Add a small amount of emulation to vfio_compat to accept the SET_IOMMU to
VFIO_NOIOMMU_IOMMU and have vfio just ignore iommufd if it is working on a
no-iommu enabled device.
Move the enable_unsafe_noiommu_mode module out of container.c into
vfio_main.c so that it is always available even if VFIO_CONTAINER=n.
This passes Alex's mini-test:
https://github.com/awilliam/tests/blob/master/vfio-noiommu-pci-device-open.c
Link: https://lore.kernel.org/r/0-v3-480cd64a16f7+1ad0-iommufd_noiommu_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If reset requirement was relaxed via module parameter, errors caused by
missing reset should not be propagated down to the vfio core.
Otherwise initialization will fail.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Fixes: 5f6c7e0831 ("vfio/platform: Use the new device life cycle helpers")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20230131083349.2027189-1-tduszynski@marvell.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Improve the target side flow to reduce downtime as of below.
- Support reading an optional record which includes the expected
stop_copy size.
- Once the source sends this record data, which expects to be sent as
part of the pre_copy flow, prepare the data buffers that may be large
enough to hold the final stop_copy data.
The above reduces the migration downtime as the relevant stuff that is
needed to load the image data is prepared ahead as part of pre_copy.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20230124144955.139901-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Improve the source side flow upon pre_copy as of below.
- Prepare the stop_copy buffers as part of moving to pre_copy.
- Send to the target a record that includes the expected
stop_copy size to let it optimize its stop_copy flow as well.
As for sending the target this new record type (i.e.
MLX5_MIGF_HEADER_TAG_STOP_COPY_SIZE) we split the current 64 header
flags bits into 32 flags bits and another 32 tag bits, each record may
have a tag and a flag whether it's optional or mandatory. Optional
records will be ignored in the target.
The above reduces the downtime upon stop_copy as the relevant data stuff
is prepared ahead as part of pre_copy.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20230124144955.139901-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add a check whether VF is migratable. Only if VF is migratable, mark the
VFIO device as migration capable.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20230124144955.139901-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230129084117.2384-1-liubo03@inspur.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Jason Gunthorpe says:
====================
iommufd follows the same design as KVM and uses memory cgroups to limit
the amount of kernel memory a iommufd file descriptor can pin down. The
various internal data structures already use GFP_KERNEL_ACCOUNT to charge
its own memory.
However, one of the biggest consumers of kernel memory is the IOPTEs
stored under the iommu_domain and these allocations are not tracked.
This series is the first step in fixing it.
The iommu driver contract already includes a 'gfp' argument to the
map_pages op, allowing iommufd to specify GFP_KERNEL_ACCOUNT and then
having the driver allocate the IOPTE tables with that flag will capture a
significant amount of the allocations.
Update the iommu_map() API to pass in the GFP argument, and fix all call
sites. Replace iommu_map_atomic().
Audit the "enterprise" iommu drivers to make sure they do the right thing.
Intel and S390 ignore the GFP argument and always use GFP_ATOMIC. This is
problematic for iommufd anyhow, so fix it. AMD and ARM SMMUv2/3 are
already correct.
A follow up series will be needed to capture the allocations made when the
iommu_domain itself is allocated, which will complete the job.
====================
* 'iommu-memory-accounting' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/s390: Use GFP_KERNEL in sleepable contexts
iommu/s390: Push the gfp parameter to the kmem_cache_alloc()'s
iommu/intel: Use GFP_KERNEL in sleepable contexts
iommu/intel: Support the gfp argument to the map_pages op
iommu/intel: Add a gfp parameter to alloc_pgtable_page()
iommufd: Use GFP_KERNEL_ACCOUNT for iommu_map()
iommu/dma: Use the gfp parameter in __iommu_dma_alloc_noncontiguous()
iommu: Add a gfp parameter to iommu_map_sg()
iommu: Remove iommu_map_atomic()
iommu: Add a gfp parameter to iommu_map()
Link: https://lore.kernel.org/linux-iommu/0-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The internal mechanisms support this, but instead of exposting the gfp to
the caller it wrappers it into iommu_map() and iommu_map_atomic()
Fix this instead of adding more variants for GFP_KERNEL_ACCOUNT.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/1-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use GFP_KERNEL_ACCOUNT for userspace persistent allocations.
The GFP_KERNEL_ACCOUNT option lets the memory allocator know that this
is untrusted allocation triggered from userspace and should be a subject
of kmem accounting, and as such it is controlled by the cgroup
mechanism.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230108154427.32609-7-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use GFP_KERNEL_ACCOUNT for userspace persistent allocations.
The GFP_KERNEL_ACCOUNT option lets the memory allocator know that this
is untrusted allocation triggered from userspace and should be a subject
of kmem accounting, and as such it is controlled by the cgroup
mechanism.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230108154427.32609-6-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use GFP_KERNEL_ACCOUNT for userspace persistent allocations.
The GFP_KERNEL_ACCOUNT option lets the memory allocator know that this
is untrusted allocation triggered from userspace and should be a subject
of kmem accounting, and as such it is controlled by the cgroup
mechanism.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230108154427.32609-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use GFP_KERNEL_ACCOUNT for userspace persistent allocations.
The GFP_KERNEL_ACCOUNT option lets the memory allocator know that this
is untrusted allocation triggered from userspace and should be a subject
of kmem accounting, and as such it is controlled by the cgroup
mechanism.
The way to find the relevant allocations was for example to look at the
close_device function and trace back all the kfrees to their
allocations.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230108154427.32609-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Allow loading of larger images than 512 MB by dropping the arbitrary
hard-coded value that we have today and move to use the max device
loading value which is for now 4GB.
As part of that we move to use the GFP_KERNEL_ACCOUNT option upon
allocating the persistent data of mlx5 and rely on the cgroup to provide
the memory limit for the given user.
The GFP_KERNEL_ACCOUNT option lets the memory allocator know that this
is untrusted allocation triggered from userspace and should be a subject
of kmem accounting, and as such it is controlled by the cgroup
mechanism.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230108154427.32609-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Prevent calling roundup_pow_of_two() with value of 0 as it causes the
below UBSAN note.
Move this code and its few extra related lines to be called only when
it's really applicable.
UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 15 PID: 1639 Comm: live_migration Not tainted 6.1.0-rc4 #1116
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
ubsan_epilogue+0x5/0x36
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xef
? lock_is_held_type+0x98/0x110
? rcu_read_lock_sched_held+0x3f/0x70
mlx5vf_create_rc_qp.cold+0xe4/0xf2 [mlx5_vfio_pci]
mlx5vf_start_page_tracker+0x769/0xcd0 [mlx5_vfio_pci]
vfio_device_fops_unl_ioctl+0x63f/0x700 [vfio]
__x64_sys_ioctl+0x433/0x9a0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fixes: 79c3cf2799 ("vfio/mlx5: Init QP based resources for dirty tracking")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230108154427.32609-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIO_MDEV is just a library with helpers for the drivers. Stop making
it a user choice and just select it by the drivers that use the helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/20230110091009.474427-3-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In function vfio_platform_regions_init(),we did check res implied
by using while loop,
so no need to check whether res be null or not again.
No functional change intended.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20230107034721.2127-1-angus.chen@jaguarmicro.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Trivially use the new API.
Link: https://lore.kernel.org/r/3-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since commit cbf7827bc5 ("iommu/s390: Fix potential s390_domain
aperture shrinking") the s390 IOMMU driver uses reserved regions for the
system provided DMA ranges of PCI devices. Previously it reduced the
size of the IOMMU aperture and checked it on each mapping operation.
On current machines the system denies use of DMA addresses below 2^32 for
all PCI devices.
Usually mapping IOVAs in a reserved regions is harmless until a DMA
actually tries to utilize the mapping. However on s390 there is
a virtual PCI device called ISM which is implemented in firmware and
used for cross LPAR communication. Unlike real PCI devices this device
does not use the hardware IOMMU but inspects IOMMU translation tables
directly on IOTLB flush (s390 RPCIT instruction). If it detects IOVA
mappings outside the allowed ranges it goes into an error state. This
error state then causes the device to be unavailable to the KVM guest.
Analysing this we found that vfio_test_domain_fgsp() maps 2 pages at DMA
address 0 irrespective of the IOMMUs reserved regions. Even if usually
harmless this seems wrong in the general case so instead go through the
freshly updated IOVA list and try to find a range that isn't reserved,
and fits 2 pages, is PAGE_SIZE * 2 aligned. If found use that for
testing for fine grained super pages.
Fixes: af029169b8 ("vfio/type1: Check reserved region conflict and update iova list")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230110164427.4051938-2-schnelle@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
- Replace deprecated git://github.com link in MAINTAINERS. (Palmer Dabbelt)
- Simplify vfio/mlx5 with module_pci_driver() helper. (Shang XiaoJing)
- Drop unnecessary buffer from ACPI call. (Rafael Mendonca)
- Correct latent missing include issue in iova-bitmap and fix support
for unaligned bitmaps. Follow-up with better fix through refactor.
(Joao Martins)
- Rework ccw mdev driver to split private data from parent structure,
better aligning with the mdev lifecycle and allowing us to remove
a temporary workaround. (Eric Farman)
- Add an interface to get an estimated migration data size for a device,
allowing userspace to make informed decisions, ex. more accurately
predicting VM downtime. (Yishai Hadas)
- Fix minor typo in vfio/mlx5 array declaration. (Yishai Hadas)
- Simplify module and Kconfig through consolidating SPAPR/EEH code and
config options and folding virqfd module into main vfio module.
(Jason Gunthorpe)
- Fix error path from device_register() across all vfio mdev and sample
drivers. (Alex Williamson)
- Define migration pre-copy interface and implement for vfio/mlx5
devices, allowing portions of the device state to be saved while the
device continues operation, towards reducing the stop-copy state
size. (Jason Gunthorpe, Yishai Hadas, Shay Drory)
- Implement pre-copy for hisi_acc devices. (Shameer Kolothum)
- Fixes to mdpy mdev driver remove path and error path on probe.
(Shang XiaoJing)
- vfio/mlx5 fixes for incorrect return after copy_to_user() fault and
incorrect buffer freeing. (Dan Carpenter)
-----BEGIN PGP SIGNATURE-----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=q9xs
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Replace deprecated git://github.com link in MAINTAINERS (Palmer
Dabbelt)
- Simplify vfio/mlx5 with module_pci_driver() helper (Shang XiaoJing)
- Drop unnecessary buffer from ACPI call (Rafael Mendonca)
- Correct latent missing include issue in iova-bitmap and fix support
for unaligned bitmaps. Follow-up with better fix through refactor
(Joao Martins)
- Rework ccw mdev driver to split private data from parent structure,
better aligning with the mdev lifecycle and allowing us to remove a
temporary workaround (Eric Farman)
- Add an interface to get an estimated migration data size for a
device, allowing userspace to make informed decisions, ex. more
accurately predicting VM downtime (Yishai Hadas)
- Fix minor typo in vfio/mlx5 array declaration (Yishai Hadas)
- Simplify module and Kconfig through consolidating SPAPR/EEH code and
config options and folding virqfd module into main vfio module (Jason
Gunthorpe)
- Fix error path from device_register() across all vfio mdev and sample
drivers (Alex Williamson)
- Define migration pre-copy interface and implement for vfio/mlx5
devices, allowing portions of the device state to be saved while the
device continues operation, towards reducing the stop-copy state size
(Jason Gunthorpe, Yishai Hadas, Shay Drory)
- Implement pre-copy for hisi_acc devices (Shameer Kolothum)
- Fixes to mdpy mdev driver remove path and error path on probe (Shang
XiaoJing)
- vfio/mlx5 fixes for incorrect return after copy_to_user() fault and
incorrect buffer freeing (Dan Carpenter)
* tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio: (42 commits)
vfio/mlx5: error pointer dereference in error handling
vfio/mlx5: fix error code in mlx5vf_precopy_ioctl()
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
hisi_acc_vfio_pci: Enable PRE_COPY flag
hisi_acc_vfio_pci: Move the dev compatibility tests for early check
hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions
hisi_acc_vfio_pci: Add support for precopy IOCTL
vfio/mlx5: Enable MIGRATION_PRE_COPY flag
vfio/mlx5: Fallback to STOP_COPY upon specific PRE_COPY error
vfio/mlx5: Introduce multiple loads
vfio/mlx5: Consider temporary end of stream as part of PRE_COPY
vfio/mlx5: Introduce vfio precopy ioctl implementation
vfio/mlx5: Introduce SW headers for migration states
vfio/mlx5: Introduce device transitions of PRE_COPY
vfio/mlx5: Refactor to use queue based data chunks
vfio/mlx5: Refactor migration file state
vfio/mlx5: Refactor MKEY usage
vfio/mlx5: Refactor PD usage
vfio/mlx5: Enforce a single SAVE command at a time
vfio: Extend the device migration protocol with PRE_COPY
...
iommufd is the user API to control the IOMMU subsystem as it relates to
managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU device
specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance the
combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a
guest. Dirty tracking enables VM live migration with SRIOV devices and
PASID support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs, which
is currently VFIO and VDPA.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY5ct7wAKCRCFwuHvBreF
YZZ5AQDciXfcgXLt0UBEmWupNb0f/asT6tk717pdsKm8kAZMNAEAsIyLiKT5HqGl
s7fAu+CQ1pr9+9NKGevD+frw8Solsw4=
=jJkd
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd implementation from Jason Gunthorpe:
"iommufd is the user API to control the IOMMU subsystem as it relates
to managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU
device specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance
the combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a guest.
Dirty tracking enables VM live migration with SRIOV devices and PASID
support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs,
which is currently VFIO and VDPA"
For more background, see the extended explanations in Jason's pull request:
https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits)
iommufd: Change the order of MSI setup
iommufd: Improve a few unclear bits of code
iommufd: Fix comment typos
vfio: Move vfio group specific code into group.c
vfio: Refactor dma APIs for emulated devices
vfio: Wrap vfio group module init/clean code into helpers
vfio: Refactor vfio_device open and close
vfio: Make vfio_device_open() truly device specific
vfio: Swap order of vfio_device_container_register() and open_device()
vfio: Set device->group in helper function
vfio: Create wrappers for group register/unregister
vfio: Move the sanity check of the group to vfio_create_group()
vfio: Simplify vfio_create_group()
iommufd: Allow iommufd to supply /dev/vfio/vfio
vfio: Make vfio_container optionally compiled
vfio: Move container related MODULE_ALIAS statements into container.c
vfio-iommufd: Support iommufd for emulated VFIO devices
vfio-iommufd: Support iommufd for physical VFIO devices
vfio-iommufd: Allow iommufd to be used in place of a container fd
vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent()
...
This code frees the wrong "buf" variable and results in an error pointer
dereference.
Fixes: 34e2f27143 ("vfio/mlx5: Introduce multiple loads")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/Y5IKia5SaiVxYmG5@kili
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The copy_to_user() function returns the number of bytes remaining to
be copied but we want to return a negative error code here.
Fixes: 0dce165b1a ("vfio/mlx5: Introduce vfio precopy ioctl implementation")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/Y5IKVknlf5Z5NPtU@kili
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
Instead of waiting till data transfer is complete to perform dev
compatibility, do it as soon as we have enough data to perform the
check. This will be useful when we enable the support for PRE_COPY.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20221123113236.896-4-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The saving_migf is open in PRE_COPY state if it is supported and reads
initial device match data. hisi_acc_vf_stop_copy() is refactored to
make use of common code.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20221123113236.896-3-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
PRECOPY IOCTL in the case of HiSiIicon ACC driver can be used to
perform the device compatibility check earlier during migration.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20221123113236.896-2-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that everything has been set up for MIGRATION_PRE_COPY, enable it.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-15-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Before a SAVE command is issued, a QUERY command is issued in order to
know the device data size.
In case PRE_COPY is used, the above commands are issued while the device
is running. Thus, it is possible that between the QUERY and the SAVE
commands the state of the device will be changed significantly and thus
the SAVE will fail.
Currently, if a SAVE command is failing, the driver will fail the
migration. In the above case, don't fail the migration, but don't allow
for new SAVEs to be executed while the device is in a RUNNING state.
Once the device will be moved to STOP_COPY, SAVE can be executed again
and the full device state will be read.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-14-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In order to support PRE_COPY, mlx5 driver transfers multiple states
(images) of the device. e.g.: the source VF can save and transfer
multiple states, and the target VF will load them by that order.
This patch implements the changes for the target VF to decompose the
header for each state and to write and load multiple states.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-13-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
During PRE_COPY the migration data FD may have a temporary "end of
stream" that is reached when the initial_bytes were read and no other
dirty data exists yet.
For instance, this may indicate that the device is idle and not
currently dirtying any internal state. When read() is done on this
temporary end of stream the kernel driver should return ENOMSG from
read(). Userspace can wait for more data or consider moving to
STOP_COPY.
To not block the user upon read() and let it get ENOMSG we add a new
state named MLX5_MIGF_STATE_PRE_COPY on the migration file.
In addition, we add the MLX5_MIGF_STATE_SAVE_LAST state to block the
read() once we call the last SAVE upon moving to STOP_COPY.
Any further error will be marked with MLX5_MIGF_STATE_ERROR and the user
won't be blocked.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-12-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio precopy ioctl returns an estimation of data available for
transferring from the device.
Whenever a user is using VFIO_MIG_GET_PRECOPY_INFO, track the current
state of the device, and if needed, append the dirty data to the
transfer FD data. This is done by saving a middle state.
As mlx5 runs the SAVE command asynchronously, make sure to query for
incremental data only once there is no active save command.
Running both in parallel, might end-up with a failure in the incremental
query command on un-tracked vhca.
Also, a middle state will be saved only after the previous state has
finished its SAVE command and has been fully transferred, this prevents
endless use resources.
Co-developed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-11-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As mentioned in the previous patches, mlx5 is transferring multiple
states when the PRE_COPY protocol is used. This states mechanism
requires the target VM to know the states' size in order to execute
multiple loads. Therefore, add SW header, with the needed information,
for each saved state the source VM is transferring to the target VM.
This patch implements the source VM handling of the headers, following
patch will implement the target VM handling of the headers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-10-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In order to support PRE_COPY, mlx5 driver is transferring multiple
states (images) of the device. e.g.: the source VF can save and transfer
multiple states, and the target VF will load them by that order.
The device is saving three kinds of states:
1) Initial state - when the device moves to PRE_COPY state.
2) Middle state - during PRE_COPY phase via VFIO_MIG_GET_PRECOPY_INFO.
There can be multiple states of this type.
3) Final state - when the device moves to STOP_COPY state.
After moving to PRE_COPY state, user is holding the saving migf FD and
can use it. For example: user can start transferring data via read()
callback. Also, user can switch from PRE_COPY to STOP_COPY whenever he
sees it fits. This will invoke saving of final state.
This means that mlx5 VFIO device can be switched to STOP_COPY without
transferring any data in PRE_COPY state. Therefore, when the device
moves to STOP_COPY, mlx5 will store the final state on a dedicated queue
entry on the list.
Co-developed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-9-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Refactor to use queue based data chunks on the migration file.
The SAVE command adds a chunk to the tail of the queue while the read()
API finds the required chunk and returns its data.
In case the queue is empty but the state of the migration file is
MLX5_MIGF_STATE_COMPLETE, read() may not be blocked but will return 0 to
indicate end of file.
This is a step towards maintaining multiple images and their meta data
(i.e. headers) on the migration file as part of next patches from the
series.
Note:
At that point, we still use a single chunk on the migration file but
becomes ready to support multiple.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-8-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Refactor migration file state to be an emum which is mutual exclusive.
As of that dropped the 'disabled' state as 'error' is the same from
functional point of view.
Next patches from the series will extend this enum for other relevant
states.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-7-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch refactors MKEY usage such as its life cycle will be as of the
migration file instead of allocating/destroying it upon each
SAVE/LOAD command.
This is a preparation step towards the PRE_COPY series where multiple
images will be SAVED/LOADED.
We achieve it by having a new struct named mlx5_vhca_data_buffer which
holds the mkey and its related stuff as of sg_append_table,
allocated_length, etc.
The above fields were taken out from the migration file main struct,
into mlx5_vhca_data_buffer dedicated struct with the proper helpers in
place.
For now we have a single mlx5_vhca_data_buffer per migration file.
However, in coming patches we'll have multiple of them to support
multiple images.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-6-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch refactors PD usage such as its life cycle will be as of the
migration file instead of allocating/destroying it upon each SAVE/LOAD
command.
This is a preparation step towards the PRE_COPY series where multiple
images will be SAVED/LOADED and a single PD can be simply reused.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Enforce a single SAVE command at a time.
As the SAVE command is an asynchronous one, we must enforce running only
a single command at a time.
This will preserve ordering between multiple calls and protect from
races on the migration file data structure.
This is a must for the next patches from the series where as part of
PRE_COPY we may have multiple images to be saved and multiple SAVE
commands may be issued from different flows.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The optional PRE_COPY states open the saving data transfer FD before
reaching STOP_COPY and allows the device to dirty track internal state
changes with the general idea to reduce the volume of data transferred
in the STOP_COPY stage.
While in PRE_COPY the device remains RUNNING, but the saving FD is open.
Only if the device also supports RUNNING_P2P can it support PRE_COPY_P2P,
which halts P2P transfers while continuing the saving FD.
PRE_COPY, with P2P support, requires the driver to implement 7 new arcs
and exists as an optional FSM branch between RUNNING and STOP_COPY:
RUNNING -> PRE_COPY -> PRE_COPY_P2P -> STOP_COPY
A new ioctl VFIO_MIG_GET_PRECOPY_INFO is provided to allow userspace to
query the progress of the precopy operation in the driver with the idea it
will judge to move to STOP_COPY at least once the initial data set is
transferred, and possibly after the dirty size has shrunk appropriately.
This ioctl is valid only in PRE_COPY states and kernel driver should
return -EINVAL from any other migration state.
Compared to the v1 clarification, STOP_COPY -> PRE_COPY is blocked
and to be defined in future.
We also split the pending_bytes report into the initial and sustaining
values, e.g.: initial_bytes and dirty_bytes.
initial_bytes: Amount of initial precopy data.
dirty_bytes: Device state changes relative to data previously retrieved.
These fields are not required to have any bearing to STOP_COPY phase.
It is recommended to leave PRE_COPY for STOP_COPY only after the
initial_bytes field reaches zero. Leaving PRE_COPY earlier might make
things slower.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is only 1.8k, putting it in its own module is not really
necessary. The kconfig infrastructure is still there to completely remove
it for systems that are trying for small footprint.
Put it in the main vfio.ko module now that kbuild can support multiple .c
files.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/5-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We don't need a kconfig symbol for this, just directly test CONFIG_EEH in
the few places that need it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As with the previous patch EEH is always enabled if SPAPR_TCE_IOMMU, so
move this last bit of code into the main module.
Now that this function only processes VFIO_EEH_PE_OP remove a level of
indenting as well, it is only called by a case statement that already
checked VFIO_EEH_PE_OP.
This eliminates an unnecessary module and SPAPR code in a global header.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The PPC64 kconfig is a bit of a rats nest, but it turns out that if
CONFIG_SPAPR_TCE_IOMMU is on then EEH must be too:
config SPAPR_TCE_IOMMU
bool "sPAPR TCE IOMMU Support"
depends on PPC_POWERNV || PPC_PSERIES
select IOMMU_API
help
Enables bits of IOMMU API required by VFIO. The iommu_ops
is not implemented as it is not necessary for VFIO.
config PPC_POWERNV
select FORCE_PCI
config PPC_PSERIES
select FORCE_PCI
config EEH
bool
depends on (PPC_POWERNV || PPC_PSERIES) && PCI
default y
So, just open code the call to eeh_enabled() into tce_iommu_ioctl().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_spapr_pci_eeh_open/release() functions are one line wrappers
around an arch function. Just call them directly. This eliminates some
weird exported symbols that don't need to exist.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/1-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This prepares for compiling out vfio group after vfio device cdev is
added. No vfio_group decode code should be in vfio_main.c, and neither
device->group reference should be in vfio_main.c.
No functional change is intended.
Link: https://lore.kernel.org/r/20221201145535.589687-11-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Yu He <yu.he@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
To use group helpers instead of opening group related code in the
API. This prepares moving group specific code out of vfio_main.c.
Link: https://lore.kernel.org/r/20221201145535.589687-10-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This wraps the init/clean code of vfio group global variable to be
helpers, and prepares for further moving vfio group specific code into
separate file.
As container is used by group, so vfio_container_init/cleanup() is moved
into vfio_group_init/cleanup().
Link: https://lore.kernel.org/r/20221201145535.589687-9-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This refactor makes the vfio_device_open() to accept device, iommufd_ctx
pointer and kvm pointer. These parameters are generic items in today's
group path and future device cdev path. Caller of vfio_device_open()
should take care the necessary protections. e.g. the current group path
need to hold the group_lock to ensure the iommufd_ctx and kvm pointer are
valid.
This refactor also wraps the group spefcific codes in the device open and
close paths to be paired helpers like:
- vfio_device_group_open/close(): call vfio_device_open/close()
- vfio_device_group_use/unuse_iommu(): this pair is container specific.
iommufd vs. container is selected
in vfio_device_first_open().
Such helpers are supposed to be moved to group.c. While iommufd related
codes will be kept in the generic helpers since future device cdev path
also need to handle iommufd.
Link: https://lore.kernel.org/r/20221201145535.589687-8-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Then move group related logic into vfio_device_open_file(). Accordingly
introduce a vfio_device_close() to pair up.
Link: https://lore.kernel.org/r/20221201145535.589687-7-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This makes the DMA unmap callback registration to container be consistent
across the vfio iommufd compat mode and the legacy container mode.
In the vfio iommufd compat mode, this registration is done in the
vfio_iommufd_bind() when creating access which has an unmap callback. This
is prior to calling the open_device() op. The existing mdev drivers have
been converted to be OK with this order. So it is ok to swap the order of
vfio_device_container_register() and open_device() for legacy mode.
This also prepares for further moving group specific code into separate
source file.
Link: https://lore.kernel.org/r/20221201145535.589687-6-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This avoids referencing device->group in __vfio_register_dev().
Link: https://lore.kernel.org/r/20221201145535.589687-5-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This avoids decoding group fields in the common functions used by
vfio_device registration, and prepares for further moving the vfio group
specific code into separate file.
Link: https://lore.kernel.org/r/20221201145535.589687-4-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This avoids opening group specific code in __vfio_register_dev() for the
sanity check if an (existing) group is not corrupted by having two copies
of the same struct device in it. It also simplifies the error unwind for
this sanity check since the failure can be detected in the group
allocation.
This also prepares for moving the group specific code into separate
group.c.
Grabbed from:
https://lore.kernel.org/kvm/20220922152338.2a2238fe.alex.williamson@redhat.com/
Link: https://lore.kernel.org/r/20221201145535.589687-3-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
The vfio.group_lock is now only used to serialize vfio_group creation and
destruction, we don't need a micro-optimization of searching, unlocking,
then allocating and searching again. Just hold the lock the whole time.
Grabbed from:
https://lore.kernel.org/kvm/20220922152338.2a2238fe.alex.williamson@redhat.com/
Link: https://lore.kernel.org/r/20221201145535.589687-2-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Commit f38044e5ef ("vfio/iova_bitmap: Fix PAGE_SIZE unaligned bitmaps")
had fixed the unaligned bitmaps by capping the remaining iterable set at
the start of the bitmap. Although, that mistakenly worked around
iova_bitmap_set() incorrectly setting bits across page boundary.
Fix this by reworking the loop inside iova_bitmap_set() to iterate over a
range of bits to set (cur_bit .. last_bit) which may span different pinned
pages, thus updating @page_idx and @offset as it sets the bits. The
previous cap to the first page is now adjusted to be always accounted
rather than when there's only a non-zero pgoff.
While at it, make @page_idx , @offset and @nbits to be unsigned int given
that it won't be more than 512 and 4096 respectively (even a bigger
PAGE_SIZE or a smaller struct page size won't make this bigger than the
above 32-bit max). Also, delete the stale kdoc on Return type.
Cc: Avihai Horon <avihaih@nvidia.com>
Fixes: f38044e5ef ("vfio/iova_bitmap: Fix PAGE_SIZE unaligned bitmaps")
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20221129131235.38880-1-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version.
The rc fix was done a different way when iommufd patches reworked this
code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a kconfig CONFIG_VFIO_CONTAINER that controls compiling the container
code. If 'n' then only iommufd will provide the container service. All the
support for vfio iommu drivers, including type1, will not be built.
This allows a compilation check that no inappropriate dependencies between
the device/group and container have been created.
Link: https://lore.kernel.org/r/9-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The miscdev is in container.c, so should these related MODULE_ALIAS
statements. This is necessary for the next patch to be able to fully
disable /dev/vfio/vfio.
Fixes: cdc71fe4ec ("vfio: Move container code into drivers/vfio/container.c")
Link: https://lore.kernel.org/r/8-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Reported-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Emulated VFIO devices are calling vfio_register_emulated_iommu_dev() and
consist of all the mdev drivers.
Like the physical drivers, support for iommufd is provided by the driver
supplying the correct standard ops. Provide ops from the core that
duplicate what vfio_register_emulated_iommu_dev() does.
Emulated drivers are where it is more likely to see variation in the
iommfd support ops. For instance IDXD will probably need to setup both a
iommfd_device context linked to a PASID and an iommufd_access context to
support all their mdev operations.
Link: https://lore.kernel.org/r/7-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This creates the iommufd_device for the physical VFIO drivers. These are
all the drivers that are calling vfio_register_group_dev() and expect the
type1 code to setup a real iommu_domain against their parent struct
device.
The design gives the driver a choice in how it gets connected to iommufd
by providing bind_iommufd/unbind_iommufd/attach_ioas callbacks to
implement as required. The core code provides three default callbacks for
physical mode using a real iommu_domain. This is suitable for drivers
using vfio_register_group_dev()
Link: https://lore.kernel.org/r/6-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This makes VFIO_GROUP_SET_CONTAINER accept both a vfio container FD and an
iommufd.
In iommufd mode an IOAS will exist after the SET_CONTAINER, but it will
not be attached to any groups.
For VFIO this means that the VFIO_GROUP_GET_STATUS and
VFIO_GROUP_FLAGS_VIABLE works subtly differently. With the container FD
the iommu_group_claim_dma_owner() is done during SET_CONTAINER but for
IOMMUFD this is done during VFIO_GROUP_GET_DEVICE_FD. Meaning that
VFIO_GROUP_FLAGS_VIABLE could be set but GET_DEVICE_FD will fail due to
viability.
As GET_DEVICE_FD can fail for many reasons already this is not expected to
be a meaningful difference.
Reorganize the tests for if the group has an assigned container or iommu
into a vfio_group_has_iommu() function and consolidate all the duplicated
WARN_ON's etc related to this.
Call container functions only if a container is actually present on the
group.
Link: https://lore.kernel.org/r/5-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd doesn't establish the iommu_domains until after the device FD is
opened, even if the container has been set. This design is part of moving
away from the group centric iommu APIs.
This is fine, except that the normal sequence of establishing the kvm
wbinvd won't work:
group = open("/dev/vfio/XX")
ioctl(group, VFIO_GROUP_SET_CONTAINER)
ioctl(kvm, KVM_DEV_VFIO_GROUP_ADD)
ioctl(group, VFIO_GROUP_GET_DEVICE_FD)
As the domains don't start existing until GET_DEVICE_FD. Further,
GET_DEVICE_FD requires that KVM_DEV_VFIO_GROUP_ADD already be done as that
is what sets the group->kvm and thus device->kvm for the driver to use
during open.
Now that we have device centric cap ops and the new
IOMMU_CAP_ENFORCE_CACHE_COHERENCY we know what the iommu_domain will be
capable of without having to create it. Use this to compute
vfio_file_enforced_coherent() and resolve the ordering problems.
VFIO always tries to upgrade domains to enforce cache coherency, it never
attaches a device that supports enforce cache coherency to a less capable
domain, so the cap test is a sufficient proxy for the ultimate
outcome. iommufd also ensures that devices that set the cap will be
connected to enforcing domains.
Link: https://lore.kernel.org/r/4-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These functions don't really assign anything anymore, they just increment
some refcounts and do a sanity check. Call them
vfio_group_[un]use_container()
Link: https://lore.kernel.org/r/3-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The only thing this function does is assert the group has an assigned
container and incrs refcounts.
The overall model we have is that once a container_users refcount is
incremented it cannot be de-assigned from the group -
vfio_group_ioctl_unset_container() will fail and the group FD cannot be
closed.
Thus we do not need to check this on every device FD open, just the
first. Reorganize the code so that only the first open and last close
manages the container.
Link: https://lore.kernel.org/r/2-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This error unwind is getting complicated. Move all the code into two
pair'd function. The functions should be called when the open_count == 1
after incrementing/before decrementing.
Link: https://lore.kernel.org/r/1-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The devnode() in struct class should not be modifying the device that is
passed into it, so mark it as a const * and propagate the function
signature changes out into all relevant subsystems that use this
callback.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Justin Sanders <justin@coraid.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: John Stultz <jstultz@google.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sean Young <sean@mess.org>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Xie Yongji <xieyongji@bytedance.com>
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Eli Cohen <elic@nvidia.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: alsa-devel@alsa-project.org
Cc: dri-devel@lists.freedesktop.org
Cc: kvm@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-block@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20221123122523.1332370-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nothing in this file needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20221113202428.826924043@linutronix.de
Fix a typo in mlx5vf_cmd_load_vhca_state() to use the 'load' memory
layout.
As in/out sizes are equal for save and load commands there wasn't any
functional issue.
Fixes: f1d98f346e ("vfio/mlx5: Expose migration commands over mlx5 device")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221106174630.25909-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add an option to get migration data size by introducing a new migration
feature named VFIO_DEVICE_FEATURE_MIG_DATA_SIZE.
Upon VFIO_DEVICE_FEATURE_GET the estimated data length that will be
required to complete STOP_COPY is returned.
This option may better enable user space to consider before moving to
STOP_COPY whether it can meet the downtime SLA based on the returned
data.
The patch also includes the implementation for mlx5 and hisi for this
new option to make it feature complete for the existing drivers in this
area.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20221106174630.25909-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_pci_dev_set_needs_reset() inspects the open_count of every device
in the set to determine whether a reset is allowed. The current device
always has open_count == 1 within vfio_pci_core_disable(), effectively
disabling the reset logic. This field is also documented as private in
vfio_device, so it should not be used to determine whether other devices
in the set are open.
Checking for vfio_device_set_open_count() > 1 on the device set fixes
both issues.
After commit 2cd8b14aaa ("vfio/pci: Move to the device set
infrastructure"), failure to create a new file for a device would cause
the reset to be skipped due to open_count being decremented after
calling close_device() in the error path.
After commit eadd86f835 ("vfio: Remove calls to
vfio_group_add_container_user()"), releasing a device would always skip
the reset due to an ordering change in vfio_device_fops_release().
Failing to reset the device leaves it in an unknown state, potentially
causing errors when it is accessed later or bound to a different driver.
This issue was observed with a Radeon RX Vega 56 [1002:687f] (rev c3)
assigned to a Windows guest. After shutting down the guest, unbinding
the device from vfio-pci, and binding the device to amdgpu:
[ 548.007102] [drm:psp_hw_start [amdgpu]] *ERROR* PSP create ring failed!
[ 548.027174] [drm:psp_hw_init [amdgpu]] *ERROR* PSP firmware loading failed
[ 548.027242] [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* hw_init of IP block <psp> failed -22
[ 548.027306] amdgpu 0000:0a:00.0: amdgpu: amdgpu_device_ip_init failed
[ 548.027308] amdgpu 0000:0a:00.0: amdgpu: Fatal error during GPU init
Fixes: 2cd8b14aaa ("vfio/pci: Move to the device set infrastructure")
Fixes: eadd86f835 ("vfio: Remove calls to vfio_group_add_container_user()")
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221110014027.28780-4-ajderossi@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The open count of a device set is the sum of the open counts of all
devices in the set. Drivers can use this value to determine whether
shared resources are in use without tracking them manually or accessing
the private open_count in vfio_device.
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20221110014027.28780-3-ajderossi@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In vfio_device_open(), vfio_device_container_register() is always called
when open_count == 1. On error, vfio_device_container_unregister() is
only called when open_count == 1 and close_device is set. This leaks a
registration for devices without a close_device implementation.
In vfio_device_fops_release(), vfio_device_container_unregister() is
called unconditionally. This can cause a device to be unregistered
multiple times.
Treating container device registration/unregistration uniformly (always
when open_count == 1) fixes both issues.
Fixes: ce4b4657ff ("vfio: Replace the DMA unmapping notifier with a callback")
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20221110014027.28780-2-ajderossi@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
With the "mess" sorted out, we should be able to inline the
vfio_free_device call introduced by commit cb9ff3f3b8
("vfio: Add helpers for unifying vfio_device life cycle")
and remove them from driver release callbacks.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> # vfio-ap part
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-8-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that we have a reasonable separation of structs that follow
the subchannel and mdev lifecycles, there's no reason we can't
call the official vfio_alloc_device routine for our private data,
and behave like everyone else.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-7-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
iova_bitmap_set() doesn't consider the end of the page boundary when the
first bitmap page offset isn't zero, and wrongly changes the consecutive
page right after. Consequently this leads to missing dirty pages from
reported by the device as seen from the VMM.
The current logic iterates over a given number of base pages and clamps it
to the remaining indexes to iterate in the last page. Instead of having to
consider extra pages to pin (e.g. first and extra pages), just handle the
first page as its own range and let the rest of the bitmap be handled as if
it was base page aligned.
This is done by changing iova_bitmap_mapped_remaining() to return PAGE_SIZE
- pgoff (on the first bitmap page), and leads to pgoff being set to 0 on
following iterations.
Fixes: 58ccf0190d ("vfio: Add an IOVA bitmap support")
Reported-by: Avihai Horon <avihaih@nvidia.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20221025193114.58695-3-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
kzalloc/kzfree are used so include `slab.h`. While it happens to work
without it, due to commit 8b9f3ac5b0 ("fs: introduce alloc_inode_sb() to
allocate filesystems specific inode") which indirectly includes via:
. ./include/linux/mm.h
.. ./include/linux/huge_mm.h
... ./include/linux/fs.h
.... ./include/linux/slab.h
Make it explicit should any of its indirect dependencies be dropped/changed
for entirely different reasons as it was the cause prior to commit above
recently (i.e. <= v5.18).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20221025193114.58695-2-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The ACPI _RST method has no return value, there's no need to pass a return
buffer to acpi_evaluate_object().
Fixes: d30daa33ec ("vfio: platform: call _RST method when using ACPI")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20221018152825.891032-1-rafaelmendsr@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since pci provides the helper macro module_pci_driver(), we may replace
the module_init/exit with it.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220922123507.11222-1-shangxiaojing@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines.
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available. (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported.
(Abhishek Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent. (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring. (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver.
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver. (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same.
(Jason Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to
exist with NULL iommu_group pointer to support existing userspace
use cases of holding the group file open. (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups. (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources. (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core. (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that
fall out from previous refactoring. (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper.
(Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=Z8+P
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported (Abhishek
Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same (Jason
Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to exist
with NULL iommu_group pointer to support existing userspace use cases
of holding the group file open (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that fall
out from previous refactoring (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper (Alex
Williamson)
* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
vfio: More vfio_file_is_group() use cases
vfio: Make the group FD disassociate from the iommu_group
vfio: Hold a reference to the iommu_group in kvm for SPAPR
vfio: Add vfio_file_is_group()
vfio: Change vfio_group->group_rwsem to a mutex
vfio: Remove the vfio_group->users and users_comp
vfio/mdev: add mdev available instance checking to the core
vfio/mdev: consolidate all the description sysfs into the core code
vfio/mdev: consolidate all the available_instance sysfs into the core code
vfio/mdev: consolidate all the name sysfs into the core code
vfio/mdev: consolidate all the device_api sysfs into the core code
vfio/mdev: remove mtype_get_parent_dev
vfio/mdev: remove mdev_parent_dev
vfio/mdev: unexport mdev_bus_type
vfio/mdev: remove mdev_from_dev
vfio/mdev: simplify mdev_type handling
vfio/mdev: embedd struct mdev_parent in the parent data structure
vfio/mdev: make mdev.h standalone includable
drm/i915/gvt: simplify vgpu configuration management
drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
...
Allow the vfio_group struct to exist with a NULL iommu_group pointer. When
the pointer is NULL the vfio_group users promise not to touch the
iommu_group. This allows a driver to be hot unplugged while userspace is
keeping the group FD open.
Remove all the code waiting for the group FD to close.
This fixes a userspace regression where we learned that virtnodedevd
leaves a group FD open even though the /dev/ node for it has been deleted
and all the drivers for it unplugged.
Fixes: ca5f21b257 ("vfio: Follow a strict lifetime for struct iommu_group")
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-15417f29324e+1c-vfio_group_disassociate_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
SPAPR exists completely outside the normal iommu driver framework, the
groups it creates are fake and are only created to enable VFIO's uAPI.
Thus, it does not need to follow the iommu core rule that the iommu_group
will only be touched while a driver is attached.
Carry a group reference into KVM and have KVM directly manage the lifetime
of this object independently of VFIO. This means KVM no longer relies on
the vfio group file being valid to maintain the group reference.
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-15417f29324e+1c-vfio_group_disassociate_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This replaces uses of vfio_file_iommu_group() which were only detecting if
the file is a VFIO file with no interest in the actual group.
The only remaning user of vfio_file_iommu_group() is in KVM for the SPAPR
stuff. It passes the iommu_group into the arch code through kvm for some
reason.
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-15417f29324e+1c-vfio_group_disassociate_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
These days not much is using the read side:
- device first open
- ioctl_get_status
- device FD release
- check enforced_coherent
None of this is performance, so just make it into a normal mutex.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/2-v1-917e3647f123+b1a-vfio_group_users_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Kevin points out that the users is really just tracking if
group->opened_file is set, so we can simplify this code to a wait_queue
that looks for !opened_file under the group_rwsem.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/1-v1-917e3647f123+b1a-vfio_group_users_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Many of the mdev drivers use a simple counter for keeping track of the
available instances. Move this code to the core code and store the counter
in the mdev_parent. Implement it using correct locking, fixing mdpy.
Drivers just provide the value in the mdev_driver at registration time
and the core code takes care of maintaining it and exposing the value in
sysfs.
[hch: count instances per-parent instead of per-type, use an atomic_t
to avoid taking mdev_list_lock in the show method]
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-15-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Every driver just emits a string, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.
Remove the now unused types_attrs field in struct mdev_driver and the
support code for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-14-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Every driver just print a number, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-13-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Every driver just emits a static string, simply add a field to the
mdev_type for the driver to fill out or fall back to the sysfs name and
provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-12-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Every driver just emits a static string, simply feed it through the ops
and provide a standard sysfs show function.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-11-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Just open code the dereferences in the only user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-10-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Just open code the dereferences in the only user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-9-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
mdev_bus_type is only used in mdev.ko now, so unexport it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-8-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Just open code it in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-7-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Instead of abusing struct attribute_group to control initialization of
struct mdev_type, just define the actual attributes in the mdev_driver,
allocate the mdev_type structures in the caller and pass them to
mdev_register_parent.
This allows the caller to use container_of to get at the containing
structure and thus significantly simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-6-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Simplify mdev_{un}register_device by requiring the caller to pass in
a structure allocate as part of the parent device structure. This
removes the need for a list of parents and the separate mdev_parent
refcount as we can simplify rely on the reference to the parent device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-5-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Include <linux/device.h> and <linux/uuid.h> so that users of this headers
don't need to do that and remove those includes that aren't needed
any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-4-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
1. Modify some annotation information formats to keep the
entire driver annotation format consistent.
2. Modify some log description formats to be consistent with
the format of the entire driver log.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20220926093332.28824-6-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The QM_QUE_ISO_CFG macro definition is no longer used
and needs to be deleted from the current driver.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20220926093332.28824-5-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Remove unused function parameters for vf_qm_fun_reset() and
ensure the device is enabled before the reset operation
is performed.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20220926093332.28824-4-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The queue address of the accelerator device should be combined into
a dma address in a way of combining the low and high bits.
The previous combination is wrong and needs to be modified.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20220926093332.28824-3-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
During the process of compatibility and matching of live migration
device information, if the isolation status of the two devices is
inconsistent, the live migration needs to be exited.
The current driver does not return the error code correctly and
needs to be fixed.
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20220926093332.28824-2-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The iommu_group comes from the struct device that a driver has been bound
to and then created a struct vfio_device against. To keep the iommu layer
sane we want to have a simple rule that only an attached driver should be
using the iommu API. Particularly only an attached driver should hold
ownership.
In VFIO's case since it uses the group APIs and it shares between
different drivers it is a bit more complicated, but the principle still
holds.
Solve this by waiting for all users of the vfio_group to stop before
allowing vfio_unregister_group_dev() to complete. This is done with a new
completion to know when the users go away and an additional refcount to
keep track of how many device drivers are sharing the vfio group. The last
driver to be unregistered will clean up the group.
This solves crashes in the S390 iommu driver that come because VFIO ends
up racing releasing ownership (which attaches the default iommu_domain to
the device) with the removal of that same device from the iommu
driver. This is a side case that iommu drivers should not have to cope
with.
iommu driver failed to attach the default/blocking domain
WARNING: CPU: 0 PID: 5082 at drivers/iommu/iommu.c:1961 iommu_detach_group+0x6c/0x80
Modules linked in: macvtap macvlan tap vfio_pci vfio_pci_core irqbypass vfio_virqfd kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink mlx5_ib sunrpc ib_uverbs ism smc uvdevice ib_core s390_trng eadm_sch tape_3590 tape tape_class vfio_ccw mdev vfio_iommu_type1 vfio zcrypt_cex4 sch_fq_codel configfs ghash_s390 prng chacha_s390 libchacha aes_s390 mlx5_core des_s390 libdes sha3_512_s390 nvme sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common nvme_core zfcp scsi_transport_fc pkey zcrypt rng_core autofs4
CPU: 0 PID: 5082 Comm: qemu-system-s39 Tainted: G W 6.0.0-rc3 #5
Hardware name: IBM 3931 A01 782 (LPAR)
Krnl PSW : 0704c00180000000 000000095bb10d28 (iommu_detach_group+0x70/0x80)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000001 0000000900000027 0000000000000039 000000095c97ffe0
00000000fffeffff 00000009fc290000 00000000af1fda50 00000000af590b58
00000000af1fdaf0 0000000135c7a320 0000000135e52258 0000000135e52200
00000000a29e8000 00000000af590b40 000000095bb10d24 0000038004b13c98
Krnl Code: 000000095bb10d18: c020003d56fc larl %r2,000000095c2bbb10
000000095bb10d1e: c0e50019d901 brasl %r14,000000095be4bf20
#000000095bb10d24: af000000 mc 0,0
>000000095bb10d28: b904002a lgr %r2,%r10
000000095bb10d2c: ebaff0a00004 lmg %r10,%r15,160(%r15)
000000095bb10d32: c0f4001aa867 brcl 15,000000095be65e00
000000095bb10d38: c004002168e0 brcl 0,000000095bf3def8
000000095bb10d3e: eb6ff0480024 stmg %r6,%r15,72(%r15)
Call Trace:
[<000000095bb10d28>] iommu_detach_group+0x70/0x80
([<000000095bb10d24>] iommu_detach_group+0x6c/0x80)
[<000003ff80243b0e>] vfio_iommu_type1_detach_group+0x136/0x6c8 [vfio_iommu_type1]
[<000003ff80137780>] __vfio_group_unset_container+0x58/0x158 [vfio]
[<000003ff80138a16>] vfio_group_fops_unl_ioctl+0x1b6/0x210 [vfio]
pci 0004:00:00.0: Removing from iommu group 4
[<000000095b5b62e8>] __s390x_sys_ioctl+0xc0/0x100
[<000000095be5d3b4>] __do_syscall+0x1d4/0x200
[<000000095be6c072>] system_call+0x82/0xb0
Last Breaking-Event-Address:
[<000000095be4bf80>] __warn_printk+0x60/0x68
It indicates that domain->ops->attach_dev() failed because the driver has
already passed the point of destructing the device.
Fixes: 9ac8545199 ("iommu: Fix use-after-free in iommu_release_device")
Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v2-a3c5f4429e2a+55-iommu_group_lifetime_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
All the functions that dereference struct vfio_container are moved into
container.c.
Simple code motion, no functional change.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v3-297af71838d2+b9-vfio_container_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is a container item.
A following patch will move the vfio_container functions to their own .c
file.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v3-297af71838d2+b9-vfio_container_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
To vfio_container_ioctl_check_extension().
A following patch will turn this into a non-static function, make it clear
it is related to the container.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v3-297af71838d2+b9-vfio_container_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This miscdev, noiommu driver and a couple of globals are all container
items. Move this init into its own functions.
A following patch will move the vfio_container functions to their own .c
file.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v3-297af71838d2+b9-vfio_container_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This can all be accomplished using typical IS_ENABLED techniques, drop it
all.
Also rename the variable to vfio_noiommu so this can be made global in
following patches.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v3-297af71838d2+b9-vfio_container_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This splits up the ioctl of vfio_group_ioctl_set_container() so it
determines the type of file then invokes a type specific attachment
function. Future patches will add iommufd to this function as an
alternative type.
A following patch will move the vfio_container functions to their own .c
file.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v3-297af71838d2+b9-vfio_container_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
To vfio_group_detach_container(). This function is really a container
function.
Fold the WARN_ON() into it as a precondition assertion.
A following patch will move the vfio_container functions to their own .c
file.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v3-297af71838d2+b9-vfio_container_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
and replace kref. With it a 'vfio-dev/vfioX' node is created under the
sysfs path of the parent, indicating the device is bound to a vfio
driver, e.g.:
/sys/devices/pci0000\:6f/0000\:6f\:01.0/vfio-dev/vfio0
It is also a preparatory step toward adding cdev for supporting future
device-oriented uAPI.
Add Documentation/ABI/testing/sysfs-devices-vfio-dev.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220921104401.38898-16-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
With the addition of vfio_put_device() now the names become confusing.
vfio_put_device() is clear from object life cycle p.o.v given kref.
vfio_device_put()/vfio_device_try_get() are helpers for tracking
users on a registered device.
Now rename them:
- vfio_device_put() -> vfio_device_put_registration()
- vfio_device_try_get() -> vfio_device_try_get_registration()
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20220921104401.38898-15-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
ccw is the only exception which cannot use vfio_alloc_device() because
its private device structure is designed to serve both mdev and parent.
Life cycle of the parent is managed by css_driver so vfio_ccw_private
must be allocated/freed in css_driver probe/remove path instead of
conforming to vfio core life cycle for mdev.
Given that use a wait/completion scheme so the mdev remove path waits
after vfio_put_device() until receiving a completion notification from
@release. The completion indicates that all active references on
vfio_device have been released.
After that point although free of vfio_ccw_private is delayed to
css_driver it's at least guaranteed to have no parallel reference on
released vfio device part from other code paths.
memset() in @probe is removed. vfio_device is either already cleared
when probed for the first time or cleared in @release from last probe.
The right fix is to introduce separate structures for mdev and parent,
but this won't happen in short term per prior discussions.
Remove vfio_init/uninit_group_dev() as no user now.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220921104401.38898-14-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Implement amba's own vfio_device_ops.
Remove vfio_platform_probe/remove_common() given no user now.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20220921104401.38898-13-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move vfio_device_ops from platform core to platform drivers so device
specific init/cleanup can be added.
Introduce two new helpers vfio_platform_init/release_common() for the
use in driver @init/@release.
vfio_platform_probe/remove_common() will be deprecated.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20220921104401.38898-12-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Also add a comment to mark that vfio core releases device_set if @init
fails.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220921104401.38898-11-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Tidy up @probe so all migration specific initialization logic is moved
to migration specific @init callback.
Remove vfio_pci_core_{un}init_device() given no user now.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20220921104401.38898-5-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
mlx5 has its own @init/@release for handling migration cap.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220921104401.38898-4-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Also introduce two pci core helpers as @init/@release for pci drivers:
- vfio_pci_core_init_dev()
- vfio_pci_core_release_dev()
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220921104401.38898-3-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The idea is to let vfio core manage the vfio_device life cycle instead
of duplicating the logic cross drivers. This is also a preparatory
step for adding struct device into vfio_device.
New pair of helpers together with a kref in vfio_device:
- vfio_alloc_device()
- vfio_put_device()
Drivers can register @init/@release callbacks to manage any private
state wrapping the vfio_device.
However vfio-ccw doesn't fit this model due to a life cycle mess
that its private structure mixes both parent and mdev info hence must
be allocated/freed outside of the life cycle of vfio device.
Per prior discussions this won't be fixed in short term by IBM folks.
Instead of waiting for those modifications introduce another helper
vfio_init_device() so ccw can call it to initialize a pre-allocated
vfio_device.
Further implication of the ccw trick is that vfio_device cannot be
freed uniformly in vfio core. Instead, require *EVERY* driver to
implement @release and free vfio_device inside. Then ccw can choose
to delay the free at its own discretion.
Another trick down the road is that kvzalloc() is used to accommodate
the need of gvt which uses vzalloc() while all others use kzalloc().
So drivers should call a helper vfio_free_device() to free the
vfio_device instead of assuming that kfree() or vfree() is appliable.
Later once the ccw mess is fixed we can remove those tricks and
fully handle structure alloc/free in vfio core.
Existing vfio_{un}init_group_dev() will be deprecated after all
existing usages are converted to the new model.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Co-developed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20220921104401.38898-2-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that everything is ready set the driver DMA logging callbacks if
supported by the device.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-11-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Handle async error events and health/recovery flow to safely stop the
tracker upon error scenarios.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-10-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Report dirty pages from tracker.
It includes:
Querying for dirty pages in a given IOVA range, this is done by
modifying the tracker into the reporting state and supplying the
required range.
Using the CQ event completion mechanism to be notified once data is
ready on the CQ/QP to be processed.
Once data is available turn on the corresponding bits in the bit map.
This functionality will be used as part of the 'log_read_and_clear'
driver callback in the next patches.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-9-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add support for creating and destroying page tracker object.
This object is used to control/report the device dirty pages.
As part of creating the tracker need to consider the device capabilities
for max ranges and adapt/combine ranges accordingly.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-8-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Init QP based resources for dirty tracking to be used upon start
logging.
It includes:
Creating the host and firmware RC QPs, move each of them to its expected
state based on the device specification, etc.
Creating the relevant resources which are needed by both QPs as of UAR,
PD, etc.
Creating the host receive side resources as of MKEY, CQ, receive WQEs,
etc.
The above resources are cleaned-up upon stop logging.
The tracker object that will be introduced by next patches will use
those resources.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-7-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introduce the DMA logging feature support in the vfio core layer.
It includes the processing of the device start/stop/report DMA logging
UAPIs and calling the relevant driver 'op' to do the work.
Specifically,
Upon start, the core translates the given input ranges into an interval
tree, checks for unexpected overlapping, non aligned ranges and then
pass the translated input to the driver for start tracking the given
ranges.
Upon report, the core translates the given input user space bitmap and
page size into an IOVA kernel bitmap iterator. Then it iterates it and
call the driver to set the corresponding bits for the dirtied pages in a
specific IOVA range.
Upon stop, the driver is called to stop the previous started tracking.
The next patches from the series will introduce the mlx5 driver
implementation for the logging ops.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-6-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The new facility adds a bunch of wrappers that abstract how an IOVA range
is represented in a bitmap that is granulated by a given page_size. So it
translates all the lifting of dealing with user pointers into its
corresponding kernel addresses backing said user memory into doing finally
the (non-atomic) bitmap ops to change various bits.
The formula for the bitmap is:
data[(iova / page_size) / 64] & (1ULL << (iova % 64))
Where 64 is the number of bits in a unsigned long (depending on arch)
It introduces an IOVA iterator that uses a windowing scheme to minimize the
pinning overhead, as opposed to pinning it on demand 4K at a time. Assuming
a 4K kernel page and 4K requested page size, we can use a single kernel
page to hold 512 page pointers, mapping 2M of bitmap, representing 64G of
IOVA space.
An example usage of these helpers for a given @base_iova, @page_size,
@length and __user @data:
bitmap = iova_bitmap_alloc(base_iova, page_size, length, data);
if (IS_ERR(bitmap))
return -ENOMEM;
ret = iova_bitmap_for_each(bitmap, arg, dirty_reporter_fn);
iova_bitmap_free(bitmap);
Each iteration of the @dirty_reporter_fn is called with a unique @iova
and @length argument, indicating the current range available through the
iova_bitmap. The @dirty_reporter_fn uses iova_bitmap_set() to mark dirty
areas (@iova_length) within that provided range, as following:
iova_bitmap_set(bitmap, iova, iova_length);
The facility is intended to be used for user bitmaps representing dirtied
IOVAs by IOMMU (via IOMMUFD) and PCI Devices (via vfio-pci).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
L and S are swapped in the message.
s/VFIO_FLS_MC/VFIO_FSL_MC/
Also use 'ret' instead of 'WARN_ON(ret)' to avoid a duplicated message.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Diana Craciun <diana.craciun@oss.nxp.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/a7c1394346725b7435792628c8d4c06a0a745e0b.1662134821.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The iommu-dma layer is now mostly encapsulated by iommu_dma_ops, with
only a couple more public interfaces left pertaining to MSI integration.
Since these depend on the main IOMMU API header anyway, move their
declarations there, taking the opportunity to update the half-baked
comments to proper kerneldoc along the way.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/9cd99738f52094e6bed44bfee03fa4f288d20695.1660668998.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 91be0bd6c6cf("vfio/pci: Have all VFIO PCI drivers store the
vfio_pci_core_device in drvdata") introduced a helper function to
retrieve the drvdata but used "hssi" instead of "hisi" for the
function prefix. Correct that and also while at it, moved the
function a bit down so that it's close to other hisi_ prefixed
functions.
No functional changes.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220831085943.993-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This counts the number of devices attached to a vfio_group, ie the number
of items in the group->device_list.
It is only read in vfio_pin_pages(), as some kind of protection against
limitations in type1.
However, with all the code cleanups in this area, now that
vfio_pin_pages() accepts a vfio_device directly it is redundant. All
drivers are already calling vfio_register_emulated_iommu_dev() which
directly creates a group specifically for the device and thus it is
guaranteed that there is a singleton group.
Leave a note in the comment about this requirement and remove the logic.
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v2-d4374a7bf0c9+c4-vfio_dev_counter_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch implements VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP
device feature. In the VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY, if there is
any access for the VFIO device on the host side, then the device will
be moved out of the low power state without the user's guest driver
involvement. Once the device access has been finished, then the host
can move the device again into low power state. With the low power
entry happened through VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP,
the device will not be moved back into the low power state and
a notification will be sent to the user by triggering wakeup eventfd.
vfio_pci_core_pm_entry() will be called for both the variants of low
power feature entry so add an extra argument for wakeup eventfd context
and store locally in 'struct vfio_pci_core_device'.
For the entry happened without wakeup eventfd, all the exit related
handling will be done by the LOW_POWER_EXIT device feature only.
When the LOW_POWER_EXIT will be called, then the vfio core layer
vfio_device_pm_runtime_get() will increment the usage count and will
resume the device. In the driver runtime_resume callback, the
'pm_wake_eventfd_ctx' will be NULL. Then vfio_pci_core_pm_exit()
will call vfio_pci_runtime_pm_exit() and all the exit related handling
will be done.
For the entry happened with wakeup eventfd, in the driver resume
callback, eventfd will be triggered and all the exit related handling will
be done. When vfio_pci_runtime_pm_exit() will be called by
vfio_pci_core_pm_exit(), then it will return early.
But if the runtime suspend has not happened on the host side, then
all the exit related handling will be done in vfio_pci_core_pm_exit()
only.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220829114850.4341-6-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, if the runtime power management is enabled for vfio-pci
based devices in the guest OS, then the guest OS will do the register
write for PCI_PM_CTRL register. This write request will be handled in
vfio_pm_config_write() where it will do the actual register write of
PCI_PM_CTRL register. With this, the maximum D3hot state can be
achieved for low power. If we can use the runtime PM framework, then
we can achieve the D3cold state (on the supported systems) which will
help in saving maximum power.
1. D3cold state can't be achieved by writing PCI standard
PM config registers. This patch implements the following
newly added low power related device features:
- VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY
- VFIO_DEVICE_FEATURE_LOW_POWER_EXIT
The VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY feature will allow the
device to make use of low power platform states on the host
while the VFIO_DEVICE_FEATURE_LOW_POWER_EXIT will prevent
further use of those power states.
2. The vfio-pci driver uses runtime PM framework for low power entry and
exit. On the platforms where D3cold state is supported, the runtime
PM framework will put the device into D3cold otherwise, D3hot or some
other power state will be used.
There are various cases where the device will not go into the runtime
suspended state. For example,
- The runtime power management is disabled on the host side for
the device.
- The user keeps the device busy after calling LOW_POWER_ENTRY.
- There are dependent devices that are still in runtime active state.
For these cases, the device will be in the same power state that has
been configured by the user through PCI_PM_CTRL register.
3. The hypervisors can implement virtual ACPI methods. For example,
in guest linux OS if PCI device ACPI node has _PR3 and _PR0 power
resources with _ON/_OFF method, then guest linux OS invokes
the _OFF method during D3cold transition and then _ON during D0
transition. The hypervisor can tap these virtual ACPI calls and then
call the low power device feature IOCTL.
4. The 'pm_runtime_engaged' flag tracks the entry and exit to
runtime PM. This flag is protected with 'memory_lock' semaphore.
5. All the config and other region access are wrapped under
pm_runtime_resume_and_get() and pm_runtime_put(). So, if any
device access happens while the device is in the runtime suspended
state, then the device will be resumed first before access. Once the
access has been finished, then the device will again go into the
runtime suspended state.
6. The memory region access through mmap will not be allowed in the low
power state. Since __vfio_pci_memory_enabled() is a common function,
so check for 'pm_runtime_engaged' has been added explicitly in
vfio_pci_mmap_fault() to block only mmap'ed access.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220829114850.4341-5-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch adds INTx handling during runtime suspend/resume.
All the suspend/resume related code for the user to put the device
into the low power state will be added in subsequent patches.
The INTx lines may be shared among devices. Whenever any INTx
interrupt comes for the VFIO devices, then vfio_intx_handler() will be
called for each device sharing the interrupt. Inside vfio_intx_handler(),
it calls pci_check_and_mask_intx() and checks if the interrupt has
been generated for the current device. Now, if the device is already
in the D3cold state, then the config space can not be read. Attempt
to read config space in D3cold state can cause system unresponsiveness
in a few systems. To prevent this, mask INTx in runtime suspend callback,
and unmask the same in runtime resume callback. If INTx has been already
masked, then no handling is needed in runtime suspend/resume callbacks.
'pm_intx_masked' tracks this, and vfio_pci_intx_mask() has been updated
to return true if the INTx vfio_pci_irq_ctx.masked value is changed
inside this function.
For the runtime suspend which is triggered for the no user of VFIO
device, the 'irq_type' will be VFIO_PCI_NUM_IRQS and these
callbacks won't do anything.
The MSI/MSI-X are not shared so similar handling should not be
needed for MSI/MSI-X. vfio_msihandler() triggers eventfd_signal()
without doing any device-specific config access. When the user performs
any config access or IOCTL after receiving the eventfd notification,
then the device will be moved to the D0 state first before
servicing any request.
Another option was to check this flag 'pm_intx_masked' inside
vfio_intx_handler() instead of masking the interrupts. This flag
is being set inside the runtime_suspend callback but the device
can be in non-D3cold state (for example, if the user has disabled D3cold
explicitly by sysfs, the D3cold is not supported in the platform, etc.).
Also, in D3cold supported case, the device will be in D0 till the
PCI core moves the device into D3cold. In this case, there is
a possibility that the device can generate an interrupt. Adding check
in the IRQ handler will not clear the IRQ status and the interrupt
line will still be asserted. This can cause interrupt flooding.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220829114850.4341-4-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio-pci based drivers will have runtime power management
support where the user can put the device into the low power state
and then PCI devices can go into the D3cold state. If the device is
in the low power state and the user issues any IOCTL, then the
device should be moved out of the low power state first. Once
the IOCTL is serviced, then it can go into the low power state again.
The runtime PM framework manages this with help of usage count.
One option was to add the runtime PM related API's inside vfio-pci
driver but some IOCTL (like VFIO_DEVICE_FEATURE) can follow a
different path and more IOCTL can be added in the future. Also, the
runtime PM will be added for vfio-pci based drivers variant currently,
but the other VFIO based drivers can use the same in the
future. So, this patch adds the runtime calls runtime-related API in
the top-level IOCTL function itself.
For the VFIO drivers which do not have runtime power management
support currently, the runtime PM API's won't be invoked. Only for
vfio-pci based drivers currently, the runtime PM API's will be invoked
to increment and decrement the usage count. In the vfio-pci drivers also,
the variant drivers can opt-out by incrementing the usage count during
device-open. The pm_runtime_resume_and_get() checks the device
current status and will return early if the device is already in the
ACTIVE state.
Taking this usage count incremented while servicing IOCTL will make
sure that the user won't put the device into the low power state when any
other IOCTL is being serviced in parallel. Let's consider the
following scenario:
1. Some other IOCTL is called.
2. The user has opened another device instance and called the IOCTL for
low power entry.
3. The low power entry IOCTL moves the device into the low power state.
4. The other IOCTL finishes.
If we don't keep the usage count incremented then the device
access will happen between step 3 and 4 while the device has already
gone into the low power state.
The pm_runtime_resume_and_get() will be the first call so its error
should not be propagated to user space directly. For example, if
pm_runtime_resume_and_get() can return -EINVAL for the cases where the
user has passed the correct argument. So the
pm_runtime_resume_and_get() errors have been masked behind -EIO.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220829114850.4341-3-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is the last sizable implementation in vfio_group_fops_unl_ioctl(),
move it to a function so vfio_group_fops_unl_ioctl() is emptied out.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v2-0f9e632d54fb+d6-vfio_ioctl_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Make it clear that this is the body of the ioctl. Fold the locking into
the function so it is self contained like the other ioctls.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/7-v2-0f9e632d54fb+d6-vfio_ioctl_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
No reason to split it up like this, just have one function to process the
ioctl. Move the lock into the function as well to avoid having a lockdep
annotation.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-0f9e632d54fb+d6-vfio_ioctl_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
No reason to split it up like this, just have one function to process the
ioctl.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-0f9e632d54fb+d6-vfio_ioctl_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This makes the code clearer and replaces a few places trying to access a
flex array with an actual flex array.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-0f9e632d54fb+d6-vfio_ioctl_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
500 lines is a bit long for a single function, move the bodies of each
ioctl into separate functions and leave behind a switch statement to
dispatch them. This patch just adds the function declarations and does not
fix the indenting. The next patch will restore the indenting.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-0f9e632d54fb+d6-vfio_ioctl_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This only returns 0 or -ERRNO, it should return int like all the other
ioctl dispatch functions.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-0f9e632d54fb+d6-vfio_ioctl_split_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Only three of these are actually used, simplify to three inline functions,
and open code the if statement in vfio_pci_config.c.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/3-v2-1bd95d72f298+e0e-vfio_pci_priv_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As this is part of the vfio_pci_core component it should be called
vfio_pci_core_register_dev_region() like everything else exported from
this module.
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/2-v2-1bd95d72f298+e0e-vfio_pci_priv_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The header in include/linux should have only the exported interface for
other vfio_pci modules to use. Internal definitions for vfio_pci.ko
should be in a "priv" header along side the .c files.
Move the internal declarations out of vfio_pci_core.h. They either move to
vfio_pci_priv.h or to the C file that is the only user.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/1-v2-1bd95d72f298+e0e-vfio_pci_priv_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There's currently a reference count leak on the zero page. We increment
the reference via pin_user_pages_remote(), but the page is later handled
as an invalid/reserved page, therefore it's not accounted against the
user and not unpinned by our put_pfn().
Introducing special zero page handling in put_pfn() would resolve the
leak, but without accounting of the zero page, a single user could
still create enough mappings to generate a reference count overflow.
The zero page is always resident, so for our purposes there's no reason
to keep it pinned. Therefore, add a loop to walk pages returned from
pin_user_pages_remote() and unpin any zero pages.
Cc: stable@vger.kernel.org
Reported-by: Luboslav Pivarc <lpivarc@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/166182871735.3518559.8884121293045337358.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We have a cross dependency between KVM and VFIO when using
s390 vfio_pci_zdev extensions for PCI passthrough
To be able to keep both subsystem modular we add a registering
hook inside the S390 core code.
This fixes a build problem when VFIO is built-in and KVM is built
as a module.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Fixes: 09340b2fca ("KVM: s390: pci: add routines to start/stop interpretive execution")
Cc: <stable@vger.kernel.org>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20220819122945.9309-1-pmorel@linux.ibm.com
Message-Id: <20220819122945.9309-1-pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
If a source file has the same name as a module then kbuild only supports
a single source file in the module.
Rename vfio.c to vfio_main.c so that we can have more that one .c file
in vfio.ko.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220731125503.142683-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Cleanup use of extern in function prototypes (Alex Williamson)
- Simplify bus_type usage and convert to device IOMMU interfaces
(Robin Murphy)
- Check missed return value and fix comment typos (Bo Liu)
- Split migration ops from device ops and fix races in mlx5 migration
support (Yishai Hadas)
- Fix missed return value check in noiommu support (Liam Ni)
- Hardening to clear buffer pointer to avoid use-after-free (Schspa Shi)
- Remove requirement that only the same mm can unmap a previously
mapped range (Li Zhe)
- Adjust semaphore release vs device open counter (Yi Liu)
- Remove unused arg from SPAPR support code (Deming Wang)
- Rework vfio-ccw driver to better fit new mdev framework (Eric Farman,
Michael Kawano)
- Replace DMA unmap notifier with callbacks (Jason Gunthorpe)
- Clarify SPAPR support comment relative to iommu_ops (Alexey Kardashevskiy)
- Revise page pinning API towards compatibility with future iommufd support
(Nicolin Chen)
- Resolve issues in vfio-ccw, including use of DMA unmap callback
(Eric Farman)
-----BEGIN PGP SIGNATURE-----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=4BE8
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.0-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Cleanup use of extern in function prototypes (Alex Williamson)
- Simplify bus_type usage and convert to device IOMMU interfaces (Robin
Murphy)
- Check missed return value and fix comment typos (Bo Liu)
- Split migration ops from device ops and fix races in mlx5 migration
support (Yishai Hadas)
- Fix missed return value check in noiommu support (Liam Ni)
- Hardening to clear buffer pointer to avoid use-after-free (Schspa
Shi)
- Remove requirement that only the same mm can unmap a previously
mapped range (Li Zhe)
- Adjust semaphore release vs device open counter (Yi Liu)
- Remove unused arg from SPAPR support code (Deming Wang)
- Rework vfio-ccw driver to better fit new mdev framework (Eric Farman,
Michael Kawano)
- Replace DMA unmap notifier with callbacks (Jason Gunthorpe)
- Clarify SPAPR support comment relative to iommu_ops (Alexey
Kardashevskiy)
- Revise page pinning API towards compatibility with future iommufd
support (Nicolin Chen)
- Resolve issues in vfio-ccw, including use of DMA unmap callback (Eric
Farman)
* tag 'vfio-v6.0-rc1' of https://github.com/awilliam/linux-vfio: (40 commits)
vfio/pci: fix the wrong word
vfio/ccw: Check return code from subchannel quiesce
vfio/ccw: Remove FSM Close from remove handlers
vfio/ccw: Add length to DMA_UNMAP checks
vfio: Replace phys_pfn with pages for vfio_pin_pages()
vfio/ccw: Add kmap_local_page() for memcpy
vfio: Rename user_iova of vfio_dma_rw()
vfio/ccw: Change pa_pfn list to pa_iova list
vfio/ap: Change saved_pfn to saved_iova
vfio: Pass in starting IOVA to vfio_pin/unpin_pages API
vfio/ccw: Only pass in contiguous pages
vfio/ap: Pass in physical address of ind to ap_aqic()
drm/i915/gvt: Replace roundup with DIV_ROUND_UP
vfio: Make vfio_unpin_pages() return void
vfio/spapr_tce: Fix the comment
vfio: Replace the iommu notifier with a device list
vfio: Replace the DMA unmapping notifier with a callback
vfio/ccw: Move FSM open/close to MDEV open/close
vfio/ccw: Refactor vfio_ccw_mdev_reset
vfio/ccw: Create a CLOSE FSM event
...
* Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
* Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
* Disagregation of the vcpu flags in separate sets to better track
their use model.
* A fix for the GICv2-on-v3 selftest
* A small set of cosmetic fixes
RISC-V:
* Track ISA extensions used by Guest using bitmap
* Added system instruction emulation framework
* Added CSR emulation framework
* Added gfp_custom flag in struct kvm_mmu_memory_cache
* Added G-stage ioremap() and iounmap() functions
* Added support for Svpbmt inside Guest
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
x86:
* Permit guests to ignore single-bit ECC errors
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Use try_cmpxchg64 instead of cmpxchg64
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* Allow NX huge page mitigation to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
* Miscellaneous cleanups:
** MCE MSR emulation
** Use separate namespaces for guest PTEs and shadow PTEs bitmasks
** PIO emulation
** Reorganize rmap API, mostly around rmap destruction
** Do not workaround very old KVM bugs for L0 that runs with nesting enabled
** new selftests API for CPUID
Generic:
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLnyo4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMtQQf/XjVWiRcWLPR9dqzRM/vvRXpiG+UL
jU93R7m6ma99aqTtrxV/AE+kHgamBlma3Cwo+AcWk9uCVNbIhFjv2YKg6HptKU0e
oJT3zRYp+XIjEo7Kfw+TwroZbTlG6gN83l1oBLFMqiFmHsMLnXSI2mm8MXyi3dNB
vR2uIcTAl58KIprqNNsYJ2dNn74ogOMiXYx9XzoA9/5Xb6c0h4rreHJa5t+0s9RO
Gz7Io3PxumgsbJngjyL1Ve5oxhlIAcZA8DU0PQmjxo3eS+k6BcmavGFd45gNL5zg
iLpCh4k86spmzh8CWkAAwWPQE4dZknK6jTctJc0OFVad3Z7+X7n0E8TFrA==
=PM8o
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution
-----BEGIN PGP SIGNATURE-----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=HQ9U
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- New driver for logicvc - which is a display IP core.
- EDID parser rework to add new extensions
- fbcon scrolling improvements
- i915 has some more DG2 work but not enabled by default, but should
have enough features for userspace to work now.
Otherwise it's lots of work all over the place. Detailed summary:
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution"
* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
drm/amdgpu: enable support for psp 13.0.4 block
drm/amdgpu: add files for PSP 13.0.4
drm/amdgpu: add header files for MP 13.0.4
drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
drm/amdgpu: send msg to IMU for the front-door loading
drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
drm/amdgpu: fix hive reference leak when reflecting psp topology info
drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
drm/amd/pm: update driver if header for SMU 13.0.0
drm/amdgpu: move mes self test after drm sched re-started
drm/amdgpu: drop non-necessary call trace dump
drm/amdgpu: enable VCN cg and JPEG cg/pg
drm/amdgpu: vcn_4_0_2 video codec query
drm/amdgpu: add VCN_4_0_2 firmware support
drm/amdgpu: add VCN function in NBIO v7.7
drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
drm/amd/amdgpu: add memory training support for PSP_V13
drm/amdkfd: remove an unnecessary amdgpu_bo_ref
drm/amd/pm: Add get_gfx_off_status interface for yellow carp
...
magical no_llseek thing and makes checks consistent. In particular,
ad-hoc "can we do splice via internal pipe" checks got saner (and
somewhat more permissive, which is what Jason had been after, AFAICT)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYug2xgAKCRBZ7Krx/gZQ
6wxWAQDqeg+xMq2FGPXmgjCa+Cp3PXH96Lp6f3hHzakIDx+t8gEAxvuiXAD22Mct
6S1SKuGj0iDIuM4L7hUiWTiY/bDXSAc=
=3EC/
-----END PGP SIGNATURE-----
Merge tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lseek updates from Al Viro:
"Jason's lseek series.
Saner handling of 'lseek should fail with ESPIPE' - this gets rid of
the magical no_llseek thing and makes checks consistent.
In particular, the ad-hoc "can we do splice via internal pipe" checks
got saner (and somewhat more permissive, which is what Jason had been
after, AFAICT)"
* tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove no_llseek
fs: check FMODE_LSEEK to control internal pipe splicing
vfio: do not set FMODE_LSEEK flag
dma-buf: remove useless FMODE_LSEEK flag
fs: do not compare against ->llseek
fs: clear or set FMODE_LSEEK based on llseek function
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
Most of the callers of vfio_pin_pages() want "struct page *" and the
low-level mm code to pin pages returns a list of "struct page *" too.
So there's no gain in converting "struct page *" to PFN in between.
Replace the output parameter "phys_pfn" list with a "pages" list, to
simplify callers. This also allows us to replace the vfio_iommu_type1
implementation with a more efficient one.
And drop the pfn_valid check in the gvt code, as there is no need to
do such a check at a page-backed struct page pointer.
For now, also update vfio_iommu_type1 to fit this new parameter too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-11-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Following the updated vfio_pin/unpin_pages(), use the simpler "iova".
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-9-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_pin/unpin_pages() so far accepted arrays of PFNs of user IOVA.
Among all three callers, there was only one caller possibly passing in
a non-contiguous PFN list, which is now ensured to have contiguous PFN
inputs too.
Pass in the starting address with "iova" alone to simplify things, so
callers no longer need to maintain a PFN list or to pin/unpin one page
at a time. This also allows VFIO to use more efficient implementations
of pin/unpin_pages.
For now, also update vfio_iommu_type1 to fit this new parameter too,
while keeping its input intact (being user_iova) since we don't want
to spend too much effort swapping its parameters and local variables
at that level.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-6-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There's only one caller that checks its return value with a WARN_ON_ONCE,
while all other callers don't check the return value at all. Above that,
an undo function should not fail. So, simplify the API to return void by
embedding similar WARN_ONs.
Also for users to pinpoint which condition fails, separate WARN_ON lines,
yet remove the "driver->ops->unpin_pages" check, since it's unreasonable
for callers to unpin on something totally random that wasn't even pinned.
And remove NULL pointer checks for they would trigger oops vs. warnings.
Note that npage is already validated in the vfio core, thus drop the same
check in the type1 code.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20220723020256.30081-2-nicolinc@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Grepping for "iommu_ops" finds this spot and gives wrong impression
that iommu_ops is used in here, fix the comment.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Link: https://lore.kernel.org/r/20220714080912.3713509-1-aik@ozlabs.ru
[aw: convert to multi-line comment]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Instead of bouncing the function call to the driver op through a blocking
notifier just have the iommu layer call it directly.
Register each device that is being attached to the iommu with the lower
driver which then threads them on a linked list and calls the appropriate
driver op at the right time.
Currently the only use is if dma_unmap() is defined.
Also, fully lock all the debugging tests on the pinning path that a
dma_unmap is registered.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-681e038e30fd+78-vfio_unmap_notif_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Instead of having drivers register the notifier with explicit code just
have them provide a dma_unmap callback op in their driver ops and rely on
the core code to wire it up.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-681e038e30fd+78-vfio_unmap_notif_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This file does not support llseek, so don't set the flag advertising it.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When doing load/store interpretation, the maximum store block length is
determined by the underlying firmware, not the host kernel API. Reflect
that in the associated Query PCI Function Group clp capability and let
userspace decide which is appropriate to present to the guest.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-20-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The function handle is a system-wide unique identifier for a zPCI
device. With zPCI instruction interpretation, the host will no
longer be executing the zPCI instructions on behalf of the guest.
As a result, the guest needs to use the real function handle in
order for firmware to associate the instruction with the proper
PCI function. Let's provide that handle to the guest.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-19-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
During vfio-pci open_device, pass the KVM associated with the vfio group
(if one exists). This is needed in order to pass a special indicator
(GISA) to firmware to allow zPCI interpretation facilities to be used
for only the specific KVM associated with the vfio-pci device. During
vfio-pci close_device, unregister the notifier.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-18-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The current contents of vfio-pci-zdev are today only useful in a KVM
environment; let's tie everything currently under vfio-pci-zdev to
this Kconfig statement and require KVM in this case, reducing complexity
(e.g. symbol lookups).
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-11-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The parameter of container has been unused for tce_iommu_unuse_page.
So, we should delete it.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Link: https://lore.kernel.org/r/20220702064613.5293-1-wangdeming@inspur.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The test isn't going to work if a group doesn't exist. Normally this isn't
a problem since VFIO isn't going to create a device if there is no group,
but the special CONFIG_VFIO_NOIOMMU behavior allows bypassing this
prevention. The new cap test effectively forces a group and breaks this
config option.
Move the cap test to vfio_group_find_or_alloc() which is the earliest time
we know we have a group available and thus are not running in noiommu mode.
Fixes: e8ae0e140c ("vfio: Require that devices support DMA cache coherence")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-e8934b490f36+f4-vfio_cap_fix_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We do not protect the vfio_device::open_count with group_rwsem elsewhere (see
vfio_device_fops_release as a comparison, where we already drop group_rwsem
before open_count--). So move the group_rwsem unlock prior to open_count--.
This change now also drops group_rswem before setting device->kvm = NULL,
but that's also OK (again, just like vfio_device_fops_release). The setting
of device->kvm before open_device is technically done while holding the
group_rwsem, this is done to protect the group kvm value we are copying from,
and we should not be relying on that to protect the contents of device->kvm;
instead we assume this value will not change until after the device is closed
and while under the dev_set->lock.
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220627074119.523274-1-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In function vfio_dma_do_unmap(), we currently prevent process to unmap
vfio dma region whose mm_struct is different from the vfio_dma->task.
In our virtual machine scenario which is using kvm and qemu, this
judgement stops us from liveupgrading our qemu, which uses fork() &&
exec() to load the new binary but the new process cannot do the
VFIO_IOMMU_UNMAP_DMA action during vm exit because of this judgement.
This judgement is added in commit 8f0d5bb95f ("vfio iommu type1: Add
task structure to vfio_dma") for the security reason. But it seems that
no other task who has no family relationship with old and new process
can get the same vfio_dma struct here for the reason of resource
isolation. So this patch delete it.
Signed-off-by: Li Zhe <lizhe.67@bytedance.com>
Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca>
Link: https://lore.kernel.org/r/20220627035109.73745-1-lizhe.67@bytedance.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
On buffer resize failure, vfio_info_cap_add() will free the buffer,
report zero for the size, and return -ENOMEM. As additional
hardening, also clear the buffer pointer to prevent any chance of a
double free.
Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220629022948.55608-1-schspa@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As iommu_group_set_name() can fail, we should check the return value.
Signed-off-by: Liam Ni <zhiguangni01@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220625114239.9301-1-zhiguangni01@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio core checks whether the driver sets some migration op (e.g.
set_state/get_state) and accordingly calls its op.
However, currently mlx5 driver sets the above ops without regards to its
migration caps.
This might lead to unexpected usage/Oops if user space may call to the
above ops even if the driver doesn't support migration. As for example,
the migration state_mutex is not initialized in that case.
The cleanest way to manage that seems to split the migration ops from
the main device ops, this will let the driver setting them separately
from the main ops when it's applicable.
As part of that, validate ops construction on registration and include a
check for VFIO_MIGRATION_STOP_COPY since the uAPI claims it must be set
in migration_flags.
HISI driver was changed as well to match this scheme.
This scheme may enable down the road to come with some extra group of
ops (e.g. DMA log) that can be set without regards to the other options
based on driver caps.
Fixes: 6fadb02126 ("vfio/mlx5: Implement vfio_pci driver for mlx5 devices")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220628155910.171454-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Protect mlx5vf_disable_fds() upon close device to be called under the
state mutex as done in all other places.
This will prevent a race with any other flow which calls
mlx5vf_disable_fds() as of health/recovery upon
MLX5_PF_NOTIFY_DISABLE_VF event.
Encapsulate this functionality in a separate function named
mlx5vf_cmd_close_migratable() to consider migration caps and for further
usage upon close device.
Fixes: 6fadb02126 ("vfio/mlx5: Implement vfio_pci driver for mlx5 devices")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220628155910.171454-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As vfio_register_iommu_driver() can fail, we should check the return value.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220622045651.5416-1-liubo03@inspur.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use the new interface to check the capabilities for our device
specifically.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4ea5eb64246f1ee188d1a61c3e93b37756932eb7.1656092606.git.robin.murphy@arm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since IOMMU groups are mandatory for drivers to support, it stands to
reason that any device which has been successfully added to a group
must be on a bus supported by that IOMMU driver, and therefore a domain
viable for any device in the group must be viable for all devices in
the group. This already has to be the case for the IOMMU API's internal
default domain, for instance. Thus even if the group contains devices on
different buses, that can only mean that the IOMMU driver actually
supports such an odd topology, and so without loss of generality we can
expect the bus type of any device in a group to be suitable for IOMMU
API calls.
Furthermore, scrutiny reveals a lack of protection for the bus being
removed while vfio_iommu_type1_attach_group() is using it; the reference
that VFIO holds on the iommu_group ensures that data remains valid, but
does not prevent the group's membership changing underfoot.
We can address both concerns by recycling vfio_bus_type() into some
superficially similar logic to indirect the IOMMU API calls themselves.
Each call is thus protected from races by the IOMMU group's own locking,
and we no longer need to hold group-derived pointers beyond that scope.
It also gives us an easy path for the IOMMU API's migration of bus-based
interfaces to device-based, of which we can already take the first step
with device_iommu_capable(). As with domains, any capability must in
practice be consistent for devices in a given group - and after all it's
still the same capability which was expected to be consistent across an
entire bus! - so there's no need for any complicated validation.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/194a12d3434d7b38f84fa96503c7664451c8c395.1656092606.git.robin.murphy@arm.com
[aw: add comment to vfio_iommu_device_capable()]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The use of 'extern' in function prototypes has been disrecommended in
the kernel coding style for several years now, remove them from all vfio
related files so contributors no longer need to decide between style and
consistency.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/165471414407.203056.474032786990662279.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Console drivers can create conflicts with PCI resources resulting in
userspace getting mmap failures to memory BARs. This is especially
evident when trying to re-use the system primary console for userspace
drivers. Use the aperture helpers to remove these conflicts.
v3:
* call aperture_remove_conflicting_pci_devices()
Reported-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-4-tzimmermann@suse.de
- Improvements to mlx5 vfio-pci variant driver, including support
for parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API
to use vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA
ownership (Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and
kvm association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
-----BEGIN PGP SIGNATURE-----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=etEI
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
Including:
- Intel VT-d driver updates
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU
legacy binding
- Minor cleanups
- Patches to fix a BUG_ON in the vfio_iommu_group_notifier
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group
is either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Patches to make forcing of cache-coherent DMA more coherent
between IOMMU drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=W0hj
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
Rather than relying on a notifier for associating the KVM with
the group, let's assume that the association has already been
made prior to device_open. The first time a device is opened
associate the group KVM with the device.
This fixes a user-triggerable oops in GVT.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://lore.kernel.org/r/20220519183311.582380-2-mjrosato@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When the iommu series adding driver_managed_dma was rebased it missed that
new VFIO drivers were added and did not update them too.
Without this vfio will claim the groups are not viable.
Add driver_managed_dma to mlx5 and hisi.
Fixes: 70693f4708 ("vfio: Set DMA ownership for VFIO devices")
Reported-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-f9dfa642fab0+2b3-vfio_managed_dma_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since asserting dma ownership now causes the group to have its DMA blocked
the iommu layer requires a working iommu. This means the dma_owner APIs
cannot be used on the fake groups that VFIO creates. Test for this and
avoid calling them.
Otherwise asserting dma ownership will fail for VFIO mdev devices as a
BLOCKING iommu_domain cannot be allocated due to the NULL iommu ops.
Fixes: 0286300e60 ("iommu: iommu_group_claim_dma_owner() must always assign a domain")
Reported-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/0-v1-9cfc47edbcd4+13546-vfio_dma_owner_fix_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, there is very limited power management support
available in the upstream vfio_pci_core based drivers. If there
are no users of the device, then the PCI device will be moved into
D3hot state by writing directly into PCI PM registers. This D3hot
state help in saving power but we can achieve zero power consumption
if we go into the D3cold state. The D3cold state cannot be possible
with native PCI PM. It requires interaction with platform firmware
which is system-specific. To go into low power states (including D3cold),
the runtime PM framework can be used which internally interacts with PCI
and platform firmware and puts the device into the lowest possible
D-States.
This patch registers vfio_pci_core based drivers with the
runtime PM framework.
1. The PCI core framework takes care of most of the runtime PM
related things. For enabling the runtime PM, the PCI driver needs to
decrement the usage count and needs to provide 'struct dev_pm_ops'
at least. The runtime suspend/resume callbacks are optional and needed
only if we need to do any extra handling. Now there are multiple
vfio_pci_core based drivers. Instead of assigning the
'struct dev_pm_ops' in individual parent driver, the vfio_pci_core
itself assigns the 'struct dev_pm_ops'. There are other drivers where
the 'struct dev_pm_ops' is being assigned inside core layer
(For example, wlcore_probe() and some sound based driver, etc.).
2. This patch provides the stub implementation of 'struct dev_pm_ops'.
The subsequent patch will provide the runtime suspend/resume
callbacks. All the config state saving, and PCI power management
related things will be done by PCI core framework itself inside its
runtime suspend/resume callbacks (pci_pm_runtime_suspend() and
pci_pm_runtime_resume()).
3. Inside pci_reset_bus(), all the devices in dev_set needs to be
runtime resumed. vfio_pci_dev_set_pm_runtime_get() will take
care of the runtime resume and its error handling.
4. Inside vfio_pci_core_disable(), the device usage count always needs
to be decremented which was incremented in vfio_pci_core_enable().
5. Since the runtime PM framework will provide the same functionality,
so directly writing into PCI PM config register can be replaced with
the use of runtime PM routines. Also, the use of runtime PM can help
us in more power saving.
In the systems which do not support D3cold,
With the existing implementation:
// PCI device
# cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
D3hot
// upstream bridge
# cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
D0
With runtime PM:
// PCI device
# cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
D3hot
// upstream bridge
# cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
D3hot
So, with runtime PM, the upstream bridge or root port will also go
into lower power state which is not possible with existing
implementation.
In the systems which support D3cold,
// PCI device
# cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
D3hot
// upstream bridge
# cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
D0
With runtime PM:
// PCI device
# cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
D3cold
// upstream bridge
# cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
D3cold
So, with runtime PM, both the PCI device and upstream bridge will
go into D3cold state.
6. If 'disable_idle_d3' module parameter is set, then also the runtime
PM will be enabled, but in this case, the usage count should not be
decremented.
7. vfio_pci_dev_set_try_reset() return value is unused now, so this
function return type can be changed to void.
8. Use the runtime PM API's in vfio_pci_core_sriov_configure().
The device can be in low power state either with runtime
power management (when there is no user) or PCI_PM_CTRL register
write by the user. In both the cases, the PF should be moved to
D0 state. For preventing any runtime usage mismatch, pci_num_vf()
has been called explicitly during disable.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220518111612.16985-5-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If any PME event will be generated by PCI, then it will be mostly
handled in the host by the root port PME code. For example, in the case
of PCIe, the PME event will be sent to the root port and then the PME
interrupt will be generated. This will be handled in
drivers/pci/pcie/pme.c at the host side. Inside this, the
pci_check_pme_status() will be called where PME_Status and PME_En bits
will be cleared. So, the guest OS which is using vfio-pci device will
not come to know about this PME event.
To handle these PME events inside guests, we need some framework so
that if any PME events will happen, then it needs to be forwarded to
virtual machine monitor. We can virtualize PME related registers bits
and initialize these bits to zero so vfio-pci device user will assume
that it is not capable of asserting the PME# signal from any power state.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220518111612.16985-4-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
According to [PCIe v5 9.6.2] for PF Device Power Management States
"The PF's power management state (D-state) has global impact on its
associated VFs. If a VF does not implement the Power Management
Capability, then it behaves as if it is in an equivalent
power state of its associated PF.
If a VF implements the Power Management Capability, the Device behavior
is undefined if the PF is placed in a lower power state than the VF.
Software should avoid this situation by placing all VFs in lower power
state before lowering their associated PF's power state."
From the vfio driver side, user can enable SR-IOV when the PF is in D3hot
state. If VF does not implement the Power Management Capability, then
the VF will be actually in D3hot state and then the VF BAR access will
fail. If VF implements the Power Management Capability, then VF will
assume that its current power state is D0 when the PF is D3hot and
in this case, the behavior is undefined.
To support PF power management, we need to create power management
dependency between PF and its VF's. The runtime power management support
may help with this where power management dependencies are supported
through device links. But till we have such support in place, we can
disallow the PF to go into low power state, if PF has VF enabled.
There can be a case, where user first enables the VF's and then
disables the VF's. If there is no user of PF, then the PF can put into
D3hot state again. But with this patch, the PF will still be in D0
state after disabling VF's since detecting this case inside
vfio_pci_core_sriov_configure() requires access to
struct vfio_device::open_count along with its locks. But the subsequent
patches related to runtime PM will handle this case since runtime PM
maintains its own usage count.
Also, vfio_pci_core_sriov_configure() can be called at any time
(with and without vfio pci device user), so the power state change
and SR-IOV enablement need to be protected with the required locks.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220518111612.16985-3-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
According to [PCIe v5 5.3.1.4.1] for D3hot state
"Configuration and Message requests are the only TLPs accepted by a
Function in the D3Hot state. All other received Requests must be
handled as Unsupported Requests, and all received Completions may
optionally be handled as Unexpected Completions."
Currently, if the vfio PCI device has been put into D3hot state and if
user makes non-config related read/write request in D3hot state, these
requests will be forwarded to the host and this access may cause
issues on a few systems.
This patch leverages the memory-disable support added in commit
'abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on
disabled memory")' to generate page fault on mmap access and
return error for the direct read/write. If the device is D3hot state,
then the error will be returned for MMIO access. The IO access generally
does not make the system unresponsive so the IO access can still happen
in D3hot state. The default value should be returned in this case
without bringing down the complete system.
Also, the power related structure fields need to be protected so
we can use the same 'memory_lock' to protect these fields also.
This protection is mainly needed when user changes the PCI
power state by writing into PCI_PM_CTRL register.
vfio_lock_and_set_power_state() wrapper function will take the
required locks and then it will invoke the vfio_pci_set_power_state().
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220518111612.16985-2-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that everything is fully locked there is no need for container_users
to remain as an atomic, change it to an unsigned int.
Use 'if (group->container)' as the test to determine if the container is
present or not instead of using container_users.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/6-v2-d035a1842d81+1bf-vfio_group_locking_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Once userspace opens a group FD it is prevented from opening another
instance of that same group FD until all the prior group FDs and users of
the container are done.
The first is done trivially by checking the group->opened during group FD
open.
However, things get a little weird if userspace creates a device FD and
then closes the group FD. The group FD still cannot be re-opened, but this
time it is because the group->container is still set and container_users
is elevated by the device FD.
Due to this mismatched lifecycle we have the
vfio_group_try_dissolve_container() which tries to auto-free a container
after the group FD is closed but the device FD remains open.
Instead have the device FD hold onto a reference to the single group
FD. This directly prevents vfio_group_fops_release() from being called
when any device FD exists and makes the lifecycle model more
understandable.
vfio_group_try_dissolve_container() is removed as the only place a
container is auto-deleted is during vfio_group_fops_release(). At this
point the container_users is either 1 or 0 since all device FDs must be
closed.
Change group->opened to group->opened_file which points to the single
struct file * that is open for the group. If the group->open_file is
NULL then group->container == NULL.
If all device FDs have closed then the group's notifier list must be
empty.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/5-v2-d035a1842d81+1bf-vfio_group_locking_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is necessary to avoid various user triggerable races, for instance
racing SET_CONTAINER/UNSET_CONTAINER:
ioctl(VFIO_GROUP_SET_CONTAINER)
ioctl(VFIO_GROUP_UNSET_CONTAINER)
vfio_group_unset_container
int users = atomic_cmpxchg(&group->container_users, 1, 0);
// users == 1 container_users == 0
__vfio_group_unset_container(group);
container = group->container;
vfio_group_set_container()
if (!atomic_read(&group->container_users))
down_write(&container->group_lock);
group->container = container;
up_write(&container->group_lock);
down_write(&container->group_lock);
group->container = NULL;
up_write(&container->group_lock);
vfio_container_put(container);
/* woops we lost/leaked the new container */
This can then go on to NULL pointer deref since container == 0 and
container_users == 1.
Wrap all touches of container, except those on a performance path with a
known open device, with the group_rwsem.
The only user of vfio_group_add_container_user() holds the user count for
a simple operation, change it to just hold the group_lock over the
operation and delete vfio_group_add_container_user(). Containers now only
gain a user when a device FD is opened.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/4-v2-d035a1842d81+1bf-vfio_group_locking_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The split follows the pairing with the destroy functions:
- vfio_group_get_device_fd() destroyed by close()
- vfio_device_open() destroyed by vfio_device_fops_release()
- vfio_device_assign_container() destroyed by
vfio_group_try_dissolve_container()
The next patch will put a lock around vfio_device_assign_container().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/3-v2-d035a1842d81+1bf-vfio_group_locking_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is not a performance path, just use the group_rwsem to protect the
value.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/2-v2-d035a1842d81+1bf-vfio_group_locking_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Without locking userspace can trigger a UAF by racing
KVM_DEV_VFIO_GROUP_DEL with VFIO_GROUP_GET_DEVICE_FD:
CPU1 CPU2
ioctl(KVM_DEV_VFIO_GROUP_DEL)
ioctl(VFIO_GROUP_GET_DEVICE_FD)
vfio_group_get_device_fd
open_device()
intel_vgpu_open_device()
vfio_register_notifier()
vfio_register_group_notifier()
blocking_notifier_call_chain(&group->notifier,
VFIO_GROUP_NOTIFY_SET_KVM, group->kvm);
set_kvm()
group->kvm = NULL
close()
kfree(kvm)
intel_vgpu_group_notifier()
vdev->kvm = data
[..]
kvm_get_kvm(vgpu->kvm);
// UAF!
Add a simple rwsem in the group to protect the kvm while the notifier is
using it.
Note this doesn't fix the race internal to i915 where userspace can
trigger two VFIO_GROUP_NOTIFY_SET_KVM's before we reach a consumer of
vgpu->kvm and trigger this same UAF, it just makes the notifier
self-consistent.
Fixes: ccd46dbae7 ("vfio: support notifier chain in vfio_group")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/1-v2-d035a1842d81+1bf-vfio_group_locking_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIO PCI does a security check as part of hot reset to prove that the user
has permission to manipulate all the devices that will be impacted by the
reset.
Use a new API vfio_file_has_dev() to perform this security check against
the struct file directly and remove the vfio_group from VFIO PCI.
Since VFIO PCI was the last user of vfio_group_get_external_user() and
vfio_group_put_external_user() remove it as well.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Just change the argument from struct vfio_group to struct file *.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Instead of a general extension check change the function into a limited
test if the iommu_domain has enforced coherency, which is the only thing
kvm needs to query.
Make the new op self contained by properly refcounting the container
before touching it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_group_fops_open() ensures there is only ever one struct file open for
any struct vfio_group at any time:
/* Do we need multiple instances of the group open? Seems not. */
opened = atomic_cmpxchg(&group->opened, 0, 1);
if (opened) {
vfio_group_put(group);
return -EBUSY;
Therefor the struct file * can be used directly to search the list of VFIO
groups that KVM keeps instead of using the
vfio_external_group_match_file() callback to try to figure out if the
passed in FD matches the list or not.
Delete vfio_external_group_match_file().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The only caller wants to get a pointer to the struct iommu_group
associated with the VFIO group file. Instead of returning the group ID
then searching sysfs for that string to get the struct iommu_group just
directly return the iommu_group pointer already held by the vfio_group
struct.
It already has a safe lifetime due to the struct file kref, the vfio_group
and thus the iommu_group cannot be destroyed while the group file is open.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that the iommu core takes care of isolation there is no race between
driver attach and container unset. Once iommu_group_release_dma_owner()
returns the device can immediately be re-used.
Remove this mechanism.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-a1e8791d795b+6b-vfio_container_q_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The last user of this function is in PCI callbacks that want to convert
their struct pci_dev to a vfio_device. Instead of searching use the
vfio_device available trivially through the drvdata.
When a callback in the device_driver is called, the caller must hold the
device_lock() on dev. The purpose of the device_lock is to prevent
remove() from being called (see __device_release_driver), and allow the
driver to safely interact with its drvdata without races.
The PCI core correctly follows this and holds the device_lock() when
calling error_detected (see report_error_detected) and
sriov_configure (see sriov_numvfs_store).
Further, since the drvdata holds a positive refcount on the vfio_device
any access of the drvdata, under the device_lock(), from a driver callback
needs no further protection or refcounting.
Thus the remark in the vfio_device_get_from_dev() comment does not apply
here, VFIO PCI drivers all call vfio_unregister_group_dev() from their
remove callbacks under the device_lock() and cannot race with the
remaining callers.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-c841817a0349+8f-vfio_get_from_dev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Having a consistent pointer in the drvdata will allow the next patch to
make use of the drvdata from some of the core code helpers.
Use a WARN_ON inside vfio_pci_core_register_device() to detect drivers
that miss this.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-c841817a0349+8f-vfio_get_from_dev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When the open_device() op is called the container_users is incremented and
held incremented until close_device(). Thus, so long as drivers call
functions within their open_device()/close_device() region they do not
need to worry about the container_users.
These functions can all only be called between open_device() and
close_device():
vfio_pin_pages()
vfio_unpin_pages()
vfio_dma_rw()
vfio_register_notifier()
vfio_unregister_notifier()
Eliminate the calls to vfio_group_add_container_user() and add
vfio_assert_device_open() to detect driver mis-use. This causes the
close_device() op to check device->open_count so always leave it elevated
while calling the op.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that callers have been updated to use the vfio_device APIs the driver
facing group interface is no longer used, delete it:
- vfio_group_get_external_user_from_dev()
- vfio_group_pin_pages()
- vfio_group_unpin_pages()
- vfio_group_iommu_domain()
--
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Every caller has a readily available vfio_device pointer, use that instead
of passing in a generic struct device. Change vfio_dma_rw() to take in the
struct vfio_device and move the container users that would have been held
by vfio_group_get_external_user_from_dev() to vfio_dma_rw() directly, like
vfio_pin/unpin_pages().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Every caller has a readily available vfio_device pointer, use that instead
of passing in a generic struct device. The struct vfio_device already
contains the group we need so this avoids complexity, extra refcountings,
and a confusing lifecycle model.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
All callers have a struct vfio_device trivially available, pass it in
directly and avoid calling the expensive vfio_group_get_from_dev().
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
IOMMU groups have been mandatory for some time now, so a device without
one is necessarily a device without any usable IOMMU, therefore the
iommu_present() check is redundant (or at best unhelpful).
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/537103bbd7246574f37f2c88704d7824a3a889f2.1649160714.git.robin.murphy@arm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
From Yishai:
This series improves mlx5 live migration driver in few aspects as of
below.
Refactor to enable running migration commands in parallel over the PF
command interface.
To achieve that we exposed from mlx5_core an API to let the VF be
notified before that the PF command interface goes down/up. (e.g. PF
reload upon health recovery).
Once having the above functionality in place mlx5 vfio doesn't need any
more to obtain the global PF lock upon using the command interface but
can rely on the above mechanism to be in sync with the PF.
This can enable parallel VFs migration over the PF command interface
from kernel driver point of view.
In addition,
Moved to use the PF async command mode for the SAVE state command.
This enables returning earlier to user space upon issuing successfully
the command and improve latency by let things run in parallel.
Alex, as this series touches mlx5_core we may need to send this in a
pull request format to VFIO to avoid conflicts before acceptance.
Link: https://lore.kernel.org/all/20220510090206.90374-1-yishaih@nvidia.com
Signed-of-by: Leon Romanovsky <leonro@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCYntY3AAKCRAp8NhrnBAZ
scRWAP0QzEqg/Xqk/geUAQ3dliFrA2DZJm8v9B3x5tA5nEAazAD9HqC17MvDzY8T
6KBP7G37JNg2NCkxnKnt2gCIT+O4lgA=
=zwWT
-----END PGP SIGNATURE-----
Merge tag 'mlx5-lm-parallel' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into v5.19/vfio/next
Improve mlx5 live migration driver
From Yishai:
This series improves mlx5 live migration driver in few aspects as of
below.
Refactor to enable running migration commands in parallel over the PF
command interface.
To achieve that we exposed from mlx5_core an API to let the VF be
notified before that the PF command interface goes down/up. (e.g. PF
reload upon health recovery).
Once having the above functionality in place mlx5 vfio doesn't need any
more to obtain the global PF lock upon using the command interface but
can rely on the above mechanism to be in sync with the PF.
This can enable parallel VFs migration over the PF command interface
from kernel driver point of view.
In addition,
Moved to use the PF async command mode for the SAVE state command.
This enables returning earlier to user space upon issuing successfully
the command and improve latency by let things run in parallel.
Alex, as this series touches mlx5_core we may need to send this in a
pull request format to VFIO to avoid conflicts before acceptance.
Link: https://lore.kernel.org/all/20220510090206.90374-1-yishaih@nvidia.com
Signed-of-by: Leon Romanovsky <leonro@nvidia.com>
Use the PF asynchronous command mode for the SAVE state command.
This enables returning earlier to user space upon issuing successfully
the command and improve latency by let things run in parallel.
Link: https://lore.kernel.org/r/20220510090206.90374-5-yishaih@nvidia.com
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Refactor to enable different VFs to run their commands over the PF
command interface in parallel and to not block one each other.
This is done by not using the global PF lock that was used before but
relying on the VF attach/detach mechanism to sync.
Link: https://lore.kernel.org/r/20220510090206.90374-4-yishaih@nvidia.com
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Manage the VF attach/detach callback from the PF.
This lets the driver to enable parallel VFs migration as will be
introduced in the next patch.
As part of this, reorganize the VF is migratable code to be in a
separate function and rename it to be set_migratable() to match its
functionality.
Link: https://lore.kernel.org/r/20220510090206.90374-3-yishaih@nvidia.com
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
drm/i915 feature pull #2 for v5.19:
Features and functionality:
- Add first set of DG2 PCI IDs for "motherboard down" designs (Matt Roper)
- Add initial RPL-P PCI IDs as ADL-P subplatform (Matt Atwood)
Refactoring and cleanups:
- Power well refactoring and cleanup (Imre)
- GVT-g refactor and mdev API cleanup (Christoph, Jason, Zhi)
- DPLL refactoring and cleanup (Ville)
- VBT panel specific data parsing cleanup (Ville)
- Use drm_mode_init() for on-stack modes (Ville)
Fixes:
- Fix PSR state pipe A/B confusion by clearing more state on disable (José)
- Fix FIFO underruns caused by not taking DRAM channel into account (Vinod)
- Fix FBC flicker on display 11+ by enabling a workaround (José)
- Fix VBT seamless DRRS min refresh rate check (Ville)
- Fix panel type assumption on bogus VBT data (Ville)
- Fix panel data parsing for VBT that misses panel data pointers block (Ville)
- Fix spurious AUX timeout/hotplug handling on LTTPR links (Imre)
Merges:
- Backmerge drm-next (Jani)
- GVT changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87bkwbkkdo.fsf@intel.com
IOMMU_CACHE means that normal DMAs do not require any additional coherency
mechanism and is the basic uAPI that VFIO exposes to userspace. For
instance VFIO applications like DPDK will not work if additional coherency
operations are required.
Therefore check IOMMU_CAP_CACHE_COHERENCY like vdpa & usnic do before
allowing an IOMMU backed VFIO device to be created.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v3-2cf356649677+a32-intel_no_snoop_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU_CACHE means "normal DMA to this iommu_domain's IOVA should be cache
coherent" and is used by the DMA API. The definition allows for special
non-coherent DMA to exist - ie processing of the no-snoop flag in PCIe
TLPs - so long as this behavior is opt-in by the device driver.
The flag is mainly used by the DMA API to synchronize the IOMMU setting
with the expected cache behavior of the DMA master. eg based on
dev_is_dma_coherent() in some case.
For Intel IOMMU IOMMU_CACHE was redefined to mean 'force all DMA to be
cache coherent' which has the practical effect of causing the IOMMU to
ignore the no-snoop bit in a PCIe TLP.
x86 platforms are always IOMMU_CACHE, so Intel should ignore this flag.
Instead use the new domain op enforce_cache_coherency() which causes every
IOPTE created in the domain to have the no-snoop blocking behavior.
Reconfigure VFIO to always use IOMMU_CACHE and call
enforce_cache_coherency() to operate the special Intel behavior.
Remove the IOMMU_CACHE test from Intel IOMMU.
Ultimately VFIO plumbs the result of enforce_cache_coherency() back into
the x86 platform code through kvm_arch_register_noncoherent_dma() which
controls if the WBINVD instruction is available in the guest. No other
archs implement kvm_arch_register_noncoherent_dma() nor are there any
other known consumers of VFIO_DMA_CC_IOMMU that might be affected by the
user visible result change on non-x86 archs.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v3-2cf356649677+a32-intel_no_snoop_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu core and driver core have been enhanced to avoid unsafe driver
binding to a live group after iommu_group_set_dma_owner(PRIVATE_USER)
has been called. There's no need to register iommu group notifier. This
removes the iommu group notifer which contains BUG_ON() and WARN().
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220418005000.897664-11-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
commit 60720a0fc6 ("vfio: Add device tracking during unbind") added the
unbound list to plug a problem with KVM where KVM_DEV_VFIO_GROUP_DEL
relied on vfio_group_get_external_user() succeeding to return the
vfio_group from a group file descriptor. The unbound list allowed
vfio_group_get_external_user() to continue to succeed in edge cases.
However commit 5d6dee80a1 ("vfio: New external user group/file match")
deleted the call to vfio_group_get_external_user() during
KVM_DEV_VFIO_GROUP_DEL. Instead vfio_external_group_match_file() is used
to directly match the file descriptor to the group pointer.
This in turn avoids the call down to vfio_dev_viable() during
KVM_DEV_VFIO_GROUP_DEL and also avoids the trouble the first commit was
trying to fix.
There are no other users of vfio_dev_viable() that care about the time
after vfio_unregister_group_dev() returns, so simply delete the
unbound_list entirely.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220418005000.897664-10-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As DMA ownership is claimed for the iommu group when a VFIO group is
added to a VFIO container, the VFIO group viability is guaranteed as long
as group->container_users > 0. Remove those unnecessary group viability
checks which are only hit when group->container_users is not zero.
The only remaining reference is in GROUP_GET_STATUS, which could be called
at any time when group fd is valid. Here we just replace the
vfio_group_viable() by directly calling IOMMU core to get viability status.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220418005000.897664-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Claim group dma ownership when an IOMMU group is set to a container,
and release the dma ownership once the iommu group is unset from the
container.
This change disallows some unsafe bridge drivers to bind to non-ACS
bridges while devices under them are assigned to user space. This is an
intentional enhancement and possibly breaks some existing
configurations. The recommendation to such an affected user would be
that the previously allowed host bridge driver was unsafe for this use
case and to continue to enable assignment of devices within that group,
the driver should be unbound from the bridge device or replaced with the
pci-stub driver.
For any bridge driver, we consider it unsafe if it satisfies any of the
following conditions:
1) The bridge driver uses DMA. Calling pci_set_master() or calling any
kernel DMA API (dma_map_*() and etc.) is an indicate that the
driver is doing DMA.
2) If the bridge driver uses MMIO, it should be tolerant to hostile
userspace also touching the same MMIO registers via P2P DMA
attacks.
If the bridge driver turns out to be a safe one, it could be used as
before by setting the driver's .driver_managed_dma field, just like what
we have done in the pcieport driver.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220418005000.897664-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The device creator is supposed to use the dev.groups value to add sysfs
files before device_add is called, not call sysfs_create_files() after
device_add() returns. This creates a race with uevent delivery where the
extra attribute will not be visible.
This was being done because the groups had been co-opted by the mdev
driver, now that prior patches have moved the driver's groups to the
struct device_driver the dev.group is properly free for use here.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-34-hch@lst.de
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
The last useful member in this struct is the supported_type_groups, move
it to the mdev_driver and delete mdev_parent_ops.
Replace it with mdev_driver as an argument to mdev_register_device()
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-33-hch@lst.de
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
This is only used by one sample to print a fixed string that is pointless.
In general, having a device driver attach sysfs attributes to the parent
is horrific. This should never happen, and always leads to some kind of
liftime bug as it become very difficult for the sysfs attribute to go back
to any data owned by the device driver.
Remove the general mechanism to create this abuse.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-32-hch@lst.de
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Now that all mdev drivers directly create their own mdev_device driver and
directly register with the vfio core's vfio_device_ops this is all dead
code.
Delete vfio_mdev.c and the mdev_parent_ops members that are connected to
it.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-31-hch@lst.de
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
get_pf_vdev() tries to check if a PF is a VFIO PF by looking at the driver:
if (pci_dev_driver(physfn) != pci_dev_driver(vdev->pdev)) {
However now that we have multiple VF and PF drivers this is no longer
reliable.
This means that security tests realted to vf_token can be skipped by
mixing and matching different VFIO PCI drivers.
Instead of trying to use the driver core to find the PF devices maintain a
linked list of all PF vfio_pci_core_device's that we have called
pci_enable_sriov() on.
When registering a VF just search the list to see if the PF is present and
record the match permanently in the struct. PCI core locking prevents a PF
from passing pci_disable_sriov() while VF drivers are attached so the VFIO
owned PF becomes a static property of the VF.
In common cases where vfio does not own the PF the global list remains
empty and the VF's pointer is statically NULL.
This also fixes a lockdep splat from recursive locking of the
vfio_group::device_lock between vfio_device_get_from_name() and
vfio_device_get_from_dev(). If the VF and PF share the same group this
would deadlock.
Fixes: ff53edf6d6 ("vfio/pci: Split the pci_driver code out of vfio_pci_core.c")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v3-876570980634+f2e8-vfio_vf_token_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Register private handler for pci_error_handlers.reset_done and update
state accordingly.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20220308184902.2242-10-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VMs assigned with HiSilicon ACC VF devices can now perform live migration
if the VF devices are bind to the hisi_acc_vfio_pci driver.
Just like ACC PF/VF drivers this VFIO driver also make use of the HiSilicon
QM interface. QM stands for Queue Management which is a generic IP used by
ACC devices. It provides a generic PCIe interface for the CPU and the ACC
devices to share a group of queues.
QM integrated into an accelerator provides queue management service.
Queues can be assigned to PF and VFs, and queues can be controlled by
unified mailboxes and doorbells.
The QM driver (drivers/crypto/hisilicon/qm.c) provides generic
interfaces to ACC drivers to manage the QM.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20220308184902.2242-9-shameerali.kolothum.thodi@huawei.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
HiSilicon ACC VF device BAR2 region consists of both functional register
space and migration control register space. Unnecessarily exposing the
migration BAR region to the Guest has the potential to prevent/corrupt
the Guest migration.
Hence, introduce a separate struct vfio_device_ops for migration support
which will override the ioctl/read/write/mmap methods to hide the
migration region and limit the Guest access only to the functional
register space.
This will be used in subsequent patches when we add migration support
to the driver.
Please note that it is OK to export the entire VF BAR if migration is
not supported or required as this cannot affect the PF configurations.
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220308184902.2242-6-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add a vendor-specific vfio_pci driver for HiSilicon ACC devices.
This will be extended in subsequent patches to add support for VFIO
live migration feature.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220308184902.2242-5-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Register its own handler for pci_error_handlers.reset_done and update
state accordingly.
Link: https://lore.kernel.org/all/20220224142024.147653-16-yishaih@nvidia.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Expose vfio_pci_core_aer_err_detected() to be used by drivers as part of
their pci_error_handlers structure.
Next patch for mlx5 driver will use it.
Link: https://lore.kernel.org/all/20220224142024.147653-15-yishaih@nvidia.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
This patch adds support for vfio_pci driver for mlx5 devices.
It uses vfio_pci_core to register to the VFIO subsystem and then
implements the mlx5 specific logic in the migration area.
The migration implementation follows the definition from uapi/vfio.h and
uses the mlx5 VF->PF command channel to achieve it.
This patch implements the suspend/resume flows.
Link: https://lore.kernel.org/all/20220224142024.147653-14-yishaih@nvidia.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Expose migration commands over the device, it includes: suspend, resume,
get vhca id, query/save/load state.
As part of this adds the APIs and data structure that are needed to manage
the migration data.
Link: https://lore.kernel.org/all/20220224142024.147653-13-yishaih@nvidia.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The RUNNING_P2P state is designed to support multiple devices in the same
VM that are doing P2P transactions between themselves. When in RUNNING_P2P
the device must be able to accept incoming P2P transactions but should not
generate outgoing P2P transactions.
As an optional extension to the mandatory states it is defined as
in between STOP and RUNNING:
STOP -> RUNNING_P2P -> RUNNING -> RUNNING_P2P -> STOP
For drivers that are unable to support RUNNING_P2P the core code
silently merges RUNNING_P2P and RUNNING together. Unless driver support
is present, the new state cannot be used in SET_STATE.
Drivers that support this will be required to implement 4 FSM arcs
beyond the basic FSM. 2 of the basic FSM arcs become combination
transitions.
Compared to the v1 clarification, NDMA is redefined into FSM states and is
described in terms of the desired P2P quiescent behavior, noting that
halting all DMA is an acceptable implementation.
Link: https://lore.kernel.org/all/20220224142024.147653-11-yishaih@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Replace the existing region based migration protocol with an ioctl based
protocol. The two protocols have the same general semantic behaviors, but
the way the data is transported is changed.
This is the STOP_COPY portion of the new protocol, it defines the 5 states
for basic stop and copy migration and the protocol to move the migration
data in/out of the kernel.
Compared to the clarification of the v1 protocol Alex proposed:
https://lore.kernel.org/r/163909282574.728533.7460416142511440919.stgit@omen
This has a few deliberate functional differences:
- ERROR arcs allow the device function to remain unchanged.
- The protocol is not required to return to the original state on
transition failure. Instead userspace can execute an unwind back to
the original state, reset, or do something else without needing kernel
support. This simplifies the kernel design and should userspace choose
a policy like always reset, avoids doing useless work in the kernel
on error handling paths.
- PRE_COPY is made optional, userspace must discover it before using it.
This reflects the fact that the majority of drivers we are aware of
right now will not implement PRE_COPY.
- segmentation is not part of the data stream protocol, the receiver
does not have to reproduce the framing boundaries.
The hybrid FSM for the device_state is described as a Mealy machine by
documenting each of the arcs the driver is required to implement. Defining
the remaining set of old/new device_state transitions as 'combination
transitions' which are naturally defined as taking multiple FSM arcs along
the shortest path within the FSM's digraph allows a complete matrix of
transitions.
A new VFIO_DEVICE_FEATURE of VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE is
defined to replace writing to the device_state field in the region. This
allows returning a brand new FD whenever the requested transition opens
a data transfer session.
The VFIO core code implements the new feature and provides a helper
function to the driver. Using the helper the driver only has to
implement 6 of the FSM arcs and the other combination transitions are
elaborated consistently from those arcs.
A new VFIO_DEVICE_FEATURE of VFIO_DEVICE_FEATURE_MIGRATION is defined to
report the capability for migration and indicate which set of states and
arcs are supported by the device. The FSM provides a lot of flexibility to
make backwards compatible extensions but the VFIO_DEVICE_FEATURE also
allows for future breaking extensions for scenarios that cannot support
even the basic STOP_COPY requirements.
The VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE with the GET option (i.e.
VFIO_DEVICE_FEATURE_GET) can be used to read the current migration state
of the VFIO device.
Data transfer sessions are now carried over a file descriptor, instead of
the region. The FD functions for the lifetime of the data transfer
session. read() and write() transfer the data with normal Linux stream FD
semantics. This design allows future expansion to support poll(),
io_uring, and other performance optimizations.
The complicated mmap mode for data transfer is discarded as current qemu
doesn't take meaningful advantage of it, and the new qemu implementation
avoids substantially all the performance penalty of using a read() on the
region.
Link: https://lore.kernel.org/all/20220224142024.147653-10-yishaih@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Invoke a new device op 'device_feature' to handle just the data array
portion of the command. This lifts the ioctl validation to the core code
and makes it simpler for either the core code, or layered drivers, to
implement their own feature values.
Provide vfio_check_feature() to consolidate checking the flags/etc against
what the driver supports.
Link: https://lore.kernel.org/all/20220224142024.147653-9-yishaih@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then the
current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition. For reset-related
functionalities, vfio driver uses PCI reset API's. These
API's internally change the PCI power state back to D0 first if
the device power state is non-D0. This state change to D0 will happen
without the involvement of vfio driver.
Let's consider the following example:
1. The device is in D3hot.
2. User invokes VFIO_DEVICE_RESET ioctl.
3. pci_try_reset_function() will be called which internally
invokes pci_dev_save_and_disable().
4. pci_set_power_state(dev, PCI_D0) will be called first.
5. pci_save_state() will happen then.
Now, for the devices which has NoSoftRst-, the pci_set_power_state()
can trigger soft reset and the original PCI config state will be lost
at step (4) and this state cannot be restored again. This original PCI
state can include any setting which is performed by SBIOS or host
linux kernel (for example LTR, ASPM L1 substates, etc.). When this
soft reset will be triggered, then all these settings will be reset,
and the device state saved at step (5) will also have this setting
cleared so it cannot be restored. Since the vfio driver only exposes
limited PCI capabilities to its user, so the vfio driver user also
won't have the option to save and restore these capabilities state
either and these original settings will be permanently lost.
For pci_reset_bus() also, we can have the above situation.
The other functions/devices can be in D3hot and the reset will change
the power state of all devices to D0 without the involvement of vfio
driver.
So, before calling any reset-related API's, we need to make sure that
the device state is D0. This is mainly to preserve the state around
soft reset.
For vfio_pci_core_disable(), we use __pci_reset_function_locked()
which internally can use pci_pm_reset() for the function reset.
pci_pm_reset() requires the device power state to be in D0, otherwise
it returns error.
This patch changes the device power state to D0 by invoking
vfio_pci_set_power_state() explicitly before calling any reset related
API's.
Fixes: 51ef3a004b ("vfio/pci: Restore device state on PM transition")
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220217122107.22434-3-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then
the current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition.
For saving the PCI state locally, pci_store_saved_state() is being
used and the pci_load_and_free_saved_state() will free the allocated
memory.
But for reset related IOCTLs, vfio driver calls PCI reset-related
API's which will internally change the PCI power state back to D0. So,
when the guest resumes, then it will get the current state as D0 and it
will skip the call to vfio_pci_set_power_state() for changing the
power state to D0 explicitly. In this case, the memory pointed by
'pm_save' will never be freed. In a malicious sequence, the state changing
to D3hot followed by VFIO_DEVICE_RESET/VFIO_DEVICE_PCI_HOT_RESET can be
run in a loop and it can cause an OOM situation.
This patch frees the earlier allocated memory first before overwriting
'pm_save' to prevent the mentioned memory leak.
Fixes: 51ef3a004b ("vfio/pci: Restore device state on PM transition")
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220217122107.22434-2-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Variables allocated by kvzalloc should not be freed by kfree.
Because they may be allocated by vmalloc.
So we replace kfree with kvfree here.
Fixes: d6a4c18566 ("vfio iommu: Implementation of ioctl for dirty pages tracking")
Signed-off-by: Jiacheng Shi <billsjc@sjtu.edu.cn>
Link: https://lore.kernel.org/r/20211212091600.2560-1-billsjc@sjtu.edu.cn
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Sparse warns:
sparse warnings: (new ones prefixed by >>)
>> drivers/vfio/pci/vfio_pci_igd.c:146:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned short [addressable] [usertype] val @@ got restricted __le16 [usertype] @@
drivers/vfio/pci/vfio_pci_igd.c:146:21: sparse: expected unsigned short [addressable] [usertype] val
drivers/vfio/pci/vfio_pci_igd.c:146:21: sparse: got restricted __le16 [usertype]
>> drivers/vfio/pci/vfio_pci_igd.c:161:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [addressable] [usertype] val @@ got restricted __le32 [usertype] @@
drivers/vfio/pci/vfio_pci_igd.c:161:21: sparse: expected unsigned int [addressable] [usertype] val
drivers/vfio/pci/vfio_pci_igd.c:161:21: sparse: got restricted __le32 [usertype]
drivers/vfio/pci/vfio_pci_igd.c:176:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned short [addressable] [usertype] val @@ got restricted __le16 [usertype] @@
drivers/vfio/pci/vfio_pci_igd.c:176:21: sparse: expected unsigned short [addressable] [usertype] val
drivers/vfio/pci/vfio_pci_igd.c:176:21: sparse: got restricted __le16 [usertype]
These are due to trying to use an unsigned to store the result of
a cpu_to_leXX() conversion. These are small variables, so pointer
tricks are wasteful and casting just generates different sparse
warnings. Store to and copy results from a separate little endian
variable.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202111290026.O3vehj03-lkp@intel.com/
Link: https://lore.kernel.org/r/163840226123.138003.7668320168896210328.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Storing a pointer to the MSI descriptor just to track the Linux interrupt
number is daft. Just store the interrupt number and be done with it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221815.207838579@linutronix.de
This is to fix incorrect pointer arithmetic which caused wrong
OpRegion version returned, then VM driver got error to get wanted
VBT block. We need to be safe to return correct data, so force
pointer type for byte access.
Fixes: 49ba1a2976 ("vfio/pci: Add OpRegion 2.0+ Extended VBT support.")
Cc: Colin Xu <colin.xu@gmail.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: "Xu, Terrence" <terrence.xu@intel.com>
Cc: "Gao, Fred" <fred.gao@intel.com>
Acked-by: Colin Xu <colin.xu@gmail.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://lore.kernel.org/r/20211125051328.3359902-1-zhenyuw@linux.intel.com
[aw: line wrap]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio.c abuses (misuses) "/**", which indicates the beginning of
kernel-doc notation in the kernel tree. This causes a bunch of
kernel-doc complaints about this source file, so quieten all of
them by changing all "/**" to "/*".
vfio.c:236: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* IOMMU driver registration
vfio.c:236: warning: missing initial short description on line:
* IOMMU driver registration
vfio.c:295: warning: expecting prototype for Container objects(). Prototype was for vfio_container_get() instead
vfio.c:317: warning: expecting prototype for Group objects(). Prototype was for __vfio_group_get_from_iommu() instead
vfio.c:496: warning: Function parameter or member 'device' not described in 'vfio_device_put'
vfio.c:496: warning: expecting prototype for Device objects(). Prototype was for vfio_device_put() instead
vfio.c:599: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Async device support
vfio.c:599: warning: missing initial short description on line:
* Async device support
vfio.c:693: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO driver API
vfio.c:693: warning: missing initial short description on line:
* VFIO driver API
vfio.c:835: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Get a reference to the vfio_device for a device. Even if the
vfio.c:835: warning: missing initial short description on line:
* Get a reference to the vfio_device for a device. Even if the
vfio.c:969: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO base fd, /dev/vfio/vfio
vfio.c:969: warning: missing initial short description on line:
* VFIO base fd, /dev/vfio/vfio
vfio.c:1187: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO Group fd, /dev/vfio/$GROUP
vfio.c:1187: warning: missing initial short description on line:
* VFIO Group fd, /dev/vfio/$GROUP
vfio.c:1540: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO Device fd
vfio.c:1540: warning: missing initial short description on line:
* VFIO Device fd
vfio.c:1615: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* External user API, exported by symbols to be linked dynamically.
vfio.c:1615: warning: missing initial short description on line:
* External user API, exported by symbols to be linked dynamically.
vfio.c:1663: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* External user API, exported by symbols to be linked dynamically.
vfio.c:1663: warning: missing initial short description on line:
* External user API, exported by symbols to be linked dynamically.
vfio.c:1742: warning: Function parameter or member 'caps' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: Function parameter or member 'size' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: Function parameter or member 'id' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: Function parameter or member 'version' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: expecting prototype for Sub(). Prototype was for vfio_info_cap_add() instead
vfio.c:2276: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Module/class support
vfio.c:2276: warning: missing initial short description on line:
* Module/class support
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/r/38a9cb92-a473-40bf-b8f9-85cc5cfc2da4@infradead.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Modernize how vfio is creating the group char dev and sysfs presence.
These days drivers with state should use cdev_device_add() and
cdev_device_del() to manage the cdev and sysfs lifetime.
This API requires the driver to put the struct device and struct cdev
inside its state struct (vfio_group), and then use the usual
device_initialize()/cdev_device_add()/cdev_device_del() sequence.
Split the code to make this possible:
- vfio_group_alloc()/vfio_group_release() are pair'd functions to
alloc/free the vfio_group. release is done under the struct device
kref.
- vfio_create_group()/vfio_group_put() are pairs that manage the
sysfs/cdev lifetime. Once the uses count is zero the vfio group's
userspace presence is destroyed.
- The IDR is replaced with an IDA. container_of(inode->i_cdev)
is used to get back to the vfio_group during fops open. The IDA
assigns unique minor numbers.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v3-2fdfe4ca2cc6+18c-vfio_group_cdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The next patch adds a struct device to the struct vfio_group, and it is
confusing/bad practice to have two krefs in the same struct. This kref is
controlling the period when the vfio_group is registered in sysfs, and
visible in the internal lookup. Switch it to a refcount_t instead.
The refcount_dec_and_mutex_lock() is still required because we need
atomicity of the list searches and sysfs presence.
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v3-2fdfe4ca2cc6+18c-vfio_group_cdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If vfio_create_group() searches the group list and returns an already
existing group it does not put back the iommu_group reference that the
caller passed in.
Change the semantic of vfio_create_group() to not move the reference in
from the caller, but instead obtain a new reference inside and leave the
caller's reference alone. The two callers must now call iommu_group_put().
This is an unlikely race as the only caller that could hit it has already
searched the group list before attempting to create the group.
Fixes: cba3345cc4 ("vfio: VFIO core")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v3-2fdfe4ca2cc6+18c-vfio_group_cdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Split vfio_group_get_from_iommu() into __vfio_group_get_from_iommu() so
that vfio_create_group() can call it to consolidate this duplicated code.
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v3-2fdfe4ca2cc6+18c-vfio_group_cdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
iommu_group_register_notifier()/iommu_group_unregister_notifier() are
built using a blocking_notifier_chain which integrates a rwsem. The
notifier function cannot be running outside its registration.
When considering how the notifier function interacts with create/destroy
of the group there are two fringe cases, the notifier starts before
list_add(&vfio.group_list) and the notifier runs after the kref
becomes 0.
Prior to vfio_create_group() unlocking and returning we have
container_users == 0
device_list == empty
And this cannot change until the mutex is unlocked.
After the kref goes to zero we must also have
container_users == 0
device_list == empty
Both are required because they are balanced operations and a 0 kref means
some caller became unbalanced. Add the missing assertion that
container_users must be zero as well.
These two facts are important because when checking each operation we see:
- IOMMU_GROUP_NOTIFY_ADD_DEVICE
Empty device_list avoids the WARN_ON in vfio_group_nb_add_dev()
0 container_users ends the call
- IOMMU_GROUP_NOTIFY_BOUND_DRIVER
0 container_users ends the call
Finally, we have IOMMU_GROUP_NOTIFY_UNBOUND_DRIVER, which only deletes
items from the unbound list. During creation this list is empty, during
kref == 0 nothing can read this list, and it will be freed soon.
Since the vfio_group_release() doesn't hold the appropriate lock to
manipulate the unbound_list and could race with the notifier, move the
cleanup to directly before the kfree.
This allows deleting all of the deferred group put code.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-2fdfe4ca2cc6+18c-vfio_group_cdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Due to historical reason, some legacy shipped system doesn't follow
OpRegion 2.1 spec but still stick to OpRegion 2.0, in which the extended
VBT is not contiguous after OpRegion in physical address, but any
location pointed by RVDA via absolute address. Also although current
OpRegion 2.1+ systems appears that the extended VBT follows OpRegion,
RVDA is the relative address to OpRegion head, the extended VBT location
may change to non-contiguous to OpRegion. In both cases, it's impossible
to map a contiguous range to hold both OpRegion and the extended VBT and
expose via one vfio region.
The only difference between OpRegion 2.0 and 2.1 is where extended
VBT is stored: For 2.0, RVDA is the absolute address of extended VBT
while for 2.1, RVDA is the relative address of extended VBT to OpRegion
baes, and there is no other difference between OpRegion 2.0 and 2.1.
To support the non-contiguous region case as described, the updated read
op will patch OpRegion version and RVDA on-the-fly accordingly. So that
from vfio igd OpRegion view, only 2.1+ with contiguous extended VBT
after OpRegion is exposed, regardless the underneath host OpRegion is
2.0 or 2.1+. The mechanism makes it possible to support legacy OpRegion
2.0 extended VBT systems with on the market, and support OpRegion 2.1+
where the extended VBT isn't contiguous after OpRegion.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Swee Yee Fonn <swee.yee.fonn@intel.com>
Cc: Fred Gao <fred.gao@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Link: https://lore.kernel.org/r/20211012124855.52463-1-colin.xu@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
IS_IOMMU_CAP_DOMAIN_IN_CONTAINER just obsfucated the checks being
performed, so open code it in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-16-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The external_domain concept rather misleading and not actually needed.
Replace it with a list of emulated groups in struct vfio_iommu.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-15-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Ensure pgsize_bitmap is always valid by initializing it to PAGE_MASK
in vfio_iommu_type1_open and remove the now pointless update for
the external domain case in vfio_iommu_type1_attach_group, which was
just setting pgsize_bitmap to PAGE_MASK when only external domains
were attached.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210924155705.4258-14-hch@lst.de
[aw: s/ULONG_MAX/PAGE_MASK/ per discussion in link]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Unlike the the type1 IOMMU backend, the SPAPR one does not contain any
support for the magic non-IOMMU backed iommu_group used by mediated
devices, so reject them in ->attach_group.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-13-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass the group flags to ->attach_group and remove the messy check for
the bus type.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-12-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The iommu_device field in struct mdev_device has never been used
since it was added more than 2 years ago.
This is a manual revert of commit 7bd50f0cd2
("vfio/type1: Add domain at(de)taching group helpers").
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-11-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Create a new private drivers/vfio/vfio.h header for the interface between
the VFIO core and the iommu drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-10-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The read, write and mmap methods are never implemented, so remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-9-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reuse the logic in vfio_noiommu_group_alloc to allocate a fake
single-device iommu group for mediated devices by factoring out a common
function, and replacing the noiommu boolean field in struct vfio_group
with an enum to distinguish the three different kinds of groups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-8-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Just pass a noiommu argument to vfio_create_group and set up the
->noiommu flag directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-7-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Split the actual noiommu group creation from vfio_iommu_group_get into a
new helper, and open code the rest of vfio_iommu_group_get in its only
caller. This creates an entirely separate and clear code path for the
noiommu group creation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-6-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Factor out a helper to find or allocate the vfio_group to reduce the
spagetthi code in vfio_register_group_dev a little.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-5-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_noiommu_attach_group has two callers:
1) __vfio_container_attach_groups is called by vfio_ioctl_set_iommu,
which just called vfio_iommu_driver_allowed
2) vfio_group_set_container requires already checks ->noiommu on the
vfio_group, which is propagated from the iommudata in
vfio_create_group
so this check is entirely superflous and can be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-4-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Factor out a little helper to make the checks for the noiommu driver less
ugly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-3-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We don't need to hold a reference to the group in the driver as well as
obtain a reference to the same group as the first thing
vfio_register_group_dev() does.
Since the drivers never use the group move this all into the core code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20210924155705.4258-2-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently when a fsl-mc device is reset, the entire DPRC container
is reset which is very inefficient because the devices within a
container will be reset multiple times.
Add support for individually resetting a device.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210922110530.24736-2-diana.craciun@oss.nxp.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The function prototype is missing an identifier name. Add one.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20210902212631.54260-1-colin.king@canonical.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching
to support future vendor provided vfio-pci variants (Yishai Hadas,
Max Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first
open, last close, and device sets (Jason Gunthorpe, Max Gurtovoy,
Yishai Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
-----BEGIN PGP SIGNATURE-----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=nzK7
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
Now that vfio_pci has been split into two source modules, one focusing on
the "struct pci_driver" (vfio_pci.c) and a toolbox library of code
(vfio_pci_core.c), complete the split and move them into two different
kernel modules.
As before vfio_pci.ko continues to present the same interface under sysfs
and this change will have no functional impact.
Splitting into another module and adding exports allows creating new HW
specific VFIO PCI drivers that can implement device specific
functionality, such as VFIO migration interfaces or specialized device
requirements.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-14-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This results in less kconfig wordage and a simpler understanding of the
required "depends on" to create the menu structure.
The next patch increases the nesting level a lot so this is a nice
preparatory simplification.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-13-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If VFIO_VIRQFD is required then turn on eventfd automatically.
The majority of kconfig users of the EVENTFD use select not depends on.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-12-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Expose an 'override_only' helper macro (i.e.
PCI_DRIVER_OVERRIDE_DEVICE_VFIO) for VFIO PCI sub system and add the
required code to prefix its matching entries with "vfio_" in
modules.alias file.
It allows VFIO device drivers to include match entries in the
modules.alias file produced by kbuild that are not used for normal
driver autoprobing and module autoloading. Drivers using these match
entries can be connected to the PCI device manually, by userspace, using
the existing driver_override sysfs.
For example the resulting modules.alias may have:
alias pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_core
alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci
alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci
In this example mlx5_core and mlx5_vfio_pci match to the same PCI
device. The kernel will autoload and autobind to mlx5_core but the
kernel and udev mechanisms will ignore mlx5_vfio_pci.
When userspace wants to change a device to the VFIO subsystem it can
implement a generic algorithm:
1) Identify the sysfs path to the device:
/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0
2) Get the modalias string from the kernel:
$ cat /sys/bus/pci/devices/0000:01:00.0/modalias
pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00
3) Prefix it with vfio_:
vfio_pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00
4) Search modules.alias for the above string and select the entry that
has the fewest *'s:
alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci
5) modprobe the matched module name:
$ modprobe mlx5_vfio_pci
6) cat the matched module name to driver_override:
echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:01:00.0/driver_override
7) unbind device from original module
echo 0000:01:00.0 > /sys/bus/pci/devices/0000:01:00.0/driver/unbind
8) probe PCI drivers (or explicitly bind to mlx5_vfio_pci)
echo 0000:01:00.0 > /sys/bus/pci/drivers_probe
The algorithm is independent of bus type. In future the other buses with
VFIO device drivers, like platform and ACPI, can use this algorithm as
well.
This patch is the infrastructure to provide the information in the
modules.alias to userspace. Convert the only VFIO pci_driver which results
in one new line in the modules.alias:
alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci
Later series introduce additional HW specific VFIO PCI drivers, such as
mlx5_vfio_pci.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # for pci.h
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-11-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is a preparation before splitting vfio_pci.ko to 2 modules.
As module parameters are a kind of uAPI they need to stay on vfio_pci.ko
to avoid a user visible impact.
For now continue to keep the implementation of these options in
vfio_pci_core.c. Arguably they are vfio_pci functionality, but further
splitting of vfio_pci_core.c will be better done in another series
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-9-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
igd is related to the vfio_pci pci_driver implementation, move it out of
vfio_pci_core.c.
This is preparation for splitting vfio_pci.ko into 2 drivers.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-8-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Split the vfio_pci driver into two logical parts, the 'struct
pci_driver' (vfio_pci.c) which implements "Generic VFIO support for any
PCI device" and a library of code (vfio_pci_core.c) that helps
implementing a struct vfio_device on top of a PCI device.
vfio_pci.ko continues to present the same interface under sysfs and this
change should have no functional impact.
Following patches will turn vfio_pci and vfio_pci_core into a separate
module.
This is a preparation for allowing another module to provide the
pci_driver and allow that module to customize how VFIO is setup, inject
its own operations, and easily extend vendor specific functionality.
At this point the vfio_pci_core still contains a lot of vfio_pci
functionality mixed into it. Following patches will move more of the
large scale items out, but another cleanup series will be needed to get
everything.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-7-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_device structure is embedded into the vfio_pci_core_device
structure, so there is no reason for not including the header file in
the vfio_pci_core header as well.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-6-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is another preparation patch for separating the vfio_pci driver to
a subsystem driver and a generic pci driver. This patch doesn't change
any logic.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is a preparation patch for separating the vfio_pci driver to a
subsystem driver and a generic pci driver. This patch doesn't change any
logic.
The new vfio_pci_core_device structure will be the main structure of the
core driver and later on vfio_pci_device structure will be the main
structure of the generic vfio_pci driver.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is a preparation patch for separating the vfio_pci driver to a
subsystem driver and a generic pci driver. This patch doesn't change any
logic.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is a preparation patch for separating the vfio_pci driver to a
subsystem driver and a generic pci driver. This patch doesn't change any
logic.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_find_dma_valid is defined to return WAITED on success if it was
necessary to wait. However, the loop forgets the WAITED value returned
by vfio_wait() and returns 0 in a later iteration. Fix it.
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Reviewed-by: Steve Sistare <steven.sistare@oracle.com>
Link: https://lore.kernel.org/r/1629736550-2388-1-git-send-email-anthony.yznaga@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The SPDX and verbose license text are redundant, however in this case
the verbose license indicates a GPL v2 only while SPDX specifies v2+.
Remove the verbose license and correct SPDX to the more restricted
version.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20210824003749.1039-1-caihuoqing@baidu.com
[aw: commit log]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Like vfio_pci_dev_set_try_reset() this code wants to reset all of the
devices in the "reset group" which is the same membership as the device
set.
Instead of trying to reconstruct the device set from the PCI list go
directly from the device set's device list to execute the reset.
The same basic structure as vfio_pci_dev_set_try_reset() is used. The
'vfio_devices' struct is replaced with the device set linked list and we
simply sweep it multiple times under the lock.
This eliminates a memory allocation and get/put traffic and another
improperly locked test of pci_dev_driver().
Reviewed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/10-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_pci_try_bus_reset() is triggering a reset of the entire_dev set if
any device within it has accumulated a needs_reset. This reset can only be
done once all of the drivers operating the PCI devices to be reset are in
a known safe state.
Make this clearer by directly operating on the dev_set instead of the
vfio_pci_device. Rename the function to vfio_pci_dev_set_try_reset().
Use the device list inside the dev_set to check that all drivers are in a
safe state instead of working backwards from the pci_device.
The dev_set->lock directly prevents devices from joining/leaving the set,
or changing their state, which further implies the pci_device cannot
change drivers or that the vfio_device be freed, eliminating the need for
get/put's.
If a pci_device to be reset is not in the dev_set then the reset cannot be
used as we can't know what the state of that driver is. Directly measure
this by checking that every pci_device is in the dev_set - which
effectively proves that VFIO drivers are attached to everything.
Remove the odd interaction around vfio_pci_set_power_state() - have the
only caller avoid its redundant vfio_pci_set_power_state() instead of
avoiding it inside vfio_pci_dev_set_try_reset().
This restructuring corrects a call to pci_dev_driver() without holding the
device_lock() and removes a hard wiring to &vfio_pci_driver.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/9-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
PCI wants to have the usual open/close_device() logic with the slight
twist that the open/close_device() must be done under a singelton lock
shared by all of the vfio_devices that are in the PCI "reset group".
The reset group, and thus the device set, is determined by what devices
pci_reset_bus() touches, which is either the entire bus or only the slot.
Rely on the core code to do everything reflck was doing and delete reflck
entirely.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/8-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Platform simply wants to run some code when the device is first
opened/last closed. Use the core framework and locking for this. Aside
from removing a bit of code this narrows the locking scope from a global
lock.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/7-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
FSL uses the internal reflck to implement the open_device() functionality,
conversion to the core code is straightforward.
The decision on which set to be part of is trivially based on the
is_fsl_mc_bus_dprc() and we use a 'struct device *' pointer as the set_id.
The dev_set lock is protecting the interrupts setup. The FSL MC devices
are using MSIs and only the DPRC device is allocating the MSIs from the
MSI domain. The other devices just take interrupts from a pool. The lock
is protecting the access to this pool.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Tested-by: Diana Craciun OSS <diana.craciun@oss.nxp.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently the driver ops have an open/release pair that is called once
each time a device FD is opened or closed. Add an additional set of
open/close_device() ops which are called when the device FD is opened for
the first time and closed for the last time.
An analysis shows that all of the drivers require this semantic. Some are
open coding it as part of their reflck implementation, and some are just
buggy and miss it completely.
To retain the current semantics PCI and FSL depend on, introduce the idea
of a "device set" which is a grouping of vfio_device's that share the same
lock around opening.
The device set is established by providing a 'set_id' pointer. All
vfio_device's that provide the same pointer will be joined to the same
singleton memory and lock across the whole set. This effectively replaces
the oddly named reflck.
After conversion the set_id will be sourced from:
- A struct device from a fsl_mc_device (fsl)
- A struct pci_slot (pci)
- A struct pci_bus (pci)
- The struct vfio_device (everything)
The design ensures that the above pointers are live as long as the
vfio_device is registered, so they form reliable unique keys to group
vfio_devices into sets.
This implementation uses xarray instead of searching through the driver
core structures, which simplifies the somewhat tricky locking in this
area.
Following patches convert all the drivers.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This pairs with vfio_init_group_dev() and allows undoing any state that is
stored in the vfio_device unrelated to registration. Add appropriately
placed calls to all the drivers.
The following patch will use this to add pre-registration state for the
device set.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYPkvsg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl8pwCff+mL/zOaU8M1KwIHrEvNH6LgF58AoKgBAeCb
58Lenmw44ofP5itzU5x3
=J5mO
-----END PGP SIGNATURE-----
Merge tag 'bus_remove_return_void-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into drm-next
Bus: Make remove callback return void tag
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixed up merge conflict in drm]
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/YPkwQwf0dUKnGA7L@kroah.com
Only a single driver actually sets the ->request method, so don't print
a scary warning if it isn't.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20210726143524.155779-3-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Without this setups with buіlt-in mdev and mdev-drivers fail to
register like this:
[1.903149] Driver 'intel_vgpu_mdev' was unable to register with bus_type 'mdev' because the bus was not initialized.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20210726143524.155779-2-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The only implementation of this in IGD returns a -ERRNO which is
implicitly cast through a size_t and then casted again and returned as a
ssize_t in vfio_pci_rw().
Fix the vfio_pci_regops->rw() return type to be ssize_t so all is
consistent.
Fixes: 28541d41c9 ("vfio/pci: Add infrastructure for additional device specific regions")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/0-v3-5db12d1bf576+c910-vfio_rw_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIO_NOIOMMU is supposed to be an element in the VFIO menu, not start
a new menu. Correct this copy-paste mistake.
Fixes: 03a76b60f8 ("vfio: Include No-IOMMU mode")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/0-v1-3f0b685c3679+478-vfio_menuconfig_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
UAPI Changes:
- Remove sysfs stats for dma-buf attachments, as it causes a performance regression.
Previous merge is not in a rc kernel yet, so no userspace regression possible.
Cross-subsystem Changes:
- Sanitize user input in kyro's viewport ioctl.
- Use refcount_t in fb_info->count
- Assorted fixes to dma-buf.
- Extend x86 efifb handling to all archs.
- Fix neofb divide by 0.
- Document corpro,gm7123 bridge dt bindings.
Core Changes:
- Slightly rework drm master handling.
- Cleanup vgaarb handling.
- Assorted fixes.
Driver Changes:
- Add support for ws2401 panel.
- Assorted fixes to stm, ast, bochs.
- Demidlayer ingenic irq.
-----BEGIN PGP SIGNATURE-----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=BUya
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-07-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15-rc1:
UAPI Changes:
- Remove sysfs stats for dma-buf attachments, as it causes a performance regression.
Previous merge is not in a rc kernel yet, so no userspace regression possible.
Cross-subsystem Changes:
- Sanitize user input in kyro's viewport ioctl.
- Use refcount_t in fb_info->count
- Assorted fixes to dma-buf.
- Extend x86 efifb handling to all archs.
- Fix neofb divide by 0.
- Document corpro,gm7123 bridge dt bindings.
Core Changes:
- Slightly rework drm master handling.
- Cleanup vgaarb handling.
- Assorted fixes.
Driver Changes:
- Add support for ws2401 panel.
- Assorted fixes to stm, ast, bochs.
- Demidlayer ingenic irq.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d0d2fe8-01fc-e216-c3fd-38db9e69944e@linux.intel.com
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VGA arbitration is entirely based on pci_dev structures, so just pass
that back to the set_vga_decode callback.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-8-hch@lst.de
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
All callers pass NULL as the irq_set_state argument, so remove it and
the ->irq_set_state member in struct vga_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-7-hch@lst.de
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
vma_lookup() finds the vma of a specific address with a cleaner interface
and is more readable.
Link: https://lkml.kernel.org/r/20210521174745.2219620-12-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the new pci_dev_trylock() helper to simplify our locking.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20210623022824.308041-3-mcgrof@kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_group structure is already defined in vfio module so in order
to improve code readability and for simplicity, rename the vfio_group
structure in vfio_iommu_type1 module to vfio_iommu_group.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20210608112841.51897-1-mgurtovoy@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This allows a mdev driver to opt out of using vfio_mdev.c, instead the
driver will provide a 'struct mdev_driver' and register directly with the
driver core.
Much of mdev_parent_ops becomes unused in this mode:
- create()/remove() are done via the mdev_driver probe()/remove()
- mdev_attr_groups becomes mdev_driver driver.dev_groups
- Wrapper function callbacks are replaced with the same ones from
struct vfio_device_ops
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20210617142218.1877096-8-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For some reason the vfio_mdev shim mdev_driver has its own module and
kconfig. As the next patch requires access to it from mdev.ko merge the
two modules together and remove VFIO_MDEV_DEVICE.
A later patch deletes this driver entirely.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20210617142218.1877096-7-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio core driver is now taking refcount on the provider drivers,
remove redundant parent_module attribute from vfio_platform_device
structure.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20210518192133.59195-3-mgurtovoy@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Remove code duplication and move module refcounting to the subsystem
module.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20210518192133.59195-2-mgurtovoy@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The ->parent_module is the one that use in try_module_get. It should
also be the one the we use in module_put during vfio_platform_open().
Fixes: 32a2d71c4e ("vfio: platform: introduce vfio-platform-base module")
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20210518192133.59195-1-mgurtovoy@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows
that, in the worst scenario, could lead to heap overflows.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Message-Id: <20210513230155.GA217517@embeddedor>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
zap_vma_ptes() is only available when CONFIG_MMU is set/enabled.
Without CONFIG_MMU, vfio_pci.o has build errors, so make
VFIO_PCI depend on MMU.
riscv64-linux-ld: drivers/vfio/pci/vfio_pci.o: in function `vfio_pci_mmap_open':
vfio_pci.c:(.text+0x1ec): undefined reference to `zap_vma_ptes'
riscv64-linux-ld: drivers/vfio/pci/vfio_pci.o: in function `.L0 ':
vfio_pci.c:(.text+0x165c): undefined reference to `zap_vma_ptes'
Fixes: 11c4cd07ba ("vfio-pci: Fault mmaps to enable vma tracking")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210515190856.2130-1-rdunlap@infradead.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The error code returned from vfio_ext_cap_len() is stored in 'len', not
in 'ret'.
Fixes: 89e1f7d4c6 ("vfio: Add PCI device driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20210515020458.6771-1-thunder.leizhen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Including:
- Big cleanup of almost unsused parts of the IOMMU API by
Christoph Hellwig. This mostly affects the Freescale PAMU
driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- SMMUv3: Drop vestigial PREFETCH_ADDR support
- SMMUv3: Elide TLB sync logic for empty gather
- SMMUv3: Fix "Service Failure Mode" handling
- SMMUv2: New Qualcomm compatible string
- Removal of the AMD IOMMU performance counter writeable check
on AMD. It caused long boot delays on some machines and is
only needed to work around an errata on some older (possibly
pre-production) chips. If someone is still hit by this
hardware issue anyway the performance counters will just
return 0.
- Support for targeted invalidations in the AMD IOMMU driver.
Before that the driver only invalidated a single 4k page or the
whole IO/TLB for an address space. This has been extended now
and is mostly useful for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the
Intel VT-d driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost
when converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and
support iommu_ops to be const again when drivers are built as
modules.
-----BEGIN PGP SIGNATURE-----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=qF2C
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Big cleanup of almost unsused parts of the IOMMU API by Christoph
Hellwig. This mostly affects the Freescale PAMU driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- Drop vestigial PREFETCH_ADDR support (SMMUv3)
- Elide TLB sync logic for empty gather (SMMUv3)
- Fix "Service Failure Mode" handling (SMMUv3)
- New Qualcomm compatible string (SMMUv2)
- Removal of the AMD IOMMU performance counter writeable check on AMD.
It caused long boot delays on some machines and is only needed to
work around an errata on some older (possibly pre-production) chips.
If someone is still hit by this hardware issue anyway the performance
counters will just return 0.
- Support for targeted invalidations in the AMD IOMMU driver. Before
that the driver only invalidated a single 4k page or the whole IO/TLB
for an address space. This has been extended now and is mostly useful
for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the Intel VT-d
driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost when
converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and support
iommu_ops to be const again when drivers are built as modules.
* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
iommu: Streamline registration interface
iommu: Statically set module owner
iommu/mediatek-v1: Add error handle for mtk_iommu_probe
iommu/mediatek-v1: Avoid build fail when build as module
iommu/mediatek: Always enable the clk on resume
iommu/fsl-pamu: Fix uninitialized variable warning
iommu/vt-d: Force to flush iotlb before creating superpage
iommu/amd: Put newline after closing bracket in warning
iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
iommu/amd: Remove performance counter pre-initialization test
Revert "iommu/amd: Fix performance counter initialization"
iommu/amd: Remove duplicate check of devid
iommu/exynos: Remove unneeded local variable initialization
iommu/amd: Page-specific invalidations for more than one page
iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
iommu/vt-d: Invalidate PASID cache when root/context entry changed
iommu/vt-d: Remove WO permissions on second-level paging entries
iommu/vt-d: Report the right page fault address
...
pinned_page_dirty_scope is optimized out by commit 010321565a
("vfio/iommu_type1: Mantain a counter for non_pinned_groups"),
but appears again due to some issues during merging branches.
We can safely remove it here.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20210412024415.30676-1-zhukeqian1@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When mmaping an extra device region verify that the region index
derived from the mmap offset is valid.
Fixes: a15b1883fe ("vfio_pci: Allow mapping extra regions")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Message-Id: <20210412214124.GA241759@lisa.in-ulm.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The driver core standard is to pass in the properly typed object, the
properly typed attribute and the buffer data. It stems from the root
kobject method:
ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr,..)
Each subclass of kobject should provide their own function with the same
signature but more specific types, eg struct device uses:
ssize_t (*show)(struct device *dev, struct device_attribute *attr,..)
In this case the existing signature is:
ssize_t (*show)(struct kobject *kobj, struct device *dev,..)
Where kobj is a 'struct mdev_type *' and dev is 'mdev_type->parent->dev'.
Change the mdev_type related sysfs attribute functions to:
ssize_t (*show)(struct mdev_type *mtype, struct mdev_type_attribute *attr,..)
In order to restore type safety and match the driver core standard
There are no current users of 'attr', but if it is ever needed it would be
hard to add in retroactively, so do it now.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <18-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The kobj here is a type-erased version of mdev_type, which is already
stored in the struct mdev_device being passed in. It was only ever used to
compute the type_group_id, which is now extracted directly from the mdev.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <17-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This returns the index in the supported_type_groups array that is
associated with the mdev_type attached to the struct mdev_device or its
containing struct kobject.
Each mdev_device can be spawned from exactly one mdev_type, which in turn
originates from exactly one supported_type_group.
Drivers are using weird string calculations to try and get back to this
index, providing a direct access to the index removes a bunch of wonky
driver code.
mdev_type->group can be deleted as the group is obtained using the
type_group_id.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <11-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
mdev_device->type->parent is the same thing.
The struct mdev_device was relying on the kref on the mdev_parent to also
indirectly hold a kref on the mdev_type pointer. Now that the type holds a
kref on the parent we can directly kref the mdev_type and remove this
implicit relationship.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <10-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This can fail, and seems to be a popular target for syzkaller error
injection. Check the error return and unwind with put_device().
Fixes: 7b96953bc6 ("vfio: Mediated device Core driver")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <9-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Once the memory for the struct mdev_device is allocated it should
immediately be device_initialize()'d and filled in so that put_device()
can always be used to undo the allocation.
Place the mdev_get/put_parent() so that they are clearly protecting the
mdev->parent pointer. Move the final put to the release function so that
the lifetime rules are trivial to understand. Update the goto labels to
follow the normal convention.
Remove mdev_device_free() as the release function via device_put() is now
usable in all cases.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <8-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
struct mdev_type holds a pointer to the kref'd object struct mdev_parent,
but doesn't hold the kref. The lifetime of the parent becomes implicit
because parent_remove_sysfs_files() is supposed to remove all the access
before the parent can be freed, but this is very hard to reason about.
Make it obviously correct by adding the missing get.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <7-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The next patch will use these in mdev_sysfs.c
While here remove the now dead code checks for NULL, a mdev_type can never
have a NULL parent.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <6-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The kobj pointer in mdev_device is actually pointing at a struct
mdev_type. Use the proper type so things are understandable.
There are a number of places that are confused and passing both the mdev
and the mtype as function arguments, fix these to derive the mtype
directly from the mdev to remove the redundancy.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <5-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is only done once, we don't need to generate code to initialize a
structure stored in the ELF .data segment. Fill in the three required
.driver members directly instead of copying data into them during
mdev_register_driver().
Further the to_mdev_driver() function doesn't belong in a public header,
just inline it into the two places that need it. Finally, we can now
clearly see that 'drv' derived from dev->driver cannot be NULL, firstly
because the driver core forbids it, and secondly because NULL won't pass
through the container_of(). Remove the dead code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <4-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The mdev API should accept and pass a 'struct mdev_device *' in all
places, not pass a 'struct device *' and cast it internally with
to_mdev_device(). Particularly in its struct mdev_driver functions, the
whole point of a bus's struct device_driver wrapper is to provide type
safety compared to the default struct device_driver.
Further, the driver core standard is for bus drivers to expose their
device structure in their public headers that can be used with
container_of() inlines and '&foo->dev' to go between the class levels, and
'&foo->dev' to be used with dev_err/etc driver core helper functions. Move
'struct mdev_device' to mdev.h
Once done this allows moving some one instruction exported functions to
static inlines, which in turns allows removing one of the two grotesque
symbol_get()'s related to mdev in the core code.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <3-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
