Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-08-31 22:23:05 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
loongarch-next
linux-loongson/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
Taniya Das f716f5dcf5 arm64: dts: qcom: qcs6490-rb3gen2: Update the LPASS audio node 
Update the lpassaudio node to support the new compatible as the
lpassaudio needs to support the reset functionality on the
QCS6490 RB3Gen2 board and the rest of the Audio functionality would be
provided from the LPASS firmware.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250221-lpass_qcm6490_resets-v5-4-6be0c0949a83@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-04-15 21:38:48 -05:00

1272 lines
26 KiB
Plaintext
Raw Permalink Blame History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
/dts-v1/;
/* PM7250B is configured to use SID8/9 */
#define PM7250B_SID 8
#define PM7250B_SID1 9
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sc7280.dtsi"
#include "pm7250b.dtsi"
#include "pm7325.dtsi"
#include "pm8350c.dtsi"
#include "pmk8350.dtsi"
/delete-node/ &ipa_fw_mem;
/delete-node/ &rmtfs_mem;
/delete-node/ &adsp_mem;
/delete-node/ &cdsp_mem;
/delete-node/ &video_mem;
/delete-node/ &wlan_ce_mem;
/delete-node/ &wpss_mem;
/delete-node/ &xbl_mem;
/ {
model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
chassis-type = "embedded";
aliases {
serial0 = &uart5;
serial1 = &uart7;
};
chosen {
stdout-path = "serial0:115200n8";
};
dp-connector {
compatible = "dp-connector";
label = "DP";
type = "mini";
hpd-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
port {
dp_connector_in: endpoint {
remote-endpoint = <&mdss_edp_out>;
};
};
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&lt9611_out>;
};
};
};
lt9611_1v2: lt9611-vdd12-regulator {
compatible = "regulator-fixed";
regulator-name = "LT9611_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
reserved-memory {
xbl_mem: xbl@80700000 {
reg = <0x0 0x80700000 0x0 0x100000>;
no-map;
};
cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
reg = <0x0 0x81800000 0x0 0x1e00000>;
no-map;
};
camera_mem: camera@84300000 {
reg = <0x0 0x84300000 0x0 0x500000>;
no-map;
};
wpss_mem: wpss@84800000 {
reg = <0x0 0x84800000 0x0 0x1900000>;
no-map;
};
adsp_mem: adsp@86100000 {
reg = <0x0 0x86100000 0x0 0x2800000>;
no-map;
};
cdsp_mem: cdsp@88900000 {
reg = <0x0 0x88900000 0x0 0x1e00000>;
no-map;
};
video_mem: video@8a700000 {
reg = <0x0 0x8a700000 0x0 0x700000>;
no-map;
};
cvp_mem: cvp@8ae00000 {
reg = <0x0 0x8ae00000 0x0 0x500000>;
no-map;
};
ipa_fw_mem: ipa-fw@8b300000 {
reg = <0x0 0x8b300000 0x0 0x10000>;
no-map;
};
ipa_gsi_mem: ipa-gsi@8b310000 {
reg = <0x0 0x8b310000 0x0 0xa000>;
no-map;
};
gpu_microcode_mem: gpu-microcode@8b31a000 {
reg = <0x0 0x8b31a000 0x0 0x2000>;
no-map;
};
tz_stat_mem: tz-stat@c0000000 {
reg = <0x0 0xc0000000 0x0 0x100000>;
no-map;
};
tags_mem: tags@c0100000 {
reg = <0x0 0xc0100000 0x0 0x1200000>;
no-map;
};
qtee_mem: qtee@c1300000 {
reg = <0x0 0xc1300000 0x0 0x500000>;
no-map;
};
trusted_apps_mem: trusted-apps@c1800000 {
reg = <0x0 0xc1800000 0x0 0x1c00000>;
no-map;
};
debug_vm_mem: debug-vm@d0600000 {
reg = <0x0 0xd0600000 0x0 0x100000>;
no-map;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&kypd_vol_up_n>;
pinctrl-names = "default";
key-volume-up {
label = "Volume Up";
gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
linux,can-disable;
};
};
pmic-glink {
compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_hs_in: endpoint {
remote-endpoint = <&usb_1_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss_in: endpoint {
remote-endpoint = <&redriver_usb_con_ss>;
};
};
port@2 {
reg = <2>;
pmic_glink_sbu_in: endpoint {
remote-endpoint = <&redriver_usb_con_sbu>;
};
};
};
};
};
thermal-zones {
sdm-skin-thermal {
thermal-sensors = <&pmk8350_adc_tm 3>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
quiet-thermal {
thermal-sensors = <&pmk8350_adc_tm 1>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
xo-thermal {
thermal-sensors = <&pmk8350_adc_tm 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
wcn6750-pmu {
compatible = "qcom,wcn6750-pmu";
pinctrl-0 = <&bt_en>;
pinctrl-names = "default";
vddaon-supply = <&vreg_s7b_0p972>;
vddasd-supply = <&vreg_l11c_2p8>;
vddpmu-supply = <&vreg_s7b_0p972>;
vddrfa0p8-supply = <&vreg_s7b_0p972>;
vddrfa1p2-supply = <&vreg_s8b_1p272>;
vddrfa1p7-supply = <&vreg_s1b_1p872>;
vddrfa2p2-supply = <&vreg_s1c_2p19>;
bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
regulators {
vreg_pmu_rfa_cmn: ldo0 {
regulator-name = "vreg_pmu_rfa_cmn";
};
vreg_pmu_aon_0p59: ldo1 {
regulator-name = "vreg_pmu_aon_0p59";
};
vreg_pmu_wlcx_0p8: ldo2 {
regulator-name = "vreg_pmu_wlcx_0p8";
};
vreg_pmu_wlmx_0p85: ldo3 {
regulator-name = "vreg_pmu_wlmx_0p85";
};
vreg_pmu_btcmx_0p85: ldo4 {
regulator-name = "vreg_pmu_btcmx_0p85";
};
vreg_pmu_rfa_0p8: ldo5 {
regulator-name = "vreg_pmu_rfa_0p8";
};
vreg_pmu_rfa_1p2: ldo6 {
regulator-name = "vreg_pmu_rfa_1p2";
};
vreg_pmu_rfa_1p7: ldo7 {
regulator-name = "vreg_pmu_rfa_1p7";
};
vreg_pmu_pcie_0p9: ldo8 {
regulator-name = "vreg_pmu_pcie_0p9";
};
vreg_pmu_pcie_1p8: ldo9 {
regulator-name = "vreg_pmu_pcie_1p8";
};
};
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm7325-rpmh-regulators";
qcom,pmic-id = "b";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
vdd-l2-l7-supply = <&vreg_bob_3p296>;
vdd-l3-supply = <&vreg_s2b_0p876>;
vdd-l5-supply = <&vreg_s2b_0p876>;
vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
vdd-l8-supply = <&vreg_s7b_0p972>;
vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
vdd-l13-supply = <&vreg_s7b_0p972>;
vdd-l14-l16-supply = <&vreg_s8b_1p272>;
vreg_s1b_1p872: smps1 {
regulator-name = "vreg_s1b_1p872";
regulator-min-microvolt = <1840000>;
regulator-max-microvolt = <2040000>;
};
vreg_s2b_0p876: smps2 {
regulator-name = "vreg_s2b_0p876";
regulator-min-microvolt = <570070>;
regulator-max-microvolt = <1050000>;
};
vreg_s7b_0p972: smps7 {
regulator-name = "vreg_s7b_0p972";
regulator-min-microvolt = <535000>;
regulator-max-microvolt = <1120000>;
};
vreg_s8b_1p272: smps8 {
regulator-name = "vreg_s8b_1p272";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1500000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
};
vreg_l1b_0p912: ldo1 {
regulator-name = "vreg_l1b_0p912";
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <925000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p072: ldo2 {
regulator-name = "vreg_l2b_3p072";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3b_0p504: ldo3 {
regulator-name = "vreg_l3b_0p504";
regulator-min-microvolt = <312000>;
regulator-max-microvolt = <910000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4b_0p752: ldo4 {
regulator-name = "vreg_l4b_0p752";
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <820000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
reg_l5b_0p752: ldo5 {
regulator-name = "reg_l5b_0p752";
regulator-min-microvolt = <552000>;
regulator-max-microvolt = <832000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p2: ldo6 {
regulator-name = "vreg_l6b_1p2";
regulator-min-microvolt = <1140000>;
regulator-max-microvolt = <1260000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_2p952: ldo7 {
regulator-name = "vreg_l7b_2p952";
regulator-min-microvolt = <2952000>;
regulator-max-microvolt = <2952000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8b_0p904: ldo8 {
regulator-name = "vreg_l8b_0p904";
regulator-min-microvolt = <870000>;
regulator-max-microvolt = <970000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_1p2: ldo9 {
regulator-name = "vreg_l9b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11b_1p504: ldo11 {
regulator-name = "vreg_l11b_1p504";
regulator-min-microvolt = <1504000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12b_0p751: ldo12 {
regulator-name = "vreg_l12b_0p751";
regulator-min-microvolt = <751000>;
regulator-max-microvolt = <824000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13b_0p53: ldo13 {
regulator-name = "vreg_l13b_0p53";
regulator-min-microvolt = <530000>;
regulator-max-microvolt = <824000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_1p08: ldo14 {
regulator-name = "vreg_l14b_1p08";
regulator-min-microvolt = <1080000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b_0p765: ldo15 {
regulator-name = "vreg_l15b_0p765";
regulator-min-microvolt = <765000>;
regulator-max-microvolt = <1020000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16b_1p1: ldo16 {
regulator-name = "vreg_l16b_1p1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17b_1p7: ldo17 {
regulator-name = "vreg_l17b_1p7";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18b_1p8: ldo18 {
regulator-name = "vreg_l18b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l19b_1p8: ldo19 {
regulator-name = "vreg_l19b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8350c-rpmh-regulators";
qcom,pmic-id = "c";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-l1-l12-supply = <&vreg_s1b_1p872>;
vdd-l2-l8-supply = <&vreg_s1b_1p872>;
vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
vdd-l10-supply = <&vreg_s7b_0p972>;
vdd-bob-supply = <&vph_pwr>;
vreg_s1c_2p19: smps1 {
regulator-name = "vreg_s1c_2p19";
regulator-min-microvolt = <2190000>;
regulator-max-microvolt = <2210000>;
};
vreg_s2c_0p752: smps2 {
regulator-name = "vreg_s2c_0p752";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <800000>;
};
vreg_s5c_0p752: smps5 {
regulator-name = "vreg_s5c_0p752";
regulator-min-microvolt = <465000>;
regulator-max-microvolt = <1050000>;
};
vreg_s7c_0p752: smps7 {
regulator-name = "vreg_s7c_0p752";
regulator-min-microvolt = <465000>;
regulator-max-microvolt = <800000>;
};
vreg_s9c_1p084: smps9 {
regulator-name = "vreg_s9c_1p084";
regulator-min-microvolt = <1010000>;
regulator-max-microvolt = <1170000>;
};
vreg_l1c_1p8: ldo1 {
regulator-name = "vreg_l1c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1980000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_1p62: ldo2 {
regulator-name = "vreg_l2c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <1980000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_2p8: ldo3 {
regulator-name = "vreg_l3c_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3540000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c_1p62: ldo4 {
regulator-name = "vreg_l4c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5c_1p62: ldo5 {
regulator-name = "vreg_l5c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c_2p96: ldo6 {
regulator-name = "vreg_l6c_2p96";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
regulator-name = "vreg_l7c_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p62: ldo8 {
regulator-name = "vreg_l8c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p96: ldo9 {
regulator-name = "vreg_l9c_2p96";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <35440000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_0p88: ldo10 {
regulator-name = "vreg_l10c_0p88";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1050000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_2p8: ldo11 {
regulator-name = "vreg_l11c_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12c_1p65: ldo12 {
regulator-name = "vreg_l12c_1p65";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13c_2p7: ldo13 {
regulator-name = "vreg_l13c_2p7";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob_3p296: bob {
regulator-name = "vreg_bob_3p296";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
};
};
};
&gcc {
protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
<GCC_MSS_CFG_AHB_CLK>,
<GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
<GCC_MSS_OFFLINE_AXI_CLK>,
<GCC_MSS_Q6SS_BOOT_CLK_SRC>,
<GCC_MSS_Q6_MEMNOC_AXI_CLK>,
<GCC_MSS_SNOC_AXI_CLK>,
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
<GCC_SEC_CTRL_CLK_SRC>,
<GCC_WPSS_AHB_BDG_MST_CLK>,
<GCC_WPSS_AHB_CLK>,
<GCC_WPSS_RSCP_CLK>;
};
&gpi_dma0 {
status = "okay";
};
&gpi_dma1 {
status = "okay";
};
&gpu {
status = "okay";
};
&gpu_zap_shader {
firmware-name = "qcom/qcs6490/a660_zap.mbn";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
lt9611_codec: hdmi-bridge@2b {
compatible = "lontium,lt9611uxc";
reg = <0x2b>;
interrupts-extended = <&tlmm 24 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>;
vdd-supply = <&lt9611_1v2>;
vcc-supply = <&vreg_l11c_2p8>;
pinctrl-names = "default";
pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lt9611_a: endpoint {
remote-endpoint = <&mdss_dsi0_out>;
};
};
port@2 {
reg = <2>;
lt9611_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
};
&i2c1 {
clock-frequency = <100000>;
status = "okay";
typec-mux@1c {
compatible = "onnn,nb7vpq904m";
reg = <0x1c>;
vcc-supply = <&vreg_l18b_1p8>;
retimer-switch;
orientation-switch;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
redriver_usb_con_ss: endpoint {
remote-endpoint = <&pmic_glink_ss_in>;
};
};
port@1 {
reg = <1>;
redriver_phy_con_ss: endpoint {
remote-endpoint = <&usb_dp_qmpphy_out>;
data-lanes = <0 1 2 3>;
};
};
port@2 {
reg = <2>;
redriver_usb_con_sbu: endpoint {
remote-endpoint = <&pmic_glink_sbu_in>;
};
};
};
};
};
&mdss {
status = "okay";
};
&mdss_dp {
status = "okay";
};
&mdss_dp_out {
data-lanes = <0 1>;
remote-endpoint = <&usb_dp_qmpphy_dp_in>;
};
&mdss_dsi {
vdda-supply = <&vreg_l6b_1p2>;
status = "okay";
};
&mdss_dsi0_out {
remote-endpoint = <&lt9611_a>;
data-lanes = <0 1 2 3>;
};
&mdss_dsi_phy {
vdds-supply = <&vreg_l10c_0p88>;
status = "okay";
};
&mdss_edp {
status = "okay";
};
&mdss_edp_out {
data-lanes = <0 1 2 3>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
remote-endpoint = <&dp_connector_in>;
};
&mdss_edp_phy {
status = "okay";
};
&pcie1 {
perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
pinctrl-names = "default";
iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
<0x100 &apps_smmu 0x1c81 0x1>,
<0x208 &apps_smmu 0x1c84 0x1>,
<0x210 &apps_smmu 0x1c85 0x1>,
<0x218 &apps_smmu 0x1c86 0x1>,
<0x300 &apps_smmu 0x1c87 0x1>,
<0x400 &apps_smmu 0x1c88 0x1>,
<0x500 &apps_smmu 0x1c89 0x1>,
<0x501 &apps_smmu 0x1c90 0x1>;
status = "okay";
};
&pcie1_phy {
vdda-phy-supply = <&vreg_l10c_0p88>;
vdda-pll-supply = <&vreg_l6b_1p2>;
status = "okay";
};
&pm7325_gpios {
kypd_vol_up_n: kypd-vol-up-n-state {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <1>;
bias-pull-up;
input-enable;
};
};
&pm7325_temp_alarm {
io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
io-channel-names = "thermal";
};
&pmk8350_adc_tm {
status = "okay";
xo-therm@0 {
reg = <0>;
io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
quiet-therm@1 {
reg = <1>;
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
sdm-skin-therm@3 {
reg = <3>;
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pm8350c_pwm {
nvmem = <&pmk8350_sdam_21>,
<&pmk8350_sdam_22>;
nvmem-names = "lpg_chan_sdam",
"lut_sdam";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
led@1 {
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <3>;
linux,default-trigger = "none";
default-state = "off";
panic-indicator;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <2>;
linux,default-trigger = "none";
default-state = "off";
};
led@3 {
reg = <3>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <1>;
linux,default-trigger = "none";
default-state = "off";
};
};
&pmk8350_rtc {
status = "okay";
};
&pmk8350_vadc {
channel@3 {
reg = <PMK8350_ADC7_DIE_TEMP>;
label = "pmk8350_die_temp";
qcom,pre-scaling = <1 1>;
};
channel@44 {
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
label = "xo_therm";
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,ratiometric;
};
channel@103 {
reg = <PM7325_ADC7_DIE_TEMP>;
label = "pm7325_die_temp";
qcom,pre-scaling = <1 1>;
};
channel@144 {
reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_quiet_therm";
};
channel@146 {
reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_sdm_skin_therm";
};
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&qup_uart7_cts {
/*
* Configure a bias-bus-hold on CTS to lower power
* usage when Bluetooth is turned off. Bus hold will
* maintain a low power state regardless of whether
* the Bluetooth module drives the pin in either
* direction or leaves the pin fully unpowered.
*/
bias-bus-hold;
};
&qup_uart7_rts {
/* We'll drive RTS, so no pull */
drive-strength = <2>;
bias-disable;
};
&qup_uart7_rx {
/*
* Configure a pull-up on RX. This is needed to avoid
* garbage data when the TX pin of the Bluetooth module is
* in tri-state (module powered off or not driving the
* signal yet).
*/
bias-pull-up;
};
&qup_uart7_tx {
/* We'll drive TX, so no pull */
drive-strength = <2>;
bias-disable;
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/qcs6490/adsp.mbn";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/qcs6490/cdsp.mbn";
status = "okay";
};
&remoteproc_mpss {
firmware-name = "qcom/qcs6490/modem.mbn";
status = "okay";
};
&remoteproc_wpss {
firmware-name = "qcom/qcs6490/wpss.mbn";
status = "okay";
};
&sdhc_2 {
pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
vmmc-supply = <&vreg_l9c_2p96>;
vqmmc-supply = <&vreg_l6c_2p96>;
cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
status = "okay";
};
&tlmm {
gpio-reserved-ranges = <32 2>, /* ADSP */
<48 4>; /* NFC */
bt_en: bt-en-state {
pins = "gpio85";
function = "gpio";
output-low;
bias-disable;
};
qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
pins = "gpio28";
function = "gpio";
/*
* Configure a bias-bus-hold on CTS to lower power
* usage when Bluetooth is turned off. Bus hold will
* maintain a low power state regardless of whether
* the Bluetooth module drives the pin in either
* direction or leaves the pin fully unpowered.
*/
bias-bus-hold;
};
qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
pins = "gpio29";
function = "gpio";
/*
* Configure pull-down on RTS. As RTS is active low
* signal, pull it low to indicate the BT SoC that it
* can wakeup the system anytime from suspend state by
* pulling RX low (by sending wakeup bytes).
*/
bias-pull-down;
};
qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
pins = "gpio31";
function = "gpio";
/*
* Configure a pull-up on RX. This is needed to avoid
* garbage data when the TX pin of the Bluetooth module
* is floating which may cause spurious wakeups.
*/
bias-pull-up;
};
qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
pins = "gpio30";
function = "gpio";
/*
* Configure pull-up on TX when it isn't actively driven
* to prevent BT SoC from receiving garbage during sleep.
*/
bias-pull-up;
};
};
&uart5 {
status = "okay";
};
&uart7 {
/delete-property/ interrupts;
interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
pinctrl-1 = <&qup_uart7_sleep_cts>,
<&qup_uart7_sleep_rts>,
<&qup_uart7_sleep_tx>,
<&qup_uart7_sleep_rx>;
pinctrl-names = "default",
"sleep";
status = "okay";
bluetooth: bluetooth {
compatible = "qcom,wcn6750-bt";
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
vddaon-supply = <&vreg_pmu_aon_0p59>;
vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
max-speed = <3200000>;
};
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
};
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
&usb_1_dwc3_ss {
remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
};
&usb_1_hsphy {
vdda-pll-supply = <&vreg_l10c_0p88>;
vdda33-supply = <&vreg_l2b_3p072>;
vdda18-supply = <&vreg_l1c_1p8>;
status = "okay";
};
&usb_1_qmpphy {
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l1b_0p912>;
orientation-switch;
status = "okay";
};
&usb_dp_qmpphy_out {
remote-endpoint = <&redriver_phy_con_ss>;
};
&usb_dp_qmpphy_usb_ss_in {
remote-endpoint = <&usb_1_dwc3_ss>;
};
&usb_dp_qmpphy_dp_in {
remote-endpoint = <&mdss_dp_out>;
};
&ufs_mem_hc {
reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l7b_2p952>;
vcc-max-microamp = <800000>;
vccq-supply = <&vreg_l9b_1p2>;
vccq-max-microamp = <900000>;
vccq2-supply = <&vreg_l9b_1p2>;
vccq2-max-microamp = <900000>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l10c_0p88>;
vdda-pll-supply = <&vreg_l6b_1p2>;
status = "okay";
};
&venus {
status = "okay";
};
&wifi {
memory-region = <&wlan_fw_mem>;
qcom,calibration-variant = "Qualcomm_rb3gen2";
status = "okay";
};
/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
&edp_hot_plug_det {
function = "gpio";
bias-disable;
};
&pm7250b_gpios {
lt9611_rst_pin: lt9611-rst-state {
pins = "gpio2";
function = "normal";
output-high;
input-disable;
power-source = <0>;
};
};
&sdc2_clk {
bias-disable;
drive-strength = <16>;
};
&sdc2_cmd {
bias-pull-up;
drive-strength = <10>;
};
&sdc2_data {
bias-pull-up;
drive-strength = <10>;
};
&tlmm {
lt9611_irq_pin: lt9611-irq-state {
pins = "gpio24";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
pcie1_reset_n: pcie1-reset-n-state {
pins = "gpio2";
function = "gpio";
drive-strength = <16>;
output-low;
bias-disable;
};
pcie1_wake_n: pcie1-wake-n-state {
pins = "gpio3";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
sd_cd: sd-cd-state {
pins = "gpio91";
function = "gpio";
bias-pull-up;
};
};
&lpass_audiocc {
compatible = "qcom,qcm6490-lpassaudiocc";
/delete-property/ power-domains;
};
Reference in New Issue View Git Blame Copy Permalink