After initiator has burned up all login retries, target authentication
application begins to run. This triggers a link bounce on target side.
Initiator will attempt another login. Due to N2N, the PRLI [nvme | fcp] can
fail because of the mode mismatch with target. This patch add a few more
login retries to revive the connection.
Link: https://lore.kernel.org/r/20220607044627.19563-11-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User failed to see disk via n2n topology. Driver used up all login retries
before authentication application started. When authentication application
started, driver did not have enough login retries to connect securely. On
app_start, driver will reset the login retry attempt count.
Link: https://lore.kernel.org/r/20220607044627.19563-10-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Recently driver has implemented a new doorbell mechanism via bsg. The new
doorbell tells driver the exact buffer size application has where driver
can fill it up with events. The old doorbell guestimated application buffer
size is 256.
Remove duplicate functionality, the application has moved on to the new
doorbell interface.
Link: https://lore.kernel.org/r/20220607044627.19563-9-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Notify authentication application of a NPIV deletion event is about to
occur. This allows app to perform cleanup.
Link: https://lore.kernel.org/r/20220607044627.19563-7-njavali@marvell.com
Fixes: 9efea843a9 ("scsi: qla2xxx: edif: Add detection of secure device")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a thread is in the process of reestablish a session, a flag is set to
prevent multiple threads/triggers from doing the same task. This flag was
left on, and any attempt to relogin was locked out. Clear this flag if the
attempt has failed.
Link: https://lore.kernel.org/r/20220607044627.19563-6-njavali@marvell.com
Fixes: dd30706e73 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add bsg interface for app to read doorbell events. This interface lets
driver know how much app can read based on return buffer size. When the
next event(s) occur, driver will return the bsg_job with the event(s) in
the return buffer.
If there is no event to read, driver will hold on to the bsg_job up to few
seconds as a way to control the polling interval.
Link: https://lore.kernel.org/r/20220607044627.19563-5-njavali@marvell.com
Fixes: dd30706e73 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On session deletion, wait for app to acknowledge before moving on. This
allows both app and driver to stay in sync. In addition, this gives a
chance for authentication app to do any type of cleanup before moving on.
Link: https://lore.kernel.org/r/20220607044627.19563-4-njavali@marvell.com
Fixes: dd30706e73 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch uses GFFID switch command to scan whether remote device is
Target or Initiator mode. Based on that info, driver will not pass up
Initiator info to authentication application. This helps reduce unnecessary
stress for authentication application to deal with unused connections.
Link: https://lore.kernel.org/r/20220607044627.19563-2-njavali@marvell.com
Fixes: 7ebb336e45 ("scsi: qla2xxx: edif: Add start + stop bsgs")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mostly small bug fixes plus other trivial updates. The major change
of note is moving ufs out of scsi and a minor update to lpfc vmid
handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYptvayYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishb1rAPwJWSl1
kB9Qt1xPa1JK0Z7To2LRkrQ4uxYbAnpTLEP6UgEA3YuBccXRppcYQe5CXCrcZryz
BtTbtI3ApiV40xC/SRk=
=Uit3
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
The ql_dm_tgt_ex_pct parameter was introduced in commit ead038556f
("qla2xxx: Add Dual mode support in the driver"). Then the use of this
parameter was dropped in commit 99e1b683c4 ("scsi: qla2xxx: Add
ql2xiniexchg parameter").
Thus, remove ql_dm_tgt_ex_pct since it is no longer used.
Link: https://lore.kernel.org/r/AM9PR10MB41185ADE95B92B4E6926BE639DD49@AM9PR10MB4118.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
cppcheck reports
[drivers/scsi/qla2xxx/qla_mid.c:594]: (warning) Assignment of function parameter has no effect outside the function. Did you forget dereferencing it?
[drivers/scsi/qla2xxx/qla_mid.c:620]: (warning) Assignment of function parameter has no effect outside the function. Did you forget dereferencing it?
The functions qla25xx_free_req_que() and qla25xx_free_rsp_que() are
similar. They free a 'req' and a 'rsp' parameter respectively. The last
statement of both functions is setting the parameter to NULL. This has no
effect and can be removed.
Link: https://lore.kernel.org/r/20220521201607.4145298-1-trix@redhat.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of a small set of driver updates (lpfc, ufs,
mpt3sas mpi3mr, iscsi target). Apart from that this is mostly small
fixes with very few core changes (the biggest one being VPD caching.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYo2WnyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfEiAP4zvniL
xidsiCXGQ4pWF4QW3UxukXpGh5xFREhNCYT9+QEA+DyilCALOI+ZT5GKu2V6gkby
R29ve48/NAWl3fwYjMQ=
=GPL1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of a small set of driver updates (lpfc, ufs, mpt3sas
mpi3mr, iscsi target). Apart from that this is mostly small fixes with
very few core changes (the biggest one being VPD caching)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits)
scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
scsi: elx: efct: Remove NULL check after calling container_of()
scsi: dpt_i2o: Drop redundant spinlock initialization
scsi: qedf: Remove redundant variable op
scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()
scsi: fnic: Replace DMA mask of 64 bits with 47 bits
scsi: mpi3mr: Add target device related sysfs attributes
scsi: mpi3mr: Add shost related sysfs attributes
scsi: elx: efct: Remove redundant memset() statement
scsi: megaraid_sas: Remove redundant memset() statement
scsi: mpi3mr: Return error if dma_alloc_coherent() fails
scsi: hisi_sas: Fix rescan after deleting a disk
scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset
scsi: libsas: Refactor sas_ata_hard_reset()
scsi: mpt3sas: Update driver version to 42.100.00.00
scsi: mpt3sas: Fix junk chars displayed while printing ChipName
scsi: ipr: Use kobj_to_dev()
scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()
scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()
scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc()
...
Aborting commands that have already been sent to the firmware can
cause BUG in qlt_free_cmd(): BUG_ON(cmd->sg_mapped)
For instance:
- Command passes rdx_to_xfer state, maps sgl, sends to the firmware
- Reset occurs, qla2xxx performs ISP error recovery, aborts the command
- Target stack calls qlt_abort_cmd() and then qlt_free_cmd()
- BUG_ON(cmd->sg_mapped) in qlt_free_cmd() occurs because sgl was not
unmapped
Thus, unmap sgl in qlt_abort_cmd() for commands with the aborted flag set.
Link: https://lore.kernel.org/r/AS8PR10MB4952D545F84B6B1DFD39EC1E9DEE9@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
drivers/scsi/qla2xxx/qla_edif.c:660:11-15: Unneeded variable: "rval".
Return "0" on line 761.
Link: https://lore.kernel.org/r/20220426074334.9281-1-guozhengkui@vivo.com
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All work currently pending will be done first by calling
destroy_workqueue(). There is no need to flush it explicitly.
Link: https://lore.kernel.org/r/20220424062413.3220315-1-ran.jianping@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes. The high blast radius core update is the removal of
write same, which affects block and several non-SCSI devices. The
other big change, which is more local, is the removal of the SCSI
pointer.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
Ec1HDuUCE18H1H2QAh0=
=/Ty9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes.
The high blast radius core update is the removal of write same, which
affects block and several non-SCSI devices. The other big change,
which is more local, is the removal of the SCSI pointer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Use kcalloc()
...
During SNS Register FC-4 Features (RFF_ID) the initiator driver was sending
incorrect type field for NVMe supported device. Use correct feature type
field.
Link: https://lore.kernel.org/r/20220310092604.22950-12-njavali@marvell.com
Fixes: e374f9f592 ("scsi: qla2xxx: Migrate switch registration commands away from mailbox interface")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While a session is in the middle of a relogin, a late RSCN can be delivered
from switch. RSCN trigger fabric scan where the scan logic can trigger
another session login while a login is in progress. Reduce the extra
trigger to prevent multiple logins to the same session.
Link: https://lore.kernel.org/r/20220310092604.22950-10-njavali@marvell.com
Fixes: bee8b84686 ("scsi: qla2xxx: Reduce redundant ADISC command for RSCNs")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For session recovery, driver relies on the dpc thread to initiate certain
operations. The dpc thread runs exclusively without the Mailbox interface
being occupied. A recent code change for heartbeat check via mailbox cmd 0
is preventing the dpc thread from carrying out its operation. This patch
allows the higher priority error recovery to run first before running the
lower priority heartbeat check.
Link: https://lore.kernel.org/r/20220310092604.22950-9-njavali@marvell.com
Fixes: d94d8158e1 ("scsi: qla2xxx: Add heartbeat check")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User experienced device lost. The log shows Get port data base command was
queued up, failed, and requeued again. Every time it is requeued, it set
the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring
because driver thinks a recovery is in progress for this session. In
essence, this session is hung. The reason it gets into this place is the
session deletion got in front of this call due to link perturbation.
Break the requeue cycle and exit. The session deletion code will trigger a
session relogin.
Link: https://lore.kernel.org/r/20220310092604.22950-8-njavali@marvell.com
Fixes: 726b854870 ("qla2xxx: Add framework for async fabric discovery")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For N2N topology, ELS Passthrough is used to send PLOGI. On failure of ELS
pass through PLOGI, driver flipped over to using LLIOCB PLOGI for N2N. This
is not consistent. Delete the session to restart the connection where ELS
pass through PLOGI would be used consistently.
Link: https://lore.kernel.org/r/20220310092604.22950-7-njavali@marvell.com
Fixes: c76ae845ea ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During purex packet handling the driver was incorrectly freeing a
pre-allocated structure. Fix this by skipping that entry.
System crashed with the following stack during a module unload test.
Call Trace:
sbitmap_init_node+0x7f/0x1e0
sbitmap_queue_init_node+0x24/0x150
blk_mq_init_bitmaps+0x3d/0xa0
blk_mq_init_tags+0x68/0x90
blk_mq_alloc_map_and_rqs+0x44/0x120
blk_mq_alloc_set_map_and_rqs+0x63/0x150
blk_mq_alloc_tag_set+0x11b/0x230
scsi_add_host_with_dma.cold+0x3f/0x245
qla2x00_probe_one+0xd5a/0x1b80 [qla2xxx]
Call Trace with slub_debug and debug kernel:
kasan_report_invalid_free+0x50/0x80
__kasan_slab_free+0x137/0x150
slab_free_freelist_hook+0xc6/0x190
kfree+0xe8/0x2e0
qla2x00_free_device+0x3bb/0x5d0 [qla2xxx]
qla2x00_remove_one+0x668/0xcf0 [qla2xxx]
Link: https://lore.kernel.org/r/20220310092604.22950-6-njavali@marvell.com
Fixes: 62e9dd1777 ("scsi: qla2xxx: Change in PUREX to handle FPIN ELS requests")
Cc: stable@vger.kernel.org
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
At NVMe ELS request time, request structure is DMA mapped and never
unmapped. Fix this by calling the unmap on ELS completion.
Link: https://lore.kernel.org/r/20220310092604.22950-5-njavali@marvell.com
Fixes: e84067d743 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver registration of localport can race when it happens at the remote
port discovery time. Fix this by calling the registration under a mutex.
Link: https://lore.kernel.org/r/20220310092604.22950-4-njavali@marvell.com
Fixes: e84067d743 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User experienced some of the LUN failed to get rediscovered after long
cable pull test. The issue is triggered by a race condition between driver
setting session online state vs starting the LUN scan process at the same
time. Current code set the online state after notifying the session is
available. In this case, trigger to start the LUN scan process happened
before driver could set the session in online state. LUN scan ends up with
failure due to the session online check was failing.
Set the online state before reporting of the availability of the session.
Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com
Fixes: aecf043443 ("scsi: qla2xxx: Fix Remote port registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User experienced no task management error while target device is responding
with error. The RSP_CODE field in the status IOCB is in little endian.
Driver assumes it's big endian and it picked up erroneous data.
Convert the data back to big endian as is on the wire.
Link: https://lore.kernel.org/r/20220310092604.22950-2-njavali@marvell.com
Fixes: faef62d134 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make q_dev_state a little more readable and maintainable by using named
initializers.
Also convert QLA8XXX_DEV_* macros into an enum and remove
qla83xx_dev_state_to_string(), which is a duplicate of qdev_state().
Link: https://lore.kernel.org/r/AS8PR10MB495298515A7553C8D6D6E74D9D349@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make port_state_str and port_dstate_str a little more readable and
maintainable by using named initializers.
Also convert FCS_* macros into an enum.
Link: https://lore.kernel.org/r/AS8PR10MB495215841EB25C16DBC0CB409D349@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of using the SCp.ptr field to track whether or not a command is
in flight, use the sp->type field to track this information. sp->type
must be set for proper operation of the qla2xxx driver. See e.g. the
switch (sp->type) statement in qla2x00_ct_entry().
This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220218195117.25689-43-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
UAPI and wireless changes were intentionally excluded from this patch
and will be sent out separately.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
The qla_sess_op_cmd_list was introduced in commit 8b2f5ff3d0 ("qla2xxx:
cleanup cmd in qla workqueue before processing TMR"). Then the usage of
this list was dropped in commit fb35265b12 ("scsi: qla2xxx: Remove
session creation redundant code").
Thus, remove this list since it is no longer used.
Link: https://lore.kernel.org/r/AS8PR10MB49524AAB4C8016E4AFF17FFB9D2D9@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This done routine will delete the timer and check for its return value and
decrease the reference count accordingly. This prevents boot hangs reported
after commit 31e6cdbe0e ("scsi: qla2xxx: Implement ref count for SRB")
was merged.
Link: https://lore.kernel.org/r/20220208093946.4471-1-njavali@marvell.com
Fixes: 31e6cdbe0e ("scsi: qla2xxx: Implement ref count for SRB")
Reported-by: Ewan Milne <emilne@redhat.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While allocating firmware dump, check if dump is already collected and do
not re-allocate the buffer.
Link: https://lore.kernel.org/r/20220110050218.3958-17-njavali@marvell.com
Cc: stable@vger.kernel.org
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is an update to the original 28xx adapter enablement. Add a bunch of
conditionals that are applicable for 28xx.
Link: https://lore.kernel.org/r/20220110050218.3958-16-njavali@marvell.com
Fixes: ecc89f25e2 ("scsi: qla2xxx: Add Device ID for ISP28XX")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
28XX adapters are capable of detecting both T10 PI tag escape values as
well as IP guard. This was missed due to the adapter type missed in the
corresponding macros. Fix this by adding support for 28xx in those macros.
Link: https://lore.kernel.org/r/20220110050218.3958-14-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Tested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Silence compile warning due to unaligned memory access.
qla_edif.c:713:45: warning: taking address of packed member 'u' of class or
structure 'auth_complete_cmd' may result in an unaligned pointer value
[-Waddress-of-packed-member]
fcport = qla2x00_find_fcport_by_pid(vha, &appplogiok.u.d_id);
Link: https://lore.kernel.org/r/20220110050218.3958-13-njavali@marvell.com
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A device logout in loop topology initiates a device connection teardown
which loses the FW device handle. In loop topo, the device handle is not
regrabbed leading to device login failures and eventually to loss of the
device. Fix this by taking the main login path that does it.
Link: https://lore.kernel.org/r/20220110050218.3958-11-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add ql2xnvme_queues module parameter to configure number of NVMe queues
Usage:
Number of NVMe Queues that can be configured.
Final value will be min(ql2xnvme_queues, num_cpus, num_chip_queues),
1 - Minimum number of queues supported
8 - Default value
128 - Maximum number of queues supported
Link: https://lore.kernel.org/r/20220110050218.3958-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Per FW request, Exec FW can fail due to temporary error resulting in driver
not attaching to the adapter. Add retry of this command up to 4 retries.
Link: https://lore.kernel.org/r/20220110050218.3958-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix stuck sessions in get port database. When a thread is in the process of
re-establishing a session, a flag is set to prevent multiple threads /
triggers from doing the same task. This flag was left on, where any attempt
to relogin was locked out. Clear this flag, if the attempt has failed.
Link: https://lore.kernel.org/r/20220110050218.3958-4-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The timeout handler and the done function are racing. When
qla2x00_async_iocb_timeout() starts to run it can be preempted by the
normal response path (via the firmware?). qla24xx_async_gpsc_sp_done()
releases the SRB unconditionally. When scheduling back to
qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed
sp->qpair pointer:
qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21.
qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21
qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400.
qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5
BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx]
Obvious solution to this is to introduce a reference counter. One reference
is taken for the normal code path (the 'good' case) and one for the timeout
path. As we always race between the normal good case and the timeout/abort
handler we need to serialize it. Also we cannot assume any order between
the handlers. Since this is slow path we can use proper synchronization via
locks.
When we are able to cancel a timer (del_timer returns 1) we know there
can't be any error handling in progress because the timeout handler hasn't
expired yet, thus we can safely decrement the refcounter by one.
If we are not able to cancel the timer, we know an abort handler is
running. We have to make sure we call sp->done() in the abort handlers
before calling kref_put().
Link: https://lore.kernel.org/r/20220110050218.3958-3-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move common open-coded asynchronous command initializing code such as
setting up the timer and the done callback into one function. This is a
preparation step and allows us later on to change the low level error flow
handling at a central place.
Link: https://lore.kernel.org/r/20220110050218.3958-2-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the dev_loss_tmo setting is only ever used for SCSI
devices. This patch reshuffles initialisation such that the SCSI remote
ports are registered before the NVMe ones, allowing the dev_loss_tmo
setting to be synchronized between SCSI and NVMe.
Link: https://lore.kernel.org/r/20211214111139.52503-1-dwagner@suse.de
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 598a90f200 ("scsi: qla2xxx: add ring buffer for tracing debug
logs") introduced unconditional log string formatting to ql_dbg() even if
ql_dbg_log event is disabled. It harms performance because some strings are
formatted in fastpath and/or interrupt context.
Link: https://lore.kernel.org/r/20211112145446.51210-1-r.bolshakov@yadro.com
Fixes: 598a90f200 ("scsi: qla2xxx: add ring buffer for tracing debug logs")
Cc: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The > comparison needs to be >= to prevent accessing one element beyond the
end of the app_reply->ports[] array.
Link: https://lore.kernel.org/r/20211109115219.GE16587@kili
Fixes: 7878f22a2e ("scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs")
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCM changes set the flags in mcp->out_mb instead of mcp->in_mb so the
data was not actually being read into the mcp->mb[] array from the adapter.
Link: https://lore.kernel.org/r/20211108183012.13895-1-emilne@redhat.com
Fixes: 9f2475fe74 ("scsi: qla2xxx: SAN congestion management implementation")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYY5mOyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpjAQDboVkH
7RQblJf8AKDMjN2baSIrmbk7qEUqzRgo6Ef3egEAi044Gx4KqBwzBLiCREcFW/Mt
F95pt5udsLypGhpfZlE=
=fiv8
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
scsi: scsi_debug: Don't call kcalloc() if size arg is zero
scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
scsi: scsi_ioctl: Validate command size
scsi: ufs: ufshpb: Properly handle max-single-cmd
scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
scsi: sr: Remove duplicate assignment
scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
scsi: ufs: ufs-exynos: Factor out priv data init
scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
scsi: ufs: ufs-exynos: Add setup_clocks callback
scsi: ufs: ufs-exynos: Add refclkout_stop control
scsi: ufs: ufs-exynos: Simplify drv_data retrieval
scsi: ufs: ufs-exynos: Change pclk available max value
scsi: ufs: Add quirk to enable host controller without PH configuration
scsi: ufs: Add quirk to handle broken UIC command
...
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes. Notable core changes are the removal of scsi->tag which caused
some churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
RG8vBdpxMudlvxAPi/A=
=BSFz
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
The partial UFS revert in 5.15 is needed for some additional fixes in
the 5.16 SCSI tree. Merge the fixes branch.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=HiWU
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- paride driver cleanups (Christoph)
- Remove cryptoloop support (Christoph)
- null_blk poll support (me)
- Now that add_disk() supports proper error handling, add it to various
drivers (Luis)
- Make ataflop actually work again (Michael)
- s390 dasd fixes (Stefan, Heiko)
- nbd fixes (Yu, Ye)
- Remove redundant wq flush in mtip32xx (Christophe)
- NVMe updates
- fix a multipath partition scanning deadlock (Hannes Reinecke)
- generate uevent once a multipath namespace is operational again
(Hannes Reinecke)
- support unique discovery controller NQNs (Hannes Reinecke)
- fix use-after-free when a port is removed (Israel Rukshin)
- clear shadow doorbell memory on resets (Keith Busch)
- use struct_size (Len Baker)
- add error handling support for add_disk (Luis Chamberlain)
- limit the maximal queue size for RDMA controllers (Max Gurtovoy)
- use a few more symbolic names (Max Gurtovoy)
- fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy)
- add support for ->map_queues on FC (Saurav Kashyap)
- support the current discovery subsystem entry (Hannes Reinecke)
- use flex_array_size and struct_size (Len Baker)
- bcache fixes (Christoph, Coly, Chao, Lin, Qing)
- MD updates (Christoph, Guoqing, Xiao)
- Misc fixes (Dan, Ding, Jiapeng, Shin'ichiro, Ye)
* tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block: (117 commits)
null_blk: Fix handling of submit_queues and poll_queues attributes
block: ataflop: Fix warning comparing pointer to 0
bcache: replace snprintf in show functions with sysfs_emit
bcache: move uapi header bcache.h to bcache code directory
nvmet: use flex_array_size and struct_size
nvmet: register discovery subsystem as 'current'
nvmet: switch check for subsystem type
nvme: add new discovery log page entry definitions
block: ataflop: more blk-mq refactoring fixes
block: remove support for cryptoloop and the xor transfer
mtd: add add_disk() error handling
rnbd: add error handling support for add_disk()
um/drivers/ubd_kern: add error handling support for add_disk()
m68k/emu/nfblock: add error handling support for add_disk()
xen-blkfront: add error handling support for add_disk()
bcache: add error handling support for add_disk()
dm: add add_disk() error handling
block: aoe: fixup coccinelle warnings
nvmet: use struct_size over open coded arithmetic
nvme: drop scan_lock and always kick requeue list when removing namespaces
...
Various EDIF bsgs did not properly fill out the reply_payload_rcv_len
field. This causes app to parse empty data in the return payload.
Link: https://lore.kernel.org/r/20211026115412.27691-13-njavali@marvell.com
Fixes: 7ebb336e45 ("scsi: qla2xxx: edif: Add start + stop bsgs")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
db_flags field is a bit field. Replace value check with bit flag check.
Link: https://lore.kernel.org/r/20211026115412.27691-12-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, firmware limits ELS payload to FC frame size/2112. This patch
adjusts memory buffer size to be able to handle max ELS payload.
Link: https://lore.kernel.org/r/20211026115412.27691-11-njavali@marvell.com
Fixes: 84318a9f01 ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On ipsec start by remote port, target port may use RSCN to trigger
initiator to relogin. If driver is already in the process of a relogin,
then ignore the RSCN and allow the current relogin to continue. This
reduces thrashing of the connection.
Link: https://lore.kernel.org/r/20211026115412.27691-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch is per review comment by Hannes Reinecke from previous
submission to replace list_for_each_safe with list_for_each_entry_safe.
Link: https://lore.kernel.org/r/20211026115412.27691-8-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On session down, driver will flush all stale messages and doorbell
events. This prevents authentication application from having to process
stale data.
Link: https://lore.kernel.org/r/20211026115412.27691-7-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Karunakara Merugu <kmerugu@marvell.com>
Signed-off-by: Karunakara Merugu <kmerugu@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current driver does unnecessary pause for each session to get to certain
state before allowing the app start call to return. In larger environment,
this introduces a long delay. Originally the delay was meant to
synchronize app and driver. However, the with current implementation the
two sides use various events to synchronize their state.
The same is applied to the authentication failure call.
Link: https://lore.kernel.org/r/20211026115412.27691-6-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On app start, all sessions need to be reset to see if secure connection can
be made. Fix the broken check which prevents that process.
Link: https://lore.kernel.org/r/20211026115412.27691-5-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When user uses issue_lip to do link bounce, driver sends additional target
reset to remote device before resetting the link. The target reset would
affect other paths with active I/Os. This patch will remove the unnecessary
target reset.
Link: https://lore.kernel.org/r/20211026115412.27691-4-njavali@marvell.com
Fixes: 5854771e31 ("[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For RSCN of type "Area, Domain, or Fabric", which indicate a portion or
entire fabric was disturbed, current driver does not set the scan_need flag
to indicate a session was affected by the disturbance. This in turn can
lead to I/O timeout and delay of relogin. Hence initiate relogin in the
event of fabric disturbance.
Link: https://lore.kernel.org/r/20211026115412.27691-2-njavali@marvell.com
Fixes: 1560bafdff ("scsi: qla2xxx: Use complete switch scan for RSCN events")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement ->map queues and use the block layer blk_mq_pci_map_queues
helper for mapping queues to CPUs.
With this mapping minimum 10%+ increase in performance is noticed.
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The sgl is freed in the target stack in target_release_cmd_kref() before
calling qlt_free_cmd() but there is an unmap of sgl in qlt_free_cmd() that
causes a panic if sgl is not yet DMA unmapped:
NIP dma_direct_unmap_sg+0xdc/0x180
LR dma_direct_unmap_sg+0xc8/0x180
Call Trace:
ql_dbg_prefix+0x68/0xc0 [qla2xxx] (unreliable)
dma_unmap_sg_attrs+0x54/0xf0
qlt_unmap_sg.part.19+0x54/0x1c0 [qla2xxx]
qlt_free_cmd+0x124/0x1d0 [qla2xxx]
tcm_qla2xxx_release_cmd+0x4c/0xa0 [tcm_qla2xxx]
target_put_sess_cmd+0x198/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_free+0x6c/0x90 [tcm_qla2xxx]
The sgl may be left unmapped in error cases of response sending. For
instance, qlt_rdy_to_xfer() maps sgl and exits when session is being
deleted keeping the sgl mapped.
This patch removes use-after-free of the sgl and ensures that the sgl is
unmapped for any command that was not sent to firmware.
Link: https://lore.kernel.org/r/20211018122650.11846-1-d.bogdanov@yadro.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 8c0eb596ba ("[SCSI] qla2xxx: Fix a memory leak in an error path of
qla2x00_process_els()"), intended to change:
bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN
to:
bsg_job->request->msgcode != FC_BSG_RPT_ELS
but changed it to:
bsg_job->request->msgcode == FC_BSG_RPT_ELS
instead.
Change the == to a != to avoid leaking the fcport structure or freeing
unallocated memory.
Link: https://lore.kernel.org/r/20211012191834.90306-2-jgu@purestorage.com
Fixes: 8c0eb596ba ("[SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Joy Gu <jgu@purestorage.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver probing function should return < 0 for failure, otherwise
kernel will treat value > 0 as success.
Link: https://lore.kernel.org/r/1634522181-31166-1-git-send-email-zheyuma97@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Additionally, remove qla_insert_tgt_attrs() and replace it with
qla_host_attr_is_visible().
Link: https://lore.kernel.org/r/20211012233558.4066756-41-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since there is no definition for the qla2x00_host_attrs_dm array, remove
its declaration.
Link: https://lore.kernel.org/r/20211012233558.4066756-40-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS
conflict reported by sfr.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Disable default logging of some I/O path messages. If desired, the messages
can be turned back on by setting ql2xextended_error_logging.
Link: https://lore.kernel.org/r/20210925035154.29815-1-njavali@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In dual mode in case of disabling the target, the whole port goes offline
and initiator is turned off too.
Fix restoring initiator mode after disabling target in dual mode.
Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com
Fixes: 0645cb8350 ("scsi: qla2xxx: Add mode control for each physical port")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The pointer req is being initialized with a value that is never read, it is
being updated later on. The assignment is redundant and can be removed.
Link: https://lore.kernel.org/r/20210910114610.44752-1-colin.king@canonical.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
DPC thread gets restricted due to a no-op mailbox, which is a blocking call
and has a high execution frequency. To free up the DPC thread we move no-op
handling to the workqueue. Also, modified qla_do_heartbeat() to send no-op
MBC if we don’t have any active interrupts, but there are still I/Os
outstanding with firmware.
Link: https://lore.kernel.org/r/20210908164622.19240-9-njavali@marvell.com
Fixes: d94d8158e1 ("scsi: qla2xxx: Add heartbeat check")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Process responses in Tx path if any available for better performance.
Link: https://lore.kernel.org/r/20210908164622.19240-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Authentication application may be running and in the past tried to probe
driver (app_start) but was unsuccessful. This could be due to the bsg layer
not being ready to service the request. On a successful link up, driver
will use the netlink Link Up event to notify the app to retry the app_start
call.
In another case, app does not poll for new NPIV host. This link up event
would notify app of the presence of a new SCSI host.
Link: https://lore.kernel.org/r/20210908164622.19240-6-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
System crash was seen when I/O was run against an NVMe target and aborts
were occurring.
Crash stack is:
-- relevant crash stack --
BUG: kernel NULL pointer dereference, address: 0000000000000010
:
#6 [ffffae1f8666bdd0] page_fault at ffffffffa740122e
[exception RIP: qla_nvme_abort_work+339]
RIP: ffffffffc0f592e3 RSP: ffffae1f8666be80 RFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff9b581fc8af80 RCX: ffffffffc0f83bd0
RDX: 0000000000000001 RSI: ffff9b5839c6c7c8 RDI: 0000000008000000
RBP: ffff9b6832f85000 R8: ffffffffc0f68160 R9: ffffffffc0f70652
R10: ffffae1f862ffdc8 R11: 0000000000000300 R12: 000000000000010d
R13: 0000000000000000 R14: ffff9b5839cea000 R15: 0ffff9b583fab170
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffae1f8666be98] process_one_work at ffffffffa6aba184
#8 [ffffae1f8666bed8] worker_thread at ffffffffa6aba39d
#9 [ffffae1f8666bf10] kthread at ffffffffa6ac06ed
The crash was due to a stale SRB structure access after it was aborted.
Fix the issue by removing stale access.
Link: https://lore.kernel.org/r/20210908164622.19240-5-njavali@marvell.com
Fixes: 2cabf10dbb ("scsi: qla2xxx: Fix hang on NVMe command timeouts")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This card is unique and doesn't support lower speeds, hence update the fdmi
field to display 16G only.
Link: https://lore.kernel.org/r/20210908164622.19240-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This interface will allow user space applications to send a mailbox command
to the firmware.
Link: https://lore.kernel.org/r/20210908164622.19240-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Device reset and target reset will be using different calling sequences, so
open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_device_reset(), and
remove the now obsolete function __qla2xxx_eh_generic_reset(). No
functional changes.
Link: https://lore.kernel.org/r/20210819091913.94436-4-hare@suse.de
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Device reset and target reset will be using different calling sequences, so
open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_target_reset(). No
functional changes.
Link: https://lore.kernel.org/r/20210819091913.94436-3-hare@suse.de
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When calling bus reset the driver will be doing a full SAN resync, so there
is no need to wait for any pending RSCNs; they'll be re-issued during
resync anyway.
Link: https://lore.kernel.org/r/20210819091913.94436-2-hare@suse.de
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When Target port transitions personality from one to another (NVMe <-->
FCP), there could be some overlap of the two where one layer is going down
while the other layer is coming up. This overlap can cause temporary I/O
error. Detect those errors/transitions and recover from them. Triggers
session tear down and allow relogin to re-drive the connection under the
following conditions:
- NVMe command error
- On PRLO + N2N (rida format 2)
Link: https://lore.kernel.org/r/20210817051315.2477-11-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For target port that register itself as both FCP + NVMe, initiator driver
will try to login one mode at a time. If the last mode did not succeed,
then driver will try the other mode.
When error is encountered, current code only flip to other mode one time
(NVMe->FCP) and remain on the last mode. Driver wrongly assumed target
port does not support PRLI NVMe, instead it was not ready to receive PRLI.
This patch will alternate back and forth on every PRLI failure until login
retry count has depleted or it is succeeded.
Link: https://lore.kernel.org/r/20210817051315.2477-10-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The abort callback gets called only when it gets posted to firmware. The
refcounting is done properly in the callback. On internal errors, the
callback is not invoked leading to a hung I/O. Fix this by having separate
error code when command gets returned from firmware.
Link: https://lore.kernel.org/r/20210817051315.2477-9-njavali@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently driver saves the personality type (FCP|NVMe) at the start of
first discovery of the remote device. If the remote device personality do
change over time, then qla driver needs to present that to user to decide.
Link: https://lore.kernel.org/r/20210817051315.2477-8-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For initiator mode, always do secure login when authentication app started.
Also remove redundant flags to indicate secure connection.
Link: https://lore.kernel.org/r/20210817051315.2477-7-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For EDIF + N2N to work, firmware 9.8 or later is required. The driver will
pause after PLOGI to allow app to authenticate. Once authentication
completes, app will tell driver to do PRLI.
Link: https://lore.kernel.org/r/20210817051315.2477-6-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following hung task call trace was seen:
[ 1230.183294] INFO: task qla2xxx_wq:523 blocked for more than 120 seconds.
[ 1230.197749] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1230.205585] qla2xxx_wq D 0 523 2 0x80004000
[ 1230.205636] Workqueue: qla2xxx_wq qlt_free_session_done [qla2xxx]
[ 1230.205639] Call Trace:
[ 1230.208100] __schedule+0x2c4/0x700
[ 1230.211607] schedule+0x38/0xa0
[ 1230.214769] schedule_timeout+0x246/0x2f0
[ 1230.222651] wait_for_completion+0x97/0x100
[ 1230.226921] qlt_free_session_done+0x6a0/0x6f0 [qla2xxx]
[ 1230.232254] process_one_work+0x1a7/0x360
...when device side port resets were done.
Abort threads were getting out without processing due to the "deleted"
flag check. The delete thread, meanwhile, could not proceed with a
logout (that would have cleared out pending requests) as the logout IOCB
work was not progressing. It appears like the hung qlt_free_session_done()
thread is causing the ha->wq works on hold. The qlt_free_session_done()
was hung waiting for nvme_fc_unregister_remoteport() + localport_delete cb
to be complete, which would only happen when all I/Os are released.
Fix this by allowing abort to progress until device delete is completely
done. This should make the qlt_free_session_done() proceed without hang and
thus clear up the deadlock.
Link: https://lore.kernel.org/r/20210817051315.2477-5-njavali@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
edif_enabled is prematurely turned on if hardware is capable of handling
the feature. However, firmware also needs to support EDIF before enabling
this bit.
Link: https://lore.kernel.org/r/20210817051315.2477-4-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reject inflight AUTH ELS if driver is going through session recovery.
Link: https://lore.kernel.org/r/20210817051315.2477-3-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When firmware indicates session has been torn down via UPDATE SA IOCB or
ELS Passthrough IOCB, the driver needs to also tear down the session.
Link: https://lore.kernel.org/r/20210817051315.2477-2-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avoid allocating firmware dump and only allocate a single queue for a kexec
kernel.
Link: https://lore.kernel.org/r/20210810043720.1137-12-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suppress logging of retryable errors. These can still be seen if extended
logging is enabled.
Link: https://lore.kernel.org/r/20210810043720.1137-11-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When user creates multiple NPIVs, the switch capabilities field is checked
before a vport is allowed to be created. This field is being toggled if a
switch scan is in progress. This creates erroneous reject of vport create.
Link: https://lore.kernel.org/r/20210810043720.1137-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Over time, fcport->port_type became a flag field. The flags within this
field were not defined properly. This caused external tools to read wrong
info.
Link: https://lore.kernel.org/r/20210810043720.1137-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To be consistent with other OS drivers, register OS name and version in
FDMI-1 fabric registration.
Link: https://lore.kernel.org/r/20210810043720.1137-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-39-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable num_cnt is being initialized with a value that is never read,
it is being updated later on. The assignment is redundant and can be
removed.
Link: https://lore.kernel.org/r/20210804131344.112635-1-colin.king@canonical.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
The sp->free(sp); call frees "sp" and then the debug code dereferences
it on the next line. Swap the order.
Link: https://lore.kernel.org/r/20210803155625.GA22735@kili
Fixes: 84318a9f01 ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els")
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are two spelling mistakes with the same triple l in alloc, one in a
comment, the other in a ql_dbg() debug message. Fix them.
Link: https://lore.kernel.org/r/20210729082413.4761-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Increment the command and the completion counts.
Link: https://lore.kernel.org/r/20210624052606.21613-11-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
After the completion of PLOGI, both sides have authenticated and PRLI
completed, encrypted I/Os are allowed to proceed.
- Use new firmware API to encrypt traffic on the wire
- Add driver parameter to enable|disable EDIF feature
# modprobe qla2xxx ql2xsecenable=1
Link: https://lore.kernel.org/r/20210624052606.21613-10-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
During runtime, driver and authentication application need to stay in sync
in terms of: Session being down|up, arrival of new authentication
message (AUTH ELS) and SADB update completion.
These events are queued up as doorbell to the authentication
application. Application would read this doorbell on regular basis to stay
up to date. Each SCSI host would have a separate doorbell queue.
The doorbell interface can daisy chain a list of events for each read. Each
event contains an event code + hint to help application steer the next
course of action.
Link: https://lore.kernel.org/r/20210624052606.21613-9-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
There is no FC switch scan service that can indicate whether a device is
secure or non-secure.
In order to detect whether the remote port supports encrypted operation,
driver must first do a PLOGI with the remote device. On completion of the
PLOGI, driver will query firmware to see if the device supports secure
login. To do that, driver + firmware must advertise the security bit via
PLOGI's service parameter. The remote device shall respond using the same
service parameter whether it supports it or not.
Link: https://lore.kernel.org/r/20210624052606.21613-8-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
On completion of the authentication process, the authentication application
will notify driver on whether it is successful or not.
In case of success, application will use the QL_VND_SC_AUTH_OK BSG call to
tell driver to proceed to the PRLI phase.
In case of failure, application will use the QL_VND_SC_AUTH_FAIL bsg call
to tell driver to tear down the connection and retry. In the case where an
existing session is active, the re-key process can fail. The session tear
down ensures data is not further compromised.
Link: https://lore.kernel.org/r/20210624052606.21613-7-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
As part of the authentication process, the authentication application will
generate a SADB entry (Security Association/SA, key, SPI value, etc). This
SADB is then passed to driver to be programmed into hardware. There will be
a pair of SADB's (Tx and Rx) for each connection.
After some period, the application can choose to change the key. At that
time, a new set of SADB pair is given to driver. The old set of SADB will
be deleted.
Add a new bsg call (QL_VND_SC_SA_UPDATE) to allow application to allow
adding or deleting SADB entries. Driver will not keep the key in
memory. It will pass it to HW.
It is assumed that application will assign a unique SPI value to this SADB
(SA + key). Driver + hardware will assign a handle to track this unique
SPI/SADB.
Link: https://lore.kernel.org/r/20210624052606.21613-6-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
Once authentication messages sent from a remote device have arrived, each
message is extracted and placed in a buffer for application to retrieve.
The FC frame header will be stripped, leaving behind the AUTH ELS payload.
It is up to the application to strip the AUTH ELS header to get to the
actual authentication message.
Link: https://lore.kernel.org/r/20210624052606.21613-5-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
Add the ability for authentication application to send and retrieve
messages as part of the authentication process via existing
FC_BSG_HST_ELS_NOLOGIN BSG interface.
To send a message, application is expected to format the data in the AUTH
ELS format. Refer to FC-SP2 for details.
If a message was received, application is required to reply with either a
LS_ACC or LS_RJT complete the exchange using the same interface. Otherwise,
remote device will treat it as a timeout.
Link: https://lore.kernel.org/r/20210624052606.21613-4-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
Add two new BSG calls:
- QL_VND_SC_GET_FCINFO: Application can from time to time request a list
of all FC ports or a single device that supports secure connection. If
driver sees a new or old device has logged into the switch, this call is
used to check for the WWPN.
- QL_VND_SC_GET_STATS: Application request for various statistics for each
FC port.
Link: https://lore.kernel.org/r/20210624052606.21613-3-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
Add two new BSG calls:
- QL_VND_SC_APP_START: Application will announce its presence to driver
with this call. Driver will restart all connections to see if remote
device supports security or not.
- QL_VND_SC_APP_STOP: Application announces it is in the process of
exiting. Driver will restart all connections to revert back to
non-secure. Provided the remote device is willing to allow a non-secure
connection.
Link: https://lore.kernel.org/r/20210624052606.21613-2-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the clang build warning:
drivers/scsi/qla2xxx/qla_nx.c:2209:6: error: variable 'status' set but not used [-Werror,-Wunused-but-set-variable]
int status = 0;
Link: https://lore.kernel.org/r/20210726201924.3202278-4-morbo@google.com
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the SCSI midlayer interfaces to query protection interval, reference
tag, and per-command DIX flags.
Link: https://lore.kernel.org/r/20210609033929.3815-4-martin.petersen@oracle.com
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <20210609033929.3815-4-martin.petersen@oracle.com>
The continue statement at the end of the for-loop is redundant, remove it.
Link: https://lore.kernel.org/r/20210702131542.19880-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Continue has no effect")
This is a set of minor fixes and clean ups in the core and various
drivers. The only core change in behaviour is the I/O retry for
spinup notify, but that shouldn't impact anything other than the
failing case.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYOqWWyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYBtAQCpqVdl
Axi1SpD6/UuKOgRmboWscoKD8FLHwvLDMRyCRQEAnLu3XdB9HcQrwZOkTG14vrfB
q2XB5cP4XAITxFLN1qo=
=9AO9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes and clean ups in the core and various
drivers.
The only core change in behaviour is the I/O retry for spinup notify,
but that shouldn't impact anything other than the failing case"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
scsi: virtio_scsi: Add validation for residual bytes from response
scsi: ipr: System crashes when seeing type 20 error
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
scsi: mpi3mr: Fix warnings reported by smatch
scsi: qedf: Add check to synchronize abort and flush
scsi: MAINTAINERS: Add mpi3mr driver maintainers
scsi: libfc: Fix array index out of bound exception
scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
scsi: qedf: Use DEVICE_ATTR_RO() macro
scsi: qedi: Use DEVICE_ATTR_RO() macro
scsi: message: mptfc: Switch from pci_ to dma_ API
scsi: be2iscsi: Fix some missing space in some messages
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
scsi: ufs: Fix build warning without CONFIG_PM
scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
scsi: qla2xxx: Add heartbeat check
scsi: virtio_scsi: Do not overwrite SCSI status
scsi: libsas: Add LUN number check in .slave_alloc callback
scsi: core: Inline scsi_mq_alloc_queue()
...
This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers. The major core change is a rework
to drop the status byte handling macros and the old bit shifted
definitions and the rest of the updates are minor fixes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYN7I6iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpRAQCkngYZ
35yQrqOxgOk2pfrysE95tHrV1MfJm2U49NFTwAEAuZutEvBUTfBF+sbcJ06r6q7i
H0hkJN/Io7enFs5v3WA=
=zwIa
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers.
The major core change is a rework to drop the status byte handling
macros and the old bit shifted definitions and the rest of the updates
are minor fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
scsi: aha1740: Avoid over-read of sense buffer
scsi: arcmsr: Avoid over-read of sense buffer
scsi: ips: Avoid over-read of sense buffer
scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
scsi: elx: libefc: Fix less than zero comparison of a unsigned int
scsi: elx: efct: Fix pointer error checking in debugfs init
scsi: elx: efct: Fix is_originator return code type
scsi: elx: efct: Fix link error for _bad_cmpxchg
scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
scsi: elx: efct: Fix error handling in efct_hw_init()
scsi: elx: efct: Remove redundant initialization of variable lun
scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
scsi: lpfc: Fix build error in lpfc_scsi.c
scsi: target: iscsi: Remove redundant continue statement
scsi: qla4xxx: Remove redundant continue statement
scsi: ppa: Switch to use module_parport_driver()
scsi: imm: Switch to use module_parport_driver()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
...
Use "no-op" mailbox command to check if the adapter firmware is still
responsive.
Link: https://lore.kernel.org/r/20210619052427.6440-1-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Using list_move_tail() instead of list_del() + list_add_tail().
Link: https://lore.kernel.org/r/20210609072321.1356896-1-libaokun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Include Hannes' SCSI command result rework in the staging branch.
[mkp: remove DRIVER_SENSE from mpi3mr]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pass in fcport->vha to ql_log() in order to add the PCI address to the log.
Currently NULL is passed in which gives this confusing log entry:
> qla2xxx [0000:00:00.0]-2112: : qla_nvme_unregister_remote_port: unregister remoteport on 0000000009d6a2e9 50000973981648c7
Link: https://lore.kernel.org/r/20210531122444.116655-1-dwagner@suse.de
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer()
to format the buffer and set the correct SCSI status.
Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Target de-configuration panics at high CPU load because TPGT and WWPN can
be removed on separate threads.
TPGT removal requests a reset HBA on a separate thread and waits for reset
complete (phase1). Due to high CPU load that HBA reset can be delayed for
some time.
WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has
already completed and thus tgt.tgt_ops is subsequently cleared. However,
tgt.tgt_ops is needed to process incoming traffic and therefore this will
cause one of the following panics:
NIP qlt_reset+0x7c/0x220 [qla2xxx]
LR qlt_reset+0x68/0x220 [qla2xxx]
Call Trace:
0xc000003ffff63a78 (unreliable)
qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx]
qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx]
qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]
or
NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx]
LR qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx]
Call Trace:
qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable)
qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]
or
NIP qlt_create_sess+0x90/0x4e0 [qla2xxx]
LR qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
Call Trace:
0xc0000000348fba30 (unreliable)
qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
qla2x00_do_work+0x674/0xbf0 [qla2xxx]
qla2x00_iocb_work_fn
The patch fixes the issue by serializing qlt_stop_phase1() and
qlt_stop_phase2() functions to make WWPN removal wait for phase1
completion.
Link: https://lore.kernel.org/r/20210415203554.27890-1-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable rval is set to QLA_SUCCESS but this value is never read as it is
overwritten later on. Hence it is a redundant assignment and can be
removed.
Clean up the following clang-analyzer warning:
drivers/scsi/qla2xxx/qla_init.c:4359:2: warning: Value stored to 'rval'
is never read [clang-analyzer-deadcode.DeadStores].
Link: https://lore.kernel.org/r/1620643206-127930-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix to return a negative error code from the error handling case instead of
0 as done elsewhere in this function.
Link: https://lore.kernel.org/r/20210514090952.6715-1-thunder.leizhen@huawei.com
Fixes: a9083016a5 ("[SCSI] qla2xxx: Add ISP82XX support.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a case when the initiator in P2P mode by some circumstances does not
send PRLI, the target, in a case when the target port's WWPN is less than
initiator's, changes the discovery state in DSC_GNL. When gnl completes it
sends PRLI to the initiator.
Usually the initiator in P2P mode always sends PRLI. We caught this issue
on Linux stable v5.4.6 https://www.spinics.net/lists/stable/msg458515.html.
Fix this particular corner case in the behaviour of the P2P mod target
login state machine.
Link: https://lore.kernel.org/r/20210422153414.4022-1-a.kovaleva@yadro.com
Fixes: a9ed06d4e6 ("scsi: qla2xxx: Allow PLOGI in target mode")
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit a6dcfe0848 ("scsi: qla2xxx: Limit interrupt vectors to number of
CPUs") lowers the number of allocated MSI-X vectors to the number of CPUs.
That breaks vector allocation assumptions in qla83xx_iospace_config(),
qla24xx_enable_msix() and qla2x00_iospace_config(). Either of the functions
computes maximum number of qpairs as:
ha->max_qpairs = ha->msix_count - 1 (MB interrupt) - 1 (default
response queue) - 1 (ATIO, in dual or pure target mode)
max_qpairs is set to zero in case of two CPUs and initiator mode. The
number is then used to allocate ha->queue_pair_map inside
qla2x00_alloc_queues(). No allocation happens and ha->queue_pair_map is
left NULL but the driver thinks there are queue pairs available.
qla2xxx_queuecommand() tries to find a qpair in the map and crashes:
if (ha->mqenable) {
uint32_t tag;
uint16_t hwq;
struct qla_qpair *qpair = NULL;
tag = blk_mq_unique_tag(cmd->request);
hwq = blk_mq_unique_tag_to_hwq(tag);
qpair = ha->queue_pair_map[hwq]; # <- HERE
if (qpair)
return qla2xxx_mqueuecommand(host, cmd, qpair);
}
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 72 Comm: kworker/u4:3 Tainted: G W 5.10.0-rc1+ #25
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Workqueue: scsi_wq_7 fc_scsi_scan_rport [scsi_transport_fc]
RIP: 0010:qla2xxx_queuecommand+0x16b/0x3f0 [qla2xxx]
Call Trace:
scsi_queue_rq+0x58c/0xa60
blk_mq_dispatch_rq_list+0x2b7/0x6f0
? __sbitmap_get_word+0x2a/0x80
__blk_mq_sched_dispatch_requests+0xb8/0x170
blk_mq_sched_dispatch_requests+0x2b/0x50
__blk_mq_run_hw_queue+0x49/0xb0
__blk_mq_delay_run_hw_queue+0xfb/0x150
blk_mq_sched_insert_request+0xbe/0x110
blk_execute_rq+0x45/0x70
__scsi_execute+0x10e/0x250
scsi_probe_and_add_lun+0x228/0xda0
__scsi_scan_target+0xf4/0x620
? __pm_runtime_resume+0x4f/0x70
scsi_scan_target+0x100/0x110
fc_scsi_scan_rport+0xa1/0xb0 [scsi_transport_fc]
process_one_work+0x1ea/0x3b0
worker_thread+0x28/0x3b0
? process_one_work+0x3b0/0x3b0
kthread+0x112/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x22/0x30
The driver should allocate enough vectors to provide every CPU it's own HW
queue and still handle reserved (MB, RSP, ATIO) interrupts.
The change fixes the crash on dual core VM and prevents unbalanced QP
allocation where nr_hw_queues is two less than the number of CPUs.
Link: https://lore.kernel.org/r/20210412165740.39318-1-r.bolshakov@yadro.com
Fixes: a6dcfe0848 ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs")
Cc: Daniel Wagner <daniel.wagner@suse.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org # 5.11+
Reported-by: Aleksandr Volkov <a.y.volkov@yadro.com>
Reported-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Eliminate the following coccicheck warning:
drivers/scsi/qla2xxx/qla_os.c:4622:2-7:
WARNING: NULL check before some freeing functions is not needed.
drivers/scsi/qla2xxx/qla_os.c:4637:3-8:
WARNING: NULL check before some freeing functions is not needed.
Link: https://lore.kernel.org/r/20210409120925.7122-1-linqiheng@huawei.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for
some UFS changes that would otherwise cause conflicts during the
merge.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Perform logout of all remote ports so that all I/Os with driver are
requeued with midlayer for retry.
Link: https://lore.kernel.org/r/20210329085229.4367-12-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For the mailbox thread that encounters a PCIe error, pause that thread
until PCIe link reset/recovery has completed to prevent the thread from
possibly unmapping any type of DMA resource that might be in progress.
Link: https://lore.kernel.org/r/20210329085229.4367-10-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After RISC RESET, the poll time for completion is too short. Fix the
completion polling time.
Link: https://lore.kernel.org/r/20210329085229.4367-8-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On bsg command completion, bsg_job_done() was called while qla driver
continued to access the bsg_job buffer. bsg_job_done() would free up
resources that ended up being reused by other task while the driver
continued to access the buffers. As a result, driver was reading garbage
data.
localhost kernel: BUG: KASAN: use-after-free in sg_next+0x64/0x80
localhost kernel: Read of size 8 at addr ffff8883228a3330 by task swapper/26/0
localhost kernel:
localhost kernel: CPU: 26 PID: 0 Comm: swapper/26 Kdump:
loaded Tainted: G OE --------- - - 4.18.0-193.el8.x86_64+debug #1
localhost kernel: Hardware name: HP ProLiant DL360
Gen9/ProLiant DL360 Gen9, BIOS P89 08/12/2016
localhost kernel: Call Trace:
localhost kernel: <IRQ>
localhost kernel: dump_stack+0x9a/0xf0
localhost kernel: print_address_description.cold.3+0x9/0x23b
localhost kernel: kasan_report.cold.4+0x65/0x95
localhost kernel: debug_dma_unmap_sg.part.12+0x10d/0x2d0
localhost kernel: qla2x00_bsg_sp_free+0xaf6/0x1010 [qla2xxx]
Link: https://lore.kernel.org/r/20210329085229.4367-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Consolidate zio threshold setting for both FCP & NVMe to prevent one
protocol from clobbering the setting of the other protocol.
Link: https://lore.kernel.org/r/20210329085229.4367-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Session was stuck due to explicit logout to target timing out. The target
was in an unresponsive state. This timeout induced an error to the GNL
command from moving forward.
Link: https://lore.kernel.org/r/20210329085229.4367-4-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The host:channel:scsi_target_id information is helpful in matching an FC
port with a SCSI device, so add it. For initiator FC ports, a -1 would be
displayed for "target" part.
Link: https://lore.kernel.org/r/20210329085229.4367-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Removing the response queue processing in the send path is showing IOPS
drop. Add back the process_response_queue() call in the send path.
Link: https://lore.kernel.org/r/20210329085229.4367-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes the following Coverity warning:
CID 361199 (#1 of 1): Unchecked return value (CHECKED_RETURN)
3. check_return: Calling qla24xx_get_isp_stats without checking return
value (as is done elsewhere 4 out of 5 times).
Link: https://lore.kernel.org/r/20210320232359.941-7-bvanassche@acm.org
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Lee Duncan <lduncan@suse.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes the following Coverity complaint:
CID 177490 (#1 of 1): Unused value (UNUSED_VALUE)
assigned_value: Assigning value from opcode & 0xffffff7fU to opcode
here, but that stored value is overwritten before it can be used.
Link: https://lore.kernel.org/r/20210320232359.941-6-bvanassche@acm.org
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change dseq_rq and dseg_rsp from scalar structure members into
single-element arrays such that Coverity does not complain about the
(*cur_dsd)++ statement in append_dsd64().
Link: https://lore.kernel.org/r/20210320232359.941-5-bvanassche@acm.org
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the target function pointers are not modified at runtime, declare the
data structure with the target function pointers const.
Link: https://lore.kernel.org/r/20210320232359.941-3-bvanassche@acm.org
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calling vha->hw->tgt.tgt_ops->free_cmd() from qlt_xmit_response() is wrong
since the command for which a response is sent must remain valid until the
SCSI target core calls .release_cmd(). It has been observed that the
following scenario triggers a kernel crash:
- qlt_xmit_response() calls qlt_check_reserve_free_req()
- qlt_check_reserve_free_req() returns -EAGAIN
- qlt_xmit_response() calls vha->hw->tgt.tgt_ops->free_cmd(cmd)
- transport_handle_queue_full() tries to retransmit the response
Fix this crash by reverting the patch that introduced it.
Link: https://lore.kernel.org/r/20210320232359.941-2-bvanassche@acm.org
Fixes: 0dcec41acb ("scsi: qla2xxx: Make sure that aborted commands are freed")
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Only half of the file is under include guard because terminating #endif
is placed too early.
Link: https://lore.kernel.org/r/YE4snvoW1SuwcXAn@localhost.localdomain
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use dma_pool_zalloc() instead of dma_pool_alloc() and memset().
Link: https://lore.kernel.org/r/1615603275-14303-1-git-send-email-wangqing@vivo.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla2xxx/qla_target.c:6476: warning: expecting prototype for qla_tgt_lport_register(). Prototype was for qlt_lport_register() instead
drivers/scsi/qla2xxx/qla_target.c:6546: warning: expecting prototype for qla_tgt_lport_deregister(). Prototype was for qlt_lport_deregister() instead
Link: https://lore.kernel.org/r/20210312094738.2207817-12-lee.jones@linaro.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Vladislav Bolkhovitin <vst@vlnb.net>
Cc: Nathaniel Clark <nate@misrule.us>
Cc: "Nicholas A. Bellinger" <nab@kernel.org>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla2xxx/qla_nx2.c:2038: warning: expecting prototype for qla4_8xxx_check_temp(). Prototype was for qla8044_check_temp() instead
Link: https://lore.kernel.org/r/20210312094738.2207817-11-lee.jones@linaro.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla2xxx/qla_mr.c:525: warning: expecting prototype for qlafx00_warm_reset(). Prototype was for qlafx00_soc_cpu_reset() instead
drivers/scsi/qla2xxx/qla_mr.c:2869: warning: expecting prototype for qlafx00x_mbx_completion(). Prototype was for qlafx00_mbx_completion() instead
Link: https://lore.kernel.org/r/20210312094738.2207817-9-lee.jones@linaro.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla2xxx/qla_gs.c:1259: warning: expecting prototype for qla2x00_snd_rft_id(). Prototype was for qla2x00_sns_rft_id() instead
drivers/scsi/qla2xxx/qla_gs.c:1492: warning: expecting prototype for qla2x00_prep_ct_req(). Prototype was for qla2x00_prep_ct_fdmi_req() instead
drivers/scsi/qla2xxx/qla_gs.c:1596: warning: expecting prototype for perform HBA attributes registration(). Prototype was for qla2x00_hba_attributes() instead
drivers/scsi/qla2xxx/qla_gs.c:1851: warning: expecting prototype for perform Port attributes registration(). Prototype was for qla2x00_port_attributes() instead
drivers/scsi/qla2xxx/qla_gs.c:2284: warning: expecting prototype for perform RPRT registration(). Prototype was for qla2x00_fdmi_rprt() instead
Link: https://lore.kernel.org/r/20210303144631.3175331-24-lee.jones@linaro.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
tcm_loop could be used like a normal block device, so we can't use
GFP_KERNEL and should use GFP_NOIO. This adds a gfp_t arg to
target_cmd_init_cdb() and converts the users. For every driver but loop
GFP_KERNEL is kept.
This will also be useful in subsequent patches where loop needs to do
target_submit_prep() from interrupt context to get a ref to the se_device,
and so it will need to use GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210227170006.5077-16-michael.christie@oracle.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
target_submit_cmd() is now only for simple drivers that do their
own sync during shutdown and do not use target_stop_session().
tcm_qla2xxx uses target_stop_session() to sync session shutdown with LIO
core, so we use target_init_cmd()/target_submit_prep()/target_submit(),
because target_init_cmd() will detect the target_stop_session() call and
return an error.
Link: https://lore.kernel.org/r/20210227170006.5077-8-michael.christie@oracle.com
Cc: Nilesh Javali <njavali@marvell.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warnings:
./drivers/scsi/qla2xxx/qla_target.c:984:12-14: WARNING !A || A && B is
equivalent to !A || B.
Link: https://lore.kernel.org/r/1612319190-111421-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warnings:
./drivers/scsi/qla2xxx/qla_nvme.c:288:24-26: WARNING !A || A && B is
equivalent to !A || B.
Link: https://lore.kernel.org/r/1611650554-33019-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This was supposed to be "data" instead of "&data". The current code will
corrupt the stack.
Link: https://lore.kernel.org/r/YA6E0geUlL9Hs04A@mwanda
Fixes: dbf1f53cfd ("scsi: qla2xxx: Implementation to get and manage host, target stats and initiator port")
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UFS core has received a substantial rework this cycle. This in
turn has caused a merge conflict in linux-next. Merge 5.11/scsi-fixes
into 5.12/scsi-queue and resolve the conflict.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix below warnings reported by coccicheck:
./drivers/scsi/qla2xxx/qla_init.c:3371:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7855:5-10: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7916:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8113:4-18: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8174:2-7: WARNING: NULL check before
some freeing functions is not needed.
Link: https://lore.kernel.org/r/1611306174-92627-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The list iterator can't be NULL so this check is not required. Removing
the check silences a Smatch warning about inconsistent NULL checking.
drivers/scsi/qla2xxx/qla_dfs.c:371 qla_dfs_tgt_counters_show()
error: we previously assumed 'fcport' could be null (see line 372)
Link: https://lore.kernel.org/r/YAkaaSrhn1mFqyHy@mwanda
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warnings:
./drivers/scsi/qla2xxx/qla_isr.c:780:2-18: WARNING: Assignment
of 0/1 to bool variable.
Link: https://lore.kernel.org/r/1611127919-56551-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fc_remote_port_chkready() returns a SCSI result value, not the port
status. Fix the value returned when the remote port isn't set.
Link: https://lore.kernel.org/r/20210113090500.129644-34-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mailbox Ch/dump ram extend expects mb register 10 to be set. If not
set/clear, firmware can pick up garbage from previous invocation of this
mailbox. Example: mctp dump can set mb10. On subsequent flash read which
use mailbox cmd Ch, mb10 can retain previous value.
Link: https://lore.kernel.org/r/20210111093134.1206-6-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This change will aid in debugging issues arising because of dropped frame,
DIF errors, queue full etc where debug level is not set.
Link: https://lore.kernel.org/r/20210111093134.1206-4-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This statistics will help in debugging process and checking specific error
counts. It also provides a capability to isolate the port or bring it out
of isolation.
Link: https://lore.kernel.org/r/20210111093134.1206-2-njavali@marvell.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, qla2xxx,
smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of
cleanups, a major power management rework and a load of assorted minor
updates. There are a few core updates (formatting fixes being the big
one) but nothing major this cycle.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN
J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w
hwhOv6Uto89gLCWSEz8=
=KUPT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
Due to a bug in the older scan logic, when a once lost device re-appeared,
it was not discovered. Fix this by resetting login_retry counter upon
device discovery.
This is applicable only for 4G and older HBAs.
Link: https://lore.kernel.org/r/20201202132312.19966-15-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Flash update failed due to missing endian conversion in FLT region access
as well as in checksum computation.
Link: https://lore.kernel.org/r/20201202132312.19966-12-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FC-NVMe target discovery failed when initiator wwpn < target wwpn in an N2N
(Direct Attach) config, where the driver was stuck on FCP PRLI mode and
failed to retry with NVMe PRLI.
Link: https://lore.kernel.org/r/20201202132312.19966-10-njavali@marvell.com
Fixes: 84ed362ac4 ("scsi: qla2xxx: Dual FCP-NVMe target port support”)
Fixes: 983f127603 ("scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure”)
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix compile time errors reported on PPC systems,
qla_gbl.h:991:20: error: inlining failed in call to always_inline
‘qla_nvme_abort_set_option’: function body not available
Link: https://lore.kernel.org/r/20201202132312.19966-7-njavali@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
NVMe commands can come only after successful addition of rport and NVMe
connect, and rport is only registered after FW started bit is set. Remove
the redundant check.
Link: https://lore.kernel.org/r/20201202132312.19966-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver created too many QPairs(126) with 28xx adapter. Limit to the number
of CPUs to minimize wasted resources.
Link: https://lore.kernel.org/r/20201202132312.19966-4-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the fcport is about to be deleted we should return EBUSY instead of
ENODEV. Only for EBUSY will the request be requeued in a multipath setup.
Also return EBUSY when the firmware has not yet started to avoid dropping
the request.
Link: https://lore.kernel.org/r/20201014073048.36219-1-dwagner@suse.de
Link: https://lore.kernel.org/r/20201202132312.19966-2-njavali@marvell.com
Reviewed-by: Arun Easi <aeasi@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The macro use will already have a semicolon. Remove unneeded escaped
newline.
Link: https://lore.kernel.org/r/20201130205509.3447316-1-trix@redhat.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qla83xx_wait_logic() is used to control the frequency of device IDC lock
retries. If in_interrupt() is true, it does 20 loops of cpu_relax().
Otherwise, it sleeps for 100ms and yields the CPU.
While in_interrupt() is ill-defined and does not provide what the name
suggests, it is not needed here: that qla83xx_wait_logic() is exclusively
called by qla83xx_idc_lock() / unlock(), and they always run from process
context. Below is an analysis of all the idc lock/unlock callers, in order
of appearance:
- qla_os.c:
qla83xx_nic_core_unrecoverable_work(),
qla83xx_idc_state_handler_work(),
qla83xx_nic_core_reset_work(),
qla83xx_service_idc_aen(), all workqueue context
- qla_os.c: qla83xx_check_nic_core_fw_alive(), has msleep()
- qla_os.c: qla83xx_set_drv_presence(), called once from
qla2x00_abort_isp(), which is bound to process-context ->abort_isp()
hook. It also invokes wait_for_completion_timeout() through the chain
qla2x00_configure_hba() => qla24xx_link_initialize() =>
qla2x00_mailbox_command().
- qla_os.c: qla83xx_clear_drv_presence(), which is called from
qla2x00_abort_isp() discussed above, and from qla2x00_remove_one()
which is PCI process-context ->remove() hook.
- qla_os.c: qla83xx_need_reset_handler(), has a one second msleep() in
a loop.
- qla_os.c: qla83xx_device_bootstrap(), called only by
qla83xx_idc_state_handler(), which has multiple msleep()
invocations.
- qla_os.c: qla83xx_idc_state_handler(), multiple msleep()
invocations.
- qla_attr.c: qla2x00_sysfs_write_reset(), sysfs bin_attribute
->write() hook, process context
- qla_init.c: qla83xx_nic_core_fw_load()
=> qla_init.c: qla2x00_initialize_adapter()
=> bound to isp_operations ->initialize_adapter() hook
** => qla_os.c: qla2x00_probe_one(), PCI ->probe() process ctx
- qla_init.c: qla83xx_initiating_reset(), msleep() in a loop.
- qla_init.c: qla83xx_nic_core_reset(), called by
qla83xx_nic_core_reset_work(), workqueue context.
Remove the in_interrupt() check, and thus replace the entirety of
qla83xx_wait_logic() with an msleep(QLA83XX_WAIT_LOGIC_MS).
Mark qla83xx_idc_lock() / unlock() with "Context: task, can sleep".
Link: https://lore.kernel.org/r/20201126132952.2287996-7-bigeasy@linutronix.de
Cc: Nilesh Javali <njavali@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
tcm_qla2xxx_free_session() has a BUG_ON(in_interrupt()).
While in_interrupt() is ill-defined and does not provide what the name
suggests, it is not needed here: the function is always invoked from
workqueue context through "struct qla_tgt_func_tmpl" ->free_session() hook
it is bound to.
The function also calls wait_event_timeout() down the chain, which already
has a might_sleep().
Remove the in_interrupt() check.
Link: https://lore.kernel.org/r/20201126132952.2287996-6-bigeasy@linutronix.de
Cc: Nilesh Javali <njavali@marvell.com>
Cc: <GR-QLogic-Storage-Upstream@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qla82xx_idc_lock() spins on a certain hardware state until it's updated. At
the end of each spin, if in_interrupt() is true, it does 20 loops of
cpu_relax(). Otherwise, it yields the CPU.
While in_interrupt() is ill-defined and does not provide what the name
suggests, it is not needed here: qla82xx_idc_lock() is always called from
process context. Below is an analysis of its callers, in order of
appearance:
- qla_nx.c: qla82xx_device_bootstrap(), only called by
qla82xx_device_state_handler(), has multiple msleep()s.
- qla_nx.c: qla82xx_need_qsnt_handler(), has one second msleep()
- qla_nx.c: qla82xx_wait_for_state_change(), one second msleep()
- qla_nx.c: qla82xx_need_reset_handler(), can sleep up to 10 seconds
- qla_nx.c: qla82xx_device_state_handler(), has multiple msleep()s
- qla_nx.c: qla82xx_abort_isp(), if it's a qla82xx controller, calls
qla82xx_device_state_handler(), which sleeps. It's also bound to
isp_operations ->abort_isp() hook, where all the callers are in process
context.
- qla_nx.c: qla82xx_beacon_on(), bound to isp_operations ->beacon_on()
hook. That hook is only called once, in a mutex locked context, from
qla2x00_beacon_store().
- qla_nx.c: qla82xx_beacon_off(), bound to isp_operations ->beacon_off()
hook. Like ->beacon_on(), it's only called once, in a mutex locked
context, from qla2x00_beacon_store().
- qla_nx.c: qla82xx_fw_dump(), calls qla2x00_wait_for_chip_reset(), which
has msleep() in a loop. It is bound to isp_operations ->fw_dump()
hook. That hook *is* called from atomic context at qla_isr.c by
multiple interrupt handlers. Nonetheless, it's other controllers
interrupt handlers, and not the qla82xx.
- qla82xx_msix_default() and qla82xx_msix_rsp_q() call
qla24xx_process_response_queue() which doesn't implement the firmware
dumping.
- qla_attr.c: qla2x00_sysfs_write_fw_dump(), and
qla2x00_sysfs_write_reset(), process-context sysfs ->write() hooks.
- qla_os.c: qla2x00_probe_one(). PCI ->probe(), process context.
- qla_os.c: qla2x00_clear_drv_active(), called solely from
qla2x00_remove_one(), which is PCI ->remove() hook, process context.
- qla_os.c: qla2x00_do_dpc(), kthread function, process context.
Remove the in_interrupt() check. Change qla82xx_idc_lock() specification to
a purely process-context function. Mark it with "Context: task, might
sleep".
Change qla82xx_idc_lock() implementation to sleep 100ms, instead of a
schedule(), for each spin. This is more deterministic, and it matches the
other qla models idc_lock() functions.
Link: https://lore.kernel.org/r/20201126132952.2287996-5-bigeasy@linutronix.de
Cc: Nilesh Javali <njavali@marvell.com>
Cc: <GR-QLogic-Storage-Upstream@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Drop the sess_cmd_lock by:
- Removing the sess_cmd_list use from LIO core, because it's been
moved to qla2xxx.
- Removing sess_tearing_down check in the I/O path. Instead of using that
bit and the sess_cmd_lock, we rely on the cmd_count percpu ref. To do
this we switch to percpu_ref_kill_and_confirm/percpu_ref_tryget_live.
Link: https://lore.kernel.org/r/1604257174-4524-7-git-send-email-michael.christie@oracle.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Except for debug output in the shutdown path, tcm_qla2xxx is the only
driver using the se_session sess_cmd_list. Move the list to that driver to
facilitate removing the sess_cmd_lock from the main I/O path for the rest
of the drivers.
Link: https://lore.kernel.org/r/1604257174-4524-6-git-send-email-michael.christie@oracle.com
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Only the __qlt_24xx_handle_abts() code path does not know the LUN for an
abort and it uses the TARGET_SCF_LOOKUP_LUN_FROM_TAG flag to have LIO core
look it up. LIO uses target_lookup_lun_from_tag to go from cmd tag to LUN
for the driver. However, qla2xxx has a tcm_qla2xxx_find_cmd_by_tag() which
does almost the same thing as the LIO helper (it finds the cmd but does not
return the LUN). This patch has qla2xxx use its internal helper.
Link: https://lore.kernel.org/r/1604257174-4524-4-git-send-email-michael.christie@oracle.com
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Four driver fixes and one core fix. The core fix closes a race window
where we could kick off a second asynchronous scan because the test
and set of the variable preventing it isn't atomic.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX5xLJCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQUrAP4w7L6f
2+4qDP4ixfRMDtJmKhQVgTlm013Fx+rEGX03PQEAors1xBSTDvoG0ZnP+KbIs4qW
d2Q3WTRIQ4EFUs1W/nI=
=cZos
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four driver fixes and one core fix.
The core fix closes a race window where we could kick off a second
asynchronous scan because the test and set of the variable preventing
it isn't atomic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Stop using queue #0 always for v2 hw
scsi: ibmvscsi: Fix potential race after loss of transport
scsi: mptfusion: Fix null pointer dereferences in mptscsih_remove()
scsi: qla2xxx: Return EBUSY on fcport deletion
scsi: core: Don't start concurrent async scan on same host
The code to try to shut up sparse warnings about questionable locking
didn't shut up sparse: it made the result not parse as valid C at all,
since the end result now has a label with no statement.
The proper fix is to just always lock the hardware, the same way Bart
did in commit 8ae178760b ("scsi: qla2xxx: Simplify the functions for
dumping firmware"). That avoids the whole problem with having locking
that is not statically obvious.
But in the meantime, just remove the incorrect attempt at trying to
avoid a sparse warning that just made things worse.
This was exposed by commit 3e6efab865 ("scsi: qla2xxx: Fix reset of
MPI firmware"), very similarly to how commit cbb01c2f2f ("scsi:
qla2xxx: Fix MPI failure AEN (8200) handling") exposed the same problem
in another place, and caused that commit 8ae178760b.
Please don't add code to just shut up sparse without actually fixing
what sparse complains about.
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Arun Easi <aeasi@marvell.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the fcport is about to be deleted we should return EBUSY instead of
ENODEV. Only for EBUSY will the request be requeued in a multipath setup.
Also return EBUSY when the firmware has not yet started to avoid dropping
the request.
Link: https://lore.kernel.org/r/20201014073048.36219-1-dwagner@suse.de
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed. The other main changes are two
driver updates (arcmsr, pm80xx) and assorted minor clean ups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX5MkQCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRkuAPsEAR/W
NS7J7j66rF2x15xGR2CNB4R6FEBSd/hdOPp7cQEA4rtLKKI53W4oydKsfTux6N6o
MLZJIHM5nTitk++AVQs=
=QgpC
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed.
The other main changes are two driver updates (arcmsr, pm80xx) and
assorted minor clean ups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
scsi: qla2xxx: Fix return of uninitialized value in rval
scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands
scsi: sr: Initialize ->cmd_len
scsi: arcmsr: Update driver version to v1.50.00.02-20200819
scsi: arcmsr: Add support for ARC-1886 series RAID controllers
scsi: arcmsr: Fix device hot-plug monitoring timer stop
scsi: arcmsr: Remove unnecessary syntax
scsi: pm80xx: Driver version update
scsi: pm80xx: Increase the number of outstanding I/O supported to 1024
scsi: pm80xx: Remove DMA memory allocation for ccb and device structures
scsi: pm80xx: Increase number of supported queues
scsi: sym53c8xx_2: Fix sizeof() mismatch
scsi: isci: Fix a typo in a comment
scsi: qla4xxx: Fix inconsistent format argument type
scsi: myrb: Fix inconsistent format argument types
scsi: myrb: Remove redundant assignment to variable timeout
scsi: bfa: Fix error return in bfad_pci_init()
scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup()
scsi: snic: Simplify the return expression of svnic_cq_alloc()
scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc()
...
Here are some SPDX-specific changes for 5.10-rc1.
They include:
- driver fixes to make spdxcheck.pl work properly
- add GFDL licenses as "deprecated" but required due to some of
our documentation using them
- add Zlib license as "deprecated" but required because we have
code with this license in the tree.
- convert some drivers to have SPDX identifiers that previously
didn't have them.
All have been in linux-next for a very long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c6oA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl35ACg2i+pP5CBExSzQUtA1Tx/UD2CVNMAoIAQChwj
SHZurDuyHkEiCdB+5n1u
=C9qR
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are some SPDX-specific changes for 5.10-rc1.
They include:
- driver fixes to make spdxcheck.pl work properly
- add GFDL licenses as "deprecated" but required due to some of our
documentation using them
- add Zlib license as "deprecated" but required because we have code
with this license in the tree.
- convert some drivers to have SPDX identifiers that previously
didn't have them.
All have been in linux-next for a very long time with no reported
issues"
* tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
scripts/spdxcheck.py: handle license identifiers in XML comments
net/mlx5: IPsec: make spdxcheck.py happy
LICENSES/deprecated: add Zlib license text
LICENSE: add GFDL deprecated licenses
net/qla3xxx: Convert to SPDX license identifiers
net/qlge: Convert to SPDX license identifiers
net/qlcnic: Convert to SPDX license identifiers
scsi/qla2xxx: Convert to SPDX license identifiers
scsi/qla4xxx: Convert to SPDX license identifiers
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug
fixes. There are only three core changes: adding sense codes,
cleaning up noretry and adding an option for limitless retries.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX4YulyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaZDAQCT7rwG
UEZYHgYkU9EX9ERVBQM0SW4mLrxf3g3P5ioJsAEAtkclCM4QsIOP+MIPjIa0EyUY
khu0kcrmeFR2YwA8zhw=
=4w4S
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
A previous change removed the initialization of rval and there is now an
error where an uninitialized rval is being returned on an error return
path. Fix this by returning -ENODEV.
Link: https://lore.kernel.org/r/20201008183239.200358-1-colin.king@canonical.com
Fixes: b994718760 ("scsi: qla2xxx: Use constant when it is known")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Uninitialized scalar variable")
clang static analysis reports this problem:
qla_nx2.c:694:3: warning: 6th function call argument is
an uninitialized value
ql_log(ql_log_fatal, vha, 0xb090,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In qla8044_poll_reg(), when reading the reg fails, the error is reported by
reusing the timeout error reporter. Because the value is unset, a garbage
value will be reported. Initialize the value.
Link: https://lore.kernel.org/r/20201005144544.25335-1-trix@redhat.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qla2xx_process_get_sp_from_handle() will clear the slot in which the
current srb is stored. As a result it can't be used in
qla24xx_process_mbx_iocb_response() to check for consistency and later
again in qla24xx_mbx_iocb_entry().
Move the consistency check directly into qla24xx_mbx_iocb_entry() and avoid
the double call or any open coding of the
qla2xx_process_get_sp_from_handle() functionality.
Link: https://lore.kernel.org/r/20200929073802.18770-1-dwagner@suse.de
Fixes: 31a3271ff1 ("scsi: qla2xxx: Handle incorrect entry_type entries")
Reviewed-by: Arun Easi <aeasi@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Directly return constant when it is known to make code easier to
understand.
Link: https://lore.kernel.org/r/20200921112340.GA19336@duo.ucw.cz
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following warning:
[drivers/scsi/qla2xxx/qla_dbg.c:2451]: (warning) %ld in format string (no. 4)
requires 'long' but the argument type is 'unsigned long'.
Link: https://lore.kernel.org/r/20200930022515.2862532-4-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following warnings:
[drivers/scsi/qla2xxx/qla_os.c:4882]: (warning) %ld in format string (no. 2)
requires 'long' but the argument type is 'unsigned long'.
[drivers/scsi/qla2xxx/qla_os.c:5011]: (warning) %ld in format string (no. 1)
requires 'long' but the argument type is 'unsigned long'.
Link: https://lore.kernel.org/r/20200930022515.2862532-3-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following warnings:
[drivers/scsi/qla2xxx/tcm_qla2xxx.c:884]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'signed int'.
[drivers/scsi/qla2xxx/tcm_qla2xxx.c:885]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'signed int'.
[drivers/scsi/qla2xxx/tcm_qla2xxx.c:886]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'signed int'.
[drivers/scsi/qla2xxx/tcm_qla2xxx.c:887]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'signed int'.
[drivers/scsi/qla2xxx/tcm_qla2xxx.c:888]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'signed int'.
Link: https://lore.kernel.org/r/20200930022515.2862532-2-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver was using a shorter timeout waiting for PLOGI from the peer in
point-to-point configurations. Some devices takes some time (~4 seconds) to
initiate the PLOGI. This peer initiating PLOGI is when the peer has a
higher P-WWN.
Increase the wait time based on N2N R_A_TOV.
Link: https://lore.kernel.org/r/20200929102152.32278-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On unload, session cleanup prematurely gave the signal for driver unload
path to advance.
Link: https://lore.kernel.org/r/20200929102152.32278-6-njavali@marvell.com
Fixes: 726b854870 ("qla2xxx: Add framework for async fabric discovery")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Normally, the MPI firmware is reset when an MPI dump is collected. If an
unsaved MPI dump exists in the driver, though, an alternate mechanism is
used. This mechanism, which was not fully correct, is not recommended and
instead an MPI dump template walk is suggested to perform the MPI reset.
To allow for the MPI dump template walk, extra space is reserved in the MPI
dump buffer which gets used only when there is already an MPI dump in
place.
Link: https://lore.kernel.org/r/20200929102152.32278-5-njavali@marvell.com
Fixes: cbb01c2f2f ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When printing the message:
"MPI Heartbeat stop. MPI reset is not needed.."
..the wrong register was checked leading to always printing that MPI reset
is not needed, even when it is needed. Fix the MPI reset message.
Link: https://lore.kernel.org/r/20200929102152.32278-4-njavali@marvell.com
Fixes: cbb01c2f2f ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current code uses wrong mailbox option to extract bbc from firmware. This
field is nested inside of PLOGI payload. Extract bbc from PLOGI template
payload.
Link: https://lore.kernel.org/r/20200929102152.32278-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the version string has been modified, sscanf() returns 4 instead of
6.
Link: https://lore.kernel.org/r/20200929102152.32278-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update internal driver version and remove module version macro.
Link: https://lore.kernel.org/r/20200904045128.23631-14-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
BIT_13 of extended FW attribute informs about NVMe-2 support. Set BIT_15
of special feature control block for enabling SLER in FW. Set bit 8 (SLER
supported) to 1 for the service parameter information when sending NVMe
PRLI request. Set BIT_14 of special feature control block for enabling PI
Control in FW. Driver should set bit 9 (PI Control supported) to 1 for the
service parameter information when sending NVMe PRLI request. Set BIT_13
for NVMe Async events.
Link: https://lore.kernel.org/r/20200904045128.23631-13-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch tracks number of IOCB resources used in the I/O fast path. If
the number of used IOCBs reach a high water limit, driver would return the
I/O as busy and let upper layer retry. This prevents over subscription of
IOCB resources where any future error recovery command is unable to cut
through. Enable IOCB throttling by default.
Link: https://lore.kernel.org/r/20200904045128.23631-12-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
tgt_port_database data is today exported only in target mode, allow it to
be shown in initiator mode as well.
Link: https://lore.kernel.org/r/20200904045128.23631-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In .fcp_io(), returning ENODEV as soon as remote port delete has started
can cause I/O errors. Fix this by returning EBUSY until the remote port
delete finishes.
Link: https://lore.kernel.org/r/20200904045128.23631-9-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Memory size calculations for Extended Login used in hardware offload got
truncated. Fix this by changing definition of exlogin_size to use uint32_t.
Link: https://lore.kernel.org/r/20200904045128.23631-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FCP-4 (referred FCP-4 rev-2b) identifies the earlier known "retry delay
timer" field as "status qualifier", which is described in SAM-5 and later
specs. This fix makes appropriate driver side modifications to honor the
new definition. The SAM document referred was SAM-6 rev-5.
Link: https://lore.kernel.org/r/20200904045128.23631-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create a base for adding remote port related entries in debugfs.
Link: https://lore.kernel.org/r/20200904045128.23631-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver was using a lower value for dev_loss_tmo making it more prone to I/O
failures during remote port toggle testing. Set dev_loss_tmo to zero during
remote port registration to allow nvme-fc default dev_loss_tmo to be used,
which is higher than what driver was using.
Link: https://lore.kernel.org/r/20200904045128.23631-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All files in this driver directory contain the following notice:
See LICENSE.qla2xxx for copyright and licensing details.
LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains:
- A copyright notice
This copyright notice is redundant as all files contain the same
copyright notice already
- A license notice
You may modify and redistribute the device driver code under the
GNU General Public License (a copy of which is attached hereto as
Exhibit A) published by the Free Software Foundation (version 2).
This can be replaced with the corresponding SPDX license identifier
(GPL-2.0-only) in the source files which reference this license
file.
- The full GPLv2 license text
A redundant copy of LICENSES/preferred/GPL-2.0
Remove the notices and add the SPDX license identifier GPL-2.0-only to the
source files.
Finally remove the now redundant LICENSE.qla2xxx file.
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This addresses the following coccinelle warning:
drivers/scsi/qla2xxx/qla_init.c:7112:5-9: Unneeded variable: "rval".
Return "QLA_SUCCESS" on line 7115
Link: https://lore.kernel.org/r/20200911091021.2937708-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It was observed on an ISP8324 16Gb HBA with fw=8.08.203 (d0d5) in a
PowerPC64 machine that pkt->entry_type was MBX_IOCB_TYPE/0x39 with an
sp->type SRB_SCSI_CMD which is invalid and should not be possible.
Reading the entry_type from the crash dump shows the expected value of
STATUS_TYPE/0x03 but the call trace shows that qla24xx_mbx_iocb_entry() is
used.
Add a check to verify for consistency and reset the HBA if an invalid state
is reached. Obviously, this is only a workaround until the real problem is
solved.
Link: https://lore.kernel.org/r/20200908081516.8561-5-dwagner@suse.de
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 7c3df1320e ("[SCSI] qla2xxx: Code changes to support new dynamic
logging infrastructure.") removed the use of the func argument. Let's add
it back.
Link: https://lore.kernel.org/r/20200908081516.8561-4-dwagner@suse.de
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Refactor qla2x00_get_sp_from_handle() to avoid the unnecessary goto if
early returns are used. With this we can also avoid preinitialzing the sp
pointer.
Link: https://lore.kernel.org/r/20200908081516.8561-3-dwagner@suse.de
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Emit a warning when ->done or ->free are called on an already freed
srb. There is a hidden use-after-free bug in the driver which corrupts
the srb memory pool which originates from the cleanup callbacks.
An extensive search didn't bring any lights on the real problem. The
initial fix was to set both pointers to NULL and try to catch invalid
accesses. But instead the memory corruption was gone and the driver
didn't crash. Since not all calling places check for NULL pointer, add
explicitly default handlers. With this we workaround the memory
corruption and add a debug help.
Link: https://lore.kernel.org/r/20200908081516.8561-2-dwagner@suse.de
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Eleven fixes, mostly in drivers or minor fixes in driver related
infrastructure libraries (target, libfc and libsas). Most of the bugs
fixed only show up under rare circumstances, the exception being the
endianness problem in qla2xxx which is used as a device on some sparc
systems.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX1egVyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishShgAP9McHKn
9T/m2mAjBr8IMZRlD4Y6nC+ToxDdRDsYT6iAOQD/ZO1FajxEcGC4xEtWznvXtqGk
H1Lfr/ta19GSEPqaZ44=
=rDo9
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eleven fixes, mostly in drivers or minor fixes in driver related
infrastructure libraries (target, libfc and libsas).
Most of the bugs fixed only show up under rare circumstances, the
exception being the endianness problem in qla2xxx which is used as a
device on some sparc systems"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Don't call disable_irq from IRQ poll handler
scsi: megaraid_sas: Don't call disable_irq from process IRQ poll
scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem
scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA
scsi: target: iscsi: Fix data digest calculation
scsi: lpfc: Update lpfc version to 12.8.0.4
scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional events
scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery
scsi: lpfc: Fix setting IRQ affinity with an empty CPU mask
scsi: qla2xxx: Fix regression on sparc64
scsi: libfc: Fix for double free()
scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort
A negative error code should be returned.
Link: https://lore.kernel.org/r/20200829075746.19166-1-tian.xianting@h3c.com
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 98aee70d19 ("qla2xxx: Add endianizer to max_payload_size
modifier.") in 2014 broke qla2xxx on sparc64, e.g. as in the Sun Blade 1000
/ 2000. Unbreak by partial revert to fix endianness in nvram firmware
default initialization. Also mark the second frame_payload_size in nvram_t
__le16 to avoid new sparse warnings.
Link: https://lore.kernel.org/r/20200827.222729.1875148247374704975.rene@exactcode.com
Fixes: 98aee70d19 ("qla2xxx: Add endianizer to max_payload_size modifier.")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: René Rebe <rene@exactcode.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On an error exit path, a negative error code should be returned instead of
a positive return value.
Link: https://lore.kernel.org/r/20200802111530.5020-1-tianjia.zhang@linux.alibaba.com
Fixes: 8777e4314d ("scsi: qla2xxx: Migrate NVME N2N handling into state machine")
Cc: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the case of a failed retry, a positive value EIO is returned here. I
think this is a typo error. It is necessary to return an error value.
[mkp: caller checks != 0 but the rest of the file uses -Exxx so fix this up
to be consistent]
Link: https://lore.kernel.org/r/20200802111528.4974-1-tianjia.zhang@linux.alibaba.com
Fixes: 0691094ff3 ("scsi: qla2xxx: Add logic to detect ABTS hang and response completion")
Cc: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The initialization value of `rc` is wrong. It is unnecessary to initialize
`rc` variables, so remove its initialization operation.
Link: https://lore.kernel.org/r/20200802111527.4928-1-tianjia.zhang@linux.alibaba.com
Fixes: 84905dfe78 ("scsi: qla2xxx: Fix TMF and Multi-Queue config")
Cc: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.
[mkp: removed memset() hunk that has already been addressed]
Link: https://lore.kernel.org/r/20200802110721.677707-1-christophe.jaillet@wanadoo.fr
Fixes: 4161cee52d ("[SCSI] qla4xxx: Add host statistics support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes coccicheck warning:
./drivers/scsi/qla2xxx/qla_mbx.c:4928:15-33: WARNING: dma_alloc_coherent use in els_cmd_map already zeroes out memory, so memset is not needed
dma_alloc_coherent() already zeroes out memory so memset() is not needed.
Link: https://lore.kernel.org/r/1596079918-41115-3-git-send-email-liheng40@huawei.com
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FCP T10-PI and NVMe features are independent of each other. This patch
allows both features to co-exist.
This reverts commit 5da05a26b8.
Link: https://lore.kernel.org/r/20200806111014.28434-12-njavali@marvell.com
Fixes: 5da05a26b8 ("scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FCoE adapter initialization failed for ISP8021 with the following patch
applied. In addition, reproduction of the issue the patch originally tried
to address has been unsuccessful.
This reverts commit 3cb182b3fa.
Link: https://lore.kernel.org/r/20200806111014.28434-11-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
OS boot during Boot from SAN was stuck at dracut emergency shell after
enabling NVMe driver parameter. For non-MQ support the driver was enabling
MQ. Add a check to confirm if FW supports MQ.
Link: https://lore.kernel.org/r/20200806111014.28434-9-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qla_nvme_register_hba() puts out a warning when there are not enough queue
pairs available for FC-NVME. Just fail the NVME registration rather than a
WARNING + call Trace.
Link: https://lore.kernel.org/r/20200806111014.28434-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ql2xextended_error_logging can now be set to 1 to get the default mask
value, as opposed to at module load time only.
Link: https://lore.kernel.org/r/20200806111014.28434-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Multipath errors were seen during failback due to login timeout. The
remote device sent LOGO, the local host tore down the session and did
relogin. The RSCN arrived indicates remote device is going through failover
after which the relogin is in a 20s timeout phase. At this point the
driver is stuck in the relogin process. Add a fix to delete the session as
part of abort/flush the login.
Link: https://lore.kernel.org/r/20200806111014.28434-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On Zone Disable, certain switches would ignore all commands. This causes
timeout for both switch scan command and abort of that command. On
detection of this condition, all sessions will be shutdown.
Link: https://lore.kernel.org/r/20200806111014.28434-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a
huge docbook fix update like most other subsystems and no major update
to the core (the few non trivial updates are either minor fixes or
removing an unused feature [scsi_sdb_cache]).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXyxq1yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSoAAQChZ4i8
ZqYW3pL33JO3fA8vdjvLuyC489Hj4wzIsl3/bQEAxYyM6BSLvMoLWR2Plq/JmTLm
4W/LDptarpTiDI3NuDc=
=4b0W
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc,
hpsa, zfcp, scsi_debug) and minor bug fixes.
We also have a huge docbook fix update like most other subsystems and
no major update to the core (the few non trivial updates are either
minor fixes or removing an unused feature [scsi_sdb_cache])"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits)
scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences
scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices
scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged
scsi: scsi_debug: Implement tur_ms_to_ready parameter
scsi: scsi_debug: Fix request sense
scsi: lpfc: Fix typo in comment for ULP
scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC
scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
scsi: hpsa: Correct ctrl queue depth
scsi: target: tcmu: Make TMR notification optional
scsi: target: tcmu: Implement tmr_notify callback
scsi: target: tcmu: Fix and simplify timeout handling
scsi: target: tcmu: Factor out new helper ring_insert_padding
scsi: target: tcmu: Do not queue aborted commands
scsi: target: tcmu: Use priv pointer in se_cmd
scsi: target: Add tmr_notify backend function
scsi: target: Modify core_tmr_abort_task()
scsi: target: iscsi: Fix inconsistent debug message
scsi: target: iscsi: Fix login error when receiving
...
* Firmware Initialization with SCM enabled based on NVRAM setting and
firmware support (About Firmware).
* Enable PUREX and add support for fabric performance impact
notification (FPIN) handling.
* Allocate a default PUREX item for each vha to handle memory allocation
failures in ISR.
Link: https://lore.kernel.org/r/20200630102229.29660-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SAN Congestion Management generates ELS pkts whose size can vary and be >
64 bytes. Change the PUREX handling code to support non-standard ELS pkt
size.
Link: https://lore.kernel.org/r/20200630102229.29660-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of repeating the code for generating a debug message prefix six
times, introduce a function for computing the debug message prefix.
Link: https://lore.kernel.org/r/20200629225454.22863-10-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of using complicated control flow to only have one return statement
at the end of qla2x00_restart_isp(), return an error status as soon as it
is known that this function will fail.
Link: https://lore.kernel.org/r/20200629225454.22863-9-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
'cnt' can exceed the size of the risc_ram[] array. Prevent that Coverity
complains by rewriting an address calculation expression. This patch fixes
the following Coverity complaint:
CID 337803 (#1 of 1): Out-of-bounds read (OVERRUN)
109. overrun-local: Overrunning array of 122880 bytes at byte offset 122880
by dereferencing pointer &fw->risc_ram[cnt].
Link: https://lore.kernel.org/r/20200629225454.22863-8-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
