mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-04 02:25:58 +00:00
loongarch-next
2283 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dongcheng Yan
|
a032fe30cf |
platform/x86: int3472: add hpd pin support
Typically HDMI to MIPI CSI-2 bridges have a pin to signal image data is
being received. On the host side this is wired to a GPIO for polling or
interrupts. This includes the Lontium HDMI to MIPI CSI-2 bridges
lt6911uxe and lt6911uxc.
The GPIO "hpd" is used already by other HDMI to CSI-2 bridges, use it
here as well.
Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes:
|
||
|
Linus Torvalds
|
be413ec746 |
hwmon updates for v6.17
* Updated chip support in existing drivers - ina238: Support for INA228 - pmbus/tps53679: Support for TPS53685 - pmbus/adp1050: Support for adp1051, adp1055 and ltp8800 - corsair-psu: Support for HX1200i Series 2025 - pmbus/isl68137: Support for RAA229621 - asus-ec-sensors: Support for ProArt X870E-CREATOR WIFI and * Other notable changes - adt7475: Support for #pwm-cells = <3> - amc6821: Cooling device support - emc2305: Support for PWM frequency, polarity and output - Add missing compatible entries to various devicetree bindings * Various other minor fixes and improvements -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmiLiv4ACgkQyx8mb86f mYHCpxAAjHqk1OraRteQoUp0xT8YqSxDCvW8BSCvHSotGKdk5t2Ad9C0rqTqtKzT s0jo1h/dIqVfe1c7siOnAZEoqEVmbUfWJhxMSpMsDCSysJ8lEfP/ofWn4L2GxAyt v60cv9hNZbyeFxCXEe9XFFG2I39kKY1isj8gPiS7HHzDp5PAdSZTjhyV03NgWJJ0 L+aJ9sw5TKMWG6hs4OgkbeAllg2G5oXbZ9AOXhBE71DAIub8lxk+UyJHOng6ecBe I7eAwFKLscOtEd1xzt0FBlHM/0OHj+A+yGwjHVhwXkKgNIN53t/OLLjADTbuVv51 1nW9IAOJHtQ4OzD3MTnQEL+BIC37JbDlPX7VnhHTgYGwJhM5Pj5yUtHLqTlURUfH rZiLhjyGLWKIMGShVXzbKxcyVscMouLTnfn4ZXDjlDzPXOgz5Ha9+Fs3Gd+QP17D Y/w7pIQMA3A0f1FOxlLyRayjcPElb9vmNF2cacxPeqN2EJYRn+8tfYC6290sKBt1 HrCeAVdXLbGCvPFBdC8w8derjQOvkPi+6a07PtUR7BB+QjO23R6FeuzpOFMBucV+ c1q/F2d1gOP2gvtYTz5H2OvLhAKe/FnSEWlVB28C3pTrmpBs+3AkvDSBlSvZ3sIn vLGCVBrSI3SqxwOCnGPwGw4fxbdSrKO9OwRGOjWXxdgNOPDRWog= =6w+m -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Updated chip support in existing drivers: - ina238: Support for INA228 - pmbus/tps53679: Support for TPS53685 - pmbus/adp1050: Support for adp1051, adp1055 and ltp8800 - corsair-psu: Support for HX1200i Series 2025 - pmbus/isl68137: Support for RAA229621 - asus-ec-sensors: Support for ProArt X870E-CREATOR WIFI and Other notable changes: - adt7475: Support for #pwm-cells = <3> - amc6821: Cooling device support - emc2305: Support for PWM frequency, polarity and output - Add missing compatible entries to various devicetree bindings And various other minor fixes and improvements" * tag 'hwmon-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (34 commits) dt-bindings: hwmon: Replace bouncing Alexandru Tachici emails hwmon: (ina238) Add support for INA228 dt-bindings: Add INA228 to ina2xx devicetree bindings hwmon: (ina238) Fix inconsistent whitespace dt-bindings: hwmon: adt7475: Allow and recommend #pwm-cells = <3> hwmon: (adt7475) Implement support for #pwm-cells = <3> hwmon: (pmbus/tps53679) Add support for TPS53685 dt-bindings: trivial: Add tps53685 support hwmon: (pmbus/adp1050) Add regulator support for ltp8800 hwmon: (pmbus/adp1050) Add support for adp1051, adp1055 and ltp8800 dt-bindings: hwmon: pmbus/adp1050: Add adp1051, adp1055 and ltp8800 hwmon: (max31827) use sysfs_emit() in temp1_resolution_show() hwmon: (ltc4282) convert from round_rate() to determine_rate() hwmon: (corsair-psu) add support for HX1200i Series 2025 dt-bindings: hwmon: pmbus: ti,ucd90320: Add missing compatibles dt-bindings: hwmon: maxim,max20730: Add maxim,max20710 compatible dt-bindings: hwmon: lltc,ltc2978: Add lltc,ltc713 compatible dt-bindings: hwmon: ti,lm87: Add adi,adm1024 compatible dt-bindings: hwmon: national,lm90: Add missing Dallas max6654 and onsemi nct72, nct214, and nct218 hwmon: (w83627ehf) make the read-only arrays 'bit' static const ... |
||
|
Linus Torvalds
|
260f6f4fda |
drm for 6.17-rc1
non-drm: rust: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings mtd: - driver for Intel GPU non-volatile storage i2c - designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmiJM/0ACgkQDHTzWXnE hr6MpA/+JJKGdSdrE95QkaMcOZh/3e3areGXZ0V/RrrJXdB4/DoAfQSHhF0H7m7y MhBGVLGNMXq7KHrz28p1MjLHrE1mwmvJ6hZ4J076ed4u9naoCD0m6k5w5wiue+KL HyPR54ADxN0BYmgV0l/B0wj42KsHyTO4x4hdqPJu02V9Dtmx6FCh2ujkOF3p9nbK GMwWDttl4KEKljD0IvQ9YIYJ66crYGx/XmZi7JoWRrS104K/h1u8qZuXBp5jVKTy OZRAVyLdmJqdTOLH7l599MBBcEd/bNV37/LVwF4T5iFunEKOAiyN0QY0OR+IeRVh ZfOv2/gp4UNyIfyahQ7LKLgEilNPGHoPitvDJPvBZxW2UjwXVNvA1QfdK5DAlVRS D5NoFRjlFFCz8/c2hQwlKJ9o7eVgH3/pK0mwR7SPGQTuqzLFCrAfCuzUvg/gV++6 JFqmGKMHeCoxO2o4GMrwjFttStP41usxtV/D+grcbPteNO9UyKJS4C38n4eamJXM a9Sy9APuAb6F0w5+yMItEF7TQifgmhIbm5AZHlxE1KoDQV6TdiIf1Gou5LeDGoL6 OACbXHJPL52tUnfCRpbfI4tE/IVyYsfL01JnvZ5cZZWItXfcIz76ykJri+E0G60g yRl/zkimHKO4B0l/HSzal5xROXr+3VzeWehEiz/ot1VriP5OesA= =n9MO -----END PGP SIGNATURE----- Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ... |
||
|
Linus Torvalds
|
8be4d31cb8 |
Networking changes for 6.17.
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
||
|
Linus Torvalds
|
0d5ec7919f |
Char / Misc / IIO / other driver updates for 6.17-rc1
Here is the big set of char/misc/iio and other smaller driver subsystems
for 6.17-rc1. It's a big set this time around, with the huge majority
being in the iio subsystem with new drivers and dts files being added
there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeYDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3dwCdF6xoEVZaDkLM5IF3XKWWgdYxjNsAoKUy2kUx
YtmVh4S0tMmugfeRGac7
=3Wxi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
|
||
|
Tristram Ha
|
84c47bfc5b |
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
KSZ8463 switch is a 3-port switch based from KSZ8863. Its major difference from other KSZ SPI switches is its register access is not a simple continual 8-bit transfer with automatic address increase but uses a byte-enable mechanism specifying 8-bit, 16-bit, or 32-bit access. Its registers are also defined in 16-bit format because it shares a design with a MAC controller using 16-bit access. As a result some common register accesses need to be re-arranged. This patch adds the basic structure for using KSZ8463. It cannot use the same regmap table for other KSZ switches as it interprets the 16-bit value as little-endian and its SPI commands are different. KSZ8463 uses a byte-enable mechanism to specify 8-bit, 16-bit, and 32-bit access. The register is first shifted right by 2 then left by 4. Extra 4 bits are added. If the access is 8-bit one of the 4 bits is set. If the access is 16-bit two of the 4 bits are set. If the access is 32-bit all 4 bits are set. The SPI command for read or write is then added. Because of this register transformation separate SPI read and write functions are provided for KSZ8463. KSZ8463's internal PHYs use standard PHY register definitions so there is no need to remap things. However, the hardware has a bug that the high word and low word of the PHY id are swapped. In addition the port registers are arranged differently so KSZ8463 has its own mapping for port registers and PHY registers. Therefore the PORT_CTRL_ADDR macro is replaced with the get_port_addr helper function. Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250725001753.6330-3-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Florin Leotescu
|
7114b74d99 |
hwmon: (emc2305) Add support for PWM frequency, polarity and output
Add three new attributes to the driver data structures to support configuration of PWM frequency, PWM polarity and PWM output config. Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com> Link: https://lore.kernel.org/r/20250603113125.3175103-2-florin.leotescu@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
||
|
Mario Limonciello
|
b1c26e0595
|
Move FCH header to a location accessible by all archs
A new header fch.h was created to store registers used by different AMD drivers. This header was included by i2c-piix4 in commit |
||
|
Gwendal Grignou
|
c430955d0c |
iio: cros_ec_sensors: add cros_ec_activity driver
ChromeOS EC can report activity information derived from the accelerometer: - Reports on-body/off-body as a proximity event. - Reports significant motion as an activity event. This new sensor is a virtual sensor, included only when the EC firmware is compiled with the appropriate module. Signed-off-by: Gwendal Grignou <gwendal@google.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://patch.msgid.link/20250604053903.1376465-1-gwendal@google.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Thomas Zimmermann
|
9bf9f98d00 |
fbdev/pxafb: Unexport symbol
Fix the compile-time warning
drivers/video/fbdev/pxafb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
The affected symbol is not used anywhere, so remove the function
entirely.
v2:
- remove unused functions (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes:
|
||
|
Ilpo Järvinen
|
593ee93aa7
|
Merge branch 'fixes' into for-next
Resolve conflicts in dell/alienware-wmi-wmax and asus-wmi, and enable applying a few amd/hsmp patches that depend on changes in the fixes branch. |
||
|
Hans de Goede
|
45adb05473
|
platform/x86: int3472: Remove unused sensor_config struct member
sensor_config is not used anywhere and its struct int3472_sensor_config type also is not declared anywhere, drop it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20250507184737.154747-5-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
Hans de Goede
|
1cfa1bb9b4
|
platform/x86: int3472: Export int3472_discrete_parse_crs()
At the moment the atomisp has duplicate code for parsing Intel camera sensor GPIOS and calling the special 79234640-9e10-4fea-a5c1-b5aa8b19756f _DSM to get the GPIO type and map it to the sensor. Export int3472_discrete_parse_crs() so that the atomisp driver can reuse the INT3472 code for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20250507184737.154747-4-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
Hans de Goede
|
1e5d088a52
|
platform/x86: int3472: Stop using devm_gpiod_get()
The intent is to re-use the INT3472 code for parsing Intel camera sensor GPIOs and mapping them to the sensor for the atomisp driver, which currently has duplicate code. On atomisp devices there is no special INT3472 ACPI device, instead the Intel _DSM to get the GPIO type is part of the ACPI device for the sensor itself. To deal with this the mapping is done from ipu_bridge_init() instead of from a platform-device probe() function, there is no device to tie the lifetime of the gpiod_get() calls done by the INT3472 code to. Switch from devm_gpiod_get() to plain gpiod_get() + explicit gpiod_put() calls, to prepare for the code being re-used in the atomisp driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20250507184737.154747-3-hdegoede@redhat.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
Hans de Goede
|
53eddae9af
|
platform/x86: int3472: Move common.h to public includes, symbols to INTEL_INT3472
Move the common.h header file to include/linux/platform_data/x86/int3472.h and add a "INTEL_INT3472" kernel-symbol-namespace to the exported symbols. This is a preparation patch for exporting some more symbols for re-use in the atomisp driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20250507184737.154747-2-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
Luke D. Jones
|
feea7bd6b0
|
platform/x86: asus-wmi: Refactor Ally suspend/resume
Adjust how the CSEE direct call hack is used. The results of months of testing combined with help from ASUS to determine the actual cause of suspend issues has resulted in this refactoring which immensely improves the reliability for devices which do not have the following minimum MCU FW version: - ROG Ally X: 313 - ROG Ally 1: 319 For MCU FW versions that match the minimum or above the CSEE hack is disabled and mcu_powersave set to on by default as there are no negatives beyond a slightly slower device reinitialization due to the MCU being powered off. As this is set only at module load time, it is still possible for mcu_powersave sysfs attributes to change it at runtime if so desired. Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250323023421.78012-3-luke@ljones.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
Vadim Pasternak
|
981527828c
|
platform/mellanox: Rename field to improve code readability
Rename field 'counter' in 'mlxreg_core_hotplug_platform_data' to count. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20250412091843.33943-2-vadimp@nvidia.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
David E. Box
|
d8455a63f7
|
platform/x86: intel_pmc_ipc: add option to build without ACPI
Introduce a configuration option that allows users to build the intel_pmc_ipc driver without ACPI support. This is useful for systems where ACPI is not available or desired. Based on the discussion from the patch [1], it was necessary to provide this option to accommodate specific use cases. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20250227121522.1802832-6-yong.liang.choong@linux.intel.com/#26280764 [1] Signed-off-by: David E. Box <david.e.box@linux.intel.com> Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20250313085526.1439092-1-yong.liang.choong@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
Linus Torvalds
|
a1b5bd45d4 |
USB/Thunderbolt update for 6.15-rc1
Here is the big set of USB and Thunderbolt driver updates for 6.15-rc1.
Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+2Zaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynIgQCaAyMozdrZtTiOs1OcZEuTkoCtKrEAniqe0OiL
s7R6j2NoOIwo9d6hBsjh
=IH7I
-----END PGP SIGNATURE-----
Merge tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
|
||
|
Linus Torvalds
|
29d9983b2c |
Pin control changes for the v6.15 kernel cycle:
Core changes:
- None really.
New drivers:
- AMD ISP411 "AMD ISP" driver.
- Exynos 2200 and 7870 SoC subdrivers.
- Sophgo RISC-V SG2042 and SG2044 subdrivers.
- Amlogic A4 subdriver.
- Rockchip RK3528 subdriver.
- Broadcom BCM21664 subdriver.
- Allwinner A523/T527 subdriver.
- Ingenic X1600 subdriver.
- Microchip SAMA7D65 subdriver, essentially a re-branded
Atmel AT91 PIO4 driver, but nowadays a Microschip SoC line.
Improvements:
- Bring in the devm_kmemdup_array() helper and use it throughout,
also bring in changes to other subsystems for this to establish
this helper.
- Support EGPIO on the Qualcomm SA8775P SoC.
- Extend EINT support in the Mediatek driver.
-----BEGIN PGP SIGNATURE-----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=iPMS
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- None really.
New drivers:
- AMD ISP411 "AMD ISP" driver
- Exynos 2200 and 7870 SoC subdrivers
- Sophgo RISC-V SG2042 and SG2044 subdrivers
- Amlogic A4 subdriver
- Rockchip RK3528 subdriver
- Broadcom BCM21664 subdriver
- Allwinner A523/T527 subdriver
- Ingenic X1600 subdriver
- Microchip SAMA7D65 subdriver, essentially a re-branded Atmel AT91
PIO4 driver, but nowadays a Microschip SoC line
Improvements:
- Bring in the devm_kmemdup_array() helper and use it throughout,
also bring in changes to other subsystems for this to establish
this helper
- Support EGPIO on the Qualcomm SA8775P SoC
- Extend EINT support in the Mediatek driver"
* tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (101 commits)
pinctrl: mediatek: Add EINT support for multiple addresses
pinctrl: amlogic-a4: Drop surplus semicolon
pinctrl: nuvoton: Reduce use of OF-specific APIs
pinctrl: nuvoton: Convert to use struct group_desc
pinctrl: nuvoton: Make use of struct pinfunction and PINCTRL_PINFUNCTION()
pinctrl: nuvoton: Convert to use struct pingroup and PINCTRL_PINGROUP()
pinctrl: npcm8xx: Fix incorrect struct npcm8xx_pincfg assignment
pinctrl: tegra: Fix off by one in tegra_pinctrl_get_group()
pinctrl: PINCTRL_AMDISP should depend on DRM_AMD_ISP
pinctrl: qcom: sa8775p: Enable egpio function
dt-bindings: pinctrl: qcom: Add egpio function for sa8775p
pinctrl: qcom: tlmm-test: Validate irq_enable delivers edge irqs
pinctrl: qcom: Clear latched interrupt status when changing IRQ type
dt-bindings: pinctrl: airoha: Add missing gpio-ranges property
pinctrl: bcm281xx: Add missing assignment in bcm21664_pinctrl_lock_all()
pinctrl: amd: isp411: Fix IS_ERR() vs NULL check in probe()
dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
pinctrl: tegra: Set SFIO mode to Mux Register
pinctrl-tegra: Restore SFSEL bit when freeing pins
pinctrl: tegra: Add descriptions for SoC data fields
...
|
||
|
Linus Torvalds
|
1a9239bb42 |
Networking changes for 6.15.
Core & protocols
----------------
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls).
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked)
in BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream performance
up to 2x.
- Improve performance of contended connect() by 200% by searching
for an available 4-tuple under RCU rather than a spin lock.
Bring an additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles.
There are up to 4 namespace roles but we used to have just 2 netns
pointer arguments, interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout
in TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar
to normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name
to messages as metadata
Driver API
----------
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where possible.
Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers
--------------
- Remove the IBM LCS driver for s390.
- Remove the sb1000 cable modem driver.
- Add support for SFP module access over SMBus.
- Add MCTP transport driver for MCTP-over-USB.
- Enable XDP metadata support in multiple drivers.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96% with
1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XY0S
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
||
|
David E. Box
|
7e2f7e25f6 |
arch: x86: add IPC mailbox accessor function and add SoC register access
- Exports intel_pmc_ipc() for host access to the PMC IPC mailbox - Enables the host to access specific SoC registers through the PMC firmware using IPC commands. This access method is necessary for registers that are not available through direct Memory-Mapped I/O (MMIO), which is used for other accessible parts of the PMC. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Chao Qin <chao.qin@intel.com> Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20250227121522.1802832-4-yong.liang.choong@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Pengyu Luo
|
7636f090d0
|
platform: arm64: add Huawei Matebook E Go EC driver
There are three variants of which Huawei released the first two simultaneously. Huawei Matebook E Go LTE(sc8180x), codename seems to be gaokun2. Huawei Matebook E Go(sc8280xp@3.0GHz), codename must be gaokun3. (see [1]) Huawei Matebook E Go 2023(sc8280xp@2.69GHz), codename should be also gaokun3. Adding support for the latter two variants for now, this driver should also work for the sc8180x variant according to acpi table files, but I don't have the device to test yet. Different from other Qualcomm Snapdragon sc8280xp based machines, the Huawei Matebook E Go uses an embedded controller while others use a system called PMIC GLink. This embedded controller can be used to perform a set of various functions, including, but not limited to: - Battery and charger monitoring; - Charge control and smart charge; - Fn_lock settings; - Tablet lid status; - Temperature sensors; - USB Type-C notifications (ports orientation, DP alt mode HPD); - USB Type-C PD (according to observation, up to 48w). Add a driver for the EC which creates devices for UCSI and power supply devices. This driver is inspired by the following drivers: drivers/platform/arm64/acer-aspire1-ec.c drivers/platform/arm64/lenovo-yoga-c630.c drivers/platform/x86/huawei-wmi.c Also thanks for reviewers' working. They have made this patch improve a lot. [1] https://bugzilla.kernel.org/show_bug.cgi?id=219645 Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20250214180656.28599-3-mitltlatltl@gmail.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
Jameson Thies
|
dcba69711f |
platform/chrome: add PD_EVENT_INIT bit definition
Update cros_ec_commands.h to include a definition for PD_EVENT_INIT. On platforms supporting UCSI, this host event type is sent when the PPM initializes. Signed-off-by: Jameson Thies <jthies@google.com> Reviewed-by: Benson Leung <bleung@chromium.org> Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Łukasz Bartosik <ukaszb@chromium.org> Link: https://lore.kernel.org/r/20250204024600.4138776-2-jthies@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Andy Shevchenko
|
6edf3152bd |
pwm: lpss: Clarify the bypass member semantics in struct pwm_lpss_boardinfo
Instead of an odd comment, cite the documentation, which says more clearly what's going on with the programming flow on some of the Intel SoCs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
||
|
Linus Torvalds
|
cc8b10fa70 |
USB / Thunderbolt driver updates for 6.14-rc1
Here is the USB and Thunderbolt driver updates for 6.14-rc1. Nothing
huge in here, just lots of new hardware support and updates for existing
drivers. Changes here are:
- big gadget f_tcm driver update
- other gadget driver updates and fixes
- thunderbolt driver updates for new hardware and capabilities and
lots more debugging functionality to handle it when things aren't
working well.
- xhci driver updates
- new USB-serial device updates
- typec driver updates, including a chrome platform driver (acked by
the subsystem maintainers)
- other small driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5fI8A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yloPwCguHSvL8FM6Xwaxc/hdfalwI4c49AAnRECaMhR
mA1owvXgrKO3hjDHo2Sg
=Z5yt
-----END PGP SIGNATURE-----
Merge tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the USB and Thunderbolt driver updates for 6.14-rc1. Nothing
huge in here, just lots of new hardware support and updates for
existing drivers. Changes here are:
- big gadget f_tcm driver update
- other gadget driver updates and fixes
- thunderbolt driver updates for new hardware and capabilities and
lots more debugging functionality to handle it when things aren't
working well.
- xhci driver updates
- new USB-serial device updates
- typec driver updates, including a chrome platform driver (acked by
the subsystem maintainers)
- other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: hcd: Bump local buffer size in rh_string()
Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null"
usb: typec: tcpci: Prevent Sink disconnection before vPpsShutdown in SPR PPS
usb: xhci: tegra: Fix OF boolean read warning
usb: host: xhci-plat: add support compatible ID PNP0D15
usb: typec: ucsi: Add a macro definition for UCSI v1.0
usb: dwc3: core: Defer the probe until USB power supply ready
usbip: Correct format specifier for seqnum from %d to %u
usbip: Fix seqnum sign extension issue in vhci_tx_urb
dt-bindings: usb: snps,dwc3: Split core description
usb: quirks: Add NO_LPM quirk for TOSHIBA TransMemory-Mx device
usb: dwc3: gadget: Reinitiate stream for all host NoStream behavior
USB: Use str_enable_disable-like helpers
USB: gadget: Use str_enable_disable-like helpers
USB: phy: Use str_enable_disable-like helpers
USB: typec: Use str_enable_disable-like helpers
USB: host: Use str_enable_disable-like helpers
USB: Replace own str_plural with common one
USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()
usb: phy: Remove API devm_usb_put_phy()
...
|
||
|
Linus Torvalds
|
88e969fc18 |
Input updates for v6.14-rc0
- more conversions to the guard notation in the input core - a fix for NXP BBNSM power key driver to clean up wake IRQ after unbinding - several new vendor/device ID pairs added to xpad game controller driver - several drivers switched to using str_enable_disable and similar helpers instead of open-coding - add mapping for F23 to atkbd driver so that MS "Copilot" key shortcut works out of the box (if userspace is ready to handle it) - evbug input handler has been removed (debugging through evdev is strongly preferred to dumping all events into the kernel log). -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ5ABwgAKCRBAj56VGEWX nColAQDdu5HPbyeF6ZU6/BqTO1ZhBbcSnaXyDRT0jv0qp0UlQAEA+zc0EPBtx8jE RumALncq1FZkjHpPDUUmlIrTdiFM4gA= =whWY -----END PGP SIGNATURE----- Merge tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - more conversions to the guard notation in the input core - a fix for NXP BBNSM power key driver to clean up wake IRQ after unbinding - several new vendor/device ID pairs added to xpad game controller driver - several drivers switched to using str_enable_disable and similar helpers instead of open-coding - add mapping for F23 to atkbd driver so that MS "Copilot" key shortcut works out of the box (if userspace is ready to handle it) - evbug input handler has been removed (debugging through evdev is strongly preferred to dumping all events into the kernel log). * tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits) Input: synaptics - fix crash when enabling pass-through port Input: atkbd - map F23 key to support default copilot shortcut Input: xpad - add support for Nacon Evol-X Xbox One Controller Input: xpad - add unofficial Xbox 360 wireless receiver clone Input: xpad - add support for wooting two he (arm) Input: xpad - improve name of 8BitDo controller 2dc8:3106 Input: xpad - add QH Electronics VID/PID Input: joystick - use str_off_on() helper in sw_connect() Input: Use str_enable_disable-like helpers Input: use guard notation in input core Input: poller - convert locking to guard notation Input: mt - make use of __free() cleanup facility Input: mt - convert locking to guard notation Input: ff-memless - make use of __free() cleanup facility Input: ff-memless - convert locking to guard notation Input: ff-core - make use of __free() cleanup facility Input: ff-core - convert locking to guard notation Input: remove evbug driver Input: mma8450 - add chip ID check in probe Input: bbnsm_pwrkey - add remove hook ... |
||
|
Linus Torvalds
|
27c0278477 |
hid-for-linus-2025012001
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEL65usyKPHcrRDEicpmLzj2vtYEkFAmeOFTYACgkQpmLzj2vt YEkzxw//TysEhHRBl7Fff+pTDSCag7xuJHso+U/y2iqXCJM/zpX8vp4EOV6A0Fwa 2UbhaR5IASHjytAE7rwStlaOScgG04mmgB9Rj+OXbjM+2M/VDQbeM/CRrZb7LJDZ rFgz0W84M3tCRxkqtEID42Q+1n7K3Fxv/DJYSPofMuT6t9H8qEb+n8mgVOXp/B1U nAEoLmxBvDPqiWxpfIHcVZ3fDZglp74906LcayfVbOAt7Q0xZkGfj7Etw5uWx/yE H60GgFpDGQj56OGDEB/pyQFEEeIIJfvq77wCPPk0RmITbBkTW6KPV6SJorW4pgQU ruQXQSaToxePm9TvmumJ08vfLYNpaMJ5TUkWk74ccFe/9aNpSdvO5miHIcIhbE8B ooV0ojqU/TyTYE/UbEnsoxvlZUhX8v3zzfmPw+rUcZTn4imHTVkHuw/4iDWX+ZxP 2v8n1Wwle+ofBuy5PS32MUHDwDnEQRulWSrOHDFmRXoISM7/RGKLARGUqcOwsRmF 0sZSyCrXU3GSfNF8sVMv5SYKEW+feqKLanL7Hna7LnUaw4DRarWRqXmHXc5sfcY/ PP1hpdA/iJ44su1M07dBaVkM1bqn5u7BngOgvTCQVo0Nr4NftyBzkjGz715DFIrz w2eYvZpaPXyGsRb+JiTRVaa9PI/P1E7heZrQTCnc8zqUCZMVVlM= =WYkk -----END PGP SIGNATURE----- Merge tag 'hid-for-linus-2025012001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - newly added support for Intel Touch Host Controller (Even Xu, Xinpeng Sun) - hid-core fix for long-standing syzbot-reported cornercase of Resolution Multiplier not being present in any of the Logical Collections in the device HID report descriptor (Alan Stern) - improvement of behavior for non-standard LED brightness values for Wacom driver (Jason Gerecke) - PCI Wacom device support (depends on Intel THC support) (Even Xu) - SteelSeries Arctis 9 support (Christian Mayer) - constification of 'struct bin_attribute' in various HID driver (Thomas Weißschuh) - other assorted code cleanups / fixes and device ID additions * tag 'hid-for-linus-2025012001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (63 commits) HID: hid-asus: Disable OOBE mode on the ProArt P16 HID: steelseries: remove unnecessary return HID: steelseries: export model and manufacturer HID: steelseries: export charging state for the SteelSeries Arctis 9 headset HID: steelseries: add SteelSeries Arctis 9 support HID: steelseries: preparation for adding SteelSeries Arctis 9 support HID: intel-thc-hid: fix build errors in um mode HID: intel-thc-hid: intel-quicki2c: fix potential memory corruption HID: intel-thc-hid: intel-thc: Fix error code in thc_i2c_subip_init() HID: lenovo: Fix undefined platform_profile_cycle in ThinkPad X12 keyboard patch HID: uclogic: make const read-only array touch_ring_model_params_buf static HID: hid-steam: Make sure rumble work is canceled on removal HID: Wacom: Add PCI Wacom device support HID: intel-thc-hid: intel-quicki2c: Add PM implementation HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driver HID: intel-thc-hid: intel-quicki2c: Add HIDI2C protocol implementation HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C ACPI interfaces HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver hid layer HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver skeleton HID: intel-thc-hid: intel-quickspi: Add PM implementation ... |
||
|
Linus Torvalds
|
641b0c64b8 |
A pretty quiet cycle this time around. We have a bunch of new Qualcomm clk
drivers, per usual, and then a handful of drivers for other SoCs. Then the
usual pile of cleanups is fairly small data fixes or converting DT bindings to
YAML so they can be validated. No changes to the core framework besides an OF
node refcount bump that never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750 global,
tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh and MSM8937 and
MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver
-----BEGIN PGP SIGNATURE-----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=wK9g
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"A pretty quiet cycle this time around. We have a bunch of new Qualcomm
clk drivers, per usual, and then a handful of drivers for other SoCs.
Then the usual pile of cleanups is fairly small data fixes or
converting DT bindings to YAML so they can be validated.
No changes to the core framework besides an OF node refcount bump that
never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750
global, tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh
and MSM8937 and MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (159 commits)
clk: analogbits: Fix incorrect calculation of vco rate delta
clk: bcm: rpi: Add disp clock
clk: bcm: rpi: Create helper to retrieve private data
clk: bcm: rpi: Enable minimize for all firmware clocks
clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
clk: bcm: rpi: Add ISP to exported clocks
clk: stm32f4: support spread spectrum clock generation
clk: stm32f4: use FIELD helpers to access the PLLCFGR fields
dt-bindings: clock: st,stm32-rcc: support spread spectrum clocking
dt-bindings: clock: convert stm32 rcc bindings to json-schema
clk: Use str_enable_disable-like helpers
clk: clk-loongson2: Fix the number count of clk provider
clk: clk-loongson2: Switch to use devm_clk_hw_register_fixed_rate_parent_data()
clk: starfive: Make _clk_get become a common helper function
clk: en7523: Add clock for eMMC for EN7581
dt-bindings: clock: add ID for eMMC for EN7581
dt-bindings: clock: drop NUM_CLOCKS define for EN7581
clk: en7523: Rework clock handling for different clock numbers
clk: thead: Fix cpu2vp_clk for TH1520 AP_SUBSYS clocks
clk: thead: Add CLK_IGNORE_UNUSED to fix TH1520 boot
...
|
||
|
Linus Torvalds
|
abdebb2837 |
i2c-for-6.14-rc1
Core:
- list-based mechanisms for handling auto-detected and userspace created
clients are replaced with a flag-based approach. The resulting code is
much simpler as well as the locking.
- i2c clients now get a default debugfs dir managed by the I2C core.
Drivers don't have to maintain their own directory anymore.
Drivers:
- xiic gains atomic_transfer support
- imx-lpi2c gains DMA and target mode support
- riic gets a collection of cleanups
- npcm gets a better timeout handling and more precise frequency setups
- davinci loses the unused platform_data
The rest is regular driver updates and improvements.
AT24:
- add new compatibles for at24 variants from Giantec and Puya
Semiconductor (together with a new vendor prefix)
-----BEGIN PGP SIGNATURE-----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=yEZX
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core:
- list-based mechanisms for handling auto-detected and userspace
created clients are replaced with a flag-based approach. The
resulting code is much simpler as well as the locking.
- i2c clients now get a default debugfs dir managed by the I2C core.
Drivers don't have to maintain their own directory anymore.
Driver updates:
- xiic: atomic_transfer support
- imx-lpi2c: DMA and target mode support
- riic cleanups
- npcm: better timeout handling and more precise frequency setups
- davinci: remove unused platform_data
- at24: add new compatibles for variants from Giantec and Puya
Semiconductor (together with a new vendor prefix)"
* tag 'i2c-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: add kdoc for the new debugfs entry of clients
i2c: designware: Actually make use of the I2C_DW_COMMON and I2C_DW symbol namespaces
i2c: add core-managed per-client directory in debugfs
i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz
i2c: riic: Add `riic_bus_barrier()` to check bus availability
i2c: riic: Use predefined macro and simplify clock tick calculation
i2c: riic: Mark riic_irqs array as const
i2c: riic: Make use of devres helper to request deasserted reset line
i2c: riic: Use GENMASK() macro for bitmask definitions
i2c: riic: Use BIT macro consistently
i2c: riic: Use local `dev` pointer in `dev_err_probe()`
i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
i2c: riic: Introduce a separate variable for IRQ
i2c: amd756: Remove superfluous TODO
Revert "i2c: amd756: Fix endianness handling for word data"
i2c: i801: Add lis3lv02d for Dell Precision M6800
i2c: i801: Remove unnecessary PCI function call
i2c: core: Allocate temp client on the stack in i2c_detect
i2c: slave-eeprom: Constify 'struct bin_attribute'
i2c: imx-lpi2c: make controller available until the system enters suspend_noirq() and from resume_noirq().
...
|
||
|
Linus Torvalds
|
909fd2b89f |
- Fix race in device_node_get_regmap() using more extensive locking.
- Remove unused platform driver support for syscon.
- Allow syscon nodes to be registered without a "syscon" compatible string.
- Make `platform_data` pointer const in struct mfd_cell.
- Revert support for multiple AXP PMICs to avoid regressions.
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO operation.
- Store the result from fault_log() for use by other sub-components.
- Fix an invalid regmap-config max_register value.
- Add another Gemini Lake ISA bridge PCI device ID.
- Use devm_register_power_off_handler() to simplify code.
- Add support for QNAP microcontroller units, including LEDs, input, and hwmon.
- Use MFD_CELL macros and remove unused code.
- Add support for AAEON UP board FPGA.
- Remove unused includes.
- Fix various typos and compatibility issues in multiple bindings.
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424.
- Convert several bindings to YAML schema.
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings directly.
- Fix rohm,bd71815 bindings by correcting resistor values and typos.
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon.
- Adjust the file entry for the qnap-mcu header in MAINTAINERS.
-----BEGIN PGP SIGNATURE-----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=3HQm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
- Fix race in device_node_get_regmap() using more extensive locking
- Remove unused platform driver support for syscon
- Allow syscon nodes to be registered without a "syscon" compatible
string
- Make `platform_data` pointer const in struct mfd_cell
- Revert support for multiple AXP PMICs to avoid regressions
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
operation
- Store the result from fault_log() for use by other sub-components
- Fix an invalid regmap-config max_register value
- Add another Gemini Lake ISA bridge PCI device ID
- Use devm_register_power_off_handler() to simplify code
- Add support for QNAP microcontroller units, including LEDs, input,
and hwmon
- Use MFD_CELL macros and remove unused code
- Add support for AAEON UP board FPGA
- Remove unused includes
- Fix various typos and compatibility issues in multiple bindings
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424
- Convert several bindings to YAML schema
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
directly
- Fix rohm,bd71815 bindings by correcting resistor values and typos
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon
- Adjust the file entry for the qnap-mcu header in MAINTAINERS
* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
MAINTAINERS: Adjust the file entry for the qnap-mcu header
dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
Revert "mfd: axp20x: Allow multiple regulators"
dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
mfd: syscon: Allow syscon nodes without a "syscon" compatible
mfd: syscon: Remove the platform driver support
mfd: syscon: Fix race in device_node_get_regmap()
dt-bindings: mfd: atmel: Convert to YAML schema
dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
mfd: tps65219: Remove unused macros & add regmap.h
mfd: tps65219: Use MFD_CELL macros
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
mfd: Add support for AAEON UP board FPGA
mfd: da9052: Store result from fault_log
mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
mfd: cs42l43: Use devres for remove as well
...
|
||
|
Jiri Kosina
|
670af65d2a |
Merge branch 'for-6.14/constify-bin-attribute' into for-linus
- constification of 'struct bin_attribute' in various HID driver (Thomas Weißschuh) |
||
|
Luke D. Jones
|
53078a736f |
HID: hid-asus: Disable OOBE mode on the ProArt P16
The new ASUS ProArt 16" laptop series come with their keyboards stuck in an Out-Of-Box-Experience mode. While in this mode most functions will not work such as LED control or Fn key combos. The correct init sequence is now done to disable this OOBE. This patch addresses only the ProArt series so far and it is unknown if there may be others, in which case a new quirk may be required. Signed-off-by: Luke D. Jones <luke@ljones.dev> Co-developed-by: Connor Belli <connorbelli2003@gmail.com> Signed-off-by: Connor Belli <connorbelli2003@gmail.com> Tested-by: Jan Schmidt <jan@centricular.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Greg Kroah-Hartman
|
2919c4a3d8 |
Merge 6.13-rc7 into usb-next
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Rob Herring (Arm)
|
26769582bf |
mfd: syscon: Remove the platform driver support
The platform driver is dead code. It is not used by DT platforms since
commit
|
||
|
Bartosz Golaszewski
|
b04ce63859 |
i2c: davinci: kill platform data
There are no more board file users of this driver. The platform data structure is only used internally. Two of the four fields it stores are not used at all anymore. Pull the remainder into the driver data struct and shrink code by removing parts that are now dead code. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20241211102337.37956-1-brgl@bgdev.pl Signed-off-by: Andi Shyti <andi.shyti@kernel.org> |
||
|
Pavan Holla
|
401d07d530 |
platform/chrome: Update ChromeOS EC header for UCSI
Add EC host commands for reading and writing UCSI structures in the EC. The corresponding kernel driver is cros-ec-ucsi. Also update PD events supported by the EC. Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Pavan Holla <pholla@chromium.org> Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org> Link: https://lore.kernel.org/r/20241231131047.1757434-2-ukaszb@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Rob Barnes
|
fb1e493426 |
platform/chrome: cros_ec_lpc: Only check for events on MKBP notifies
Only check EC for MKBP events when the ACPI notify value indicates the notify is due to an MKBP host event. This reduces unnecessary queries to the EC. Notify value 0x80 is reserved for devices specific notifies. It is used by many devices to indicate various events. It's only used by cros_ec for MKBP events. Signed-off-by: Rob Barnes <robbarnes@google.com> Link: https://lore.kernel.org/r/20241218015759.3558830-1-robbarnes@google.com Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> |
||
|
Dawid Niedzwiecki
|
5ffa0dbfdc |
platform/chrome: cros_ec: jump to RW before probing
There are EC devices, like FPMCU, that use RWSIG as a method of authenticating RW section. After the authentication succeeds, EC device waits some time before jumping to RW. EC can be probed before the jump, which means there is a time window after jump to RW in which EC won't respond, because it is not initialized. It can cause a communication errors after probing. To avoid such problems, send the RWSIG continue command first, which skips waiting for the jump to RW. Send the command more times, to make sure EC is ready in RW before the start of the actual probing process. If a EC device doesn't support the RWSIG, it will respond with invalid command error code and probing will continue as usual. Signed-off-by: Dawid Niedzwiecki <dawidn@google.com> Link: https://lore.kernel.org/r/20241206091514.2538350-2-dawidn@google.com Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> |
||
|
Bartosz Golaszewski
|
7c4b497fd4 |
clk: davinci: remove platform data struct
There are no board files using struct davinci_pll_platform_data anymore. The structure itself is currently used to store a single pointer. Let's remove the struct definition, the header and rework the driver to not require the syscon regmap to be stored in probe(). Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20241217174154.84441-1-brgl@bgdev.pl Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Dmitry Torokhov
|
6d4a0f4ea7 |
Linux 6.13-rc3
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmdfbR8eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGOOIH/j788VAvWIM+0RdL PcKlFdfTucdHHS4P19WT9FvK3CQw025xyliY0YFyXreCXwIu/lGGC6OW+tV7aC8c EWJPqP+kJuLStfm3vpXbEnPql1K1IOW8CfeKhLgbPW2K+BFSX1BFbm9lJ6DQo3JS GMvgn9NE7ssJ6o4Do6mICHkcOxGq39fFYxhdlB/QVro3dPWfYffDivlGhycePBle ZXWWebLlEA9pMd7xw4LJImb1huhxt1rdBzQtmInpIGP2J6CDJ4nXJdiLib/TprWO Wg1HRDrIIegMEm/xC6M0D9RmH3NGJ5AB54qnzG6nXDEPMurcBkTR6EcnQitYmp9c 7O1z9JI= =Go2H -----END PGP SIGNATURE----- Merge tag 'v6.13-rc3' into next Sync up with the mainline. |
||
|
Bartosz Golaszewski
|
828fd3f1d6 |
Input: davinci-keyscan - remove leftover header
The corresponding driver was removed two years ago but the platform data
header was left behind. Remove it now.
Fixes:
|
||
|
Lizhi Hou
|
dcbef0798e |
dmaengine: amd: qdma: Remove using the private get and set dma_ops APIs
The get_dma_ops and set_dma_ops APIs were never for driver to use. Remove
these calls from QDMA driver. Instead, pass the DMA device pointer from the
qdma_platdata structure.
Fixes:
|
||
|
Linus Torvalds
|
d8b78066f4 |
TTY / Serial driver updates for 6.13-rc1
Here is a small set of tty and serial driver updates for 6.13-rc1. Nothing major at all this time, only some small changes: - few device tree binding updates - 8250_exar serial driver updates - imx serial driver updates - sprd_serial driver updates - other tiny serial driver updates, full details in the shortlog All of these have been in linux-next for a while with one reported issue, but that commit has now been reverted. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0s3DA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykmgQCeIDU0GHWFuzEiZNmsO5bLN8AcoFQAn1rlOaHu 9lOOf7xVSCUBU0GgynI5 =SEtJ -----END PGP SIGNATURE----- Merge tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is a small set of tty and serial driver updates for 6.13-rc1. Nothing major at all this time, only some small changes: - few device tree binding updates - 8250_exar serial driver updates - imx serial driver updates - sprd_serial driver updates - other tiny serial driver updates, full details in the shortlog All of these have been in linux-next for a while with one reported issue, but that commit has now been reverted" * tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits) Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" serial: amba-pl011: fix build regression dt-bindings: serial: Add a new compatible string for ums9632 serial: sprd: Add support for sc9632 tty/serial/altera_uart: unwrap error log string tty/serial/altera_jtaguart: unwrap error log string serial: amba-pl011: Fix RX stall when DMA is used tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler serial: 8250_fintek: Add support for F81216E serial: sh-sci: Clean sci_ports[0] after at earlycon exit tty: atmel_serial: Fix typo retreives to retrieves tty: atmel_serial: Use devm_platform_ioremap_resource() serial: 8250: omap: Move pm_runtime_get_sync tty: serial: samsung: Add Exynos8895 compatible dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible serial: 8250_dw: Add Sophgo SG2044 quirk dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry. altera_jtaguart: Use dev_err() to report error attaching IRQ altera_uart: Use dev_err() to report error attaching IRQ handler ... |
||
|
Linus Torvalds
|
80739fd00c |
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance consistency and fix race conditions. - The syscon driver now utilizes the regmap max_register_is_0 capability for consistent register map configuration across syscons of all sizes. - New device support has been added for QCS8300, qcs615, SA8255p, and samsung,s2dos05, expanding the range of compatible hardware. - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs and avoids loading the charger with UCSI, streamlining functionality. - The bd96801 driver now utilizes the more modern maple tree register cache, improving performance. - The da9052-spi driver has undergone a fix to change the read-mask to write-mask, preventing potential issues. - Unused declarations in max77693 have been removed, and support for samsung,s2dos05 has been added, enhancing code clarity and device compatibility. - Error handling in cs42l43 has been fixed to avoid unbalanced regulator put and ensure proper synchronization during driver removal. - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(), improving code consistency. - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated and reorganized for better clarity and maintainability. - The intel_soc_pmic_bxtwc driver has undergone significant improvements, including the use of IRQ domains for various devices, fixing IRQ domain names duplication, and code refactoring for better consistency and maintainability. - The ipaq-micro driver has received a fix for a missing break statement in the default case, enhancing code robustness. - Support for the AXP323 PMIC has been added to the axp20x driver, along with ensuring a clear relationship between IDs and model names, and allowing multiple regulators, broadening hardware compatibility. - The cs42l43 driver now disables IRQs during suspend for improved power management. - The adp5585 driver has reduced its dependencies by dropping the obsolete dependency on COMPILE_TEST. - Initial support for the MT6328 PMIC has been added to the mt6397 driver, expanding the range of supported hardware. - The rtc-bd70528 driver has been simplified by dropping the IC name from IRQ, improving code readability. - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been updated to enhance clarity and incorporate new features. - The rt5033 driver has received a fix for a missing regmap_del_irq_chip() in the error handling path. - New device support has been added for MSM8917, and the intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client. - The 88pm886 driver has added support for the RTC cell, and the tqmx86 driver has improved its GPIO IRQ setup and added I2C IRQ support, increasing functionality. - The sprd,sc2731 DT schema has been updated and converted to YAML format for better readability and maintainability. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmc/KQQACgkQUa+KL4f8 d2E0Gg//blIYrtUgGy5xEwR8WIobYtAxBo+AMX1tSgh4Hs4u/SFhy4cE7no+M3J2 Id5gQJscuz3k4sH0raoUMp2NRFyI8lD8Y9xRBTDE+KV/FbdL1KHfmTun2NY1zG7U LIop39HsJkJ0Z06lnyBf61QK6SmlzT8vXbJmK4mYf8wgBX7iFDZ0FMZHP2uW5k/Z UV8nyQalwerG+jOGXfQkVDXF8YKToqPtqsFWTJ1Yn5gs1SCd6dyusDNYqUDuW4Ng dbu/4wt3mspliTOnBTPnXlcVsCNefhtbCWxyBpaA3luK9ciMdX7cZ8wei1xkFcwK 5bXPjXsFiiUbDX0l/6eS1h676k1JQl5iABlhGXHJm/GMcN9fdNFCQL/2rtJ4iSfW 0CoYjERfm6OyHF0Wiuk3I8x/AARWKXtDEjktGXUL0do7NBqJgB3ISme8x8b5hW4l HO6MmsFmHxHbIlb+kCTTCtXa5R1Sdca/8qrPxMb+B89X3eOtF7sjVgS9dwkLNCGp hqP0K2IGNaRw+EDlXCBaWrbq7x0kpup6o+nooViU0Pj9fFjEdZlCLyu22+kjl04V Lfe3x9wMXBrHVrPynoaQp6+57QlWfpM0uuKJWoaKlCoJTh8UbFcWWkDqr6I/pDur EtfSwOO8uVuS8m/FMAs0m/+zrWfHAvjAbAHFCKBu/vKaD5DvxeI= =YP3r -----END PGP SIGNATURE----- Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: - Several drivers, including atmel-flexcom/rk8xx-core, palmas, and tps65010, have undergone minor code improvements to enhance consistency and fix race conditions. - The syscon driver now utilizes the regmap max_register_is_0 capability for consistent register map configuration across syscons of all sizes. - New device support has been added for QCS8300, qcs615, SA8255p, and samsung,s2dos05, expanding the range of compatible hardware. - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs and avoids loading the charger with UCSI, streamlining functionality. - The bd96801 driver now utilizes the more modern maple tree register cache, improving performance. - The da9052-spi driver has undergone a fix to change the read-mask to write-mask, preventing potential issues. - Unused declarations in max77693 have been removed, and support for samsung,s2dos05 has been added, enhancing code clarity and device compatibility. - Error handling in cs42l43 has been fixed to avoid unbalanced regulator put and ensure proper synchronization during driver removal. - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(), improving code consistency. - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated and reorganized for better clarity and maintainability. - The intel_soc_pmic_bxtwc driver has undergone significant improvements, including the use of IRQ domains for various devices, fixing IRQ domain names duplication, and code refactoring for better consistency and maintainability. - The ipaq-micro driver has received a fix for a missing break statement in the default case, enhancing code robustness. - Support for the AXP323 PMIC has been added to the axp20x driver, along with ensuring a clear relationship between IDs and model names, and allowing multiple regulators, broadening hardware compatibility. - The cs42l43 driver now disables IRQs during suspend for improved power management. - The adp5585 driver has reduced its dependencies by dropping the obsolete dependency on COMPILE_TEST. - Initial support for the MT6328 PMIC has been added to the mt6397 driver, expanding the range of supported hardware. - The rtc-bd70528 driver has been simplified by dropping the IC name from IRQ, improving code readability. - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been updated to enhance clarity and incorporate new features. - The rt5033 driver has received a fix for a missing regmap_del_irq_chip() in the error handling path. - New device support has been added for MSM8917, and the intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client. - The 88pm886 driver has added support for the RTC cell, and the tqmx86 driver has improved its GPIO IRQ setup and added I2C IRQ support, increasing functionality. - The sprd,sc2731 DT schema has been updated and converted to YAML format for better readability and maintainability. * tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits) dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm dt-bindings: mfd: sprd,sc2731: Convert to YAML mfd: tqmx86: Add I2C IRQ support mfd: tqmx86: Make IRQ setup errors non-fatal mfd: tqmx86: Refactor GPIO IRQ setup mfd: tqmx86: Improve gpio_irq module parameter description mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S mfd: 88pm886: Add the RTC cell dt-bindings: mfd: Add Realtek RTL9300 switch peripherals mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client mfd: intel_soc_pmic_*: Consistently use filename as driver name dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917 mfd: rt5033: Fix missing regmap_del_irq_chip() mfd: cgbc-core: Fix error handling paths in cgbc_init_device() dt-bindings: mfd: aspeed: Support for AST2700 mfd: Switch back to struct platform_driver::remove() dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750 mfd: rtc: bd7xxxx Drop IC name from IRQ mfd: mt6397: Add initial support for MT6328 mfd: adp5585: Drop obsolete dependency on COMPILE_TEST ... |
||
|
Linus Torvalds
|
fcc79e1714 |
Networking changes for 6.13.
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
||
|
Linus Torvalds
|
43fb83c17b |
ARM: soc updates for 6.13
The SoC specific code updates for 6.13 are fairly minimal. One Broadcom SoC model gains automatic configuration for the debug uarg as we have on many other machines, the remaining changes are trivial cleanups. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+D8IACgkQYKtH/8kJ UicuyhAAqR3ps9ukDj4jIVrQthV76rMb6HfEF4gQ4qxIjS3uLp5wfqjxzeTI7bKY ntrzU9rAxgMdTuRDVqONCxjgBvtg7pG9kXlbndVhl11RdryEeO/fat99V2mPN6yS 0t9tR6lxVcz3VRI5qcyCRYLRicDXyeNklsMwEhfSolS1hWbTG0b/qtn8oa+vQ7bs U33rnvudrC36Wpy4HU6XIissq1RgleUrGqC6L2M3OLSEOlS8tM4RBA215VaDiWs9 fP8dYhdMVWmlif9pXi1L1M3uqEE3ahVDwzqg1bSc0LmX7nn4rXGGgu/YGiALuW4t KmsoTdcwaPxiQR+WVp3G6EEVxumFpMfX1dGiJ8ZagaI+pbXpjHej6B+xhWCRgjfp eTK0YeGjDduEOaaozGys5NdqoGFKPpl+npLD1rQGBtizCJO1x6zINAyuRgNHhyYa 640Bn77O7Rs+41qao2Nnr4mfbur73d3q+K1qOy4Tx3BL5fQGyz4PwUkT/wG4C++j esCBO2lA9opw9ZJzBSFWx6ez0GtEW+kVUf3dNDSXxYawVNBrIoV61xnG7Xcfqz0x RFSWTATWKLI34Px6fuorVxVw8xcGdQGgvbvIDbj2aiC8yXIbzeeSs8P9pEsakYD9 eej8H6eRy/EnOwBC8yJXCHoAA31PqaO+aLI5Vf0p0m0Ibtv/1zQ= =lQ3B -----END PGP SIGNATURE----- Merge tag 'soc-arm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "The SoC specific code updates for 6.13 are fairly minimal. One Broadcom SoC model gains automatic configuration for the debug uarg as we have on many other machines, the remaining changes are trivial cleanups" * tag 'soc-arm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx: Switch to new sys-off handler API ARM: bcm: brcmstb: Drop custom init_irq callback ARM: bcm: Support BCMBCA debug UART ARM: zynq: Remove unused zynq_slcr_init() declaration ASoC: samsung: Remove obsoleted declaration for s3c64xx_ac97_setup_gpio ARM: samsung: Remove obsoleted declaration for s3c_hwmon_set_platdata |
||
|
Linus Torvalds
|
fcb3ad4366 |
platform-drivers-x86 for v6.13-1
Highlights: - alienware-wmi: WMAX thermal interface support - amd/hsmp: Split ACPI and platform device based drivers - amd/x3d_vcache: X3D frequency/cache mode switching support - asus-wmi: Thermal policy fixes - intel/pmt: Disable C1 auto-demotion in suspend to allow entering the deepest C-states - intel-hid: Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 - intel_scu_ipc: Replace "workaround" with 32-bit IO - panasonic-laptop: Correct *_show() function error handling - p2sb: Gemini Lake P2SB devfn correction - think-lmi: Admin/System certificate authentication support - wmi: Disable WMI devices for shutdown, refactoring continues - x86-android-tablets: Vexia EDU ATLA 10 tablet support - platform/surface: Surface Pro 9 5G (Arm/QCOM) support - Miscellaneous cleanups / refactoring / improvements Expected conflicts: - hsmp driver split into two vs constifying bin_attribute [1] [1] https://lore.kernel.org/all/20241107212645.41252436@canb.auug.org.au/ The following is an automated shortlog grouped by driver: alienware-wmi: - added force module parameters - added platform profile support - Adds support to Alienware x17 R2 - alienware_wmax_command() is now input size agnostic - create_thermal_profile() no longer brute-forces IDs - extends the list of supported models - fixed indentation and clean up - Fix spelling mistake "requieres" -> "requires" - order alienware_quirks[] alphabetically - WMAX interface documentation amd: amd_3d_vcache: - Add AMD 3D V-Cache optimizer driver - Add sysfs ABI documentation amd/hsmp: - Add new error code and error logs - Change generic plat_dev name to hsmp_pdev - Change the error type - Convert amd_hsmp_rdwr() to a function pointer - Create hsmp/ directory - Create separate ACPI, plat and common drivers - Create wrapper function init_acpi() - Make hsmp_pdev static instead of global - mark hsmp_msg_desc_table[] as maybe_unused - Move ACPI code to acpi.c - Move platform device specific code to plat.c - Move structure and macros to header file - Use dev_groups in the driver structure - Use name space while exporting module symbols amd/pmf: - Switch to platform_get_resource() and devm_ioremap_resource() - Use dev_err_probe() to simplify error handling asus-laptop: - prefer strscpy() over strcpy() asus-wmi: - Fix inconsistent use of thermal policies - Use platform_profile_cycle() classmate-laptop: - Replace snprintf in show functions with sysfs_emit compal-laptop: - use sysfs_emit() instead of sprintf() dell-dcdbase: - Replace snprintf in show functions with sysfs_emit Documentation: alienware-wmi: - Describe THERMAL_INFORMATION operation 0x02 eeepc-laptop: - use sysfs_emit() instead of sprintf() hp: hp-bioscfg: - remove redundant if statement intel: - Add 'intel' prefix to the modules automatically intel-hid: - fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 intel/pmc: - Disable C1 auto-demotion during suspend - Refactor platform resume functions to use cnl_resume() intel/pmt: - allow user offset for PMT callbacks - Correct the typo 'ACCCESS_LOCAL' intel_scu_ipc: - Convert to check for errors first - Don't use "proxy" headers - Replace workaround by 32-bit IO - Save a copy of the entire struct intel_scu_ipc_data - Simplify code with cleanup helpers - Unify the flow in pwr_reg_rdwr() intel/vsec: - Remove a useless mutex MAINTAINERS: - adjust file entry in INTEL TPMI DRIVER - Change AMD PMF driver status to "Supported" - Update ISHTP ECLITE maintainer entry p2sb: - Cache correct PCI bar for P2SB on Gemini Lake panasonic-laptop: - Return errno correctly in show callback surface: aggregator_registry: - Add Surface Pro 9 5G Switch back to struct platform_driver:: - remove() think-lmi: - Add certificate as mechanism - Allow empty admin password - improve check if BIOS account security enabled - Multi-certificate support wmi: - Implement proper shutdown handling - Introduce to_wmi_driver() - Remove wmi_block_list - Replace dev_to_wdev() with to_wmi_device() x86: acer-wmi: - remove unused macros x86-android-tablets: - Add get_i2c_adap_by_handle() helper - Add support for getting i2c_adapter by PCI parent devname() - Add support for Vexia EDU ATLA 10 tablet -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZz3IswAKCRBZrE9hU+XO McdKAQCY9gIuqtHpYK0QIQYMoZOWhpiCzfZ96DDHqt4Wknh6NgD/YY6eESyDokyB 4BkujKwqo3cdGNPjIBy41jnNjekNsw8= =QEd2 -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - alienware WMAX thermal interface support - Split ACPI and platform device based amd/hsmp drivers - AMD X3D frequency/cache mode switching support - asus thermal policy fixes - Disable C1 auto-demotion in suspend to allow entering the deepest C-states - Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 - Replace intel_scu_ipc "workaround" with 32-bit IO - Correct *_show() function error handling in panasonic-laptop - Gemini Lake P2SB devfn correction - think-lmi Admin/System certificate authentication support - Disable WMI devices for shutdown, refactoring continues - Vexia EDU ATLA 10 tablet support - Surface Pro 9 5G (Arm/QCOM) support - Misc cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits) platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake platform/x86: panasonic-laptop: Return errno correctly in show callback Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02 alienware-wmi: create_thermal_profile() no longer brute-forces IDs alienware-wmi: Adds support to Alienware x17 R2 alienware-wmi: extends the list of supported models alienware-wmi: order alienware_quirks[] alphabetically platform/x86/intel/pmt: allow user offset for PMT callbacks platform/x86/amd/hsmp: Change the error type platform/x86/amd/hsmp: Add new error code and error logs platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused platform/x86: asus-wmi: Use platform_profile_cycle() platform/x86: asus-wmi: Fix inconsistent use of thermal policies platform/x86: hp: hp-bioscfg: remove redundant if statement MAINTAINERS: Update ISHTP ECLITE maintainer entry platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname() ... |
||
|
Linus Torvalds
|
9f5a6a1fe6 |
media updates for v6.13-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmc8Q80ACgkQCF8+vY7k 4RX+3g//dMBSmu3uC9OiXyfw3aB8w62RMeieRxSVPMdkiacUm1J8HyzHnXPXIUn3 tfBT9E/YbeFZ+PlrOXRDUi1i8jmN47VuwRe01rxxF/FdlYknC2eGH3Ug9DW90VBh wmZ1kSjyjizwDkKAm+Jc2xynTaX+iInJ4Kzp9RStDZPuaqj2Qzd1qVRk2FJwAYRh 5dTpi0W1PexjxQXDIcnHi/tPapGLSP5PnrunrAJR0tYfp60wrKMaxTO36yJzbnDP MxkF8A+9dWtePRqoPWxPIvnOVu/+Twc730xkQp62qPvwEM2HZRtU7cgQFlWos6p/ ijK2i6sAQslMhQ9oIyKlO7HpXX60rjE3XtdzEtGxBq6DyIqx1riN+OqJB2C4Cdsr 2qUET8aTIisPURw1ecNAbthvLt8tljBe08/eX0GYaWFjALJx3Pds23ahH8hw295N o3SY5NaGmO9Tg6HzYLSwfBmxgGpWDuRic6PDCVKok5mS5D1+uV/tu8fQFiNiFNVe Okufjvo7HtZ3+rWR90b/Udpz/lBB/dceppnUX2iKevrG190VHxEwJ2pQKkfdH9ha LUZQajikiv5rbGxKIGrjrCnjrJ24TC2vCSPhkgOb1r91LUY4RUV61c3hZbH73rzQ 2Ykwvmy+gpE4GEYiJRfSR6KlXdBruMa5FToLUHEK0uBMSlG5k7Q= =25BS -----END PGP SIGNATURE----- Merge tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - removal of the old omap4iss media driver - mantis: remove orphan mantis_core.h - add support for Raspberypi CFE - uvc driver got a co-maintainer - main media tree moved to git://linuxtv.org/media.git - lots of driver cleanups, updates and fixes * tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits) docs: media: update location of the media patches MAINTAINERS: update location of media main tree media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer media: platform: samsung: s5p-jpeg: Remove deadcode media: qcom: camss: Add MSM8953 resources media: dt-bindings: Add qcom,msm8953-camss media: qcom: camss: implement pm domain ops for VFE v4.1 media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available media: adv7180: Also check for "adi,force-bt656-4" media: dt-bindings: adv7180: Document 'adi,force-bt656-4' media: mgb4: Fix inconsistent input/output alignment in loopback mode media: replace obsolete hans.verkuil@cisco.com alias Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls media: atomisp: Add check for rgby_data memory allocation failure media: atomisp: remove redundant re-checking of err media: atomisp: Fix spelling errors reported by codespell media: atomisp: Remove License information boilerplate media: atomisp: Fix typos in comment media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h ... |
||
|
Tristram Ha
|
16220cb315 |
net: dsa: microchip: Add LAN9646 switch support to KSZ DSA driver
LAN9646 switch is a 6-port switch with functions like KSZ9897. It has 4 internal PHYs and 1 SGMII port. The chip id read from hardware is same as KSZ9477, so software driver needs to create a new chip id and group allowable functions under its chip data structure to differentiate the product. Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Link: https://patch.msgid.link/20241109015705.82685-3-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |