we use 'enable' property here with a default of true, so change
the dataIndex and the renderer to reflect that
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The `ACME` panel may be rendered out of sight (overflow) when there
are enough SANs on the upper `Certificates` panel to push it down
enough and the browser/display height is too small.
Enable the `scrollable` config for the parent certificate view panel
in the y-axis (vertical) to make ExtJS automatically add a scrollbar
if the content overflows. Avoid enabling it for the x-axis too as
that breaks reflow of the layout if the browser window gets resized.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[T: fix commit message to one from manager ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
simple CRUD interface to show/add/edit/delete metric servers
it's a bit different from PVE's so it's harder to reuse that than to
copy it. If we need it again, we can still refactor and combine them.
introduce 'PBS.Schema' class to hold the server type/xtype mappings
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
which allows us also to drop the initial manual load in the init,
which would also trigger if the tab isn't visible.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Fix missing load on initial view, re-use the prune input panel for
editing and avoid using a tab panel for a single tab, rework also
some columns widths and various other small parts-
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
with namespaces the paths can get pretty complex, so make the path
column take some flex space too, but not too much to avoid making it
look odd for the short paths we have otherwise
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Without namespaces this had not much use, but now that we can have
permissions below we should allow so.
For convenience also query the namsepaces here and add them to the
list of available ACL paths, the read-dir shouldn't be that expensive
(albeit, we could cache them in the frontend)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Allows setting the default language in Configuration/Other/General
Signed-off-by: Matthias Heiserer <m.heiserer@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this is nothing to important and nothing that'll get changed *that*
often, so 2.5s is more than enough.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
`deactivate` is only triggered if we switch to a different tab on
the same navigation level, but if we switch to a completely different
component (e.g., fom `Options -> Others` to `Datastore foo`) we can
only work with the destroy event, use the before one as else we
cannot access the view controllers method anymore.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
also fixup missing emptyText for fingerprint (adapted from PVE's PBS
storage addition) and code-style in surrounding areas a bit
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
do not choke on non-numbers but use the (partially new) widget
toolkit helpers to also be able to parse string based sizes with
units and auto-scale them
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
adds a list of traffic control rules (with their current usage)
and let the user add/edit/remove them
the edit window currently has a grid for timeframes to add/remove
with input fields for start/endtime and checkboxes for the days
there are still some improvements possible, like having a seperate
grid for networks (the input field is maybe too small), or
optimizing consecutive days to a range (e.g. mon..wed instead of mon,tue,wed)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
like for manual pulls, but persisted in the sync job config and visible
in the relevant GUI parts.
GUI is read-only for now (and defaults to no filtering on creation), as
this is a rather advanced feature that requires a complex GUI to be
user-friendly (regex-freeform, type-combobox, remote group scanning +
selector with additional freeform input).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The api2 one passes the whole response (for more flexibility) on
reject, so we need to adapt to that.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
for now only http-proxy lives there, but we will add more options later,
such as
* email from
* default gui language
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
userid parameter needs to be properly encoded when shown on the browser
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
present all relevant information about the TFA token to be removed,
so that a user can make a better decision.
Rework layout to match our commonly used style.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
its rather hacky, but our cbind mixin does not support columns (yet).
if it does sometime in the future, we could use that instead
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we want to use this panel again for a 'global' overview, without
any datastore preselected, so we have to handle that, and
adding a datastore selector in the editwindow
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since just the ACLs defined on the exact datastore path don't give
anywhere near a complete picture of who has access to it.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
instead of hard-coding 'backup@pam'. this allows a bit more flexibility
(e.g., syncing to a datastore that can directly be used as restore
source) without overly complicating things.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Avoid overuse of flex, that is as bad as having all to fixed widths.
In spirit similar to the previous commit for the verify panel, see
that for some rationale.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Avoid overuse of flex, that is as bad as having all to fixed widths.
* Set date-time fields to 150 px as they are fixed width text.
* Duration is maximal 3 units, so it can be made fixed too.
* Schedule is flex with lower and upper limits, this is useful as
it's a field which can be both, quite short (daily) or long
(mon..fri *-10..12-1..7 02:00/30:30)
* Status and comment is flex, this way we always get a filled grid
Move status after last verify date and duration field, increases
information density at the left of the grid - reducing need for eye
movement, also, it groups together the "information about last job"
nicer.
Show job-id by default even if they are auto generated when adding
over the gui, as it can help finding the respective job faster when
getting a mail with an error.
Reported-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
in most generic places. this is accompanied by a change in
RpcEnvironment to purposefully break existing call sites.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
and make 'Datastore' unclickable
since we have all options and information on the relevant datastore panels,
we do not need a datastore config anymore (besides the creation,
which we add here)
this also fixes the sorted insertion and removal of new/old datastores
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
add the datastore as parameter for the store, remove
the datastore selector for the edit windows and give the datastore
to it instead
also remove the autostart from the rstore, since we only want to start
it when we change to the relevant tab
and add icons for all other datastore tabs
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
* add square brackets to ipv6 adresses in BackupRepository if they not
already have some (we save them without in the remote config)
* in get_pull_parameters, we now create a BackupRepository first and use
those values (which does the [] mapping), this also has the advantage
that we have one place less were we hardcode 8007 as port
* in the ui, add square brackets for ipv6 adresses for remotes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
to also have the correct icons for warnings and unknown tasks
the text is here "ERROR: ..." now, so leave the 'Error' out
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Not even hard feeling on 'Datastore' vs. 'Data Store' but consistency
is desired in such names.
Talked shortly with Dominik, which also slightly favored the one
without space - so just go for that one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by adding them as columns for the config view,
and as a seperate tab on the edit window (this is done to not show
too many options at once)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
split them into two files and put them into the respective directory
refactor the DataStoreConfigPanel to controller/view
and the DataStoreEdit window/inputpanel to simply an editwindow
(there is no need to have a seperate inputpanel) which also
prepares the window for edit (by using pmxDisplayEditFields)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the last sync job is too far in the past (or there was none at all
for now) we run it at the next iteration, so we want to show that
we now calculate the next_run by using either the real last endtime
as time or 0
then in the frontend, we check if the next_run is < now and show 'pending'
(we do it this way also for replication on pve)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
shows a nice overview of sync jobs (incl status of last run, estimated
next run, etc.) with options to add/edit/remove and also show the
log of the last run and manually run it now
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
when using a diffstore, we have to add all used columns to the model,
else they will not refresh on a load
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
