Add reset, clk dt bindings headers, and update compatible
support for AST2700 clk, silicon-id in yaml.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20241023090153.1395220-2-ryan_chen@aspeedtech.com
Signed-off-by: Lee Jones <lee@kernel.org>
The RTC and VBATTB don't share the MSTOP control bit (but only the bus
clock and the reset signal). As the MSTOP control is modeled though power
domains add power domain ID for the RTC device available on the
Renesas RZ/G3S SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241019084738.3370489-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.MX91 has similar Clock Control Module(CCM) design as i.MX93, only add
few new clock compared to i.MX93.
Add a new compatible string and some new clocks for i.MX91.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241023184651.381265-4-pengfei.li_1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
IMX93_CLK_END should be dropped as it is not part of the ABI.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241023184651.381265-3-pengfei.li_1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add clock definitions for the main clock and reset controllers of MT6735
(apmixedsys, topckgen, infracfg and pericfg).
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241017071708.38663-2-y.oudjana@protonmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add peric1, misc and hsi0/1 clock definitions.
- CMU_PERIC1 for USI, IC2 and I3C
- CMU_MISC for MISC, GIC and OTP
- HSI0 for PCIE
- HSI1 for USB and MMC
Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241009042110.2379903-2-sunyeal.hong@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add new entry to the SM8450 dt-bindings and add SM8475-specific clocks
to SM8450 GCC header file.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240818204348.197788-2-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Remove it entirely from the bindings, once Linux drivers stopped using
them.
Signed-off-by: Inbaraj E <inbaraj.e@samsung.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240917094355.37887-3-inbaraj.e@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Block comments should align the * on each line, as checkpatch rightfully
pointed out, so fix that style issue on the newly added rk3576 headers.
Fixes: 49c04453db ("dt-bindings: clock, reset: Add support for rk3576")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240909223149.85364-1-heiko@sntech.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document the device tree bindings for the Renesas RZ/V2H(P) SoC
Clock Pulse Generator (CPG).
CPG block handles the below operations:
- Generation and control of clock signals for the IP modules
- Generation and control of resets
- Control over booting
- Low power consumption and power supply domains
Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the
core clocks are a subset of the ones which are listed as part of section
4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset ID defines for rk3576.
Compared to the downstream bindings written by Elaine, this uses
continous gapless IDs starting at 0. Thus all numbers are
different between downstream and upstream, but names are kept
exactly the same.
Also add documentation for the rk3576 CRU core.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/0102019199a76766-f3a2b53f-d063-458b-b0d1-dfbc2ea1893c-000000@eu-west-1.amazonses.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
CLK_NR_CLKS and CLKPMU_NR_CLKS should not be part of the binding.
Remove since the kernel code no longer uses it.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/a3292ed0-3489-4887-8567-40ea4983c592@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Merge updates to MSM8998 GCC binding include file through topic branch,
to make available the newly added constants to both clock and DeviceTree
branch.
Add definitions for the Q6 BIMC, LPASS core and adsp smmu clocks,
required to enable audio functionality on MSM8998.
Add the GDSC definitions for the LPASS_ADSP_GDSC and LPASS_CORE_GDSC
as a final step to enable the required clock tree for the lpass iommu
and for the audio dsp itself.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240814-lpass-v1-1-a5bb8f9dfa8b@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the camera clock controller on
Qualcomm SM4450 platform.
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-5-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add dpum clock definitions and compatibles.
Also used clock name 'bus' instead of full clock name
dout_clkcmu_dpum_bus like other board cmu schema (GS101).
Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Link: https://lore.kernel.org/r/20240809-clk_dpum-v3-1-359decc30fe2@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos7885 SoC has a DWC3 USB Controller with Exynos USB PHY which in
theory supports USB3 SuperSpeed, but is only used as USB2 in all known
devices.
These, of course, need some clocks.
Add indices for these clocks.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-4-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The numbering in Exynos7885's FSYS CMU bindings has 4 duplicated by
accident, with the rest of the bindings continuing with 5.
Fix this by moving CLK_MOUT_FSYS_USB30DRD_USER to the end as 11.
Since CLK_MOUT_FSYS_USB30DRD_USER is not used in any device tree as of
now, and there are no other clocks affected (maybe apart from
CLK_MOUT_FSYS_MMC_SDIO_USER which the number was shared with, also not
used in a device tree), this is the least impactful way to solve this
problem.
Fixes: cd268e309c ("dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS")
Cc: stable@vger.kernel.org
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-2-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Allow PLLADIV2 and LVDSPLL to be referenced as a PMC_TYPE_CORE
clock from phandle in DT for sam9x7 SoC family.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240729070803.1990916-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Document the device tree bindings for the Renesas RZ/V2H(P) SoC
Clock Pulse Generator (CPG).
CPG block handles the below operations:
- Generation and control of clock signals for the IP modules
- Generation and control of resets
- Control over booting
- Low power consumption and power supply domains
Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the
core clocks are a subset of the ones which are listed as part of section
4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Merge the SM8550/SM8650 display clock controller binding header file
merge through a topic branch, to ensure the bindings are kept in sync
between clock and DeviceTree source branches.
The display clock controller indices for SM8650 and SM8550 are
completely equal. Replace the header file for qcom,sm8650-dispcc with
the symlink to the qcom,sm8550-dispcc header file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-7-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the camera clock controller on
Qualcomm SM8150 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240731062916.2680823-7-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB multiport controller needs a few missing resets, describe them
in the binding.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-1-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a constant for TMU PCLK clock. It acts simultaneously as an
interface clock (to access TMU registers) and an operating clock which
makes TMU IP-core functional.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240723163311.28654-1-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CLK_NR_CLKS should not be part of the binding.
Remove since the kernel code no longer uses it.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6f21c09b-e8d2-4749-aca6-572c79df775d@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Merge SM8650 video and camera clock drivers through topic branch, to
make available the DeviceTree binding includes to the DeviceTree source
branches as well.
Add device tree bindings for the camera clock controller on
Qualcomm SM8650 platform.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-7-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SM8650 video clock controller has most clocks same as SM8450,
but it also has few additional clocks and resets. Add device tree
bindings for the video clock controller on Qualcomm SM8650 platform
by defining these additional clocks and resets on top of SM8450.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-3-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clock definitions in <dt-bindings/clock/r8a779?-clock.h> were
superseded by those in <dt-bindings/clock/r8a779?-cpg-mssr.h> a long
time ago.
The last DTS user of these files was removed in commit 362b334b17
("ARM: dts: r8a7791: Convert to new CPG/MSSR bindings") in v4.15.
Driver support for the old bindings was removed in commit
58256143cf ("clk: renesas: Remove R-Car Gen2 legacy DT clock
support") in v5.5, so there is no point to keep on carrying these.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/d4abb688d666be35e99577a25b16958cbb4c3c98.1718796005.git.geert+renesas@glider.be
CLK_NR_CLKS should not be part of the binding. Let's drop it, since
the kernel code no longer uses it either.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240606143401.32454-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the required clock bindings for the GPADC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240605172049.231108-2-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add bindings for the clock generator of divider/mux and gates working
for other subsystem than RP subsystem for Sophgo SG2042.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add bindings for the gate clocks of RP subsystem for Sophgo SG2042.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add bindings for the pll clocks for Sophgo SG2042.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
QCA8386/QCA8084 includes the clock & reset controller that is
accessed by MDIO bus. Two work modes are supported, qca8386 works
as switch mode, qca8084 works as PHY mode.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-3-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 'sys_pll' input is an optional clock that can be used to generate
'sys_pll_div16', which serves as one of the sources for the GEN clock.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240515185103.20256-5-ddrokosov@salutedevices.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The 'syspll' PLL is a general-purpose PLL designed specifically for the
CPU clock. It is capable of producing output frequencies within the
range of 768MHz to 1536MHz.
The 'syspll_in' source clock is an optional parent connection from the
peripherals clock controller.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240515185103.20256-3-ddrokosov@salutedevices.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The DPHY's APB clock is required to be exposed in order to be able to
enable it and access the phy's registers.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240509140653.168591-3-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add device tree bindings for the video clock controller on Qualcomm
SM7150 platform.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240505201038.276047-8-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the camera clock controller on Qualcomm
SM7150 platform.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240505201038.276047-6-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the display clock controller on Qualcomm
SM7150 platform.
Co-developed-by: David Wronek <david@mainlining.org>
Signed-off-by: David Wronek <david@mainlining.org>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240505201038.276047-4-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
drivers. And there's zero diff in the core clk framework. Instead we have new
clk drivers for STM and Sophgo, with Samsung^WGoogle in third for the diffstat
because they introduced HSI0 and HSI2 clk drivers for Google's GS101 SoC (high
speed interface things like PCIe, UFS, and MMC). Beyond those big diffs there's
the usual updates to various clk drivers for incorrect parent descriptions or
mising MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
interesting here.
New Drivers:
- STM32MP257 SoC clk driver
- Airoha EN7581 SoC clk driver
- Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
- Loongson-2k0500 and Loongson-2k2000 SoC clk driver
- Add HSI0 and HSI2 clock controllers for Google GS101
- Add i.MX95 BLK CTL clock driver
Updates:
- Allocate clk_ops dynamically for SCMI clk driver
- Add support in qcom RCG and RCG2 for multiple configurations for the same frequency
- Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues
- Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards
- Cleanups and fixes for Qualcomm Stromer PLLs
- Reduce max CPU frequency on Qualcomm APSS IPQ5018
- Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
clk drivers
- Make Qualcomm MSM8998 Venus clocks functional
- Cleanup downstream remnants related to DisplayPort across Qualcomm
SM8450, SM6350, SM8550, and SM8650
- Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
- Use a specific Qualcomm QCS404 compatible for the otherwise generic
HFPLL
- Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
- Remove an unused field in the Qualcomm RPM clk driver
- Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
global clock controller drivers
- Allow choice of manual or firmware-driven control over PLLs, needed
to fully implement CPU clock controllers on Exynos850
- Correct PLL clock IDs on ExynosAutov9
- Propagate certain clock rates to allow setting proper SPI clock
rates on Google GS101
- Mark certain Google GS101 clocks critical
- Convert old S3C64xx clock controller bindings to DT schema
- Add new PLL rate and missing mux on Rockchip rk3568
- Add missing reset line on Rockchip rk3588
- Removal of an unused field in struct rockchip_mmc_clock
- Amlogic s4/a1: add regmap maximum register for proper debugfs dump
- Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
- Amlogic pll driver: print clock name on lock error to help debug
- Amlogic vclk: finish dsi clock path support
- Amlogic license: fix occurence "GPL v2" as reported by checkpatch
- Add PM runtime support to i.MX8MP Audiomix
- Add DT schema for i.MX95 Display Master Block Control
- Convert to platform remove callback returning void for i.MX8MP
Audiomix
- Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas R-Car V4M
- Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
- Prepare power domain support for Renesas RZ/G2L family members, and add
actual support on Renesas RZ/G3S SoC
- Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas R-Car V4M
- Add additional constraints to Allwinner A64 PLL MIPI clock
- Fix autoloading sunxi-ng clocks when build as a module
-----BEGIN PGP SIGNATURE-----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=YoVJ
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"I'm actually surprised this time. There aren't any new Qualcomm SoC
clk drivers. And there's zero diff in the core clk framework.
Instead we have new clk drivers for STM and Sophgo, with
Samsung^WGoogle in third for the diffstat because they introduced HSI0
and HSI2 clk drivers for Google's GS101 SoC (high speed interface
things like PCIe, UFS, and MMC).
Beyond those big diffs there's the usual updates to various clk
drivers for incorrect parent descriptions or mising
MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
interesting here.
New Drivers:
- STM32MP257 SoC clk driver
- Airoha EN7581 SoC clk driver
- Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
- Loongson-2k0500 and Loongson-2k2000 SoC clk driver
- Add HSI0 and HSI2 clock controllers for Google GS101
- Add i.MX95 BLK CTL clock driver
Updates:
- Allocate clk_ops dynamically for SCMI clk driver
- Add support in qcom RCG and RCG2 for multiple configurations for
the same frequency
- Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve
issues
- Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some
boards
- Cleanups and fixes for Qualcomm Stromer PLLs
- Reduce max CPU frequency on Qualcomm APSS IPQ5018
- Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
clk drivers
- Make Qualcomm MSM8998 Venus clocks functional
- Cleanup downstream remnants related to DisplayPort across Qualcomm
SM8450, SM6350, SM8550, and SM8650
- Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
- Use a specific Qualcomm QCS404 compatible for the otherwise generic
HFPLL
- Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
- Remove an unused field in the Qualcomm RPM clk driver
- Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
global clock controller drivers
- Allow choice of manual or firmware-driven control over PLLs, needed
to fully implement CPU clock controllers on Exynos850
- Correct PLL clock IDs on ExynosAutov9
- Propagate certain clock rates to allow setting proper SPI clock
rates on Google GS101
- Mark certain Google GS101 clocks critical
- Convert old S3C64xx clock controller bindings to DT schema
- Add new PLL rate and missing mux on Rockchip rk3568
- Add missing reset line on Rockchip rk3588
- Removal of an unused field in struct rockchip_mmc_clock
- Amlogic s4/a1: add regmap maximum register for proper debugfs dump
- Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
- Amlogic pll driver: print clock name on lock error to help debug
- Amlogic vclk: finish dsi clock path support
- Amlogic license: fix occurence "GPL v2" as reported by checkpatch
- Add PM runtime support to i.MX8MP Audiomix
- Add DT schema for i.MX95 Display Master Block Control
- Convert to platform remove callback returning void for i.MX8MP
Audiomix
- Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas
R-Car V4M
- Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
- Prepare power domain support for Renesas RZ/G2L family members, and
add actual support on Renesas RZ/G3S SoC
- Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas
R-Car V4M
- Add additional constraints to Allwinner A64 PLL MIPI clock
- Fix autoloading sunxi-ng clocks when build as a module"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits)
clk: samsung: Don't register clkdev lookup for the fixed rate clocks
clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
clk: qcom: Fix SM_GPUCC_8650 dependencies
clk: qcom: Fix SC_CAMCC_8280XP dependencies
dt-bindings: clocks: stm32mp25: add access-controllers description
clock, reset: microchip: move all mpfs reset code to the reset subsystem
clk: samsung: gs101: drop unused HSI2 clock parent data
clk: rockchip: rk3568: Add PLL rate for 724 MHz
clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
dt-bindings: clock: fixed: Define a preferred node name
clk: meson: s4: fix module autoloading
clk: samsung: gs101: mark some apm UASC and XIU clocks critical
clk: imx: imx8mp: Convert to platform remove callback returning void
clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
clk: bcm: rpi: Assign ->num before accessing ->hws
clk: bcm: dvp: Assign ->num before accessing ->hws
clk: samsung: gs101: add support for cmu_hsi2
clk: samsung: gs101: add support for cmu_hsi0
...
Add dt schema documentation and clock IDs for the High Speed Interface
2 (HSI2) clock management unit. This CMU feeds high speed interfaces
such as PCIe and UFS.
[AD: * keep CMUs in google,gs101.h sorted alphabetically
* resolve minor merge conflicts in google,gs101-clock.yaml
* s/ufs_embd/ufs s/mmc_card/mmc
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20240429-hsi0-gs101-v3-1-f233be0a2455@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add dt-schema documentation and clock IDs for the high speed interface
0 HSI0 clock management unit. This is used (amongst others) for USB.
While the usual (sed) script has been used to derive the linux clock
IDs from the data sheet, one manual tweak was applied to fix a typo
which we don't want to carry:
HSI0_USPDPDBG_USER -> HSI0_USBDPDBG_USER (note USB vs USP).
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240423-hsi0-gs101-v1-1-2c3ddb50c720@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In the new Loongson-2K family of SoCs, more clock indexes are needed,
such as clock gates.
The patch adds these clock indexes
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/76844e0e4dae290425f7c8025f7f36810cb3a3a8.1712731524.git.zhoubinbin@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The USB480M clock can source from a MUX that selects the clock to come
from either of the USB-phy internal 480MHz PLLs. These clocks are
provided by the USB phy driver. This adds the define for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240405-clk-rk3568-usb480m-phy-mux-v1-1-6c89de20a6ff@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The M2 (CRU main clock), M3 (LCDC Video Clock), and AT (Cortex-A55 Debug
clock) core clocks are only present on RZ/G2UL, not on RZ/Five.
Annotate this in the comments, like is already done for module clocks
and resets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/ffcdcd479c76b92f67481836a33ec86e97f85634.1708944903.git.geert+renesas@glider.be
Add device nodes for the Timer Units (TMU) on the R-Mobile APE6 SoC,
and the clocks serving them.
Note that TMU channels 1 and 2 are not added, as their interrupts are
not wired to the interrupt controller for the AP-System Core (INTC-SYS),
only to the interrupt controller for the AP-Realtime Core (INTC-RT).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/1a60832f3ba37afb4a5791f4e5db4610ab31beb3.1710864964.git.geert+renesas@glider.be
- Increase dev_id len for clkdev lookups
* clk-samsung: (25 commits)
clk: samsung: Add CPU clock support for Exynos850
clk: samsung: Pass mask to wait_until_mux_stable()
clk: samsung: Keep register offsets in chip specific structure
clk: samsung: Keep CPU clock chip specific data in a dedicated struct
clk: samsung: Pass register layout type explicitly to CLK_CPU()
clk: samsung: Pass actual CPU clock registers base to CPU_CLK()
clk: samsung: Group CPU clock functions by chip
clk: samsung: Use single CPU clock notifier callback for all chips
clk: samsung: Reduce params count in exynos_register_cpu_clock()
clk: samsung: Pull struct exynos_cpuclk into clk-cpu.c
clk: samsung: Improve clk-cpu.c style
dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1
clk: samsung: gs101: add support for cmu_peric1
clk: samsung: gs101: drop extra empty line
dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit
clk: samsung: exynos850: Propagate SPI IPCLK rate change
clk: samsung: gs101: gpio_peric0_pclk needs to be kept on
clk: samsung: exynos850: Add PDMA clocks
dt-bindings: clock: tesla,fsd: Fix spelling mistake
clk: samsung: gs101: add support for cmu_peric0
...
* clk-imx:
clk: imx: imx8mp: Fix SAI_MCLK_SEL definition
clk: imx: scu: Use common error handling code in imx_clk_scu_alloc_dev()
clk: imx: composite-8m: Delete two unnecessary initialisations in __imx8m_clk_hw_composite()
clk: imx: composite-8m: Less function calls in __imx8m_clk_hw_composite() after error detection
* clk-rockchip:
clk: rockchip: rk3399: Allow to set rate of clk_i2s0_frac's parent
clk: rockchip: rk3588: use linked clock ID for GATE_LINK
clk: rockchip: rk3588: fix indent
clk: rockchip: rk3588: fix pclk_vo0grf and pclk_vo1grf
dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
dt-bindings: clock: rk3588: drop CLK_NR_CLKS
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
clk: rockchip: rk3568: Add PLL rate for 128MHz
* clk-clkdev:
clkdev: Update clkdev id usage to allow for longer names
* clk-rate-exclusive:
clk: Add a devm variant of clk_rate_exclusive_get()
Add PCLK_VO1GRF to complement PCLK_VO0GRF. This will be needed
for HDMI support.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240126182919.48402-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
CLK_NR_CLKS should not be part of the binding. Let's drop it, since
the kernel code no longer uses it either.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240126182919.48402-3-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Document CPU clock management unit compatibles and add corresponding
clock indices. Exynos850 has two CPU clusters (CL0 and CL1), each
containing 4 Cortex-A55 cores. CPU PLLs are generating main CPU clocks
for each cluster, and there are alternate ("switch") clocks that can be
used temporarily while re-configuring the PLL for the new rate. ACLK,
ATCLK, PCLKDBG and PERIPHCLK clocks are driving corresponding buses.
CLK_CLUSTERx_SCLK are actual leaf CPU clocks and should be used to
change CPU rates. Also some CoreSight clocks can be derived from
DBG_USER (debug clock).
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240224202053.25313-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
According to the R-Car V4H Series Hardware User’s Manual Rev.1.00, the
parent clock of the Pin Function (PFC/GPIO) module clocks is the CP
clock.
Fix this by adding the missing CP clock, and correcting the PFC parents.
Fixes: f2afa78d5a ("dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions")
Fixes: 36ff366033 ("clk: renesas: r8a779g0: Add PFC/GPIO clocks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5401fccd204dc90b44f0013e7f53b9eff8df8214.1706197297.git.geert+renesas@glider.be
Add dt-schema documentation and clock IDs for the Connectivity
Peripheral 1 (PERIC1) clock management unit.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-3-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add new defines for some more BCRs found on MSM8953.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
[luca: expand commit message, add more resets]
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240125-msm8953-mdss-reset-v2-1-fd7824559426@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add bindings documentation for the X1E80100 Camera Clock Controller.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-5-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are 3 undocumented outputs of the MSSPLL that are used for the CAN
bus, "user crypto" module and eMMC. Add their clock IDs so that they can
be hooked up in DT.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add gcc video axic, axi0 and axi1 resets for the global clock controller
on sm8150.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240111-sm8150-dfs-support-v2-2-6edb44c83d3b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
clock management unit.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119111132.1290455-2-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
SM8650 based on the diffstat. Otherwise this is a collection of non-critical
fixes and cleanups to various clk drivers and their DT bindings. Nothing is
changed in the core clk framework this time, although there's a patch to fix a
basic clk type initialization function. In general, this pile looks to be on
the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling separate
memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000 and
QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers
-----BEGIN PGP SIGNATURE-----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=t0CI
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
A new drivers/cache/ subsystem is added to contain drivers for abstracting
cache flush methods on riscv and potentially others, as this is needed for
handling non-coherent DMA but several SoCs require nonstandard hardware
methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and MT8195,
and driver support for MT8188 along with some code refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and hisilicon
-----BEGIN PGP SIGNATURE-----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=4bKY
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
Add MT7988 clock dt-bindings for topckgen, apmixedsys, infracfg,
ethernet and xfipll subsystem clocks.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/27f99db432e9ccc804cc5b6501d7d17d72cae879.1702849494.git.daniel@makrotopia.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Support is added for the new Snapdragon 8 Gen 3 mobile platform, with
support for the MTP and QRD development devices, the new Snapdragon X
Elite compute platform with QCP and CRD development/references devices,
the QCS6590/QCM6490 platform with support for the IDP development device
and the Robotics RB3gen2 board, the Huawei Honor 5X/GR5 handset
built on MSM8939, and Xiaomi Pad 6 on SM8250.
On IPQ5018 and IPQ6018 platform support for CPUfreq, USB, and one
additional QUP SPI controller is added.
CPU OPP tables are selectively enabled based on fuses, for both IPQ5332
and IPQ6018. IPQ6018 gains description of a few more SPI and UART nodes.
Common elements of the IPQ9574 RDP boards are refactored into a common
include file. IPQ9574 also gains description of its LEDs and WPS
busttons.
MSM8916 finally gets the DSP-based audio described, and this is enabled
for a variety of boards. Acer Iconia Talk S and Loncheer L8910 gains
notification LED, battery and charger support is added to Loncheer
L8150, and GPU is enabled for Samsung Galaxy Tab A.
Similariy DSP-based audio is added on MSM8939, the BAM-DMUX support is
enabled as well. The Longcheer L9100 gains RGB notification LED support,
and the wireless subsystem is enabled.
Missing SPI controllers are described on MSM8953. On MSM8996 the MPM is
enabled, to allow using wakeup interrupts. Interconnect providers, MPM
and display are added to QCM2290.
UFS, remoteprocs and WiFi is enabled for Fairphone FP5.
On Fairphone FP3 audio, WiFi and Bluetooth are enabled.
On the Robotics RB1, HDMI and the CAN bus controller are added. On
Robotics RB2 Bluetooth, the modem remoteproc and WiFi are enabled.
Bluetooth is enabled on the Robotics RB5.
On SA8775P tsens and thermal is added, as well as the random number
generator.
Sound and RTC support is added for the Acer Aspire 1.
On SC7280 DeviceTree is refactored, in order to allow non-Chrome devices
to inherit the base dtsi. Support for UFS, crypto, TrustZone based
remoteprocs, the Camera Control Interface (CCI) and random number
generator support are added. Additionally a variety of smaller fixes are
introduced.
A variety of fixes are introduced for SC8180X, in particular missing
power-domains and interconnects.
On SC8280XP the camera clock controller is added, and a number of
smaller fixes are introduced.
The display subsystem in SDM670 is described.
On SDX75 interconnect providers are added, as is USB3 and the related
PHY, which is then enabled on the IDP device.
On SM6115 interconnect providers are added and existing clients are
wired up. A UART controller is added as well.
The MPM is added, to provide wakeup interrutps, on SM6375. The modem
subsystem, and WiFi are enabled on Sony Xperia 10 IV, a few regulator
supplies are corrected.
On SM8150 the DisplayPort controller is added, for USB Type-C output,
which together with the addition of HDMI is described on the HDK board.
GPU and random number generator support are added to SM8450, and enabled
on the HDK board.
On SM8550 GPU, IPA, random number generator, missing SoundWire ports are
added, and enabled on both MTP and QRD devices.
Additionally a large number of smaller functional and DeviceTree binding
validation issues are corrected across a variety of platforms.
-----BEGIN PGP SIGNATURE-----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=WKon
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=leqb
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.8
Support is added for the new Snapdragon 8 Gen 3 mobile platform, with
support for the MTP and QRD development devices, the new Snapdragon X
Elite compute platform with QCP and CRD development/references devices,
the QCS6590/QCM6490 platform with support for the IDP development device
and the Robotics RB3gen2 board, the Huawei Honor 5X/GR5 handset
built on MSM8939, and Xiaomi Pad 6 on SM8250.
On IPQ5018 and IPQ6018 platform support for CPUfreq, USB, and one
additional QUP SPI controller is added.
CPU OPP tables are selectively enabled based on fuses, for both IPQ5332
and IPQ6018. IPQ6018 gains description of a few more SPI and UART nodes.
Common elements of the IPQ9574 RDP boards are refactored into a common
include file. IPQ9574 also gains description of its LEDs and WPS
busttons.
MSM8916 finally gets the DSP-based audio described, and this is enabled
for a variety of boards. Acer Iconia Talk S and Loncheer L8910 gains
notification LED, battery and charger support is added to Loncheer
L8150, and GPU is enabled for Samsung Galaxy Tab A.
Similariy DSP-based audio is added on MSM8939, the BAM-DMUX support is
enabled as well. The Longcheer L9100 gains RGB notification LED support,
and the wireless subsystem is enabled.
Missing SPI controllers are described on MSM8953. On MSM8996 the MPM is
enabled, to allow using wakeup interrupts. Interconnect providers, MPM
and display are added to QCM2290.
UFS, remoteprocs and WiFi is enabled for Fairphone FP5.
On Fairphone FP3 audio, WiFi and Bluetooth are enabled.
On the Robotics RB1, HDMI and the CAN bus controller are added. On
Robotics RB2 Bluetooth, the modem remoteproc and WiFi are enabled.
Bluetooth is enabled on the Robotics RB5.
On SA8775P tsens and thermal is added, as well as the random number
generator.
Sound and RTC support is added for the Acer Aspire 1.
On SC7280 DeviceTree is refactored, in order to allow non-Chrome devices
to inherit the base dtsi. Support for UFS, crypto, TrustZone based
remoteprocs, the Camera Control Interface (CCI) and random number
generator support are added. Additionally a variety of smaller fixes are
introduced.
A variety of fixes are introduced for SC8180X, in particular missing
power-domains and interconnects.
On SC8280XP the camera clock controller is added, and a number of
smaller fixes are introduced.
The display subsystem in SDM670 is described.
On SDX75 interconnect providers are added, as is USB3 and the related
PHY, which is then enabled on the IDP device.
On SM6115 interconnect providers are added and existing clients are
wired up. A UART controller is added as well.
The MPM is added, to provide wakeup interrutps, on SM6375. The modem
subsystem, and WiFi are enabled on Sony Xperia 10 IV, a few regulator
supplies are corrected.
On SM8150 the DisplayPort controller is added, for USB Type-C output,
which together with the addition of HDMI is described on the HDK board.
GPU and random number generator support are added to SM8450, and enabled
on the HDK board.
On SM8550 GPU, IPA, random number generator, missing SoundWire ports are
added, and enabled on both MTP and QRD devices.
Additionally a large number of smaller functional and DeviceTree binding
validation issues are corrected across a variety of platforms.
* tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (288 commits)
arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting
arm64: dts: qcom: sc8180x: Describe the GIC redistributor
arm64: dts: qcom: sc8180x: Add interconnects to UFS
arm64: dts: qcom: sc8180x: Add missing MDP clocks
arm64: dts: qcom: sc8180x: Add UFS GDSC
arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi
arm64: dts: qcom: sc7280: Rename reserved-memory nodes
arm64: dts: qcom: sc7280: Remove unused second MPSS reg
arm64: dts: qcom: sdm670: add display subsystem
arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode
arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host
arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY
arm64: dts: qcom: sm8150: add DisplayPort controller
arm64: dts: qcom: sm8150-hdk: fix SS USB regulators
arm64: dts: qcom: sm8150-hdk: enable HDMI output
arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX
arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes
arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
arm64: dts: qcom: qcm2290: Hook up MPM
...
Link: https://lore.kernel.org/r/20231219145402.874161-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The gs101 clock defines from the bindings header are derived from the
clock register names found in the datasheet under some certain rules.
The CMU TOP gate clock defines missed to include the required "CMU"
differentiator which will cause collisions with the gate clock defines
of other clock units. Rename the TOP gate clock defines to include "CMU".
Update the clock driver to use the new defines in order to not break
compilation and bisect-ability. There are no device trees that use the
previous defines.
Fixes: 0a910f1606 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231218064333.479885-1-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Adds clock and reset binding entries for STM32MP25 SoC family
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231208143700.354785-4-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add all the available resets for the video clock controller
on sm8150.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
166 was skipped by mistake and two clocks:
* CLK_MOUT_CMU_HSI0_USBDPDGB
* CLK_GOUT_HSI0_USBDPDGB
Have an incorrect DGB ending instead of DBG.
This is an ABI break, but as the patch was only applied yesterday this
header has never been in an actual release so it seems better to fix
this early than ignore it.
Fixes: 0a910f1606 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-7-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Provide dt-schema documentation for Google gs101 SoC clock controller.
Currently this adds support for cmu_top, cmu_misc and cmu_apm.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231209233106.147416-3-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add device tree bindings for global clock controller on X1E80100 SoCs.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205061002.30759-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge SM8650 GCC, TCSRCC, DISPCC, GPUCC and RPMHCC bindings through a
topic branch to make it possible to also merge and use the constants in
the DeviceTree branch.
When adding in the indexes for this clock-controller we missed
GCC_CAMSS_CSI2_AHB_CLK, GCC_CAMSS_CSI2_CLK, GCC_CAMSS_CSI2PHY_CLK,
GCC_CAMSS_CSI2PIX_CLK and GCC_CAMSS_CSI2RDI_CLK.
Add them in now.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231029061948.505883-1-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the camera clock controller on
Qualcomm SC8280XP platform.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231026105345.3376-3-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Make clk kunit tests work with lockdep
- Fix clk gate kunit test for big-endian
- Convert more than a handful of clk drivers to use regmap maple tree
- Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk
implementation
* clk-renesas: (23 commits)
clk: renesas: r9a08g045: Add clock and reset support for SDHI1 and SDHI2
clk: renesas: rzg2l: Use %x format specifier to print CLK_ON_R()
clk: renesas: Add minimal boot support for RZ/G3S SoC
clk: renesas: rzg2l: Add divider clock for RZ/G3S
clk: renesas: rzg2l: Refactor SD mux driver
clk: renesas: rzg2l: Remove CPG_SDHI_DSEL from generic header
clk: renesas: rzg2l: Add struct clk_hw_data
clk: renesas: rzg2l: Add support for RZ/G3S PLL
clk: renesas: rzg2l: Remove critical area
clk: renesas: rzg2l: Fix computation formula
clk: renesas: rzg2l: Trust value returned by hardware
clk: renesas: rzg2l: Lock around writes to mux register
clk: renesas: rzg2l: Wait for status bit of SD mux before continuing
clk: renesas: rcar-gen3: Extend SDnH divider table
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: renesas: r8a7795: Constify r8a7795_*_clks
clk: renesas: r9a06g032: Name anonymous structs
clk: renesas: r9a06g032: Fix kerneldoc warning
clk: renesas: rzg2l: Use u32 for flag and mux_flags
clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields
...
* clk-kunit:
clk: Fix clk gate kunit test on big-endian CPUs
clk: Parameterize clk_leaf_mux_set_rate_parent
clk: Drive clk_leaf_mux_set_rate_parent test from clk_ops
* clk-regmap:
clk: versaclock7: Convert to use maple tree register cache
clk: versaclock5: Convert to use maple tree register cache
clk: versaclock3: Convert to use maple tree register cache
clk: versaclock3: Remove redundant _is_writeable()
clk: si570: Convert to use maple tree register cache
clk: si544: Convert to use maple tree register cache
clk: si5351: Convert to use maple tree register cache
clk: si5341: Convert to use maple tree register cache
clk: si514: Convert to use maple tree register cache
clk: cdce925: Convert to use maple tree register cache
* clk-frac-divider:
clk: fractional-divider: tests: Add test suite for edge cases
clk: fractional-divider: Improve approximation when zero based and export
- Add consumer info to clk debugfs
- Fix various clk drivers that have clk_hw_onecell_data not at the end
of an allocation
* clk-debugfs:
clk: Allow phase adjustment from debugfs
clk: Show active consumers of clocks in debugfs
* clk-spreadtrum:
clk: sprd: Composite driver support offset config
* clk-sifive:
clk: sifive: Allow building the driver as a module
clk: analogbits: Allow building the library as a module
* clk-counted:
clk: socfpga: agilex: Add bounds-checking coverage for struct stratix10_clock_data
clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data
clk: visconti: Add bounds-checking coverage for struct visconti_pll_provider
clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider
* clk-qcom: (36 commits)
clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider
clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq5018: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: gcc-ipq6018: add QUP6 I2C clock
clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll
clk: qcom: clk-alpha-pll: introduce stromer plus ops
clk: qcom: config IPQ_APSS_6018 should depend on QCOM_SMEM
clk: qcom: videocc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: gpucc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: Replace of_device.h with explicit includes
clk: qcom: smd-rpm: Move CPUSS_GNoC clock to interconnect
clk: qcom: cbf-msm8996: Convert to platform remove callback returning void
clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src
clk: qcom: Add GCC driver support for SM4450
dt-bindings: clock: qcom: Add GCC clocks for SM4450
...
Add documentation for the RZ/G3S CPG. The RZ/G3S CPG module is almost
identical to the one available in RZ/G2{L,UL}, the exception being some
core clocks as follows:
- The SD clock is composed of a mux and a divider, and the divider
has some limitations (div = 1 cannot be set if mux rate is 800MHz),
- There are 3 SD clocks,
- The OCTA and TSU clocks are specific to RZ/G3S,
- PLL1/4/6 are specific to RZ/G3S with its own computation formula.
Even with this RZ/G3S could use the same bindings as RZ/G2L.
Along with documentation bindings for the RZ/G3S (R9A08G045) Clock Pulse
Generator (CPG) core clocks, module clocks and resets were added.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-13-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The TRM shows there is only one AUDIOMIX PDM Root Clock Select
register, and it's called IMX8MP_CLK_AUDIOMIX_PDM_SEL. That
selector doesn't appear to have any more children and the
MICFIL driver can reference IMX8MP_CLK_AUDIOMIX_PDM_SEL
directly without the need for any other. Remove this
errant clock, since it doesn't really exist.
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230831044431.250338-3-aford173@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add support for qcom global clock controller bindings for SM4450 platform.
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230909123431.1725728-4-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
According to a commit in the 3.4 vendor kernel sources[0] the
ocmemcx_ahb_clk clock "is controlled by RPM and should not be touched by
APPS.".
[0] 37df5f2d91
And indeed, when using MDSS+GPU+OCMEM on MSM8226 and not using
clk_ignore_unused, when Linux tries to disable the clock the device
crashes and reboots.
And since there's also no evidence of this clock in msm8974 vendor
kernel sources, remove the clock for msm8226 and msm8974.
Fixes: d8b212014e ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230902-msm8226-ocmemcx_ahb_clk-remove-v1-1-8124dbde83b9@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the camera clock controller on
Qualcomm SM8550 platform.
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-2-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
changes to the clk framework this time around. That's probably because everyone
was on vacation (yours truly included). We did lose a couple clk drivers this
time around because nobody was using those devices. That skews the diffstat a
bit, but either way, nothing looks out of the ordinary here. The usual suspects
are chugging along adding support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a handful of
patches that move the NR_CLKS define from the DT binding header to the driver.
There's even patches that migrate drivers to use clk_parent_data and clk_hw to
describe clk tree topology. It seems that the spring (summer?) cleaning bug got
some folks, or the semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio codec on
RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs
- Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative
parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher) clock rate
for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to
the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver
- Support retention for the Qualcomm SC8280XP display clock controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix
issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250,
while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for correctness
- Extend the Qualcomm SM83550 Video clock controller to support SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3,
M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow
glitch free switching
-----BEGIN PGP SIGNATURE-----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=h2Jz
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share code
with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check
for unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline
Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller,
Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations
-----BEGIN PGP SIGNATURE-----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=kl+z
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Remove non-OF mmp clk drivers
- Move number of clks from DT headers to drivers
* clk-imx:
clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
clk: imx: pll14xx: align pdiv with reference manual
clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
clk: imx25: make __mx25_clocks_init return void
clk: imx25: print silicon revision during init
dt-bindings: clocks: imx8mp: make sai4 a dummy clock
clk: imx8mp: fix sai4 clock
clk: imx: imx8ulp: update SPLL2 type
clk: imx: pllv4: Fix SPLL2 MULT range
clk: imx: imx8: add audio clock mux driver
dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()
clk: imx: clk-gpr-mux: Simplify .determine_rate()
clk: imx: Add 519.75MHz frequency support for imx9 pll
clk: imx93: Add PDM IPG clk
dt-bindings: clock: imx93: Add PDM IPG clk
* clk-samsung:
dt-bindings: clock: samsung: remove define with number of clocks
clk: samsung: exynoautov9: do not define number of clocks in bindings
clk: samsung: exynos850: do not define number of clocks in bindings
clk: samsung: exynos7885: do not define number of clocks in bindings
clk: samsung: exynos5433: do not define number of clocks in bindings
clk: samsung: exynos5420: do not define number of clocks in bindings
clk: samsung: exynos5410: do not define number of clocks in bindings
clk: samsung: exynos5260: do not define number of clocks in bindings
clk: samsung: exynos5250: do not define number of clocks in bindings
clk: samsung: exynos4: do not define number of clocks in bindings
clk: samsung: exynos3250: do not define number of clocks in bindings
* clk-annotate:
clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by
clk: Annotate struct clk_hw_onecell_data with __counted_by
* clk-marvell:
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
clk: mmp: Remove old non-OF clock drivers
* clk-lmk:
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
- Add Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
- Introduce kstrdup_and_replace() and use it
* clk-versa:
clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
clk: versaclock3: Switch to use i2c_driver's probe callback
clk: Add support for versa3 clock driver
dt-bindings: clock: Add Renesas versa3 clock generator bindings
* clk-strdup:
clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
lib/string_helpers: Add kstrdup_and_replace() helper
* clk-amlogic: (22 commits)
dt-bindings: soc: amlogic: document System Control registers
dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
clk: meson: axg-audio: move bindings include to main driver
clk: meson: meson8b: move bindings include to main driver
clk: meson: a1: move bindings include to main driver
clk: meson: eeclk: move bindings include to main driver
clk: meson: aoclk: move bindings include to main driver
dt-bindings: clk: axg-audio-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
dt-bindings: clk: meson8b-clkc: expose all clock ids
dt-bindings: clk: g12a-aoclkc: expose all clock ids
dt-bindings: clk: g12a-clks: expose all clock ids
dt-bindings: clk: axg-clkc: expose all clock ids
dt-bindings: clk: gxbb-clkc: expose all clock ids
clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
...
* clk-allwinner:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: Modify mismatched function name
clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
* clk-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Correct also the format // -> .* in few Allwinner binding headers as
pointed out by checkpatch:
WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-4-f9271bd7eaa5@skole.hr
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-3-f9271bd7eaa5@skole.hr
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-2-f9271bd7eaa5@skole.hr
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-1-f9271bd7eaa5@skole.hr
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Initial support for the SM4450 platform and the QRD device thereon is
added.
The IPQ5018 platform is introduced, and the RDP432-C2 board thereon.
A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based
LEDs and buttons.
On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added.
On MSM8916, the D3 camera mezzanine is improved and refactored out to
its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with
charger, while Samsung Galaxy J5 and E5 gains touchscreen support.
A few fixes for MSM8939 are introduced, and initial support for Samsung
Galaxy A7 is add.
Support for scaling the cache bus fabric is introduced on MSM8996. A
missing interrupt for the USB2 controller is added. The touchscreen vio
supply on Xiaomi Mi 5 is corrected, and a few other cleanups are
introduces across other devices.
The display controller is introduced for MSM8998, a few clock fixes are
introduced and missing power domains are added for the multimedia
subsystem iommu.
Reserved memory-regions and reserved GPIO lists are updated for the
QDU/QRU1000 IDPs.
USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is
enabled for the RB2.
PCIe and Ethernet support is introduced on SA8775P, and enabled for the
Ride board.
On SC7180 the PSCI integration is refactored, to allow supporting
devices with the Qualcomm firmware. BWMON is introduced, alongside the
CPUfreq-based bus voting.
A number of fixes are added for SC8180X, on the Primus and Lenovo Flex
5G devices pmic_glink is introduced and wired up, to provide support for
external display.
Missing SCM interconnect is added to SC8280XP, and the PDC is marked as
wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is
corrected and a few regulators are renamed to align with schematics. The
Lenovo Thinkpad X13s gains camera activity LED and a set of previously
reserved GPIOs are released. The SA8540P Ride platform gains RTC
support.
For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced
and wired up as wakeup-parent of the TLMM.
On SDM845 the UFS controller gains interconnect path description,
power-domain information is added to GCC and minimum frequency of the
UFS ICE is corrected. On RB3 continuous splash memory region is
described, and the camera subsystem is enabled. On the Lenovo Yoga C630
a missing power supply for the display panel is added, and the debug
UART is introduced.
SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75
PMIC is described and added to the IDP.
GPU description is added to SM6115, and together with display enabled on
the Lenovo Tab P11.
On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU
is added, and the PDC is registered as wakeup-parent of TLMM.
L3 cache scaling is introduced on SM6375.
The DSI PHY compatible and an interrupt for I2C7 are corrected for
SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected.
On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node
gains interconnect paths, SMMU is marked as DMA coherent and dynamic
power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line
names are updated.
On SM8350 missing cluster sleep states and LMH interrupts are added,
the CPU compatibles are corrected and APR and LPASS pinctrl support is
introduced. The HDK gains uSD card support and PMK8350 is added.
For SM8450 support for RNG and RPMh stats are added, the ICE handling is
extracted from the UFS node and the display subsystem gains a missing
interconnect path. Thermal description is improved for the HDK.
On SM8550 MTP and QRD the pmic_glink is introduced, to provide
DisplayPort output. A missing regulator supply is also added.
A few platforms that happens to share the RPMH power-domain resource
identifier constants are migrated to new generic defines. ADC channel
names are generalized on various PMICs.
A variety of devices gain chassis-type, and the GIC_SPI constant is
replacing the 0 across a few different platforms.
-----BEGIN PGP SIGNATURE-----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=uK0C
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zUL1
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.6
Initial support for the SM4450 platform and the QRD device thereon is
added.
The IPQ5018 platform is introduced, and the RDP432-C2 board thereon.
A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based
LEDs and buttons.
On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added.
On MSM8916, the D3 camera mezzanine is improved and refactored out to
its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with
charger, while Samsung Galaxy J5 and E5 gains touchscreen support.
A few fixes for MSM8939 are introduced, and initial support for Samsung
Galaxy A7 is add.
Support for scaling the cache bus fabric is introduced on MSM8996. A
missing interrupt for the USB2 controller is added. The touchscreen vio
supply on Xiaomi Mi 5 is corrected, and a few other cleanups are
introduces across other devices.
The display controller is introduced for MSM8998, a few clock fixes are
introduced and missing power domains are added for the multimedia
subsystem iommu.
Reserved memory-regions and reserved GPIO lists are updated for the
QDU/QRU1000 IDPs.
USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is
enabled for the RB2.
PCIe and Ethernet support is introduced on SA8775P, and enabled for the
Ride board.
On SC7180 the PSCI integration is refactored, to allow supporting
devices with the Qualcomm firmware. BWMON is introduced, alongside the
CPUfreq-based bus voting.
A number of fixes are added for SC8180X, on the Primus and Lenovo Flex
5G devices pmic_glink is introduced and wired up, to provide support for
external display.
Missing SCM interconnect is added to SC8280XP, and the PDC is marked as
wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is
corrected and a few regulators are renamed to align with schematics. The
Lenovo Thinkpad X13s gains camera activity LED and a set of previously
reserved GPIOs are released. The SA8540P Ride platform gains RTC
support.
For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced
and wired up as wakeup-parent of the TLMM.
On SDM845 the UFS controller gains interconnect path description,
power-domain information is added to GCC and minimum frequency of the
UFS ICE is corrected. On RB3 continuous splash memory region is
described, and the camera subsystem is enabled. On the Lenovo Yoga C630
a missing power supply for the display panel is added, and the debug
UART is introduced.
SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75
PMIC is described and added to the IDP.
GPU description is added to SM6115, and together with display enabled on
the Lenovo Tab P11.
On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU
is added, and the PDC is registered as wakeup-parent of TLMM.
L3 cache scaling is introduced on SM6375.
The DSI PHY compatible and an interrupt for I2C7 are corrected for
SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected.
On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node
gains interconnect paths, SMMU is marked as DMA coherent and dynamic
power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line
names are updated.
On SM8350 missing cluster sleep states and LMH interrupts are added,
the CPU compatibles are corrected and APR and LPASS pinctrl support is
introduced. The HDK gains uSD card support and PMK8350 is added.
For SM8450 support for RNG and RPMh stats are added, the ICE handling is
extracted from the UFS node and the display subsystem gains a missing
interconnect path. Thermal description is improved for the HDK.
On SM8550 MTP and QRD the pmic_glink is introduced, to provide
DisplayPort output. A missing regulator supply is also added.
A few platforms that happens to share the RPMH power-domain resource
identifier constants are migrated to new generic defines. ADC channel
names are generalized on various PMICs.
A variety of devices gain chassis-type, and the GIC_SPI constant is
replacing the 0 across a few different platforms.
* tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (215 commits)
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
arm64: dts: qcom: msm8916-samsung-e5: Add touchscreen
arm64: dts: qcom: sc7180: Split up TF-A related PSCI configuration
arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED
arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins
arm64: dts: qcom: msm8998: Add DPU1 nodes
arm64: dts: qcom: msm8996: Fix dsi1 interrupts
arm64: dts: qcom: sdx75-idp: Add regulator nodes
arm64: dts: qcom: sdx75: Add rpmhpd node
arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
arm64: dts: qcom: Add pmx75 PMIC dtsi
arm64: dts: qcom: Add pm7550ba PMIC dtsi
arm64: dts: qcom: Add pinctrl gpio support for pm7250b
arm64: dts: qcom: sdx75: Add spmi node
arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU
...
Link: https://lore.kernel.org/r/20230819034551.2537866-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add bindings for the missing networking resets found in IPQ4019 GCC.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230814104119.96858-1-robert.marko@sartura.hr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Remove it entirely from the bindings, once Linux drivers stopped using
them.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The hardware don't have a SAI4 instance so remove the define. Use a
comment to keep it as reference and to avoid confusion.
Fixes: 1088691447 ("dt-bindings: imx: Add clock binding doc for i.MX8MP")
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20230731142150.3186650-2-m.felsch@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add the clock dt-binding file for Audio Clock Mux. which
is the IP for i.MX8QM, i.MX8QXP, i.MX8DXL.
Add the clockid for clocks in header file.
The Audio Clock Mux is binded with all the audio IP and audio clocks
in the subsystem, so need to list the power domain of related clocks
and IPs. Each clock and IP has a power domain, so there are so many
power domains.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1690260984-25744-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add the missing #define for GPLL0_SLEEP_CLK_SRC, the parent clock of
GPLL0_EARLY.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230802170317.205112-2-otto.pflueger@abscue.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for GCC_GPLL1_OUT_EVEN and GCC_DDRSS_ECPRI_GSI_CLK clock
bindings for QDU1000 and QRU1000 SoCs. While at it, update the
maintainers list.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-2-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GPLL0 has two separate outputs to both GPUSS and MMSS: one that's
2-divided and one that runs at the same rate as the GPLL0 itself.
Add the missing ones to the binding.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-1-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This patch adds support for the global clock controller found on
the IPQ5018 based devices.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/1690533192-22220-2-git-send-email-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add clock ID definitions for Intel Agilex5 SoCFPGA.
The registers in Agilex5 handling the clock is named as clock manager.
Signed-off-by: Teh Wen Ping <wen.ping.teh@intel.com>
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The header file for qcom,lcc-mdm9615 and qcom,lcc-msm8960 is the same
(as well as the drivers). Drop the qcom,lcc-mdm9615.h in favour of
qcom,lcc-msm8960.h
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add PDM IPG clk.
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230628061724.2056520-1-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add reset definitions of AST2600 I3C and MAC controllers. In the case of
the I3C reset, since there is no reset-line hardware available for
`ASPEED_RESET_I3C_DMA`, a new macro `ASPEED_RESET_I3C` with the same ID
is introduced to provide a more accurate representation of the hardware.
The old macro `ASPEED_RESET_I3C_DMA` is kept to provide backward
compatibility.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Link: https://lore.kernel.org/r/20230718062616.2822339-1-dylan_hung@aspeedtech.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add bindings for the Video-Output clock and reset generator (VOUTCRG)
on the JH7110 RISC-V SoC by StarFive Ltd.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add bindings for the Image-Signal-Process clock and reset
generator (ISPCRG) on the JH7110 RISC-V SoC by StarFive Ltd.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add bindings for the System-Top-Group clock and reset generator (STGCRG)
on the JH7110 RISC-V SoC by StarFive Ltd.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.
Fixes: a66a82f2a5 ("dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the clocks needed for enabling USB in IPQ9574
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/d1c5aa4a8535c645fdb06df62a562918516ba0c6.1686289721.git.quic_varada@quicinc.com
[bjorn: Split from driver patch, to allow merging into dts tree]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
