence
these warnings to fix the build on FreeBSD/i386.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored by: ConnectWise
Closes#17708
A single slow responding disk can affect the overall read
performance of a raidz group. When a raidz child disk is
determined to be a persistent slow outlier, then have it
sit out during reads for a period of time. The raidz group
can use parity to reconstruct the data that was skipped.
Each time a slow disk is placed into a sit out period, its
`vdev_stat.vs_slow_ios count` is incremented and a zevent
class `ereport.fs.zfs.delay` is posted.
The length of the sit out period can be changed using the
`raid_read_sit_out_secs` module parameter. Setting it to
zero disables slow outlier detection.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Contributions-by: Don Brady <don.brady@klarasystems.com>
Contributions-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17227
glibc includes linux/stat.h for statx, but musl defines its own statx
struct and associated constants, which does not include STATX_MNT_ID
yet. Thus, including linux/stat.h directly should be avoided for
maximum libc compatibility.
Tested on:
- glibc: x86_64, i686, aarch64, armv7l, armv6l
- musl: x86_64, aarch64, armv7l, armv6l
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-By: Achill Gilgenast <achill@achill.org>
Signed-off-by: classabbyamp <dev@placeviolette.net>
Closes#17675
All of zpool_find_config() callers now set lpc_printerr. Actually
printing the errors when pool can not be found should make zdb a
half percent less confusing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17642
Back in 2014 the zfs_autoimport_disable module option was added to
control whether the kmods should load the pool configs from the cache
file on module load. The default value since that time has been for
the kernel to not process the cache file.
Detecting and importing pools during boot is now controlled outside
of the kmod on both Linux and FreeBSD. By all accounts this has been
working well and we can remove this dormant code on the kernel side.
The spa_config_load() function is has been moved to userspace, it is
now only used by libzpool. Additionally, the spa_boot_init() hook
which was used by FreeBSD now looks to be used and was removed.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17618
This uses the AVX2 versions of the AESENC and PCLMULQDQ instructions; on
Zen 3 this provides an up to 80% performance improvement.
Original source:
d5440dd2c2/gen/bcm/aes-gcm-avx2-x86_64-linux.S
See the original BoringSSL commit at
3b6e1be439.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Joel Low <joel@joelsplace.sg>
Closes#17058
This changes zil_commit() to have an int return, and updates all callers
to check it. There are no corresponding internal changes yet; it will
always return 0.
Since zil_commit() is an indication that the caller _really_ wants the
associated data to be durability stored, I've annotated it with the
__warn_unused_result__ compiler attribute (via __must_check), to emit a
warning if it's ever ussd without doing something with the return code.
I hope this will mean we never misuse it in the future.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Based on previous commit this implements `zfs rewrite -P` flag,
making ZFS to keep blocks logical birth times while rewriting
files. It should exclude the rewritten blocks from incremental
sends, snapshot diffs, etc. Snapshots space usage same time will
reflect the additional space usage from newly allocated blocks.
Since this begins to use new "rewrite" flag in the block pointers,
this commit introduces a new read-compatible per-dataset feature
physical_rewrite. It must be enabled for the command to not fail,
it is activated on first use and deactivated on deletion of the
last affected dataset.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17565
During regular block writes ZFS sets both logical and physical
birth times equal to the current TXG. During dedup and block
cloning logical birth time is still set to the current TXG, but
physical may be copied from the original block that was used.
This represents the fact that logically user data has changed,
but the physically it is the same old block.
But block rewrite introduces a new situation, when block is not
changed logically, but stored in a different place of the pool.
From ARC, scrub and some other perspectives this is a new block,
but for example for user applications or incremental replication
it is not. Somewhat similar thing happen during remap phase of
device removal, but in that case space blocks are still acounted
as allocated at their logical birth times.
This patch introduces a new "rewrite" flag in the block pointer
structure, allowing to differentiate physical rewrite (when the
block is actually reallocated at the physical birth time) from
the device reval case (when the logical birth time is used).
The new functionality is not used at this point, and the only
expected change is that error log is now kept in terms of physical
physical birth times, rather than logical, since if a block with
logged error was somehow rewritten, then the previous error does
not matter any more.
This change also introduces a new TRAVERSE_LOGICAL flag to the
traverse code, allowing zfs send, redact and diff to work in
context of logical birth times, ignoring physical-only rewrites.
It also changes nothing at this point due to lack of those writes,
but they will come in a following patch.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17565
This feature enables tracking of when TXGs are committed to disk,
providing an estimated timestamp for each TXG.
With this information, it becomes possible to perform scrubs based
on specific date ranges, improving the granularity of data
management and recovery operations.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16853
Now zvol minors creation logic is passed thru spa_zvol_taskq, like it
is doing for remove/rename zvol minors functions. Appropriate
zvol minors creation functions are refactored:
- The zvol_create_minor()/zvol_minors_create_recursive() were removed.
- The single zvol_create_minors() is added instead.
Also, it become possible to collect zvol minors subtasks status, to
detect, if some zvol minor subtask is failed in the subtasks chain.
The appropriate message is reported to zfs_dbgmsg buffer in this case.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17575
During original block cloning implementation a mistake was made,
making BRT ZAP entries an array of 8 1-byte entries instead of 1
entry of 8 bytes. This makes the pools non-endian-safe.
This commit introduces a new read-compatible pool feature
"com.truenas:block_cloning_endian", fixing the endianness issue
for new pools while maintaining compatibility with existing ones.
The feature is automatically activated when creating the first BRT
ZAP (ensuring we don't activate it on pools that already have BRT
entries in the old format). When active, BRT entries are stored
as single 8-byte values.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17572
Add support for the '-a | --all' option to perform trim,
scrub, and initialize operations on all pools.
Previously, specifying a pool name was mandatory for
these operations. With this enhancement, users can now
execute these operations across all pools at once,
without needing to manually iterate over each pool
from the command line.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes#17524
These are all cases where we initialise or update a variable, and then
never use it. None of them particularly matter, as the compiler should
optimise them all away during dead store elimination, but some static
analysers complain about them and they are extra work for casual readers
to follow, so worth removing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
Removes the old dlsym() based option setter and adds a new
function handle_tunable_option() that can set, get and list all the
tunables in the system. And then wire it up to zdb and ztest.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17537
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17537
For each tunable declaration, we create a zfs_tunable_t with its
details, and then a pointer to it in the 'zfs_tunables' ELF section,
that we can access later with a little support from the linker.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17537
mod.h only exists to include the platform-specific mod_os.h, so we can
get rid of it and just call the platform header mod.h.
Then, create a libspl mod.h, and move the relevant items to it so we can
start building on it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17537
ZFS gang block headers are currently fixed at 512 bytes. This is
increasingly wasteful in the era of larger disk sector sizes. This PR
allows any size allocation to work as a gang header. It also contains
supporting changes to ZDB to make gang headers easier to work with.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17004
Adds a featureflag that is not enabled during upgrades unless listed
explicitly. This is useful for features that could cause issues unless
applied carefully; for example, a feature that could make a root pool
unbootable if bootloaders don't yet have support for it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17004
Use statx to verify that path-based unmounts proceed only if the
mountpoint reported by statx matches the MNTTAB entry reported by
libzfs, aborting the operation if they differ. Align
`zfs umount /path` behavior with `zfs umount dataset`.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17481
special_small_blocks is applied to blocks after compression, so it
makes no sense to demand its values to be power of 2. At most
they could be multiple of 512, but that would still buy us nothing,
so lets allow them be any within SPA_MAXBLOCKSIZE.
Also special_small_blocks does not really need to depend on the
set recordsize, enabled pool features or presence of special vdev.
At worst in any of those cases it will just do nothing, so we
should not complicate users lives by artificial limitations.
While there, polish comments for recordsize and volblocksize.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17497
5b9e695 added specific userspace versions of abd_os.h and abd_impl_os.h
for libzpool. However, abd.h and abd_impl.h, which include them, are
packaged with libzfs, so other programs building against libzfs can
fail to build, either because the headers aren't installed, or because
they aren't on any standard include path.
So, move abd_os.h and abd_impl_os.h to libspl, where they we will be
installed alongside abd.h and abd_impl.h in a known path.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16940Closes#17390Closes#17394
Usually the IO type can be inferred from the other fields (in
particular, priority and flags) sometimes it's not easy to see. This is
just another little debug helper.
May 27 2025 00:54:54.024110493 ereport.fs.zfs.data
class = "ereport.fs.zfs.data"
ena = 0x1f5ecfae600801
...
zio_delta = 0x0
zio_type = 0x2 [WRITE]
zio_priority = 0x3 [ASYNC_WRITE]
zio_objset = 0x0
Document zio_type and zio_priority.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17381
2aa3fbe761 extended zinject_record_t, and in doing so inadvertently
extended zfs_cmd_t, which broke compatibility with userspace tools
without the change.
This fixes that by using some of the unused space in zfs_cmd_t for the
extra fields. We also add an assert to trigger a compile error if the
size ever changes.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17367
In truenas_pylibzfs, we query list of encrypted datasets several times,
which is expensive. This commit exposes a public API zfs_is_encrypted()
to get encryption status from fast stat path without having to refresh
the properties.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17368
When set, dumps all ZFS ioctl calls and returns and their nvlists to
STDERR, to make debugging and understanding a lot easier.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17344
Name the OS-specific call lzc_ioctl_fd_os(), and make lzc_ioctl_fd()
wrap it, so we can do more in the wrapper.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17344
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17344
Currently, commands that resume a scrub/errorscrub from a paused state
don't get logged in the pool history. This is because resumes actually
return ECANCELED, instead of 0. This causes the tsd code in the common
ioctl logic to not think the ioctl succeeded, which causes the
log_history ioctl to fail with EPERM. However, for resuming a scrub from
a paused state, ECANCELED is success.
There are two options for how to deal with this. The first is the one
that I implemented here; I can't find a good reason for dmu_scan to
return ECANCELED on resume instead of 0, so let's just not. The only
place we check for the ECANCELED value is in zpool_scan, where we just
convert it back to zero. However, I am aware that this is changing an
ioctl interface, which I believe is a breaking change. I don't think
it's an important change, but maybe there is someone who relies on it.
The other option that could be implemented is to either allow ECANCELED
specifically from dsl_scan in the common ioctl code, or add a generic
facility to the common ioctl code that allows each command to specify
whether or not success happened, regardless of the return values. I am
open to feedback on which option people think would be better.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#17301
Before Direct I/O was implemented, I've implemented lighter version
I called Uncached I/O. It uses normal DMU/ARC data path with some
optimizations, but evicts data from caches as soon as possible and
reasonable. Originally I wired it only to a primarycache property,
but now completing the integration all the way up to the VFS.
While Direct I/O has the lowest possible memory bandwidth usage,
it also has a significant number of limitations. It require I/Os
to be page aligned, does not allow speculative prefetch, etc. The
Uncached I/O does not have those limitations, but instead require
additional memory copy, though still one less than regular cached
I/O. As such it should fill the gap in between. Considering this
I've disabled annoying EINVAL errors on misaligned requests, adding
a tunable for those who wants to test their applications.
To pass the information between the layers I had to change a number
of APIs. But as side effect upper layers can now control not only
the caching, but also speculative prefetch. I haven't wired it to
VFS yet, since it require looking on some OS specifics. But while
there I've implemented speculative prefetch of indirect blocks for
Direct I/O, controllable via all the same mechanisms.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Fixes#17027
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
When forced to resort to ganging, ZFS currently allocates three child
blocks, each one third of the size of the original. This is true
regardless of whether larger allocations could be made, which would
allow us to have fewer gang leaves. This improves performance when
fragmentation is high enough to require ganging, but not so high that
all the free ranges are only just big enough to hold a third of the
recordsize. This is also useful for improving the behavior of a future
change to allow larger gang headers.
We add the ability for the allocation codepath to allocate a range of
sizes instead of a single fixed size. We then use this to pre-allocate
the DVAs for the gang children. If those allocations fail, we fall back
to the normal write path, which will likely re-gang.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When multiple snapshots prevent the destruction/rollback of the
respective dataset/snapshot/volume via zfs destroy or zfs rollback,
the error message does not list the blocking snapshots sorted
according to their order of creation. This causes inconvenience and can
lead to confusion, and also creates a contrast with a returned message
from zfs list -t snap function.
Closes: #12751
Signed-off-by: Artem-OSSRevival <artem.vlasenko@ossrevival.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
### Background
Various admin operations will be invoked by some userspace task, but the
work will be done on a separate kernel thread at a later time. Snapshots
are an example, which are triggered through zfs_ioc_snapshot() ->
dsl_dataset_snapshot(), but the actual work is from a task dispatched to
dp_sync_taskq.
Many such tasks end up in dsl_enforce_ds_ss_limits(), where various
limits and permissions are enforced. Among other things, it is necessary
to ensure that the invoking task (that is, the user) has permission to
do things. We can't simply check if the running task has permission; it
is a privileged kernel thread, which can do anything.
However, in the general case it's not safe to simply query the task for
its permissions at the check time, as the task may not exist any more,
or its permissions may have changed since it was first invoked. So
instead, we capture the permissions by saving CRED() in the user task,
and then using it for the check through the secpolicy_* functions.
### Current implementation
The current code calls CRED() to get the credential, which gets a
pointer to the cred_t inside the current task and passes it to the
worker task. However, it doesn't take a reference to the cred_t, and so
expects that it won't change, and that the task continues to exist. In
practice that is always the case, because we don't let the calling task
return from the kernel until the work is done.
For Linux, we also take a reference to the current task, because the
Linux credential APIs for the most part do not check an arbitrary
credential, but rather, query what a task can do. See
secpolicy_zfs_proc(). Again, we don't take a reference on the task, just
a pointer to it.
### Changes
We change to calling crhold() on the task credential, and crfree() when
we're done with it. This ensures it stays alive and unchanged for the
duration of the call.
On the Linux side, we change the main policy checking function
priv_policy_ns() to use override_creds()/revert_creds() if necessary to
make the provided credential active in the current task, allowing the
standard task-permission APIs to do the needed check. Since the task
pointer is no longer required, this lets us entirely remove
secpolicy_zfs_proc() and the need to carry a task pointer around as
well.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This commit adds support for using llvm-libunwind for kernels built
using llvm and clang. The two differences are that the largest register
index is given by _LIBUNWIND_HIGHEST_DWARF_REGISTER, we need to check
whether the register is a floating point register and the prototype
for unw_regname takes the unwind cursor as the first argument.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Sebastian Pauka <me@spauka.se>
Closes#17230
Add nvlist_snprintf() to print a nvlist to a buffer. This is basically
the snprintf() version of dump_nvlist(). Along with that, add a
zfs_dbgmsg_nvlist() to print out an nvlist to dbgmsg. This will aid in
debugging.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17215
- Fix VERIFY3B() when given non-boolean values.
- Map EQUIV() into VERIFY3B(,==,) as equivalent.
- Tune messages for better readability and to closer match source
code for easier search. Unify user-space messages with kernel.
- Tune printed types and remove %px outside of Linux kernel.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: @ImAwsumm
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Various tools will display draid vdev names with parameters embedded in
them, but would not accept them as valid vdev names when looking them
up, making it difficult to build pipelines involving draid vdevs.
This commit makes it so that if a full draid name is offered for match,
it gets truncated at the first ':' character.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Update zfs userspace, groupspace, and projectspace to display the
default quotas when no per-ID specific quota is configured. This
ensures tool outputs align with enforced limits.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This adds default userquota, groupquota, and projectquota properties to
MASTER_NODE_OBJ to make them accessible during zfsvfs_init() (regular
DSL properties require dsl_config_lock, which cannot be safely acquired
in this context). The zfs_fill_zplprops_impl() logic is updated to read
these default properties directly from MASTER_NODE_OBJ.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
