The Output Processing Engine (OPE) is one of the AHUB client. It has
PEQ (Parametric Equalizer) and MBDRC (Multi Band Dynamic Range Compressor)
sub blocks for data processing. The PEQ block gets samples from the MBDRC
block.
This patch registers OPE driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes OPE interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1654238172-16293-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card_jack_new() allowed to create jack kcontrol without pins,
but did not create kcontrols. The jack would not have kcontrols if pins
were not going to be added.
This renames the old snd_soc_card_jack_new() to
snd_soc_card_jack_new_pins() for use when pins are provided or will be
added later. The new snd_soc_card_jack_new() appropriately creates a
jack for use without pins and adds a kcontrol.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/tegra/tegra186_asrc.c:90:12: error: ‘tegra186_asrc_runtime_resume’ defined but not used [-Werror=unused-function]
static int tegra186_asrc_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/tegra/tegra186_asrc.c:80:12: error: ‘tegra186_asrc_runtime_suspend’ defined but not used [-Werror=unused-function]
static int tegra186_asrc_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark these functions as __maybe_unused to avoid this kind of warning.
Fixes: a2df8c2d5b ("ASoC: tegra: Add Tegra186 based ASRC driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220411020908.580-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add AHUB routes for ASRC module. The ASRC module can be plugged into audio
path as per the need. The routing controls can be used to setup the audio
path with ASRC similar to the already existing routes. The routes are added
to Tegra186 and later Tegra SoCs where ASRC module is present.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1648735412-32220-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency
of the input signal from one frequency to another. It can handle over a
wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
ASRC has two modes of operation. One where ratio can be programmed in SW
and the other where it gets the information from ratio estimator module.
The latter mode above can help address the cases where the sample rate is
not known at the stream set up time or is potentially time varying.
In addition, the ratio between input and output sample rate can be any
arbitrary number and the input and output clocks could be derived from
asynchronous clocks.
This patch registers ASRC driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes ASRC interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1648735412-32220-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the read-only const array rates on the stack but
instead it static. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220214213223.65780-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The register offsets of switches connecting various AHUB internal
modules have changed from previous chip. Address this variation by
making use of Tegra234 based compatible.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1643373476-8538-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support new nvidia,fixed-parent-rate device-tree property which instructs
I2S that board wants parent clock rate to stay at a fixed rate. This allows
to play audio over S/PDIF and I2S simultaneously. The root of the problem
is that audio components on Tegra share the same audio PLL, and thus, only
a subset of rates can be supported if we want to play audio simultaneously.
Filter out audio rates that don't match parent clock rate if device-tree
has the nvidia,fixed-parent-rate property.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-14-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SPDIF and other SoC components share audio PLL on Tegra, thus only one
component may set the desired base clock rate. This creates problem for
HDMI audio because it uses SPDIF and audio may not work if SPDIF's clock
doesn't exactly match standard audio rate since some receivers may reject
audio in that case. Filter out audio rates which SPDIF output can't
support, assuming that other components won't change rate at runtime.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-13-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support system suspend by enforcing runtime PM suspend/resume.
Now there is no doubt that h/w is indeed stopped during suspend
and that h/w state will be properly restored after resume.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-12-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reset S/PDIF controller on runtime PM suspend/resume to ensure that we
always have a consistent hardware state.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-11-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use resource-managed helpers to make code cleaner. Driver's remove callback
isn't needed anymore since driver is completely resource-managed now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-10-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Clean up whitespaces, defines and variables.
- Remove obsolete code.
- Adhere to upstream coding style.
- Don't override returned error code.
- Replace pr_err with dev_err.
No functional changes are made by this patch. This is a minor code's
refactoring that will ease further maintenance of the driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-9-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra20 S/PDIF driver was added in a pre-DT era and was never used since
that time. Revive driver by adding device-tree support.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-8-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FIFO trigger level must be not less than the size of DMA burst, otherwise
audio will be played x4 faster that it should be because part of the DMA
data will be dropped on FIFO input buffer overflow.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211204143725.31646-6-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tag for dmaengine slave_id removal topic branch which should be merged
into v5.17
-----BEGIN PGP SIGNATURE-----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=Mpf8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmG8cOYACgkQJNaLcl1U
h9D+Wgf+PdDgmb/kBATZNCfSa13y0A18EVC0ETrCn7EBQt6UbyU5Zx/rVOe8Sjw+
d/kuqc0WCV3UrSdnZHh1pYpn/eqRh6KJCufMJFQiYAEwjJi5TQ5eYDHf7sd0oEI8
NOkTJbl26UImAsnsHcC35moHyTH2U8sKoEeva5i/MIXxBpn+3cIWnmjUi7ZUEzLu
qmZDPEYHVRklcbFEWI7oehb68hJlTHz2PY9ARM+sTUica9owlTiaGRD2WX+Wtc5G
fx0rWoIiFUGnW2qoRBX7yNOBKvzmT6m+pqPMQ/LAjE1Xa4Cb0e87fm33b1QFhuEk
CYFHAAzKem/3GskXlR57fY4p8CvJmQ==
=6fXc
-----END PGP SIGNATURE-----
Merge tag 'dmaengine_topic_slave_id_removal_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine into v4_20211204_digetx_support_hdmi_audio_on_nvidia_tegra20
dmaengine_topic_slave_id_removal_5.17
Tag for dmaengine slave_id removal topic branch which should be merged
into v5.17
The DMA resource is never set up anywhere, and passing this as slave_id
has not been the proper procedure in a long time.
As a preparation for removing all slave_id references from the ALSA code,
remove this one.
According to Dmitry Osipenko, this driver has never been used and
the mechanism for configuring DMA would not work as it is implemented,
so this part will get rewritten when the driver gets put into use
again in the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-2-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
UCM of Acer Chromebook (Nyan) uses a different name for the headphones
jack. The name was changed during unification of the machine drivers and
UCM fails now to load because of that. Restore the old jack name.
Cc: <stable@vger.kernel.org>
Fixes: cc8f70f ("ASoC: tegra: Unify ASoC machine drivers")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211211231146.6137-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
UCM of Acer Chromebook (Nyan) uses DAPM switches of headphones and mic
jack. These switches were lost by accident during unification of the
machine drivers, restore them.
Cc: <stable@vger.kernel.org>
Fixes: cc8f70f ("ASoC: tegra: Unify ASoC machine drivers")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211211231146.6137-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MVC module has a per channel control bit, based on which it decides
to apply channel specific volume/mute settings. When per channel control
bit is enabled (which is the default HW configuration), all MVC channel
volume/mute can be independently controlled. If the control is disabled,
channel-0 volume/mute setting is applied by HW to all remaining channels.
Thus add support to leverage this HW feature by exposing master controls
for volume/mute.
With this, now there are per channel and master volume/mute controls.
Users need to just use controls which are suitable for their applications.
The per channel control enable/disable is mananged in driver and hidden
from users, so that they need to just worry about respective volume/mute
controls.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1638278605-28225-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for ADX device
happens after the parent device (AHUB). This seems to cause
suspend failure on Jetson TX2 platform. Also there is no use
of having late system sleep specifically for ADX device. Fix
the order by using normal system sleep.
Fixes: a99ab6f395 ("ASoC: tegra: Add Tegra210 based ADX driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-7-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for AMX device
happens after the parent device (AHUB). This seems to cause
suspend failure on Jetson TX2 platform. Also there is no use
of having late system sleep specifically for AMX device. Fix
the order by using normal system sleep.
Fixes: 77f7df346c ("ASoC: tegra: Add Tegra210 based AMX driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-6-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for Mixer device
happens after the parent device (AHUB). This seems to cause
suspend failure on Jetson TX2 platform. Also there is no use
of having late system sleep specifically for Mixer device. Fix
the order by using normal system sleep.
Fixes: 05bb3d5ec6 ("ASoC: tegra: Add Tegra210 based Mixer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-5-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for MVC device
happens after the parent device (AHUB). This seems to cause
suspend failure on Jetson TX2 platform. Also there is no use
of having late system sleep specifically for MVC device. Fix
the order by using normal system sleep.
Fixes: e539891f96 ("ASoC: tegra: Add Tegra210 based MVC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for SFC device
happens after the parent device (AHUB). This seems to cause
suspend failure on Jetson TX2 platform. Also there is no use
of having late system sleep specifically for SFC device. Fix
the order by using normal system sleep.
Fixes: b2f74ec53a ("ASoC: tegra: Add Tegra210 based SFC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After successful application of volume/mute settings via mixer control
put calls, the control returns without balancing the runtime PM count.
This makes device to be always runtime active. Fix this by allowing
control to reach pm_runtime_put() call.
Fixes: e539891f96 ("ASoC: tegra: Add Tegra210 based MVC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Filter
out duplicate updates in Mixer driver.
Fixes: 05bb3d5ec6 ("ASoC: tegra: Add Tegra210 based Mixer driver")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-17-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Filter
out duplicate updates in ADX driver.
Fixes: a99ab6f395 ("ASoC: tegra: Add Tegra210 based ADX driver")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-16-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Filter
out duplicate updates in AMX driver.
Fixes: 77f7df346c ("ASoC: tegra: Add Tegra210 based AMX driver")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-15-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Filter
out duplicate updates in SFC driver.
Fixes: b2f74ec53a ("ASoC: tegra: Add Tegra210 based SFC driver")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-14-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Filter
out duplicate updates in MVC driver.
Fixes: e539891f96 ("ASoC: tegra: Add Tegra210 based MVC driver")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-13-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the AHUB driver accordingly.
Fixes: 16e1bcc2ca ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-12-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the DSPK driver accordingly.
Fixes: 327ef64702 ("ASoC: tegra: Add Tegra186 based DSPK driver")
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-11-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the DMIC driver accordingly.
Fixes: 8c8ff982e9 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-10-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the I2S driver accordingly.
Fixes: c0bfa98349 ("ASoC: tegra: Add Tegra210 based I2S driver")
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-9-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the ADMAIF driver accordingly.
Fixes: f74028e159 ("ASoC: tegra: Add Tegra210 based ADMAIF driver")
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-8-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: e539891f96 ("ASoC: tegra: Add Tegra210 based MVC driver")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-7-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: b2f74ec53a ("ASoC: tegra: Add Tegra210 based SFC driver")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-6-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: 327ef64702 ("ASoC: tegra: Add Tegra186 based DSPK driver")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-5-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: 8c8ff982e9 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: c0bfa98349 ("ASoC: tegra: Add Tegra210 based I2S driver")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: f74028e159 ("ASoC: tegra: Add Tegra210 based ADMAIF driver")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The default card name for Trimslice device should be "tegra-trimslice".
It got lost by accident during unification of machine sound drivers,
fix it.
Cc: <stable@vger.kernel.org>
Fixes: cc8f70f560 ("ASoC: tegra: Unify ASoC machine drivers")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211024192853.21957-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device-tree of AC97 codecs need to be parsed differently from I2S
codecs, plus codec device may need to be created. This was missed by the
patch that unified machine drivers into a single driver, fix it. It should
restore audio on Toradex Colibri board.
Cc: <stable@vger.kernel.org>
Fixes: cc8f70f560 ("ASoC: tegra: Unify ASoC machine drivers")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211024192853.21957-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct tegra_machine_snd_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211001114517.6752-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of these is to assign their address to the ops field in
the snd_soc_dai_driver struct, which is a pointer to const. Make them
const to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20210922205438.34519-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Mixer supports mixing of up to ten 7.1 audio input streams and
generate five outputs (each of which can be any combination of the
ten input streams)
This patch registers Mixer driver with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device.
The DAI driver exposes Mixer interfaces, which can be used to connect
different components in the ASoC layer. Makefile and Kconfig support
is added to allow build the driver. It can be enabled in the DT via
"nvidia,tegra210-amixer" compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-11-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Audio Demultiplexer (ADX) block takes an input stream with up to
16 channels and demultiplexes it into four output streams of up to 16
channels each. A byte RAM helps to form output frames by any combination
of bytes from the input frame. Its design is identical to that of byte
RAM in the AMX except that the data flow direction is reversed.
This patch registers ADX driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes ADX interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver. It can be enabled in the DT via "nvidia,tegra210-adx"
compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Audio Multiplexer (AMX) block can multiplex up to four input streams
each of which can have maximum 16 channels and generate an output stream
with maximum 16 channels. A byte RAM helps to form an output frame by
any combination of bytes from the input frames.
This patch registers AMX driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes AMX interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver. It can be enabled in the DT via "nvidia,tegra210-amx" for
Tegra210 and Tegra186. For Tegra194 and later, "nvidia,tegra194-amx" can
be used.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-9-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Sampling Frequency Converter (SFC) converts the sampling frequency
of the input signal from one frequency to another. It supports sampling
frequency conversions of streams of up to two channels (stereo).
This patch registers SFC driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes SFC interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver. It can be enabled in the DT via "nvidia,tegra210-sfc"
compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-8-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Master Volume Control (MVC) provides gain or attenuation to a digital
signal path. It can be used in input or output signal path for per-stream
volume control or it can be used as master volume control. The MVC block
has one input and one output. The input digital stream can be mono or
multi-channel (up to 7.1 channels) stream. An independent mute control is
also included in the MVC block.
This patch registers MVC driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes MVC interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver. It can be enabled in the DT via "nvidia,tegra210-mvc"
compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-7-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add routing support for following modules of AHUB:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
These modules can be plugged into audio path as per the need using
routing controls similar to the already existing routes to I/O modules
such as I2S, DMIC and DSPK.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-6-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.
- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmEsxhYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Py1B/0dVvB5iLx7t7Vp3EbxIbAQ/4URpmfV
A/yIWY6fii6vhVsdsqU+8FN7D5m5ZpVUx+3kH//oCsPL7VLem3sjh64lge1lQz4A
9G9FU63nSCY8X0dL4cfZTNEd+FYrCHZDqU8y7oJg+v3U7D42MVLhTwySaCuP6W56
KZhxOUIuyfIrhmkfBEAUCA6jyPSbVAy7Aw9B5WhJhX07yw0vToxnycbTnjwMzMYn
3Bvfycyg9pqpxAdCuJVPVs3S8+CM5/+QjKb0J6vy1Zuw49jNSUdkvuyRWXZsAoAF
zepXWEKXvclKNZDR0N1AO4H+9fUeSvkc/IX7XEHZ0Zk8w2eMico0ceAz
=BHW1
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.15
Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.
- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.
As the standard buffer allocation helper supports WC pages now, we can
convert imx-pcm-rpmsg driver to use that. This allows us to remove
lots of superfluous code.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802072815.13551-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DMA memory is currently allocated for the soundcard device, which is a
virtual device added for the sole purpose of "stitching" together the
audio device. It is not a real device and therefore doesn't have a DMA
mask or a description of the path to and from memory of accesses.
Memory accesses really originate from the ADMA controller that provides
the DMA channels used by the PCM component. However, since the DMA
memory is allocated up-front and the DMA channels aren't known at that
point, there is no way of knowing the DMA channel provider at allocation
time.
The next best physical device in the memory path is the ADMAIF. Use it
as the device to allocate DMA memory to. iommus and interconnects device
tree properties can thus be added to the ADMAIF device tree node to
describe the memory access path for audio.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210708103432.1690385-2-thierry.reding@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There no users left of the utils other than the new common machine driver.
Squash the utils into the common machine driver in order to simplify code.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210529154649.25936-5-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Specify components string for each card of each supported device. It's
a free form string that describes audio hardware configuration. This
information is useful for ALSA UCM rules. It allows to generalize UCM
rules, potentially removing a need to add new UCM rule for each device.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210529154649.25936-4-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Squash all machine drivers into a single-universal one. This reduces
code duplication, eases addition of a new drivers and upgrades older
code to a modern Linux kernel APIs.
Suggested-by: Jonathan Hunter <jonathanh@nvidia.com>
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210529154649.25936-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver_name="tegra" is now required by the newer ALSA UCMs, otherwise
Tegra UCMs don't match by the path/name.
All Tegra machine drivers are specifying the card's name, but it has no
effect if model name is specified in the device-tree since it overrides
the card's name. We need to set the driver_name to "tegra" in order to
get a usable lookup path for the updated ALSA UCMs. The new UCM lookup
path has a form of driver_name/card_name.
The old lookup paths that are based on driver module name continue to
work as before. Note that UCM matching never worked for Tegra ASoC drivers
if they were compiled as built-in, this is fixed by supporting the new
naming scheme.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210529154649.25936-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A reorganization of the driver source led to two of them causing
a compile time warning in some configurations:
tegra/tegra20_spdif.c:36:12: error: 'tegra20_spdif_runtime_resume' defined but not used [-Werror=unused-function]
36 | static int tegra20_spdif_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra20_spdif.c:27:12: error: 'tegra20_spdif_runtime_suspend' defined but not used [-Werror=unused-function]
27 | static int tegra20_spdif_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra30_ahub.c:64:12: error: 'tegra30_ahub_runtime_resume' defined but not used [-Werror=unused-function]
64 | static int tegra30_ahub_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
tegra/tegra30_ahub.c:43:12: error: 'tegra30_ahub_runtime_suspend' defined but not used [-Werror=unused-function]
43 | static int tegra30_ahub_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark these functions as __maybe_unused to avoid this kind of warning.
Fixes: b5571449e6 ("ASoC: tegra30: ahub: Remove handing of disabled runtime PM")
Fixes: c53b396f0d ("ASoC: tegra20: spdif: Remove handing of disabled runtime PM")
Fixes: 80ec4a4cb3 ("ASoC: tegra20: i2s: Remove handing of disabled runtime PM")
Fixes: b5f6f781fc ("ASoC: tegra30: i2s: Remove handing of disabled runtime PM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210422133418.1757893-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2 can reuse audio_graph_remove() / asoc_simple_remove().
This patch moves it to simple-card-utils.c.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2df3uby.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2 can reuse audio_graph_card_probe().
This patch moves it to simple-card-utils.c.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgxv3uc4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/tegra/tegra20_das.c:64:60: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
reg = otherdap << TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_P |
^
sound/soc/tegra/tegra20_das.c:65:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
!!sdata2rx << TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_P |
^
sound/soc/tegra/tegra20_das.c:66:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
!!sdata1rx << TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_P |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210326215927.936377-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoC sound core will generate a driver name by normalizing the card
name. However, most of the time that name does not tell anything about
the driver and is therefore useless for this purpose.
Make the driver name more useful by setting it explicitly during card
initialization.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210330180657.1867971-1-thierry.reding@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Runtime PM is always available on Tegra since commit 40b2bb1b13
("ARM: tegra: enforce PM requirement"), hence there is no need to
handle the case of a disabled RPM by Tegra drivers. Remove handing
of a disabled runtime PM from Tegra30 AHUB driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-18-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra30 AHUB driver always syncs hardware state on a runtime PM resume,
hence there is no needed to re-sync the state on system resume. Replace
the suspend-resume callbacks with a generic helpers which ensure that
AHUB is suspended using RPM callbacks across system suspend-resume.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-17-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra30 AHUB uses global variable that is never reset by the driver on
a probe failure and on driver removal, meaning that driver will never try
to re-probe and can't be unbound. Make driver to reset the variable.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-16-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Runtime PM is always available on Tegra since commit 40b2bb1b13
("ARM: tegra: enforce PM requirement"), hence there is no need to
handle the case of a disabled RPM by Tegra drivers. Remove handing
of a disabled runtime PM from Tegra30 I2S driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-15-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra30 I2S driver has a wrong driver removal order, which should be
opposite to the registration order, but it's not. In particular the
runtime PM is disabled in a wrong order. Fix the order.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-13-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Runtime PM is always available on Tegra since commit 40b2bb1b13
("ARM: tegra: enforce PM requirement"), hence there is no need to
handle the case of a disabled RPM by Tegra drivers. Remove handing
of a disabled runtime PM from Tegra20 I2S driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-12-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra20 I2S driver has a wrong driver removal order, which should be
opposite to the registration order, but it's not. In particular the
runtime PM is disabled in a wrong order. Fix the order.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-10-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add system level suspend-resume callbacks in order to ensure that I2S
is gated before system is suspended. This puts Tegra20 I2S driver on
par with the Tegra30 I2S driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-9-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Runtime PM is always available on Tegra since commit 40b2bb1b13
("ARM: tegra: enforce PM requirement"), hence there is no need to
handle the case of a disabled RPM by Tegra drivers. Remove handing
of a disabled runtime PM from Tegra20 SPDIF driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-8-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra20 SPDIF driver has a wrong driver removal order, which should be
opposite to the registration order, but it's not. In particular the
runtime PM is disabled in a wrong order. Fix the order.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-7-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra30 I2S driver syncs regmap cache only on resume from system suspend,
but hardware is reset across the runtime suspend because RPM of the parent
AHUB driver resets the I2S hardware, hence h/w state is lost after each
RPM resume. The problem isn't visible because hardware happens to be fully
reprogrammed after each RPM resume. Move hardware syncing to RPM resume in
order to restore h/w state properly.
Fixes: ed9ce1ed22 ("ASoC: tegra: ahub: Reset hardware properly")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-4-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The I2S reset may be asserted at a boot time, in particular this is the
case on Tegra20 AC100 netbook. Tegra20 I2S driver doesn't manage the
reset control and currently it happens to work because reset is implicitly
deasserted by the tegra-clk driver when I2S clock is enabled. The I2S
permanently stays in a reset once tegra-clk is fixed to not touch the
resets, which it shouldn't be doing. Add reset control to the Tegra20
I2S driver.
Note that I2S reset was always specified in Tegra20 device-tree, hence
DTB ABI changes aren't required.
Tested-by: Paul Fertser <fercerpav@gmail.com> # T20 AC100
Reported-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra20 AC97 driver doesn't manage the AC97 controller reset, relying on
implicit deassertion of the reset by tegra-clk driver, which needs to be
fixed since this behaviour is unacceptable by other Tegra drivers. Add
explicit reset control to the Tegra20 AC97 driver.
Note that AC97 reset was always specified in Tegra20 device-tree, hence
DTB ABI changes aren't required.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is cleanup required, related to release of phandles, during driver
removal and hence point remove callback to audio_graph_remove().
Fixes: 202e2f7745 ("ASoC: tegra: Add audio graph based card driver")
Depends-on: "ASoC: audio-graph: Rename functions needed for export"
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1612719418-5858-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following functions are renamed for a better global visibility.
graph_card_probe() --> audio_graph_card_probe()
graph_parse_of() --> audio_graph_parse_of()
graph_remove() --> audio_graph_remove() [exported as well]
The references of these are updated in audio graph and Tegra audio
graph card drivers.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1612719418-5858-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Graph Card based Tegra driver is only useful on NVIDIA Tegra SoCs.
Hence add a dependency on SND_SOC_TEGRA, to prevent asking the user
about this driver when configuring a kernel without Tegra sound support.
Wrap all Tegra sound config options inside a big if/endif block, instead
of just adding the dependency to the single config option that does not
have it yet, to preventing similar future mistakes.
Fixes: 202e2f7745 ("ASoC: tegra: Add audio graph based card driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20210129125915.2652952-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Assert hardware resets before clocks are enabled and then de-assert them
after clocks are enabled. This brings hardware into a predictable state.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Dmitry Osipenko <digetx@gmail.com> # Nexus7 T30 audio works
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-7-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AHUB driver misses D_AUDIO and APBIF resets. CPU hangs on trying to
access hardware if resets aren't de-asserted. This problem is currently
masked by the tegra-clk driver which implicitly de-asserts the resets when
the corresponding clocks are enabled. Soon the implicit de-assertion will
be gone from the tegra-clk driver, thus we need to fix the AHUB driver.
Add the missing resets to the driver.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Dmitry Osipenko <digetx@gmail.com> # Nexus7 T30 audio works
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-5-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series adds audio graph based sound card support for Tegra210
platforms like Jetson-TX1 an Jetson-Nano. The following preparatory
audio graph enhancement series is already merged.
* https://patchwork.kernel.org/project/alsa-devel/list/?series=375629&state=*
Following are the summary of changes:
* Add graph/audio-graph based schemas or schema updates for Tegra210
component and machine drivers.
* Add Tegra audio graph machine driver.
* Add required DT support for Jetson-TX1/Nano.
This work is based on earlier discussion of DPCM usage for Tegra
and simple card driver updates.
* https://lkml.org/lkml/2020/4/30/519
* https://lkml.org/lkml/2020/6/27/4
Original v6 series was sent about 6-7 weeks back. The dependency commit,
https://lore.kernel.org/alsa-devel/1610948585-16286-1-git-send-email-spujar@nvidia.com/
is now merged. Resending this now to appear in the top of the mail list.
Changelog
=========
v5 -> v6
--------
* Added ports or port description in YAML docs for Tegra AHUB
devices and graph card in patch 1/6 and 2/6. Reference of
audio-graph-port.yaml is used for AHUB devices.
* Dropped redundant NULL check return for of_device_get_match_data()
in patch 3/6.
* Added 'Reviewed-by' tag from Jon Hunter.
* No changes in remaining patches.
v4 -> v5
--------
* Audio graph related changes were sent in separate v5 series as
mentioned above and are dropped from current series.
* Graph and audio graph doc patches are dropped from this series
and are sent separately as mentioned above.
* Minor change with phandle label for TX1 and Nano platform DT files.
* No changes in other patches.
v3 -> v4
--------
* Added new patches to convert graph.txt and audio-graph-card.txt
to corresponding json-schema files. Later these references
are used in Tegra audio graph schema.
* AHUB component binding docs are updated to reflect the usage
of ports/port/endpoint
* More common stuff is moved into graph_parse_of() and this is
used by both generic and Tegra audio graph.
* DT binding for Tegra audio graph is updated to included "ports { }"
* As per the suggestion 'void *data' member is dropped from
'asoc_simple_priv' and instead container method is used to
maintain required custom data internal to Tegra audio graph.
v2 -> v3
--------
* Dropped new compatible addition in generic graph driver
after reviewing it with Morimoto-san. Instead added Tegra
audio graph driver and new compatibles are added in the same.
* Added new patches to expose new members for customization
in audio graph driver.
* Added new patch for Tegra audio graph driver and related
documentation.
* Minor change in below commit where mutex version of helper is used
"ASoC: audio-graph: Identify 'no_pcm' DAI links for DPCM"
* DT binding is updated to use the newly exposed compatibles
* No changes in other patches
v1 -> v2
--------
* Re-organized ports/endpoints description for ADMAIF and XBAR.
Updated DT patches accordingly.
* After above change, multiple Codec endpoint support is not
required and hence dropped for now. This will be considered
separately if at all required in future.
* Re-ordered patches in the series.
Sameer Pujar (6):
ASoC: dt-bindings: tegra: Add graph bindings
ASoC: dt-bindings: tegra: Add json-schema for Tegra audio graph card
ASoC: tegra: Add audio graph based card driver
arm64: defconfig: Enable Tegra audio graph card driver
arm64: tegra: Audio graph header for Tegra210
arm64: tegra: Audio graph sound card for Jetson Nano and TX1
.../sound/nvidia,tegra-audio-graph-card.yaml | 187 +++++++++++++++
.../bindings/sound/nvidia,tegra186-dspk.yaml | 18 +-
.../bindings/sound/nvidia,tegra210-admaif.yaml | 13 +-
.../bindings/sound/nvidia,tegra210-ahub.yaml | 13 +-
.../bindings/sound/nvidia,tegra210-dmic.yaml | 18 +-
.../bindings/sound/nvidia,tegra210-i2s.yaml | 18 +-
.../boot/dts/nvidia/tegra210-audio-graph.dtsi | 153 ++++++++++++
arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 262 +++++++++++++++++++++
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 146 ++++++++++++
arch/arm64/configs/defconfig | 1 +
sound/soc/tegra/Kconfig | 9 +
sound/soc/tegra/Makefile | 2 +
sound/soc/tegra/tegra_audio_graph_card.c | 251 ++++++++++++++++++++
13 files changed, 1085 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi
create mode 100644 sound/soc/tegra/tegra_audio_graph_card.c
--
2.7.4
Add Tegra audio machine driver which is based on generic audio graph card
driver. It re-uses most of the common stuff from audio graph driver and
uses the same DT binding. Required Tegra specific customizations are done
in the driver and additional DT bindings are required for clock handling.
Details on the customizations done:
- Update PLL rates at runtime: Tegra HW supports multiple sample rates
(multiples of 8x and 11.025x) and both of these groups require different
PLL rates. Hence there is a requirement to update this at runtime.
This is achieved by providing a custom 'snd_soc_ops' and in hw_param()
callback PLL rate is updated as per the sample rate.
- Internal structure 'tegra_audio_graph_data' is used to maintain clock
handles of PLL.
- The 'force_dpcm' flag is set to use DPCM for all DAI links.
- The 'component_chaining' flag is set to use DPCM with component model.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/1611048496-24650-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC tegra PCM code still has explicit calls of dma_set_mask() and
dma_set_coherent_mask().
Let's simplify with dma_set_mask_and_coherent().
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210114133337.1039-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Deferred probe is an expected return value for snd_soc_register_card().
Given that the driver deals with it properly, there's no need to output
a warning that may potentially confuse users.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20201111103245.152189-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix trivial compile warnings wrt unused functions by adding
__maybe_unused prefix:
sound/soc/tegra/tegra210_i2s.c:167:12: warning: 'tegra210_i2s_runtime_suspend' defined but not used [-Wunused-function]
sound/soc/tegra/tegra210_i2s.c:179:12: warning: 'tegra210_i2s_runtime_resume' defined but not used [-Wunused-function]
Fixes: c0bfa98349 ("ASoC: tegra: Add Tegra210 based I2S driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803141850.23713-6-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix trivial compile warnings wrt unused functions by adding
__maybe_unused prefix:
sound/soc/tegra/tegra210_dmic.c:43:12: warning: 'tegra210_dmic_runtime_suspend' defined but not used [-Wunused-function]
sound/soc/tegra/tegra210_dmic.c:55:12: warning: 'tegra210_dmic_runtime_resume' defined but not used [-Wunused-function]
Fixes: 8c8ff982e9 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803141850.23713-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix trivial compile warnings wrt unused functions by adding
__maybe_unused prefix:
sound/soc/tegra/tegra210_ahub.c:567:12: warning: 'tegra_ahub_runtime_suspend' defined but not used [-Wunused-function]
sound/soc/tegra/tegra210_ahub.c:579:12: warning: 'tegra_ahub_runtime_resume' defined but not used [-Wunused-function]
Fixes: 16e1bcc2ca ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803141850.23713-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix trivial compile warnings wrt unused functions by adding
__maybe_unused prefix:
sound/soc/tegra/tegra210_admaif.c:232:12: warning: 'tegra_admaif_runtime_resume' defined but not used [-Wunused-function]
sound/soc/tegra/tegra210_ahub.c:567:12: warning: 'tegra_ahub_runtime_suspend' defined but not used [-Wunused-function]
Fixes: f74028e159 ("ASoC: tegra: Add Tegra210 based ADMAIF driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803141850.23713-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix trivial compile warnings wrt unused functions by adding
__maybe_unused prefix:
sound/soc/tegra/tegra186_dspk.c:74:12: warning: 'tegra186_dspk_runtime_suspend' defined but not used [-Wunused-function]
sound/soc/tegra/tegra186_dspk.c:86:12: warning: 'tegra186_dspk_runtime_resume' defined but not used [-Wunused-function]
Fixes: 327ef64702 ("ASoC: tegra: Add Tegra186 based DSPK driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803141850.23713-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Build errors are seen on 32-bit platforms because of a plain 64-by-32
division. For example, following build erros were reported.
"ERROR: modpost: "__udivdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko]
undefined!"
"ERROR: modpost: "__divdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko]
undefined!"
This can be fixed by using div_u64() helper from 'math64.h' header.
Fixes: 8c8ff982e9 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595492011-2411-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Overview
========
Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio
Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio
pre-processing and post-processing. It also includes a programmable full
crossbar for routing audio data across these accelerators.
This series exposes some of these below mentioned HW devices as ASoC
components for Tegra platforms from Tegra210 onwards.
* ADMAIF : The interface between ADMA and AHUB
* XBAR : Crossbar for routing audio samples across various modules
* I2S : Inter-IC Sound Controller
* DMIC : Digital Microphone
* DSPK : Digital Speaker
Following is the summary of current series.
* Add YAML DT binding documentation for above mentioned modules.
* Helper function for ACIF programming is exposed for Tegra210 and later.
* Add ASoC driver components for each of the above modules.
* Build ACONNECT and ADMA drivers which are essential to realize audio
use case.
* Add DT entries for above components for Tegra210, Tegra186 and
Tegra194.
As per the suggestion in [0] audio graph based sound card support
is pushed in a separate series.
[0] https://lkml.org/lkml/2020/6/27/4
Changelog
=========
v4 -> v5
--------
* Common changes
- simple-card driver changes are dropped. Changes are migrated to audio
graph card and are moved to a separate series as suggested.
- '#sound-dai-cells' property is not needed for planned audio graph card
Hence dropped from documentation and related DT binding of component
drivers.
- CIF and DAP DAIs are added for I/O drivers (DMIC, DSPK, I2S) to
represent DAI links using audio graph card. Similary DAIs are added in
AHUB driver to describe endpoints in audio crossbar. Routing is updated
to reflect the same in drivers.
v3 -> v4
--------
* [1/23] "ASoC: dt-bindings: tegra: Add DT bindings for Tegra210"
- Removed multiple examples and retained one example per doc
- Fixed as per inputs on the previous series
- Tested bindings with 'make dt_binding_check/dtbs_check'
* [2/23] "ASoC: tegra: Add support for CIF programming"
- No change
* Common changes (for patch [3/10] to [7/10])
- Mixer control overrides, for PCM parameters (rate, channel, bits),
in each driver are dropped.
- Updated routing as per DPCM usage
- Minor changes related to formatting
* New changes (patch [8/23] to [18/23] and patch [23/23])
- Based on discussions in following threads DPCM is used for Tegra Audio.
https://lkml.org/lkml/2020/2/20/91https://lkml.org/lkml/2020/4/30/519
- The simple-card driver is used for Tegra Audio and accordingly
some enhancements are made in simple-card and core drivers.
- Patch [8/23] to [18/23] are related to simple-card and core changes.
- Patch [23/23] adds sound card support to realize complete audio path.
This is based on simple-card driver with proposed enhancements.
- Re-ordered patches depending on above
v2 -> v3
--------
* [1/10] "dt-bindings: sound: tegra: add DT binding for AHUB
- Updated licence
- Removed redundancy w.r.t items/const/enum
- Added constraints wherever needed with "pattern" property
* [2/10] "ASoC: tegra: add support for CIF programming"
- Removed tegra_cif.c
- Instead added inline helper function in tegra_cif.h
* common changes (for patch [3/10] to [7/10])
- Replace LATE system calls with Normal sleep
- Remove explicit RPM suspend in driver remove() call
- Use devm_kzalloc() instead of devm_kcalloc() for single element
- Replace 'ret' with 'err' for better reading
- Consistent error printing style across drivers
- Minor formating fixes
* [8/10] "arm64: tegra: add AHUB components for few Tegra chips"
- no change
* [9/10] "arm64: tegra: enable AHUB modules for few Tegra chips"
- no change
* [10/10] "arm64: defconfig: enable AHUB components for Tegra210 and later"
(New patch)
- Enables ACONNECT and AHUB components. With this AHUB and components are
registered with ASoC core.
v1 -> v2
--------
* [1/9] "dt-bindings: sound: tegra: add DT binding for AHUB"
- no changes
* [2/9] "ASoC: tegra: add support for CIF programming"
- removed CIF programming changes for legacy chips.
- this patch now exposes helper function for CIF programming,
which can be used on Tegra210 later.
- later tegra_cif.c can be extended for legacy chips as well.
- updated commit message accordingly
* [3/9] "ASoC: tegra: add Tegra210 based DMIC driver"
- removed unnecessary initialization of 'ret' in probe()
* [4/9] "ASoC: tegra: add Tegra210 based I2S driver"
- removed unnecessary initialization of 'ret' in probe()
- fixed indentation
- added consistent bracing for if-else clauses
- updated 'rx_fifo_th' type to 'unsigned int'
- used BIT() macro for defines like '1 << {x}' in tegra210_i2s.h
* [5/9] "ASoC: tegra: add Tegra210 based AHUB driver"
- used of_device_get_match_data() to get 'soc_data' and removed
explicit of_match_device()
- used devm_platform_ioremap_resource() and removed explicit
platform_get_resource()
- fixed indentation for devm_snd_soc_register_component()
- updated commit message
- updated commit message to reflect compatible binding for Tegra186 and
Tegra194.
* [6/9] "ASoC: tegra: add Tegra186 based DSPK driver"
- removed unnecessary initialization of 'ret' in probe()
- updated 'max_th' to 'unsigned int'
- shortened lengthy macro names to avoid wrapping in
tegra186_dspk_wr_reg() and to be consistent
* [7/9] "ASoC: tegra: add Tegra210 based ADMAIF driver"
- used of_device_get_match_data() and removed explicit of_match_device()
- used BIT() macro for defines like '1 << {x}' in tegra210_admaif.h
- updated commit message to reflect compatible binding for Tegra186 and
Tegra194.
* [8/9] "arm64: tegra: add AHUB components for few Tegra chips"
- no change
* [9/9] "arm64: tegra: enable AHUB modules for few Tegra chips"
- no change
* common changes for patch [3/9] to [7/9]
- sorted headers in alphabetical order
- moved MODULE_DEVICE_TABLE() right below *_of_match table
- removed macro DRV_NAME
- removed explicit 'owner' field from platform_driver structure
- added 'const' to snd_soc_dai_ops structure
Sameer Pujar (11):
ASoC: dt-bindings: tegra: Add DT bindings for Tegra210
ASoC: tegra: Add support for CIF programming
ASoC: tegra: Add Tegra210 based DMIC driver
ASoC: tegra: Add Tegra210 based I2S driver
ASoC: tegra: Add Tegra210 based AHUB driver
ASoC: tegra: Add Tegra186 based DSPK driver
ASoC: tegra: Add Tegra210 based ADMAIF driver
arm64: defconfig: Build AHUB component drivers
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
arm64: tegra: Add DT binding for AHUB components
.../bindings/sound/nvidia,tegra186-dspk.yaml | 83 +++
.../bindings/sound/nvidia,tegra210-admaif.yaml | 111 +++
.../bindings/sound/nvidia,tegra210-ahub.yaml | 136 ++++
.../bindings/sound/nvidia,tegra210-dmic.yaml | 83 +++
.../bindings/sound/nvidia,tegra210-i2s.yaml | 101 +++
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 217 +++++-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 225 +++++-
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 12 +
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 140 ++++
arch/arm64/configs/defconfig | 8 +
sound/soc/tegra/Kconfig | 56 ++
sound/soc/tegra/Makefile | 10 +
sound/soc/tegra/tegra186_dspk.c | 442 +++++++++++
sound/soc/tegra/tegra186_dspk.h | 70 ++
sound/soc/tegra/tegra210_admaif.c | 800 ++++++++++++++++++++
sound/soc/tegra/tegra210_admaif.h | 162 ++++
sound/soc/tegra/tegra210_ahub.c | 676 +++++++++++++++++
sound/soc/tegra/tegra210_ahub.h | 127 ++++
sound/soc/tegra/tegra210_dmic.c | 455 ++++++++++++
sound/soc/tegra/tegra210_dmic.h | 82 +++
sound/soc/tegra/tegra210_i2s.c | 812 +++++++++++++++++++++
sound/soc/tegra/tegra210_i2s.h | 126 ++++
sound/soc/tegra/tegra_cif.h | 65 ++
sound/soc/tegra/tegra_pcm.c | 235 +++++-
sound/soc/tegra/tegra_pcm.h | 21 +-
25 files changed, 5251 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
create mode 100644 sound/soc/tegra/tegra186_dspk.c
create mode 100644 sound/soc/tegra/tegra186_dspk.h
create mode 100644 sound/soc/tegra/tegra210_admaif.c
create mode 100644 sound/soc/tegra/tegra210_admaif.h
create mode 100644 sound/soc/tegra/tegra210_ahub.c
create mode 100644 sound/soc/tegra/tegra210_ahub.h
create mode 100644 sound/soc/tegra/tegra210_dmic.c
create mode 100644 sound/soc/tegra/tegra210_dmic.h
create mode 100644 sound/soc/tegra/tegra210_i2s.c
create mode 100644 sound/soc/tegra/tegra210_i2s.h
create mode 100644 sound/soc/tegra/tegra_cif.h
--
2.7.4
ADMAIF is the interface between ADMA and AHUB. Each ADMA channel that
sends/receives data to/from AHUB must intreface through an ADMAIF channel.
ADMA channel sending data to AHUB pairs with an ADMAIF Tx channel and
similarly ADMA channel receiving data from AHUB pairs with an ADMAIF Rx
channel. Buffer size is configurable for each ADMAIF channel, but currently
SW uses default values.
This patch registers ADMAIF driver with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes ADMAIF interfaces, which can be used to connect different
components in the ASoC layer. Makefile and Kconfig support is added to
allow to build the driver. The ADMAIF device can be enabled in the DT via
"nvidia,tegra210-admaif" compatible binding.
Tegra PCM driver is updated to expose required PCM interfaces and
snd_pcm_ops callbacks.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-8-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Overview
========
Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio
Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio
pre-processing and post-processing. It also includes a programmable full
crossbar for routing audio data across these accelerators.
This series exposes some of these below mentioned HW devices as ASoC
components for Tegra platforms from Tegra210 onwards.
* ADMAIF : The interface between ADMA and AHUB
* XBAR : Crossbar for routing audio samples across various modules
* I2S : Inter-IC Sound Controller
* DMIC : Digital Microphone
* DSPK : Digital Speaker
Following is the summary of current series.
* Add YAML DT binding documentation for above mentioned modules.
* Helper function for ACIF programming is exposed for Tegra210 and later.
* Add ASoC driver components for each of the above modules.
* Build ACONNECT and ADMA drivers which are essential to realize audio
use case.
* Add DT entries for above components for Tegra210, Tegra186 and
Tegra194.
As per the suggestion in [0] audio graph based sound card support
is pushed in a separate series.
[0] https://lkml.org/lkml/2020/6/27/4
Changelog
=========
v4 -> v5
--------
* Common changes
- simple-card driver changes are dropped. Changes are migrated to audio
graph card and are moved to a separate series as suggested.
- '#sound-dai-cells' property is not needed for planned audio graph card
Hence dropped from documentation and related DT binding of component
drivers.
- CIF and DAP DAIs are added for I/O drivers (DMIC, DSPK, I2S) to
represent DAI links using audio graph card. Similary DAIs are added in
AHUB driver to describe endpoints in audio crossbar. Routing is updated
to reflect the same in drivers.
v3 -> v4
--------
* [1/23] "ASoC: dt-bindings: tegra: Add DT bindings for Tegra210"
- Removed multiple examples and retained one example per doc
- Fixed as per inputs on the previous series
- Tested bindings with 'make dt_binding_check/dtbs_check'
* [2/23] "ASoC: tegra: Add support for CIF programming"
- No change
* Common changes (for patch [3/10] to [7/10])
- Mixer control overrides, for PCM parameters (rate, channel, bits),
in each driver are dropped.
- Updated routing as per DPCM usage
- Minor changes related to formatting
* New changes (patch [8/23] to [18/23] and patch [23/23])
- Based on discussions in following threads DPCM is used for Tegra Audio.
https://lkml.org/lkml/2020/2/20/91https://lkml.org/lkml/2020/4/30/519
- The simple-card driver is used for Tegra Audio and accordingly
some enhancements are made in simple-card and core drivers.
- Patch [8/23] to [18/23] are related to simple-card and core changes.
- Patch [23/23] adds sound card support to realize complete audio path.
This is based on simple-card driver with proposed enhancements.
- Re-ordered patches depending on above
v2 -> v3
--------
* [1/10] "dt-bindings: sound: tegra: add DT binding for AHUB
- Updated licence
- Removed redundancy w.r.t items/const/enum
- Added constraints wherever needed with "pattern" property
* [2/10] "ASoC: tegra: add support for CIF programming"
- Removed tegra_cif.c
- Instead added inline helper function in tegra_cif.h
* common changes (for patch [3/10] to [7/10])
- Replace LATE system calls with Normal sleep
- Remove explicit RPM suspend in driver remove() call
- Use devm_kzalloc() instead of devm_kcalloc() for single element
- Replace 'ret' with 'err' for better reading
- Consistent error printing style across drivers
- Minor formating fixes
* [8/10] "arm64: tegra: add AHUB components for few Tegra chips"
- no change
* [9/10] "arm64: tegra: enable AHUB modules for few Tegra chips"
- no change
* [10/10] "arm64: defconfig: enable AHUB components for Tegra210 and later"
(New patch)
- Enables ACONNECT and AHUB components. With this AHUB and components are
registered with ASoC core.
v1 -> v2
--------
* [1/9] "dt-bindings: sound: tegra: add DT binding for AHUB"
- no changes
* [2/9] "ASoC: tegra: add support for CIF programming"
- removed CIF programming changes for legacy chips.
- this patch now exposes helper function for CIF programming,
which can be used on Tegra210 later.
- later tegra_cif.c can be extended for legacy chips as well.
- updated commit message accordingly
* [3/9] "ASoC: tegra: add Tegra210 based DMIC driver"
- removed unnecessary initialization of 'ret' in probe()
* [4/9] "ASoC: tegra: add Tegra210 based I2S driver"
- removed unnecessary initialization of 'ret' in probe()
- fixed indentation
- added consistent bracing for if-else clauses
- updated 'rx_fifo_th' type to 'unsigned int'
- used BIT() macro for defines like '1 << {x}' in tegra210_i2s.h
* [5/9] "ASoC: tegra: add Tegra210 based AHUB driver"
- used of_device_get_match_data() to get 'soc_data' and removed
explicit of_match_device()
- used devm_platform_ioremap_resource() and removed explicit
platform_get_resource()
- fixed indentation for devm_snd_soc_register_component()
- updated commit message
- updated commit message to reflect compatible binding for Tegra186 and
Tegra194.
* [6/9] "ASoC: tegra: add Tegra186 based DSPK driver"
- removed unnecessary initialization of 'ret' in probe()
- updated 'max_th' to 'unsigned int'
- shortened lengthy macro names to avoid wrapping in
tegra186_dspk_wr_reg() and to be consistent
* [7/9] "ASoC: tegra: add Tegra210 based ADMAIF driver"
- used of_device_get_match_data() and removed explicit of_match_device()
- used BIT() macro for defines like '1 << {x}' in tegra210_admaif.h
- updated commit message to reflect compatible binding for Tegra186 and
Tegra194.
* [8/9] "arm64: tegra: add AHUB components for few Tegra chips"
- no change
* [9/9] "arm64: tegra: enable AHUB modules for few Tegra chips"
- no change
* common changes for patch [3/9] to [7/9]
- sorted headers in alphabetical order
- moved MODULE_DEVICE_TABLE() right below *_of_match table
- removed macro DRV_NAME
- removed explicit 'owner' field from platform_driver structure
- added 'const' to snd_soc_dai_ops structure
Sameer Pujar (11):
ASoC: dt-bindings: tegra: Add DT bindings for Tegra210
ASoC: tegra: Add support for CIF programming
ASoC: tegra: Add Tegra210 based DMIC driver
ASoC: tegra: Add Tegra210 based I2S driver
ASoC: tegra: Add Tegra210 based AHUB driver
ASoC: tegra: Add Tegra186 based DSPK driver
ASoC: tegra: Add Tegra210 based ADMAIF driver
arm64: defconfig: Build AHUB component drivers
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
arm64: tegra: Add DT binding for AHUB components
.../bindings/sound/nvidia,tegra186-dspk.yaml | 83 +++
.../bindings/sound/nvidia,tegra210-admaif.yaml | 111 +++
.../bindings/sound/nvidia,tegra210-ahub.yaml | 136 ++++
.../bindings/sound/nvidia,tegra210-dmic.yaml | 83 +++
.../bindings/sound/nvidia,tegra210-i2s.yaml | 101 +++
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 217 +++++-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 225 +++++-
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 12 +
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 140 ++++
arch/arm64/configs/defconfig | 8 +
sound/soc/tegra/Kconfig | 56 ++
sound/soc/tegra/Makefile | 10 +
sound/soc/tegra/tegra186_dspk.c | 442 +++++++++++
sound/soc/tegra/tegra186_dspk.h | 70 ++
sound/soc/tegra/tegra210_admaif.c | 800 ++++++++++++++++++++
sound/soc/tegra/tegra210_admaif.h | 162 ++++
sound/soc/tegra/tegra210_ahub.c | 676 +++++++++++++++++
sound/soc/tegra/tegra210_ahub.h | 127 ++++
sound/soc/tegra/tegra210_dmic.c | 455 ++++++++++++
sound/soc/tegra/tegra210_dmic.h | 82 +++
sound/soc/tegra/tegra210_i2s.c | 812 +++++++++++++++++++++
sound/soc/tegra/tegra210_i2s.h | 126 ++++
sound/soc/tegra/tegra_cif.h | 65 ++
sound/soc/tegra/tegra_pcm.c | 235 +++++-
sound/soc/tegra/tegra_pcm.h | 21 +-
25 files changed, 5251 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
create mode 100644 sound/soc/tegra/tegra186_dspk.c
create mode 100644 sound/soc/tegra/tegra186_dspk.h
create mode 100644 sound/soc/tegra/tegra210_admaif.c
create mode 100644 sound/soc/tegra/tegra210_admaif.h
create mode 100644 sound/soc/tegra/tegra210_ahub.c
create mode 100644 sound/soc/tegra/tegra210_ahub.h
create mode 100644 sound/soc/tegra/tegra210_dmic.c
create mode 100644 sound/soc/tegra/tegra210_dmic.h
create mode 100644 sound/soc/tegra/tegra210_i2s.c
create mode 100644 sound/soc/tegra/tegra210_i2s.h
create mode 100644 sound/soc/tegra/tegra_cif.h
--
2.7.4
The Digital Speaker Controller (DSPK) converts the multi-bit Pulse Code
Modulation (PCM) audio input to oversampled 1-bit Pulse Density Modulation
(PDM) output. From the signal flow perpsective, the DSPK can be viewed as
a PDM transmitter that up-samples the input to the desired sampling rate
by interpolation then converts the oversampled PCM input to the desired
1-bit output via Delta Sigma Modulation (DSM).
This patch registers DSPK component with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes DSPK interfaces, which can be used to connect different
components in the ASoC layer. Makefile and Kconfig support is added to
allow to build the driver. The DSPK devices can be enabled in the DT via
"nvidia,tegra186-dspk" compatible binding. This driver can be used
on Tegra194 chip as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-7-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Audio Hub (AHUB) comprises a collection of hardware accelerators for
audio pre/post-processing and a programmable full crossbar (XBAR) for
routing audio data across these accelerators in time and in parallel.
AHUB supports multiple interfaces to I2S, DSPK, DMIC etc., XBAR is a
switch used to configure or modify audio routing between HW accelerators
present inside AHUB.
This patch registers AHUB component with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes AHUB interfaces, which can be used to connect different
components in the ASoC layer. Currently the driver takes care of XBAR
programming to allow audio data flow through various clients of the AHUB.
Makefile and Kconfig support is added to allow to build the driver. The
AHUB component can be enabled in the DT via below compatible bindings.
- "nvidia,tegra210-ahub" for Tegra210
- "nvidia,tegra186-ahub" for Tegra186 and Tegra194
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-6-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Inter-IC Sound (I2S) controller implements full-duplex, bi-directional
and single direction point to point serial interface. It can interface
with I2S compatible devices. Tegra I2S controller can operate as both
master and slave.
This patch registers I2S controller with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes I2S interfaces, which can be used to connect different
components in the ASoC layer. Makefile and Kconfig support is added to
allow to build the driver. The I2S devices can be enabled in the DT via
"nvidia,tegra210-i2s" compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-5-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Digital MIC (DMIC) Controller is used to interface with Pulse Density
Modulation (PDM) input devices. The DMIC controller implements a converter
to convert PDM signals to Pulse Code Modulation (PCM) signals. From signal
flow perspective, the DMIC can be viewed as a PDM receiver.
This patch registers DMIC component with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes DMIC interfaces, which can be used to connect different
components in the ASoC layer. Makefile and Kconfig support is added to
allow to build the driver. The DMIC devices can be enabled in the DT via
"nvidia,tegra210-dmic" compatible string. This driver can be used for
Tegra186 and Tegra194 chips as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Client Interface (CIF) is a proprietary interface employed to route
audio samples through Audio Hub (AHUB) components by inter connecting the
various modules.
This patch exports an inline function tegra_set_cif() which can be used,
for now, to program CIF on Tegra210 and later Tegra generations. Later it
can be extended to include helpers for legacy chips as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/1595134890-16470-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200613204422.24484-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra PMC clock clk_out_1 is dedicated for audio mclk from Tegra30
through Tegra210 and currently Tegra clock driver keeps the audio mclk
enabled.
With the move of PMC clocks from clock driver into pmc driver, audio
mclk enable from clock driver is removed and this should be taken care
of by the audio driver.
tegra_asoc_utils_init() calls tegra_asoc_utils_set_rate() and audio mclk
rate configuration is not needed during init and the rate is actually
set during the ->hw_params() callback.
So, this patch removes tegra_asoc_utils_set_rate() call and just leaves
the audio mclk enabled.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra PMC clock clk_out_1 is dedicated for audio mclk from Tegra30
through Tegra210 and currently Tegra clock driver does the initial
parent configuration for audio mclk and keeps it enabled by default.
With the move of PMC clocks from clock driver into PMC driver, audio
clocks parent configuration can be specified through the device tree
using assigned-clock-parents property and audio mclk control should be
taken care of by the audio driver.
This patch has implementation for parent configuration when default
parent configuration through assigned-clock-parents property is not
specified in the device tree.
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
tegra_asoc_utils uses clk_get() to get the clock and clk_put() to free
them explicitly.
This patch updates it to use device managed resource API devm_clk_get()
so the clock will be automatically released and freed when the device is
unbound and removes tegra_asoc_utils_fini() as its no longer needed.
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The microphone-jack state needs to be masked in a case of a 4-pin jack
when microphone and ground pins are shorted. Presence of nvidia,headset
tells that WM8903 CODEC driver should mask microphone's status if short
circuit is detected, i.e headphones are inserted.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200330204011.18465-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The enable-GPIO needs to be toggled on a DAPM event in order to turn
microphone ON/OFF, otherwise microphone won't work.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200320205504.30466-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit f3ee99087c ("ASoC: tegra: Allow
24bit and 32bit samples") added 24-bit and 32-bit support for to the
Tegra30 I2S driver. However, there are two additional commits that are
also needed to get 24-bit and 32-bit support to work correctly. These
commits are not yet applied because there are still some review comments
that need to be addressed. With only this change applied, 24-bit and
32-bit support is advertised by the I2S driver, but it does not work and
the audio is distorted. Therefore, revert this patch for now until the
other changes are also ready.
Furthermore, a clock issue with 24-bit support has been identified with
this change and so if we revert this now, we can also fix that in the
updated version.
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200131091901.13014-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Now, snd_soc_dai_driver::bus_control is used for how to resume.
But, no driver which has bus_control has DAI driver suspend/resume
support.
This patch removes pointless bus_control from ALSA SoC.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pnffx7i4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_get_pcm_runtime() is finding rtd by checking dai_link
name. But, it is strange and waste of CPU power, because its user want
to get from rtd from dai_link, not from dai_link name.
This patch find rtd via dai_link pointer instead of its name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87a781yq67.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We see odd FIFO overruns with this, we assume the best thing to do is
to disable the RX I2S frontend first, and then disable the FIFO that
is using it.
This also fixes an issue where using multi-word frames (TDM) have
partial samples stuck in the FIFO which then get read out when the
next capture is started.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-5-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a callback to configure TDM settings for the Tegra30 I2S ASoC 'platform'
driver.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: merge fix for power management]
[ben.dooks@codethink.co.uk: add review change for fsync of 1 clock]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
The tegra3 audio can support 24 and 32 bit sample sizes so add the
option to the tegra30_i2s_hw_params to configure the S24_LE or S32_LE
formats when requested.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: fixup merge of 24 and 32bit]
[ben.dooks@codethink.co.uk: add pm calls around ytdm config]
[ben.dooks@codethink.co.uk: drop debug printing to dev_dbg]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-3-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190904083909.18804-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-3-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-2-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 567b374d99 ("ASoC: tegra: trimslice: don't select unnecessary
Platform")
Current ALSA SoC avoid to add duplicate component to rtd,
and this driver was selecting CPU component as Platform component.
Thus, above patch removed Platform settings from this driver,
because it assumed these are same component.
But, some CPU driver is using generic DMAEngine, in such case, both
CPU component and Platform component will have same of_node/name.
In other words, there are some components which are different but
have same of_node/name.
In such case, Card driver definitely need to select Platform even
though it is same as CPU.
It is depends on CPU driver, but is difficult to know it from Card driver.
This patch reverts above patch.
Fixes: commit 567b374d99 ("ASoC: tegra: trimslice: don't select unnecessary Platform")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 5d62677238 ("ASoC: tegra: tegra_wm9712: don't select unnecessary
Platform")
Current ALSA SoC avoid to add duplicate component to rtd,
and this driver was selecting CPU component as Platform component.
Thus, above patch removed Platform settings from this driver,
because it assumed these are same component.
But, some CPU driver is using generic DMAEngine, in such case, both
CPU component and Platform component will have same of_node/name.
In other words, there are some components which are different but
have same of_node/name.
In such case, Card driver definitely need to select Platform even
though it is same as CPU.
It is depends on CPU driver, but is difficult to know it from Card driver.
This patch reverts above patch.
Fixes: commit 5d62677238 ("ASoC: tegra: tegra_wm9712: don't select unnecessary Platform")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit b28d985271 ("ASoC: tegra: tegra_wm8903: don't select unnecessary
Platform")
Current ALSA SoC avoid to add duplicate component to rtd,
and this driver was selecting CPU component as Platform component.
Thus, above patch removed Platform settings from this driver,
because it assumed these are same component.
But, some CPU driver is using generic DMAEngine, in such case, both
CPU component and Platform component will have same of_node/name.
In other words, there are some components which are different but
have same of_node/name.
In such case, Card driver definitely need to select Platform even
though it is same as CPU.
It is depends on CPU driver, but is difficult to know it from Card driver.
This patch reverts above patch.
Fixes: commit b28d985271 ("ASoC: tegra: tegra_wm8903: don't select unnecessary Platform")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 404b229b84 ("ASoC: tegra: tegra_wm8753: don't select unnecessary
Platform")
Current ALSA SoC avoid to add duplicate component to rtd,
and this driver was selecting CPU component as Platform component.
Thus, above patch removed Platform settings from this driver,
because it assumed these are same component.
But, some CPU driver is using generic DMAEngine, in such case, both
CPU component and Platform component will have same of_node/name.
In other words, there are some components which are different but
have same of_node/name.
In such case, Card driver definitely need to select Platform even
though it is same as CPU.
It is depends on CPU driver, but is difficult to know it from Card driver.
This patch reverts above patch.
Fixes: commit 404b229b84 ("ASoC: tegra: tegra_wm8753: don't select unnecessary Platform")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit cee1cf3f9f ("ASoC: tegra: tegra_sgtl5000: don't select unnecessary
Platform")
Current ALSA SoC avoid to add duplicate component to rtd,
and this driver was selecting CPU component as Platform component.
Thus, above patch removed Platform settings from this driver,
because it assumed these are same component.
But, some CPU driver is using generic DMAEngine, in such case, both
CPU component and Platform component will have same of_node/name.
In other words, there are some components which are different but
have same of_node/name.
In such case, Card driver definitely need to select Platform even
though it is same as CPU.
It is depends on CPU driver, but is difficult to know it from Card driver.
This patch reverts above patch.
Fixes: commit cee1cf3f9f ("ASoC: tegra: tegra_sgtl5000: don't select unnecessary Platform")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit d035d13b22 ("ASoC: tegra: tegra_rt5677: don't select unnecessary
Platform")
Current ALSA SoC avoid to add duplicate component to rtd,
and this driver was selecting CPU component as Platform component.
Thus, above patch removed Platform settings from this driver,
because it assumed these are same component.
But, some CPU driver is using generic DMAEngine, in such case, both
CPU component and Platform component will have same of_node/name.
In other words, there are some components which are different but
have same of_node/name.
In such case, Card driver definitely need to select Platform even
though it is same as CPU.
It is depends on CPU driver, but is difficult to know it from Card driver.
This patch reverts above patch.
Fixes: commit d035d13b22 ("ASoC: tegra: tegra_rt5677: don't select unnecessary Platform")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
