Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which allows us dropping superfluous CONFIG_PM
ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: patches@opensource.cirrus.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250317095603.20073-6-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused attributes
and CONFIG_PM ifdefs.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS () and SET_SYSTEM_SLEEP_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
-flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250312072635.1429870-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
When snd_soc_dapm_new_controls() or snd_soc_dapm_add_routes() fails,
wcd937x_soc_codec_probe() returns without releasing 'wcd937x->clsh_info',
which is allocated by wcd_clsh_ctrl_alloc. Add wcd_clsh_ctrl_free()
to prevent potential memory leak.
Fixes: 313e978df7 ("ASoC: codecs: wcd937x: add audio routing and Kconfig")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250226085050.3584898-1-haoxiang_li2024@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
clk_disable_unprepare() already checks NULL by using IS_ERR_OR_NULL.
Remove unneeded NULL check for adc3xxx->mclk here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250312034337.1235378-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
All varibale allocated by kzalloc and devm_kzalloc could be NULL.
Multiple pointer checks and their cleanup are added.
This issue is found by our static analysis tool
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://patch.msgid.link/20250311015714.1333857-1-chenyuan0y@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code for the IRQ in pcm6240 makes no sense:
it looks up an IRQ with of_irq_get(), treat it as a GPIO
by issuing gpio_request(), gpio_direction_input()
and gpio_to_irq() on it.
This is just wrong, if the device tree assigns the IRQ
from a GPIO number this is just incorrect: it is clearly
stated that GPIO providers and IRQ providers are
orthogonal.
It is possible to look up an IRQ to a corresponding GPIO
line but this is taking an IRQ and pretending it's a
GPIO, which is just semantically wrong.
Drop the offending code and treat the IRQ that we get
from the device tree as any other IRQ, see for example
other codec drivers.
The DT bindings for this codec does not have any in-tree
DTS files, which may explain why things are weird.
As a bonus, this moves the driver away from the legacy
<linux/gpio.h> include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250312-pcm-codecs-v1-3-41ffc4f8fc5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the PCM3008 driver to look up the GPIO lines
using descriptors.
Apparently there are no in-tree users of the platform data
struct, so users need to adopt.
New users can associate the GPIO lines with the platform
device "pcm3008-codec".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250312-pcm-codecs-v1-2-41ffc4f8fc5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO header <linux/gpio.h>
but does not use any symbols from it so drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250312-pcm-codecs-v1-1-41ffc4f8fc5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a stub for mt6359_accdet_enable_jack_detect() to prevent linker
failures in the machine sound drivers calling it when
CONFIG_SND_SOC_MT6359_ACCDET is not enabled.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250306-mt8188-accdet-v3-3-7828e835ff4b@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is for amplifiers aw88166 of Awinic Technology
Corporation. The AW88166 is a high efficiency digital
Smart K audio amplifier
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://patch.msgid.link/20250312120100.9730-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The former code sets the V slot from inside set_bitwidth according to
the bitwidth of the PCM format. That's wrong, since:
* It overrides the V slot parsed from DT binding.
* The V slot is set shifted behind the I slot by the length of the PCM
bitwidth, but the PCM bitwidth has no assured relation to the TDM
slot width.
Replace the former logic by setting up the I/V sense transmission only
in case of both I/V slots being specified in devicetree, and never
override those values. In case the slots are left unspecified, disable
the transmission completely.
There's an improbable case someone is relying on the old behavior, but
if so, that's a setup that only works by accident, and cannot be sanely
supported going forward. There's no indication anyone is consuming the
I/V sense data up to today, so break the former behavior.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-6-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new explicit function for the setting of I/V sense TDM slots.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-5-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add control to expose the option of autoretry behavior on overcurrent
events in the codec.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-4-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SN012776 is a speaker amp chip found in Apple's 2021 laptops. It appears
similar and more-or-less compatible to TAS2764. Extend the TAS2764
driver with some SN012776 specifics and configure the chip assuming
it's in one of the Apple machines.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-3-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The custom suspend function causes a build warning when CONFIG_PM_SLEEP
is disabled:
sound/soc/codecs/cs42l43.c:2405:12: error: unused function 'cs42l43_codec_runtime_force_suspend' [-Werror,-Wunused-function]
Change SET_SYSTEM_SLEEP_PM_OPS() to the newer SYSTEM_SLEEP_PM_OPS(),
to avoid this.
Fixes: 164b7dd454 ("ASoC: cs42l43: Add jack delay debounce after suspend")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250305172738.3437513-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmfOKBUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1aQH/iC+Oyij4VxAjBek
BOXIT/p6CwlIXb8ObiWWcRjDPizlcxb3RaV8J2RO+IqaQ2wltxpFANq2G7Re2FPm
SNcEpIURAOVcxHGedcfFA91srO5F4FzNTO8LVp7MIbcgMYy3pdk+dbZmi6A691R+
t9pb74m+MAnF1o/MUx7pUlhAT/4ymuuR0F7WCSg4h0Xwe5m0nlJY89kJBC7PCjyd
n3mdhsz3rDSLmt/z/T7HGD89r8sYSvm9cOKtL3ELgGTrm7boQV8ii9Y9w04DI8PQ
JmIernugcCxmhH36mVUAHgJf2+/T388xFUh/D5+skeUOUZpaJZG866rnb32WpsHc
eWLFUeg=
=Wypt
-----END PGP SIGNATURE-----
Backmerge tag 'v6.14-rc6' into drm-next
This is a backmerge from Linux 6.14-rc6, needed for the nova PR.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Free some resources in the error handling path of the probe, as already
done in the remove function.
Fixes: e3523e0186 ("ASoC: wm0010: Add initial wm0010 DSP driver")
Fixes: fd8b965744 ("ASoC: wm0010: Clear IRQ as wake source and include missing header")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/5139ba1ab8c4c157ce04e56096a0f54a1683195c.1741549792.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the return value from spi_setup() is not checked for a failure.
It is unlikely it will ever fail in this particular case but it is still
better to add this check for the sake of completeness and correctness. This
is cheap since it is performed once when the device is being probed.
Handle spi_setup() return value.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 872fc0b6bd ("ASoC: cs35l41: Set the max SPI speed for the whole device")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Link: https://patch.msgid.link/20250304115643.2748-1-v.shevtsov@mt-integration.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT722_SDCA_ENT_FU15,
RT722_SDCA_CTL_FU_CH_GAIN, CH_01) ... SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY,
RT722_SDCA_ENT_FU15, RT722_SDCA_CTL_FU_CH_GAIN, CH_04) are used by the
"FU15 Boost Volume" control, but not marked as readable.
And the mbq size are 2 for those registers.
Fixes: 7f5d6036ca ("ASoC: rt722-sdca: Add RT722 SDCA driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250310080440.58797-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The custom suspend function causes a build warning when CONFIG_PM_SLEEP
is disabled:
sound/soc/codecs/cs42l43.c:2405:12: error: unused function 'cs42l43_codec_runtime_force_suspend' [-Werror,-Wunused-function]
Change SET_SYSTEM_SLEEP_PM_OPS() to the newer SYSTEM_SLEEP_PM_OPS(),
to avoid this.
Fixes: 164b7dd454 ("ASoC: cs42l43: Add jack delay debounce after suspend")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250305172738.3437513-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The changes to DECLARE_ADAU17X1_DSP_MUX_CTRL did avoid the issue with a
compiler not liking all the macro indirection. However it introduced a
new issue with respect to the mux not being declared static:
sound/soc/codecs/adau17x1.c:275:8: sparse: sparse: symbol
'adau17x1_dac_mux' was not declared. Should it be static?
sound/soc/codecs/adau17x1.c:278:8: sparse: sparse: symbol
'adau17x1_capture_mux' was not declared. Should it be static?
Fix this up by going back to the inline declaration of the soc_enum, but
just call SOC_ENUM_EXT directly rather than indirecting through
SOC_DAPM_ENUM_EXT.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503061119.4QGlnOi6-lkp@intel.com/
Fixes: c951b20766 ("ASoC: dapm: Use ASoC control macros where possible")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250306104233.1638625-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"generic_new_peripheral_assigned: invalid dev_num 1, wake supported 1"
is reported by our internal CI test.
Rt1320's wake feature is not used in Linux and that's why it is not in
the wake_capable_list[] list in intel_auxdevice.c.
However, BIOS may set it as wake-capable. Overwrite wake_capable to 0
in the codec driver to align with wake_capable_list[].
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250305134113.201326-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Tidy up the ASoC control value macros. Fix some drivers that should be
using core macros that aren't, combine the existing core macros to be
a little more consistent in style, and update the core macros to use
each other where possible.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The series aims to streamline the formatting for ACPI IDs so that a
single pattern can be used to identify the device.
Work implicitly suggested by Andy Shevchenko - reading and learning from
number of his reviews on the Linux mailing lists.
Several formats do exists, however, after technical discussion PCI-based
format has been selected as the recommended one. For Realtek devices, it
is going to be 10ECxxxx where 10EC unambiguously identifies Realtek
company whereas the following 4 hexes specify the PART_ID i.e.: the
device.
While at it, there shall be no comma after the terminator entry and
initializing fields with 0 for statically defined structs is redundant.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We have both
(A) SND_SOC_DAIFMT_CB{M/S}_CF{M/S} : Master/Slave.
(B) SND_SOC_DAIFMT_CB{P/C}_CF{P/S} : Provider/Consumer
We should use (B), and want to remove (A). This patch-set do it.
Hardware reports jack absent after reset/suspension regardless of jack
state, so introduce an additional delay only in suspension case to allow
proper detection to take place after a short delay.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250304140504.139245-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent dtbs_check error fix in mt6359.dtsi file changed a node name
(from "mt6359codec" to "audio-codec") without modifying the mt6539
codec code that uses it.
It leads to a probe failure after devicetree parsing returns in error:
```
[ 1.354025] mt6359-sound mt6359-sound: mt6359_platform_driver_probe() failed to parse dts
[ 1.355066] mt6359-sound mt6359-sound: probe with driver mt6359-sound failed with error -22
```
So, add the child node retrieval with the new name and if not found,
try with the older one for backward compatibility.
Fixes: 76b35f59bb ("arm64: dts: mediatek: mt6359: fix dtbs_check error for audio-codec")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250228-mt6359-fix-probe-failed-v1-1-64941d387b2c@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the DAPM kcontrol creation macros to use the ASoC macros where a
helpful version exists. One minor fixup is required in adau17x1, the
compiler doesn't like the extra level of macro indirection coupled with
the inline struct definition. Make the struct definition explicit.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250303171424.444556-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt715 does not appear to use the SOC_DOUBLE_R_EXT() macro and even
if it did, the macro is defined identically in the ASoC headers.
Remove the redundant macro definitions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250303171424.444556-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Temperatures are reported in units of Celsius however hwmon expects
values to be in millidegree of Celsius. Userspace tools observe values
close to zero and report it as "Not available" or incorrect values like
0C or 1C. Add a simple conversion to fix that.
Before the change:
wsa884x-virtual-0
Adapter: Virtual device
temp1: +0.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1: +0.0°C
Also reported as N/A before first amplifier power on.
After this change and initial wsa884x power on:
wsa884x-virtual-0
Adapter: Virtual device
temp1: +39.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1: +37.0°C
Tested on sm8550 only.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250221044024.1207921-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Read temperature of the amplifier and expose it via hwmon interface, which
will be later used during calibration of speaker protection algorithms.
The method is the same as for wsa884x and therefore this is based on
Krzysztof Kozlowski's approach implemented in commit 6b99dc62d9 ("ASoC:
codecs: wsa884x: Implement temperature reading and hwmon").
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Link: https://patch.msgid.link/20250221032141.1206902-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow PCI-based format (10ECxxxx) for ACPI IDs by adding relevant
entries to the existing table.
While at it, there shall be no comma after the terminator entry and
initializing fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-23-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow PCI-based format (10ECxxxx) for ACPI IDs by adding relevant
entries to the existing table.
While at it, there shall be no comma after the terminator entry and
initializing fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-22-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow PCI-based format (10ECxxxx) for ACPI IDs by adding relevant
entries to the existing table.
While at it, there shall be no comma after the terminator entry and
initializing fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-21-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-20-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
While at it, sort the IDs alphabetically.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-19-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-18-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-17-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
While at it, sort the IDs alphabetically.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
While at it, sort the IDs alphabetically.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
While at it, sort the IDs alphabetically.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
While at it, sort the IDs alphabetically.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
While at it, sort the IDs alphabetically.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do some clean up for some define in header file.
Like change lower case in value, up case in define,
space add in recommends, change date of files and add author.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250226144328.11645-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because there is no playback switch control for rt712-sdw headphone endpoint,
it causes there is no way to control HP on and off in ALSA UCM config.
Signed-off-by: derek.fang <derek.fang@realtek.com>
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250226084728.1889082-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SPI is used for control, the driver must hold the SPI bus lock
while issuing the sequence of writes to perform a soft reset.
>From the time the driver writes the SYSTEM_RESET command until the
driver does a write to terminate the reset, there must not be any
activity on the SPI bus lines. If there is any SPI activity during the
soft-reset, another soft-reset will be triggered. The state of the SPI
chip select is irrelevant.
A repeated soft-reset does not in itself cause any problems, and it is
not an infinite loop. The problem is a race between these resets and
the driver polling for boot completion. There is a time window between
soft resets where the driver could read HALO_STATE as 2 (fully booted)
while the chip is actually soft-resetting. Although this window is
small, it is long enough that it is possible to hit it in normal
operation.
To prevent this race and ensure the chip really is fully booted, the
driver calls spi_bus_lock() to prevent other activity while resetting.
It then issues the SYSTEM_RESET mailbox command. After allowing
sufficient time for reset to take effect, the driver issues a PING
mailbox command, which will force completion of the full soft-reset
sequence. The SPI bus lock can then be released. The mailbox is
checked for any boot or wakeup response from the firmware, before the
value in HALO_STATE will be trusted.
This does not affect SoundWire or I2C control.
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250225131843.113752-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into drm-next
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next
can base on rc4.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Remove hard-coded strings by using the str_enable_disable() helper
function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20250220120100.1530-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
The ES8328 codec driver, which is also used for the ES8388 chip that
appears to have an identical register map, claims that the output can
either take the route from DAC->Mixer->Output or through DAC->Output
directly. To the best of what I could find, this is not true, and
creates problems.
Without DACCONTROL17 bit index 7 set for the left channel, as well as
DACCONTROL20 bit index 7 set for the right channel, I cannot get any
analog audio out on Left Out 2 and Right Out 2 respectively, despite the
DAPM routes claiming that this should be possible. Furthermore, the same
is the case for Left Out 1 and Right Out 1, showing that those two don't
have a direct route from DAC to output bypassing the mixer either.
Those control bits toggle whether the DACs are fed (stale bread?) into
their respective mixers. If one "unmutes" the mixer controls in
alsamixer, then sure, the audio output works, but if it doesn't work
without the mixer being fed the DAC input then evidently it's not a
direct output from the DAC.
ES8328/ES8388 are seemingly not alone in this. ES8323, which uses a
separate driver for what appears to be a very similar register map,
simply flips those two bits on in its probe function, and then pretends
there is no power management whatsoever for the individual controls.
Fair enough.
My theory as to why nobody has noticed this up to this point is that
everyone just assumes it's their fault when they had to unmute an
additional control in ALSA.
Fix this in the es8328 driver by removing the erroneous direct route,
then get rid of the playback switch controls and have those bits tied to
the mixer's widget instead, which until now had no register to play
with.
Fixes: 567e4f9892 ("ASoC: add es8328 codec driver")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20250222-es8328-route-bludgeoning-v1-1-99bfb7fb22d9@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TX launch polarity needs to be the opposite of RX capture polarity, to
generate the right bit slot alignment.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250218-apple-codec-changes-v2-28-932760fd7e07@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from broonie@kernel.org:
This is a random subset of the patches for the tas2764 driver that I
found in the Asahi Linux tree which seemed to be clear fixes and
improvements which apply easily to mainline without much effort, there's
a bunch more work on the driver that should also be applicable.
I've only build tested this.
When we shut down the amp, we need to wait for the built-in ramp-down
before we can remove the TDM clocks. There is no documented status
regiter to poll, so the best we can do is a delay. Datasheet says 5.9ms
for ramp-down and 1.5ms between shutdown and next startup, so let's do
6ms after mute and 2ms after shutdown. That gives us a cumulative 8ms
for ramp-down and guaratees the required minimum shutdown time.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2764-v1-2-dbab892a69b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC convention is that clocks are removed after codec mute, and
power up/down is more about top level power management. For these chips,
the "mute" state still expects a TDM clock, and yanking the clock in
this state will trigger clock errors. So, do the full
shutdown<->mute<->active transition on the mute operation, so the amp is
in software shutdown by the time the clocks are removed.
This fixes TDM clock errors when streams are stopped.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2764-v1-1-dbab892a69b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from David Lechner <dlechner@baylibre.com>:
This series was inspired by some minor annoyance I have experienced a
few times in recent reviews.
Calling gpiod_set_array_value_cansleep() can be quite verbose due to
having so many parameters. In most cases, we already have a struct
gpio_descs that contains the first 3 parameters so we end up with 3 (or
often even 6) pointer indirections at each call site. Also, people have
a tendency to want to hard-code the first argument instead of using
struct gpio_descs.ndescs, often without checking that ndescs >= the
hard-coded value.
So I'm proposing that we add a gpiod_multi_set_value_cansleep()
function that is a wrapper around gpiod_set_array_value_cansleep()
that has struct gpio_descs as the first parameter to make it a bit
easier to read the code and avoid the hard-coding temptation.
I've just done gpiod_multi_set_value_cansleep() for now since there
were over 10 callers of this one. There aren't as many callers of
the get and atomic variants, but we can add those too if this seems
like a useful thing to do.
Maintainers, if you prefer to have this go through the gpio tree, please
give your Acked-by:. Several maintainers have also requested an
immutable branch, so I expect that will be made available. And if there
is anything leftover after the next kernel release, I will resend it.
Reduce verbosity by using gpiod_multi_set_value_cansleep() instead of
gpiod_set_array_value_cansleep().
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250210-gpio-set-array-helper-v3-15-d6a673674da8@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using of_property_read_bool() for non-boolean properties has been
deprecated in favour of of_property_present() and since commit
c141ecc3ce ("of: Warn when of_property_read_bool() is used on
non-boolean properties") this also generates a warning:
OF: /soc@0/soundwire@3330000/wcd9380-tx@0,3: Read of boolean property 'qcom,tx-port-mapping' with a value.
Switch to using of_property_present() to look for "qcom,tx-port-mapping"
properties.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250210132128.7734-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For historical reasons, the Castagnoli CRC32 is available under 3 names:
crc32c(), crc32c_le(), and __crc32c_le(). Most callers use crc32c().
The more verbose versions are not really warranted; there is no "_be"
version that the "_le" version needs to be differentiated from, and the
leading underscores are pointless.
Therefore, let's standardize on just crc32c(). Remove the other two
names, and update callers accordingly.
Specifically, the new crc32c() comes from what was previously
__crc32c_le(), so compared to the old crc32c() it now takes a size_t
length rather than unsigned int, and it's now in linux/crc32.h instead
of just linux/crc32c.h (which includes linux/crc32.h).
Later patches will also rename __crc32c_le_combine(), crc32c_le_base(),
and crc32c_le_arch().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Merge series from Mohammad Rafi Shaik <quic_mohs@quicinc.com>:
Add static channel map support between soundwire master and slave.
Currently, the channel value for each soundwire port is hardcoded in the
wcd937x-sdw driver and the same channel value is configured in the
soundwire master.
The Qualcomm board like the QCM6490-IDP require static channel map
settings for the soundwire master and slave ports.
If another boards which are using enable wcd937x, the channel mapping
index values between master and slave may be different depending on the
board hw design and requirements. If the above properties are not used
in a SoC specific device tree, the channel mapping index values are set
to default.
With the introduction of the following channel mapping properties, it is
now possible to configure the master channel mapping directly from the
device tree.
Added qcom_swrm_set_channel_map api to set the master channel values
which allows more flexible to configure channel values in runtime for
specific active soundwire ports.
Add get and set channel maps support from codec to cpu dais in common
Qualcomm sdw driver.
Merge series from Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>:
cpcap audio codec found on cpcap PMIC supports headset detection
and PTT button through its 3.5 mm jack. This series implements
support for those capabilities.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The avs-driver is the go-to driver for Intel Automotive. MalibouLake
(MBL) and RedondoLake (RDL) are representatives of the project. These
inherit majority of the featureset from RaptorLake-M (RPL-M) and
AlderLake-N (ADL-N) respectively. The onboard codec for these is TI's
pcm3168a.
In summary, the patchset:
- modifies existing pcm3168a.c to be x86/ACPI friendly
- updates the DSP firmware booting sequence for cAVS 2.5 platforms to
improve its behaviour on some specific revisions/steppings of the
hardware
- adds new machine board driver, avs_pcm3168a
- adds selector entry for RPL-M devices in intel-dspcfg
While there 'ALSA: hda:' patch within the list, I'd prefer the patchset
to go through Mark's tree to avoid conflicts with follow ups to this
one.
Longer version:
Currently the pcm3168a is supported on ARM/DT (ti/j721e-evm.c being the
only user). To make it x86/ACPI friendly, add relevant ACPI-match table
and relax driver's probing conditions.
The default format is 2ch, 24-bits, 48000kHz. As per specification,
24-bits are supported by the chip and it works in production in contrary
to what the existing code suggests. A fix is provided to align the code
with the spec.
Now, a single DSP firmware binary covers a wide range of platforms - a
single one covers AlderLake, RaptorLake and all their derevatires except
for AlderLake-N based due to MEU differences. While most of the hardware
capabilities are read by the firmware during runtime, some information is
not accessible from the DSP level. Provide the HDAudio controller
revision/stepping information to the firmware to address that.
With that done, expand number of modules supported with WovHostModule
(WHM). WHM is a processing module which is tailored for ultra-low-power
scenarios. From software perspective, as most of its config is similar
to the Copier module, code reuse is advised. To make the reuse possible,
existing gateway configuration code is refactor - not only to add
support for WHM but also make it easier to understand. Multiple smaller
functions instead of all-in-one one.
Report from internal ticket, priv->cali_data.data devm_kzalloc twice,
drop the first one, it is the unnecessary one.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250206123808.1590-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add static channel mapping between master and slave ports in wcd937x-sdw
driver.
Currently, the channel mask for each soundwire port is hardcoded in the
wcd937x-sdw driver, and the same channel mask value is configured in the
soundwire master.
The Qualcomm boards like the QCM6490-IDP require different channel mask
settings for the soundwire master and slave ports.
Implemented logic to read TX/RX channel mappings from device tree
properties (qcom,tx-channel-mapping and qcom,rx-channel-mapping).
Modified the wcd937x_connect_port to handle master channel masks during
port enable/disable operations.
Added wcd937x_get_channel_map api to retrieve the current master
channel map for TX and RX paths.
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://patch.msgid.link/20250206112225.3270400-3-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For systems which load firmware on the cs35l41 which use ACPI, the
_SUB value is used to differentiate firmware and tuning files for the
individual systems. In the case where a system does not have a _SUB
defined in ACPI node for cs35l41, there needs to be a fallback to
allow the files for that system to be differentiated. Since all
ACPI nodes for cs35l41 should have a HID defined, the HID should be a
safe option.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Tested-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20250205164806.414020-1-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using `fsleep` instead of `msleep` resolves some customer complaints
regarding the precision of up/down DAPM event timing. `fsleep()`
automatically selects the appropriate sleep function, making the delay
time more predictable.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20250205160849.500306-1-vitalyr@opensource.cirrus.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Rt722 supports multi-lane and the driver doesn't call sdw_slave_read_prop()
to get all properties. Add sdw_slave_read_lane_mapping() to get the
required lane mapping property.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20250204075224.162661-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use freshly added API and add eld#n files to procfs for the ASoC cards
utilizing HDMI codec. This simplifies debugging of the possible ASoC /
HDMI / DisplayPort audio issues.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250124-alsa-hdmi-codec-eld-v1-2-bad045cfaeac@linaro.org
On ACPI-based systems with Intel MalibouLake there is no "scki" clock
entry defined. Make that initialization part optional and default to
24.576 MHz rate if not set. The rate is the default for both TI and
Intel devices.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250203141051.2361323-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The functions:
mt6358_mtkaif_calibration_disable()
mt6358_mtkaif_calibration_enable()
mt6358_set_mtkaif_calibration_phase()
were added in the 2019
commit 6a8d4198ca ("ASoC: mediatek: mt6358: add codec driver")
but never used.
Remove them.
This leaves mt6358_set_dcxo(), mt6358_set_clksq(),
mt6358_set_aud_global_bias(), also unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250128005243.295977-1-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the MBQ regmap implementation handles multiple sizes, this driver
can combine its two register maps into one. So remove mbq_regmap and
combine all the registers into regmap.
Also as rt722_sdca_adc_mux_get/put() only exist to access mbq_regmap,
rather than doing any processing, these can now be dropped and the
normal DAPM helpers used.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250107154408.814455-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a few missing registers from the readable register callback.
Suggested-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250107154408.814455-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With VAUDIO regulator being always on, we have to put it in low-power mode
when codec is not in use to decrease power usage.
Do so by implementing driver .set_bias_level callback.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Link: https://patch.msgid.link/20250122164129.807247-3-ivo.g.dimitrov.75@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is a collection of fixes that have been gathered since the
previous PR. All about device-specific fixes and quirks, and most
of them are pretty small and trivial.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmecg4cOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE81hA/+KOMzEBGv0JDPYmVujjCOpAW7sl48JWmAWhxj
v0roRbmYttVDtljxGvMze8B4lH8o16pTd+OUXWBV99Py9bG4w3mqGT540kYMlwp3
P1h1sXtBWXdOPqjTH54d+73qPLSHBLvivPDfZ3KUVekTGA6TMvUsMr6BsiOgpFV6
OKduEN1r2yf80IkWLDv2dC8LHKynGUY+sOZYFMk0ILiXzL1ejlilL/pMPFt2FKHG
9+wHE9iIKnZCG7nsLFgHVjNDDnnCNQ7+xIFIcNwxP1d3QQ3XgnyLn5MNYShGEzRy
xv+8NJiBEwLlBh7ebqFoSChxGlphwep5PyTg3sfPOAzZMkYeP8KkR0vc7LegvBl/
zYkyEUCid/h9d3TvxCrgRxjcWdSryHHIYYmAwaQgwCoiS4oEHucj1KtMUYJvxzdS
JLi6JzLtWZWFAYY6MSD+f9m6cZY5fSXuNyZ/cQHtF1j5XV0byQ0V3f2s3EPAWj0f
psqZ2jNv8Ih8JqCYJwy6IRCursZEmgzIXdnjIxXJf+aXUuCFVwuBsDIiJrLTliAr
un8k0p2O5QjtT8iguQUmmJgLrIQ7JxOGPtDnMDHZ9GT/fs7HtVBPdZys2L40slGV
BjUT8S7Tj77GhJ5n/OwexRFBdr6UBxUH9KXQMpMwfjbf/u/04G/8yYKwpIoVQBoV
gPjvgFc=
=FOg9
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of fixes that have been gathered since the
previous pull request.
All about device-specific fixes and quirks, and most of them are
pretty small and trivial"
* tag 'sound-fix-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda/realtek: Workaround for resume on Dell Venue 11 Pro 7130
ALSA: hda: Fix headset detection failure due to unstable sort
ALSA: pcm: use new array-copying-wrapper
ASoC: codec: es8316: "DAC Soft Ramp Rate" is just a 2 bit control
ASoC: amd: acp: Fix possible deadlock
firmware: cs_dsp: FW_CS_DSP_KUNIT_TEST should not select REGMAP
ALSA: usb-audio: Add delay quirk for iBasso DC07 Pro
ALSA: hda/realtek: Fix quirk matching for Legion Pro 7
ASoC: renesas: SND_SIU_MIGOR should depend on DMADEVICES
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet 5V
ASoC: da7213: Initialize the mutex
ASoC: use to_platform_device() instead of container_of()
ASoC: acp: Support microphone from Lenovo Go S
ASoC: SOF: imx8m: Add entry for new 8M Plus revision
ASoC: SOF: imx8: Add entries for new 8QM and 8QXP revisions
ASoC: SOF: imx: Add mach entry to select cs42888 topology
dt-bindings: arm: imx: Add board revisions for i.MX8MP, i.MX8QM and i.MX8QXP
ASoC: fsl_asrc_m2m: select CONFIG_DMA_SHARED_BUFFER
ASoC: audio-graph-card2: use correct endpoint when getting link parameters
ASoC: SOF: imx8m: add SAI2,5,6,7
...
A bunch of fixes that came in during the merge window, plus a few new
device IDs. The i.MX changes are a little large since they add some new
quirk data as well as device IDs, and the audio graph card change for
picking the correct endpoint for links is large due to updating a number
of call sites.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeaJV8ACgkQJNaLcl1U
h9ACMgf/RsFePc3B8WcQMDx9jPbC/4+4BMi81lqdQyeC92KT2d5tKqGeBe+kD/MZ
7xW+celVls6GM8Qt87su4cihXMPrIVnxAo9udYwt2GmAwlEdFgWYR2uEYecDzZb6
6X5qqn5vcxDShHoa51NM6mHRzRlNEEcuRa61Ie8TbR9UF5PgpDNnfxj3cVYonTbV
YCXqJH76YtRfO5kDLtvMqk6l9ayiYKGrxmr7XnzMdS4tgg5ERynujxDKMXExxGtj
qBw18fw+8CpOAssVyzGXih2nlESRvHiaaIjRqAZcM9Bxr/mC+w3U3YXbP5CSjk90
xw4pVpwgRODHK9h2UH4VCdsGK6Lk4Q==
=NUFQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.14-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
A bunch of fixes that came in during the merge window, plus a few new
device IDs. The i.MX changes are a little large since they add some new
quirk data as well as device IDs, and the audio graph card change for
picking the correct endpoint for links is large due to updating a number
of call sites.
Max value should be 3, otherwise "DAC Soft Ramp Switch" will be
overwritten by this control.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://patch.msgid.link/20250127150458.1489425-1-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the hdmi-codec driver registers all the formats that are
allowed on the I2S bus. Add i2s_formats field to codec data, to allow
the hdmi codec client to refine the list of the audio I2S formats
actually supported.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108170356.413063-3-olivier.moysan@foss.st.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
* Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI 2.0
- compress-offload API extensions for ASRC support
* ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
* HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual
-----BEGIN PGP SIGNATURE-----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=IBfz
-----END PGP SIGNATURE-----
Merge tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI
2.0
- compress-offload API extensions for ASRC support
ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual"
* tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (235 commits)
ALSA: hda: tas2781-spi: Fix bogus error handling in tas2781_hda_spi_probe()
ALSA: hda: tas2781-spi: Fix error code in tas2781_read_acpi()
ALSA: hda: tas2781-spi: Delete some dead code
ALSA: usb: fcp: Fix return code from poll ops
ALSA: usb: fcp: Fix incorrect resp->opcode retrieval
ALSA: usb: fcp: Fix meter_levels type to __le32
ALSA: hda/realtek: Enable Mute LED on HP Laptop 14s-fq1xxx
ALSA: hda: tas2781-spi: Fix -Wsometimes-uninitialized in tasdevice_spi_switch_book()
ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions
ALSA: hda: tas2781-spi: select CRC32 instead of CRC32_SARWATE
ALSA: usb: fcp: Fix hwdep read ops types
ALSA: scarlett2: Add device_setup option to use FCP driver
ALSA: FCP: Add Focusrite Control Protocol driver
ALSA: hda/tas2781: Add tas2781 hda SPI driver
ALSA: hda/realtek - Fixed headphone distorted sound on Acer Aspire A115-31 laptop
ASoC: xilinx: xlnx_spdif: Simpify using devm_clk_get_enabled()
ALSA: hda: Support for Ideapad hotkey mute LEDs
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83JX, 83MC and 83NM
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83LC
ASoC: dapm: add support for preparing streams
...
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling
-----BEGIN PGP SIGNATURE-----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=5FIc
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There are two external interactions of note, the msm tree pull in some
opp tree, hopefully the opp tree arrives from the same git tree
however it normally does.
There is also a new cgroup controller for device memory, that is used
by drm, so is merging through my tree. This will hopefully help open
up gpu cgroup usage a bit more and move us forward.
There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs.
Then the usual xe/amdgpu/i915/msm leaders and lots of changes and
refactors across the board:
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on
suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine
instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two
SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling"
* tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits)
drm/bridge: fix documentation for the hdmi_audio_prepare() callback
doc/cgroup: Fix title underline length
drm/doc: Include new drm-compute documentation
cgroup/dmem: Fix parameters documentation
cgroup/dmem: Select PAGE_COUNTER
kernel/cgroup: Remove the unused variable climit
drm/display: hdmi: Do not read EDID on disconnected connectors
drm/tests: hdmi: Add connector disablement test
drm/connector: hdmi: Do atomic check when necessary
drm/amd/display: 3.2.316
drm/amd/display: avoid reset DTBCLK at clock init
drm/amd/display: improve dpia pre-train
drm/amd/display: Apply DML21 Patches
drm/amd/display: Use HW lock mgr for PSR1
drm/amd/display: Revised for Replay Pseudo vblank control
drm/amd/display: Add a new flag for replay low hz
drm/amd/display: Remove unused read_ono_state function from Hwss module
drm/amd/display: Do not elevate mem_type change to full update
drm/amd/display: Do not wait for PSR disable on vbl enable
drm/amd/display: Remove unnecessary eDP power down
...
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeOX4sACgkQJNaLcl1U
h9BFQAf/Q4OkXtVsoNMxz0gqOE9nEJXII2pbogssE19cVMF38JgONC1qqIHag+Gj
FR/HBw+WRmdQQHk+tgIYI6AXnD5N47EyJfm6+Ya0y6YGCrzv8AMQkAl1qO8KCZnY
ywVq8uNtximupX3l13KAwUymrRflBJMRticIDBi0M8+NYB7M+qQzjVW4+XF+U5iz
VNMzNQP9JV0dbTuNedHIj8vkvOeS7AMv11VyZ6leZr2Y4yEhIsoTnOfhHkz59/lo
SdBj5ZouoYRjlZs24Snu9rcpz3eLy5/MiSmlD9yJkMUR8aySzmdzAJdreOmakk+k
xk0XHWOa80aG7Gt6I0hugpQJuI5Diw==
=64A0
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.14
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
Use the ARRAY_SIZE() macro to calculate PEB2466_TLV_SIZE and improve the
code's readability.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20250113001001.400669-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no audio output if Speaker volume is set above 25.
According to datasheet Rev 2.5 maximum allowed value for the
Speaker output is 0b11001 (25)
0x6D CLASSD_GAIN_1/ 0x6E CLASSD_GAIN_2:
Left/Right Channel Class-D Driver Gain For DAC Left/Right
Input
(Step size is 1dB.)
00000 = Mute (DEFAULT)
00001 = 0dB
00002 = 1dB
...
11000 = 23dB
11001 = 24dB
So adjust this value in accordance with the datasheet.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://patch.msgid.link/20241219042227.7075-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmd7BBQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGfEEH/3oyTWmD5DPX2lLp
SujyKrEs6bfMQTKKYHzuy8OvzDXkBpZiKXIsCgjF5sXwQVgB7KPfJwgjt5xLo3F3
NTehLGwII7bM8mSq3wHDMeNkyBle4VYA9XOR8tXj21j7aRt9S4U/vtXiYeD9BWhC
Y1p+1FXKfZf7TjNpu8lIl+zLjSFDjYwM8h72dIuHnrYeuFL88fnWwoNP/MFkk5Kk
ce3ol3EtFe/M4GbVOm7KfzEkbsEE6ES60O0suxwYDn+71EA6ExVHFBKqpQvfj71/
ynxWYIwMoiCZWtJ+ali1g/ms0OxG+ivH8+xasBYTcDICZMe/XGX5Yx+Wm5DH5/Ev
pGMyvbI=
=yrc7
-----END PGP SIGNATURE-----
Merge tag 'v6.13-rc6' into drm-next
This backmerges Linux 6.13-rc6 this is need for the newer pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This ensures codec will resume after suspending during playback.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250109093822.5745-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from wangweidong.a@awinic.com:
Add the awinic,aw88083 property to support the aw88083 chip.
The driver is for amplifiers aw88083 of Awinic Technology
Corporation. The AW88083 is an intelligent digital audio
amplifier with low noise.
The ALC5682I-VD and ALC5682I-VE use the same I2C
codec driver with different calibration settings.
This patch aims to handle their differences.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://patch.msgid.link/20241225094307.3678837-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hard-coded strings by using the str_enabled_disabled() helper
function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107011355.2035-1-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
For 48Mhz MCLK systems the calculation of the HW rate is broken,
and will not produce even one sane rate. Since es83xx supports
the option to halve MCLK, calculate also rates with MCLK/2.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://patch.msgid.link/20241227202751.244954-1-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
The root cause is that TAS2781 internal register is not unlocked
before writing data into TAS2781_PRM_TEST_57_REG.
Fixes: 49e2e353fb ("ASoC: tas2781: Add Calibration Kcontrols for Chromebook")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20241227074909.1974-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is for amplifiers aw88083 of Awinic Technology
Corporation. The AW88083 is an intelligent digital audio
amplifier with low noise.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://patch.msgid.link/20241231125610.465614-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The no_capture_mute flag might differ from platform to platform,
especially in the case of the wrapping implementations, like the
upcoming DRM HDMI Codec framework. Move the flag next to all other flags
in struct hdmi_codec_pdata.
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-2-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The upcoming DRM connector HDMI codec implementation is going to use
codec-specific data in the .get_dai_id to get drm_connector. Pass data
to the callback, as it is done with other hdmi_codec_ops callbacks.
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-1-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The calibration procedure needs some time to finish.
This patch adds the delay time to ensure the calibration procedure is completed correctly.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20241218091307.96656-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The header clearly states that it does not want to be included directly,
only via '<linux/bitmap.h>'. Replace the include accordingly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241217070545.2533-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_to_sdw() has been unused since it was added in 2020 as part of the
commit d1ede0641b ("ASoC: rt715: add RT715 codec driver")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241216135110.53426-1-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
One specific test condition: the default registers of p[j].reg ~
p[j+3].reg are 0, TASDEVICE_REG(0x00, 0x14, 0x38)(PLT_FLAG_REG),
TASDEVICE_REG(0x00, 0x14, 0x40)(SINEGAIN_REG), and
TASDEVICE_REG(0x00, 0x14, 0x44)(SINEGAIN2_REG). After first calibration,
they are freshed to TASDEVICE_REG(0x00, 0x1a, 0x20), TASDEVICE_REG(0x00,
0x16, 0x58)(PLT_FLAG_REG), TASDEVICE_REG(0x00, 0x14, 0x44)(SINEGAIN_REG),
and TASDEVICE_REG(0x00, 0x16, 0x64)(SINEGAIN2_REG) via "Calibration Start"
kcontrol. In second calibration, the p[j].reg ~ p[j+3].reg have already
become tas2781_cali_start_reg. However, p[j+2].reg, TASDEVICE_REG(0x00,
0x14, 0x44)(SINEGAIN_REG), will be freshed to TASDEVICE_REG(0x00, 0x16,
0x64), which is the third register in the input params of the kcontrol.
This is why only first calibration can work, the second-time, third-time
or more-time calibration always failed without reboot. Of course, if no
p[j].reg is in the list of tas2781_cali_start_reg, this stress test can
work well.
Fixes: 49e2e353fb ("ASoC: tas2781: Add Calibration Kcontrols for Chromebook")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20241211043859.1328-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-21-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-20-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-19-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-18-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-17-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-16-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-15-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-14-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-13-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-12-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-11-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-10-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-9-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-8-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-7-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-6-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-5-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-4-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-3-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-2-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-1-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Number of DAIs in the codec is not really a binding, because it could
grow, e.g. when we implement missing features. Add the define to the
driver, which will replace the one in the binding header.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241209094442.38900-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") changes the arguments for various module symbol macros
including some that we've aded new uses for. Merge the commit up to
avoid problems in -next.
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
This series prepares for dissimilar aggregation of CS42L43 + CS35L56
speaker playback. The CS35L56 SoundWire DAI is split into separate
DAIs for playback and capture so they can be routed and aggregated
differently.
The cs_amp driver is also updated to enable different TX (capture)
slots on each CS35L56 on a bus, so that the captures can be aggregated.
We should use *-y instead of *-objs in Makefile for the module
objects. *-objs is used rather for host programs.
Fixes: 313e978df7 ("ASoC: codecs: wcd937x: add audio routing and Kconfig")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241203141823.22393-6-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use *-y instead of *-objs in Makefile for the module
objects. *-objs is used rather for host programs.
Fixes: 250304a0fb ("ASoC: cs42l84: Add new codec driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241203141823.22393-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use *-y instead of *-objs in Makefile for the module
objects. *-objs is used rather for host programs.
Fixes: c486def5b3 ("ASoC: cs40l50: Support I2S streaming to CS40L50")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241203141823.22393-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch splits the SoundWire capture DP into a separate DAI so that
it can be independently routed and/or aggregated. It also makes
corresponding changes to the SOF SoundWire machine driver.
The playback and capture over SoundWire are separate DPs so don't have to
route to the same place. They could also be aggregated differently - for
example the playback DP could be aggregated with a playback-only DAI on
a codec.
No production device currently uses the capture path and their topologies
do not connect it. So there is no need to change the machine driver match
table entries for these. They will simply drop the unused capture DAI.
There is one hookup used for a non-production development board that was
added by commit 05fe628428 ("ASoC: Intel: soc-acpi-intel-mtl-match: add
acpi match table for cdb35l56-eight-c") This is the only hookup using a
topology that connects the SoundWire DP for capture, so this hookup has
been changed to include an aggregated endpoint for the capture DAI.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241203104534.56719-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241202113641.1003836-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct i2c_device_id' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
While at it, also add some space to be consistent with cs42l51_of_match a
few lines below.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
1551 384 16 1951 79f sound/soc/codecs/cs42l51-i2c.o
After:
=====
text data bss dec hex filename
1631 304 16 1951 79f sound/soc/codecs/cs42l51-i2c.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/d5e686f47eddb14245d0fde693ff77ae749f7a08.1731689646.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
tps65010, have undergone minor code improvements to enhance consistency and
fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0 capability
for consistent register map configuration across syscons of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced regulator
put and ensure proper synchronization during driver removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant improvements,
including the use of IRQ domains for various devices, fixing IRQ domain names
duplication, and code refactoring for better consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break statement in
the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver, along
with ensuring a clear relationship between IDs and model names, and allowing
multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved power
management.
- The adp5585 driver has reduced its dependencies by dropping the obsolete
dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397 driver,
expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name from
IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing regmap_del_irq_chip()
in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML format
for better readability and maintainability.
-----BEGIN PGP SIGNATURE-----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=YP3r
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
The ordering in hdmi_codec_get_ch_alloc_table_idx() results in
wrong channel allocation for a number of cases, e.g. when ELD
reports FL|FR|LFE|FC|RL|RR or FL|FR|LFE|FC|RL|RR|RC|RLC|RRC:
ca_id 0x01 with speaker mask FL|FR|LFE is selected instead of
ca_id 0x03 with speaker mask FL|FR|LFE|FC for 4 channels
and
ca_id 0x04 with speaker mask FL|FR|RC gets selected instead of
ca_id 0x0b with speaker mask FL|FR|LFE|FC|RL|RR for 6 channels
Fix this by reordering the channel allocation list with most
specific speaker masks at the top.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://patch.msgid.link/20241115044344.3510979-1-christianshewitt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from "Hendrik v. Raven" <h.v.raven@merzmedtech.de>:
This series adds support for the idle-state property from the mux
framework to the simple-mux audio variant. It allows to specify the state
of the mux when it is not in use.
When firmware loading is disabled, gcc warns that the local
'fw' variable fails to get initialized:
sound/soc/codecs/sma1307.c: In function 'sma1307_setting_loaded.isra':
sound/soc/codecs/sma1307.c:1717:12: error: 'fw' is used uninitialized [-Werror=uninitialized]
1717 | if (!fw) {
| ^
sound/soc/codecs/sma1307.c:1712:32: note: 'fw' was declared here
1712 | const struct firmware *fw;
Check the return code from request_firmware() to ensure that the
firmware is correctly set, and drop the incorrect release_firmware()
on that uninitialized data.
Fixes: 576c57e6b4 ("ASoC: sma1307: Add driver for Iron Device SMA1307")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241113175734.2443315-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
So far the mux changes it state immediately, even when not in use. Allow
overriding this behaviour by specifying an optional idle-state. This
state is used whenever the mux is powered down, only switching to the
selected state on power up. If unspecified it defaults to as-is,
maintaining the previous behaviour.
Signed-off-by: Hendrik v. Raven <h.v.raven@merzmedtech.de>
Link: https://patch.msgid.link/20241114-simple-mux-idle-state-v2-1-a30cb37d2be2@merzmedtech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The max9768 has a custom control for playback mute which unconditionally
returns 0 from the put() operation, rather than returning 1 on change to
ensure notifications are generated to userspace. Check to see if the value
has changed and return appropriately.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20241112-asoc-max9768-event-v1-1-ba5d50599787@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This codec only has one set of left and right DACs, remove the duplicate
DACs with duplicated bits controlling them as the userspace can set those
controls to mismatched value. This most likely does break userspace ABI,
but there seem to be no in-kernel users.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20241108235453.196289-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function sma1307_dai_hw_params_amp, the variable
'ret' has not been assigned a value, so the logical judgement
is invalid, thus fix it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241108011617.2284-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to DA7212 HW manual, the codec's PLL input divider can operate
with MCLK range from 2MHz to 50MHz but current driver only set the
minimum supported MCLK frequency to 5MHz. That cause 11.025kHz audio
which is corresponding to MCLK of 2.8224MHz (11.025kHz * 256) unable to
play in case audio-simple-card is used.
Signed-off-by: Hao Bui <hao.bui.yg@renesas.com>
Co-developed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-27-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When audio stream is closing, audio frequency is set to 0 by ALSA but
codec driver DA7213 does not handle properly in this case. This patch
adds checking of 0Hz frequency to da7213_set_component_sysclk() and avoid
unnecessary PLL settings.
Signed-off-by: Hao Bui <hao.bui.yg@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-26-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return directly the value of the regcache_sync() in
da7213_runtime_resume(). In case of any failures this will inform the
runtime resume process.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-24-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the Renesas RZ/G3S SMARC Carrier II board having a DA7212 codec (using
da7213 driver) connected to one SSIF-2 available on the Renesas RZ/G3S SoC
it has been discovered that using the runtime PM API for suspend/resume
(as will be proposed in the following commits) leads to the codec not
being propertly initialized after resume. This is because w/o
max_register populated to regmap_config the regcache_rbtree_sync()
breaks on base_reg > max condition and the regcache_sync_block() call is
skipped.
Fixes: ef5c2eba24 ("ASoC: codecs: Add da7213 codec")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-23-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from wangweidong.a@awinic.com:
Add the awinic,aw88081 property to support the aw88081 chip.
The driver is for amplifiers aw88081 of Awinic Technology
Corporation. The awinic AW88081 is an I2S/TDM input,
high efficiency digital Smart K audio amplifier
An atomicity violation occurs when the validity of the variables
da7219->clk_src and da7219->mclk_rate is being assessed. Since the entire
assessment is not protected by a lock, the da7219 variable might still be
in flux during the assessment, rendering this check invalid.
To fix this issue, we recommend adding a lock before the block
if ((da7219->clk_src == clk_id) && (da7219->mclk_rate == freq)) so that
the legitimacy check for da7219->clk_src and da7219->mclk_rate is
protected by the lock, ensuring the validity of the check.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: 6d817c0e9f ("ASoC: codecs: Add da7219 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Link: https://patch.msgid.link/20240930101216.23723-1-chenqiuji666@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is for amplifiers aw88081 of Awinic Technology
Corporation. The awinic AW88081 is an I2S/TDM input,
high efficiency digital Smart K audio amplifier
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Reviewed-by: anish kumar <yesanishhere@gmail.com>
Link: https://patch.msgid.link/20241024090324.131731-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC CODEC driver masks the IRQs whilst entering and exiting
system suspend to avoid issues where the IRQ handler can run but PM
runtime is disabled. However, as the IRQs could also be used from
other parts of the driver, it would be better to move this handling to
the MFD level.
Remove the handling from the ASoC driver and move it to the MFD
driver. Whilst moving also ensure the IRQs are all masked at the device
level before powering down the device, as per hardware recommendations.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org.>
Link: https://lore.kernel.org/r/20241014095202.828194-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
struct adau1373_platform_data" was not being used by any platform.
Hence, drop it and move to firmware based support. All the
configurations quirks present in the platform_data are now supported as
firmware properties.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241028-adau1373-shutdown-v2-3-647f56bbd182@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On a system with wcd937x, rxmacro and Qualcomm audio DSP, which is pretty
common set of devices on Qualcomm platforms, and due to the order of how
DAPM widgets are powered on (they are sorted), there is a small time window
when wcd937x chip is online and expects the flow of incoming data but
rxmacro is not yet online. When wcd937x is programmed to receive data
via AUX port then its AUX PDM watchdog is enabled in
wcd937x_codec_enable_aux_pa(). If due to some reasons the rxmacro and
soundwire machinery are delayed to start streaming data, then there is
a chance for this AUX PDM watchdog to reset the wcd937x codec. Such event
is not logged as a message and only wcd937x IRQ counter is increased
however there could be a lot of other reasons for that IRQ.
There is a similar opportunity for such delay during DAPM widgets power
down sequence.
If wcd937x codec reset happens on the start of the playback, then there
will be no sound and if such reset happens at the end of a playback then
it may generate additional clicks and pops noises.
On qrb4210 RB2 board without any debugging bits the wcd937x resets are
sometimes observed at the end of a playback though not always.
With some debugging messages or with some tracing enabled the AUX PDM
watchdog resets the wcd937x codec at the start of a playback and there
is no sound output at all.
In this patch:
- TIMEOUT_SEL bit in PDM_WD_CTL2 register is set to increase the watchdog
reset delay to 100ms which eliminates the AUX PDM watchdog IRQs on
qrb4210 RB2 board completely and decreases the number of unwanted clicks
noises;
- HOLD_OFF bit postpones triggering such watchdog IRQ till wcd937x codec
reset which usually happens at the end of a playback. This allows to
actually output some sound in case of debugging.
Cc: Adam Skladowski <a39.skl@gmail.com>
Cc: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Cc: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20241022033132.787416-3-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The wcd937x supports also AUX input but the control that sets correct
soundwire port for this is missing. This control is required for audio
playback, for instance, on qrb4210 RB2 board as well as on other
SoCs.
Reported-by: Adam Skladowski <a39.skl@gmail.com>
Reported-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Suggested-by: Adam Skladowski <a39.skl@gmail.com>
Suggested-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20241022033132.787416-2-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of of_match_ptr() is incorrect here and just causes
a warning:
sound/soc/codecs/cs42l84.c:1084:34: error: unused variable 'cs42l84_of_match' [-Werror,-Wunused-const-variable]
Fixes: 250304a0fb ("ASoC: cs42l84: Add new codec driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241029092404.3874040-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Because we designed a new version of ES8326, the configuration of
micbias needed to be modified.We tested the new driver,
on both the new version and the old one. It works well.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20241028060529.3359-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If devm_gpiod_get_optional() fails, we need to disable previously enabled
regulators, as done in the other error handling path of the function.
Also, gpiod_set_value_cansleep(, 1) needs to be called to undo a
potential gpiod_set_value_cansleep(, 0).
If the "reset" gpio is not defined, this additional call is just a no-op.
This behavior is the same as the one already in the .remove() function.
Fixes: 11b9cd748e ("ASoC: cs42l51: add reset management")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/a5e5f4b9fb03f46abd2c93ed94b5c395972ce0d1.1729975570.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from James Calligeros <jcalligeros99@gmail.com>:
This patch set adds a driver for the Cirrus Logic CS42L84 codec. This chip
is (so far) found only on Apple Silicon Macs. In keeping with proud Apple
tradition, the CS42L84 is essentially just a CS42L42 with a different
regmap and no publicly available datasheet. It may also be missing its
parent's S/PDIF capabilities as none of Apple's devices support S/PDIF out,
however this cannot be positively confirmed.
This driver has lived in the downstream Asahi tree for quite a while now,
and gained some refinements along the way. I have squashed most of these
into the initial driver commit as they were small changes like tweaking
msleep()s or filling out TLVs, but left seperate a larger change to
tip/ring sense IRQ handling as it differs significantly from what is found
in the CS42L42 driver.
Some jacks integrated on devices with this codec, such as certain
Apple Silicon Macs, have quite trigger-happy tip sense switches that
cause a tip sense IRQ before the plug is fully seated. If users are
unfortunate with their timing, this can lead to headsets being detected
as mic-less headphones among other issues with the codec's device
detection routines.
Introduce some rudimentary ring sense interrupt handling so that we
can re-trigger the codec's detection routines when we are certain
that the plug is fully seated.
This seems to differ from what other Cirrus drivers do, but is
necessary for devices to be reliably detected properly here.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://patch.msgid.link/20241020-cs42l84-v2-3-37ba2b6721d9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS42L84 is a codec from Cirrus Logic found in Apple Silicon Macs.
The chip continues Apple's long tradition of compelling vendors to
spin out bespoke SKUs that are based on existing IP but made subtly
incompatible with the publicly available part. CS42L84 is very similar
to CS42L42, but has a different regmap.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://patch.msgid.link/20241020-cs42l84-v2-2-37ba2b6721d9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the mismatch between function parameter and description.
Below warning are reported with W=1.
warning: Function parameter or struct member 'val' not described in
'rt_sdca_index_update_bits'
warning: Excess function parameter 'value' description in
'rt_sdca_index_update_bits'
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20241024060205.20201-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return values from both regmap_raw_read() and regmap_raw_write() are not
checked despite they can fail. Propagate possible errors to caller.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Link: https://patch.msgid.link/20241018110743.18786-1-v.shevtsov@maxima.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Turns out some registers of pre-2.5 version of rxmacro codecs are not
located at the expected offsets but 0xc further away in memory. So far
the detected registers are CDC_RX_RX2_RX_PATH_SEC7 and
CDC_RX_RX2_RX_PATH_DSM_CTL.
CDC_RX_RXn_RX_PATH_DSM_CTL(rx, n) macro incorrectly generates the address
0x540 for RX2 but it should be 0x54C and it also overwrites
CDC_RX_RX2_RX_PATH_SEC7 which is located at 0x540.
The same goes for CDC_RX_RXn_RX_PATH_SEC7(rx, n).
Fix this by introducing additional rxn_reg_stride2 offset. For 2.5 version
and above this offset will be equal to 0.
With such change the corresponding RXn() macros will generate the same
values for 2.5 codec version for all RX paths and the same old values
for pre-2.5 version for RX0 and RX1. However for the latter case with
RX2 path it will also add rxn_reg_stride2 on top.
While at this, also remove specific if-check for INTERP_AUX from
rx_macro_digital_mute() and rx_macro_enable_interp_clk(). These if-check
was used to handle such special offset for AUX interpolator but since
CDC_RX_RXn_RX_PATH_SEC7(rx, n) and CDC_RX_RXn_RX_PATH_DSM_CTL(rx, n)
macros will generate the correst addresses of dsm register, they are no
longer needed.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20241016221049.1145101-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We shouldn't do any devm_ based allocation in the io_init(), this need
to happen in the probe(). Luckily, we now have an SDCA helper to look
in ACPI tables if a SMART_MIC function is exposed.
FIXME: the registers are not well handled today, the regmap lists
registers which are not really supported in all platforms. The regmap
needs to throw an error if those registers are accessed without
existing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If det_mode is not 0, 3 or 5 then function will return
jack_type with an uninitialzed value.
Enhance switch case to prevent uninitialized variable issue.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/8631337239d744088d56caab2d8f39cb@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable slot_found is being initialized to zero and inside
a for-loop is being checked if it's reached MAX_NUM_CH, however,
this is currently impossible since slot_found is never changed.
In a previous loop a similar coding pattern is used and slot_found
is being incremented. It appears the increment of slot_found is
missing from the loop, so fix the code by adding in the increment.
Fixes: 6a8e1d46f0 ("ASoC: max98388: add amplifier driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241010182032.776280-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function es8323_i2c_probe(), devm_kzalloc() could
possibly return NULL pointer, so IS_ERR() is wrong check
in this place, thus fix it.
Fixes: b97391a604 ("ASoC: codecs: Add support for ES8323")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241011073115.2384-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As the same condition was checked in inner and outer if
statements. The code never reaches the inner else statement.
This issue was reported by Coverity Scan with CID = 1600271.
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Link: https://patch.msgid.link/20241008234422.5274-1-everestkc@everestkc.com.np
Signed-off-by: Mark Brown <broonie@kernel.org>
Added proper error handling for register value check that
return -EPERM when register value does not meet expected condition
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241009073938.7472-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Binbin Zhou <zhoubinbin@loongson.cn>:
This patch set is mainly about Loongson i2s related issues.
Please allow me to briefly explain this patch set:
Patch 1-2: Add ES8323 codec required on Loongson-2K2000
Patch 3-4: Add uda1342 codec required on Loongson-2K1000
Patch 5: Fix the problem of unable to detect codec under FDT system.
Patch 6-7: Add Loongson i2s platform device support
Added proper error handling for register value check that
return -EPERM when register value does not meet expected condition
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241008025923.10606-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the initial codec driver for rt721-sdca.
It's a three functions (jack,mic,amp) soundwire driver.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
v2: Fix typo in mbq default registers.
v3: Include soundwire common functions for Realtek.
Link: https://patch.msgid.link/d18b35f8b6934fc6a2be6c4458a63fe5@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An unsigned value held by offset can never be
negative, so this test will always evaluate
the same way and is therefore redundant.
Signed-off-by: Advait Dhamorikar <advaitdhamorikar@gmail.com>
Link: https://patch.msgid.link/20241004141046.61265-1-advaitdhamorikar@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec.
-----BEGIN PGP SIGNATURE-----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=RpGO
-----END PGP SIGNATURE-----
Merge tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Since commit b4b8183055 ("slimbus: generate MODULE_ALIAS() from
MODULE_DEVICE_TABLE()"), modpost automatically generates MODULE_ALIAS()
from MODULE_DEVICE_TABLE(slim, ).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patch.msgid.link/20241002151436.43684-1-masahiroy@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Igor Prusov <ivprusov@salutedevices.com>:
This series adds support for two NeoFidelity amplifiers. For both
amplifiers vendor provides software for equalizer and filters
configuration, which generates firmware files with registers values.
Since in both cases those files have same encoding, a common helper
module is added to get firmware via request_firmware() API and set
registers values.
Merge series from Javier Carrasco <javier.carrasco.cruz@gmail.com>:
Declare `snd_soc_component_driver` as const to move their declarations
to read-only sections for the drivers that do not modify the struct
after its declaration.
Apart from a single case under media/, the affected drivers are members
of the ASoC subsystem.
Merge series from Hongbo Li <lihongbo22@huawei.com>:
Many variable in macro are not used as we used macro_check
script to detect and mamually check, let us address these
issues.
>> sound/soc/codecs/rt1320-sdw.c:564:14:
warning: result of comparison of constant 4295491583 with expression of type 'unsigned int' is always false
[-Wtautological-constant-out-of-range-compare]
564 | if (addr > 0x10007ffff || addr < 0x10007000) {
| ~~~~ ^ ~~~~~~~~~~~
1 warning generated.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410011159.InLKFd40-lkp@intel.com/
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20241001071836.3719162-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patch.msgid.link/6a6c87d3-9e4f-4980-ae06-b0d5e16dd0c0@web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
