struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-7-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-4-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-3-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO core can handle input-only chips that don't implement the
direction_output() callback at all. There's no need for the driver to
provide a dummy implementation so drop it.
Link: https://lore.kernel.org/r/20250625081222.12744-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support for adding GPIs to the event FIFO. This is done by adding
irq_chip support. Like this, one can use the input gpio_keys driver as a
"frontend" device and input handler.
As part of this change, we now implement .request() and .free() as we can't
blindly consume all available pins as GPIOs (example: some pins can be
used for forming a keymap matrix).
Also note that the number of pins can now be obtained from the parent,
top level device. Hence the 'max_gpio' variable can be removed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-15-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
Support the adp5589 I/O expander which supports up to 19 pins. We need
to add a chip_info based struct since accessing register "banks"
and "bits" differs between devices.
Also some register addresses are different.
While at it move ADP558X_GPIO_MAX defines to the main header file and
rename them. That information will be needed by the top level device in
a following change.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-9-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
It makes no sense for a GPIO descriptor comparator to return true when
the arguments passed to it are NULL or IS_ERR(). Let's validate both and
return false unless both are valid GPIO descriptors.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/all/Z_aFBfjb17JxOwyk@black.fi.intel.com/
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20250620-gpiod-is-equal-improv-v1-2-a75060505d2c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
integers, so they can indicate failures. Convert the driver to using
them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f09a0481fc0ddafb9aa05d903fbb42ef52332c03.1750838486.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The GPIO core never passes empty bankmasks to the callbacks for handling
multiple signals at once. Remove the superfluous checks, and refactor
the code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/29fb200d3f92e79cdd5ce4048d2847c265f337b4.1750838486.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There's no corresponding platform_get_drvdata() used in this module or
the higher-level gpio-mmio. Let's remove the unneeded call to
platform_set_drvdata().
Link: https://lore.kernel.org/r/20250618074653.25555-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-10-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The lines on this chip are input-only. GPIO core can handle the missing
.set() callback so there's no need to implement a dummy here. Drop it.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-5-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-4-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-3-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Daniel Sullivan <danieljsullivan7@gmail.com>
Link: https://lore.kernel.org/r/aFdKce3Go9iF4A6m@danv-Standard-PC-Q35-ICH9-2009
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When invoking device_create_with_groups(), its return value is stored
in `data->cdev_base`. However, in case of faiure, `data` is first freed
and then derefernced in order to return `data->cdev_base`.
Fix the use-after-free by extracting the error code before free'ing
`data`.
Fixes: fd19792851 ("gpio: sysfs: remove the mockdev pointer from struct gpio_device")
Addresses-Coverity-ID: 1644512 ("Memory - illegal accesses (USE_AFTER_FREE)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Link: https://lore.kernel.org/r/20250622220221.28025-1-antonio@mandelbit.com
[Bartosz: added Fixes: tag, tweaked commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The usage of the mockdev pointer in struct gpio_device is limited to the
GPIO sysfs code. There's no reason to keep it in this top-level
structure. Create a separate structure containing the reference to the
GPIO device and the dummy class device that will be passed to
device_create_with_groups(). The !gdev->mockdev checks can be removed as
long as we make sure that all operations on the GPIO class are protected
with the sysfs lock.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-6-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
No symbols from the linux/idr.h or linux/spinlock.h headers are used in
this file so remove them. We also don't technically need linux/list.h
currently but one of the follow-up commits will start using it so let's
leave it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-5-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Update the code to be more consistent with the rest of the codebase.
Mostly correctly align line-breaks, remove unneeded tabs, stray newlines
& spaces and tweak the comment style.
No functional change.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-4-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
While not critical, it's useful to have the corresponding call to
mutex_destroy() whenever we use mutex_init(). Add the call right before
kfreeing the GPIO data.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-3-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We've converted this driver to using the new GPIO line value setters but
missed the instances where the legacy callback is accessed directly using
the function pointer. This will lead to a NULL-pointer dereference as
this pointer is no longer populated. The issue needs fixing locally as
well as in the already converted previously users of gpio-mmio.
Fixes: b908d35d00 ("gpio: mmio: use new GPIO line value setter callbacks")
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/all/2rw2sncevdiyirpdovotztlg77apcq2btzytuv5jnm55aqhlne@swtts3hl53tw/
Tested-by: Klara Modin <klarasmodin@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250618-gpio-mmio-fix-setter-v1-2-2578ffb77019@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We've converted this driver to using the new GPIO line value setters but
missed the instance where the legacy callback is accessed directly using
the function pointer. This will lead to a NULL-pointer dereference as
this pointer is no longer populated. Fix it.
Fixes: 0e1a8930c9 ("gpio: npcm-sgpio: use new GPIO line value setter callbacks")
Link: https://lore.kernel.org/r/20250618-gpio-mmio-fix-setter-v1-1-2578ffb77019@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add the BGPIOF_NO_INPUT to the gpio-mmio API.
-----BEGIN PGP SIGNATURE-----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=9ylk
-----END PGP SIGNATURE-----
Merge tag 'gpio-mmio-bgpiof-no-input-flag-for-v6.17' into gpio/for-next
Immutable tag for the pinctrl tree to pull from
Add the BGPIOF_NO_INPUT to the gpio-mmio API.
When using bgpio_init with a gpiochip acting as a GPO (output only), the
gpiochip ops `direction_input` was set to `bgpio_simple_dir_in` by
default but we have no input ability.
Adding this flag allows to set a valid ops for the `direction_output`
ops without setting a valid ops for `direction_input` by default.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250613-hdp-upstream-v5-1-6fd6f0dc527c@foss.st.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpio-mlxbf3 driver interfaces with two GPIO controllers,
device instance 0 and 1. There is a single IRQ resource shared
between the two controllers, and it is found in the ACPI table for
device instance 0. The driver should not attempt to get an IRQ
resource when probing device instance 1, otherwise the following
error is logged:
mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Fixes: cd33f216d2 ("gpio: mlxbf3: Add gpio driver support")
Link: https://lore.kernel.org/r/20250613163443.1065217-1-davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-gpio-v1-8-3a9a3c1472ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-gpio-v1-7-3a9a3c1472ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-gpio-v1-3-3a9a3c1472ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-gpio-v1-2-3a9a3c1472ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-gpio-v1-1-3a9a3c1472ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The second argument to dev_err_probe() is the error value. Pass the
return value of devm_request_threaded_irq() there instead of the irq
number.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes: c47f7ff0fe ("gpio: pca953x: Utilise dev_err_probe() where it makes sense")
Link: https://lore.kernel.org/r/20250616134503.1201138-1-s.hauer@pengutronix.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250614111216.93677-1-wahrenst@gmx.net
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
It is very useful to find driver implementing compatibles with `git grep
compatible`, so driver should not use defines for that string, even if
this means string will be effectively duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250613071627.46687-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpio-spacemit-k1 driver can be compiled as a module. Add missing
MODULE_DEVICE_TABLE so it can be matched by modalias and automatically
loaded by udev.
Fixes: d00553240e ("gpio: spacemit: add support for K1 SoC")
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250613-k1-gpio-of-table-v1-1-9015da8fdfdb@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper where applicable.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250611104348.192092-6-jirislaby@kernel.org
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
According to the description of the Loongson-7A2000 ACPI GPIO register in
the manual, its access mode should be BIT_CTRL_MODE, otherwise there maybe
some unpredictable behavior.
Cc: stable@vger.kernel.org
Fixes: 44fe79020b ("gpio: loongson-64bit: Add more gpio chip support")
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250610115926.347845-1-zhoubinbin@loongson.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently for CONFIG_GPIO_GENERIC=y each struct gpio_chip object
contains the fields relevant only for gpio-mmio users. It's not an
insignificant number either as it's several pointers and integers.
It makes sense to remove these fields from struct gpio_chip into a
dedicated structure but this is not trivial due to how the bgpio_init()
function is implemented.
Add a task for tracking this rework.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250527111353.71540-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no need to export GPIO_DYNAMIC_* constants, especially via
legacy header which is subject to remove. Move the mentioned constants
to its only user, i.e. gpiolib.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250531195801.3632110-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
It is reported that on Acer Nitro V15 suspend only works properly if the
keyboard backlight is turned off. In looking through the issue Acer Nitro
V15 has a GPIO (#8) specified in _AEI but it has no matching notify device
in _EVT. The values for GPIO #8 change as keyboard backlight is turned on
and off.
This makes it seem that GPIO #8 is actually supposed to be solely for
keyboard backlight. Turning off the interrupt for this GPIO fixes the issue.
Add a quirk that does just that.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4169
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Mika Westerberg <westeri@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where applicable
which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which will
take off the burden from GPIO drivers of checking this down the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter callbacks
- convert more drivers to making the irq_chip immutable as is recommended
by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built with
COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that makes
the setup easier for user-space than the existing driver-level sysfs
attributes and also adds more advanced configuration features (such as
referring to aggregated lines by their original names or modifying
their names as exposed by the aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the global
GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new
drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates
-----BEGIN PGP SIGNATURE-----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=PQqp
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
- Consolidate on one set of functions for the interrupt domain code to
get rid of pointlessly duplicated code with only marginal different
semantics.
- Update the documentation accordingly and consolidate the coding style
of the irqdomain header.
-----BEGIN PGP SIGNATURE-----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=9nLp
-----END PGP SIGNATURE-----
Merge tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
- Convert the generic interrupt chip to lock guards to remove copy &
pasta boilerplate code and gotos.
- A new driver fot the interrupt controller in the EcoNet EN751221 MIPS SoC.
- Extend the SG2042-MSI driver to support the new SG2044 SoC
- Updates and cleanups for the (ancient) VT8500 driver
- Improve the scalability of the ARM GICV4.1 ITS driver by utilizing node
local copies a VM's interrupt translation table when possible. This
results in a 12% reduction of VM IPI latency in certain workloads.
- The usual cleanups and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=OS2H
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq controller updates from Thomas Gleixner:
"Update for interrupt chip drivers:
- Convert the generic interrupt chip to lock guards to remove copy &
pasta boilerplate code and gotos.
- A new driver fot the interrupt controller in the EcoNet EN751221
MIPS SoC.
- Extend the SG2042-MSI driver to support the new SG2044 SoC
- Updates and cleanups for the (ancient) VT8500 driver
- Improve the scalability of the ARM GICV4.1 ITS driver by utilizing
node local copies a VM's interrupt translation table when possible.
This results in a 12% reduction of VM IPI latency in certain
workloads.
- The usual cleanups and improvements all over the place"
* tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/irq-pruss-intc: Simplify chained interrupt handler setup
irqchip/gic-v4.1: Use local 4_1 ITS to generate VSGI
irqchip/econet-en751221: Switch to of_fwnode_handle()
irqchip/irq-vt8500: Switch to irq_domain_create_*()
irqchip/econet-en751221: Switch to irq_domain_create_linear()
irqchip/irq-vt8500: Use fewer global variables and add error handling
irqchip/irq-vt8500: Use a dedicated chained handler function
irqchip/irq-vt8500: Don't require 8 interrupts from a chained controller
irqchip/irq-vt8500: Drop redundant copy of the device node pointer
irqchip/irq-vt8500: Split up ack/mask functions
irqchip/sg2042-msi: Fix wrong type cast in sg2044_msi_irq_ack()
irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller
irqchip/sg2042-msi: Introduce configurable chipinfo for SG2042
irqchip/sg2042-msi: Rename functions and data structures to be SG2042 agnostic
dt-bindings: interrupt-controller: Add Sophgo SG2044 MSI controller
genirq/generic-chip: Fix incorrect lock guard conversions
genirq/generic-chip: Remove unused lock wrappers
irqchip: Convert generic irqchip locking to guards
gpio: mvebu: Convert generic irqchip locking to guard()
ARM: orion/gpio:: Convert generic irqchip locking to guard()
...
portions when using hogs.
First patch hits into the gpiolib making gpiochip_line_is_valid()
NULL-tolerant.
Second patch fixes the actual problem.
-----BEGIN PGP SIGNATURE-----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=EGi8
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"This deals with a crash in the Qualcomm pin controller GPIO
parts when using hogs.
The first patch to gpiolib makes gpiochip_line_is_valid()
NULL-tolerant.
The second patch fixes the actual problem"
* tag 'pinctrl-v6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: switch to devm_register_sys_off_handler()
gpiolib: don't crash on enabling GPIO HOG pins
This driver uses gpiochip_irq_reqres() and gpiochip_irq_relres() which
are only built with GPIOLIB_IRQCHIP=y. Add the missing Kconfig select.
Fixes: 2993d2dd8f ("gpio: timberdale: Make irq_chip immutable")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250522-gpio-fix-v1-4-98ceae7c4c3c@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver uses gpiochip_irq_reqres() and gpiochip_irq_relres() which
are only built with GPIOLIB_IRQCHIP=y. Add the missing Kconfig select.
Fixes: 289e42df13 ("gpio: lpc18xx: Make irq_chip immutable")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250522-gpio-fix-v1-3-98ceae7c4c3c@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver uses gpiochip_irq_reqres() and gpiochip_irq_relres() which
are only built with GPIOLIB_IRQCHIP=y. Add the missing Kconfig select.
Fixes: a30be40bf1 ("gpio: grgpio: Make irq_chip immutable")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250522-gpio-fix-v1-2-98ceae7c4c3c@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver uses gpiochip_irq_reqres() and gpiochip_irq_relres() which
are only built with GPIOLIB_IRQCHIP=y. Add the missing Kconfig select.
Fixes: 7b04f98027 ("gpio: bcm-kona: make irq_chip immutable")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250522-gpio-fix-v1-1-98ceae7c4c3c@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
* Split GPIO ACPI quirks to its own file
* Refactored GPIO ACPI library to shrink the code
The following is an automated git shortlog grouped by driver:
gpiolib:
- acpi: Update file references in the Documentation and MAINTAINERS
- acpi: Move quirks to a separate file
- acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
- acpi: Handle deferred list via new API
- acpi: Make sure we fill struct acpi_gpio_info
- acpi: Switch to use enum in acpi_gpio_in_ignore_list()
- acpi: Use temporary variable for struct acpi_gpio_info
- acpi: Deduplicate some code in __acpi_find_gpio()
- acpi: Reuse struct acpi_gpio_params in struct acpi_gpio_lookup
- acpi: Rename par to params for better readability
- acpi: Reduce memory footprint for struct acpi_gpio_params
- acpi: Remove index parameter from acpi_gpio_property_lookup()
- acpi: Improve struct acpi_gpio_info memory footprint
-----BEGIN PGP SIGNATURE-----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=WChc
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.16-1
* Split GPIO ACPI quirks to its own file
* Refactored GPIO ACPI library to shrink the code
The following is an automated git shortlog grouped by driver:
gpiolib:
- acpi: Update file references in the Documentation and MAINTAINERS
- acpi: Move quirks to a separate file
- acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
- acpi: Handle deferred list via new API
- acpi: Make sure we fill struct acpi_gpio_info
- acpi: Switch to use enum in acpi_gpio_in_ignore_list()
- acpi: Use temporary variable for struct acpi_gpio_info
- acpi: Deduplicate some code in __acpi_find_gpio()
- acpi: Reuse struct acpi_gpio_params in struct acpi_gpio_lookup
- acpi: Rename par to params for better readability
- acpi: Reduce memory footprint for struct acpi_gpio_params
- acpi: Remove index parameter from acpi_gpio_property_lookup()
- acpi: Improve struct acpi_gpio_info memory footprint
The gpiolib-acpi.c is huge enough even without DMI quirks.
Move them to a separate file for a better maintenance.
No functional change intended.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add acpi_gpio_need_run_edge_events_on_boot() getter which moves
towards isolating the GPIO ACPI and quirk APIs. It will helps
splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Introduce a new API and handle deferred list via it which moves
towards isolating the GPIO ACPI and quirk APIs. It will helps
splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Switch to use enum instead of pointers in acpi_gpio_in_ignore_list()
which moves towards isolating the GPIO ACPI and quirk APIs. It will
helps splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The previous refactoring missed the filling of the struct acpi_gpio_info
and that's how the lot of the code got eliminated. Restore those pieces
by passing the pointer all down in the call stack.
With this, the code grows by ~6%, but in conjunction with the previous
refactoring it still gives -387 bytes
add/remove: 2/0 grow/shrink: 5/1 up/down: 852/-35 (817)
Function old new delta
acpi_dev_gpio_irq_wake_get_by 129 695 +566
acpi_find_gpio 216 354 +138
acpi_find_gpio.__UNIQUE_ID_ddebug504 - 56 +56
acpi_dev_gpio_irq_wake_get_by.__UNIQUE_ID_ddebug506 - 56 +56
acpi_populate_gpio_lookup 536 548 +12
acpi_gpio_property_lookup 414 426 +12
acpi_get_gpiod_by_index 307 319 +12
__acpi_find_gpio 638 603 -35
Total: Before=14154, After=14971, chg +5.77%
As a positive side effect, it improves memory footprint for
struct acpi_gpio_lookup. `pahole` difference before and after:
- /* size: 64, cachelines: 1, members: 4 */
- /* member types with holes: 1, total: 1 */
+ /* size: 32, cachelines: 1, members: 4 */
Reported-by: Kees Bakker <kees@ijzerbout.nl>
Closes: https://lore.kernel.org/r/9715c8dd-38df-48fd-a9d1-7a78163dc989@ijzerbout.nl
Fixes: 8b4f52ef7a ("gpiolib: acpi: Deduplicate some code in __acpi_find_gpio()")
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use temporary variable to access the struct acpi_gpio_info members.
This will help further changes to be cleaner. No functional change
intended.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
On Qualcomm platforms if the board uses GPIO hogs msm_pinmux_request()
calls gpiochip_line_is_valid(). After commit 8015443e24 ("gpio: Hide
valid_mask from direct assignments") gpiochip_line_is_valid() uses
gc->gpiodev, which is NULL when GPIO hog pins are being processed.
Thus after this commit using GPIO hogs causes the following crash. In
order to fix this, verify that gc->gpiodev is not NULL.
Note: it is not possible to reorder calls (e.g. by calling
msm_gpio_init() before pinctrl registration or by splitting
pinctrl_register() into _and_init() and pinctrl_enable() and calling the
latter function after msm_gpio_init()) because GPIO chip registration
would fail with EPROBE_DEFER if pinctrl is not enabled at the time of
registration.
pc : gpiochip_line_is_valid+0x4/0x28
lr : msm_pinmux_request+0x24/0x40
sp : ffff8000808eb870
x29: ffff8000808eb870 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff726240f9d040 x24: 0000000000000000
x23: ffff7262438c0510 x22: 0000000000000080 x21: ffff726243ea7000
x20: ffffab13f2c4e698 x19: 0000000000000080 x18: 00000000ffffffff
x17: ffff726242ba6000 x16: 0000000000000100 x15: 0000000000000028
x14: 0000000000000000 x13: 0000000000002948 x12: 0000000000000003
x11: 0000000000000078 x10: 0000000000002948 x9 : ffffab13f50eb5e8
x8 : 0000000003ecb21b x7 : 000000000000002d x6 : 0000000000000b68
x5 : 0000007fffffffff x4 : ffffab13f52f84a8 x3 : ffff8000808eb804
x2 : ffffab13f1de8190 x1 : 0000000000000080 x0 : 0000000000000000
Call trace:
gpiochip_line_is_valid+0x4/0x28 (P)
pin_request+0x208/0x2c0
pinmux_enable_setting+0xa0/0x2e0
pinctrl_commit_state+0x150/0x26c
pinctrl_enable+0x6c/0x2a4
pinctrl_register+0x3c/0xb0
devm_pinctrl_register+0x58/0xa0
msm_pinctrl_probe+0x2a8/0x584
sdm845_pinctrl_probe+0x20/0x88
platform_probe+0x68/0xc0
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x208/0x5e8
worker_thread+0x1b4/0x35c
kthread+0x144/0x220
ret_from_fork+0x10/0x20
Code: b5fffba0 17fffff2 9432ec27 f9400400 (f9428800)
Fixes: 8015443e24 ("gpio: Hide valid_mask from direct assignments")
Reported-by: Doug Anderson <dianders@chromium.org>
Closes: https://lore.kernel.org/r/CAD=FV=Vg8_ZOLgLoC4WhFPzhVsxXFC19NrF38W6cW_W_3nFjbw@mail.gmail.com
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-1-249999af0fc1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/20250319092951.37667-44-jirislaby@kernel.org
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-18-jirislaby@kernel.org
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Constify pxa_muxed_gpio_chip, flag the irq_chip as IRQCHIP_IMMUTABLE,
add the new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-9-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Constify timbgpio_irqchip, flag the irq_chip as IRQCHIP_IMMUTABLE,
add the new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-8-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Constify xgene_gpio_sb_irq_chip, flag the irq_chip as IRQCHIP_IMMUTABLE,
add the new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-7-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Constify gpio_irqchip, flag the irq_chip as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-6-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use "struct davinci_gpio_controller *chips" as irq chip data to prepare
for immutable irq chip, then it will be easy to get gpio_chip pointer in
irq mask/unmask.
No functional change.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-5-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Flag the irq_chip as IRQCHIP_IMMUTABLE, add the new helper functions,
and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-4-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Constify lpc18xx_gpio_pin_ic, flag the irq_chip as IRQCHIP_IMMUTABLE,
add the new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-3-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Constify grgpio_irq_chip, flag the irq_chip as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-2-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiolib is moving to make irq_chip immutable, otherwise
there is warning: "not an immutable chip, please consider fixing it!"
The bcm_gpio_irq_chip already has irq hooks configured correctly,
bcm_kona_gpio_irq_mask/bcm_kona_gpio_irq_unmask calls gpiochip_disable_irq/
gpiochip_enable_irq, and bcm_kona_gpio_irq_reqres/irq_release_resources
calls gpiochip_reqres_irq/gpiochip_relres_irq.
So just need to flag it as IRQCHIP_IMMUTABLE.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250509-gpio-v1-1-639377c98288@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
drivers/pinctrl/pinctrl-at91.c uses struct gpio_chip::base to find out
which bit to set in a register:
dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset);
mask = 1 << (offset - chip->base);
This adds a non-obvious dependency on the global numberspace from the
GPIO driver itself, even if all consumers use the descriptor API.
More such instances may exist and will need to be fixed in the quest for
removal of the global numberspace, so add a reminder about it to the
TODO list.
Link: https://lore.kernel.org/all/1d00c056-3d61-4c22-bedd-3bae0bf1ddc4@pengutronix.de/
Suggested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250507-gpio-chip-base-readback-v1-1-ade56e38480b@pengutronix.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
i.MX GPIO numbering has been deterministic since commit 7e6086d9e5
("gpio/mxc: specify gpio base for device tree probe"), a year after
device tree support was first added back in 2011.
Reverting to dynamically allocated GPIO base now would break most
systems making use of the sysfs API. These systems will be eventually
broken by the removal of the sysfs API, but that would result in GPIO
scripts not working instead of essentially toggling at random according
to probe order, which would happen if we unconditionally set base to -1.
Yet, the warning is annoying and has resulted in many rejected attempts
to remove it over the years[1][2][3].
As the i.MX GPIO driver is device tree only, GPIO_SYSFS is the only
consumer of the deterministic GPIO numbering. Let's therefore restrict the
static base and the warning that comes with it to configurations
with CONFIG_GPIO_SYSFS enabled.
[1]: https://lore.kernel.org/all/20230226205319.1013332-1-dario.binacchi@amarulasolutions.com/
[2]: https://lore.kernel.org/all/20230506085928.933737-2-haibo.chen@nxp.com/
[3]: https://lore.kernel.org/all/20241121145515.3087855-1-catalin.popescu@leica-geosystems.com/
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250507-b4-imx-gpio-base-warning-v2-1-d43d09e2c6bf@pengutronix.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250506-gpiochip-set-rv-gpio-part3-v1-5-0fbdea5a9667@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=2dKC
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-nvmem-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO and NVMEM due for the v6.16 merge window
If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.
As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.
Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.
An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.
Fixes: b765743005 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
This driver supports the GPIO functions using the platform device
registered by the core MFD driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-2-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The blzp1600_gpio_of_match is defined unconditionally and can always be referenced
by the driver, so don't use of_match_ptr() and avoid this warning:
drivers/gpio/gpio-blzp1600.c:263:34: error: 'blzp1600_gpio_of_match' defined but not used [-Werror=unused-const-variable=]
263 | static const struct of_device_id blzp1600_gpio_of_match[] = {
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250502203721.2117186-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-gpio-part2-v1-12-b22245cde81a@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-gpio-part2-v1-11-b22245cde81a@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-gpio-part2-v1-10-b22245cde81a@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-gpio-part2-v1-9-b22245cde81a@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-gpio-part2-v1-8-b22245cde81a@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-gpio-part2-v1-7-b22245cde81a@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-gpio-part2-v1-6-b22245cde81a@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-gpio-part2-v1-5-b22245cde81a@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-gpio-part2-v1-4-b22245cde81a@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With a recently added helper we can complete the conversion of
the GPIOLIB code to use devm_add_action() in all suitable cases.
So do this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250220162238.2738038-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Adds support for level-triggered interrupts in the PCA953x GPIO
expander driver. Previously, the driver only supported edge-triggered
interrupts, which could lead to missed events in scenarios where an
interrupt condition persists until it is explicitly cleared.
By enabling level-triggered interrupts, the driver can now detect and
respond to sustained interrupt conditions more reliably.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://lore.kernel.org/r/20250409-gpio-pca953x-level-triggered-irq-v3-1-7f184d814934@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Support for building it as a module for use on the Android platform,
because the Android kernel(GKI) doesn't contain board-specific drivers,
it requires that these drivers be built as a module and loaded into the
system.
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Link: https://lore.kernel.org/r/20250416062605.1948856-1-jindong.yue@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When building gpio-ich.c for a platform that does not have IO port
access like s390, there are several errors due to the use of inl() and
outl() throughout the driver:
drivers/gpio/gpio-ich.c: In function 'ichx_read_bit':
include/asm-generic/io.h:578:14: error: call to '_inl' declared with attribute error: inl() requires CONFIG_HAS_IOPORT
Only allow compile testing when the targeted platform selects HAS_IOPORT
so that there are no compile time errors.
Fixes: f3592d252f ("gpio: ich: enable building with COMPILE_TEST=y")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504171941.g1yXja0j-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250418-gpio-ich-fix-build-without-ioport-v1-1-83fc753438ec@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In some functions the returned variable is assigned to 0 and then
reassigned to the actual value. Remove redundant assignments.
In one case make it more clear that the assignment is not needed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There are two variables for the same used in the gpiod_to_irq().
Replace the second by reusing the function top-level one.
While at it, refactor the branch to have less lines of code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Call validate_desc() directly when VALIDATE_DESC() can't be used.
It will print additional information useful for debugging.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Move validate_desc() and Co upper in the code to be able to use
in the further changes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
No need to double check the pointer for NULL since gpiod_free()
is using VALIDATE_DESC_VOID() which simply returns in that case.
This reverts commit 1d7765ba15.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Print the actual error when descriptor contains an error pointer.
This might help debugging those rare cases.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The driver uses guard()()/scoped_guard() for the rest of the synchronisation
calls. Convert to use the same for gpio_machine_hogs_mutex.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There are two ways to take a lock: plain call to the mutex_lock()
or using guard()() / scoped_guard(). The driver inconsistently uses
both. Make taking gpio_lookup_lock consistent.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Implement GPIO functionality which capable of setting pin as
input, output. Also, each pin can be used as interrupt which
support rising, falling, or both edge type trigger.
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250412-03-k1-gpio-v8-2-1c6862d272ec@gentoo.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Use the generic boolean device property getter instead of the
OF-specific variant. This allows us to stop pulling in linux/of.h. While
at it: drop the of_irq.h inclusion as none of its symbols are used in
this driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
Link: https://lore.kernel.org/r/20250408143629.125576-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This is already done by the gpio-regmap abstraction by calling
gpiochip_get_ngpios(). We don't need to do this at the driver level.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250408-gpio-regmap-ngpios-v2-1-26f254014f57@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-12-78399683ca38@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-10-78399683ca38@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-8-78399683ca38@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
