Add utility API cfg80211_get_radio_idx_by_chan() to retrieve the radio
index corresponding to a given channel in a multi-radio wiphy.
This utility function can be used when we want to check the radio-specific
data for a channel in a multi-radio wiphy. For example, it can help
determine the radio index required to handle a scan request. This index
can then be used to decide whether the scan can proceed without
interfering with ongoing DFS operations on another radio.
Signed-off-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-1-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As discussesd before in [0] proxy entries (which are more configuration
than runtime data) should stay when the link (carrier) goes does down.
This is what happens for regular neighbour entries.
So lets fix this by:
- storing in proxy entries the fact that it was added as NUD_PERMANENT
- not removing NUD_PERMANENT proxy entries when the carrier goes down
(same as how it's done in neigh_flush_dev() for regular neigh entries)
[0]: https://lore.kernel.org/netdev/c584ef7e-6897-01f3-5b80-12b53f7b4bf4@kernel.org/
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250617141334.3724863-1-nico.escande@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If any of the HWC commands are not recognized by the
underlying hardware, the hardware returns the response
header status of -1. Log the information using
netdev_info_once to avoid multiple error logs in dmesg.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.
The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.
These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.
Before:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
After:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 16000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for net_shaper_ops in the MANA driver,
enabling configuration of rate limiting on the MANA NIC.
To apply rate limiting, the driver issues a HWC command via
mana_set_bw_clamp() and updates the corresponding shaper object
in the net_shaper cache. If an error occurs during this process,
the driver restores the previous speed by querying the current link
configuration using mana_query_link_cfg().
The minimum supported bandwidth is 100 Mbps, and only values that are
exact multiples of 100 Mbps are allowed. Any other values are rejected.
To remove a shaper, the driver resets the bandwidth to the maximum
supported by the SKU using mana_set_bw_clamp() and clears the
associated cache entry. If an error occurs during this process,
the shaper details are retained.
On the hardware that does not support these APIs, the net-shaper
calls to set speed would fail.
Set the speed:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do set --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' },
"bw-max": 200000000 }'
Get the shaper details:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do get --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' }}'
> {'bw-max': 200000000,
> 'handle': {'scope': 'netdev'},
> 'ifindex': $IFINDEX,
> 'metric': 'bps'}
Delete the shaper object:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do delete --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev","id":'$ID' }}'
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a new device generic parameter to enable/disable the
PHC (PTP Hardware Clock) functionality in the device associated
with the devlink instance.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250617110545.5659-6-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers that are using ops lock and don't depend on RTNL lock
still need to manage it because udp_tunnel's RTNL dependency.
Introduce new udp_tunnel_nic_lock and use it instead of
rtnl_lock. Drop non-UDP_TUNNEL_NIC_INFO_MAY_SLEEP mode from
udp_tunnel infra (udp_tunnel_nic_device_sync_work needs to
grab udp_tunnel_nic_lock mutex and might sleep).
Cover more places in v4:
- netlink
- udp_tunnel_notify_add_rx_port (ndo_open)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_notify_del_rx_port (ndo_stop)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_get_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- udp_tunnel_drop_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- udp_tunnel_nic_reset_ntf (ndo_open)
- notifiers
- udp_tunnel_nic_netdevice_event, depending on the event:
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- ethnl_tunnel_info_reply_size
- udp_tunnel_nic_set_port_priv (two intel drivers)
Cc: Michael Chan <michael.chan@broadcom.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-4-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
libeth: add libeth_xdp helper lib
Alexander Lobakin says:
Time to add XDP helpers infra to libeth to greatly simplify adding
XDP to idpf and iavf, as well as improve and extend XDP in ice and
i40e. Any vendor is free to reuse helpers. If this happens, I'm fine
with moving the folder of out intel/.
The helpers greatly simplify building xdp_buff, running a prog,
handling the verdict, implement XDP_TX, .ndo_xdp_xmit, XDP buffer
completion. Same applies to XSk (with XSk xmit instead of
.ndo_xdp_xmit, plus stuff like XSk wakeup).
They are entirely generic with no HW definitions or assumptions.
HW-specific stuff like parsing Rx desc / filling Tx desc is passed
from the driver as inline callbacks.
For now, key assumptions that optimize performance / avoid code
bloat, but might not fit every driver in driver/net/:
* netmem holding the buffers are always order-0;
* driver has separate XDP Tx queues, doesn't use stack queues for
that. For best efficiency, you may want to have nr_cpu_ids XDP
queues, but less (queue sharing) is also supported;
* XDP Tx queues are interrupt-less and use "lazy" cleaning only
when there are less than 1/4 free Tx descriptors of the queue
size;
* main target platforms are 64-bit, although 32-bit is also fully
supported, but the code might be not as optimized for them.
Library code already supports multi-buffer for all kinds of Tx and
both header split and no split for Rx and Tx. Frags can come from
devmem/io_uring etc., direct `struct page *` is used only for header
buffers for which it's always true.
Drivers are free to pass their own Rx hints and XSK xmit hints ops.
XDP_TX and ndo_xdp_xmit use onstack bulk for the frames to be sent
and send them by batches of 16 buffers. This eats ~280 bytes on the
stack, but gives good boosts and allow to greatly optimize the main
sending function leaving it without any error/exception paths.
XSk xmit fills Tx descriptors in the loop unrolled by 8. This was
proven to improve perf on ice and i40e. XDP_TX and ndo_xdp_xmit
doesn't use unrolling as I wasn't able to get any improvements in
those scenenarios from this, while +1 Kb for their sending functions
for nothing doesn't sound reasonable.
XSk wakeup, instead of traditionally used "SW interrupts" provided
by NICs, uses IPI to schedule NAPI on the CPU corresponding to the
given queue pair. It gives better control over CPU distribution and
in general performs way better than "SW interrupts", plus allows us
to not pass any HW-specific callbacks there.
The code is built the way that all callbacks passed from drivers
get inlined; in general, most of hotpath gets inlined. Everything
slow/exception lands to .c files in the libeth folder, doesn't
create copies in the drivers themselves and doesn't overloat
hotpath.
Sure, inlining means that hotpath will be compiled into every driver
that uses the lib, but the core code is written in one place, so no
copying of bugs happens. Fixed once -- works everywhere.
The last commit might look like sorta hack, but it gives really good
boosts and decreases object code size, plus there are checks that
all those wider accesses are fully safe, so I don't feel anything
bad about it.
An example of using libeth_xdp can be found either on my GitHub or
on the mailing lists here ("XDP for idpf"). Macros for building
driver XDP functions lead to that some implementations (XDP_TX,
ndo_xdp_xmit etc.) consist of really only a few lines.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
libeth: xdp, xsk: access adjacent u32s as u64 where applicable
libeth: xsk: add XSkFQ refill and XSk wakeup helpers
libeth: xsk: add XSk Rx processing support
libeth: xsk: add XSk xmit functions
libeth: xsk: add XSk XDP_TX sending helpers
libeth: xdp: add RSS hash hint and XDP features setup helpers
libeth: xdp: add templates for building driver-side callbacks
libeth: xdp: add XDP prog run and verdict result handling
libeth: xdp: add helpers for preparing/processing &libeth_xdp_buff
libeth: xdp: add XDPSQ cleanup timers
libeth: xdp: add XDPSQ locking helpers
libeth: xdp: add XDPSQE completion helpers
libeth: xdp: add .ndo_xdp_xmit() helpers
libeth: xdp: add XDP_TX buffers sending
libeth: support native XDP and register memory model
libeth: convert to netmem
libeth, libie: clean symbol exports up a little
====================
Link: https://patch.msgid.link/20250616201639.710420-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the netmem counterpart of page_pool_dev_alloc_pages() which
uses the default GFP flags for RX.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts TCP Small Queues implementation from tasklet to BH
workqueue.
Semantically, this is an equivalent conversion and there shouldn't be any
user-visible behavior changes. While workqueue's queueing and execution
paths are a bit heavier than tasklet's, unless the work item is being queued
every packet, the difference hopefully shouldn't matter.
My experience with the networking stack is very limited and this patch
definitely needs attention from someone who actually understands networking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/aFBeJ38AS1ZF3Dq5@slm.duckdns.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Locally-generated MC packets have so far not been subject to MC routing.
Instead an MC-enabled installation would maintain the MC routing tables,
and separately from that the list of interfaces to send packets to as part
of the VXLAN FDB and MDB.
In a previous patch, a ip_mr_output() and ip6_mr_output() routines were
added for IPv4 and IPv6. All locally generated MC traffic is now passed
through these functions. For reasons of backward compatibility, an SKB
(IPCB / IP6CB) flag guards the actual MC routing.
This patch adds logic to set the flag, and the UAPI to enable the behavior.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/d899655bb7e9b2521ee8c793e67056b9fd02ba12.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6tunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IP6CB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel6_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IPv6 multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/acb4f9f3e40c3a931236c3af08a720b017fbfbfb.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function always returns zero, thus the return value does not carry any
signal. Just make it void.
Most callers already ignore the return value. However:
- Refold arguments of the call from sctp_v6_xmit() so that they fit into
the 80-column limit.
- tipc_udp_xmit() initializes err from the return value, but that should
already be always zero at that point. So there's no practical change, but
elision of the assignment prompts a couple more tweaks to clean up the
function.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/7facacf9d8ca3ca9391a4aee88160913671b868d.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multicast routing is today handled in the input path. Locally generated MC
packets don't hit the IPMR code today. Thus if a VXLAN remote address is
multicast, the driver needs to set an OIF during route lookup. Thus MC
routing configuration needs to be kept in sync with the VXLAN FDB and MDB.
Ideally, the VXLAN packets would be routed by the MC routing code instead.
To that end, this patch adds support to route locally generated multicast
packets. The newly-added routines do largely what ip_mr_input() and
ip_mr_forward() do: make an MR cache lookup to find where to send the
packets, and use ip_mc_output() to send each of them. When no cache entry
is found, the packet is punted to the daemon for resolution.
However, an installation that uses a VXLAN underlay netdevice for which it
also has matching MC routes, would get a different routing with this patch.
Previously, the MC packets would be delivered directly to the underlay
port, whereas now they would be MC-routed. In order to avoid this change in
behavior, introduce an IPCB flag. Only if the flag is set will
ip_mr_output() actually engage, otherwise it reverts to ip_mc_output().
This code is based on work by Roopa Prabhu and Nikolay Aleksandrov.
Signed-off-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/0aadbd49330471c0f758d54afb05eb3b6e3a6b65.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iptunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IPCB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IP multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Trivial fix to a couple of outdated netmem comments. No code changes,
just more accurately describing current code.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250615203511.591438-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for legacy Broadcom FCS tags, which are similar to
DSA_TAG_PROTO_BRCM_LEGACY.
BCM5325 and BCM5365 switches require including the original FCS value and
length, as opposed to BCM63xx switches.
Adding the original FCS value and length to DSA_TAG_PROTO_BRCM_LEGACY would
impact performance of BCM63xx switches, so it's better to create a new tag.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-3-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have removed the RFC3517/RFC6675 hints,
tcp_clear_retrans_hints_partial() is empty, and can be removed.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-4-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that obsolete RFC3517/RFC6675 TCP loss detection has been removed,
we can remove the somewhat complex and intrusive code to maintain its
hint state: lost_skb_hint and lost_cnt_hint.
This commit makes tcp_clear_retrans_hints_partial() empty. We will
remove tcp_clear_retrans_hints_partial() and its call sites in the
next commit.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-3-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Begunkov says:
====================
io_uring cmd for tx timestamps (part)
Apply the networking helpers for the io_uring timestamp API.
====================
Link: https://patch.msgid.link/cover.1750065793.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shradha Gupta says:
====================
Allow dyn MSI-X vector allocation of MANA
In this patchset we want to enable the MANA driver to be able to
allocate MSI-X vectors in PCI dynamically.
The first patch exports pci_msix_prepare_desc() in PCI to be able to
correctly prepare descriptors for dynamically added MSI-X vectors.
The second patch adds the support of dynamic vector allocation in
pci-hyperv PCI controller by enabling the MSI_FLAG_PCI_MSIX_ALLOC_DYN
flag and using the pci_msix_prepare_desc() exported in first patch.
The third patch adds a detailed description of the irq_setup(), to
help understand the function design better.
The fourth patch is a preparation patch for mana changes to support
dynamic IRQ allocation. It contains changes in irq_setup() to allow
skipping first sibling CPU sets, in case certain IRQs are already
affinitized to them.
The fifth patch has the changes in MANA driver to be able to allocate
MSI-X vectors dynamically. If the support does not exist it defaults to
older behavior.
* 'shradha_v6.16-rc1' of https://github.com/shradhagupta6/linux:
net: mana: Allocate MSI-X vectors dynamically
net: mana: Allow irq_setup() to skip cpus for affinity
net: mana: explain irq_setup() algorithm
PCI: hv: Allow dynamic MSI-X vector allocation
PCI/MSI: Export pci_msix_prepare_desc() for dynamic MSI-X allocations
====================
Link: https://patch.msgid.link/1749650984-9193-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the MANA driver allocates MSI-X vectors statically based on
MANA_MAX_NUM_QUEUES and num_online_cpus() values and in some cases ends
up allocating more vectors than it needs. This is because, by this time
we do not have a HW channel and do not know how many IRQs should be
allocated.
To avoid this, we allocate 1 MSI-X vector during the creation of HWC and
after getting the value supported by hardware, dynamically add the
remaining MSI-X vectors.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
To collaborate with hardware servicing events, upon receiving the special
EQE notification from the HW channel, remove the devices on this bus.
Then, after a waiting period based on the device specs, rescan the parent
bus to recover the devices.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1749834034-18498-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On 64-bit systems, writing/reading one u64 is faster than two u32s even
when they're are adjacent in a struct. The compilers won't guarantee
they will combine those; I observed both successful and unsuccessful
attempts with both GCC and Clang, and it's not easy to say what it
depends on.
There's a few places in libeth_xdp winning up to several percent from
combined access (both performance and object code size, especially
when unrolling). Add __LIBETH_WORD_ACCESS and use it there on LE.
Drivers are free to optimize HW-specific callbacks under the same
definition.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
XSkFQ refill is pretty generic across the drivers minus FQ descriptor
filling and can easily be unified with one inline callback.
XSk wakeup is usually not, but here, instead of commonly used
"SW interrupts", I picked firing an IPI. In most tests, it showed better
performance; it also provides better control for userspace on which CPU
will handle the xmit, as SW interrupts honor IRQ affinity no matter
which core produces XSk xmit descs (while XDPSQs are associated 1:1
with cores having the same ID).
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add XSk counterparts for preparing XSk &libeth_xdp_buff (adding head and
frags), running the program, and handling the verdict, inc. XDP_PASS.
Shortcuts in comparison with regular Rx: frags and all verdicts except
XDP_REDIRECT are under unlikely() and out of line; no checks for XDP
program presence as it's always true for XSk.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # optimizations
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reuse core sending functions to send XSk xmit frames.
Both metadata and no metadata pools/driver are supported. libeth_xdp
also provides generic XSk metadata ops, currently with the checksum
offload only and for cases when HW doesn't require supplying L3/L4
checksum offsets. Drivers are free to pass their own ops.
&libeth_xdp_tx_bulk is not used here as it would be redundant;
pool->tx_descs are accessed directly.
Fake "libeth_xsktmo" is needed to hide implementation details from the
drivers when they want to use the generic ops: the original struct is
defined in the same file where dev->xsk_tx_metadata_ops gets set to
avoid duplication of slowpath; at the same time; XSk xmit functions
use local "fast" copy to inline XMO callbacks.
Tx descriptor filling loop is unrolled by 8.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # optimizations
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add Xsk counterparts for XDP_TX buffer sending and completion.
The same base structures and functions used from the libeth_xdp core,
with adjustments to that XSk Rx always operates on &xdp_buff_xsk for
both head and frags. And unlike regular Rx, here unlikely() are used
for frags, as the header split gives no benefits for XSk Rx, at
least for now.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
End the XDP section by adding helpers to setup XDP features, flipping
.ndo_xdp_xmit() support at runtime (in case when it's not always on),
and calculating the queue clean/refill threshold.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Defining driver-specific functions to pass to libeth_xdp functions can
induce boilerplates and/or look a bit cryptic with all those layers of
indirection. On the other hand, this indirection is needed to allow
compilers to uninline big functions even when passed to __always_inline
helpers (too much inlining also hurts performance in some cases), plus
to reuse some XDP helpers in XSk code.
Add macros to quickly build them, with the detailed kdoc. They take
names of the actual callbacks for filling a Tx descriptor and other
purely HW-specific things and wrap them appropriately.
LIBETH_XDP_DEFINE_{BEGIN,END}() is needed for GCC 8+ unfortunately to
let the drivers control which functions will be static and which global
without hitting `-Wold-style-declaration`.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Running a prog and handling the verdicts, up to napi_gro_receive()
is also pretty generic code not really differing between vendors
(except for Tx descriptor filling and Rx descriptor parsing).
Define a couple inlines to do that. The inline callbacks a driver
needs to pass is mentioned above: Tx descriptor filling for XDP_TX,
populating skb with the descriptor data for XDP_PASS, finalizing
XDPSQs after the polling loop for XDP_TX (kicking the HW to start
sending).
The populate callback passes only &libeth_xdp_buff assuming buff::desc
pointer is enough, plus you can always get the corresponding Rx queue
structure via container_of(buff::rxq). If not, a driver can extend
the buff with more fields directly on the stack without touching
libeth_xdp definitions.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add convenience helpers to build an &xdp_buff. This means: general
initialization before the NAPI loop, adding head, adding frags etc.
libeth_xdp_process_buff() is the same what everybody have in their
drivers:
dma_sync_for_cpu();
if (!frag) {
add_head();
prefetch();
} else {
add_frag();
}
Note that I don't use net_prefetch(), sticking to the original
prefetch(). In none of my tests prefetching 128 bytes yielded better
perf than 64 bytes. That might differ if the headers are huge enough,
but then additional tunneling etc. overhead takes place, you either
way won't win a lot.
&libeth_xdp_stash is for cases when you exit the polling loop without
finishing building the buff. If that happens, you need to store the
buffer in the queue structure until the next loop and then restore it.
It makes no sense to place a whole full &xdp_buff there. Define a
minimal structure, which would store only the fields essential to
restore it.
I was able to pack it into 16 bytes, which is only 8 bytes bigger
than `struct sk_buff *skb` on x64.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When XDP Tx queues are not interrupt-driven but use lazy cleaning,
i.e. only when there are less than `threshold` free descriptors left,
we also need cleanup timers to avoid &xdp_buff and &xdp_frame stall
for too long, especially with Page Pool (it warns every about inflight
pages every 60 second).
Let's say we sent 256 frames and don't need to send more, but we clean
only when the number of pending items >= 384. In that case, those 256
will stall until 128 more are sent. For this, add simple helpers to
run a timer which will clean the queue regardless, after 1 second of
the last send.
The timer is triggered when finalizing the queue. As long as there is
regular active traffic, the timer doesn't fire.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Unfortunately, it's not always possible to allocate
max(num_rxqs, nr_cpu_ids) even on hi-end NICs.
To mitigate this, add simple locking helpers to libeth_xdp.
As long as XDPSQs are not shared, the whole functionality is gated
behind a static lock. Otherwise, each bulk flush locks the queue for
the time of cleaning and filling the descriptors.
As long as this particular queue is not used by more than 1 CPU,
the impact is minimal (runtime check for boolean twice per 16+
descriptors).
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # static key
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Similarly to libeth_tx_complete(), add libeth_xdp_complete_tx() to
handle XDP_TX and xmit buffers. Both use bulk return under the hood.
Also add out of line libeth_tx_complete_any() which handles both
regular and XDP frames (if libeth_xdp is loaded), for example,
to call on queue destroy, where we don't need inlining but
convenience.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add helpers for implementing .ndo_xdp_xmit().
Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack,
then flush. If DMA mapping is failed for some reason, don't try mapping
further frames, but still flush what was already prepared.
DMA address of a head frame is stored in its headroom, assuming it
has enough of it for an 8 (or 4) byte value.
In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also
needs @finalize to kick the XDPSQ after filling.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Start adding XDP-specific code to libeth, namely handling XDP_TX buffers
(only sending).
The idea is that we accumulate up to 16 buffers on the stack, then,
if either the limit is reached or the polling is finished, flush them
at once with only one XDPSQ cleaning (if needed). The main sending
function will be aware of the sending budget and already have all the
info to send the buffers, so it can't fail.
Drivers need to provide 2 inline callbacks to the main sending function:
for cleaning an XDPSQ and for filling descriptors; the library code
takes care of the rest.
Note that unlike the generic code, multi-buffer support is not wrapped
here with unlikely() to not hurt header split setups.
&libeth_xdp_buff is a simple extension over &xdp_buff which has a direct
pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL
size and 16-byte alignment on x86_64).
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Expand libeth's Page Pool functionality by adding native XDP support.
This means picking the appropriate headroom and DMA direction.
Also, register all the created &page_pools as XDP memory models.
A driver then can call xdp_rxq_info_attach_page_pool() when registering
its RxQ info.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Back when the libeth Rx core was initially written, devmem was a draft
and netmem_ref didn't exist in the mainline. Now that it's here, make
libeth MP-agnostic before introducing any new code or any new library
users.
When it's known that the created PP/FQ is for header buffers, use faster
"unsafe" underscored netmem <--> virt accessors as netmem_is_net_iov()
is always false in that case, but consumes some cycles (bit test +
true branch).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The field is spelled "message_priprity" in the big-endian bit-field
definition. Nothing in-tree currently references the member, so the
typo does not break kernel builds, but it is clearly incorrect.
Signed-off-by: RubenKelevra <rubenkelevra@gmail.com>
Link: https://patch.msgid.link/20250612145012.185321-1-rubenkelevra@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- eir: Fix NULL pointer deference on eir_get_service_data
- eir: Fix possible crashes on eir_create_adv_data
- hci_sync: Fix broadcast/PA when using an existing instance
- ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
- ISO: Fix not using bc_sid as advertisement SID
- MGMT: Fix sparse errors
-----BEGIN PGP SIGNATURE-----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=dulg
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- eir: Fix NULL pointer deference on eir_get_service_data
- eir: Fix possible crashes on eir_create_adv_data
- hci_sync: Fix broadcast/PA when using an existing instance
- ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
- ISO: Fix not using bc_sid as advertisement SID
- MGMT: Fix sparse errors
* tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix sparse errors
Bluetooth: ISO: Fix not using bc_sid as advertisement SID
Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
Bluetooth: eir: Fix possible crashes on eir_create_adv_data
Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance
Bluetooth: Fix NULL pointer deference on eir_get_service_data
====================
Link: https://patch.msgid.link/20250611204944.1559356-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function is no longer used after the four prior fixes.
Given all prior uses were wrong, it seems better to remove it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Offload path is used for GRO with SW IPsec, and not just for HW
offload. So initialize it anyway.
Fixes: 585b64f5a6 ("xfrm: delay initialization of offload path till its actually requested")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Closes: https://lore.kernel.org/all/aEGW_5HfPqU1rFjl@krikkit
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently bc_sid is being ignore when acting as Broadcast Source role,
so this fix it by passing the bc_sid and then use it when programming
the PA:
< HCI Command: LE Set Exte.. (0x08|0x0036) plen 25
Handle: 0x01
Properties: 0x0000
Min advertising interval: 140.000 msec (0x00e0)
Max advertising interval: 140.000 msec (0x00e0)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
TX power: Host has no preference (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 2M (0x02)
SID: 0x01
Scan request notifications: Disabled (0x00)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmhH/swTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnONCCACa16bTW53gBzmiTxdEgUJ/h+gQuR8G
Fj+yOYIWNZY/YOExa40ldApu3iB9UAB0D+FOly4Wv5zYDct6yNBxqtZjbkTFMaoi
3i+SSrRLNtIxgGs1KgJKVPis8mhCqiBL0aGoJDGyRiye6hotECDyQWvlGM3lMGUr
wdMDQW2xyKOWvm++jXijkUMyKThmI7czlSH8al+JU9KcAO9hiUlGzejdI56KUIMW
TRlg2QSK9CfIzgUP4RQughbF59/8Xbq3LOidu50xMad2wiOJj0IUHB0h6LoAshnS
jFy4Ox4Gw5hcmdaEKazjYEtq3nQeZ6wct7jThw02e4D9h0ac2MCVhphk
=Pt9d
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.17-20250610' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-06-10
The first 4 patches are by Vincent Mailhol and prepare the CAN netlink
interface for the introduction of CAN XL configuration.
Geert Uytterhoeven's patch updates the CAN networking documentation.
The last 2 patched are by Davide Caratti and introduce skb drop
reasons in the receive path of several CAN protocols.
* tag 'linux-can-next-for-6.17-20250610' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: add drop reasons in CAN protocols receive path
can: add drop reasons in the receive path of AF_CAN
documentation: networking: can: Document alloc_candev_mqs()
can: netlink: can_changelink(): rename tdc_mask into fd_tdc_flag_provided
can: bittiming: rename can_tdc_is_enabled() into can_fd_tdc_is_enabled()
can: bittiming: rename CAN_CTRLMODE_TDC_MASK into CAN_CTRLMODE_FD_TDC_MASK
can: netlink: replace tabulation by space in assignment
====================
Link: https://patch.msgid.link/20250610094933.1593081-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.
This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.
Ensure the function pointer does not turn NULL after the check.
Fixes: 8934ce2fd0 ("bpf: sockmap redirect ingress support")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new function, netif_subqueue_sent, which is a wrapper for
netdev_tx_sent_queue.
Drivers that use the subqueue variant macros, netif_subqueue_xxx,
identify queue by index and are not required to obtain
struct netdev_queue explicitly.
Such drivers still need to call netdev_tx_sent_queue which is a
counterpart of netif_subqueue_completed_wake. Allowing drivers to use a
subqueue variant for this purpose improves their code consistency by
always referring to queue by its index.
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Link: https://patch.msgid.link/909a5c92db49cad39f0954d6cb86775e6480ef4c.1749038081.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function was introduced in commit 783da70e83 ("net: add
sock_enable_timestamps"), with one caller in rxrpc.
That only caller was removed in commit 7903d4438b ("rxrpc: Don't use
received skbuff timestamps").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250609153254.3504909-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for reporting additional hardware counters for drop and
TC using the ethtool -S interface.
These counters include:
- Aggregate Rx/Tx drop counters
- Per-TC Rx/Tx packet counters
- Per-TC Rx/Tx byte counters
- Per-TC Rx/Tx pause frame counters
The counters are exposed using ethtool_ops->get_ethtool_stats and
ethtool_ops->get_strings. This feature/counters are not available
to all versions of hardware.
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20250609100103.GA7102@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Besides the existing pr_warn_once(), use skb drop reasons in case AF_CAN
layer drops non-conformant CAN{,FD,XL} frames, or conformant frames
received by "wrong" devices, so that it's possible to debug (and count)
such events using existing tracepoints:
| # perf record -e skb:kfree_skb -aR -- ./drv/canfdtest -v -g -l 1 vcan0
| # perf script
| [...]
| canfdtest 1123 [000] 3893.271264: skb:kfree_skb: skbaddr=0xffff975703c9f700 rx_sk=(nil) protocol=12 location=can_rcv+0x4b reason: CAN_RX_INVALID_FRAME
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20250604160605.1005704-2-dcaratti@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
- MGMT: Protect mgmt_pending list with its own lock
- hci_core: fix list_for_each_entry_rcu usage
- btintel_pcie: Increase the tx and rx descriptor count
- btintel_pcie: Reduce driver buffer posting to prevent race condition
- btintel_pcie: Fix driver not posting maximum rx buffers
-----BEGIN PGP SIGNATURE-----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=VZN1
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
- MGMT: Protect mgmt_pending list with its own lock
- hci_core: fix list_for_each_entry_rcu usage
- btintel_pcie: Increase the tx and rx descriptor count
- btintel_pcie: Reduce driver buffer posting to prevent race condition
- btintel_pcie: Fix driver not posting maximum rx buffers
* tag 'for-net-2025-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Protect mgmt_pending list with its own lock
Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
Bluetooth: btintel_pcie: Reduce driver buffer posting to prevent race condition
Bluetooth: btintel_pcie: Increase the tx and rx descriptor count
Bluetooth: btintel_pcie: Fix driver not posting maximum rx buffers
Bluetooth: hci_core: fix list_for_each_entry_rcu usage
====================
Link: https://patch.msgid.link/20250605191136.904411-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN
in all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place,
fix GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth: stmmac: prevent div by 0 when clock rate is misconfigured
- eth: ice: fix Tx scheduler handling of XDP and changing queue count
- eth: b53: fix support for the RGMII interface when delays configured
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sRQt
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place, fix
GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth:
- stmmac: prevent div by 0 when clock rate is misconfigured
- ice: fix Tx scheduler handling of XDP and changing queue count
- eth: fix support for the RGMII interface when delays configured"
* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
calipso: unlock rcu before returning -EAFNOSUPPORT
seg6: Fix validation of nexthop addresses
net: prevent a NULL deref in rtnl_create_link()
net: annotate data-races around cleanup_net_task
selftests: drv-net: tso: make bkg() wait for socat to quit
selftests: drv-net: tso: fix the GRE device name
selftests: drv-net: add configs for the TSO test
wireguard: device: enable threaded NAPI
netlink: specs: rt-link: decode ip6gre
netlink: specs: rt-link: add missing byte-order properties
net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
net: dsa: b53: do not touch DLL_IQQD on bcm53115
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
net: dsa: b53: do not configure bcm63xx's IMP port interface
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: do not enable EEE on bcm63xx
net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
...
During ILA address translations, the L4 checksums can be handled in
different ways. One of them, adj-transport, consist in parsing the
transport layer and updating any found checksum. This logic relies on
inet_proto_csum_replace_by_diff and produces an incorrect skb->csum when
in state CHECKSUM_COMPLETE.
This bug can be reproduced with a simple ILA to SIR mapping, assuming
packets are received with CHECKSUM_COMPLETE:
$ ip a show dev eth0
14: eth0@if15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 62:ae:35:9e:0f:8d brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 3333:0:0:1::c078/64 scope global
valid_lft forever preferred_lft forever
inet6 fd00:10:244:1::c078/128 scope global nodad
valid_lft forever preferred_lft forever
inet6 fe80::60ae:35ff:fe9e:f8d/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
$ ip ila add loc_match fd00:10:244:1 loc 3333:0:0:1 \
csum-mode adj-transport ident-type luid dev eth0
Then I hit [fd00:10:244:1::c078]:8000 with a server listening only on
[3333:0:0:1::c078]:8000. With the bug, the SYN packet is dropped with
SKB_DROP_REASON_TCP_CSUM after inet_proto_csum_replace_by_diff changed
skb->csum. The translation and drop are visible on pwru [1] traces:
IFACE TUPLE FUNC
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ipv6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ip6_rcv_core
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) nf_hook_slow
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) inet_proto_csum_replace_by_diff
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_early_demux
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_route_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input_finish
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_protocol_deliver_rcu
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) raw6_local_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ipv6_raw_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) __skb_checksum_complete
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skb_reason(SKB_DROP_REASON_TCP_CSUM)
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_head_state
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_data
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_free_head
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skbmem
This is happening because inet_proto_csum_replace_by_diff is updating
skb->csum when it shouldn't. The L4 checksum is updated such that it
"cancels" the IPv6 address change in terms of checksum computation, so
the impact on skb->csum is null.
Note this would be different for an IPv4 packet since three fields
would be updated: the IPv4 address, the IP checksum, and the L4
checksum. Two would cancel each other and skb->csum would still need
to be updated to take the L4 checksum change into account.
This patch fixes it by passing an ipv6 flag to
inet_proto_csum_replace_by_diff, to skip the skb->csum update if we're
in the IPv6 case. Note the behavior of the only other user of
inet_proto_csum_replace_by_diff, the BPF subsystem, is left as is in
this patch and fixed in the subsequent patch.
With the fix, using the reproduction from above, I can confirm
skb->csum is not touched by inet_proto_csum_replace_by_diff and the TCP
SYN proceeds to the application after the ILA translation.
Link: https://github.com/cilium/pwru [1]
Fixes: 65d7ab8de5 ("net: Identifier Locator Addressing module")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/b5539869e3550d46068504feb02d37653d939c0b.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Usual collection of driver fixes:
- Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw
- Further ODP functionality in rxe
- Remote access MRs in mana, along with more page sizes
- Improve CM scalability with a rwlock around the agent
- More trace points for hns
- ODP hmm conversion to the new two step dma API
- Support the ethernet HW device in mana as well as the RNIC
- Cleanups:
* Use secs_to_jiffies() when appropriate
* Use ERR_CAST() instead of naked casts
* Don't use %pK in printk
* Unusued functions removed
* Allocation type matching
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaDm95gAKCRCFwuHvBreF
YXJxAQCZ+p+mxt0rTeVI2j6YQ26thuvb/tH0Upu8epgdQ3T/ZgD/YOHBC6OrXWJa
Uz6BTiyz/xiyMtJLTD4kEiG2o74J1gE=
=DNQC
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of driver fixes:
- Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw
- Further ODP functionality in rxe
- Remote access MRs in mana, along with more page sizes
- Improve CM scalability with a rwlock around the agent
- More trace points for hns
- ODP hmm conversion to the new two step dma API
- Support the ethernet HW device in mana as well as the RNIC
- Cleanups:
- Use secs_to_jiffies() when appropriate
- Use ERR_CAST() instead of naked casts
- Don't use %pK in printk
- Unusued functions removed
- Allocation type matching"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (57 commits)
RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work
RDMA/bnxt_re: Support extended stats for Thor2 VF
RDMA/hns: Fix endian issue in trace events
RDMA/mlx5: Avoid flexible array warning
IB/cm: Remove dead code and adjust naming
RDMA/core: Avoid hmm_dma_map_alloc() for virtual DMA devices
RDMA/rxe: Break endless pagefault loop for RO pages
RDMA/bnxt_re: Fix return code of bnxt_re_configure_cc
RDMA/bnxt_re: Fix missing error handling for tx_queue
RDMA/bnxt_re: Fix incorrect display of inactivity_cp in debugfs output
RDMA/mlx5: Add support for 200Gbps per lane speeds
RDMA/mlx5: Remove the redundant MLX5_IB_STAGE_UAR stage
RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction
net: mana: Add support for auxiliary device servicing events
RDMA/mana_ib: unify mana_ib functions to support any gdma device
RDMA/mana_ib: Add support of mana_ib for RNIC and ETH nic
net: mana: Probe rdma device in mana driver
RDMA/siw: replace redundant ternary operator with just rv
RDMA/umem: Separate implicit ODP initialization from explicit ODP
RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage
...
To support Multi Vports on Bare metal, increase the device config response
version. And, skip the register HW vport, and register filter steps, when
the Bare metal hostmode is set.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1747671636-5810-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sctp_do_peeloff is only used inside of net/sctp/socket.c,
so mark it static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250526054745.2329201-1-hch@lst.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lingering should be transport-independent in the long run. In preparation
for supporting other transports, as well as the linger on shutdown(), move
code to core.
Generalize by querying vsock_transport::unsent_bytes(), guard against the
callback being unimplemented. Do not pass sk_lingertime explicitly. Pull
SOCK_LINGER check into vsock_linger().
Flatten the function. Remove the nested block by inverting the condition:
return early on !timeout.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-2-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgzoyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0cEIAJrO2lKaFN4fbv6G
FQTHQF1soicGpak3yY9u1o5LCqEIzjW2ScxcKG+dl7FcXsaZYcyg4HNzxbV9l/rr
Ck2qZh3CCkVem0/nEsOJwYbNYKnq+pM5h1jIwn/LUkRuV55s5K5oRHzRj673BEj5
BLaRFivZ1t4eM64EqbU1ut11/VEAkr2GcB01forHDeuWwoa3p6DfmALo7X/U43Vg
FN2hp/3PPfiU6PwoCxQlmMpHNFkoZOHpi8P8Qm+mu0MQI12QrUC1Riib4EkrwEEv
a28F4Au+TIjLceRdi6Ss/rhTC71usQIQ2OnnmHBUeYgdwHRXHgfewhtQDUKTU0MR
OwKECbY=
=skuS
-----END PGP SIGNATURE-----
Merge tag 'v6.15' into rdma.git for-next
Following patches need the RDMA rc branch since we are past the RC cycle
now.
Merge conflicts resolved based on Linux-next:
- For RXE odp changes keep for-next version and fixup new places that
need to call is_odp_mr()
https://lore.kernel.org/r/20250422143019.500201bd@canb.auug.org.auhttps://lore.kernel.org/r/20250514122455.3593b083@canb.auug.org.au
- irdma is keeping the while/kfree bugfix from -rc and the pf/cdev_info
change from for-next
https://lore.kernel.org/r/20250513130630.280ee6c5@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----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=fBhd
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next,
specifically 26 patches: 5 patches adding/updating selftests,
4 fixes, 3 PREEMPT_RT fixes, and 14 patches to enhance nf_tables):
1) Improve selftest coverage for pipapo 4 bit group format, from
Florian Westphal.
2) Fix incorrect dependencies when compiling a kernel without
legacy ip{6}tables support, also from Florian.
3) Two patches to fix nft_fib vrf issues, including selftest updates
to improve coverage, also from Florian Westphal.
4) Fix incorrect nesting in nft_tunnel's GENEVE support, from
Fernando F. Mancera.
5) Three patches to fix PREEMPT_RT issues with nf_dup infrastructure
and nft_inner to match in inner headers, from Sebastian Andrzej Siewior.
6) Integrate conntrack information into nft trace infrastructure,
from Florian Westphal.
7) A series of 13 patches to allow to specify wildcard netdevice in
netdev basechain and flowtables, eg.
table netdev filter {
chain ingress {
type filter hook ingress devices = { eth0, eth1, vlan* } priority 0; policy accept;
}
}
This also allows for runtime hook registration on NETDEV_{UN}REGISTER
event, from Phil Sutter.
netfilter pull request 25-05-23
* tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: (26 commits)
selftests: netfilter: Torture nftables netdev hooks
netfilter: nf_tables: Add notifications for hook changes
netfilter: nf_tables: Support wildcard netdev hook specs
netfilter: nf_tables: Sort labels in nft_netdev_hook_alloc()
netfilter: nf_tables: Handle NETDEV_CHANGENAME events
netfilter: nf_tables: Wrap netdev notifiers
netfilter: nf_tables: Respect NETDEV_REGISTER events
netfilter: nf_tables: Prepare for handling NETDEV_REGISTER events
netfilter: nf_tables: Have a list of nf_hook_ops in nft_hook
netfilter: nf_tables: Pass nf_hook_ops to nft_unregister_flowtable_hook()
netfilter: nf_tables: Introduce nft_register_flowtable_ops()
netfilter: nf_tables: Introduce nft_hook_find_ops{,_rcu}()
netfilter: nf_tables: Introduce functions freeing nft_hook objects
netfilter: nf_tables: add packets conntrack state to debug trace info
netfilter: conntrack: make nf_conntrack_id callable without a module dependency
netfilter: nf_dup_netdev: Move the recursion counter struct netdev_xmit
netfilter: nft_inner: Use nested-BH locking for nft_pcpu_tun_ctx
netfilter: nf_dup{4, 6}: Move duplication check to task_struct
netfilter: nft_tunnel: fix geneve_opt dump
selftests: netfilter: nft_fib.sh: add type and oif tests with and without VRFs
...
====================
Link: https://patch.msgid.link/20250523132712.458507-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GRVJ
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
1) Remove some unnecessary strscpy_pad() size arguments.
From Thorsten Blum.
2) Correct use of xso.real_dev on bonding offloads.
Patchset from Cosmin Ratiu.
3) Add hardware offload configuration to XFRM_MSG_MIGRATE.
From Chiachang Wang.
4) Refactor migration setup during cloning. This was
done after the clone was created. Now it is done
in the cloning function itself.
From Chiachang Wang.
5) Validate assignment of maximal possible SEQ number.
Prevent from setting to the maximum sequrnce number
as this would cause for traffic drop.
From Leon Romanovsky.
6) Prevent configuration of interface index when offload
is used. Hardware can't handle this case.i
From Leon Romanovsky.
7) Always use kfree_sensitive() for SA secret zeroization.
From Zilin Guan.
ipsec-next-2025-05-23
* tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: use kfree_sensitive() for SA secret zeroization
xfrm: prevent configuration of interface index when offload is used
xfrm: validate assignment of maximal possible SEQ number
xfrm: Refactor migration setup during the cloning process
xfrm: Migrate offload configuration
bonding: Fix multiple long standing offload races
bonding: Mark active offloaded xfrm_states
xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free}
xfrm: Remove unneeded device check from validate_xmit_xfrm
xfrm: Use xdo.dev instead of xdo.real_dev
net/mlx5: Avoid using xso.real_dev unnecessarily
xfrm: Remove unnecessary strscpy_pad() size arguments
====================
Link: https://patch.msgid.link/20250523075611.3723340-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace kfree_skb() used in neigh_resolve_output() and
neigh_connected_output() with kfree_skb_reason().
Following new skb drop reason is added:
/* failed to fill the device hard header */
SKB_DROP_REASON_NEIGH_HH_FILLFAIL
Signed-off-by: Qiu Yutan <qiu.yutan@zte.com.cn>
Signed-off-by: Jiang Kun <jiang.kun2@zte.com.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Xu Xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Notify user space if netdev hooks are updated due to netdev add/remove
events. Send minimal notification messages by introducing
NFT_MSG_NEWDEV/DELDEV message types describing a single device only.
Upon NETDEV_CHANGENAME, the callback has no information about the
interface's old name. To provide a clear message to user space, include
the hook's stored interface name in the notification.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Supporting a 1:n relationship between nft_hook and nf_hook_ops is
convenient since a chain's or flowtable's nft_hooks may remain in place
despite matching interfaces disappearing. This stabilizes ruleset dumps
in that regard and opens the possibility to claim newly added interfaces
which match the spec. Also it prepares for wildcard interface specs
since these will potentially match multiple interfaces.
All spots dealing with hook registration are updated to handle a list of
multiple nf_hook_ops, but nft_netdev_hook_alloc() only adds a single
item for now to retain the old behaviour. The only expected functional
change here is how vanishing interfaces are handled: Instead of dropping
the respective nft_hook, only the matching nf_hook_ops are dropped.
To safely remove individual ops from the list in netdev handlers, an
rcu_head is added to struct nf_hook_ops so kfree_rcu() may be used.
There is at least nft_flowtable_find_dev() which may be iterating
through the list at the same time.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Also a pretty dull wrapper around the hook->ops.dev comparison for now.
Will search the embedded nf_hook_ops list in future. The ugly cast to
eliminate the const qualifier will vanish then, too.
Since this future list will be RCU-protected, also introduce an _rcu()
variant here.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
fib has two modes:
1. Obtain output device according to source or destination address
2. Obtain the type of the address, e.g. local, unicast, multicast.
'fib daddr type' should return 'local' if the address is configured
in this netns or unicast otherwise.
'fib daddr . iif type' should return 'local' if the address is configured
on the input interface or unicast otherwise, i.e. more restrictive.
However, if the interface is part of a VRF, then 'fib daddr type'
returns unicast even if the address is configured on the incoming
interface.
This is broken for both ipv4 and ipv6.
In the ipv4 case, inet_dev_addr_type must only be used if the
'iif' or 'oif' (strict mode) was requested.
Else inet_addr_type_dev_table() needs to be used and the correct
dev argument must be passed as well so the correct fib (vrf) table
is used.
In the ipv6 case, the bug is similar, without strict mode, dev is NULL
so .flowi6_l3mdev will be set to 0.
Add a new 'nft_fib_l3mdev_master_ifindex_rcu()' helper and use that
to init the .l3mdev structure member.
For ipv6, use it from nft_fib6_flowi_init() which gets called from
both the 'type' and the 'route' mode eval functions.
This provides consistent behaviour for all modes for both ipv4 and ipv6:
If strict matching is requested, the input respectively output device
of the netfilter hooks is used.
Otherwise, use skb->dev to obtain the l3mdev ifindex.
Without this, most type checks in updated nft_fib.sh selftest fail:
FAIL: did not find veth0 . 10.9.9.1 . local in fibtype4
FAIL: did not find veth0 . dead:1::1 . local in fibtype6
FAIL: did not find veth0 . dead:9::1 . local in fibtype6
FAIL: did not find tvrf . 10.0.1.1 . local in fibtype4
FAIL: did not find tvrf . 10.9.9.1 . local in fibtype4
FAIL: did not find tvrf . dead:1::1 . local in fibtype6
FAIL: did not find tvrf . dead:9::1 . local in fibtype6
FAIL: fib expression address types match (iif in vrf)
(fib errounously returns 'unicast' for all of them, even
though all of these addresses are local to the vrf).
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As long as recvmsg() or recvmmsg() is used with cmsg, it is not
possible to avoid receiving file descriptors via SCM_RIGHTS.
This behaviour has occasionally been flagged as problematic, as
it can be (ab)used to trigger DoS during close(), for example, by
passing a FUSE-controlled fd or a hung NFS fd.
For instance, as noted on the uAPI Group page [0], an untrusted peer
could send a file descriptor pointing to a hung NFS mount and then
close it. Once the receiver calls recvmsg() with msg_control, the
descriptor is automatically installed, and then the responsibility
for the final close() now falls on the receiver, which may result
in blocking the process for a long time.
Regarding this, systemd calls cmsg_close_all() [1] after each
recvmsg() to close() unwanted file descriptors sent via SCM_RIGHTS.
However, this cannot work around the issue at all, because the final
fput() may still occur on the receiver's side once sendmsg() with
SCM_RIGHTS succeeds. Also, even filtering by LSM at recvmsg() does
not work for the same reason.
Thus, we need a better way to refuse SCM_RIGHTS at sendmsg().
Let's introduce SO_PASSRIGHTS to disable SCM_RIGHTS.
Note that this option is enabled by default for backward
compatibility.
Link: https://uapi-group.org/kernel-features/#disabling-reception-of-scm_rights-for-af_unix-sockets #[0]
Link: https://github.com/systemd/systemd/blob/v257.5/src/basic/fd-util.c#L612-L628 #[1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As explained in the next patch, SO_PASSRIGHTS would have a problem
if we assigned a corresponding bit to socket->flags, so it must be
managed in struct sock.
Mixing socket->flags and sk->sk_flags for similar options will look
confusing, and sk->sk_flags does not have enough space on 32bit system.
Also, as mentioned in commit 16e5726269 ("af_unix: dont send
SCM_CREDENTIALS by default"), SOCK_PASSCRED and SOCK_PASSPID handling
is known to be slow, and managing the flags in struct socket cannot
avoid that for embryo sockets.
Let's move SOCK_PASS{CRED,PIDFD,SEC} to struct sock.
While at it, other SOCK_XXX flags in net.h are grouped as enum.
Note that assign_bit() was atomic, so the writer side is moved down
after lock_sock() in setsockopt(), but the bit is only read once
in sendmsg() and recvmsg(), so lock_sock() is not needed there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SCM_CREDENTIALS and SCM_SECURITY can be recv()ed by calling
scm_recv() or scm_recv_unix(), and SCM_PIDFD is only used by
scm_recv_unix().
scm_recv() is called from AF_NETLINK and AF_BLUETOOTH.
scm_recv_unix() is literally called from AF_UNIX.
Let's restrict SO_PASSCRED and SO_PASSSEC to such sockets and
SO_PASSPIDFD to AF_UNIX only.
Later, SOCK_PASS{CRED,PIDFD,SEC} will be moved to struct sock
and united with another field.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
scm_recv() has been placed in scm.h since the pre-git era for no
particular reason (I think), which makes the file really fragile.
For example, when you move SOCK_PASSCRED from include/linux/net.h to
enum sock_flags in include/net/sock.h, you will see weird build failure
due to terrible dependency.
To avoid the build failure in the future, let's move scm_recv(_unix())?
and its callees to scm.c.
Note that only scm_recv() needs to be exported for Bluetooth.
scm_send() should be moved to scm.c too, but I'll revisit later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2 ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a2 ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bgyq
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2025-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-05-21
1) Fix some missing kfree_skb in the error paths of espintcp.
From Sabrina Dubroca.
2) Fix a reference leak in espintcp.
From Sabrina Dubroca.
3) Fix UDP GRO handling for ESPINUDP.
From Tobias Brunner.
4) Fix ipcomp truesize computation on the receive path.
From Sabrina Dubroca.
5) Sanitize marks before policy/state insertation.
From Paul Chaignon.
* tag 'ipsec-2025-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Sanitize marks before insert
xfrm: ipcomp: fix truesize computation on receive
xfrm: Fix UDP GRO handling for some corner cases
espintcp: remove encap socket caching to avoid reference leak
espintcp: fix skb leaks
====================
Link: https://patch.msgid.link/20250521054348.4057269-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that the only remaining caller of __skb_checksum() is
skb_checksum(), fold __skb_checksum() into skb_checksum(). This makes
struct skb_checksum_ops unnecessary, so remove that too and simply do
the "regular" net checksum. It also makes the wrapper functions
csum_partial_ext() and csum_block_add_ext() unnecessary, so remove those
too and just use the underlying functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-7-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sctp_compute_cksum() just use the new function skb_crc32c(),
instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C. This is faster and simpler.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-6-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use separate link type id for unicast and broadcast ISO connections.
These connection types are handled with separate HCI commands, socket
API is different, and hci_conn has union fields that are different in
the two cases, so they shall not be mixed up.
Currently in most places it is attempted to distinguish ucast by
bacmp(&c->dst, BDADDR_ANY) but it is wrong as dst is set for bcast sink
hci_conn in iso_conn_ready(). Additionally checking sync_handle might be
OK, but depends on details of bcast conn configuration flow.
To avoid complicating it, use separate link types.
Fixes: f764a6c2c1 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth needs some way for user to get supported so_timestamping flags
for the different socket types.
Use SIOCETHTOOL API for this purpose. As hci_dev is not associated with
struct net_device, the existing implementation can't be reused, so we
add a small one here.
Add support (only) for ETHTOOL_GET_TS_INFO command. The API differs
slightly from netdev in that the result depends also on socket type.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Although commit 75ddcd5ad4 ("Bluetooth: btusb: Configure altsetting
for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out
SCO data through USB Bluetooth chips, it's observed that with the patch
HFP is flaky on most of the existing USB Bluetooth controllers: Intel
chips sometimes send out no packet for Transparent codec; MTK chips may
generate SCO data with a wrong handle for CVSD codec; RTK could split
the data with a wrong packet size for Transparent codec; ... etc.
To address the issue above one needs to reset the altsetting back to
zero when there is no active SCO connection, which is the same as the
BlueZ behavior, and another benefit is the bus doesn't need to reserve
bandwidth when no SCO connection.
This patch adds the infrastructure that allow the user space program to
talk to Bluetooth drivers directly:
- Define the new packet type HCI_DRV_PKT which is specifically used for
communication between the user space program and the Bluetooth drviers
- hci_send_frame intercepts the packets and invokes drivers' HCI Drv
callbacks (so far only defined for btusb)
- 2 kinds of events to user space: Command Status and Command Complete,
the former simply returns the status while the later may contain
additional response data.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Fixes: b16b327edb ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Checking the SOCK_WIFI_STATUS flag bit in sk_flags may give wrong results
since sk_flags are part of a union and the union is used otherwise. Add
sk_requests_wifi_status() which checks if sk is non-NULL, sk is a full
socket (so flags are valid) and checks the flag bit.
Fixes: 76a853f86c ("wifi: free SKBTX_WIFI_STATUS skb tx_flags flag")
Suggested-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250520223430.6875-1-spasswolf@web.de
[edit commit message, fix indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit f130a0cc1b ("inet: fix lwtunnel_valid_encap_type() lock
imbalance") added the rtnl_is_held argument as a temporary fix while
I'm converting nexthop and IPv6 routing table to per-netns RTNL or RCU.
Now all callers of lwtunnel_valid_encap_type() do not hold RTNL.
Let's remove the argument.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_lock is already held when calling bnxt_ulp_irq_stop() and
bnxt_ulp_irq_restart(). When converting rtnl_lock to netdev_lock,
the original code was rtnl_dereference() to indicate that rtnl_lock
was already held. rcu_dereference_protected() is the correct
conversion after replacing rtnl_lock with netdev_lock.
Add a new helper netdev_lock_dereference() similar to
rtnl_dereference().
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250519204130.3097027-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AFAIU always returning -1 from lockdep's compare function
basically disables checking of dependencies between given
locks. Try to be a little more precise about what guarantees
that instance locks won't deadlock.
Right now we only nest them under protection of rtnl_lock.
Mostly in unregister_netdevice_many() and dev_close_many().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250517200810.466531-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename local variable in macros from txq to _txq.
When macro parameter get_desc is expended it is likely to have a txq
token that refers to a different txq variable at the caller's site.
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/95b60d218f004308486d92ed17c8cc6f28bac09d.1747559621.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFS can exhibit lower performance for workloads using short-lived
flows and a small set of 4-tuple.
This is often the case for load-testers, using a pair of hosts,
if the server has a single listener port.
Typical use case :
Server : tcp_crr -T128 -F1000 -6 -U -l30 -R 14250
Client : tcp_crr -T128 -F1000 -6 -U -l30 -c -H server | grep local_throughput
This is because RFS global hash table contains stale information,
when the same RSS key is recycled for another socket and another cpu.
Make sure to undo the changes and go back to initial state when
a flow is disconnected.
Performance of the above test is increased by 22 %,
going from 372604 transactions per second to 457773.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Octavian Purdila <tavip@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250515100354.3339920-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers need to make sure not to pass netmem dma-addrs to the
dma-mapping API in order to support netmem TX.
Add helpers and netmem_dma_*() helpers that enables special handling of
netmem dma-addrs that drivers can use.
Document in netmem.rst what drivers need to do to support netmem TX.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-7-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Augment dmabuf binding to be able to handle TX. Additional to all the RX
binding, we also create tx_vec needed for the TX path.
Provide API for sendmsg to be able to send dmabufs bound to this device:
- Provide a new dmabuf_tx_cmsg which includes the dmabuf to send from.
- MSG_ZEROCOPY with SCM_DEVMEM_DMABUF cmsg indicates send from dma-buf.
Devmem is uncopyable, so piggyback off the existing MSG_ZEROCOPY
implementation, while disabling instances where MSG_ZEROCOPY falls back
to copying.
We additionally pipe the binding down to the new
zerocopy_fill_skb_from_devmem which fills a TX skb with net_iov netmems
instead of the traditional page netmems.
We also special case skb_frag_dma_map to return the dma-address of these
dmabuf net_iovs instead of attempting to map pages.
The TX path may release the dmabuf in a context where we cannot wait.
This happens when the user unbinds a TX dmabuf while there are still
references to its netmems in the TX path. In that case, the netmems will
be put_netmem'd from a context where we can't unmap the dmabuf, Resolve
this by making __net_devmem_dmabuf_binding_free schedule_work'd.
Based on work by Stanislav Fomichev <sdf@fomichev.me>. A lot of the meat
of the implementation came from devmem TCP RFC v1[1], which included the
TX path, but Stan did all the rebasing on top of netmem/net_iov.
Cc: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-5-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently net_iovs support only pp ref counts, and do not support a
page ref equivalent.
This is fine for the RX path as net_iovs are used exclusively with the
pp and only pp refcounting is needed there. The TX path however does not
use pp ref counts, thus, support for get_page/put_page equivalent is
needed for netmem.
Support get_netmem/put_netmem. Check the type of the netmem before
passing it to page or net_iov specific code to obtain a page ref
equivalent.
For dmabuf net_iovs, we obtain a ref on the underlying binding. This
ensures the entire binding doesn't disappear until all the net_iovs have
been put_netmem'ed. We do not need to track the refcount of individual
dmabuf net_iovs as we don't allocate/free them from a pool similar to
what the buddy allocator does for pages.
This code is written to be extensible by other net_iov implementers.
get_netmem/put_netmem will check the type of the netmem and route it to
the correct helper:
pages -> [get|put]_page()
dmabuf net_iovs -> net_devmem_[get|put]_net_iov()
new net_iovs -> new helpers
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-3-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Later patches in the series adds TX net_iovs where there is no pp
associated, so we can't rely on niov->pp->mp_ops to tell what is the
type of the net_iov.
Add a type enum to the net_iov which tells us the net_iov type.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508004830.4100853-2-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Handle soc servicing events which require the rdma auxiliary device resources to
be cleaned up during a suspend, and re-initialized during a resume.
Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1746633545-17653-5-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Initialize gdma device for rdma inside mana module.
For each gdma device, initialize an auxiliary ib device.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1746633545-17653-2-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
New timestamping API was introduced in commit 66f7223039 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert DSA to the new API, so that the ndo_eth_ioctl() path can
be removed completely.
Move the ds->ops->port_hwtstamp_get() and ds->ops->port_hwtstamp_set()
calls from dsa_user_ioctl() to dsa_user_hwtstamp_get() and
dsa_user_hwtstamp_set().
Due to the fact that the underlying ifreq type changes to
kernel_hwtstamp_config, the drivers and the Ocelot switchdev front-end,
all hooked up directly or indirectly, must also be converted all at once.
The conversion also updates the comment from dsa_port_supports_hwtstamp(),
which is no longer true because kernel_hwtstamp_config is kernel memory
and does not need copy_to_user(). I've deliberated whether it is
necessary to also update "err != -EOPNOTSUPP" to a more general "!err",
but all drivers now either return 0 or -EOPNOTSUPP.
The existing logic from the ocelot_ioctl() function, to avoid
configuring timestamping if the PHY supports the operation, is obsoleted
by more advanced core logic in dev_set_hwtstamp_phylib().
This is only a partial preparation for proper PHY timestamping support.
None of these switch driver currently sets up PTP traps for PHY
timestamping, so setting dev->see_all_hwtstamp_requests is not yet
necessary and the conversion is relatively trivial.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # felix, sja1105, mv88e6xxx
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508095236.887789-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, when reducing a qdisc's limit via the ->change() operation, only
the main skb queue was trimmed, potentially leaving packets in the gso_skb
list. This could result in NULL pointer dereference when we only check
sch->limit against sch->q.qlen.
This patch introduces a new helper, qdisc_dequeue_internal(), which ensures
both the gso_skb list and the main queue are properly flushed when trimming
excess packets. All relevant qdiscs (codel, fq, fq_codel, fq_pie, hhf, pie)
are updated to use this helper in their ->change() routines.
Fixes: 76e3cc126b ("codel: Controlled Delay AQM")
Fixes: 4b549a2ef4 ("fq_codel: Fair Queue Codel AQM")
Fixes: afe4fd0624 ("pkt_sched: fq: Fair Queue packet scheduler")
Fixes: ec97ecf1eb ("net: sched: add Flow Queue PIE packet scheduler")
Fixes: 10239edf86 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Fixes: d4b36210c2 ("net: pkt_sched: PIE AQM scheme")
Reported-by: Will <willsroot@protonmail.com>
Reported-by: Savy <savy@syst3mfailure.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags
- hci_event: Fix not using key encryption size when its known
-----BEGIN PGP SIGNATURE-----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=uyVh
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags
- hci_event: Fix not using key encryption size when its known
* tag 'for-net-2025-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Fix not using key encryption size when its known
Bluetooth: MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags
====================
Link: https://patch.msgid.link/20250508150927.385675-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element
contains MCS15 Disable subfield as the sixth bit, which is set when
MCS15 support is not enabled.
Get MCS15 support from EHT operation params and add it in link_conf
so that driver can use this value to know if EHT-MCS 15 reception
is enabled.
Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com>
Link: https://patch.msgid.link/20250505152836.3266829-1-quic_mkumarg@quicinc.com
[remove pointless !! for bool assignment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This fixes the regression introduced by 50c1241e6a8a ("Bluetooth: l2cap:
Check encryption key size on incoming connection") introduced a check for
l2cap_check_enc_key_size which checks for hcon->enc_key_size which may
not be initialized if HCI_OP_READ_ENC_KEY_SIZE is still pending.
If the key encryption size is known, due previously reading it using
HCI_OP_READ_ENC_KEY_SIZE, then store it as part of link_key/smp_ltk
structures so the next time the encryption is changed their values are
used as conn->enc_key_size thus avoiding the racing against
HCI_OP_READ_ENC_KEY_SIZE.
Now that the enc_size is stored as part of key the information the code
then attempts to check that there is no downgrade of security if
HCI_OP_READ_ENC_KEY_SIZE returns a value smaller than what has been
previously stored.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220061
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220063
Fixes: 522e9ed157 ("Bluetooth: l2cap: Check encryption key size on incoming connection")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Older drivers and drivers with lower queue counts often have a static
array of queues, rather than allocating structs for each queue on demand.
Add a helper for adding up qstats from a queue range. Expectation is
that driver will pass a queue range [netdev->real_num_*x_queues, MAX).
It was tempting to always use num_*x_queues as the end, but virtio
seems to clamp its queue count after allocating the netdev. And this
way we can trivaly reuse the helper for [0, real_..).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250507003221.823267-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
-----BEGIN PGP SIGNATURE-----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=s9mS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless features, notably
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
* tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (177 commits)
Revert "wifi: iwlwifi: clean up config macro"
wifi: iwlwifi: move phy_filters to fw_runtime
wifi: iwlwifi: pcie: make sure to lock rxq->read
wifi: iwlwifi: add definitions for iwl_mac_power_cmd version 2
wifi: iwlwifi: clean up config macro
wifi: iwlwifi: mld: simplify iwl_mld_rx_fill_status()
wifi: iwlwifi: mld: rx: simplify channel handling
wifi: iwlwifi: clean up band in RX metadata
wifi: iwlwifi: mld: skip unknown FW channel load values
wifi: iwlwifi: define API for external FSEQ images
wifi: iwlwifi: mld: allow EMLSR on separated 5 GHz subbands
wifi: iwlwifi: mld: use cfg80211_chandef_get_width()
wifi: iwlwifi: mld: fix iwl_mld_emlsr_disallowed_with_link() return
wifi: iwlwifi: mld: clarify variable type
wifi: iwlwifi: pcie: add support for the reset handshake in MSI
wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled
wifi: mac80211: restructure tx profile retrieval for MLO MBSSID
wifi: nl80211: add link id of transmitted profile for MLO MBSSID
wifi: ieee80211: Add helpers to fetch EMLSR delay and timeout values
wifi: mac80211: update ML STA with EML capabilities
...
====================
Link: https://patch.msgid.link/20250506174656.119970-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Assign DEVLINK_PARAM_TYPE_* enum values to DEVLINK_VAR_ATTR_TYPE_* to
ensure the same values are used internally and in UAPI. Benefit from
that by removing the value translations.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250505114513.53370-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_assoc_del_peer() last use was removed in 2015 by
commit 73e6742027 ("sctp: Do not try to search for the transport twice")
which now uses rm_peer instead of del_peer.
sctp_chunk_iif() last use was removed in 2016 by
commit 1f45f78f8e ("sctp: allow GSO frags to access the chunk too")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250501233815.99832-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last use of __strp_unpause() was removed in 2022 by
commit 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250501002402.308843-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Load balance new TCP connections across nexthops also when they
connect to the same service at a single remote address and port.
This affects only port-based multipath hashing:
fib_multipath_hash_policy 1 or 3.
Local connections must choose both a source address and port when
connecting to a remote service, in ip_route_connect. This
"chicken-and-egg problem" (commit 2d7192d6cb ("ipv4: Sanitize and
simplify ip_route_{connect,newports}()")) is resolved by first
selecting a source address, by looking up a route using the zero
wildcard source port and address.
As a result multiple connections to the same destination address and
port have no entropy in fib_multipath_hash.
This is not a problem when forwarding, as skb-based hashing has a
4-tuple. Nor when establishing UDP connections, as autobind there
selects a port before reaching ip_route_connect.
Load balance also TCP, by using a random port in fib_multipath_hash.
Port assignment in inet_hash_connect is not atomic with
ip_route_connect. Thus ports are unpredictable, effectively random.
Implementation details:
Do not actually pass a random fl4_sport, as that affects not only
hashing, but routing more broadly, and can match a source port based
policy route, which existing wildcard port 0 will not. Instead,
define a new wildcard flowi flag that is used only for hashing.
Selecting a random source is equivalent to just selecting a random
hash entirely. But for code clarity, follow the normal 4-tuple hash
process and only update this field.
fib_multipath_hash can be reached with zero sport from other code
paths, so explicitly pass this flowi flag, rather than trying to infer
this case in the function itself.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424143549.669426-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With multipath routes, try to ensure that packets leave on the device
that is associated with the source address.
Avoid the following tcpdump example:
veth0 Out IP 10.1.0.2.38640 > 10.2.0.3.8000: Flags [S]
veth1 Out IP 10.1.0.2.38648 > 10.2.0.3.8000: Flags [S]
Which can happen easily with the most straightforward setup:
ip addr add 10.0.0.1/24 dev veth0
ip addr add 10.1.0.1/24 dev veth1
ip route add 10.2.0.3 nexthop via 10.0.0.2 dev veth0 \
nexthop via 10.1.0.2 dev veth1
This is apparently considered WAI, based on the comment in
ip_route_output_key_hash_rcu:
* 2. Moreover, we are allowed to send packets with saddr
* of another iface. --ANK
It may be ok for some uses of multipath, but not all. For instance,
when using two ISPs, a router may drop packets with unknown source.
The behavior occurs because tcp_v4_connect makes three route
lookups when establishing a connection:
1. ip_route_connect calls to select a source address, with saddr zero.
2. ip_route_connect calls again now that saddr and daddr are known.
3. ip_route_newports calls again after a source port is also chosen.
With a route with multiple nexthops, each lookup may make a different
choice depending on available entropy to fib_select_multipath. So it
is possible for 1 to select the saddr from the first entry, but 3 to
select the second entry. Leading to the above situation.
Address this by preferring a match that matches the flowi4 saddr. This
will make 2 and 3 make the same choice as 1. Continue to update the
backup choice until a choice that matches saddr is found.
Do this in fib_select_multipath itself, rather than passing an fl4_oif
constraint, to avoid changing non-multipath route selection. Commit
e6b45241c5 ("ipv4: reset flowi parameters on route connect") shows
how that may cause regressions.
Also read ipv4.sysctl_fib_multipath_use_neigh only once. No need to
refresh in the loop.
This does not happen in IPv6, which performs only one lookup.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424143549.669426-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The "noqueue" qdisc can either be directly attached, or get default
attached if net_device priv_flags has IFF_NO_QUEUE. In both cases, the
allocated Qdisc structure gets it's enqueue function pointer reset to
NULL by noqueue_init() via noqueue_qdisc_ops.
This is a common case for software virtual net_devices. For these devices
with no-queue, the transmission path in __dev_queue_xmit() will bypass
the qdisc layer. Directly invoking device drivers ndo_start_xmit (via
dev_hard_start_xmit). In this mode the device driver is not allowed to
ask for packets to be queued (either via returning NETDEV_TX_BUSY or
stopping the TXQ).
The simplest and most reliable way to identify this no-queue case is by
checking if enqueue == NULL.
The vrf driver currently open-codes this check (!qdisc->enqueue). While
functionally correct, this low-level detail is better encapsulated in a
dedicated helper for clarity and long-term maintainability.
To make this behavior more explicit and reusable, this patch introduce a
new helper: qdisc_txq_has_no_queue(). Helper will also be used by the
veth driver in the next patch, which introduces optional qdisc-based
backpressure.
This is a non-functional change.
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/174559293172.827981.7583862632045264175.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BIG Create Sync requires the command to just generates a status so this
makes use of __hci_cmd_sync_status_sk to wait for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the BIG sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 42ecf19471 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Broadcast Receiver requires creating PA sync but the command just
generates a status so this makes use of __hci_cmd_sync_status_sk to wait
for HCI_EV_LE_PA_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the PA sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EV_LE_PA_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 4a5e0ba686 ("Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bring back previous offset calculation behaviour
in AF_XDP unaligned umem mode.
In unaligned mode, upper 16 bits should contain
data offset, lower 48 bits should contain
only specific chunk location without offset.
Remove pool->headroom duplication into 48bit address.
Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com>
Fixes: bea14124ba ("xsk: Get rid of xdp_buff_xsk::orig_addr")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://patch.msgid.link/20250416112925.7501-1-e.kubanski@partner.samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move rx_lock from xsk_socket to xsk_buff_pool.
Fix synchronization for shared umem mode in
generic RX path where multiple sockets share
single xsk_buff_pool.
RX queue is exclusive to xsk_socket, while FILL
queue can be shared between multiple sockets.
This could result in race condition where two
CPU cores access RX path of two different sockets
sharing the same umem.
Protect both queues by acquiring spinlock in shared
xsk_buff_pool.
Lock contention may be minimized in the future by some
per-thread FQ buffering.
It's safe and necessary to move spin_lock_bh(rx_lock)
after xsk_rcv_check():
* xs->pool and spinlock_init is synchronized by
xsk_bind() -> xsk_is_bound() memory barriers.
* xsk_rcv_check() may return true at the moment
of xsk_release() or xsk_unbind_dev(),
however this will not cause any data races or
race conditions. xsk_unbind_dev() removes xdp
socket from all maps and waits for completion
of all outstanding rx operations. Packets in
RX path will either complete safely or drop.
Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com>
Fixes: bf0bdd1343 ("xdp: fix race on generic receive path")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://patch.msgid.link/20250416101908.10919-1-e.kubanski@partner.samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove three functions that are no longer used.
rxrpc_get_txbuf() last use was removed by 2020's
commit 5e6ef4f101 ("rxrpc: Make the I/O thread take over the call and
local processor work")
rxrpc_kernel_get_epoch() last use was removed by 2020's
commit 44746355cc ("afs: Don't get epoch from a server because it may be
ambiguous")
rxrpc_kernel_set_max_life() last use was removed by 2023's
commit db099c625b ("rxrpc: Fix timeout of a call that hasn't yet been
granted a channel")
Both of the rxrpc_kernel_* functions were documented. Remove that
documentation as well as the code.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20250422235147.146460-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
Then, we may be going to add a route tied to a dying nexthop.
The nexthop itself is not freed during the RCU grace period, but
if we link a route after __remove_nexthop_fib() is called for the
nexthop, the route will be leaked.
To avoid the race between IPv6 route addition under RCU vs nexthop
deletion under RTNL, let's add a dead flag and protect it and
nh->f6i_list with a spinlock.
__remove_nexthop_fib() acquires the nexthop's spinlock and sets false
to nh->dead, then calls ip6_del_rt() for the linked route one by one
without the spinlock because fib6_purge_rt() acquires it later.
While adding an IPv6 route, fib6_add() acquires the nexthop lock and
checks the dead flag just before inserting the route.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-15-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The next patch adds per-nexthop spinlock which protects nh->f6i_list.
When rt->nh is not NULL, fib6_add_rt2node() will be called under the lock.
fib6_add_rt2node() could call fib6_purge_rt() for another route, which
could holds another nexthop lock.
Then, deadlock could happen between two nexthops.
Let's defer fib6_purge_rt() after fib6_add_rt2node().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-14-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
If the request specifies a new table ID, fib6_new_table() is
called to create a new routing table.
Two concurrent requests could specify the same table ID, so we
need a lock to protect net->ipv6.fib_table_hash[h].
Let's add a spinlock to protect the hash bucket linkage.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-13-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For MBSSID, each vif (struct ieee80211_vif) stores another vif
pointer for the transmitting profile of MBSSID set. This won't
suffice for MLO as there may be multiple links, each of which can
be part of different MBSSID sets. Hence the information needs to
be stored per-link. Additionally, the transmitted profile itself
may be part of an MLD hence storing vif will not suffice either.
Fix MLO by storing an instance of struct ieee80211_bss_conf
for each link.
Modify following operations to reflect the above structure updates:
- channel switch completion
- BSS color change completion
- Removing nontransmitted links in ieee80211_stop_mbssid()
- drivers retrieving the transmitted link for beacon templates.
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408184501.3715887-3-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During non-transmitted (nontx) profile configuration, interface
index of the transmitted (tx) profile is used to retrieve the
wireless device (wdev) associated with it. With MLO, this 'wdev'
may be part of an MLD with more than one link, hence only
interface index is not sufficient anymore to retrieve the correct
tx profile. Add a new attribute to configure link id of tx profile.
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408184501.3715887-2-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an AP and Non-AP MLD operates in EMLSR mode, EML capabilities
advertised during Association contains information such as EMLSR
transition delay, padding delay and transition timeout values.
Save the EML capabilities information that is received during station
addition and capabilities update in ieee80211_sta so that drivers can use
it for triggering EMLSR operation.
Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20250327051320.3253783-3-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Enhanced multi-link single-radio (EMLSR) operation allows a non-AP MLD
with multiple receive chains to listen on one or more EMLSR links when the
corresponding non-AP STA(s) affiliated with the non-AP MLD is (are) in
the awake state. [IEEE 802.11be-2024, (35.3.17 Enhanced multi-link
single-radio (EMLSR) operation)]
An MLD which intends to enable EMLSR operations will set the EML
Capabilities Present subfield to 1 and shall set the EMLSR Support
subfield in the Common Info field of the Basic Multi-Link element to 1 in
all Management frames that include the Basic Multi-Link element except
Authentication frames. EML capabilities contains information such as
EML Transition timeout, Padding delay and Transition delay. These fields
needs to updated to drivers to trigger EMLSR operation and to transmit and
receive initial control frame and data frames.
Add support to receive EML Capabilities subfield that non-AP MLD
advertises during (re)association request and send it to underlying
drivers during ADD/SET station.
Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20250327051320.3253783-2-quic_ramess@quicinc.com
[accept EMLSR capabilities only for unassoc AP STA]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 484a54c2e5. The CoDel
parameter change essentially disables CoDel on slow stations, with some
questionable assumptions, as Dave pointed out in [0]. Quoting from
there:
But here are my pithy comments as to why this part of mac80211 is so
wrong...
static void sta_update_codel_params(struct sta_info *sta, u32 thr)
{
- if (thr && thr < STA_SLOW_THRESHOLD * sta->local->num_sta) {
1) sta->local->num_sta is the number of associated, rather than
active, stations. "Active" stations in the last 50ms or so, might have
been a better thing to use, but as most people have far more than that
associated, we end up with really lousy codel parameters, all the
time. Mistake numero uno!
2) The STA_SLOW_THRESHOLD was completely arbitrary in 2016.
- sta->cparams.target = MS2TIME(50);
This, by itself, was probably not too bad. 30ms might have been
better, at the time, when we were battling powersave etc, but 20ms was
enough, really, to cover most scenarios, even where we had low rate
2Ghz multicast to cope with. Even then, codel has a hard time finding
any sane drop rate at all, with a target this high.
- sta->cparams.interval = MS2TIME(300);
But this was horrible, a total mistake, that is leading to codel being
completely ineffective in almost any scenario on clients or APS.
100ms, even 80ms, here, would be vastly better than this insanity. I'm
seeing 5+seconds of delay accumulated in a bunch of otherwise happily
fq-ing APs....
100ms of observed jitter during a flow is enough. Certainly (in 2016)
there were interactions with powersave that I did not understand, and
still don't, but if you are transmitting in the first place, powersave
shouldn't be a problemmmm.....
- sta->cparams.ecn = false;
At the time we were pretty nervous about ecn, I'm kind of sanguine
about it now, and reliably indicating ecn seems better than turning it
off for any reason.
[...]
In production, on p2p wireless, I've had 8ms and 80ms for target and
interval for years now, and it works great.
I think Dave's arguments above are basically sound on the face of it,
and various experimentation with tighter CoDel parameters in the OpenWrt
community have show promising results[1]. So I don't think there's any
reason to keep this parameter fiddling; hence this revert.
[0] https://lore.kernel.org/linux-wireless/CAA93jw6NJ2cmLmMauz0xAgC2MGbBq6n0ZiZzAdkK0u4b+O2yXg@mail.gmail.com/
[1] https://forum.openwrt.org/t/reducing-multiplexing-latencies-still-further-in-wifi/133605/130
Suggested-By: Dave Taht <dave.taht@gmail.com>
In-memory-of: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250403183930.197716-1-toke@toke.dk
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jason mentioned at netdevconf that we've run out of tx_flags in
the skb_shinfo(). Gain one bit back by removing the wifi bit.
We can do that because the only userspace application for it
(hostapd) doesn't change the setting on the socket, it just
uses different sockets, and normally doesn't even use this any
more, sending the frames over nl80211 instead.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250313134942.52ff54a140ec.If390bbdc46904cf451256ba989d7a056c457af6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 03df156dd3 ("xdp: double protect netdev->xdp_flags with
netdev->lock") introduces the netdev lock to xdp_set_features_flag().
The change includes a _locked version of the method, as it is possible
for a driver to have already acquired the netdev lock before calling
this helper. However, the same applies to
xdp_features_(set|clear)_redirect_flags(), which ends up calling the
unlocked version of xdp_set_features_flags() leading to deadlocks in
GVE, which grabs the netdev lock as part of its suspend, reset, and
shutdown processes:
[ 833.265543] WARNING: possible recursive locking detected
[ 833.270949] 6.15.0-rc1 #6 Tainted: G E
[ 833.276271] --------------------------------------------
[ 833.281681] systemd-shutdow/1 is trying to acquire lock:
[ 833.287090] ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: xdp_set_features_flag+0x29/0x90
[ 833.295470]
[ 833.295470] but task is already holding lock:
[ 833.301400] ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: gve_shutdown+0x44/0x90 [gve]
[ 833.309508]
[ 833.309508] other info that might help us debug this:
[ 833.316130] Possible unsafe locking scenario:
[ 833.316130]
[ 833.322142] CPU0
[ 833.324681] ----
[ 833.327220] lock(&dev->lock);
[ 833.330455] lock(&dev->lock);
[ 833.333689]
[ 833.333689] *** DEADLOCK ***
[ 833.333689]
[ 833.339701] May be due to missing lock nesting notation
[ 833.339701]
[ 833.346582] 5 locks held by systemd-shutdow/1:
[ 833.351205] #0: ffffffffa9c89130 (system_transition_mutex){+.+.}-{4:4}, at: __se_sys_reboot+0xe6/0x210
[ 833.360695] #1: ffff93b399e5c1b8 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xb4/0x1f0
[ 833.369144] #2: ffff949d19a471b8 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xc2/0x1f0
[ 833.377603] #3: ffffffffa9eca050 (rtnl_mutex){+.+.}-{4:4}, at: gve_shutdown+0x33/0x90 [gve]
[ 833.386138] #4: ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: gve_shutdown+0x44/0x90 [gve]
Introduce xdp_features_(set|clear)_redirect_target_locked() versions
which assume that the netdev lock has already been acquired before
setting the XDP feature flag and update GVE to use the locked version.
Fixes: 03df156dd3 ("xdp: double protect netdev->xdp_flags with netdev->lock")
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250422011643.3509287-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
p8022.c defines two external functions, register_8022_client()
and unregister_8022_client(), the last use of which was removed in
2018 by
commit 7a2e838d28 ("staging: ipx: delete it from the tree")
Remove the p8022.c file, it's corresponding header, and glue
surrounding it. There was one place the header was included in vlan.c
but it didn't use the functions it declared.
There was a comment in net/802/Makefile about checking
against net/core/Makefile, but that's at least 20 years old and
there's no sign of net/core/Makefile mentioning it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250418011519.145320-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FDB entries are currently stored in a hash table with a fixed number of
buckets (256), resulting in performance degradation as the number of
entries grows. Solve this by converting the driver to use rhashtable
which maintains more or less constant performance regardless of the
number of entries.
Measured transmitted packets per second using a single pktgen thread
with varying number of entries when the transmitted packet always hits
the default entry (worst case):
Number of entries | Improvement
------------------|------------
1k | +1.12%
4k | +9.22%
16k | +55%
64k | +585%
256k | +2460%
In addition, the change reduces the size of the VXLAN device structure
from 2584 bytes to 672 bytes.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-16-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, FDB entries are stored in a hash table with a fixed number of
buckets. The table is used for both lookups and entry traversal.
Subsequent patches will convert the table to rhashtable which is not
suitable for entry traversal.
In preparation for this conversion, add FDB entries to a linked list.
Subsequent patches will convert the driver to use this list when
traversing entries during dump, flush, etc.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-8-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the VXLAN driver stores FDB entries in a hash table with a
fixed number of buckets (256). Subsequent patches are going to convert
this table to rhashtable with a linked list for entry traversal, as
rhashtable is more scalable.
In preparation for this conversion, move from a per-bucket spin lock to
a single spin lock that protects the entire FDB table.
The per-bucket spin locks were introduced by commit fe1e0713bb
("vxlan: Use FDB_HASH_SIZE hash_locks to reduce contention") citing
"huge contention when inserting/deleting vxlan_fdbs into the fdb_head".
It is not clear from the commit message which code path was holding the
spin lock for long periods of time, but the obvious suspect is the FDB
cleanup routine (vxlan_cleanup()) that periodically traverses the entire
table in order to delete aged-out entries.
This will be solved by subsequent patches that will convert the FDB
cleanup routine to traverse the linked list of FDB entries using RCU,
only acquiring the spin lock when deleting an aged-out entry.
The change reduces the size of the VXLAN device structure from 3600
bytes to 2576 bytes.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-7-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Check PF capability flag whether the 4M, 1G, and 2G pages are
supported. Add these pages sizes to mana_ib, if supported.
Define possible page sizes in enum gdma_page_type and
remove unused enum atb_page_size.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1744621234-26114-4-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add IB_ZERO_BASED to the valid flags and use
the corresponding MR creation request for the zero
based memory.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1744621234-26114-3-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Kuniyuki reports that the assert for netdev lock fires when
there are netdev event listeners (otherwise we skip the netlink
event generation).
Correct the locking when coming from the notifier.
The NETDEV_XDP_FEAT_CHANGE notifier is already fully locked,
it's the documentation that's incorrect.
Fixes: 99e44f39a8 ("netdev: depend on netdev->lock for xdp features")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/20250410171019.62128-1-kuniyu@amazon.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250416030447.1077551-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add hardware offload configuration to XFRM_MSG_MIGRATE
using an option netlink attribute XFRMA_OFFLOAD_DEV.
In the existing xfrm_state_migrate(), the xfrm_init_state()
is called assuming no hardware offload by default. Even the
original xfrm_state is configured with offload, the setting will
be reset. If the device is configured with hardware offload,
it's reasonable to allow the device to maintain its hardware
offload mode. But the device will end up with offload disabled
after receiving a migration event when the device migrates the
connection from one netdev to another one.
The devices that support migration may work with different
underlying networks, such as mobile devices. The hardware setting
should be forwarded to the different netdev based on the
migration configuration. This change provides the capability
for user space to migrate from one netdev to another.
Test: Tested with kernel test in the Android tree located
in https://android.googlesource.com/kernel/tests/
The xfrm_tunnel_test.py under the tests folder in
particular.
Signed-off-by: Chiachang Wang <chiachangwang@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently, bnxt_en driver satisfies the requirements of the Device
memory TCP, which is HDS.
So, it implements rx-side Device memory TCP for bnxt_en driver.
It requires only converting the page API to netmem API.
`struct page` of agg rings are changed to `netmem_ref netmem` and
corresponding functions are changed to a variant of netmem API.
It also passes PP_FLAG_ALLOW_UNREADABLE_NETMEM flag to a parameter of
page_pool.
The netmem will be activated only when a user requests devmem TCP.
When netmem is activated, received data is unreadable and netmem is
disabled, received data is readable.
But drivers don't need to handle both cases because netmem core API will
handle it properly.
So, using proper netmem API is enough for drivers.
Device memory TCP can be tested with
tools/testing/selftests/drivers/net/hw/ncdevmem.
This is tested with BCM57504-N425G and firmware version 232.0.155.8/pkg
232.1.132.8.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: David Wei <dw@davidwei.uk>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250415052458.1260575-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the bonding ipsec offload operations to fix a number of
long-standing control plane races between state migration and user
deletion and a few other issues.
xfrm state deletion can happen concurrently with
bond_change_active_slave() operation. This manifests itself as a
bond_ipsec_del_sa() call with x->lock held, followed by a
bond_ipsec_free_sa() a bit later from a wq. The alternate path of
these calls coming from xfrm_dev_state_flush() can't happen, as that
needs the RTNL lock and bond_change_active_slave() already holds it.
1. bond_ipsec_del_sa_all() might call xdo_dev_state_delete() a second
time on an xfrm state that was concurrently killed. This is bad.
2. bond_ipsec_add_sa_all() can add a state on the new device, but
pending bond_ipsec_free_sa() calls from the old device will then hit
the WARN_ON() and then, worse, call xdo_dev_state_free() on the new
device without a corresponding xdo_dev_state_delete().
3. Resolve a sleeping in atomic context introduced by the mentioned
"Fixes" commit.
bond_ipsec_del_sa_all() and bond_ipsec_add_sa_all() now acquire x->lock
and check for x->km.state to help with problems 1 and 2. And since
xso.real_dev is now a private pointer managed by the bonding driver in
xfrm state, make better use of it to fully fix problems 1 and 2. In
bond_ipsec_del_sa_all(), set xso.real_dev to NULL while holding both the
mutex and x->lock, which makes sure that neither bond_ipsec_del_sa() nor
bond_ipsec_free_sa() could run concurrently.
Fix problem 3 by moving the list cleanup (which requires the mutex) from
bond_ipsec_del_sa() (called from atomic context) to bond_ipsec_free_sa()
Finally, simplify bond_ipsec_del_sa() and bond_ipsec_free_sa() by using
xso->real_dev directly, since it's now protected by locks and can be
trusted to always reflect the offload device.
Fixes: 2aeeef906d ("bonding: change ipsec_lock from spin lock to mutex")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Previously, device driver IPSec offload implementations would fall into
two categories:
1. Those that used xso.dev to determine the offload device.
2. Those that used xso.real_dev to determine the offload device.
The first category didn't work with bonding while the second did.
In a non-bonding setup the two pointers are the same.
This commit adds explicit pointers for the offload netdevice to
.xdo_dev_state_add() / .xdo_dev_state_delete() / .xdo_dev_state_free()
which eliminates the confusion and allows drivers from the first
category to work with bonding.
xso.real_dev now becomes a private pointer managed by the bonding
driver.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Before commit 40867d74c3 ("net: Add l3mdev index to flow struct and
avoid oif reset for port devices") it was possible to use FIB rules to
match on a L3 domain. This was done by having a FIB rule match on iif /
oif being a L3 master device. It worked because prior to the FIB rule
lookup the iif / oif fields in the flow structure were reset to the
index of the L3 master device to which the input / output device was
enslaved to.
The above scheme made it impossible to match on the original input /
output device. Therefore, cited commit stopped overwriting the iif / oif
fields in the flow structure and instead stored the index of the
enslaving L3 master device in a new field ('flowi_l3mdev') in the flow
structure.
While the change enabled new use cases, it broke the original use case
of matching on a L3 domain. Fix this by interpreting the iif / oif
matching on a L3 master device as a match against the L3 domain. In
other words, if the iif / oif in the FIB rule points to a L3 master
device, compare the provided index against 'flowi_l3mdev' rather than
'flowi_{i,o}if'.
Before cited commit, a FIB rule that matched on 'iif vrf1' would only
match incoming traffic from devices enslaved to 'vrf1'. With the
proposed change (i.e., comparing against 'flowi_l3mdev'), the rule would
also match traffic originating from a socket bound to 'vrf1'. Avoid that
by adding a new flow flag ('FLOWI_FLAG_L3MDEV_OIF') that indicates if
the L3 domain was derived from the output interface or the input
interface (when not set) and take this flag into account when evaluating
the FIB rule against the flow structure.
Avoid unnecessary checks in the data path by detecting that a rule
matches on a L3 master device when the rule is installed and marking it
as such.
Tested using the following script [1].
Output before 40867d74c3 (v5.4.291):
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
Output after 40867d74c3:
default dev dummy1 table 300 scope link
default dev dummy1 table 300 scope link
Output with this patch:
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
[1]
#!/bin/bash
ip link add name vrf1 up type vrf table 10
ip link add name dummy1 up master vrf1 type dummy
sysctl -wq net.ipv4.conf.all.forwarding=1
sysctl -wq net.ipv4.conf.all.rp_filter=0
ip route add table 100 default dev dummy1
ip route add table 200 default dev dummy1
ip route add table 300 default dev dummy1
ip rule add prio 0 oif vrf1 table 100
ip rule add prio 1 iif vrf1 table 200
ip rule add prio 2 table 300
ip route get 192.0.2.1 oif dummy1 fibmatch
ip route get 192.0.2.1 iif dummy1 from 198.51.100.1 fibmatch
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: hanhuihui <hanhuihui5@huawei.com>
Closes: https://lore.kernel.org/netdev/ec671c4f821a4d63904d0da15d604b75@huawei.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new helper function, nlmsg_payload(), to simplify checking and
retrieving Netlink message payloads.
This reduces boilerplate code for users who need to verify the message
length before accessing its data.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-1-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a follow-up of commit b68b106b0f ("mptcp: sched: reduce size
for unused data"), now removing the mptcp_sched_data structure.
Now is a good time to do that, because the previously mentioned WIP work
has been updated, no longer depending on this structure.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-1-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow the app to request that CHALLENGEs be passed to it through an
out-of-band queue that allows recvmsg() to pick it up so that the app can
add data to it with sendmsg().
This will allow the application (AFS or userspace) to interact with the
process if it wants to and put values into user-defined fields. This will
be used by AFS when talking to a fileserver to supply that fileserver with
a crypto key by which callback RPCs can be encrypted (ie. notifications
from the fileserver to the client).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A number of functions separately furnish an AF_RXRPC socket with callback
function pointers into a kernel app (such as the AFS filesystem) that is
using it. Replace most of these with an ops table for the entire socket.
This makes it easier to add more callback functions.
Note that the call incoming data processing callback is retaind as that
gets set to different things, depending on the type of op.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are no ->exit_batch_rtnl() users remaining.
Let's remove the hook.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-15-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_tunnel_delete_nets() iterates the dying netns list and performs the
same operations for each.
Let's export ip_tunnel_destroy() as ip_tunnel_delete_net() and call it
from ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct pernet_operations provides two batching hooks; ->exit_batch()
and ->exit_batch_rtnl().
The batching variant is beneficial if ->exit() meets any of the
following conditions:
1) ->exit() repeatedly acquires a global lock for each netns
2) ->exit() has a time-consuming operation that can be factored
out (e.g. synchronize_rcu(), smp_mb(), etc)
3) ->exit() does not need to repeat the same iterations for each
netns (e.g. inet_twsk_purge())
Currently, none of the ->exit_batch_rtnl() functions satisfy any of
the above conditions because RTNL is factored out and held by the
caller and all of these functions iterate over the dying netns list.
Also, we want to hold per-netns RTNL there but avoid spreading
__rtnl_net_lock() across multiple locations.
Let's add ->exit_rtnl() hook and run it under __rtnl_net_lock().
The following patches will convert all ->exit_batch_rtnl() users
to ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When enabling DMA mapping in page_pool, pages are kept DMA mapped until
they are released from the pool, to avoid the overhead of re-mapping the
pages every time they are used. This causes resource leaks and/or
crashes when there are pages still outstanding while the device is torn
down, because page_pool will attempt an unmap through a non-existent DMA
device on the subsequent page return.
To fix this, implement a simple tracking of outstanding DMA-mapped pages
in page pool using an xarray. This was first suggested by Mina[0], and
turns out to be fairly straight forward: We simply store pointers to
pages directly in the xarray with xa_alloc() when they are first DMA
mapped, and remove them from the array on unmap. Then, when a page pool
is torn down, it can simply walk the xarray and unmap all pages still
present there before returning, which also allows us to get rid of the
get/put_device() calls in page_pool. Using xa_cmpxchg(), no additional
synchronisation is needed, as a page will only ever be unmapped once.
To avoid having to walk the entire xarray on unmap to find the page
reference, we stash the ID assigned by xa_alloc() into the page
structure itself, using the upper bits of the pp_magic field. This
requires a couple of defines to avoid conflicting with the
POINTER_POISON_DELTA define, but this is all evaluated at compile-time,
so does not affect run-time performance. The bitmap calculations in this
patch gives the following number of bits for different architectures:
- 23 bits on 32-bit architectures
- 21 bits on PPC64 (because of the definition of ILLEGAL_POINTER_VALUE)
- 32 bits on other 64-bit architectures
Stashing a value into the unused bits of pp_magic does have the effect
that it can make the value stored there lie outside the unmappable
range (as governed by the mmap_min_addr sysctl), for architectures that
don't define ILLEGAL_POINTER_VALUE. This means that if one of the
pointers that is aliased to the pp_magic field (such as page->lru.next)
is dereferenced while the page is owned by page_pool, that could lead to
a dereference into userspace, which is a security concern. The risk of
this is mitigated by the fact that (a) we always clear pp_magic before
releasing a page from page_pool, and (b) this would need a
use-after-free bug for struct page, which can have many other risks
since page->lru.next is used as a generic list pointer in multiple
places in the kernel. As such, with this patch we take the position that
this risk is negligible in practice. For more discussion, see[1].
Since all the tracking added in this patch is performed on DMA
map/unmap, no additional code is needed in the fast path, meaning the
performance overhead of this tracking is negligible there. A
micro-benchmark shows that the total overhead of the tracking itself is
about 400 ns (39 cycles(tsc) 395.218 ns; sum for both map and unmap[2]).
Since this cost is only paid on DMA map and unmap, it seems like an
acceptable cost to fix the late unmap issue. Further optimisation can
narrow the cases where this cost is paid (for instance by eliding the
tracking when DMA map/unmap is a no-op).
The extra memory needed to track the pages is neatly encapsulated inside
xarray, which uses the 'struct xa_node' structure to track items. This
structure is 576 bytes long, with slots for 64 items, meaning that a
full node occurs only 9 bytes of overhead per slot it tracks (in
practice, it probably won't be this efficient, but in any case it should
be an acceptable overhead).
[0] https://lore.kernel.org/all/CAHS8izPg7B5DwKfSuzz-iOop_YRbk3Sd6Y4rX7KBG9DcVJcyWg@mail.gmail.com/
[1] https://lore.kernel.org/r/20250320023202.GA25514@openwall.com
[2] https://lore.kernel.org/r/ae07144c-9295-4c9d-a400-153bb689fe9e@huawei.com
Reported-by: Yonglong Liu <liuyonglong@huawei.com>
Closes: https://lore.kernel.org/r/8743264a-9700-4227-a556-5f931c720211@huawei.com
Fixes: ff7d6b27f8 ("page_pool: refurbish version of page_pool code")
Suggested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Tested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Tested-by: Qiuling Ren <qren@redhat.com>
Tested-by: Yuying Ma <yuma@redhat.com>
Tested-by: Yonglong Liu <liuyonglong@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409-page-pool-track-dma-v9-2-6a9ef2e0cba8@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
DCCP was removed, so tcp_or_dccp_get_hashinfo() should be renamed.
Let's rename it to tcp_get_hashinfo().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250410023921.11307-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCCP was removed, so many inet functions no longer need to
be exported.
Let's unexport or use EXPORT_IPV6_MOD() for such functions.
sk_free_unlock_clone() is inlined in sk_clone_lock() as it's
the only caller.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250410023921.11307-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCCP was orphaned in 2021 by commit 054c4610bd ("MAINTAINERS: dccp:
move Gerrit Renker to CREDITS"), which noted that the last maintainer
had been inactive for five years.
In recent years, it has become a playground for syzbot, and most changes
to DCCP have been odd bug fixes triggered by syzbot. Apart from that,
the only changes have been driven by treewide or networking API updates
or adjustments related to TCP.
Thus, in 2023, we announced we would remove DCCP in 2025 via commit
b144fcaf46 ("dccp: Print deprecation notice.").
Since then, only one individual has contacted the netdev mailing list. [0]
There is ongoing research for Multipath DCCP. The repository is hosted
on GitHub [1], and development is not taking place through the upstream
community. While the repository is published under the GPLv2 license,
the scheduling part remains proprietary, with a LICENSE file [2] stating:
"This is not Open Source software."
The researcher mentioned a plan to address the licensing issue, upstream
the patches, and step up as a maintainer, but there has been no further
communication since then.
Maintaining DCCP for a decade without any real users has become a burden.
Therefore, it's time to remove it.
Removing DCCP will also provide significant benefits to TCP. It allows
us to freely reorganize the layout of struct inet_connection_sock, which
is currently shared with DCCP, and optimize it to reduce the number of
cachelines accessed in the TCP fast path.
Note that we keep DCCP netfilter modules as requested. [3]
Link: https://lore.kernel.org/netdev/20230710182253.81446-1-kuniyu@amazon.com/T/#u #[0]
Link: https://github.com/telekom/mp-dccp #[1]
Link: https://github.com/telekom/mp-dccp/blob/mpdccp_v03_k5.10/net/dccp/non_gpl_scheduler/LICENSE #[2]
Link: https://lore.kernel.org/netdev/Z_VQ0KlCRkqYWXa-@calendula/ #[3]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM and SELinux)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://patch.msgid.link/20250410023921.11307-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP is in TIME_WAIT state, PAWS verification uses
LINUX_PAWSESTABREJECTED, which is ambiguous and cannot be distinguished
from other PAWS verification processes.
We added a new counter, like the existing PAWS_OLD_ACK one.
Also we update the doc with previously missing PAWS_OLD_ACK.
usage:
'''
nstat -az | grep PAWSTimewait
TcpExtPAWSTimewait 1 0.0
'''
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250409112614.16153-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devices in the networking path, such as firewalls, NATs, or routers, which
can perform SNAT or DNAT, use addresses from their own limited address
pools to masquerade the source address during forwarding, causing PAWS
verification to fail more easily.
Currently, packet loss statistics for PAWS can only be viewed through MIB,
which is a global metric and cannot be precisely obtained through tracing
to get the specific 4-tuple of the dropped packet. In the past, we had to
use kprobe ret to retrieve relevant skb information from
tcp_timewait_state_process().
We add a drop_reason pointer, similar to what previous commit does:
commit e34100c2ec ("tcp: add a drop_reason pointer to tcp_check_req()")
This commit addresses the PAWSESTABREJECTED case and also sets the
corresponding drop reason.
We use 'pwru' to test.
Before this commit:
''''
./pwru 'port 9999'
2025/04/07 13:40:19 Listening for events..
TUPLE FUNC
172.31.75.115:12345->172.31.75.114:9999(tcp) sk_skb_reason_drop(SKB_DROP_REASON_NOT_SPECIFIED)
'''
After this commit:
'''
./pwru 'port 9999'
2025/04/07 13:51:34 Listening for events..
TUPLE FUNC
172.31.75.115:12345->172.31.75.114:9999(tcp) sk_skb_reason_drop(SKB_DROP_REASON_TCP_RFC7323_TW_PAWS)
'''
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250409112614.16153-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink().
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr().
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wkGz
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink()
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr()
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority"
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
When I ran the repro [0] and waited a few seconds, I observed two
LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1]
Reproduction Steps:
1) Mount CIFS
2) Add an iptables rule to drop incoming FIN packets for CIFS
3) Unmount CIFS
4) Unload the CIFS module
5) Remove the iptables rule
At step 3), the CIFS module calls sock_release() for the underlying
TCP socket, and it returns quickly. However, the socket remains in
FIN_WAIT_1 because incoming FIN packets are dropped.
At this point, the module's refcnt is 0 while the socket is still
alive, so the following rmmod command succeeds.
# ss -tan
State Recv-Q Send-Q Local Address:Port Peer Address:Port
FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445
# lsmod | grep cifs
cifs 1159168 0
This highlights a discrepancy between the lifetime of the CIFS module
and the underlying TCP socket. Even after CIFS calls sock_release()
and it returns, the TCP socket does not die immediately in order to
close the connection gracefully.
While this is generally fine, it causes an issue with LOCKDEP because
CIFS assigns a different lock class to the TCP socket's sk->sk_lock
using sock_lock_init_class_and_name().
Once an incoming packet is processed for the socket or a timer fires,
sk->sk_lock is acquired.
Then, LOCKDEP checks the lock context in check_wait_context(), where
hlock_class() is called to retrieve the lock class. However, since
the module has already been unloaded, hlock_class() logs a warning
and returns NULL, triggering the null-ptr-deref.
If LOCKDEP is enabled, we must ensure that a module calling
sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded
while such a socket is still alive to prevent this issue.
Let's hold the module reference in sock_lock_init_class_and_name()
and release it when the socket is freed in sk_prot_free().
Note that sock_lock_init() clears sk->sk_owner for svc_create_socket()
that calls sock_lock_init_class_and_name() for a listening socket,
which clones a socket by sk_clone_lock() without GFP_ZERO.
[0]:
CIFS_SERVER="10.0.0.137"
CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST"
DEV="enp0s3"
CRED="/root/WindowsCredential.txt"
MNT=$(mktemp -d /tmp/XXXXXX)
mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1
iptables -A INPUT -s ${CIFS_SERVER} -j DROP
for i in $(seq 10);
do
umount ${MNT}
rmmod cifs
sleep 1
done
rm -r ${MNT}
iptables -D INPUT -s ${CIFS_SERVER} -j DROP
[1]:
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
...
Call Trace:
<IRQ>
__lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178)
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
...
BUG: kernel NULL pointer dereference, address: 00000000000000c4
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__lock_acquire (kernel/locking/lockdep.c:4852 kernel/locking/lockdep.c:5178)
Code: 15 41 09 c7 41 8b 44 24 20 25 ff 1f 00 00 41 09 c7 8b 84 24 a0 00 00 00 45 89 7c 24 20 41 89 44 24 24 e8 e1 bc ff ff 4c 89 e7 <44> 0f b6 b8 c4 00 00 00 e8 d1 bc ff ff 0f b6 80 c5 00 00 00 88 44
RSP: 0018:ffa0000000468a10 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ff1100010091cc38 RCX: 0000000000000027
RDX: ff1100081f09ca48 RSI: 0000000000000001 RDI: ff1100010091cc88
RBP: ff1100010091c200 R08: ff1100083fe6e228 R09: 00000000ffffbfff
R10: ff1100081eca0000 R11: ff1100083fe10dc0 R12: ff1100010091cc88
R13: 0000000000000001 R14: 0000000000000000 R15: 00000000000424b1
FS: 0000000000000000(0000) GS:ff1100081f080000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c4 CR3: 0000000002c4a003 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (./include/linux/rcupdate.h:878 net/ipv4/ip_input.c:234)
ip_sublist_rcv_finish (net/ipv4/ip_input.c:576)
ip_list_rcv_finish (net/ipv4/ip_input.c:628)
ip_list_rcv (net/ipv4/ip_input.c:670)
__netif_receive_skb_list_core (net/core/dev.c:5939 net/core/dev.c:5986)
netif_receive_skb_list_internal (net/core/dev.c:6040 net/core/dev.c:6129)
napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:519 ./include/net/gro.h:514 net/core/dev.c:6496)
e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3815)
__napi_poll.constprop.0 (net/core/dev.c:7191)
net_rx_action (net/core/dev.c:7262 net/core/dev.c:7382)
handle_softirqs (kernel/softirq.c:561)
__irq_exit_rcu (kernel/softirq.c:596 kernel/softirq.c:435 kernel/softirq.c:662)
irq_exit_rcu (kernel/softirq.c:680)
common_interrupt (arch/x86/kernel/irq.c:280 (discriminator 14))
</IRQ>
<TASK>
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:693)
RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:744)
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d c3 2b 15 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffa00000000ffee8 EFLAGS: 00000202
RAX: 000000000000640b RBX: ff1100010091c200 RCX: 0000000000061aa4
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff812f30c5
RBP: 000000000000000a R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118)
do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
cpu_startup_entry (kernel/sched/idle.c:422 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:315)
common_startup_64 (arch/x86/kernel/head_64.S:421)
</TASK>
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CR2: 00000000000000c4
Fixes: ed07536ed6 ("[PATCH] lockdep: annotate nfs/nfsd in-kernel sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250407163313.22682-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We mostly needed rtnl_lock in qstat to make sure the queue count
is stable while we work. For "ops locked" drivers the instance
lock protects the queue count, so we don't have to take rtnl_lock.
For currently ops-locked drivers: netdevsim and bnxt need
the protection from netdev going down while we dump, which
instance lock provides. gve doesn't care.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect xdp_features with netdev->lock. This way pure readers
no longer have to take rtnl_lock to access the field.
This includes calling NETDEV_XDP_FEAT_CHANGE under the lock.
Looks like that's fine for bonding, the only "real" listener,
it's the same as ethtool feature change.
In terms of normal drivers - only GVE need special consideration
(other drivers don't use instance lock or don't support XDP).
It calls xdp_set_features_flag() helper from gve_init_priv() which
in turn is called from gve_reset_recovery() (locked), or prior
to netdev registration. So switch to _locked.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250408195956.412733-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers to "lock a netdev in a backward-compatible way",
which for ops-locked netdevs will mean take the instance lock.
For drivers which haven't opted into the ops locking we'll take
rtnl_lock.
The scoped foreach is dropping and re-taking the lock for each
device, even if prev and next are both under rtnl_lock.
I hope that's fine since we expect that netdev nl to be mostly
supported by modern drivers, and modern drivers should also
opt into the instance locking.
Note that these helpers are mostly needed for queue related state,
because drivers modify queue config in their ops in a non-atomic
way. Or differently put, queue changes don't have a clear-cut API
like NAPI configuration. Any state that can should just use the
instance lock directly, not the "compat" hacks.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Read accesses go via xsk_get_pool_from_qid(), the call coming
from the core and gve look safe (other "ops locked" drivers
don't support XSK).
Write accesses go via xsk_reg_pool_at_qid() and xsk_clear_pool_at_qid().
Former is already under the ops lock, latter is not (both coming from
the workqueue via xp_clear_dev() and NETDEV_UNREGISTER via xsk_notifier()).
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's quite common to have a single UDP tunnel type active in the
whole system. In such a case we can replace the indirect call for
the UDP tunnel GRO callback with a static call.
Add the related accounting in the control path and switch to static
call when possible. To keep the code simple use a static array for
the registered tunnel types, and size such array based on the kernel
config.
Note that there are valid kernel configurations leading to
UDP_MAX_TUNNEL_TYPES == 0 even with IS_ENABLED(CONFIG_NET_UDP_TUNNEL),
Explicitly skip the accounting in such a case, to avoid compile warning
when accessing "udp_tunnel_gro_types".
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/53d156cdfddcc9678449e873cc83e68fa1582653.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most UDP tunnels bind a socket to a local port, with ANY address, no
peer and no interface index specified.
Additionally it's quite common to have a single tunnel device per
namespace.
Track in each namespace the UDP tunnel socket respecting the above.
When only a single one is present, store a reference in the netns.
When such reference is not NULL, UDP tunnel GRO lookup just need to
match the incoming packet destination port vs the socket local port.
The tunnel socket never sets the reuse[port] flag[s]. When bound to no
address and interface, no other socket can exist in the same netns
matching the specified local port.
Matching packets with non-local destination addresses will be
aggregated, and eventually segmented as needed - no behavior changes
intended.
Restrict the optimization to kernel sockets only: it covers all the
relevant use-cases, and user-space owned sockets could be disconnected
and rebound after setup_udp_tunnel_sock(), breaking the uniqueness
assumption
Note that the UDP tunnel socket reference is stored into struct
netns_ipv4 for both IPv4 and IPv6 tunnels. That is intentional to keep
all the fastpath-related netns fields in the same struct and allow
cacheline-based optimization. Currently both the IPv4 and IPv6 socket
pointer share the same cacheline as the `udp_table` field.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/41d16bc8d1257d567f9344c445b4ae0b4a91ede4.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an rcu_head to sd_flow_limit and rps_sock_flow_table structs
to use the more conventional and predictable k[v]free_rcu().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250407163602.170356-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.
There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().
This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.
This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c5 ("sctp: remove the dead field of sctp_transport").
Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.
If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.
The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]).
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport.txt [1]
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport__repro.c [2]
Cc: stable@vger.kernel.org
Fixes: df132eff46 ("sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250404-kasan_slab-use-after-free_read_in_sctp_outq_select_transport__20250404-v1-1-5ce4a0b78ef2@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
devmem code performs a number of safety checks to avoid having
to reimplement all of them in the drivers. Move those to
__net_mp_open_rxq() and reuse that function for binding to make
sure that io_uring ZC also benefits from them.
While at it rename the queue ID variable to rxq_idx in
__net_mp_open_rxq(), we touch most of the relevant lines.
The XArray insertion is reordered after the netdev_rx_queue_restart()
call, otherwise we'd need to duplicate the queue index check
or risk inserting an invalid pointer. The XArray allocation
failures should be extremely rare.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: 6e18ed929d ("net: add helpers for setting a memory provider on an rx queue")
Link: https://patch.msgid.link/20250403013405.2827250-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to exercise and verify notifiers' locking assumptions,
register dummy notifiers (via register_netdevice_notifier_dev_net).
Share notifier event handler that enforces the assumptions with
lock_debug.c (rename and export rtnl_net_debug_event as
netdev_debug_event). Add ops lock asserts to netdev_debug_event.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_add_dev might call dev_disable_lro which unconditionally grabs
instance lock, so it will deadlock during NETDEV_REGISTER. Switch
to netif_disable_lro.
Make sure all callers hold the instance lock as well.
Cc: Cosmin Ratiu <cratiu@nvidia.com>
Fixes: ad7c7b2172 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc",
error queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported,
avoid spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=BDoM
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
Uros Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was founf to be incorrect.
- The 4 patch series "Some cleanup for memcg" from Chen Ridong
implements some relatively monir cleanups for the memcontrol code.
- The 17 patch series "mm: fixes for device-exclusive entries (hmm)"
from David Hildenbrand fixes a boatload of issues which David found then
using device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now succeed.
- The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry
Ahmed remove the z3fold and zbud implementations. They have been
deprecated for half a year and nobody has complained.
- The 5 patch series "mm: further simplify VMA merge operation" from
Lorenzo Stoakes implements numerous simplifications in this area. No
runtime effects are anticipated.
- The 4 patch series "mm/madvise: remove redundant mmap_lock operations
from process_madvise()" from SeongJae Park rationalizes the locking in
the madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The 12 patch series "Tiny cleanup and improvements about SWAP code"
from Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The 2 patch series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak user-visible
output.
- The 2 patch series "mm/damon/paddr: fix large folios access and
schemes handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The 3 patch series "mm/damon/core: fix wrong and/or useless
damos_walk() behaviors" from SeongJae Park fixes a few issues with the
accuracy of kdamond's walking of DAMON regions.
- The 3 patch series "expose mapping wrprotect, fix fb_defio use" from
Lorenzo Stoakes changes the interaction between framebuffer deferred-io
and core MM. No functional changes are anticipated - this is
preparatory work for the future removal of page structure fields.
- The 4 patch series "mm/damon: add support for hugepage_size DAMOS
filter" from Usama Arif adds a DAMOS filter which permits the filtering
by huge page sizes.
- The 4 patch series "mm: permit guard regions for file-backed/shmem
mappings" from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The 4 patch series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping for
pte-mapped large folios.
- The 18 patch series "reimplement per-vma lock as a refcount" from
Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation
fixes and improves" from SeongJae Park does some maintenance work on the
DAMON docs.
- The 27 patch series "hugetlb/CMA improvements for large systems" from
Frank van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped
pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The 19 patch series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The 12 patch series "selftests/mm: Some cleanups from trying to run
them" from Brendan Jackman fixes a pile of unrelated issues which
Brendan encountered while runnimg our selftests.
- The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap"
from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply wasn't
being effective.
- The 5 patch series "mm: cleanups for device-exclusive entries (hmm)"
from David Hildenbrand implements a number of unrelated cleanups in this
code.
- The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman
Khandual implements a number of preparatoty cleanups to the
GENERIC_PTDUMP Kconfig logic.
- The 8 patch series "mm/damon: auto-tune aggregation interval" from
SeongJae Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some
issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did
this in preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The 2 patch series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the code
easier to follow.
- The 3 patch series "page_counter cleanup and size reduction" from
Shakeel Butt cleans up the page_counter code and fixes a size increase
which we accidentally added late last year.
- The 3 patch series "Add a command line option that enables control of
how many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The 3 patch series "Fix calculations in trace_balance_dirty_pages()
for cgwb" from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The 9 patch series "mm/damon: make allow filters after reject filters
useful and intuitive" from SeongJae Park improves the handling of allow
and reject filters. Behaviour is made more consistent and the
documention is updated accordingly.
- The 5 patch series "Switch zswap to object read/write APIs" from Yosry
Ahmed updates zswap to the new object read/write APIs and thus permits
the removal of some legacy code from zpool and zsmalloc.
- The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang
does as it claims.
- The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts"
from Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes
is a preparatoty refactoring and cleanup of the mremap() code.
- The 20 patch series "mm: MM owner tracking for large folios (!hugetlb)
+ CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS
filters based on handling layers" from SeongJae Park adds a couple of
new sysfs directories to ease the management of DAMON/DAMOS filters.
- The 13 patch series "arch, mm: reduce code duplication in mem_init()"
from Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The 13 patch series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The 3 patch series "mm: page_ext: Introduce new iteration API" from
Luiz Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The 8 patch series "Buddy allocator like (or non-uniform) folio split"
from Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios are
generated.
- The 2 patch series "Minimize xa_node allocation during xarry split"
from Zi Yan reduces the number of xarray xa_nodes which are generated
during an xarray split.
- The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The 3 patch series "Add tracepoints for lowmem reserves, watermarks
and totalreserve_pages" from Martin Liu adds some more tracepoints to
the page allocator code.
- The 4 patch series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which SeongJae
observed during his earlier madvise work.
- The 3 patch series "mm/hwpoison: Fix regressions in memory failure
handling" from Shuai Xue addresses two quite serious regressions which
Shuai has observed in the memory-failure implementation.
- The 5 patch series "mm: reliable huge page allocator" from Johannes
Weiner makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The 5 patch series "Minor memcg cleanups & prep for memdescs" from
Matthew Wilcox is preparatory work for the future implementation of
memdescs.
- The 4 patch series "track memory used by balloon drivers" from Nico
Pache introduces a way to track memory used by our various balloon
drivers.
- The 2 patch series "mm/damon: introduce DAMOS filter type for active
pages" from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The 2 patch series "Adding Proactive Memory Reclaim Statistics" from
Hao Jia separates the proactive reclaim statistics from the direct
reclaim statistics.
- The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio"
from Jinjiang Tu fixes our handling of hwpoisoned pages within the
reclaim code.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA
jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF
Ee93qSSLR1BkNdDw+931Pu0mXfbnBw==
=Pn2K
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
This reverts commit 0de2a5c4b8.
I forgot that a TCP socket could receive messages in its error queue.
sock_queue_err_skb() can be called without socket lock being held,
and changes sk->sk_rmem_alloc.
The fact that skbs in error queue are limited by sk->sk_rcvbuf
means that error messages can be dropped if socket receive
queues are full, which is an orthogonal issue.
In future kernels, we could use a separate sk->sk_error_mem_alloc
counter specifically for the error queue.
Fixes: 0de2a5c4b8 ("tcp: avoid atomic operations on sk->sk_rmem_alloc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250331075946.31960-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser, mlx5,
vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting in-kernel
verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism to
access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ+ap4gAKCRCFwuHvBreF
YaFHAP9wyeZCZIbnWaGcbNdbsmkEgy7aTVILRHf1NA7VSJ211gD9Ha60E+mkwtvA
i7IJ49R2BdqzKaO9oTutj2Lw+8rABwQ=
=qXhh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser,
mlx5, vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting
in-kernel verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism
to access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (73 commits)
IB/mad: Check available slots before posting receive WRs
RDMA/mana_ib: Fix integer overflow during queue creation
RDMA/mlx5: Fix calculation of total invalidated pages
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
RDMA/mlx5: Fix page_size variable overflow
RDMA/mlx5: Drop access_flags from _mlx5_mr_cache_alloc()
RDMA/mlx5: Fix cache entry update on dereg error
RDMA/mlx5: Fix MR cache initialization error flow
RDMA/mlx5: Support optional-counters binding for QPs
RDMA/mlx5: Compile fs.c regardless of INFINIBAND_USER_ACCESS config
RDMA/core: Pass port to counter bind/unbind operations
RDMA/core: Add support to optional-counters binding configuration
RDMA/core: Create and destroy rdma_counter using rdma_zalloc_drv_obj()
RDMA/mlx5: Add optional counters for RDMA_TX/RX_packets/bytes
RDMA/core: Fix use-after-free when rename device name
RDMA/bnxt_re: Support perf management counters
RDMA/rxe: Fix incorrect return value of rxe_odp_atomic_op()
RDMA/uverbs: Propagate errors from rdma_lookup_get_uobject()
RDMA/mana_ib: Handle net event for pointing to the current netdev
net: mana: Change the function signature of mana_get_primary_netdev_rcu
...
Core & protocols
----------------
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls).
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked)
in BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream performance
up to 2x.
- Improve performance of contended connect() by 200% by searching
for an available 4-tuple under RCU rather than a spin lock.
Bring an additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles.
There are up to 4 namespace roles but we used to have just 2 netns
pointer arguments, interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout
in TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar
to normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name
to messages as metadata
Driver API
----------
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where possible.
Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers
--------------
- Remove the IBM LCS driver for s390.
- Remove the sb1000 cable modem driver.
- Add support for SFP module access over SMBus.
- Add MCTP transport driver for MCTP-over-USB.
- Enable XDP metadata support in multiple drivers.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96% with
1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XY0S
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
Merge in late fixes to prepare for the 6.15 net-next PR.
No conflicts, adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
919f9f497d ("eth: bnxt: fix out-of-range access of vnic_info array")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After merging the apparmor tree, today's linux-next build (x86_64
allmodconfig) failed like this:
security/apparmor/af_unix.c: In function 'unix_state_double_lock':
security/apparmor/af_unix.c:627:17: error: implicit declaration of function 'unix_state_lock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
627 | unix_state_lock(sk1);
| ^~~~~~~~~~~~~~~
| unix_state_double_lock
security/apparmor/af_unix.c: In function 'unix_state_double_unlock':
security/apparmor/af_unix.c:642:17: error: implicit declaration of function 'unix_state_unlock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
642 | unix_state_unlock(sk1);
| ^~~~~~~~~~~~~~~~~
| unix_state_double_lock
Caused by commit
c05e705812 ("apparmor: add fine grained af_unix mediation")
interacting with commit
84960bf240 ("af_unix: Move internal definitions to net/unix/.")
from the net-next tree.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patch.msgid.link/20250326150148.72d9138d@canb.auug.org.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like what
I did last cycle for the CRC32 and CRC-T10DIF library functions.
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme.
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme.
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since they
are no longer needed there.
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect.
- Add kunit test cases for crc64_nvme and crc7.
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c().
- Remove unnecessary prompts from some of the CRC kconfig options.
- Further optimize the x86 crc32c code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CGGhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3wRAP4tbnzawUmlIHIF0hleoADXehUgAhMt
NZn15mGvyiuwIQEA8W9qvnLdFXZkdxhxAEvDDFjyrRauL6eGtr/GvCx4AQY=
=wmKG
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
-----BEGIN PGP SIGNATURE-----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=XCdn
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
* tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (53 commits)
Bluetooth: MGMT: Add LL Privacy Setting
Bluetooth: hci_event: Fix handling of HCI_EV_LE_DIRECT_ADV_REPORT
Bluetooth: btnxpuart: Fix kernel panic during FW release
Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7
Bluetooth: btnxpuart: Add correct bootloader error codes
t blameBluetooth: btintel: Fix leading white space
Bluetooth: btintel: Add support to configure TX power
Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal
Bluetooth: btmtk: Remove the resetting step before downloading the fw
Bluetooth: SCO: add TX timestamping
Bluetooth: L2CAP: add TX timestamping
Bluetooth: ISO: add TX timestamping
Bluetooth: add support for skb TX SND/COMPLETION timestamping
net-timestamp: COMPLETION timestamp on packet tx completion
HCI: coredump: Log devcd dumps into the monitor
Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel
Bluetooth: hci_vhci: Mark Sync Flow Control as supported
Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO
Bluetooth: btintel_pci: Fix build warning
Bluetooth: btintel_pcie: Trigger device coredump on hardware exception
...
====================
Link: https://patch.msgid.link/20250325192925.2497890-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds LL Privacy (bit 22) to Read Controller Information so the likes
of bluetoothd(1) can detect when the controller supports it or not.
Fixes: e209e5ccc5 ("Bluetooth: MGMT: Mark LL Privacy as stable")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
icsk->icsk_ack.timeout can be replaced by icsk->csk_delack_timer.expires
This saves 8 bytes in TCP/DCCP sockets and helps for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250324203607.703850-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icsk->icsk_timeout can be replaced by icsk->icsk_retransmit_timer.expires
This saves 8 bytes in TCP/DCCP sockets and helps for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250324203607.703850-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev netlink is the only reader of netdev_{,rx_}queue->napi,
and it already holds netdev->lock. Switch protection of
the writes to netdev->lock to "ops protected".
The expectation will be now that accessing queue->napi
will require netdev->lock for "ops locked" drivers, and
rtnl_lock for all other drivers.
Current "ops locked" drivers don't require any changes.
gve and netdevsim use _locked() helpers right next to
netif_queue_set_napi() so they must be holding the instance
lock. iavf doesn't call it. bnxt is a bit messy but all paths
seem locked.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Try to define some terminology for which fields are protected
by which lock and how. Some fields are protected by both rtnl_lock
and instance lock which is hard to talk about without having
a "key phrase" to refer to a particular protection scheme.
"ops protected" fields are defined later in the series, one by one.
Add ASSERT_RTNL() to netdev_ops_assert_locked() for drivers
not other instance protection of ops. Hopefully it's not too
confusion that netdev_lock_ops() does not match the lock which
netdev_ops_assert_locked() will assert, exactly. The noun "ops"
is in a different place in the name, so I think it's acceptable...
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lockdep asserts and predicates can operate on const pointers.
In the future this will let us add asserts in functions
which operate on const pointers like dev_get_min_mp_channel_count().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support TX timestamping in L2CAP sockets.
Support MSG_ERRQUEUE recvmsg.
For other than SOCK_STREAM L2CAP sockets, if a packet from sendmsg() is
fragmented, only the first ACL fragment is timestamped.
For SOCK_STREAM L2CAP sockets, use the bytestream convention and
timestamp the last fragment and count bytes in tskey.
Timestamps are not generated in the Enhanced Retransmission mode, as
meaning of COMPLETION stamp is unclear if L2CAP layer retransmits.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add BT_SCM_ERROR socket CMSG type.
Support TX timestamping in ISO sockets.
Support MSG_ERRQUEUE in ISO recvmsg.
If a packet from sendmsg() is fragmented, only the first ACL fragment is
timestamped.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support enabling TX timestamping for some skbs, and track them until
packet completion. Generate software SCM_TSTAMP_COMPLETION when getting
completion report from hardware.
Generate software SCM_TSTAMP_SND before sending to driver. Sending from
driver requires changes in the driver API, and drivers mostly are going
to send the skb immediately.
Make the default situation with no COMPLETION TX timestamping more
efficient by only counting packets in the queue when there is nothing to
track. When there is something to track, we need to make clones, since
the driver may modify sent skbs.
The tx_q queue length is bounded by the hdev flow control, which will
not send new packets before it has got completion reports for old ones.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Return Parameters is not only status, also bdaddr:
BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E
page 1870:
BLUETOOTH CORE SPECIFICATION Version 5.0 | Vol 2, Part E
page 802:
Return parameters:
Status:
Size: 1 octet
BD_ADDR:
Size: 6 octets
Note that it also fixes the warning:
"Bluetooth: hci0: unexpected cc 0x041a length: 7 > 1"
Fixes: c8992cffbe ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_PAGE_SCAN_TYPE.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_VOICE_SETTING.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() for readability.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mgmt_start_discovery_complete() and mgmt_stop_discovery_complete() last
uses were removed in 2022 by
commit ec2904c259 ("Bluetooth: Remove dead code from hci_request.c")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Revert "udp_tunnel: use static call for GRO hooks when possible"
This reverts commit 311b36574c.
Revert "udp_tunnel: create a fastpath GRO lookup."
This reverts commit 8d4880db37.
There are multiple small issues with the series. In the interest
of unblocking the merge window let's opt for a revert.
Link: https://lore.kernel.org/cover.1742557254.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
