The zvol blk-mq codepaths would erroneously send FLUSH and TRIM
commands down the read codepath, rather than write. This fixes
the issue, and updates the zvol_misc_fua test to verify that
sync writes are actually happening.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17761Closes#17765
Traditionally, unused dentries would be cached in the dentry cache until
the associated entry is no longer on disk. The cached dentry continues
to hold an inode reference, causing the inode to be pinned (see previous
commit).
Here we implement the dentry op d_delete, which is roughly analogous to
the drop_inode superblock op, and add a zfs_delete_dentry tunable to
control its behaviour. By default it continues the traditional
behaviour, but when the tunable is enabled, we signal that an unused
dentry should be freed immediately, releasing its inode reference, and
so allowing that inode to be deleted if no longer in use.
Sponsored-by: Klara, Inc.
Sponsored-by: Fastmail Pty Ltd
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17746
A single slow responding disk can affect the overall read
performance of a raidz group. When a raidz child disk is
determined to be a persistent slow outlier, then have it
sit out during reads for a period of time. The raidz group
can use parity to reconstruct the data that was skipped.
Each time a slow disk is placed into a sit out period, its
`vdev_stat.vs_slow_ios count` is incremented and a zevent
class `ereport.fs.zfs.delay` is posted.
The length of the sit out period can be changed using the
`raid_read_sit_out_secs` module parameter. Setting it to
zero disables slow outlier detection.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Contributions-by: Don Brady <don.brady@klarasystems.com>
Contributions-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17227
While rw_destroy() may do nothing on Linux, we still want to make sure
that we don't have any holders outstanding like we do for mutexes.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17718
We only have extremely narrow uses, so move it all into a single
function that does only what we need, with and without d_set_d_op().
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17621
glibc includes linux/stat.h for statx, but musl defines its own statx
struct and associated constants, which does not include STATX_MNT_ID
yet. Thus, including linux/stat.h directly should be avoided for
maximum libc compatibility.
Tested on:
- glibc: x86_64, i686, aarch64, armv7l, armv6l
- musl: x86_64, aarch64, armv7l, armv6l
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-By: Achill Gilgenast <achill@achill.org>
Signed-off-by: classabbyamp <dev@placeviolette.net>
Closes#17675
Rename `zcw_zio_error` to `zcw_error` in `trace_zil.h` that was missed
in commit f562e0f69. This fixes compilation errors exposed when building
with `--with-linux=`.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17654
This uses the AVX2 versions of the AESENC and PCLMULQDQ instructions; on
Zen 3 this provides an up to 80% performance improvement.
Original source:
d5440dd2c2/gen/bcm/aes-gcm-avx2-x86_64-linux.S
See the original BoringSSL commit at
3b6e1be439.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Joel Low <joel@joelsplace.sg>
Closes#17058
This changes zil_commit() to have an int return, and updates all callers
to check it. There are no corresponding internal changes yet; it will
always return 0.
Since zil_commit() is an indication that the caller _really_ wants the
associated data to be durability stored, I've annotated it with the
__warn_unused_result__ compiler attribute (via __must_check), to emit a
warning if it's ever ussd without doing something with the return code.
I hope this will mean we never misuse it in the future.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17398
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17591
Currently we fail the compilation via the #error directive if
`HAVE_XSAVE` isn't defined. This breaks i586 builds since we check
the toolchains SIMD support only on i686 and onward.
Remove the requirement to fix the build on i586.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#13303Closes#17590
All this machinery is there to try to understand when there an async
writeback waiting to complete because the intent log callbacks are still
outstanding, and force them with a timely zil_commit(). The next commit
fixes this properly, so there's no need for all this extra housekeeping.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17584
Avoid calling dbuf_evict_one() from memory reclaim contexts (e.g. Linux
kswapd, FreeBSD pagedaemon). This prevents deadlock caused by reclaim
threads waiting for the dbuf hash lock in the call sequence:
dbuf_evict_one -> dbuf_destroy -> arc_buf_destroy
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Kaitlin Hoang <kthoang@amazon.com>
Closes#17561
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17580
FreeBSD commit 2ec2ba7e232d added the Solaris style syscall interface
for extended attributes. This patch wires this interface into the
FreeBSD ZFS port, since this style of extended attributes is supported
by OpenZFS internally when the "xattr" property is set to "dir".
Some specific changes:
LOOKUP_NAMED_ATTR is defined to indicate the need to set V_NAMEDATTR
for calls to zfs_zaccess().
V_NAMEDATTR indicates that the access checking does need to be done
for FreeBSD.
The access checking code for extended attributes was copy/pasted from
the Linux port into zfs_zaccess() in the FreeBSD port.
Most of the changes are in zfs_freebsd_lookup() and
zfs_freebsd_create().
The semantics of these functions should remain unchanged unless named
attributes are being manipulated.
All the code changes are enabled for __FreeBSD_version 1500040 and
newer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17540
Seems like we haven't set it since the SPL was pulled into the main ZFS
tree. In removing the define, I've taken the 64-bit version (ie the one
that _hasn't_ been running since back then) because it looks like its
closer to the intended width by the way its used.
Since the macros ar eno longer needed as a selector, pull those too.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Sponsored-by: https://despairlabs.com/sponsor/Closes#17551
On Linux, when doing path lookup with LOOKUP_RCU, dentry and inode can
be dereferenced without refcounts and locks. For this reason, dentry and
inode must only be freed after RCU grace period.
However, zfs currently frees inode in zfs_inode_destroy synchronously
and we can't use GPL-only call_rcu() in zfs directly. Fortunately, on
Linux 5.2 and after, if we define sops->free_inode(), the kernel will do
call_rcu() for us.
This issue may be triggered more easily with init_on_free=1 boot
parameter:
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:selinux_inode_permission+0x10e/0x1c0
Call Trace:
? show_trace_log_lvl+0x1be/0x2d9
? show_trace_log_lvl+0x1be/0x2d9
? show_trace_log_lvl+0x1be/0x2d9
? security_inode_permission+0x37/0x60
? __die_body.cold+0x8/0xd
? no_context+0x113/0x220
? exc_page_fault+0x6d/0x130
? asm_exc_page_fault+0x1e/0x30
? selinux_inode_permission+0x10e/0x1c0
security_inode_permission+0x37/0x60
link_path_walk.part.0.constprop.0+0xb5/0x360
? path_init+0x27d/0x3c0
path_lookupat+0x3e/0x1a0
filename_lookup+0xc0/0x1d0
? __check_object_size.part.0+0x123/0x150
? strncpy_from_user+0x4e/0x130
? getname_flags.part.0+0x4b/0x1c0
vfs_statx+0x72/0x120
? ioctl_has_perm.constprop.0.isra.0+0xbd/0x120
__do_sys_newlstat+0x39/0x70
? __x64_sys_ioctl+0x8d/0xd0
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x62/0xc7
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Co-authored-by: Chunwei Chen <david.chen@nutanix.com>
Closes#17546
In syncing mode, zfs_putpages() would put the entire range of pages onto
the ZIL, then return VM_PAGER_OK for each page to the kernel. However,
an associated zil_commit() or txg sync had not happened at this point,
so the write may not actually be on disk.
So, we rework that case to use a ZIL commit callback, and do the
post-write work of undirtying the page and signaling completion there.
We return VM_PAGER_PEND to the kernel instead so it knows that we will
take care of it.
The original version of this (238eab7dc1) copied the Linux model and did
the cleanup in a ZIL callback for both async and sync. This was a
mistake, as FreeBSD does not have a separate "busy for writeback" flag
like Linux which keeps the page usable. The full sbusy flag locks the
entire page out until the itx callback fires, which for async is after
txg sync, which could be literal seconds in the future.
For the async case, the data is already on the DMU and the in-memory
ZIL, which is sufficient for async writeback, so the old method of
logging it without a callback, undirtying the page and returning is more
than sufficient and reclaims that lost performance.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17533
This causes async putpages to leave the pages sbusied for a long time,
which hurts concurrency. Revert for now until we have a better
approach.
This reverts commit 238eab7dc1.
Reported by: Ihor Antonov <ngor@hugpoint.tech>
Discussed with: Rob Norris <rob.norris@klarasystems.com>
References: freebsd/freebsd-src@738a9a7
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Ported-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17533
mod.h only exists to include the platform-specific mod_os.h, so we can
get rid of it and just call the platform header mod.h.
Then, create a libspl mod.h, and move the relevant items to it so we can
start building on it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17537
We're not supposed to modify someone else's io_flags, so we need another
way to propagate DIO_CHKSUM_ERR.
If we squint, we can see that io_reexecute is really just recording
exceptional events that a parent (or its parents) will need to do
something about. It just happens that the only things we've had
historically are two forms of reexecution: now or later (suspend).
So, rename it to io_post, as in, post-IO info/events/actions. And now we
have a few spare bits for other conditions.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17507
This allows to change the meaning of priority differences in FreeBSD
without requiring code changes in ZFS.
This upstreams commit fd141584cf89d7d2 from FreeBSD src.
Sponsored-by: The FreeBSD Foundation
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Olivier Certner <olce@FreeBSD.org>
Closes#17489
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17443
zfs_putpages() would put the entire range of pages onto the ZIL, then
return VM_PAGER_OK for each page to the kernel. However, an associated
zil_commit() or txg sync had not happened at this point, so the write
may not actually be on disk.
So, we rework it to use a ZIL commit callback, and do the post-write
work of undirtying the page and signaling completion there. We return
VM_PAGER_PEND to the kernel instead so it knows that we will take care
of it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17445
The module parameter now is represented in FreeBSD sysctls list with
name: 'vfs.zfs.vol.inhibit_dev'. The default value is '0', same as on
Linux side.
Sponsored-by: vStack, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#17384
This was fully removed from Linux in 4.15, so we won't be seeing it
again.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Since 3.17 Linux has provided param ops for 64-bit ints, so we don't
need to use our own anymore.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Nothing uses them now.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Nothing in any FreeBSD code uses them.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
I've found that QEMU/KVM guest memory accounted as shared also
included into NR_FILE_PAGES. But it is actually a non-evictable
anonymous memory. Using it as a base for zfs_arc_pc_percent
parameter makes ARC to ignore shrinker requests while page cache
does not really have anything to evict, ending up in OOM killer
killing the QEMU process.
Instead use of NR_ACTIVE_FILE + NR_INACTIVE_FILE should represent
the part of a page cache that is actually evictable, which should
be safer to use as a reference for ARC scaling.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17334
For UIO_ITER, we are just wrapping a kernel iterator. It will take care
of its own offsets if necessary. We don't need to do anything, and if we
do try to do anything with it (like advancing the iterator by the skip
in zfs_uio_advance) we're just confusing the kernel iterator, ending up
at the wrong position or worse, off the end of the memory region.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17298
These are only required to support these ioctls on Linux <4.5. Since
4.18 is our cutoff, we don't need this code anymore.
Also removing related test things that will never match again.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17308
### Background
Various admin operations will be invoked by some userspace task, but the
work will be done on a separate kernel thread at a later time. Snapshots
are an example, which are triggered through zfs_ioc_snapshot() ->
dsl_dataset_snapshot(), but the actual work is from a task dispatched to
dp_sync_taskq.
Many such tasks end up in dsl_enforce_ds_ss_limits(), where various
limits and permissions are enforced. Among other things, it is necessary
to ensure that the invoking task (that is, the user) has permission to
do things. We can't simply check if the running task has permission; it
is a privileged kernel thread, which can do anything.
However, in the general case it's not safe to simply query the task for
its permissions at the check time, as the task may not exist any more,
or its permissions may have changed since it was first invoked. So
instead, we capture the permissions by saving CRED() in the user task,
and then using it for the check through the secpolicy_* functions.
### Current implementation
The current code calls CRED() to get the credential, which gets a
pointer to the cred_t inside the current task and passes it to the
worker task. However, it doesn't take a reference to the cred_t, and so
expects that it won't change, and that the task continues to exist. In
practice that is always the case, because we don't let the calling task
return from the kernel until the work is done.
For Linux, we also take a reference to the current task, because the
Linux credential APIs for the most part do not check an arbitrary
credential, but rather, query what a task can do. See
secpolicy_zfs_proc(). Again, we don't take a reference on the task, just
a pointer to it.
### Changes
We change to calling crhold() on the task credential, and crfree() when
we're done with it. This ensures it stays alive and unchanged for the
duration of the call.
On the Linux side, we change the main policy checking function
priv_policy_ns() to use override_creds()/revert_creds() if necessary to
make the provided credential active in the current task, allowing the
standard task-permission APIs to do the needed check. Since the task
pointer is no longer required, this lets us entirely remove
secpolicy_zfs_proc() and the need to carry a task pointer around as
well.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
- Fix VERIFY3B() when given non-boolean values.
- Map EQUIV() into VERIFY3B(,==,) as equivalent.
- Tune messages for better readability and to closer match source
code for easier search. Unify user-space messages with kernel.
- Tune printed types and remove %px outside of Linux kernel.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: @ImAwsumm
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This adds default userquota, groupquota, and projectquota properties to
MASTER_NODE_OBJ to make them accessible during zfsvfs_init() (regular
DSL properties require dsl_config_lock, which cannot be safely acquired
in this context). The zfs_fill_zplprops_impl() logic is updated to read
these default properties directly from MASTER_NODE_OBJ.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
FreeBSD nowadays supports FPU in the kernel on powerpc*, so enable it.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Piotr Kubaj <pkubaj@FreeBSD.org>
Closes#17191
Module names are mapped directly to directory names in procfs, but
nothing is done to create the intermediate directories, or remove them.
This makes it impossible to sensibly present kstats about sub-objects.
This commit loops through '/'-separated names in the full module name,
creates a separate module for each, and hooks them up with a parent
pointer and child counter, and then unrolls this on the other side when
deleting a module.
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
since 4.10, bio->bi_opf needs to be checked to determine all kinds of
flush requests. this was the case prior to the commit referenced below,
but the order of ifdefs was not the usual one (newest up top), which
might have caused this to slip through.
this fixes a regression when using zvols as Qemu block devices, but
might have broken other use cases as well. the symptoms are that all
sync writes from within a VM configured to use such a virtual block
devices are ignored and treated as async writes by the host ZFS layer.
this can be verified using fio in sync mode inside the VM, for example
with
fio \
--filename=/dev/sda --ioengine=libaio --loops=1 --size=10G \
--time_based --runtime=60 --group_reporting --stonewall --name=cc1 \
--description="CC1" --rw=write --bs=4k --direct=1 --iodepth=1 \
--numjobs=1 --sync=1
which shows an IOPS number way above what the physical device underneath
supports, with "zpool iostat -r 1" on the hypervisor side showing no
sync IO occuring during the benchmark.
with the regression fixed, both fio inside the VM and the IO stats on
the host show the expected numbers.
Fixes: 846b598519
"config: remove HAVE_REQ_OP_* and HAVE_REQ_*"
Signed-off-by: Fabian-Gruenbichler <f.gruenbichler@proxmox.com>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Originally #16856 updated Linux Direct I/O requests to use the new
pin_user_pages API. However, it was an oversight that this PR only
handled iov_iter's of type ITER_IOVEC and ITER_UBUF. Other iov_iter
types may try and use the pin_user_pages API if it is available. This
can lead to panics as the iov_iter is not being iterated over correctly
in zfs_uio_pin_user_pages().
Unfortunately, generic iov_iter API's that call pin_user_page_fast() are
protected as GPL only. Rather than update zfs_uio_pin_user_pages() to
account for all iov_iter types, we can simply just call
zfs_uio_get_dio_page_iov_iter() if the iov_iter type is not ITER_IOVEC
or ITER_UBUF. zfs_uio_get_dio_page_iov_iter() calls the
iov_iter_get_pages() calls that can handle any iov_iter type.
In the future it might be worth using the exposed iov_iter iterator
functions that are included in the header iov_iter.h since v6.7. These
functions allow for any iov_iter type to be iterated over and advanced
while applying a step function during iteration. This could possibly be
leveraged in zfs_uio_pin_user_pages().
A new ZFS test case was added to test that a ITER_BVEC is handled
correctly using this new code path. This test case was provided though
issue #16956.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16956Closes#17006
There were checks still in place to verify we could completely use
iov_iter's on the Linux side. All interfaces are available as of kernel
4.18, so there is no reason to check whether we should use that
interface at this point. This PR completely removes the UIO_USERSPACE
type. It also removes the check for the direct_IO interface checks.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16856
cstyle can handle these cases now, so we don't need to disable it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16840
