
Enable SWTPM_TEST_PROFILE for running the test_tpm2_ibmtss2 test cases with a user provided profile. Document it. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
1.5 KiB
This directory contains the swtpm tests.
To run the tests you need to build swtpm first and then you can run the tests using the following command line:
SWTPM_TEST_PROFILE='{"Name":"default-v1"}' \
SWTPM_TEST_EXPENSIVE=1 SWTPM_TEST_STORE_VOLATILE=1 SWTPM_TEST_IBMTSS2=1 make check
You may omit the environment variables if you don't want to run the more time-consuming tests.
SWTPM_TEST_EXPENSIVE=1
enables the following tests:
- test_tpm12
- test_tpm2_ibmtss2
- test_tpm2_libtpms_versions_profiles
SWTPM_TEST_STORE_VOLATILE=1
enables storing and restoring of the volatile
state at every step of the test_tpm2_ibmtss2 test. This environment
variable only has an effect if SWTPM_TEST_EXPENSIVE=1
is set.
SWTPM_TEST_IBMTSS2=1
enables the following tests
- test_tpm2_save_load_state_2
- test_tpm2_save_load_state_3
- test_tpm2_libtpms_versions_profiles
SWTPM_TEST_PROFILE
allows to set a profile for the following tests:
- test_tpm2_ibmtss2
Note: The test suite will terminate with an error if the profile disables an algorithm that it requires.
To run against an installed IBM TSS test suite, you may set the
SWTPM_TEST_IBMTSS
to the location of the test suite, such as
/usr/libexec/installed-tests/ibmtss
.
Some tests require root rights, especially those involving the CUSE TPM and the vTPM proxy device. To run these and all the other ones you can use the following command line:
sudo bash -c "SWTPM_TEST_EXPENSIVE=1 SWTPM_TEST_STORE_VOLATILE=1 SWTPM_TEST_IBMTSS2=1 make check"