As a preparatory work to make the XGene MSI driver probe less of
a sorry hack, make the PCI driver check for the availability of
the MSI parent domain, and defer the probing otherwise.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250708173404.1278635-3-maz@kernel.org
Add LUT entry for MSI/IOMMU in Endpoint mode by calling
imx_pcie_add_lut_by_rid() helper function. Since only one physical function
is supported in the Endpoint mode for now, '0' is passed as the Device ID.
This sets up a single LUT entry required for MSI/IOMMU.
The Endpoint function can operate without LUT configuration if neither
IOMMU nor MSI is used by the platform. This LUT configuration is used for
the EP doorbell feature by allowing the Root Complex to trigger the
doorbell on the Endpoint with the help of the Endpoint MSI controller.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: reworded the comments & commit message and dropped tested-by tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-2-57683fc7fb25@nxp.com
Add helper function imx_pcie_add_lut_by_rid(), which will be used by the
upcoming LUT configuration for MSI/IOMMU in the Endpoint mode. No
functional change.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: reworded commit message and dropped tested-by tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-1-57683fc7fb25@nxp.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmh6uxMTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXsDqB/9EZrNSmMhoctjhBwrEjilRPaBHaD0f
7AGbdvs78sZDC2FMQeeqVeUDgv7nhZoT9B/cjSNkAXF8LdtEXOpiYY0sqG+fO8c9
2DHBLBBGbFg+/SI+2SLzgrg8ixplnEF2HPR3pIgpmvqOKJcBd6+LnlyXs3xuBhc/
XCerEwjHDpC27YQf3ZFvgomH1rw4w0yENZaz/ztpca41GScmbBq6K9c0SAzherBJ
IDcbSUHNkT9LoFdXG9gawwX++XrBsfsKwlfAX6lYuzj+rdY5uxJaqMBg5sIA5Huh
aRLB9gXHQVABTqp73kG76ZtBdmMsd2S1JF0YdRxdsL91MQ1C0n7AW9iK
=0Qh6
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Select use CONFIG_SYSFB only if EFI is enabled (Michael Kelley)
- An assorted set of fixes to remove warnings for missing export.h
header inclusion (Naman Jain)
- An assorted set of fixes for when Linux run as the root partition
for Microsoft Hypervisor (Mukesh Rathor, Nuno Das Neves, Stanislav
Kinsburskii)
- Fix the check for HYPERVISOR_CALLBACK_VECTOR (Naman Jain)
- Fix fcopy tool to handle irregularities with size of ring buffer
(Naman Jain)
- Fix incorrect file path conversion in fcopy tool (Yasumasa Suenaga)
* tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: fcopy: Fix irregularities with size of ring buffer
PCI: hv: Use the correct hypercall for unmasking interrupts on nested
x86/hyperv: Expose hv_map_msi_interrupt()
Drivers: hv: Use nested hypercall for post message and signal event
x86/hyperv: Clean up hv_map/unmap_interrupt() return values
x86/hyperv: Fix usage of cpu_online_mask to get valid cpu
PCI: hv: Don't load the driver for baremetal root partition
net: mana: Fix warnings for missing export.h header inclusion
PCI: hv: Fix warnings for missing export.h header inclusion
clocksource: hyper-v: Fix warnings for missing export.h header inclusion
x86/hyperv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix the check for HYPERVISOR_CALLBACK_VECTOR
tools/hv: fcopy: Fix incorrect file path conversion
Drivers: hv: Select CONFIG_SYSFB only if EFI is enabled
The delay that we are waiting on in brcm_pcie_start_link() is
PCIE_T_RRS_READY_MS, use it.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
[mani: Removed the redundant comment]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250624231923.990361-3-florian.fainelli@broadcom.com
The DT binding has moved the PHY, PERST# properties to Root Port node from
the Host Bridge node. So add support for parsing the new binding. The new
binding uses 'reset-gpios' property for PERST#, hence parse the same
property in the driver instead of the legacy 'perst-gpios'.
To maintain DT backwards compatibility, fallback to the legacy method of
parsing the host bridge node if the properties are not present in the Root
Port node.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: refactored the root port parsing code, fixed a bug & commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250702-perst-v5-2-920b3d1f6ee1@qti.qualcomm.com
For IMX8MM_EP and IMX8MP_EP, add fixed 256-byte BAR 4 and reserved BAR 5
in imx8m_pcie_epc_features.
Fixes: 75c2f26da0 ("PCI: imx6: Add i.MX PCIe EP mode support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[bhelgaas: add details in subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250708091003.2582846-3-hongxing.zhu@nxp.com
Running as nested root on MSHV imposes a different requirement
for the pci-hyperv controller.
In this setup, the interrupt will first come to the L1 (nested) hypervisor,
which will deliver it to the appropriate root CPU. Instead of issuing the
RETARGET hypercall, issue the MAP_DEVICE_INTERRUPT hypercall to L1 to
complete the setup.
Rename hv_arch_irq_unmask() to hv_irq_retarget_interrupt().
Co-developed-by: Jinank Jain <jinankjain@linux.microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/1752261532-7225-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1752261532-7225-4-git-send-email-nunodasneves@linux.microsoft.com>
Move away from the legacy MSI domain setup, switch to use
msi_create_parent_irq_domain().
While doing the conversion, I noticed that hv_compose_msi_msg() is doing
more than it is supposed to (composing message). This function also
allocates and populates struct tran_int_desc, which should be done in
hv_pcie_domain_alloc() instead. It works, but it is not the correct design.
However, I have no hardware to test such change, therefore I leave a TODO
note.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The root partition only uses VMBus when running nested.
When running on baremetal the Hyper-V PCI driver is not needed,
so do not initialize it.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/1751582677-30930-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1751582677-30930-2-git-send-email-nunodasneves@linux.microsoft.com>
Fix below warning in Hyper-V PCI driver that comes when kernel is
compiled with W=1 option. Include export.h in driver files to fix it.
* warning: EXPORT_SYMBOL() is used, but #include <linux/export.h>
is missing
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250611100459.92900-6-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250611100459.92900-6-namjain@linux.microsoft.com>
Rockchip controllers can support up to 5.0 GT/s link speed. But the driver
doesn't set the Target Link Speed currently. This may cause failure in
retraining the link to 5.0 GT/s if supported by the endpoint. So set the
Target Link Speed to 5.0 GT/s in the Link Control and Status Register 2.
Fixes: e77f847df5 ("PCI: rockchip: Add Rockchip PCIe controller support")
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
[mani: fixed whitespace warning, commit message rewording, added fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/0afa6bc47b7f50e2e81b0b47d51c66feb0fb565f.1751322015.git.geraldogabriel@gmail.com
Current code uses custom-defined register offsets and bitfields for the
standard PCIe registers. This creates duplication as the PCI header already
defines them. So, switch to using the standard PCIe definitions and drop
the custom ones.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: include bitfield.h]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/e81700ef4b49f584bc8834bfb07b6d8995fc1f42.1751322015.git.geraldogabriel@gmail.com
Rename gen_pci_init() API as pci_host_common_ecam_create() and export it to
allow the PCIe controller drivers to create and configure the ECAM region.
Note that this API should only used by the drivers managing the drvdata on
their own. Rest should continue using pci_host_common_init() API.
Signed-off-by: Mayank Rana <mayank.rana@oss.qualcomm.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250616224259.3549811-3-mayank.rana@oss.qualcomm.com
Export dw_pcie_msi_host_init(), dw_pcie_msi_init(), and dw_pcie_free_msi()
APIs to allow them to be reused by the upcoming DWC based ECAM driver
implementation. Also, move MSI IRQ related initialization code to
dw_pcie_msi_init(), as this code must be executed before dw_pcie_msi_init()
API can be used with ECAM driver.
Signed-off-by: Mayank Rana <mayank.rana@oss.qualcomm.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250616224259.3549811-2-mayank.rana@oss.qualcomm.com
The apple driver relies on being able to directly find the matching root
port structure from the platform device that represents this port.
A previous hack stashed a pointer to the root port structure in the config
window private pointer, but that ended up relying on assumptions that break
other drivers.
Instead, bite the bullet and track the association as part of the driver
itself as a list of probed root ports.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250625111806.4153773-3-maz@kernel.org
Move the LINK_WAIT_SLEEP_MS and LINK_WAIT_MAX_RETRIES macros to pci.h.
Prefix the macros with PCIE_ in order to avoid redefining these for
drivers that already have macros named like this.
No functional changes.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250625102347.1205584-15-cassel@kernel.org
As per PCIe r6.0, sec 6.6.1, a Downstream Port that supports Link speeds
greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link
training completes before sending a Configuration Request.
Add this delay in dw_pcie_wait_for_link(), after the link is reported as
up. The delay will only be performed in the success case where the link
came up.
DWC glue drivers that have a link up IRQ (drivers that set
use_linkup_irq = true) do not call dw_pcie_wait_for_link(), instead they
perform this delay in their threaded link up IRQ handler.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250625102347.1205584-14-cassel@kernel.org
Per PCIe r6.0, sec 6.6.1, software must generally wait a minimum of
100ms (PCIE_RESET_CONFIG_WAIT_MS) after Link training completes before
sending a Configuration Request.
Prior to 36971d6c5a ("PCI: qcom: Don't wait for link if we can detect
Link Up"), qcom used dw_pcie_wait_for_link(), which waited between 0
and 90ms after the link came up before we enumerate the bus, and this
was apparently enough for most devices.
After 36971d6c5a, qcom_pcie_global_irq_thread() started enumeration
immediately when handling the link-up IRQ, and devices (e.g., Laszlo
Fiat's PLEXTOR PX-256M8PeGN NVMe SSD) may not be ready to handle config
requests yet.
Delay PCIE_RESET_CONFIG_WAIT_MS after the link-up IRQ before starting
enumeration.
Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250625102347.1205584-13-cassel@kernel.org
Per PCIe r6.0, sec 6.6.1, software must generally wait a minimum of
100ms (PCIE_RESET_CONFIG_WAIT_MS) after Link training completes before
sending a Configuration Request.
Prior to ec9fd499b9 ("PCI: dw-rockchip: Don't wait for link since
we can detect Link Up"), dw-rockchip used dw_pcie_wait_for_link(),
which waited between 0 and 90ms after the link came up before we
enumerate the bus, and this was apparently enough for most devices.
After ec9fd499b9, rockchip_pcie_rc_sys_irq_thread() started
enumeration immediately when handling the link-up IRQ, and devices
(e.g., Laszlo Fiat's PLEXTOR PX-256M8PeGN NVMe SSD) may not be ready
to handle config requests yet.
Delay PCIE_RESET_CONFIG_WAIT_MS after the link-up IRQ before starting
enumeration.
Fixes: 0e898eb8df ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Cc: Laszlo Fiat <laszlo.fiat@proton.me>
Link: https://patch.msgid.link/20250625102347.1205584-12-cassel@kernel.org
Macro PCIE_RESET_CONFIG_DEVICE_WAIT_MS was added to pci.h in commit
d5ceb9496c ("PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time
value").
Later, in commit 70a7bfb1e5 ("PCI: rockchip-host: Wait 100ms after reset
before starting configuration"), PCIE_T_RRS_READY_MS was added to pci.h.
These macros are duplicates, and represent the exact same delay in the
PCIe specification.
Since the comment above PCIE_RESET_CONFIG_WAIT_MS is strictly more correct
than the comment above PCIE_T_RRS_READY_MS, change rockchip-host to use
PCIE_RESET_CONFIG_WAIT_MS, and remove PCIE_T_RRS_READY_MS, as
rockchip-host is the only user of this macro.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250625102347.1205584-11-cassel@kernel.org
By default, the driver relies on the default hardware defined value for the
Max Link Width (MLW) capability. But if the "num-lanes" DT property is
present, assume that the chip's default capability information is incorrect
or undesired, and use the specified value instead.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[mani: reworded the description and comments]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250530224035.41886-3-james.quinlan@broadcom.com
RK3588 TRM, section "11.6.1.3.3 Hot Reset and Link-Down Reset" states that:
If you want to delay link re-establishment (after reset) so that you can
reprogram some registers through DBI, you must set app_ltssm_enable =0
immediately after core_rst_n as shown in above. This can be achieved by
enable the app_dly2_en, and end-up the delay by assert app_dly2_done.
I.e. setting app_dly2_en will automatically deassert app_ltssm_enable on
a hot reset, and setting app_dly2_done will re-assert app_ltssm_enable,
re-enabling link training.
When receiving a hot reset/link-down IRQ when running in EP mode, we will
call dw_pcie_ep_linkdown(), which may update registers through DBI. Unless
link training is inhibited, these register updates race with the link
training.
To avoid the race, set PCIE_LTSSM_APP_DLY2_EN so the controller never
automatically trains the link after a link-down or hot reset interrupt.
That way any DBI updates done in the dw_pcie_ep_linkdown() path will happen
while the link is still down. Then allow link training by setting
PCIE_LTSSM_APP_DLY2_DONE
Co-developed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250613101908.2182053-2-cassel@kernel.org
The Rockchip driver contains duplicated message routing and INTx code
definitions (e.g., ROCKCHIP_PCIE_MSG_ROUTING_TO_RC,
ROCKCHIP_PCIE_MSG_CODE_ASSERT_INTA). These are already provided by the
PCI core in drivers/pci/pci.h as PCIE_MSG_TYPE_R_RC and
PCIE_MSG_CODE_ASSERT_INTA, respectively.
Remove the driver-specific definitions in favor of the core definitions
instead. This aligns the driver with the PCIe specification and reduces
maintenance overhead.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250607154913.805027-3-18255117159@163.com
The Cadence driver previously defined its own message routing enums (e.g.,
MSG_ROUTING_LOCAL) and message codes, which duplicated existing PCI core
macros (PCIE_MSG_TYPE_R_LOCAL, PCIE_MSG_CODE_ASSERT_INTA, etc.) in
drivers/pci/pci.h. These core definitions align with the PCIe r6.0 spec.
Remove the driver-specific enums and switch to the centralized PCI core
macros. This eliminates redundancy, ensures consistency, and simplifies
future updates. No functional changes are introduced.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250607154913.805027-2-18255117159@163.com
Allow dynamic MSI-X vector allocation for pci_hyperv PCI controller
by adding support for the flag MSI_FLAG_PCI_MSIX_ALLOC_DYN and using
pci_msix_prepare_desc() to prepare the MSI-X descriptors.
Feature support added for both x86 and ARM64
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Clean up the driver by removing unnecessary header includes that are no
longer referenced after the recent refactoring.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20250607160201.807043-4-18255117159@163.com
Correct the debug message for PCIE_CLIENT_INT_NFATAL_ERR from
"no fatal error" to "non fatal error interrupt received" to match the
actual interrupt semantics. This avoids confusion in log interpretation.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20250607160201.807043-3-18255117159@163.com
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
- Create debugfs directory for 'aspm_state_cnt' only when CONFIG_PCIEASPM
is enabled, since there are no other entries (Hans Zhang)
* pci/controller/tegra194:
PCI: tegra194: Create debugfs directory only when CONFIG_PCIEASPM is enabled
- Reorder rockchip_pci_core_rsts because reset_control_bulk_deassert()
deasserts in reverse order, to fix a link training regression (Jensen
Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas Cassel)
* pci/controller/rockchip:
PCI: rockchip-ep: Mark RK3399 as intx_capable
PCI: rockchip: Fix order of rockchip_pci_core_rsts
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
* pci/controller/rcar-gen4:
PCI: rcar-gen4: Document how to obtain platform firmware
PCI: rcar-gen4: set ep BAR4 fixed size
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT lacks
'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32,
and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
* pci/controller/qcom:
PCI: qcom: Add support for IPQ5018
dt-bindings: PCI: qcom: Add IPQ5018 SoC
PCI: dwc: Add support for configuring lane equalization presets
PCI: Add lane equalization register offsets
PCI: dwc: Update pci->num_lanes to maximum supported link width
PCI: of: Add of_pci_get_equalization_presets() API
- Use for_each_of_range() iterator for parsing 'ranges' (Rob Herring)
* pci/controller/mvebu:
PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP (Richard
Zhu)
- Remove redundant dw_pcie_wait_for_link() from imx_pcie_start_link();
since the DWC core does this, imx6 only needs it when retraining for a
faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in some
cases, the controller can't exit 'L23 Ready' through Beacon or PERST#
deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8 GT/s,
causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Save and restore the LUT setting during suspend/resume for i.MX95 SoC
PCI: imx6: Add PLL lock check for i.MX95 SoC
PCI: imx6: Add workaround for errata ERR051586
PCI: imx6: Add workaround for errata ERR051624
PCI: imx6: Toggle the core reset for i.MX95 PCIe
PCI: imx6: Call dw_pcie_wait_for_link() from start_link() callback only when required
PCI: imx6: Skip link up workaround for newer platforms
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training more
robust; this will not affect the intended link width if all lanes are
functional (Wenbin Yao)
* pci/controller/dwc:
PCI: dwc: Make link training more robust by setting PORT_LOGIC_LINK_WIDTH to one lane
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the link
is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root
Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of
rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets
non-sticky registers (Shawn Lin)
- Remove unused PCIE_CLIENT_GENERAL_DEBUG definition (Hans Zhang)
- Organize register and bitfield definitions logically (Hans Zhang)
- Use rockchip_pcie_link_up() to check link up instead of open coding, and
use GENMASK() and FIELD_GET() when possible (Hans Zhang)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up() and
armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin,
meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti
(Hans Zhang)
- Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and
layerscape-gen4, mobiveil (Hans Zhang)
- Simplify j721e link-up check (Hans Zhang)
- Convert pci-host-common to a library so platforms that don't need native
host controller drivers don't need to include these helper functions
(Manivannan Sadhasivam)
* pci/controller/dw-rockchip:
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI: cadence: Simplify J721e link status check
PCI: mobiveil: Return bool from link up check
PCI: dwc: Return bool from link up check
PCI: dw-rockchip: Fix PHY function call sequence in rockchip_pcie_phy_deinit()
PCI: dw-rockchip: Use rockchip_pcie_link_up() to check link up instead of open coding
PCI: dw-rockchip: Reorganize register and bitfield definitions
PCI: dw-rockchip: Remove unused PCIE_CLIENT_GENERAL_DEBUG definition
PCI: dw-rockchip: Move rockchip_pcie_ep_hide_broken_ats_cap_rk3588() to dw_pcie_ep_ops::init()
PCI: dw-rockchip: Enable ASPM L0s capability for both RC and EP modes
PCI: dw-rockchip: Remove PCIE_L0S_ENTRY check from rockchip_pcie_link_up()
# Conflicts:
# drivers/pci/controller/pcie-apple.c
# include/linux/pci-ecam.h
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow (Hans
Zhang)
- Use shared PCIE_MSG_CODE_* definitions and remove duplicate
cdns_pcie_msg_code definitions (Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures in
some configs (Arnd Bergmann)
* pci/controller/cadence:
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
PCI: cadence: Remove duplicate message code definitions
PCI: cadence: Fix runtime atomic count underflow
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying
capabilities (Marc Zyngier)
- Directly set/clear INTx mask bits because T602x dropped the accessors
that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate T602x,
which moves them around; retain default offsets for existing DTs that
lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe because
we're allowed to sleep there (Hector Martin)
- Move register offsets into SoC-specific structure (Hector Martin)
- Add T602x PCIe support (Hector Martin)
* pci/controller/apple:
PCI: apple: Add T602x PCIe support
PCI: apple: Abstract register offsets via a SoC-specific structure
PCI: apple: Use gpiod_set_value_cansleep in probe flow
PCI: apple: Drop poll for CORE_RC_PHYIF_STAT_REFCLK
PCI: apple: Move port PHY registers to their own reg items
PCI: apple: Fix missing OF node reference in apple_pcie_setup_port
PCI: apple: Move away from INTMSK{SET,CLR} for INTx and private interrupts
PCI: apple: Dynamically allocate RID-to_SID bitmap
PCI: apple: Move over to standalone probing
PCI: ecam: Allow cfg->priv to be pre-populated from the root port device
PCI: host-generic: Extract an ECAM bridge creation helper from pci_host_common_probe()
dt-bindings: pci: apple,pcie: Add t6020 compatible string
PCI: apple: Set only available ports up
- For fixed-size BARs, retain both the actual size and the possibly larger
size allocated to accommodate iATU alignment requirements (Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space than
needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint
controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
PCI: dwc: ep: Correct PBA offset in .set_msix() callback
PCI: endpoint: pci-epf-vntb: Simplify ctrl/SPAD space allocation
PCI: endpoint: Retain fixed-size BAR size as well as aligned size
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmg+jmETHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXiWaCACjYSQcCXW2nnZuWUnGMJq8HD5XGBAH
tNYzOyp2Y4bXEJzfmbHv8UpJynGr3IFKybCnhm0uAQZCmiR5k4CfMvjPQXcJu9LK
7yUI/dTGrRGG7f3NClWK2vXg7ATqzRGiPuPDk2lDcP04aQQWaUMDYe5SXIgcqKyZ
cm2OVHapHGbQ7wA+xXGQcUBb6VJ5+BrQUVOqaEQyl4LURvjaQcn7rVDS0SmEi8gq
42+KDVd8uWYos5dT57HIq9UI5og3PeTvAvHsx26eX8JWNqwXLgvxRH83kstK+GWY
uG3sOm5yRbJvErLpJHnyBOlXDFNw2EBeLC1VyhdJXBR8RabgI+H/mrY3
=4bTC
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel)
- Fixes for Hyper-V UIO driver (Long Li)
- Fixes for Hyper-V PCI driver (Michael Kelley)
- Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley)
- Documentation updates for Hyper-V VMBus (Michael Kelley)
- Enhance logging for hv_kvp_daemon (Shradha Gupta)
* tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits)
Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests
Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir
Documentation: hyperv: Update VMBus doc with new features and info
PCI: hv: Remove unnecessary flex array in struct pci_packet
Drivers: hv: Remove hv_alloc/free_* helpers
Drivers: hv: Use kzalloc for panic page allocation
uio_hv_generic: Align ring size to system page
uio_hv_generic: Use correct size for interrupt and monitor pages
Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary
arch/x86: Provide the CPU number in the wakeup AP callback
x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap()
PCI: hv: Get vPCI MSI IRQ domain from DeviceTree
ACPI: irq: Introduce acpi_get_gsi_dispatcher()
Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device()
Drivers: hv: vmbus: Get the IRQ number from DeviceTree
dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties
arm64, x86: hyperv: Report the VTL the system boots in
arm64: hyperv: Initialize the Virtual Trust Level field
Drivers: hv: Provide arch-neutral implementation of get_vtl()
Drivers: hv: Enable VTL mode for arm64
...
The j721e driver has a single platform driver that can be built-in or a
loadable module, but it calls two separate backend drivers depending on
whether it is a host or endpoint.
If the two modes are not the same, we can end up with a situation where the
built-in pci-j721e driver tries to call the modular host or endpoint
driver, which causes a link failure:
ld.lld-21: error: undefined symbol: cdns_pcie_ep_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
ld.lld-21: error: undefined symbol: cdns_pcie_host_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
Rework the dependencies so that the 'select' is done by the common Kconfig
symbol, based on which of the two are enabled. Effectively this means that
having one built-in makes the other either built-in or disabled, but all
configurations will now build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250423162523.2060405-1-arnd@kernel.org
The 'pci-j721e.c' driver is the application/glue/wrapper driver for the
Cadence PCIe Controllers on TI SoCs. Implement support for building it as a
loadable module.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-5-s-vadapalli@ti.com
Introduce the helper function cdns_pcie_ep_disable() which will undo the
configuration performed by cdns_pcie_ep_setup(). Also, export it for use
by the existing callers of cdns_pcie_ep_setup(), thereby allowing them
to cleanup on their exit path.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-4-s-vadapalli@ti.com
Introduce the helper function cdns_pcie_host_disable() which will undo
the configuration performed by cdns_pcie_host_setup(). Also, export it
for use by existing callers of cdns_pcie_host_setup(), thereby allowing
them to cleanup on their exit path.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-3-s-vadapalli@ti.com
Currently, the Cadence PCIe controller driver can be built as a built-in
module only. Since PCIe functionality is not a necessity for booting, add
support to build the Cadence PCIe driver as a loadable module as well.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-2-s-vadapalli@ti.com
This common library will be used as a placeholder for helper functions
shared by the host controller drivers. This avoids placing the host
controller drivers specific helpers in drivers/pci/*.c, to avoid enlarging
the kernel image on platforms that do not use host controller drivers at
all (like x86/ACPI platforms).
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250508-pcie-reset-slot-v4-3-7050093e2b50@linaro.org
The Cadence PCIe controller driver defines message codes in enum
cdns_pcie_msg_code duplicating the existing PCIE_MSG_CODE_* definitions in
drivers/pci/pci.h. The driver only uses ASSERT_INTA and DEASSERT_INTA codes
from this enum.
Remove the redundant Cadence-specific enum definitions and use the ones
available in drivers/pci/pci.h. This helps in avoiding code duplication,
maintaining consistency with the spec, and simplifying the code
maintenance.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250401145023.22948-1-18255117159@163.com
The kdoc for pci_epc_set_msix() says:
"Invoke to set the required number of MSI-X interrupts."
The kdoc for the callback pci_epc_ops->set_msix() says:
"ops to set the requested number of MSI-X interrupts in the MSI-X
capability register"
pci_epc_ops::set_msix() does however expect the parameter 'interrupts' to
be in the encoding as defined by the Table Size field. Nowhere in the
kdoc does it say that the number of interrupts should be in Table Size
encoding.
It is very confusing that the API pci_epc_set_msix() and the callback
function pci_epc_ops::set_msix() both take a parameter named 'interrupts',
but they expect completely different encodings.
Clean up the API and the callback function to have the same semantics,
i.e. the parameter represents the number of interrupts, regardless of the
internal encoding of that value.
Also rename the parameter 'interrupts' to 'nr_irqs', in both the wrapper
function and the callback function, such that the name is unambiguous.
[bhelgaas: more specific subject]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable+noautosel@kernel.org # this is simply a cleanup
Link: https://patch.msgid.link/20250514074313.283156-14-cassel@kernel.org
The kdoc for pci_epc_set_msi() says:
"Invoke to set the required number of MSI interrupts."
The kdoc for the callback pci_epc_ops::set_msi() says:
"ops to set the requested number of MSI interrupts in the MSI capability
register"
pci_epc_ops::set_msi() does however expect the parameter 'interrupts' to be
in the encoding as defined by the Multiple Message Capable (MMC) field of
the MSI capability structure. Nowhere in the kdoc does it say that the
number of interrupts should be in MMC encoding.
It is very confusing that the API pci_epc_set_msi() and the callback
function pci_epc_ops::set_msi() both take a parameter named 'interrupts',
but they expect completely different encodings.
Clean up the API and the callback function to have the same semantics,
i.e. the parameter represents the number of interrupts, regardless of the
internal encoding of that value.
Also rename the parameter 'interrupts' to 'nr_irqs', in both the wrapper
function and the callback function, such that the name is unambiguous.
[bhelgaas: more specific subject]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable+noautosel@kernel.org # this is simply a cleanup
Link: https://patch.msgid.link/20250514074313.283156-13-cassel@kernel.org
The kdoc for pci_epc_get_msix() says:
"Invoke to get the number of MSI-X interrupts allocated by the RC"
The kdoc for the callback pci_epc_ops->get_msix() says:
"ops to get the number of MSI-X interrupts allocated by the RC from the
MSI-X capability register"
pci_epc_ops::get_msix() does however return the number of interrupts in the
encoding as defined by the Table Size field. Nowhere in the kdoc does it
say that the returned number of interrupts is in Table Size encoding.
It is very confusing that the API pci_epc_get_msix() and the callback
function pci_epc_ops::get_msix() don't return the same value.
Clean up the API and the callback function to have the same semantics,
i.e. return the number of interrupts, regardless of the internal encoding
of that value.
[bhelgaas: more specific subject]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable+noautosel@kernel.org # this is simply a cleanup
Link: https://patch.msgid.link/20250514074313.283156-12-cassel@kernel.org
The kdoc for API pci_epc_get_msi() says:
"Invoke to get the number of MSI interrupts allocated by the RC"
The kdoc for the callback pci_epc_ops::get_msi() says:
"ops to get the number of MSI interrupts allocated by the RC from
the MSI capability register"
pci_epc_ops::get_msi() does however return the number of interrupts in the
encoding as defined by the Multiple Message Enable (MME) field of the MSI
Capability structure.
Nowhere in the kdoc does it say that the returned number of interrupts is
in MME encoding. It is very confusing that the API pci_epc_get_msi() and
the callback function pci_epc_ops::get_msi() don't return the same value.
Clean up the API and the callback function to have the same semantics,
i.e. return the number of interrupts, regardless of the internal encoding
of that value.
[bhelgaas: more specific subject]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable+noautosel@kernel.org # this is simply a cleanup
Link: https://patch.msgid.link/20250514074313.283156-11-cassel@kernel.org
While cdns_pcie_ep_set_msix() writes the Table Size field correctly (N-1),
the calculation of the PBA offset is wrong because it calculates space for
(N-1) entries instead of N.
This results in the following QEMU error when using PCI passthrough on a
device which relies on the PCI endpoint subsystem:
failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
Fix the calculation of PBA offset in the MSI-X capability.
[bhelgaas: more specific subject and commit log]
Fixes: 3ef5d16f50 ("PCI: cadence: Add MSI-X support to Endpoint driver")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250514074313.283156-10-cassel@kernel.org
While dw_pcie_ep_set_msix() writes the Table Size field correctly (N-1),
the calculation of the PBA offset is wrong because it calculates space for
(N-1) entries instead of N.
This results in the following QEMU error when using PCI passthrough on a
device which relies on the PCI endpoint subsystem:
failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
Fix the calculation of PBA offset in the MSI-X capability.
[bhelgaas: more specific subject and commit log]
Fixes: 83153d9f36 ("PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250514074313.283156-9-cassel@kernel.org
- Switch the MSI decriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in the
PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper API
function calls. People will never understand that APIs exist for a
reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory extensible
to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to undo
the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain creation
time to avoid redundant (and in case of ARM/GIC-V3-ITS confusing)
invocations on every allocation.
In combination with the new teardown callback this removes some ugly
hacks in the GIC-V3-ITS driver, which pretended to work around the
short comings of the core code so far. With this update the code is
correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI parent
domain creation helper and convert a bunch of (PCI/)MSI drivers over to
the modern MSI parent mechanism. This is the first step to get rid of
at least one incarnation of the three PCI/MSI management schemes.
- The usual small cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=OBMj
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI subsystem (core code and PCI):
- Switch the MSI descriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in
the PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper
API function calls. People will never understand that APIs exist
for a reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory
extensible to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to
undo the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain
creation time to avoid redundant (and in case of ARM/GIC-V3-ITS
confusing) invocations on every allocation.
In combination with the new teardown callback this removes some
ugly hacks in the GIC-V3-ITS driver, which pretended to work around
the short comings of the core code so far. With this update the
code is correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI
parent domain creation helper and convert a bunch of (PCI/)MSI
drivers over to the modern MSI parent mechanism. This is the first
step to get rid of at least one incarnation of the three PCI/MSI
management schemes.
- The usual small cleanups and improvements"
* tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
PCI/MSI: Use bool for MSI enable state tracking
PCI: tegra: Convert to MSI parent infrastructure
PCI: xgene: Convert to MSI parent infrastructure
PCI: apple: Convert to MSI parent infrastructure
irqchip/msi-lib: Honour the MSI_FLAG_NO_AFFINITY flag
irqchip/mvebu: Convert to msi_create_parent_irq_domain() helper
irqchip/gic: Convert to msi_create_parent_irq_domain() helper
genirq/msi: Add helper for creating MSI-parent irq domains
irqchip: Make irq-msi-lib.h globally available
irqchip/gic-v3-its: Use allocation size from the prepare call
genirq/msi: Engage the .msi_teardown() callback on domain removal
genirq/msi: Move prepare() call to per-device allocation
irqchip/gic-v3-its: Implement .msi_teardown() callback
genirq/msi: Add .msi_teardown() callback as the reverse of .msi_prepare()
irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask
dt-bindings: PCI: pci-ep: Add support for iommu-map and msi-map
irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS
irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable()
platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
genirq/msi: Rename msi_[un]lock_descs()
...
struct pci_packet contains a "message" field that is a flex array
of struct pci_message. struct pci_packet is usually followed by a
second struct in a containing struct that is defined locally in
individual functions in pci-hyperv.c. As such, the compiler
flag -Wflex-array-member-not-at-end (introduced in gcc-14) generates
multiple warnings such as:
drivers/pci/controller/pci-hyperv.c:3809:35: warning: structure
containing a flexible array member is not at the end of another
structure [-Wflex-array-member-not-at-end]
The Linux kernel intends to introduce this compiler flag in standard
builds, so the current code is problematic in generating these warnings.
The "message" field is used only to locate the start of the second
struct, and not as an array. Because the second struct can be
addressed directly, the "message" field is not really necessary.
Rather than try to fix its usage to meet the requirements of
-Wflex-array-member-not-at-end, just eliminate the field and
either directly reference the second struct, or use "pkt + 1"
when "pkt" is dynamically allocated.
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250514044440.48924-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250514044440.48924-1-mhklinux@outlook.com>
The hyperv-pci driver uses ACPI for MSI IRQ domain configuration on
arm64. It won't be able to do that in the VTL mode where only DeviceTree
can be used.
Update the hyperv-pci driver to get vPCI MSI IRQ domain in the DeviceTree
case, too.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250428210742.435282-12-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-12-romank@linux.microsoft.com>
In an effort to move ARM64 away from the legacy MSI setup, convert the
Tegra PCIe driver to the MSI-parent infrastructure and let each device have
its own MSI domain.
[ tglx: Moved the struct out of the function call argument ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-10-maz@kernel.org
In an effort to move ARM64 away from the legacy MSI setup, convert the
XGENE PCIe driver to the MSI-parent infrastructure and let each device have
its own MSI domain.
[ tglx: Moved the struct out of the function call argument ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-9-maz@kernel.org
In an effort to move ARM64 away from the legacy MSI setup, convert the
Apple PCIe driver to the MSI-parent infrastructure and let each device have
its own MSI domain.
[ tglx: Moved the struct out of the function call argument ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/all/20250513172819.2216709-8-maz@kernel.org
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix and convert the new instance in
dwc/pcie-amd-mdb.c ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-30-jirislaby@kernel.org
When PTM is enabled, PTM_UPDATING interrupt will be fired for each PTM
context update, which will be once every 10ms in the case of auto context
update. Since the interrupt is not strictly needed for making use of PTM,
mask it to avoid the overhead of processing it.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20250505-pcie-ptm-v4-4-02d26d51400b@linaro.org
Synopsys Designware PCIe IPs support PTM capability as defined in the PCIe
spec r6.0, sec 6.21. The PTM context information is exposed through Vendor
Specific Extended Capability (VSEC) registers on supported controller
implementation.
Hence, add support for exposing these context information to userspace
through the debugfs interface for the DWC controllers (both RC and EP).
Currently, only Qcom controllers are supported. For adding support for
other DWC vendor controllers, dwc_pcie_ptm_vsec_ids[] needs to be extended.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20250505-pcie-ptm-v4-3-02d26d51400b@linaro.org
Upcoming PTM debugfs interface relies on the DWC PCIe mode to expose the
relevant debugfs attributes to userspace. So pass the mode to
dwc_pcie_debugfs_init() API from host and ep drivers and save it in
'struct dw_pcie::mode'.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20250505-pcie-ptm-v4-2-02d26d51400b@linaro.org
Replace explicit if-else condition with direct return statement in
j721e_pcie_link_up(). This reduces code verbosity while maintaining
the same logic for detecting PCIe link completion.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250510160710.392122-4-18255117159@163.com
PCIe link status check is supposed to return a boolean to indicate whether
the link is up or not. So update ls_g4_pcie_link_up() to return bool and
also simplify the LTSSM state check.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250510160710.392122-3-18255117159@163.com
PCIe link status check is supposed to return a boolean to indicate whether
the link is up or not. So, modify the link_up callbacks and
dw_pcie_link_up() function to return bool instead of int.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: commit message reword]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250510160710.392122-2-18255117159@163.com
Previously, the debugfs directory was unconditionally created in
tegra_pcie_config_rp() regardless of the CONFIG_PCIEASPM setting.
This led to unnecessary directory creation when ASPM support was disabled
since only ASPM state count was exposed through debugfs.
Hence, move the debugfs directory creation into init_debugfs() which is
conditionally compiled based on CONFIG_PCIEASPM. This ensures that both
the directory and 'aspm_state_cnt' entry are only created when ASPM is
enabled and avoids cluttering debugfs with empty directories when ASPM is
disabled.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: subject and description change]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/20250407124331.69459-1-18255117159@163.com
As per DWC PCIe registers description 4.30a, section 1.13.43, NUM_OF_LANES
named as PORT_LOGIC_LINK_WIDTH in PCIe DWC driver, is referred to as the
"Predetermined Number of Lanes" in PCIe r6.0, sec 4.2.7.2.1, which explains
the conditions required to enter Polling.Configuration:
Next state is Polling.Configuration after at least 1024 TS1 Ordered Sets
were transmitted, and all Lanes that detected a Receiver during Detect
receive eight consecutive training sequences ...
Otherwise, after a 24 ms timeout the next state is:
Polling.Configuration if,
(i) Any Lane, which detected a Receiver during Detect, received eight
consecutive training sequences ... and a minimum of 1024 TS1 Ordered
Sets are transmitted after receiving one TS1 or TS2 Ordered Set.
And
(ii) At least a predetermined set of Lanes that detected a Receiver
during Detect have detected an exit from Electrical Idle at least
once since entering Polling.Active.
Note: This may prevent one or more bad Receivers or Transmitters
from holding up a valid Link from being configured, and allow for
additional training in Polling.Configuration. The exact set of
predetermined Lanes is implementation specific.
Note: Any Lane that receives eight consecutive TS1 or TS2 Ordered
Sets should have detected an exit from Electrical Idle at least
once since entering Polling.Active.
In a PCIe link supporting multiple lanes, if PORT_LOGIC_LINK_WIDTH is set
to lane width the hardware supports, all lanes that detect a receiver
during the Detect phase must receive eight consecutive training sequences.
Otherwise, LTSSM will not enter Polling.Configuration and link training
will fail.
Therefore, always set PORT_LOGIC_LINK_WIDTH to 1, regardless of the number
of lanes the port actually supports, to make link up more robust. This
setting will not affect the intended link width if all lanes are
functional. Additionally, the link can still be established with at least
one lane if other lanes are faulty.
Co-developed-by: Qiang Yu <quic_qianyu@quicinc.com>
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Signed-off-by: Wenbin Yao <quic_wenbyao@quicinc.com>
[mani: subject change]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[bhelgaas: update PCIe spec citation, format quote]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250422103623.462277-1-quic_wenbyao@quicinc.com
The documentation for the phy_power_off() function explicitly says that it
must be called before phy_exit().
Hence, follow the same rule in rockchip_pcie_phy_deinit().
Fixes: 0e898eb8df ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
[mani: commit message change]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://patch.msgid.link/20250417142138.1377451-1-didi.debian@cknow.org
Some of the callers of rockchip_pcie_link_up() are open coding the
rockchip_pcie_link_up() function, leading to code duplication. So switch
them to use rockchip_pcie_link_up() function.
Also, use the FIELD_GET() macro to simplify the link up check in
rockchip_pcie_link_up().
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250427125316.99627-4-18255117159@163.com
Register definitions were scattered with ambiguous names (e.g.,
PCIE_RDLH_LINK_UP_CHGED in PCIE_CLIENT_INTR_STATUS_MISC) and lacked
hierarchical grouping.
Group registers and their associated bitfields logically. This improves
maintainability and aligns the code with hardware documentation.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250427125316.99627-3-18255117159@163.com
The PCIE_CLIENT_GENERAL_DEBUG register offset is defined but never
used in the driver. It's presence adds noise to the register map.
Remove this unused definition to keep the register list minimal and aligned
with actual hardware usage.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250427125316.99627-2-18255117159@163.com
The look up table (LUT) setting would be lost during the PCIe suspend on
i.MX95 SoC. So to ensure proper functionality after resume, save it during
suspend and restore it while resuming.
Fixes: 9d6b1bd6b3 ("PCI: imx6: Add i.MX8MQ, i.MX8Q and i.MX95 PM support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250416081314.3929794-8-hongxing.zhu@nxp.com
PLL lock is required to ensure that the PLL clock is stable before enabling
the controller in i.MX95 SoC.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250416081314.3929794-7-hongxing.zhu@nxp.com
ERR051586: Compliance with 8GT/s Receiver Impedance ECN.
The default value of GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL] is 1 which
makes receiver non-compliant with the ZRX-DC parameter for 2.5 GT/s when
operating at 8 GT/s or higher. It causes unnecessary timeout in L1.
So the workaround is to set GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL] to 0.
Add this workaround in the dw_pcie_host_ops::post_init() callback for
i.MX95 platforms.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250416081314.3929794-6-hongxing.zhu@nxp.com
ERR051624: The Controller Without Vaux Cannot Exit L23 Ready Through Beacon
or PERST# De-assertion
When the auxiliary power is not available, the controller cannot exit from
L23 Ready with beacon or PERST# de-assertion when main power is not
removed. So the workaround is to set SS_RW_REG_1[SYS_AUX_PWR_DET] to 1.
This workaround is required irrespective of whether Vaux is supplied to the
link partner or not.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250416081314.3929794-5-hongxing.zhu@nxp.com
Add toggling core reset for i.MX95 to align with PHY's power-up sequence.
Note that the register is named as IMX95_PCIE_COLD_RST in hardware, though
it is used to reset the PCIe core.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[mani: subject and description rewording]
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250416081314.3929794-4-hongxing.zhu@nxp.com
Since the DWC driver is already calling dw_pcie_wait_for_link() after
calling the start_link() callback, remove the redundant
dw_pcie_wait_for_link() call from imx_pcie_start_link(). It is still
required to call this function for controllers supporting Gen 2 and higher
link speeds.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250416081314.3929794-3-hongxing.zhu@nxp.com
The current link setup procedure has one workaround to detect the devices
behind PCIe switches on some i.MX6 platforms. But this workaround is not
needed on recent i.MX7 platforms. So skip the workaround for platforms that
do not set the flag and start LTSSM directly.
Also, change the flag name from IMX_PCIE_FLAG_IMX_SPEED_CHANGE to
IMX_PCIE_FLAG_SPEED_CHANGE_WORKAROUND to match the usecase.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250416081314.3929794-2-hongxing.zhu@nxp.com
In the case of PERST# deassert, non-sticky registers will get reset to
their hardware default state and EXT_CAP registers are one among them. But
since the broken ATS cap is hidden only in dw_pcie_ep_ops::pre_init()
callback which is not gettting called during PERST# deassert, it results in
the capability getting advertised again.
So move it to dw_pcie_ep_ops::init() to fix it.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/1744594109-209312-1-git-send-email-shawn.lin@rock-chips.com
L0s capability isn't enabled on all Rockchip SoCs by default, so enable it
in order to make ASPM L0s work on Rockchip platforms.
Testing the L0s for a long time revealed that the default N_FTS value of
210 in the hardware doesn't work stable and causes LTSSM to switch between
L0s and Recovery states. This leads to long exit latency and also causes
link down sometimes. So override the value to the max 255, which seems to
work fine under both PHYs used on Rockchip platforms.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/1744850111-236269-2-git-send-email-shawn.lin@rock-chips.com
