Driver initiated function-reset (FLR) is the highest level of reset
that we can trigger from within the driver. In contrast to PCI FLR it
doesn't require re-enumeration of PCI BAR. It can be useful in case
GT fails to reset. It is also the only way to trigger GSC reset from
the driver and can be used in future addition of GSC support.
v2:
- use regs from xe_regs.h
- move the flag to xe.mmio
- call flr only on root gt
- use BIOS protection check
- copy/paste comments from i915
v3:
- flr code moved to xe_device.c
v4:
- needs_flr_on_fini moved to xe_device
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This workaround is primarily implemented by the BIOS. However if the
BIOS applies the workaround it will reserve a small piece of our DSM
(which should be at the top, right below the WOPCM); we just need to
keep that region reserved so that nothing else attempts to re-use it.
v2 (Gustavo):
- Check for NULL media_gt
- Mask bits [5:0] to avoid potential issues in future platforms
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231102124855.1940491-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Expose power1_max_interval, that is the tau corresponding to PL1, as a
custom hwmon attribute. Some bit manipulation is needed because of the
format of PKG_PWR_LIM_1_TIME in
PACKAGE_RAPL_LIMIT register (1.x * power(2,y))
v2: Get rpm wake ref while accessing power1_max_interval
v3: %s/hwmon/xe_hwmon/
v4:
- As power1_max_interval is rw attr take lock in read function as well
- Refine comment about val to fix point conversion (Andi)
- Update kernel version and date in doc
v5: Fix review comments (Anshuman)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030115618.1382200-4-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The MOCS registers should be written in an MCR-specific manner on Xe_HP
and beyond to prevent any other driver threads or external firmware from
putting the hardware into unicast mode while we initialize the MOCS
table.
Bspec: 66534, 67609, 71185
Cc: Ruthuvikas Ravikumar <ruthuvikas.ravikumar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231023204112.2856331-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add L3SQCREG5 as part of HW recommended settings. The recommended value
in Bspec is 00e0007f. For Xe2-LPG, bits 23:21 don't exist anymore, but
it's confirmed with HW engineers that setting them doesn't do anything.
They still exist on the media GT, Xe2-LPM, but they are already they are
already set as per HW default value. So for Xe2 platform, the only bits
that need to be set are 9:0 since HW's default is 0x1ff and the
recommended value is 0x7f.
Unlike most registers, which have the same relative offset on both
the primary and media GT, this register has a different base offset
on the media GT.
On MTL the register only exists for the primary (graphics) GT, so
there's no need to program it on the media gt. Also, it's part of the
RCS engine's context, so it needs to be added as a LRC workaround.
Bspec: 72161
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231024220739.224251-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add the initial collection of gt/engine/lrc workarounds.
While at it, add some newlines around the platform/IP comments to make
them consistent across all workarounds.
v2:
- FF_MODE is an MCR register (Matt Roper)
- Group 18032247524 with other Xe2 workarounds (Matt Roper)
- Move WA changing PSS_CHICKEN to lrc_was[] as for Xe2 that register
is part of the render context image (Matt Roper)
- Apply WA 16020518922 only on render engine (Matt Roper)
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231024220739.224251-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Extracting the common MI_* instructions that can be used with any engine
to their own header will make it easier as we add additional engine
instructions in upcoming patches.
Also, since the majority of GPU instructions (both MI and non-MI) have
a "length" field in bits 7:0 of the instruction header, a common define
is added for that. Instruction-specific length fields are still defined
for special case instructions that have larger/smaller length fields.
v2:
- Use "instr" instead of "inst" as the short form of "instruction"
everywhere. (Lucas)
- Include xe_reg_defs.h instead of the i915 compat header. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231016163449.1300701-12-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
MI_STORE_DATA_IMM can store either dword values or qword values, and can
store more than one value if the instruction's length field is large
enough. Create explicit defines to specify the number of dwords/qwords
to be stored, which will set the instruction length correctly and, if
necessary, turn on the 'store qword' bit.
While we're here, also replace an open-coded version of
MI_STORE_DATA_IMM with the common macros.
Bspec: 60246
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231016163449.1300701-11-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Keeping the number of registers to be loaded as a separate macro from
the instruction opcode will simplify some upcoming LRC parsing code.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231016163449.1300701-10-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Despite its name, MI_FLUSH_DW instruction can write an immediate value
of either dword size or qword size, depending on the 'length' field of
the instruction. Since "length" excludes the first two dwords of the
instruction, a value of 2 in the length field implies a dword write and
a value of 3 implies a qword write. Even in cases where the flush
instruction's post-sync operation is set to "no write" we're still
expected to size the overall instruction as if we were doing a dword or
qword write (i.e., a length of 1 shouldn't be used on modern platforms).
Rather than baking a size of "1" into the #define and then adding
another unexplained "+ 1" at all the spots where the definition gets
used, lets just create MI_FLUSH_IMM_DW and MI_FLUSH_IMM_QW definitions
that should be OR'd into the instruction header to make it more explicit
what behavior we're requesting.
Bspec: 60229
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231016163449.1300701-9-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe driver currently supports 22-bit addresses for MMIO access.
Future platforms will have additional MMIO extension with
larger address spaces, and to access them, the driver will
have to support wider address representation.
Please note that while the XE_REG macro is used for MMIO access,
XE_REG_EXT macro will be used for MMIO-extension access.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Moti Haimovski <mhaimovski@habana.ai>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Force indirect state sampler data to only be in the dynamic state pool,
which is more convienent for the UMD. Behavior change mirrors similar
change for i915 in commit 16fc9c08f0 ("drm/i915: disable sampler
indirect state in bindless heap")
v2: split out per engine tuning into separate patch, commit message
(Lucas)
v3: rebase
v4: Change to match render only, g.ver 1200 to 1271 (MattR)
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This register don't exist in gfx12+, so here dropping the readout
and print in devcoredump.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It was reading (base) + 0x8c but that is not a valid register
and instead it should read (base) + 0x68.
So here reading the correct register and removing the wrong and
duplicated.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe2 changes or adds bits for mocs in a few BLT instructions:
XY_CTRL_SURF_COPY_BLT, XY_FAST_COLOR_BLT, XY_FAST_COPY_BLT, and MEM_SET.
Modify the code to deal with the new location. Unlike Xe1, the MOCS
field in those instructions is only the MOCS index and not the
Structure_MEMORY_OBJECT_CONTROL_STATE anymore. The pxp bit is now
explicitly documented separately.
Bspec: 57567,57566,57565,57562
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230929213640.3189912-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Set bits 30 and 31 of XY_FAST_COPY_BLT's dword1 for XeHP and above.
Destination or source being Y-Major is selected on dword0 and there's
nothing to set on dword1. According to the bspec for Xe2,
"Behavior is undefined when programmed the value 0". Also for XeHP,
the only value allowed in those bits is 0b11, not being possible to
select "Legacy Tile-Y" anymore, only the newer Tile4.
So, unconditionally set those bits for graphics IP 12.50 and above.
v2: Reword commit message and extend it to graphics version >= 12.50
(Matt Roper)
Bspec: 57567
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230929213640.3189912-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
PVC_MS_* doesn't reflect the real name of the instruction. Rename
it to follow the name used in the bspec.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230929213640.3189912-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Instead of using xe_mocs_index_to_value(), simply define the bitmask
with the shift left applied. This will make it easier to adapt to new
platforms that simply use the index.
This also fixes PVC bug in emit_clear_link_copy() where the MOCS was
getting shifted both by PVC_MS_MOCS_INDEX_MASK definition and by the
xe_moc_index_to_value function.
Bspec: 44509
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230929213640.3189912-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For xe2, besides the previous sizes, the reserved portion of stolen can
also have 16MB and 32MB.
Bspec: 53148
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230929044959.3149265-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Drop UGM per set fragment threshold to 3
BSpec: 54833
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230925160543.915217-1-shekhar.chauhan@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although the vast majority of workarounds the driver needs to implement
are either GT-based or display-based, there are occasionally workarounds
that reside outside those parts of the hardware (i.e., in they target
registers in the sgunit/soc); we can consider these to be "tile"
workarounds since there will be instance of these registers per tile.
The registers in question should only lose their values during a
function-level reset, so they only need to be applied during probe and
resume; the registers will not be affected by GT/engine resets.
Tile workarounds are rare (there's only one, 22010954014, that's
relevant to Xe at the moment) so it's probably not worth updating the
xe_rtp design to handle tile-level workarounds yet, although we may want
to consider that in the future if/when more of these show up on future
platforms.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20230913231411.291933-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are a set of engine group busyness counters provided by HW which are
perfect fit to be exposed via PMU perf events.
BSPEC: 46559, 46560, 46722, 46729, 52071, 71028
events can be listed using:
perf list
xe_0000_03_00.0/any-engine-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/copy-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/interrupts/ [Kernel PMU event]
xe_0000_03_00.0/media-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/render-group-busy-gt0/ [Kernel PMU event]
and can be read using:
perf stat -e "xe_0000_8c_00.0/render-group-busy-gt0/" -I 1000
time counts unit events
1.001139062 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
2.003294678 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
3.005199582 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
4.007076497 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
5.008553068 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
6.010531563 43520 ns xe_0000_8c_00.0/render-group-busy-gt0/
7.012468029 44800 ns xe_0000_8c_00.0/render-group-busy-gt0/
8.013463515 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
9.015300183 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.017233010 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.971934120 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
The pmu base implementation is taken from i915.
v2:
Store last known value when device is awake return that while the GT is
suspended and then update the driver copy when read during awake.
v3:
1. drop init_samples, as storing counters before going to suspend should
be sufficient.
2. ported the "drm/i915/pmu: Make PMU sample array two-dimensional" and
dropped helpers to store and read samples.
3. use xe_device_mem_access_get_if_ongoing to check if device is active
before reading the OA registers.
4. dropped format attr as no longer needed
5. introduce xe_pmu_suspend to call engine_group_busyness_store
6. few other nits.
v4: minor nits.
v5: take forcewake when accessing the OAG registers
v6:
1. drop engine_busyness_sample_type
2. update UAPI documentation
v7:
1. update UAPI documentation
2. drop MEDIA_GT specific change for media busyness counter.
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Co-developed-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Wa_16017236439 requires that we update BCS_SWCTRL
(via indirect context batch buffer) to set 64B
transfers when running on an even-numbered BCS
engine and 256B on an odd-numbered BCS engine.
v2: Move WA from engine_was[] to lrc_was[]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Wa_16017236439 requires the BCS_SWCTRL to be privileged.
v2: Define and use BCS_SWCTRL()
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As with PVC, Xe2 platforms require that the index of an uncached MOCS
entry be programmed into the GUC_SHIM_CONTROL register. This will
likely be needed on future platforms as well.
Xe2 also extends the size of the MOCS index register field from two bits
to four bits. Since these extra bits were unused on PVC, it should be
safe to just increase the size of the mask.
Bspec: 60592
Cc: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On Xe2 platforms, availability of the CCS engines is reflected in the
FUSE4 register.
Bspec: 62483
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe2 uses the same steering control register and steering semaphore
register as MTL. As with recent platforms, group/instance 0,0 is
sufficient to target a non-terminated instance for most classes of MCR
registers; the only types of ranges that need to consider platform
fusing to find a non-terminated instance are SLICE/DSS ranges and a new
SQIDI_PSMI type of range.
Note that the range of valid bits in XE2_NODE_ENABLE_MASK may be reduced
for some Xe2 SKUs. However the lowest bits are always valid and only
the lowest instance is obtained via __ffs(), so there's no need to
complicate the masking with extra platform/subplatform checks.
Also note that Wa_14017387313 suggests skipping MCR lock acquisition
around GAM and GAMWKR registers to prevent MCR register accesses in an
interrupt handler from deadlocking when the steering semaphore is
already held outside the interrupt context. At this time Xe never
issues MCR accesses from within an interrupt handler so the workaround
is not currently needed.
v2:
- [0x008700-0x0087FF] range to extend up to 0x887F (Matt Attwood)
- [0x00EF00-0x00F4FF] -> [0x00F000, 0xFFFF] to follow latest
bspec version (Bala)
Bspec: 71185
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe2 platforms have three DSS fuse registers for both geometry and
compute.
Bspec: 67171, 67537, 67401, 67536
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On MTL (and only on MTL) the GSCCS defaults with idle messaging
disabled. This means that, once awoken, the GSCCS will never signal its
idleness to the GT. To allow the GT to enter the proper low-power state,
we need therefore to turn idle messaging on. As part of this, we also
need to set a proper hysteresis value for the engine.
v2: use MEDIA_VERSION() and CLR() for the RTP rule and action, add reg
bit define in descending order (Matt)
Bspec: 71496
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230817221707.1602873-1-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The ID for the GSC forcewake domain already exists, but we're missing
the register definitions and the domain intialization, so add that in.
v2: move reg definition to be in address order (Matt)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230817201831.1583172-6-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GSCCS has its own enable and mask registers. The interrupt identity
for the GSCCS shows OTHER_CLASS instance 6.
Bspec: 54029, 54030
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230817201831.1583172-4-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The first step in introducing the GSCCS is to add all the basic defs for
it (name, mmio base, class/instance, lrc size etc).
Bspec: 60149, 60421, 63752
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230817201831.1583172-3-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since this is specific to DirectX, we don't need it on Linux.
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230814150323.874033-1-shekhar.chauhan@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The workaround database tells us to set this bit, even though the bspec
indicates the bit doesn't exist on these platforms. Since this is a
write-only register, we also can't read back its value to verify whether
it's actually working or not. For now we'll trust that the workaround
database knows what it's talking about; if not, the hardware will just
ignore the attempt to write to a non-existent bit and it shouldn't cause
any problems.
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://lore.kernel.org/r/20230727220920.2291913-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sort it by register address to make it easy to update when needed.
v2: Do not create exception for registers with same functionality.
Always sort it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230726160708.3967790-11-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Top of DSM contains the WOPCM where kernel driver shouldn't access as
it contains data from other HW agents. Carve it out from the stolen
memory. On a MTL system, the output now matches the expected values:
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230726160708.3967790-10-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add the registers to get C6 residency of MTL SAMedia and
C6 status of MTL gts
v2:
- move register definitions to regs header (Anshuman)
- correct reg definition for mtl rc status
- make idle_status function common (Badal)
v3:
- remove extra line in commit message
- use only media type check in initialization
- use graphics ver check (Anshuman)
v4:
- remove extra lines (Anshuman)
Bspec: 66300
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This adds a handful of workarounds that apply to production steppings of
MTL:
- Wa_14018575942
- Wa_22016670082
- Wa_14017856879
- Wa_18019271663
Wa_22016670082 is currently only applied to the primary GT at the
moment, but may need to be extended to the media GT in the future if a
pending update to the workaround database gets finalized.
OOB workarounds will need to be implemented separately in future patches
for Wa_14016712196, Wa_16018063123, and Wa_18013179988.
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://lore.kernel.org/r/20230608181217.2385932-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We need to flush render caches before fence signalling, where we might
release the memory for reuse. We can't rely on userspace doing this,
so flush render caches after the batch, but before user fence- and
dma_fence signalling.
Copy the cache flush from i915, but omit PIPE_CONTROL_FLUSH_L3, since it
should be implied by the other flushes. Also omit
PIPE_CONTROL_TLB_INVALIDATE since there should be no apparent need to
invalidate TLB after batch completion.
v2:
- Update Makefile for OOB WA.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> #1
Reported-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/291
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/291
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For scratch table mode we need to cover the case where a scratch PTE might
have been pre-fetched and cached and used instead of that of the newly
bound vma.
For compute vms, invalidate TLB globally using GuC before signalling
bind complete. For !long-running vms, invalidate TLB at batch start.
Also document how TLB invalidation works.
v2:
- Fix a pointer to the comment about TLB invalidation (Jose Souza).
- Add a bool to the vm whether we want to invalidate TLB at batch start.
- Invalidate TLB also on BCS- and video engines at batch start where
needed.
- Use BIT() macro instead of explicit shift.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com> #v1
Reported-by: José Roberto de Souza <jose.souza@intel.com> #v1
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/291
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/291
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although PVC is currently the only platform that needs us to program a
GuC register with the index of an uncached MOCS entry, it's likely other
platforms will need this in the future. Rather than hardcoding PVC's
index into the register header, we should just pull the appropriate
index from gt->mocs.uc_index to future-proof the code.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20230602235210.1314028-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reformat the GuC register header according to the same rules used by
other register headers:
- Register definitions are ordered by offset
- Value of #define's start on column 49
- Lowercase used for hex values
No functional change.
This header has some things that aren't directly related to register
definitions (e.g., number of doorbells, doorbell info structure, GuC
interrupt vector layout, etc. These items have been moved to the bottom
of the header.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20230602235210.1314028-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that tiles and GTs are handled separately and other prerequisite
changes are in place, we're ready to re-enable the media GT.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-31-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The _total_vram_size helper is device based and is not complete.
Teach the helper to be tile aware and add the ability to size
DG1 correctly.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For platforms with GMD_ID registers, the IP stepping should be
determined from the 'revid' field of those registers rather than from
the PCI revid.
The hardware teams have indicated that they plan to keep the revid =>
stepping mapping consistent across all GMD_ID platforms, with major
steppings (A0, B0, C0, etc.) having revids that are multiples of 4, and
minor steppings (A1, A2, A3, etc.) taking the intermediate values. For
now we'll trust that hardware follows through on this plan; if they have
to change direction in the future (e.g., they wind up needing something
like an "A4" that doesn't fit this scheme), we can add a GMD_ID-based
lookup table when the time comes.
v2:
- Set xe->info.platform before finding stepping; the pre-GMD_ID code
relies on this value to pick a lookup table.
v3:
- Also set xe->info.subplatform before picking the stepping for
pre-GMD_ID lookup.
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20230524185952.666158-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This GuC register can be moved together with the rest of the
GuC register definitions and be named in a similar way.
v2: fix placement
Bspec: 63363
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> #v1
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rename the address field to "addr" rather than "reg" so it's easier to
understand what it is.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230508225322.2692066-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
guc_mmio_regset_write() had a flags for the registers to be added to the
GuC's regset list. The only register actually using that was RCU_MODE,
but it was setting the flags to a bogus value. From
struct xe_guc_fwif.h,
#define GUC_REGSET_MASKED BIT(0)
#define GUC_REGSET_MASKED_WITH_VALUE BIT(2)
#define GUC_REGSET_RESTORE_ONLY BIT(3)
Cross checking with i915, the only flag to set in RCU_MODE is
GUC_REGSET_MASKED. That can be done automatically from the register, as
long as the definition is correct.
Add the XE_REG_OPTION_MASKED annotation to RCU_MODE and kill the "flags"
field in guc_mmio_regset_write(): guc_mmio_regset_write_one() can decide
that based on the register being passed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230429062332.354139-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
copy cs instructions that dont have a explict MOCS field will use this
default MOCS value.
v2:
- move to xe_hw_engine.c
- remove BLIT_CCTL auxiliary macros
- removed MASKED_REG
v3:
- rebased
v4:
- process workaround in hwe->reg_lrc
v5:
- add a new function and call it from xe_gt_record_default_lrcs()
because hwe->reg_lrc is initialized later
BSpec: 45807
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
CS instructions that dont have a explicit MOCS field will use this
default MOCS value.
To do this, it was necessary to initialize part of the mocs earlier
and add new function that loads another array of rtp entries set
during run-time.
This is still missing to handle of mocs read for platforms with
HAS_L3_CCS_READ(aka PVC).
v2:
- move to xe_hw_engine.c
- remove CMD_CCTL auxiliary macros
v3:
- rebased
Bspec: 45826
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Go over all registers used in xe_rtp tables and mark the registers as
masked if they were passed a XE_RTP_ACTION_FLAG(MASKED_REG) flag.
This will allow the flag to be removed in future when xe_rtp starts
using the real xe_reg_t type.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-9-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
These should replace the _MMIO() and MCR_REG() from i915, with the goal
of being more extensible, allowing to pass the additional fields for
struct xe_reg and struct xe_reg_mcr. Replace all uses of _MMIO() and
MCR_REG() in xe.
Since the RTP, reg-save-restore and WA infra are not ready to use the
new type, just undef the macro like was done for the i915 types
previously. That conversion will come later.
v2: Remove MEDIA_SOFT_SCRATCH_COUNT/MEDIA_SOFT_SCRATCH re-added by
mistake (Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-8-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stop using i915 types for registers. Use our own types. Differently from
i915, this will keep under the register definition the knowledge for the
different types of registers. For now, the "flags"/"options" are mcr and
masked, although only the former is being used.
Additionally MCR registers have their own type. The only place that
should really look inside a xe_mcr_reg_t is that code dealing with the
steering and using other APIs when the register is MCR has been a source
of problem in the past.
Most of the driver is agnostic to the register differences since they
either use the definition from the header or already call the correct
MCR_REG()/_MMIO() macros. By embeding the struct xe_reg inside the
struct it's also possible to guarantee the compiler will break if
using RANDOM_MCR_REG.reg is attempted, since now the u32 is inside the
inner struct.
v2:
- Deep a dedicated type for MCR registers to avoid misuse
(Matt Roper, Jani)
- Drop the typedef and just use a struct since it's not an opaque type
(Jani)
- Add more kernel-doc
v3:
- Use only 22 bits for the register address since all the platforms
supported so far have only 4MB of MMIO per tile (Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-7-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Convert the macro declarations to the equivalent GENMASK and
and bitfield prep for all registers.
v2 (Matt Roper):
- Fix wrong conversion of RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_MASK
- Reorder fields of XEHP_SLICE_UNIT_LEVEL_CLKGATE for consistency
- Simplify CTC_SOURCE_* by only defining CTC_SOURCE_DIVIDE_LOGIC
as REG_BIT(0)
v3: Also remove DOP_CLOCK_GATE_ENABLE that is unused and wrongly defined
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The defines for the registers were brought over from i915 while
bootstrapping the driver. As xe supports TGL and later only, it doesn't
make sense to keep the GEN* prefixes and suffixes in the registers: TGL
is graphics version 12, previously called "GEN12". So drop the prefix
everywhere.
v2:
- Also drop _TGL suffix and reword commit message as suggested
by Matt Roper. While at it, rename VSUNIT_CLKGATE_DIS_TGL to
VSUNIT_CLKGATE2_DIS with the additional "2", so it doesn't clash
with the define for the other register
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cleanup GuC register declarations by converting them to use REG_FIELD,
REG_BIT and REG_GENMASK. While converting, also reorder the bitfields
so they follow the convention of declaring the higher bits first.
v2:
- Drop unused HUC_LOADING_AGENT_VCR and DMA_ADDRESS_SPACE_GTT (Matt Roper)
- Simplify HUC_LOADING_AGENT_GUC define (Matt Roper)
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There's no good reason to keep the GuC registers outside the regs/
directory: move the header with GuC registers under that.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There was both BLT_DEPTH_32 and XY_FAST_COLOR_BLT_DEPTH_32 - also add
the prefix to the first to make it clear this is about the FAST_**COPY**
operation. While at it, remove the GEN9_ prefix.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Follow up commits will mass-remove the gen prefix/suffix. For GEN6_RC0
and GEN6_RC6 that would make the variable too short and easy to
conflict. So, add "GT_" prefix that is also part of the register name.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On xe_hw_engine_print_state we were printing:
value_of(0x510) + 4 instead of
value_of(0x514) as desired.
So, let's properly define a RING_EXECLIST_SQ_CONTENTS_HI
register to fix the issue and also to avoid other issues
like that.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
The write of GFX_FLSH_CNTL_GEN6 was inherited from the i915 codebase
where it was used to force a flush of the write-combine buffer in cases
where the GSM/GGTT were mapped as WC. Since Xe never uses WC mappings
of the GGTT, this register write is unnecessary. Furthermore, this
register was removed on Xe_HP-based platforms, so this write winds up
clobbering an unrelated register.
v2:
- Also drop GFX_FLSH_CNTL_GEN6 from the register file now that it's no
longer used. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230418230247.3802438-1-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If graphics_desc and media_desc are not specified in a platform's
xe_device_desc, treat this as an indication that the IP version should
be determined from the hardware's GMD_ID register.
Note that leaving media_desc unset for a platform that simply doesn't
have the IP (e.g., PVC) is also okay --- a read of the GMD_ID register
offset will be attempted, but since there's no register at that location
a value of '0' will be returned, effectively disabling media support.
Mapping of version -> IP description is done via a table lookup; this
table will be re-used in future patches for some KUnit testing.
v2:
- Drop dummy structures. NULL can be safely used for both the GMD_ID
cases and the "media not present case."
- Use a table-based lookup of GMD_ID versions rather than a simple
switch statement; the table will allow us to easily perform kunit
testing of all the IP descriptors.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230406235621.1914492-8-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Any interrupt registers that were introduced by platforms i915
considered to be "gen11" or "gen12" are present on all platforms that
the Xe driver supports; drop the unnecessary prefixes.
While working in the area, also convert a few open-coded bit
manipulations over to REG_BIT and REG_FIELD_GET notation.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-5-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: removed display. That was later squashed to the xe Display patch]
For cases where IRQ_INIT and IRQ_RESET are used, the relevant interrupt
registers are always consecutive and ordered ISR, IMR, IIR, IER. Adding
helpers to look these up from a base offset will let us eliminate some
of the CPP pasting and simplify other upcoming patches.
v2:
- s/_REGS/_OFFSET/ for consistency. (Lucas)
- Move IMR/IIR/IER helpers into xe_irq.c; they aren't needed anywhere
else. (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230401002106.588656-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
PAT handling is growing in complexity and will continue to do so in
upcoming platforms. Separate it out to a dedicated file to keep things
tidy.
The code is moved as-is here (aside from a few unused #define's that are
just dropped); further changes will come in future patches.
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://lore.kernel.org/r/20230324210415.2434992-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Render / compute engines have additional caches (not just TLBs) that
need to be invalidated each batch, reinstate these invalidations in ring
ops.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although xe_migrate_clear() has a value argument, currently the driver
is only passing 0 at all the places this function is invoked with the
exception the kunit tests are using the parameter to validate this
function with different values.
xe_migrate_clear() is failing on platforms with link copy engines
because xe_migrate_clear() via emit_clear() is using the blitter
instruction XY_FAST_COLOR_BLT to clear the memory. But this instruction
is not supported by link copy engine.
So the solution is to use the alternate instruction MEM_SET when
platform contains link copy engine. But MEM_SET instruction accepts only
8-bit value for setting whereas the value agrument of xe_migrate_clear()
is 32-bit.
So instead of spreading this limitation around all invocations of
xe_migrate_clear() and causing more confusion, it was decided to not
accept any value itself as driver does not really need this currently.
All the kunit tests are adapted as per the new function prototype.
This will be followed by a patch to add support for link copy engines.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize LRC workarounds for graphics version 1200 with i915 up to
commit 7cdae9e9ee ("drm/i915: Move DG2 tuning to the right function").
These were probably missed for TGL/RKL before because in i915 it uses a
!IS_DG1() condition. Avoid a similar issue by just checking the
graphics version 1200 since DG1 is 1210.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-14-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 lrc workarounds as of
commit 4d14d7717f ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
A few simplifications were done when the WA should be applied to some
steps of a subplatform and all the steppings of the other subplatforms.
In this case, it was simply applied to all the steppings, which only
means applying it to a few more A* steppings.
The implementation of the workaround 16011186671 triggers a bug in the
RTP infra: it's not possible to set the flag the usual way when having
multiple actions in the entry. This may be fixed later, but for now it's
sufficient to just set the flag directly without the helper macro.
v2: Fix 14014947963 to use FIELD_SET (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-12-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 tunings as of
commit 4d14d7717f ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
Contrary to the tuning "gang timer" for TGL, there is no quick
justification for why the read back is disabled in i915. Keep it
with that flag for now. That can be tentatively removed later when the
read values are checked.
v2: Use XEHP_FF_MODE2 instead of GEN12_FF_MODE2 (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-11-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 gt workarounds as of
commit 4d14d7717f ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
A few simplifications were done when the WA should be applied to
some steps of a subplatform and all the steppings of the other
subplatforms. This happened with Wa_1509727124, Wa_22012856258 and a few
others. In figure the pre-production steppings will be removed, so this
can be already simplified a little bit.
v2:
- Make 1308578152 conditional on first gslice fused off
- Add the missing Wa_1608949956/Wa_14010198302 (Matt Roper)
v3:
- Do not duplicate the implementation of 18019627453 since it's
already covered by other WA numbers in graphics versions 1200 and
1210
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-10-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the DG2 gt workarounds as of
commit 4d14d7717f ("drm/i915/selftest: Fix ktime_get() and h/w access
order").
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-9-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sync PVC engine workarounds with i915.
v2: Remove 16016694945. It was added by mistake. It's a GT workaround,
already present in the GT table (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-8-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Synchronize with i915 the PVC gt workarounds as of committ
commit 4d14d7717f ("drm/i915/selftest: Fix ktime_get() and h/w
access order").
v2: Add masked flag to XEHPC_LNCFMISCCFGREG0 (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230314003012.2600353-7-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When this register was added in xe for some workarounds, it was copied
from i915 before the registers got changed to add the MCR annotation.
The register 0xe4f4 is MCR since gen8, long before any GPU supported by
the xe driver. Replace all occurrences with the right register.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230306165757.633796-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The following warning shows up for TGL:
[drm:xe_reg_sr_add [xe]] *ERROR* Discarding save-restore reg 6604 (clear: 00ff0000, set: 00040000, masked: no): ret=-22
[drm:xe_reg_sr_add [xe]] *ERROR* Discarding save-restore reg 6604 (clear: 00ff0000, set: 00040000, masked: no): ret=-22
That is because the same register is being set both by the WAs and the
tunings. Like was done in i915, prefer the tuning over the workaround
since that is applicable for more platforms. Also fix the tuning: it
was incorrectly using the MCR version of the register, but that only
became true in XEHP.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/233
Reported-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20230306212450.803557-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reduce the use of i915_reg_defs.h so it can be encapsulated in a single
place.
1) If it was being included by mistake, remove
2) If it was included for FIELD_GET()/FIELD_PREP()/GENMASK() and the
like, just include <linux/bitfield.h>
3) If it was included to be able to define additional registers, move
the registers to the relavant headers (regs/xe_regs.h or
regs/xe_gt_regs.h)
v2:
- Squash commit fixing i915_reg_defs.h include and with the one
introducing regs/xe_reg_defs.h
- Remove more cases of i915_reg_defs.h being used when all it was
needed was linux/bitfield.h (Matt Roper)
- Move some registers to the corresponding regs/*.h file (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo squashed here the removal of the i915 include]
Move a few defines from xe_guc_pc.c to the right register, now that
there is one: xe_gt_regs.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Copy the macros used by xe in i915_reg.h to regs/xe_regs.h. A minimal
cleanup is done while copying so they adhere minimally to the coding
style. Further reordering and cleaning is left for later.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Copy the macros used by xe in intel_gpu_commands.h to
regs/xe_gpu_commands.h. PIPE_CONTROL_3D_ENGINE_FLAGS and
PIPE_CONTROL_3D_ARCH_FLAGS were already defined in
drivers/gpu/drm/xe/xe_ring_ops.c and only used there. So let that define
to be used instead of also adding to the new header.
v2: Let PIPE_CONTROL_3D_ENGINE_FLAGS/PIPE_CONTROL_3D_ARCH_FLAGS in the
only .c that uses it instead of redefining (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Create regs/xe_lrc_layout.h file with all the offsets used by the xe
driver. Eventually the xe driver may use a different way to define them
since it doesn't supported below gen12.
v2: Rename file to intel_lrc_layout.h since it's not really about
registers (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Create regs/xe_gt_regs.h file with all the registers and bit
definitions used by the xe driver. Eventually the registers may be
defined in a different way and since xe doesn't supported below gen12,
the number of registers touched is much smaller, so create a new header.
The definitions themselves are direct copy from the
gt/intel_gt_regs.h file, just sorting the registers by address.
Cleaning those up and adhering to a common coding style is left for
later.
v2: Make the change to MCR_REG location in a separate patch to go
through the i915 branch (Matt Roper / Rodrigo)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Create regs/xe_engine_regs.h file with all the registers and bit
definitions used by the xe driver. Eventually the registers may be
defined in a different way and since xe doesn't supported below gen12,
the number of registers touched is much smaller, so create a new header.
The definitions themselves are direct copy from the
gt/intel_engine_regs.h file, just sorting the registers by address.
Cleaning those up and adhering to a common coding style is left for
later.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
