This reverts commit 3940f48c47 as it's
bogus and was already fixed on master, so that's why testing this
change made it look like it was working now compared to the previous
version.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
when editing a local sync job, the field would be empty because of
this and not be set to the previously configured remote-store.
The binding is already used for the local datastore, not sure why it
should even be applied to the target where it might not even be valid.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Set `supportsWipeDisk` to true to enables the wipe button in the web
UI.
The entry for override_task_descriptions is copied from pve-manager.
Signed-off-by: Markus Frank <m.frank@proxmox.com>
Reviewed-by: Lukas Wagner <l.wagner@proxmox.com>
Tested-by: Lukas Wagner <l.wagner@proxmox.com>
Reviewed-by: Max Carrara <m.carrara@proxmox.com>
Tested-by: Max Carrara <m.carrara@proxmox.com>
and show the relevant actions. They will be forwarded to the controller,
so we can reuse that code without big refactoring them into another
class/place.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
... since the store field was cleared when the window opened.
Reported-by: Lukas Wagner <l.wagner@proxmox.com>
Fixes: 9039d6709e
Signed-off-by: Hannes Laimer <h.laimer@proxmox.com>
Tested-by: Lukas Wagner <l.wagner@proxmox.com>
previously, the snapshot grid returned one of three possible types of
values:
* a list of snapshots
* a list of datastores (if only whole datastores were selected)
* the string 'all' (when all snapshots were selected)
this led to some confusing and wrong code, especially the part:
```
if (source === 'all') {
source = values.store;
}
```
which basically set the selected *target* store as a source. (meaning
it tried restoring a datastore with the selected target name,
regardless if it existed or not)
This fell through in testing, since we most often only restored to the
same datastore anyway were the target and source name were the same.
Rework the return value to return the empty array in case all
snapshots are selected, since selecting none is not a valid anyway.
This means we always get an array back, which makes the code a bit
cleaner overall.
At the same time, we now differentiate correctly the 'all selected'
case, by setting the selected target as a default target.
So instead of previously having `target=target` as datastore
parameter, we now have `target` which is the correct behavior when we
want to restore the whole media set anyway.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Mira Limbeck <m.limbeck@proxmox.com>
some of the variable names did not really tell the full story, so
extend them a bit. This makes the intention much clearer.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Mira Limbeck <m.limbeck@proxmox.com>
by counting the returned tapes and compare it to the sequence number.
If the tape count is lower than the highest sequence number plus one,
there must be a tape missing.
Mark it in the text and add the proxmox-warning-row class.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
With this patch it is possible to remove systemd mount units via the webui.
Signed-off-by: Markus Frank <m.frank@proxmox.com>
Reviewed-by: Lukas Wagner <l.wagner@proxmox.com>
Tested-by: Lukas Wagner <l.wagner@proxmox.com>
When there is no comment for a backup group, the comment of the last
(most recent) snapshot in this group will be shown as dimmed text, as
long as the back group is collapsed.
Signed-off-by: Philipp Hufnagl <p.hufnagl@proxmox.com>
the ui shows the default 'root' namespace as target, but this only
worked when no namespace was selected. as soon as one source datastore
had a target namespace selected, the others datastores would be
skipped as there was no namespace mapping for them. To fix that, we
simply send a default namespace mapping for each source datastore
without a target (no target means 'root')
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Mira Limbeck <m.limbeck@proxmox.com>
the reset button only makes sense for editing existing entries,
not for creating new.
This brings it inline with the ZFS create window from PVE.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by adding the 'totp-locked' column to the model
a diff store can only know if a column has changed if the column is
defined in the model, otherwise it'll only load it the first time
(when the 'load' called on the diff store)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
but fallback to 'eslint' otherwise
Suggested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[T: move into www/manager Makefile directly]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We recently took into account the selected datastore when restoring
from tape, but the snapshot grids value may not only be a single
datastore, it can also be a list of snapshots, datastores or 'all'.
Handle these cases and extract the source datastore correctly.
This fixes tape restoration when not a whole datastore is selected.
Reported in the forum:
https://forum.proxmox.com/threads/restore-from-lto-parameter-verification-errors-store.128445
Fixes: df881ed0 ("ui: tape: fix restoring a single datastore")
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the user selected a single datastore to restore from tape on a
media-set that includes more than one, the ui suggests (and is
intended to) that only that datastore will be restored on the selected
target.
The logic to construct the store mapping parameter did not consider that
case, and simply gave the target as default store, which meant all
datastores were restored onto the target.
To fix that, we have to get the source datastore from the field, and
construct the correct parameter ("source=target").
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
ExtJS has a `listeners` but no `listener` config, so add the missing
`s` to ensure the upload window destroy event callback is triggered.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
when labeling a tape in a changer, we pre-fill the label field with
the one from the barcode (if it exists). Letting the user change
the label here does not make much sense, since we assume that they are
the same (e.g. for move operations etc.)
So instead simply display the label to protect users from accidentally
changing it. If a user really needs to have a different label than the
suggested one, it's still possible on the cli.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
avoid accessing private members directly but rather try to use the
public API, this then allows us do drop declaring a reference on the
realm combobox, which was not directly used and thus a bit subtle.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
For the `Datastore -> Summary` overview for all configured datastores.
Fix is adapted from the PVE's ceph's status details or performance
runningCharts, which are both similar (but not really the same)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ T: expand commit message to note that this is adapted from PVE ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
removes the style that gets added directly to the element of the
package versions and system report views. this makes them harder to
style through css as normal selectors cannot override the element's
style. since they behave properly without these styles anyway, remove
them.
Signed-off-by: Stefan Sterz <s.sterz@proxmox.com>
adds a theme switcher to the ui and handles the necessary cookies in
the backend.
this requires a bump of the widget toolkit so the necessary widgets
are present.
Signed-off-by: Stefan Sterz <s.sterz@proxmox.com>
This allows specifying a user's realm when adding a new user.
For now, adding users to the PAM realm is explicitely disabled
Signed-off-by: Lukas Wagner <l.wagner@proxmox.com>
we use 'enable' property here with a default of true, so change
the dataIndex and the renderer to reflect that
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The `onSetValues` (pedant to `onGetValues`) got added relatively
recently to widget toolkits input panel. Using it avoids the need to
hard-code some "dynamic override" calling semantics.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Add a simple edit window with 2 combo boxes for `sync-level` and
`chunk-order`.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ T: rework commit message/subject a bit ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we can still do that as notifications for prune jobs weren't released
yet.
We may want to evaluate if we adapt (some) other notification types
too on next major release.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
is left in the datastore. Before, the GUI would report "Never" for the
estimated time full, because the value provided in the backend was in
the past. To get around this, the GUI now reports "Full" if the value
for available reaches 0.
Signed-off-by: Daniel Tschlatscher <d.tschlatscher@proxmox.com>
The API now exposes the field 'available' as well, with which the
unprivileged total is calculated in all corresponsing views in the
frontend.
The rrd charts now also display the total as the unprivileged total
if available, otherwise the absolute total is used.
Signed-off-by: Daniel Tschlatscher <d.tschlatscher@proxmox.com>
The backend doesn't have an 'enable' option, but 'disable'. Convert
it to avoid a negative value that is checked "enabled".
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
namely 'catalog' and 'read-all-labels', by always opening a
window (with a drive now autoselected) and the two checkboxes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The `ACME` panel may be rendered out of sight (overflow) when there
are enough SANs on the upper `Certificates` panel to push it down
enough and the browser/display height is too small.
Enable the `scrollable` config for the parent certificate view panel
in the y-axis (vertical) to make ExtJS automatically add a scrollbar
if the content overflows. Avoid enabling it for the x-axis too as
that breaks reflow of the layout if the browser window gets resized.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[T: fix commit message to one from manager ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we converted the prune settings of datastores to prune-jobs, but did
not actually implement the notifications for them, even though
we had the notification options in the gui (they did not work).
implement the basic ok/error notification for prune jobs
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
While finishing up my previous patch series I stumbled upon this file
which is not referenced anywhere in the proxmox-backup repository nor
in any of the other repositories as far as I can tell (except in the
Makefile).
I searched far and wide for any occurences and tested the backup
explorer GUI without it, which still seems to work normally.
Introduced in: 98425309b0
References removed in: 3e395378bc
Therefore I think this can be safely considered dead code and be
removed. It shall remain in the pve-devel archives forevermore anyway.
Signed-off-by: Daniel Tschlatscher <d.tschlatscher@proxmox.com>
when we set a default language server side, we want to display that on
the login page. For that we have to use the 'language' variable in the
index template.
Also set the fallback to '__default__' instead of 'en' so that we show
'Default (English)'.
Was reported in the forum:
https://forum.proxmox.com/threads/set-default-language-on-server-login-screen-to-german.114431/
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
simple CRUD interface to show/add/edit/delete metric servers
it's a bit different from PVE's so it's harder to reuse that than to
copy it. If we need it again, we can still refactor and combine them.
introduce 'PBS.Schema' class to hold the server type/xtype mappings
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
which allows us also to drop the initial manual load in the init,
which would also trigger if the tab isn't visible.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
setting scrollable on the parent tab panel makes not much sense and
will always add a scroll bar that can scroll a few pixels, even if
there's enough space.
Rather set it to true (= auto) in the actual panels that hold the
content.
Also set a bottom margin so that users can see the "end" of the panel
at the bottom, otherwise it looked like it had a start and sides, but
no bottom.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
input panel collect all form fields below them, so nesting two
input panels needs a bit of special care to avoid that each of the
panels adds the data of the deeper nested ones, resulting in
duplicate parameters that the backend then chokes one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the intra-panel margin is still the same (10 + 0 == 7 + 3) but one
can now see the bottom border.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Fix missing load on initial view, re-use the prune input panel for
editing and avoid using a tab panel for a single tab, rework also
some columns widths and various other small parts-
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we already handle that manually in the onLoad and want to further
extend that, so drop the more generic monStoreError
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
with namespaces the paths can get pretty complex, so make the path
column take some flex space too, but not too much to avoid making it
look odd for the short paths we have otherwise
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Without namespaces this had not much use, but now that we can have
permissions below we should allow so.
For convenience also query the namsepaces here and add them to the
list of available ACL paths, the read-dir shouldn't be that expensive
(albeit, we could cache them in the frontend)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This reverts commit 7a1a5d206d.
We could already cause the behavior by simply setting ignore-verified
to false, aas that flag is basically an on/off switch for even
considering outdated-after or not.
So avoid the extra logic and just make the gui use the previously
existing way.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by filtering out the empty namespace from the api, and putting
manually a div with the grid-empty xclass around the gettext
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ T: reword commit message ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
'defaultStore' can be '' or null, so check for truthyness also, we
want the mapping to be a formField so that the validation triggers
and the restore button gets en/disabled accordingly. We still have to
call 'getValue' manually, because the onGetValues will get it as
string instead of an array
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
else it's a lot of wasted space for the ordinary case, that hasn't
permanent maintenance modes activated, and even if, their admins
should be used to it, so not the best space/usability ROI there
either.
Just use the icon as visual clue and add a tooltip for the
maintenance mode info.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to not having to query the activeTasks everywhere, change the renderer
to omit the check/spinner when no activeTasks are given
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
matches what we do for (most) of such things in PVE since 7.0 there
and also what the disk management gui shows, further disks are sold
with SI units for their advertised capacity, so its more fitting
there too.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
commit bd21a63b only fixed sync, not verify, and we can do better by
using a display-edit field.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we cannot change the id, and even if we send the same, the backend
does not allow 'duplicate' parameters (the id is in the url already)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by checking if *any* record has data, not only the first
this would prevent the chart from being shown for e.g. newly added
datastores, or for datastores after the server was offline for some time
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Not only can we remove a few lines of duplicated code, we also get
the "link to repo management" for free.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
only ask the name of the current NS, not the full NS path to avoid
too long input requirements on deep levels.
needs a few smaller hacks, ideally we would pull out the basic stuff
from Edit window in some EditBase window and let both, SafeDestroy
and Edit window derive from that, for better common, in sync
features.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
it maybe should still simple get dropped and replaced with
(empty)Text 'Root' or 'Root Namespace'
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
never makes sense to clear the value due to remote or remoteStore
change as we weren't enabled then in the first place.
This fixes clearing the currently set namespace on editing an
existing job, which always made it seem like the Root namespace was
selected, even if the originalValue was correct (thus the dirty-form
reset/ok behaviour still worked, making it even more confusing)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to avoid making it "jump" in the users face by immediately opening
the picker on window open.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to avoid that the comobox triggers automatic API request with the
queryParam default `query` GET param on manual typing (e.g., for
filtering) from the user, we have all data already loaded and locally
available.
https://docs.sencha.com/extjs/7.0.0/classic/Ext.form.field.ComboBox.html#cfg-queryMode
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This provides immediate feedback for adding the respective icon in
the navigation tree entry most of the time, and we can then increase
the query period of the datastore list store to the original 15
again, as it was lowered to 5 seconds for just this reason in commit
fbd6f54f39
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we query that store to add the datastore specific ACL paths to
improve UX there, this failed a while due the StoreManager lookup
always failing as the store wasn't registered in the StoreManager due
to using storeid vs. correct storeId
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
add a default namespace selector (of the current default store)
and a namespace selector per target datastore (for media-sets with
multiple datastores).
to achieve that we have to change the way we handle the mapping field a bit:
* don't use it as field directly (otherwise the value gets stringified),
but use the 'getValue' method in 'onGetValues'.
* set the defaultStore there, not only that we have one
(with this we can now easily show it as emptytext for each store)
* add a reference to the widgets to the record so that we can access
them in the respective change handler (also clean those references up,
else we have a cyclic reference between record <-> widget)
in onGetValues, if we have multiple datastores, the mapping grid does
all the work for us, otherwise, we have to create the ns mapping
ourselves there.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since the namespaces are in the snapshot path we get here, we must parse
them out, else we confuse the first namespace with the group.
for now, show all namespaces on the same level (so not nested), and
do not allow for preselecting a namespace for restoring
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for better re-usability in the future and it felt a bit odd to have
such specific logic in the sync job edit directly
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of using 'replaceChild', simply set the appropriate
properties. When using the 'nodeUpdate' (protected function of extjs,
intended to be overwritten) instead of the private 'updateNode', it
will be called when the properties change
This way, the treenode stays the same and it can keep the selection
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
they all still used some odd side effects of the tree structure to
decided what record type they operated on, just move them over to the
new `ty` record.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and transform to reST.
semantic changes to the content are:
* s/{pve}/`Proxmox Backup`_/g
* changing footnotes to parenthesized notes (did not see footnote use in
the current docs)
* removed the comment about systems setup before the introduction of
p-b-t (which was introduced before pbs)
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
this not only makes the action disable/hide checks simpler, but also
prepares the view a bit for the idea of adding a new API endpoint
that returns the whole datastore content tree as structured JSON so
that it can be directly loaded into a tree store.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
that way it's easier to see on which NS one currently operates and
allows better distinguishing of root NS and some sub ns named "Root"
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
reference NS so that users get a hint where they are currently
hierarchy-wise, and clarify that we found no *accessible* snapshots,
on this level, i.e., there can be some that we just cannot see due to
only having access on lover level NS or being different owners.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
since markdown notes might be rather long, this commit adds a tab
similar to pve's datacenter or node notes. requires a bump of the
widget toolkit in order to use the `pmxNotesView`.
Signed-off-by: Stefan Sterz <s.sterz@proxmox.com>
without this the store stayed active in the background and kept
updating every 3s for every datastore the ui was opened.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
changed pmxUserSelector to pbsAuthidSelector, because it is currently
not possible to restore with a api token via gui.
Signed-off-by: Markus Frank <m.frank@proxmox.com>
Allows setting the default language in Configuration/Other/General
Signed-off-by: Matthias Heiserer <m.heiserer@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this is nothing to important and nothing that'll get changed *that*
often, so 2.5s is more than enough.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
`deactivate` is only triggered if we switch to a different tab on
the same navigation level, but if we switch to a completely different
component (e.g., fom `Options -> Others` to `Datastore foo`) we can
only work with the destroy event, use the before one as else we
cannot access the view controllers method anymore.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
verifying a single snapshot is now never skipped because of recent verify
verifying a group will now reverify after 29 days to be consistent
with the 'All OK (old)' display
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
To much wasted space else.
Also rename "Options" to "Others", while it's not _that_ much better
it's slightly more intuitive than config -> options (which has some
redundancy)...
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
also fixup missing emptyText for fingerprint (adapted from PVE's PBS
storage addition) and code-style in surrounding areas a bit
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
When a user directly opened the webui with a fragment that is not
the summary, opening of the 'my settings' window fails because the
initial set of the columns field triggers a state change, which in turn
tries to trigger 'updateColumns'. That fails though, since the columns
were not even rendered yet (because we are on a different tab).
To fix this, simply return when the panel is not rendered yet.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
similar to PVE, copying over the remaining commit message:
Using 00:00 with relying on the implied default is sub optimal as its
a bit of a magic example that new users may not understand as easily.
So spell it out explicitly, even if there'd be a shorter version
possible.
We also had some request for the once-daily every day, and its a
sensible example to have in general, could help getting the
difference between an hour list and a single one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
store.getData() returns an 'Ext.util.Collection' which is a special
class that does more than being an array of records. Namely, it can
have 'observers' which can react on the change of the collection
Here, the 'onWidgetAttach' callback will be called twice on the first
row add and the widgets (and thus stores) are cached by extjs. When
doing a 'setData' of a Collection, it tries to add the store as an
observer, but due to the above caching and multiple calling this fails
since the store is already an observer.
For this reason, we want to actually copy the records (which neither
the store, nor the Collection has a method for...)
This gives us an additional benefit: The different pbsGroupSelectors can
sort independently now, before it was all linked to the original store's
collection.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
if 'me' is already destroyed here, return
if records is 'null' (which can happen on a not successful load),
load an empty list instead
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
'record[widget]' does not contain anything since the widgets are
in the 'widgets' property so delete that
we also have to remove the 'record' entry of the widget so that
the widget does not have a link to the record anymore
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
adds a second tab and adapts the styling to our usual one (border/padding)
adds a change listener to the remote datastore selector to change the
remote + datastore on the group filters
remaining changes are mostly indentation changes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
adds a second tab and adapts the styling to our usual one (border/padding)
adds a change listener to the datastore selector to change it on the
group filters
remaining changes are mostly indentation changes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this contains a grid + button + hidden field which lets the user
add group filters one by one. the first column is the type selector
(type, group, regex) and the second column shows the relevant
input field (groupselector, kvcombobox for type, and textfield for regex)
i had to hack a little to get access to the widgets of the
fieldcontainer, since we cannot simply access the widget of a column
from another column (which we need to show the correct one when changing
the type), also we cannot traverse the widget hirachy in the usual way,
since extjs seems to build it differently for widgetcolumns.
to solve this, i added references of the widgets to the record, and a
reference of the record to the widgets. since this is now a cyclic
reference, i solve that in 'removeFilter' and in 'beforedestroy' of the grid
by removing the references again
also contains a small css style to remove the padding in the rows
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
to select either a group from a datastore
for now it is expected to set the data in the store manually
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
avoid that there's the same icon rendered twice, once clickable and
once as status. Also indicate the protection with a literal text and
by highlighting the single shield with green, if protected.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we forgot to correclty send the network value as we changed from
the radiogroup to a simple text field
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
here's to note that the radio-group was my idea, Dominik just
executed it, nicely that is.
But, the panel looks a bit glitchy layout wise as with that and the
bandwidth fields (maybe we should render their unit inline) the
vertical alignments were all over the place.
So for now make it a simple text field and throw in a tooltip for
good measurement
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
delete on update and avoid sending an empty string in any case, the
backend does not likes that much.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
do not choke on non-numbers but use the (partially new) widget
toolkit helpers to also be able to parse string based sizes with
units and auto-scale them
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
adds a list of traffic control rules (with their current usage)
and let the user add/edit/remove them
the edit window currently has a grid for timeframes to add/remove
with input fields for start/endtime and checkboxes for the days
there are still some improvements possible, like having a seperate
grid for networks (the input field is maybe too small), or
optimizing consecutive days to a range (e.g. mon..wed instead of mon,tue,wed)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
like for manual pulls, but persisted in the sync job config and visible
in the relevant GUI parts.
GUI is read-only for now (and defaults to no filtering on creation), as
this is a rather advanced feature that requires a complex GUI to be
user-friendly (regex-freeform, type-combobox, remote group scanning +
selector with additional freeform input).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
when we trigger the first load before the panel was fully created,
there was no load mask for it (but the snapshots would "pop in" on load)
move the first reload into the 'activate' listener. this will be called
the every time a user opens the content tab of a datastore, so guard
it by a 'firstLoad' bool.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
two things wrong with the old code:
* the sort function wants -1, 0 and 1 as a return value for a<b, a==b and a>b
respectively, not a bool (which a < b returns)
* we have to sort the newest backups first, since the first reason is
'keep-last'. until now, we sorted the oldest backup first, resulting
in the older backups getting the 'keep-last' reason
reported by a user in the forum:
https://forum.proxmox.com/threads/prune-ui-and-prune-schedule-simulator-dont-match.94944/
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
