The temporary egl fb scanout_tex_fb is only needed to facilitate the
blit to the display surface's texture (ssd->ds->texture). Therefore,
destroy it after the blit is submitted. And, also make sure that it
is empty initialized before it is actually used.
Fixes: f851cd65 ("ui/spice: Blit the scanout texture if its memory layout is not linear")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20250718234039.2266704-1-vivek.kasireddy@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Replace -1 comparisons for wint_t with WEOF to fix infinite loop caused by a
65535 == -1 comparison.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2905
Signed-off-by: William Hu <purplearmadillo77@proton.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ Marc-André - Add missing similar code change, remove a comment ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <tSO5to8--iex6QMThG3Z8ElfnNOUahK_yitw2G2tEVRPoMKV936CBdrpyfbeNpVEpziKqeQ1ShBwPOoDkofgApM8YWwnPKJR_JrPDThV8Bc=@proton.me>
This lets us see the full flow of RFB messages received from the
client.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When a VNC client sends a "set pixel format" message, the
'client_endian' field will get initialized, however, it is
valid to omit this message if the client wants to use the
server's native pixel format. In the latter scenario nothing
is initializing the 'client_endian' field, so it remains set
to 0, matching neither G_LITTLE_ENDIAN nor G_BIG_ENDIAN. This
then results in pixel format conversion routines taking the
wrong code paths.
This problem existed before the 'client_be' flag was changed
into the 'client_endian' value, but the lack of initialization
meant it semantically defaulted to little endian, so only big
endian systems would potentially be exposed to incorrect pixel
translation.
The 'virt-viewer' / 'remote-viewer' apps always send a "set
pixel format" message so aren't exposed to any problems, but
the classical 'vncviewer' app will show the problem easily.
Fixes: 7ed96710e8
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow user to set a preferred scale (defaulting to 1) of the virtual
display. Along with zoom-to-fix=false, this would be helpful for users
running QEMU on hi-dpi host desktop to achieve pixel to pixel display --
e.g., if the scale factor of a user's host desktop is set to 200%, then
they can set a 0.5 scale for the virtual display to avoid magnification
that might cause blurriness.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20250601045245.36778-3-weifeng.liu.z@gmail.com>
When aspect ratio of host window and that of guest display are not
aligned, we can either zoom the guest content to fill the whole host
window or add padding to respect aspect ratio of the guest. Add an
option keep-aspect-ratio to allow users to select their preferred
behavior in this case.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Suggested-by: Kim, Dongwon <dongwon.kim@intel.com>
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20250601045245.36778-2-weifeng.liu.z@gmail.com>
In cases where the scanout buffer is provided as a texture (e.g. Virgl)
we need to check to see if it has a linear memory layout or not. If
it doesn't have a linear layout, then blitting it onto the texture
associated with the display surface (which already has a linear layout)
seems to ensure that there is no corruption seen regardless of which
encoder or decoder is used.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Frediano Ziglio <freddy77@gmail.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Cc: Michael Scherle <michael.scherle@rz.uni-freiburg.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20250617043546.1022779-8-vivek.kasireddy@intel.com>
Since most encoders/decoders (invoked by Spice) may not work properly
with tiled memory associated with a texture, we need to create another
texture that has linear memory layout and use that instead.
Note that, there does not seem to be a direct way to indicate to the
GL implementation that a texture's backing memory needs to be linear.
Instead, we have to do it in a roundabout way where we need to first
create a tiled texture and import that as a memory object to create
a new texture that has a linear memory layout.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Frediano Ziglio <freddy77@gmail.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Co-developed-by: Michael Scherle <michael.scherle@rz.uni-freiburg.de>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20250617043546.1022779-7-vivek.kasireddy@intel.com>
There are cases where we do not want the memory layout of a texture to
be tiled as the component processing the texture would not know how to
de-tile either via software or hardware. Therefore, ensuring that the
memory backing the texture has a linear layout is absolutely necessary
in these situations.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Frediano Ziglio <freddy77@gmail.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Co-developed-by: Michael Scherle <michael.scherle@rz.uni-freiburg.de>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20250617043546.1022779-6-vivek.kasireddy@intel.com>
In the specific case where the display layer (virtio-gpu) is using
dmabuf, and if remote clients are enabled (-spice gl=on,port=xxxx),
it makes sense to limit the maximum (streaming) rate (refresh rate)
to a fixed value using the GUI refresh timer. Otherwise, the updates
or gl_draw requests would be sent as soon as the Guest submits a new
frame which is not optimal as it would lead to increased network
traffic and wastage of GPU cycles if the frames get dropped.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Frediano Ziglio <freddy77@gmail.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Cc: Michael Scherle <michael.scherle@rz.uni-freiburg.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20250617043546.1022779-5-vivek.kasireddy@intel.com>
Giving users an option to choose a particular codec will enable
them to make an appropriate decision based on their hardware and
use-case. Note that, the Spice server would use this codec with
Gstreamer encoder and only when gl=on is specified.
If no codec is provided, then the codec gstreamer:h264 would be used
as default. And, for the case where gl=off, the default codec to be
used is determined by the Spice server.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Frediano Ziglio <freddy77@gmail.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Cc: Michael Scherle <michael.scherle@rz.uni-freiburg.de>
Cc: Daniel P. Berrangé <berrange@redhat.com>
[ Marc-Andre - fix unused variables warnings ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20250617043546.1022779-4-vivek.kasireddy@intel.com>
Newer versions of Spice server should be able to accept dmabuf
fds from Qemu for clients that are connected via the network.
In other words, when this option is enabled, Qemu would share
a dmabuf fd with Spice which would encode and send the data
associated with the fd to a client that could be located on
a different machine.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Frediano Ziglio <freddy77@gmail.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Cc: Michael Scherle <michael.scherle@rz.uni-freiburg.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20250617043546.1022779-3-vivek.kasireddy@intel.com>
While trying to export and obtain fds associated with a texture, it
is possible that the fds returned after eglExportDMABUFImageMESA()
call have error values. Therefore, we need to evaluate the value of
all fds and return false if any of them are negative.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Frediano Ziglio <freddy77@gmail.com>
Cc: Dongwon Kim <dongwon.kim@intel.com>
Cc: Michael Scherle <michael.scherle@rz.uni-freiburg.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20250617043546.1022779-2-vivek.kasireddy@intel.com>
The worker thread copies data in VncState to avoid race, but some
data are too big to copy. Such data are held with pointers to avoid
the overhead to copy, but it requires tedious memory management and
makes them vulnerable to race.
Introduce the VncWorker type to contain all data shared without copying.
It allows allocating and freeing all shared data at once and shows that
the race with the worker thread needs to be taken care of when
accessing them.
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20250603-zlib-v3-2-20b857bd8d05@rsg.ci.i.u-tokyo.ac.jp>
vnc_worker_thread_loop() copies z_stream stored in its local VncState to
the persistent VncState, and the copied one is freed with deflateEnd()
later. However, deflateEnd() refuses to operate with a copied z_stream
and returns Z_STREAM_ERROR, leaking the allocated memory.
Avoid copying the zlib state to fix the memory leak.
Fixes: bd023f953e ("vnc: threaded VNC server")
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250603-zlib-v3-1-20b857bd8d05@rsg.ci.i.u-tokyo.ac.jp>
If a virtual machine is paused for an extended period time, for example,
due to an incoming migration, there are also no changes on the screen.
VNC in such case increases the display update interval by
VNC_REFRESH_INTERVAL_INC (50 ms). The update interval can then grow up
to VNC_REFRESH_INTERVAL_MAX (3000 ms).
When the machine resumes, it can then take up to 3 seconds for the first
display update. Furthermore, the update interval is then halved with
each display update with changes on the screen. If there are moving
elements on the screen, such as a video, this can be perceived as
freezing and stuttering for few seconds before the movement is smooth
again.
This patch resolves this issue, by adding a listener to VM state changes
and changing the update interval when the VM state changes to RUNNING.
The update_displaychangelistener() function updates the internal timer,
and the display is refreshed immediately if the timer is expired.
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20250521151616.3951178-1-jmarcin@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Scaling was not respected when rendering frames in gtk-egl.c (used if
gl=on and X11 mode). To fix this, add fields x and y to struct egl_fb
for x offset and y offset so we can add padding to window.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-10-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In fixed-scale mode (zoom-to-fit=false), we expect that scale should not
change, meaning that if window size is larger than guest surface,
padding is supposed to be added to preserve the scale. However, in
OpenGL mode (gl=on), guest surface is always painted to the whole canvas
without any padding. This change tries to fix this bug by adding
appropriate padding when drawing surfaces.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-9-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The ui width and height sent to guest is supposed to be in buffer
coordinate. Hence conversion is required.
If scaling (global window scale and zooming scale) is not respected in
non-free-scale mode, window size could keep changing because of the
existence of the iteration of the following steps:
1. In resize event or configure event, a size larger (or smaller) than
the currently used one might be calculated due to not considering
scaling.
2. On reception of the display size change event in guest, the guest
might decide to do a mode setting and use the larger (or smaller)
mode.
3. When the new guest scan-out command arrives, QEMU would request the
window size to change to fit the new buffer size. This will trigger a
resize event or a configure event, making us go back to step 1.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-8-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Scale shouldn't be changed until user explicitly requests it in fixed
scale mode (full-screen=false and free-scale=false). Use function
gd_update_scale to complete scale updating instead.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-7-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When using sdl display backend, if the window is scaled, incorrect mouse
positions will be reported since scaling is not properly handled. Fix it
by transforming the positions from window coordinate to guest buffer
coordinate.
Signed-off-by: Weifeng Liu <weifeng.liu@intel.com>
Message-ID: <20250511073337.876650-6-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When gl=on, scale_x and scale_y were set to 1 on startup that didn't
reflect the real situation of the scan-out in free scale mode, resulting
in incorrect cursor coordinates to be sent when moving the mouse
pointer. Simply updating the scales before rendering the image fixes
this issue.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-5-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The code snippet updating scale_x/scale_y is general and will be used in
next patch. Make it a function.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-4-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now that we've documented definitions and presentation of various
coordinates, let's enforce the rules.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-3-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The existence of multiple scaling factors forces us to deal with various
coordinate systems and this would be confusing. It would be beneficial
to define the concepts clearly and use consistent representation for
variables in different coordinates.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-2-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This allows common code reuse during migration.
Note that resetting the serial is now done regardless if the clipboard
peer was registered or not. This should still be correct.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
During post-load of migration, virtio will notify of fe_open state.
However vdagent code will handle this as a reconnection. This will
trigger a connection reset/caps with the agent.
Check if the state actually changed before resetting the connection.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Buffer is slightly more advanced than GByteArray, since it has a
cursor/position. But vdagent code doesn't need it. This simplify a bit
the code, and migration state.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When VM is paused, we shouldn't notify of clipboard changes, similar to
how input are being treated.
On unsuspend, notify of the current state.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a VMStateDescriptor for QemuClipboardInfo.
Each clipboard owner will have to save its QemuClipboardInfo and
reregister its owned clipboard after loading. (the global cbinfo has
only pointers to owners, so it can't restore the relation with its owner
if it was to handle migration)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When sending a tight rectangle with the palette filter, if the client
format was 8/16bpp, the colours on big endian hosts are not set as
we're sending the wrong bytes. We must first cast the 32-bit colour
to a 16/8-bit value, and then send the result.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The set_pixel_conversion() method is responsible for determining whether
the VNC client pixel format matches the server format, and thus whether
we can use the fast path "copy" impl for sending pixels, or must use
the generic impl with bit swizzling.
The VNC server format is set at build time to VNC_SERVER_FB_FORMAT,
which corresponds to PIXMAN_x8r8g8b8.
The qemu_pixman_get_format() method is then responsible for converting
the VNC pixel format into a pixman format.
The VNC client pixel shifts are relative to the associated endianness.
The pixman formats are always relative to the host native endianness.
The qemu_pixman_get_format() method does not take into account the
VNC client endianness, and is thus returning a pixman format that is
only valid with the host endianness matches that of the VNC client.
This has been broken since pixman was introduced to the VNC server:
commit 9f64916da2
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed Oct 10 13:29:43 2012 +0200
pixman/vnc: use pixman images in vnc.
The flaw can be demonstrated using the Tigervnc client by using
vncviewer -AutoSelect=0 -PreferredEncoding=raw server:display
connecting from a LE client to a QEMU on a BE server, or the
reverse.
The bug was masked, however, because almost all VNC clients will
advertize support for the "tight" encoding and the QEMU VNC server
will prefer "tight" if advertized.
The tight_pack24 method is responsible for taking a set of pixels
which have already been converted into client endianness and then
repacking them into the TPIXEL format which the RFB spec defines
as
"TPIXEL is only 3 bytes long, where the first byte is the
red component, the second byte is the green component,
and the third byte is the blue component of the pixel
color value"
IOW, the TPIXEL format is fixed on the wire, regardless of what
the VNC client declare as its endianness.
Since the VNC pixel encoding code was failing to honour the endian
flag of the client, the tight_pack24 method was always operating
on data in native endianness. Its impl cancelled out the VNC pixel
encoding bug.
With the VNC pixel encoding code now fixed, the tight_pack24 method
needs to take into account that it is operating on data in client
endianness, not native endianness. It thus may need to invert the
pixel shifts.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It will make it easier to do certain comparisons in future if we
store G_BIG_ENDIAN/G_LITTLE_ENDIAN directly, instead of a boolean
flag, as we can then compare directly to the G_BYTE_ORDER constant.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All dependencies that are in common_ss (which includes system_ss) automatically
have their include path added when building the target-specific files. So the
hack in ui/meson.build is not needed anymore since commit 727bb5b477 ("meson:
pick libfdt from common_ss when building target-specific files", 2024-05-10);
drop it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need spice version >= 0.15.3 which has spice_qxl_gl_scanout2
API for multi plane scanout support.
v2:
* use new dmabuf API and check length
* check spice_qxl_gl_scanout2 present instead of
bump spice version dependency
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ Fix style ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20250327025848.46962-7-yuq825@gmail.com>
mesa/radeonsi is going to support explicit modifier which
may export a multi-plane texture. For example, texture with
DCC enabled (a compressed format) has two planes, one with
compressed data, the other with meta data for compression.
v2:
* change API qemu_dmabuf_get_fd/offset/stride to
qemu_dmabuf_get_fds/offsets/strides.
* change API qemu_dmabuf_dup_fd to qemu_dmabuf_dup_fds.
* add an extra arg to these API for the length of the
array.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
[ Fix style ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20250327025848.46962-2-yuq825@gmail.com>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
A few functions now end with a label. The next commit will clean them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-3-armbru@redhat.com>
[Straightforward conflict with commit 988ad4cceb (hw/loongarch/virt:
Fix cpuslot::cpu set at last in virt_cpu_plug()) resolved]
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch implements DCH (delete character) and ICH (insert
character) commands.
DCH - Delete Character:
"As characters are deleted, the remaining characters between the
cursor and right margin move to the left. Character attributes move
with the characters. The terminal adds blank spaces with no visual
character attributes at the right margin. DCH has no effect outside
the scrolling margins" [1].
ICH - Insert Character:
"The ICH sequence inserts Pn blank characters with the normal
character attribute. The cursor remains at the beginning of the
blank characters. Text between the cursor and right margin moves to
the right. Characters scrolled past the right margin are lost. ICH
has no effect outside the scrolling margins" [2].
Without these commands console is barely usable.
[1] https://vt100.net/docs/vt510-rm/DCH.html
[1] https://vt100.net/docs/vt510-rm/ICH.html
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20250226075913.353676-6-r.peniaev@gmail.com>
