The Buildbot CI infrastructure has been fully replaced by GitHub
Actions. Remove any lingering references from the repository.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17794
Eliminates the need for the following workaround
> Add other drivers to dracut:
```
if grep mpt3sas /proc/modules; then
echo 'force_drivers+=" mpt3sas "' >> /etc/dracut.conf.d/zfs.conf
fi
if grep virtio_blk /proc/modules; then
echo 'filesystems+=" virtio_blk "' >> /etc/dracut.conf.d/fs.conf
fi
```
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jo Zzsi <jozzsicsataban@gmail.com>
Closes#17762
This commit fixes the issue and includes the zfs kernel
module even when dracut is used in hostonly mode.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jo Zzsi <jozzsicsataban@gmail.com>
Closes#17754
When attempting to debug performance problems on large systems, one of
the major factors that affect performance is free space
fragmentation. This heavily affects the allocation process, which is an
area of active development in ZFS. Unfortunately, fragmenting a large
pool for testing purposes is time consuming; it usually involves filling
the pool and then repeatedly overwriting data until the free space
becomes fragmented, which can take many hours. And even if the time is
available, artificial workloads rarely generate the same fragmentation
patterns as the natural workloads they're attempting to mimic.
This patch has two parts. First, in zdb, we add the ability to export
the full allocation map of the pool. It iterates over each vdev,
printing every allocated segment in the ms_allocatable range tree. This
can be done while the pool is online, though in that case the allocation
map may actually be from several different TXGs as new ones are loaded
on demand.
The second is a new subcommand for zhack, zhack metaslab leak (and its
supporting kernel changes). This is a zhack subcommand that imports a
pool and then modified the range trees of the metaslabs, allowing the
sync process to write them out normall. It does not currently store
those allocations anywhere to make them reversible, and there is no
corresponding free subcommand (which would be extremely dangerous); this
is an irreversible process, only intended for performance testing. The
only way to reclaim the space afterwards is to destroy the pool or roll
back to a checkpoint.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#17576
This commit synchronizes the debian packaging files with the distro
version (also maintained by me) as much as possible.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Colm Buckley <colm@tuatha.org>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#17712
As described in https://github.com/freebsd/freebsd-src/pull/1305,
FreeBSD's installer defaults to zroot/home for user home directories.
For FreeBSD only, set the default prefix for pam_zfs_key to match.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Eric A. Borisch <eborisch@gmail.com>
Closes#17600
Update the zfsunlock initramfs hook to provide instructions on how
to unlock the root filesystem when appropriate. The intent is to
make the dropbear ssh MOTD more user friendly.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Cong Zhang <13283869+congzhangzh@users.noreply.github.com>
Closes#17661Closes#17662
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#17633Closes#17646
6cf17f65 (#17456) introduced a change to `configure.ac` which
breaks the patching done in the Debian packages DKMS source
installation phase. This results in a failed module build.
Adapt the awk script doing the patching to handle the added
`AC_CONFIG_FILE` entry.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-by: Shengqi Chen <harry-chen@outlook.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#17633Closes#17646
This uses the AVX2 versions of the AESENC and PCLMULQDQ instructions; on
Zen 3 this provides an up to 80% performance improvement.
Original source:
d5440dd2c2/gen/bcm/aes-gcm-avx2-x86_64-linux.S
See the original BoringSSL commit at
3b6e1be439.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Joel Low <joel@joelsplace.sg>
Closes#17058
In e8f0aa143e, the SONAMEs and package
names for libzfs and libzpool were bumped. The `contrib/debian/control`
file did not declare a conflict/replacement with the old package name.
This can cause dpkg to leave a system in an inconsistent state if the
old package is not manually uninstalled first.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Shengqi Chen <harry-chen@outlook.com>
Signed-off-by: Patrick Fasano <patrick@patrickfasano.com>
Closes#17586
I got a newer shellcheck, and it pointed out that read without a target
variable is not POSIXly. The var was removed in c3ef9f7528, so I put it
back, and now shellcheck complains about an unused var. That's actually
correct, but necessary, so I've added a suppression for that, probably
better.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17626
Runs `zfs mount -R <dataset>` at boot, after `zfs mount -a`.
Intended to replace `mountpoint=legacy` in certain mount setups.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Meriel Luna Mittelbach <lunarlambda@gmail.com>
Closes#17483
This allows to rewrite content of specified file(s) as-is without
modifications, but at a different location, compression, checksum,
dedup, copies and other parameter values. It is faster than read
plus write, since it does not require data copying to user-space.
It is also faster for sync=always datasets, since without data
modification it does not require ZIL writing. Also since it is
protected by normal range range locks, it can be done under any
other load. Also it does not affect file's modification time or
other properties.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Currently, the zfs initramfs-tools boot script under local-top calls
`vgchange -ay`, which unconditionally activates all logical volumes
(LVs) in all discovered volume groups (VGs). This causes all LVs to be
active after boot. However, users may prefer to not activate certain
VGs/LVs on boot. They might normally use the `--setautoactivation n`
VG/LV flag or the `auto_activation_volume_list` LVM config option to
achieve this, but since the script unconditionally activates all LVs,
neither has an effect.
To fix this, call `vgchange -aay` instead. This triggers LVM
autoactivation, which honors autoactivation settings such as the
`--setautoactivation` flag. It is also more in line with the LVM
documentation, which says autoactivation is "meant to be used by
activation commands that are run automatically by the system" [1].
Note that this change might break misconfigured setups that have ZFS
on top of an LV for which autoactivation is disabled.
[1] https://gitlab.com/lvmteam/lvm2/-/blob/cff93e4d/conf/example.conf.in#L1579
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Friedrich Weber <f.weber@proxmox.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Introduced functionality to recursively mount datasets with a new
config option `mount_recursively`. Adjusted existing functions to
handle the recursive behavior and added tests to validate the feature.
This enhances support for managing hierarchical ZFS datasets within
a PAM context.
Signed-off-by: Jerzy Kołosowski <jerzy@kolosowscy.pl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
While mounting ZFS root during boot on Linux distributions from initrd,
mount from busybox is effectively used which executes mount system call
directly. This skips the ZFS helper mount.zfs, which checks and enables
the mount options as specified in dataset properties. As a result,
datasets mounted during boot from initrd do not have correct mount
options as specified in ZFS dataset properties.
There has been an attempt to use mount.zfs in zfs initrd script,
responsible for mounting the ZFS root filesystem (PR#13305). This was
later reverted (PR#14908) after discovering that using mount.zfs breaks
mounting of snapshots on root (/) and other child datasets of root have
the same issue (Issue#9461).
This happens because switching from busybox mount to mount.zfs correctly
parses the mount options but also adds 'mntpoint=/root' to the mount
options, which is then prepended to the snapshot mountpoint in
'.zfs/snapshot'. '/root' is the directory on Debian with initramfs-tools
where root filesystem is mounted before pivot_root. When Linux runtime
is reached, trying to access the snapshots on root results in
automounting the snapshot on '/root/.zfs/*', which fails.
This commit attempts to fix the automounting of snapshots on root, while
using mount.zfs in initrd script. Since the mountpoint of dataset is
stored in vfs_mntpoint field, we can check if current mountpoint of
dataset and vfs_mntpoint are same or not. If they are not same, reset
the vfs_mntpoint field with current mountpoint. This fixes the
mountpoints of root dataset and children in respective vfs_mntpoint
fields when we try to access the snapshots of root dataset or its
children. With correct mountpoint for root dataset and children stored
in vfs_mntpoint, all snapshots of root dataset are mounted correctly
and become accessible.
This fix will come into play only if current process, that is trying to
access the snapshots is not in chroot context. The Linux kernel API
that is used to convert struct path into char format (d_path), returns
the complete path for given struct path. It works in chroot environment
as well and returns the correct path from original filesystem root.
However d_path fails to return the complete path if any directory from
original root filesystem is mounted using --bind flag or --rbind flag
in chroot environment. In this case, if we try to access the snapshot
from outside the chroot environment, d_path returns the path correctly,
i.e. it returns the correct path to the directory that is mounted with
--bind flag. However inside the chroot environment, it only returns the
path inside chroot.
For now, there is not a better way in my understanding that gives the
complete path in char format and handles the case where directories from
root filesystem are mounted with --bind or --rbind on another path which
user will later chroot into. So this fix gets enabled if current
process trying to access the snapshot is not in chroot context.
With the snapshots issue fixed for root filesystem, using mount.zfs in
ZFS initrd script, mounts the datasets with correct mount options.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#16646
The ABI of libzfs and libzpool have breaking changes since last
SONAME bump in commit fe6babc:
* libzfs: `zpool_print_unsup_feat` removed (used by zpool cmd).
* libzpool: multiple `ddt_*` symbols removed (used by zdb cmd).
Bump them to avoid ABI breakage.
See: https://github.com/openzfs/zfs/pull/11817
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#16609
Properly distribute files for native Debian packages. This fixes the
issue with broken release tarballs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15404
Closes#15586
Requires the new 'flat' physical data which has the start
time for a class entry.
The amount to prune can be based on a target percentage of
the unique entries or based on the age (i.e., every entry
older than N days).
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16277
Commit 46ebd0a updated the build system to make symbolic link for zpool.
However, this commit did not update the automake file to also add the
symbolic link to the CLEANFILES variable. This is necessary so the link
is removed when running make clean/distclean.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16422
ln will fail if the target already exists, which causes make to bail
out. Adding -f makes it more "compiler-like", overwriting the target
instead.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16423
Currently user won't have completion of `zpool` command until they
trigger completion of `zfs` first. This patch adds a link to `zfs`,
thus user can use both to initialize the completion.
Fixes: #16320
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
This change adds a new `zpool prefetch -t ddt $pool` command which
causes a pool's DDT to be loaded into the ARC. The primary goal is to
remove the need to "warm" a pool's cache before deduplication stops
slowing write performance. It may also provide a way to reload portions
of a DDT if they have been flushed due to inactivity.
Sponsored-by: iXsystems, Inc.
Sponsored-by: Catalogics, Inc.
Sponsored-by: Klara, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Will Andrews <will.andrews@klarasystems.com>
Signed-off-by: Fred Weigel <fred.weigel@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Co-authored-by: Will Andrews <will.andrews@klarasystems.com>
Co-authored-by: Don Brady <don.brady@klarasystems.com>
Closes#15890
With seq x -1 z and x is less than z FreeBSD seq will print the error:
$ seq 1 -1 2
seq: needs positive increment
Hide this error. Alternatively $COMP_CWORD could be checked for < 2.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Derek Schrock <dereks@lifeofadishwasher.com>
Closes#16234
As for python-3.12 the distutils package has been deprecated.
The latest ax_python_devel.m4 macro from the autoconf archive
has been updated accordingly so let's pull in the new version.
We can also drop the changes made to our customized version
to continue if the development version is not installed since
this functionality has been included upstream.
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16126Closes#16129
Auto-generate changelog based off on @VERSION@ during configure,
so that it is not needed to be update with new releases / version
updates.
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
As shown in #15404#issuecomment-1765002181, Ubuntu kernel has
'Provides: zfs-dkms', which will cause uninstall of the kernel, when
attempting to install openzfs-zfs-dkms.
As a workaround remove the 'Conflicts: zfs-dkms' definition from
the debian control file.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mart Frauenlob <AllKind@fastest.cc>
Closes#15503
This feature allows disks to be added one at a time to a RAID-Z group,
expanding its capacity incrementally. This feature is especially useful
for small pools (typically with only one RAID-Z group), where there
isn't sufficient hardware to add capacity by adding a whole new RAID-Z
group (typically doubling the number of disks).
== Initiating expansion ==
A new device (disk) can be attached to an existing RAIDZ vdev, by
running `zpool attach POOL raidzP-N NEW_DEVICE`, e.g. `zpool attach tank
raidz2-0 sda`. The new device will become part of the RAIDZ group. A
"raidz expansion" will be initiated, and the new device will contribute
additional space to the RAIDZ group once the expansion completes.
The `feature@raidz_expansion` on-disk feature flag must be `enabled` to
initiate an expansion, and it remains `active` for the life of the pool.
In other words, pools with expanded RAIDZ vdevs can not be imported by
older releases of the ZFS software.
== During expansion ==
The expansion entails reading all allocated space from existing disks in
the RAIDZ group, and rewriting it to the new disks in the RAIDZ group
(including the newly added device).
The expansion progress can be monitored with `zpool status`.
Data redundancy is maintained during (and after) the expansion. If a
disk fails while the expansion is in progress, the expansion pauses
until the health of the RAIDZ vdev is restored (e.g. by replacing the
failed disk and waiting for reconstruction to complete).
The pool remains accessible during expansion. Following a reboot or
export/import, the expansion resumes where it left off.
== After expansion ==
When the expansion completes, the additional space is available for use,
and is reflected in the `available` zfs property (as seen in `zfs list`,
`df`, etc).
Expansion does not change the number of failures that can be tolerated
without data loss (e.g. a RAIDZ2 is still a RAIDZ2 even after
expansion).
A RAIDZ vdev can be expanded multiple times.
After the expansion completes, old blocks remain with their old
data-to-parity ratio (e.g. 5-wide RAIDZ2, has 3 data to 2 parity), but
distributed among the larger set of disks. New blocks will be written
with the new data-to-parity ratio (e.g. a 5-wide RAIDZ2 which has been
expanded once to 6-wide, has 4 data to 2 parity). However, the RAIDZ
vdev's "assumed parity ratio" does not change, so slightly less space
than is expected may be reported for newly-written blocks, according to
`zfs list`, `df`, `ls -s`, and similar tools.
Sponsored-by: The FreeBSD Foundation
Sponsored-by: iXsystems, Inc.
Sponsored-by: vStack
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Authored-by: Matthew Ahrens <mahrens@delphix.com>
Contributions-by: Fedor Uporov <fuporov.vstack@gmail.com>
Contributions-by: Stuart Maybee <stuart.maybee@comcast.net>
Contributions-by: Thorsten Behrens <tbehrens@outlook.com>
Contributions-by: Fmstrat <nospam@nowsci.com>
Contributions-by: Don Brady <dev.fs.zfs@gmail.com>
Signed-off-by: Don Brady <dev.fs.zfs@gmail.com>
Closes#15022
tested by running:
```
./configure --with-config=user; cp -a contrib/debian .
dpkg-buildpackage -b -uc -us
```
on a Debian 12 based system.
and checking where the completion file got installed.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Closes#15304
Follows b191f9a13d3005621ead9a727b811892264505ef from Debian's
packaging team at:
https://salsa.debian.org/zfsonlinux-team/zfs/
The previous build-dependency is kept as option, to still be able to
build on older Debian based distros (e.g. Ubuntu 20.04).
Without this building on Debian 12/bookworm does not work, as `dkms`
is a virtual package.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Closes#15304
Certain Linux distributions (Debian/Ubuntu at least) expect
bash-completion snippets to be installed in
/usr/share/bash-completion/completions instead of
/etc/bash_completion.d.
This patch sets the bashcompletiondir variable based on the vendor,
inspired by similar settings for initdir and initconfdir.
It seems that commit 612b8dff5b
caused the file to be installed in the first-place (thus the error
when building debian packages only became apparent when testing a
2.2.0-rc4 build)
The change only sets the variable in Makefile context - the
rpm/zfs.spec.in file has the path hardcoded as
%{_sysconfdir}/bash_completion.d/zfs, but since running
```
./configure --sysconfdir=/myetc ; make rpm
```
also results in all relevant files to be installed in /etc instead of
/myetc I assume this can remain as is.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Closes#15304
Have libzfs call a special `zfs_prepare_disk` script before a disk is
included into the pool. The user can edit this script to add things
like a disk firmware update or a disk health check. Use of the script
is totally optional. See the zfs_prepare_disk manpage for full details.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#15243
- Distribute zfs-[un]jail.8 on FreeBSD and zfs-[un]zone.8 on Linux
- zfsprops.7: mirror zoned/jailed, only available on respective platforms
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#15161
For Native Debian packaging, zinject binary and man page is
packaged in ZFS test package. zinject is not not directly related
to ZTS and should be packaged with other utilities, like it is
present in zfs_<ver>.rpm/deb packages.
This commit moves zinject binary and man page from openzfs-zfs-test
to openzfs-zfsutils package.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15160
Support mountpoint=legacy for the root dataset in the dracut zfs support
scripts.
mountpoint=/ or mountpoint=/sysroot also works.
Change zfs-env-bootfs.service to add zfsutil to BOOTFSFLAGS only for
root datasets with mountpoint != legacy.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Closes#15149
On my machines I observe random failures caused by rollback happening
after zfs root is mounted. I've observed two types of failures:
- zfs-rollback-bootfs.service fails saying that rollback must be
done just before mounting the dataset
- boot process fails and rescue console is entered.
After making this modification and testing it for couple of days
none of those problems have been observed anymore.
I don't know if `dracut-mount.service` is still needed in the
`After` directive. Maybe someone else is able to address this?
Reviewed-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com>
Signed-off-by: Wojciech Małota-Wójcik <59281144+outofforest@users.noreply.github.com>
Closes#15025
Add a new changelog entry for native packages to reflect version
2.2.99.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15054
The issue that this is designed to work around is only applicable to
glibc, since it's caused by glibc's pthread_cancel() implementation
using dlopen on libgcc_s.so.1 (and therefor not triggering dracut to
include it in the initramfs). This commit adds an extra condition to the
workaround that tests for glibc via "ldconfig -p | grep -qF 'libc.so.6'"
(which should only be present on glibc systems).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Violet Purcell <vimproved@inventati.org>
Closes#14992
There's usually no requirement that a user be logged in for changing
their password, so let's not be surprising here.
We need to use the fetch_lazy mechanism for the old password to avoid
a double prompt for it, so that mechanism is now generalized a bit.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Felix Dörre <felix@dogcraft.de>
Signed-off-by: Val Packett <val@packett.cool>
Closes#14834
