The fwnode_iomap() function doesn't return error pointers, it returns
NULL. It's the same as of_iomap() in that way. Update the check
accordingly.
Fixes: ecc5bf868673 ("pinctrl: nuvoton: Add ma35d1 pinctrl and GPIO driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/840152f9-d3bb-410e-8164-4c5043e1983e@moroto.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/bcm/pinctrl-bcm4908.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08_i2c.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08_spi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/meson/pinctrl-meson.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes many meson drivers which, although they did not produce
a warning with the x86 allmodconfig configuration, may cause this
warning with ARM or ARM64 configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for Amlogic Pinctrl drivers
Link: https://lore.kernel.org/r/20240610-md-drivers-pinctrl-v1-1-68462e3d960c@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
While muxing groups of pins at once can be convenient for large
interfaces, it can also be rigid. This is because the group is set to
all pins which support a particular function, even though not all pins
may be used. For example, the sdhci0 function may be used with a 8-bit
eMMC, 4-bit SD card, or even a 1-bit SD card. In these cases, the extra
pins may be repurposed for other uses, but this is not currently
allowed.
There is not too much point in pin "groups" when there are not actual
pin groups at the hardware level. The pins can all be muxed
individually, so there's no point in adding artificial groups on top.
Just mux the pins like the hardware allows.
To this effect, add a new group for each pin which can be muxed. These
groups are part of each function the pin can be muxed to. We treat group
selectors beyond the number of groups as "pin" groups. To set this up,
we initialize groups before functions, and then create a bitmap of used
pins for each function. These used pins are appended to the function's
list of groups.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240610223550.2449230-3-sean.anderson@linux.dev
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
rockchip_pmx_set reset all pinmuxs in group to 0 in the case of error,
add missing bank data retrieval in that code to avoid setting mux on
unexpected pins.
Fixes: 14797189b3 ("pinctrl: rockchip: add return value to rockchip_set_mux")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Link: https://lore.kernel.org/r/20240606125755.53778-5-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
rk3328_pin_ctrl uses type of RK3288 which has a hack in
rockchip_pinctrl_suspend and rockchip_pinctrl_resume to restore GPIO6-C6
at assume, the hack is not applicable to RK3328 as GPIO6 is not even
exist in it. So use a dedicated pinctrl type to skip this hack.
Fixes: 3818e4a767 ("pinctrl: rockchip: Add rk3328 pinctrl support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Link: https://lore.kernel.org/r/20240606125755.53778-4-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinmux bits for GPIO3-B1 to GPIO3-B6 pins are not explicitly
specified in RK3328 TRM, however we can get hint from pad name and its
correspinding IOMUX setting for pins in interface descriptions. The
correspinding IOMIX settings for these pins can be found in the same
row next to occurrences of following pad names in RK3328 TRM.
GPIO3-B1: IO_TSPd5m0_CIFdata5m0_GPIO3B1vccio6
GPIO3-B2: IO_TSPd6m0_CIFdata6m0_GPIO3B2vccio6
GPIO3-B3: IO_TSPd7m0_CIFdata7m0_GPIO3B3vccio6
GPIO3-B4: IO_CARDclkm0_GPIO3B4vccio6
GPIO3-B5: IO_CARDrstm0_GPIO3B5vccio6
GPIO3-B6: IO_CARDdetm0_GPIO3B6vccio6
Add pinmux data to rk3328_mux_recalced_data as mux register offset for
these pins does not follow rockchip convention.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a767 ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-3-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinmux bits for GPIO2-B0 to GPIO2-B6 actually have 2 bits width,
correct the bank flag for GPIO2-B. The pinmux bits for GPIO2-B7 is
recalculated so it remain unchanged.
The pinmux bits for those pins are not explicitly specified in RK3328
TRM, however we can get hint from pad name and its correspinding IOMUX
setting for pins in interface descriptions. The correspinding IOMIX
settings for GPIO2-B0 to GPIO2-B6 can be found in the same row next to
occurrences of following pad names in RK3328 TRM.
GPIO2-B0: IO_SPIclkm0_GPIO2B0vccio5
GPIO2-B1: IO_SPItxdm0_GPIO2B1vccio5
GPIO2-B2: IO_SPIrxdm0_GPIO2B2vccio5
GPIO2-B3: IO_SPIcsn0m0_GPIO2B3vccio5
GPIO2-B4: IO_SPIcsn1m0_FLASHvol_sel_GPIO2B4vccio5
GPIO2-B5: IO_ I2C2sda_TSADCshut_GPIO2B5vccio5
GPIO2-B6: IO_ I2C2scl_GPIO2B6vccio5
This fix has been tested on NanoPi R2S for fixing confliting pinmux bits
between GPIO2-B7 with GPIO2-B5.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a767 ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-2-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This driver calls pinctrl_register_and_init() which is not
devm_ managed, it will leads memory leak if pinctrl_enable()
fails. Replace it with devm_pinctrl_register_and_init().
And add missing of_node_put() in the error path.
Fixes: 5038a66dad ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-4-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This driver calls pinctrl_register_and_init() which is not
devm_ managed, it will leads memory leak if pinctrl_enable()
fails. Replace it with devm_pinctrl_register_and_init().
And call pcs_free_resources() if pinctrl_enable() fails.
Fixes: 5038a66dad ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-3-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In devm_pinctrl_register(), if pinctrl_enable() fails in pinctrl_register(),
the "pctldev" has not been added to dev resources, so devm_pinctrl_dev_release()
can not be called, it leads memory leak.
Introduce pinctrl_uninit_controller(), call it in the error path to free memory.
Fixes: 5038a66dad ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-2-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In create_pinctrl(), pinctrl_maps_mutex is acquired before calling
add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl()
calls pinctrl_free(). However, pinctrl_free() attempts to acquire
pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to
a potential deadlock.
This patch resolves the issue by releasing pinctrl_maps_mutex before
calling pinctrl_free(), preventing the deadlock.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: 42fed7ba44 ("pinctrl: move subsystem mutex to pinctrl_dev struct")
Suggested-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240604085838.3344-1-hagarhem@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use modern string_choices API instead of manually determining the
output using ternary operator.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240603181938.76047-3-wahrenst@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The commit 8ff05989b4 ("pinctrl: bcm2835: Make pin freeing behavior
configurable") unintentionally made the module parameter
persist_gpio_outputs changeable at runtime. So drop the write permission
in order to make the freeing behavior predictable for user applications.
Fixes: 8ff05989b4 ("pinctrl: bcm2835: Make pin freeing behavior configurable")
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Closes: https://lore.kernel.org/linux-gpio/Zjk-C0nLmlynqLAE@surfacebook.localdomain/
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240603181938.76047-2-wahrenst@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add missing support for LP8764 PMIC in the probe().
Issue detected with v6.10-rc1 (and reproduced with 6.10-rc2) using a TI
J7200 EVM board.
tps6594-pinctrl tps6594-pinctrl.8.auto: error -EINVAL:
Couldn't register gpio_regmap driver
tps6594-pinctrl tps6594-pinctrl.8.auto: probe with driver tps6594-pinctrl
failed with error -22
Fixes: 2088297159 (pinctrl: pinctrl-tps6594: Add TPS65224 PMIC pinctrl and GPIO)
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240603082110.2104977-1-thomas.richard@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add support for the new RZ/V2H(P) (R9A09G057) Soc,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZmwB0AAKCRCKwlD9ZEnx
cKIJAQDoO2BVZmaYJvJoiV8mHUdcRqj94pL5GF2tvNb/cKqdwQEA8ceFXJC2zp0L
6yjNrDI29WVHsdcQLTy5dAWYeRgJPAQ=
=O4N5
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.11
- Add support for the new RZ/V2H(P) (R9A09G057) Soc,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A recent refactoring to use the func member in struct function_desc
missed converting one uses of name in keembay_build_functions(),
resulting in a build failure:
drivers/pinctrl/pinctrl-keembay.c: In function 'keembay_build_functions':
drivers/pinctrl/pinctrl-keembay.c:1630:35: error: 'struct function_desc' has no member named 'name'
1630 | if (!fdesc->name) {
| ^~
Perform the same conversion to resolve the build error.
Fixes: 73ee52205e5a ("pinctrl: keembay: Convert to use func member")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240611-pinctrl-keembay-fix-func-conversion-v1-1-3197f2ded3f7@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406131133.WwdetfBL-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The generic pinctrl-scmi.c driver could not be used for i.MX95 because
i.MX95 SCMI firmware not supports functions, groups or generic
'Pin Configuration Type and Enumerations' listed in SCMI Specification.
i.MX95 System Control Management Interface(SCMI) firmware only supports
below pin configuration types which are OEM specific types:
192: PIN MUX
193: PIN CONF
194: DAISY ID
195: DAISY VAL
To Support fsl,pins property together with SCMI OEM protocol, add this
driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20240521-pinctrl-scmi-imx95-v1-3-9a1175d735fd@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
i.MX95 will have its own pinctrl scmi driver, so need block
pinctrl-scmi driver for i.MX95, otherwise there will be two pinctrl
devices for a single scmi protocol@19.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20240521-pinctrl-scmi-imx95-v1-2-9a1175d735fd@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The PDC was hooked up as a wakeup parent in the DTS in
commit 71f080633d ("arm64: dts: qcom: sdm670: Hook up PDC as
wakeup-parent of TLMM"), but the wakeirq mapping was not defined so it
had no effect. Add the mapping for wakeup interrupts on the PDC to their
corresponding pins.
Configuring a pin IRQ as dual-edge would break it unless the
wakeirq_dual_edge_errata flag is set.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20240523230619.256882-2-mailingradian@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Instead of implementing a custom register paging mechanism in
the driver use the existing regmap ranges feature.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240521152602.1097764-2-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently there are 3 locks being used when accessing the chip, one
in the driver and one in each regmap. Reduce that to one driver only
lock that protects all regmap and regcache accesses.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240521152602.1097764-1-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All drivers are converted to use embedded struct pinfunction.
Remove unused members from struct function_desc.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240530085745.1539925-12-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use func member embedded in struct function_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin function description.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240530085745.1539925-11-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use func member embedded in struct function_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin function description.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240530085745.1539925-10-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use func member embedded in struct function_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin function description.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240530085745.1539925-9-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use func member embedded in struct function_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin function description.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240530085745.1539925-8-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct function_desc is a particular version of the struct pinfunction
with associated opaque data. Start switching pin control core and
drivers to use it explicitly.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240530085745.1539925-7-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add PINCTRL_FUNCTION_DESC() macro for inline use.
While at it, fix adjective form in the comment of PINCTRL_GROUP_DESC().
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240530085745.1539925-6-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Provide a helper macro to assign the struct function_desc entries.
This helps further refactoring.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240530085745.1539925-5-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use pin numbers stored in the pin descriptors instead of index value while
creating the pin groups. Pin Id's are not same as Index values for Xilinx
Versal platform, so use the pin values from descriptor which works for both
ZynqMP and Versal platforms.
Signed-off-by: Swati Agarwal <swati.agarwal@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2413a1f99278d70313960f13daecda9ef54172d8.1716807432.git.michal.simek@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current version of the pinctrl driver has some issues:
1. Duplicated "gpio" pmx function
The common code will add a "gpio" pmx functon to every pin group, so
it's not necessary to define a separate "gpio" pmx function in pin
groups.
2. Duplicated pmx function name
There are some same function name in different pin groups, which will
cause some problems. For example, when we want to use PAD_GPIO0 as
refclk output function, the common clk framework code will search the
entire pin function lists, then return the first one matched, in this
case the matched function list only include the PAD_CO_CLKO pin group
because there are three "refclk" pin function, which is added by
refclk_grp, spi_cs1_grp and gpio_grp.
To solve this problem, a simple way is just add a pingrp refix to
function name like mt7620 pinctrl driver does.
3. Useless "-" or "rsvd" functon
It's really unnecessary to add a reserved pin mux function to the
function lists, because we never use it.
Signed-off-by: Weihao Li <cn.liweihao@gmail.com>
Link: https://lore.kernel.org/r/20240527022036.31985-1-user@blabla
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
PMC8380 is a new chip, featuring 10 GPIOs. Describe it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240525-topic-pmc8380_gpio-v2-2-2de50cb28ac1@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We were not resetting the pointer to the associated gpio_device once
we are done displaying a pin's information.
This meant that once we reached the end of a gpio-range, if there
were pins right after it that did not belong to any known range,
they would be associated with the previous range's gpio device.
This resulted in those pins appearing as <4294966783:old_gdev> instead
of the expected <0:?> (due to gpio_num being -1).
Signed-off-by: Léo DUBOIN <lduboin@freebox.fr>
Link: https://lore.kernel.org/r/c40d0634abefa19e689ffd450e0f48a8d63c4fc4.1714049455.git.lduboin@freebox.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We previously only looked at the 'pin_base' of the pinctrl_gpio_ranges
struct for determining if a pin matched a GPIO number.
This value is present only if the 'pins' array is not NULL,
and is 0 otherwise. This means that GPIO ranges declared using
gpiochip_add_pingroup_range(), thus making use of pins, were always matched
by the pins in the range [0-npins] even if they contained pins in a
completely separate range.
Signed-off-by: Léo DUBOIN <lduboin@freebox.fr>
Link: https://lore.kernel.org/r/6df39bd47942156be5713f8f4e317d2ad3e0ddeb.1714049455.git.lduboin@freebox.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SPMI GPIO driver assumes that the parent device is an SPMI device
and accesses random data when backcasting the parent struct device
pointer for non-SPMI devices.
Fortunately this does not seem to cause any issues currently when the
parent device is an I2C client like the PM8008, but this could change if
the structures are reorganised (e.g. using structure randomisation).
Notably the interrupt implementation is also broken for non-SPMI devices.
Also note that the two GPIO pins on PM8008 are used for interrupts and
reset so their practical use should be limited.
Drop the broken GPIO support for PM8008 for now.
Fixes: ea119e5a48 ("pinctrl: qcom-pmic-gpio: Add support for pm8008")
Cc: stable@vger.kernel.org # 5.13
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240529162958.18081-9-johan+linaro@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In preparation for passing custom params for RZ/V2H(P) SoC assign the
custom params that are being passed via struct rzg2l_pinctrl_data.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240530173857.164073-14-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support to configure bias-disable, bias-pull-up, and bias-pull-down
properties of the pin.
Two new function pointers, hw_to_bias_param() and bias_param_to_hw(),
are introduced in the struct rzg2l_pinctrl_data to configure bias
settings, as the values in the PUPD register differ when compared to the
RZ/G2L family and the RZ/V2H(P) SoC.
Value | RZ/G2L | RZ/V2H
---------------------------------
00b: | Bias Disabled | Pull up/down disabled
01b: | Pull-up | Pull up/down disabled
10b: | Pull-down | Pull-down
11b: | Prohibited | Pull-up
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240530173857.164073-12-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Introduce function pointers oen_read() and oen_write(), in the struct
rzg2l_pinctrl_data to facilitate reading and writing to the PFC_OEN
register. On the RZ/V2H(P) SoC, unlocking the PWPR.REGWE_B bit before
writing to the PFC_OEN register is necessary, and the PFC_OEN register
has more bits compared to the RZ/G2L family. To handle these
differences between RZ/G2L and RZ/V2H(P) and to reuse the existing code
for RZ/V2H(P), these function pointers are introduced.
Additionally, populate these function pointers with appropriate data for
existing SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://lore.kernel.org/r/20240530173857.164073-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Introduces pmc_writeb() function pointer, in the struct
rzg2l_pinctrl_data to facilitate writing to the PMC register. On the
RZ/V2H(P) SoC, unlocking the PWPR.REGWE_A bit before writing to PMC
registers is required, whereas this is not the case for the existing
RZ/G2L family. This addition enables the reuse of existing code for
RZ/V2H(P). Additionally, populate this function pointer with
appropriate data for existing SoCs.
Note that this functionality is only handled in rzg2l_gpio_request(), as
PMC unlock/lock during PFC setup will be taken care of in the
pwpr_pfc_lock_unlock() function pointer.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://lore.kernel.org/r/20240530173857.164073-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On the RZ/G2L SoC, the PFCWE bit controls writing to PFC registers.
However, on the RZ/V2H(P) SoC, the PFCWE (REGWE_A on RZ/V2H) bit controls
writing to both PFC and PMC registers. Additionally, BIT(7) B0WI is
undocumented for the PWPR register on RZ/V2H(P) SoC. To accommodate these
differences across SoC variants, introduce the pwpr_pfc_lock_unlock()
function pointer.
Note, in rzg2l_pinctrl_set_pfc_mode() the pwpr_pfc_lock_unlock(.., false)
is now called before PMC read/write and pwpr_pfc_lock_unlock(.., true) is
now called after PMC read/write this is to keep changes minimal for
RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://lore.kernel.org/r/20240530173857.164073-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On RZ/V2H(P) SoC, the power registers for SD and ETH do not exist,
resulting in invalid register offsets. Ensure that the register offsets
are valid before any read/write operations are performed. If the power
registers are not available, both SD and ETH will be set to '0'.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://lore.kernel.org/r/20240530173857.164073-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable parsing of variable configuration for all architectures. This
prepares for adding support for the RZ/V2H SoC, which utilizes the ARM64
architecture and features port pins with variable configuration.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://lore.kernel.org/r/20240530173857.164073-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Drop the rzg2l_variable_pin_cfg struct and instead use the
RZG2L_VARIABLE_PIN_CFG_PACK() macro for the variable pin configuration.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://lore.kernel.org/r/20240530173857.164073-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The pin configuration bits have been growing for every new SoCs being
added for the pinctrl-rzg2l driver which would mean updating the macros
every time for each new configuration. To avoid this allocate additional
bits for pin configuration by relocating the known fixed bits to the very
end of the configuration.
Also update the size of 'cfg' to 'u64' to allow more configuration bits
in the 'struct rzg2l_variable_pin_cfg'.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://lore.kernel.org/r/20240530173857.164073-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On PREEMPT_RT kernels the spinlock_t maps to an rtmutex. Using
raw_spin_lock_irqsave()/raw_spin_unlock_irqrestore() on
&pctrl->lock.rlock breaks the PREEMPT_RT builds. To fix this use
spin_lock_irqsave()/spin_unlock_irqrestore() on &pctrl->lock.
Fixes: 02cd2d3be1 ("pinctrl: renesas: rzg2l: Configure the interrupt type on resume")
Reported-by: Diederik de Haas <didi.debian@cknow.org>
Closes: https://lore.kernel.org/all/131999629.KQPSlr0Zke@bagend
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240522055421.2842689-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
- Add support for X-Powers AXP717 PMIC to AXP22X
- Add support for Rockchip RK816 PMIC to RK8XX
- Add support for TI TPS65224 PMIC to TPS6594
- New Functionality
- Add Power Off functionality to Rohm BD71828
- Allow I2C SMBus access in Renesas RSMU
- Fix-ups
- Device Tree binding adaptions/conversions/creation
- Shift Intel support over to MSI interrupts
- Generify adding platform data away from being ACPI specific
- Use device core supplied attribute to register sysfs entries
- Replace hand-rolled functionality with generic APIs
- Utilise centrally provided helpers and macros
- Clean-up error handling
- Remove superfluous/duplicated/unused sections
- Trivial; spelling, whitespace, coding-style adaptions
- More Maple Tree conversions
-----BEGIN PGP SIGNATURE-----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=QAjw
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for X-Powers AXP717 PMIC to AXP22X
- Add support for Rockchip RK816 PMIC to RK8XX
- Add support for TI TPS65224 PMIC to TPS6594
New Functionality:
- Add Power Off functionality to Rohm BD71828
- Allow I2C SMBus access in Renesas RSMU
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Shift Intel support over to MSI interrupts
- Generify adding platform data away from being ACPI specific
- Use device core supplied attribute to register sysfs entries
- Replace hand-rolled functionality with generic APIs
- Utilise centrally provided helpers and macros
- Clean-up error handling
- Remove superfluous/duplicated/unused sections
- Trivial; spelling, whitespace, coding-style adaptions
- More Maple Tree conversions"
* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
dt-bindings: mfd: Use full path to other schemas
mfd: rsmu: support I2C SMBus access
dt-bindings: mfd: Convert lp873x.txt to json-schema
dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
mfd: kempld: Remove custom DMI matching code
mfd: cs42l43: Update patching revision check
dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
mfd: timberdale: Remove redundant assignment to variable err
dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
mfd: axp20x: Convert to use Maple Tree register cache
mfd: bd71828: Remove commented code lines
mfd: intel-m10-bmc: Change staging size to a variable
dt-bindings: mfd: Add ROHM BD71879
mfd: Tidy Kconfig dependency's parentheses
mfd: ocelot-spi: Use spi_sync_transfer()
dt-bindings: mfd: syscon: Add missing simple syscon compatibles
...
Core changes:
- Use DEFINE_SHOW_STORE_ATTRIBUTE() in debugfs entries.
New drivers:
- Qualcomm PMIH0108, PMD8028, PMXR2230 and PM6450
pin control support.
Improvements:
- Serious cleanup of the recently merged aw9523 driver.
- Fix PIN_CONFIG_BIAS_DISABLE handling in pinctrl-single.
- A slew of device tree binding cleanups.
- Support a bus clock in the Samsung driver.
-----BEGIN PGP SIGNATURE-----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=9Ty5
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Use DEFINE_SHOW_STORE_ATTRIBUTE() in debugfs entries
New drivers:
- Qualcomm PMIH0108, PMD8028, PMXR2230 and PM6450 pin control support
Improvements:
- Serious cleanup of the recently merged aw9523 driver
- Fix PIN_CONFIG_BIAS_DISABLE handling in pinctrl-single
- A slew of device tree binding cleanups
- Support a bus clock in the Samsung driver"
* tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
pinctrl: bcm2835: Make pin freeing behavior configurable
dt-bindings: pinctrl: qcom,pmic-gpio: Fix "comptaible" typo for PMIH0108
pinctrl: qcom: pinctrl-sm7150: Fix sdc1 and ufs special pins regs
dt-bindings: pinctrl: mediatek: mt7622: add "antsel" function
dt-bindings: pinctrl: mediatek: mt7622: fix array properties
pinctrl: samsung: drop redundant drvdata assignment
pinctrl: samsung: support a bus clock
dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
pinctrl: renesas: rzg2l: Limit 2.5V power supply to Ethernet interfaces
pinctrl: renesas: r8a779h0: Add INTC-EX pins, groups, and function
pinctrl: renesas: r8a779h0: Fix IRQ suffixes
pinctrl: renesas: rzg2l: Remove extra space in function parameter
dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901
pinctrl: pinconf-generic: print hex value
pinctrl: realtek: fix module autoloading
pinctrl: qcom: sm7150: fix module autoloading
pinctrl: loongson2: fix module autoloading
pinctrl: mediatek: fix module autoloading
pinctrl: freescale: imx8ulp: fix module autoloading
dt-bindings: pinctrl: qcom,pmic-gpio: Allow gpio-hog nodes
...
GPIO core:
- remove more unused legacy interfaces (after converting the last remaining
users to better alternatives)
- update kerneldocs
- improve error handling and log messages in GPIO ACPI code
- remove dead code (always true checks) from GPIOLIB
New drivers:
- add a driver for Intel Granite Rapids-D vGPIO
Driver improvements:
- use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
- provide an ID table for gpio-cros-ec to avoid a driver name fallback check
- add support for gpio-ranges for GPIO drivers supporting multiple GPIO banks
- switch to using dynamic GPIO base in gpio-brcmstb
- fix irq handling in gpio-npcm-sgpio
- switch to memory mapped IO accessors in gpio-sch
DT bindings:
- add support for gpio-ranges to gpio-brcmstb
- add support for a new model and the gpio-line-names property to gpio-mpfs
Documentation:
- replace leading tabs with spaces in code blocks
- fix typos
-----BEGIN PGP SIGNATURE-----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=mBWd
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski
"This was a quiet release cycle for the GPIO tree and so this
pull-request is relatively small.
We have one new driver, some minor improvements to the GPIO core code
and across several drivers, some DT and documentation updates but in
general nothing stands out or is controversial. All changes have spent
time in next with no reported issues (or ones that were quickly
fixed).
GPIO core:
- remove more unused legacy interfaces (after converting the last
remaining users to better alternatives)
- update kerneldocs
- improve error handling and log messages in GPIO ACPI code
- remove dead code (always true checks) from GPIOLIB
New drivers:
- add a driver for Intel Granite Rapids-D vGPIO
Driver improvements:
- use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
- provide an ID table for gpio-cros-ec to avoid a driver name
fallback check
- add support for gpio-ranges for GPIO drivers supporting multiple
GPIO banks
- switch to using dynamic GPIO base in gpio-brcmstb
- fix irq handling in gpio-npcm-sgpio
- switch to memory mapped IO accessors in gpio-sch
DT bindings:
- add support for gpio-ranges to gpio-brcmstb
- add support for a new model and the gpio-line-names property to
gpio-mpfs
Documentation:
- replace leading tabs with spaces in code blocks
- fix typos"
* tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits)
gpio: nuvoton: Fix sgpio irq handle error
gpiolib: Discourage to use formatting strings in line names
gpio: brcmstb: add support for gpio-ranges
gpio: of: support gpio-ranges for multiple gpiochip devices
dt-bindings: gpio: brcmstb: add gpio-ranges
gpio: Add Intel Granite Rapids-D vGPIO driver
gpio: brcmstb: Use dynamic GPIO base numbers
gpiolib: acpi: Set label for IRQ only lines
gpiolib: acpi: Add fwnode name to the GPIO interrupt label
gpiolib: Get rid of never false gpio_is_valid() calls
gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
gpiolib: acpi: Simplify error handling in __acpi_find_gpio()
gpiolib: acpi: Extract __acpi_find_gpio() helper
gpio: sch: Utilise temporary variable for struct device
gpio: sch: Switch to memory mapped IO accessors
gpio: regmap: Use -ENOTSUPP consistently
gpio: pcie-idio-24: Use -ENOTSUPP consistently
Documentation: gpio: Replace leading TABs by spaces in code blocks
gpiolib: acpi: Check for errors first in acpi_find_gpio()
...
As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them. Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is
used to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts
and indirect messaging, SCMI firmware support for pin control
and vendor specific interfaces, and TEE firmware interface
changes across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan
k230 support
- Multiple minor updates for the TI sysc bus driver, memory controllers,
hisilicon hccs and more
-----BEGIN PGP SIGNATURE-----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=4rf0
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZjUIHwAKCRB4tDGHoIJi
0r8RAQD+B5rJde/sQuQlmkJGrmZfyE/6/I1ZFxv0/xHhRPNWRAD/RFTTDthL/7c4
frMGl/nWSD3fvGmXrQ7Dp6wc1APIdQI=
=BWHh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QGOJ
-----END PGP SIGNATURE-----
Merge tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC Kconfig Updates for v6.10
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: config: enable ARCH_CANAAN in defconfig
RISC-V: drop SOC_VIRT for ARCH_VIRT
RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE
RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP
RISC-V: Drop unused SOC_CANAAN
reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
Link: https://lore.kernel.org/r/20240503-mardi-underling-3d81a9f97329@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* New driver for vGPIO controller on Intel Granite Rapids-D
* Update ACPI GPIO library to unify the IRQ code path
* Better GPIO IRQ line labeling for ACPI
* Switched Intel SCH driver to use "mapped" I/O accessors
The following is an automated git shortlog grouped by driver:
Add Intel Granite Rapids-D vGPIO driver:
- Add Intel Granite Rapids-D vGPIO driver
crystalcove:
- Use -ENOTSUPP consistently
gpiolib:
- acpi: Set label for IRQ only lines
- acpi: Add fwnode name to the GPIO interrupt label
- acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
- acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
- acpi: Simplify error handling in __acpi_find_gpio()
- acpi: Extract __acpi_find_gpio() helper
- acpi: Check for errors first in acpi_find_gpio()
- acpi: Remove never true check in acpi_get_gpiod_by_index()
sch:
- Utilise temporary variable for struct device
- Switch to memory mapped IO accessors
wcove:
- Use -ENOTSUPP consistently
-----BEGIN PGP SIGNATURE-----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=33sC
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.10-1
* New driver for vGPIO controller on Intel Granite Rapids-D
* Update ACPI GPIO library to unify the IRQ code path
* Better GPIO IRQ line labeling for ACPI
* Switched Intel SCH driver to use "mapped" I/O accessors
The following is an automated git shortlog grouped by driver:
Add Intel Granite Rapids-D vGPIO driver:
- Add Intel Granite Rapids-D vGPIO driver
crystalcove:
- Use -ENOTSUPP consistently
gpiolib:
- acpi: Set label for IRQ only lines
- acpi: Add fwnode name to the GPIO interrupt label
- acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
- acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
- acpi: Simplify error handling in __acpi_find_gpio()
- acpi: Extract __acpi_find_gpio() helper
- acpi: Check for errors first in acpi_find_gpio()
- acpi: Remove never true check in acpi_get_gpiod_by_index()
sch:
- Utilise temporary variable for struct device
- Switch to memory mapped IO accessors
wcove:
- Use -ENOTSUPP consistently
1. Add support for toggling bus clock (PCLK) for any pin controller
register accesses. This looks needed on newer Samsung chips, like
Google GS101 and probably Exynos850.
2. Drop old, deprecated in v6.1 bindings header with register constants.
The constants were moved to DTS headers.
-----BEGIN PGP SIGNATURE-----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=wjQ1
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.10
1. Add support for toggling bus clock (PCLK) for any pin controller
register accesses. This looks needed on newer Samsung chips, like
Google GS101 and probably Exynos850.
2. Drop old, deprecated in v6.1 bindings header with register constants.
The constants were moved to DTS headers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Until now after a bcm2835 pin was freed its pinmux was set to GPIO_IN.
So in case it was configured as GPIO_OUT before the configured output
level also get lost. As long as GPIO sysfs was used this wasn't
actually a problem because the pins and their possible output level
were kept by sysfs.
Since more and more Raspberry Pi users start using libgpiod they are
confused about this behavior. So make the pin freeing behavior of
GPIO_OUT configurable via module parameter. In case
pinctrl-bcm2835.persist_gpio_outputs is set to 1, the output level is
kept.
This patch based on the downstream work of Phil Elwell.
Link: https://github.com/raspberrypi/linux/pull/6117
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Message-ID: <20240503062745.11298-1-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for TPS65224 pinctrl and GPIOs to TPS6594 driver as they have
significant functional overlap.
TPS65224 PMIC has 6 GPIOS which can be configured as GPIO or other
dedicated device functions.
Signed-off-by: Nirmala Devi Mal Nadar <m.nirmaladevi@ltts.com>
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/0109018f2fdce15d-c13bd809-a11b-4202-9b7f-c9380d51b070-000000@ap-south-1.amazonses.com
Signed-off-by: Lee Jones <lee@kernel.org>
This adds support for RK816 to the exising rk805 pinctrl driver
It has a single pin which can be configured as input from a thermistor (for
instance in an attached battery) or as a gpio.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240416161237.2500037-4-knaerzche@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
- Fix a double-free in the pinctrl_enable() errorpath.
- Fix a refcount leak in pinctrl_dt_to_map().
- Fix selecting the GPIO pin control state and the UART3
pin config group in the Intel Baytrail driver.
- Fix readback of schmitt trigger status in the Mediatek
Paris driver, along with some semantic pin config issues
in this driver.
- Fix a pin suffix typo in the Meson A1 driver.
- Fix an erroneous register offset in he Aspeed G6 driver.
- Fix an inconsistent lock state and the interrupt type on
resume in the Renesas RZG2L driver.
- Fix some minor confusion in the Renesas DT bindings.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmYwnFsACgkQQRCzN7AZ
XXNOgw/9HiN5N8Z869DT92OOQn8cFAshkxB/oN9ltd/Mzc73RquNB6pSAB1k43t1
6TnhHhMQOswflGOTR9aSdo96iHwx596D1nyCy56uSX9dGa2I9smwIpBoeT1rNTmM
HEt0CbHAWJ93F2BTBXNy6/fgLM/fZtD4SiCSiUynluUA9s/mSx7JmA6Lly6WSQBF
cRLj4DbVEKOUaHLcB90G0NI8VtJzjaRIdTkSqawd0SVVz+8vBmdLNWib6XvUsEP7
rQMs5omy+NSOWK0gKOUzXVZaXq8glbah3lZtFBZkZPjr13ymRjAipyhS0K3G6xhS
9jCSYfkwnpO3xb/D9/ZYhDd2FC3bQmphxMIzb/LYWoNDp6mdyQxbGtnO5lco9fI1
TcOfMpP24M6Eong9xiFUiIY/yghX10yBsbWzwX6qEO8O85DHmH0JWu8akHhKKPwJ
7W1uWxAtC0URWSG3qEDpcUzB8shWK7T5jNjgvsDn/cUyQ7WXk1XjOa17U1Ka019R
v+XvJ0Z0RHn2eqKme9OfX6W5zC0fD4P5nQpE6KW051U0/wSyQVGPTzcIJGa23JeF
ZvS/2te2dsmCZtlg0lmwdzi10p3QmFZ4t1xbxVgXt2VMvD6zWRwtyP76O4Nwbwg2
OaLQVVbinDZQ90e1FaYSWNNN8jTuUo781kEZiq6gEaJfnlblV5A=
=BG4d
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix a double-free in the pinctrl_enable() errorpath
- Fix a refcount leak in pinctrl_dt_to_map()
- Fix selecting the GPIO pin control state and the UART3 pin config
group in the Intel Baytrail driver
- Fix readback of schmitt trigger status in the Mediatek Paris driver,
along with some semantic pin config issues in this driver
- Fix a pin suffix typo in the Meson A1 driver
- Fix an erroneous register offset in he Aspeed G6 driver
- Fix an inconsistent lock state and the interrupt type on resume in
the Renesas RZG2L driver
- Fix some minor confusion in the Renesas DT bindings
* tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzg2l: Configure the interrupt type on resume
pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()
pinctrl: baytrail: Add pinconf group for uart3
pinctrl: baytrail: Fix selecting gpio pinctrl state
pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE
pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback
pinctrl: core: delete incorrect free in pinctrl_enable()
pinctrl/meson: fix typo in PDM's pin name
pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration
dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
1. Basic support for SCMI v3.2 pincontrol protocol
SCMI v3.2 introduces pincontrol protocol which is intended for
controlling pins and their configuration. The pin control protocol
provides commands to:
- List the pins, groups of pins, available functions, and their
association with each other.
- Set the parameter configuration and multiplexing of the pins or
groups of pins
- Optionally request exclusive access to a pin or group of pins.
- Optionally configure the permissions of an agent to access a pin
or group of pins.
These changes adds basic support for the same in the SCMI core layer
and an implementation of the generic scmi-pinctrl driver with associated
DT bindings.
2. Framework support for multiple vendors custom protocols
With the fixed space for vendor protocols, the possibility of having
multiple vendors implementing distinct SCMI vendor protocols with
the same overlapping protocol number is very high and with the need
to support them all in a single kernel image or a module is also high.
In order to implement the same we assume:
- vendor protocols has to be tagged at build time with a vendor_id
- vendor protocols could also optionally be tagged at build time with
sub_vendor_id and implementation version
At the initialisation all the built vendor protocols are registered
with the SCMI core using a key derived from the above tags
3. Logging and tracing improvements
This includes using dev_err_probe() to bail out from probe, adding
message dump traces for bad and unexpected replies and widening of
the tag buffer in trace_scmi_dump_msg to allow diverse tag names
4. Miscellaneous updates or improvements
This includes adding the accessor function get_max_msg_size() used
in pinctl protocol, updation of dt-bindings examples for protocol@13
to promote new bindings and simplification of scmi_devm_notifier_unregister
-----BEGIN PGP SIGNATURE-----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=WRU/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Yce+
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.10
1. Basic support for SCMI v3.2 pincontrol protocol
SCMI v3.2 introduces pincontrol protocol which is intended for
controlling pins and their configuration. The pin control protocol
provides commands to:
- List the pins, groups of pins, available functions, and their
association with each other.
- Set the parameter configuration and multiplexing of the pins or
groups of pins
- Optionally request exclusive access to a pin or group of pins.
- Optionally configure the permissions of an agent to access a pin
or group of pins.
These changes adds basic support for the same in the SCMI core layer
and an implementation of the generic scmi-pinctrl driver with associated
DT bindings.
2. Framework support for multiple vendors custom protocols
With the fixed space for vendor protocols, the possibility of having
multiple vendors implementing distinct SCMI vendor protocols with
the same overlapping protocol number is very high and with the need
to support them all in a single kernel image or a module is also high.
In order to implement the same we assume:
- vendor protocols has to be tagged at build time with a vendor_id
- vendor protocols could also optionally be tagged at build time with
sub_vendor_id and implementation version
At the initialisation all the built vendor protocols are registered
with the SCMI core using a key derived from the above tags
3. Logging and tracing improvements
This includes using dev_err_probe() to bail out from probe, adding
message dump traces for bad and unexpected replies and widening of
the tag buffer in trace_scmi_dump_msg to allow diverse tag names
4. Miscellaneous updates or improvements
This includes adding the accessor function get_max_msg_size() used
in pinctl protocol, updation of dt-bindings examples for protocol@13
to promote new bindings and simplification of scmi_devm_notifier_unregister
* tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
pinctrl: Implementation of the generic scmi-pinctrl driver
firmware: arm_scmi: Add basic support for SCMI v3.2 pincontrol protocol
dt-bindings: firmware: Support SCMI pinctrl protocol
firmware: arm_scmi: Introduce get_max_msg_size() helper/accessor
firmware: arm_scmi: Add support for multiple vendors custom protocols
dt-bindings: firmware: arm,scmi: Update examples for protocol@13
firmware: arm_scmi: Avoid non-constant printk format strings
firmware: arm_scmi: Use dev_err_probe to bail out
firmware: arm_scmi: Simplify scmi_devm_notifier_unregister
firmware: arm_scmi: Add message dump traces for bad and unexpected replies
firmware: arm_scmi: Add helper to trace bad messages
include: trace: Widen the tag buffer in trace_scmi_dump_msg
firmware: arm_scmi: Log the perf domain names in the error paths
Link: https://lore.kernel.org/r/20240426105031.1526987-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On some Samsung-based SoCs there are separate bus clocks / gates each
for each pinctrl instance. To be able to access each pinctrl instance's
registers, this bus clock needs to be running, otherwise register
access will hang. Google Tensor gs101 is one example for such an
implementation.
Update the driver to handle this optional bus clock:
* handle an optional bus clock from DT
* prepare it during driver probe
* enclose all relevant register accesses with a clock enable & disable
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20240426-samsung-pinctrl-busclock-v3-2-adb8664b8a7e@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
* Correct GPIO selection and add UART3 pins for Intel Bay Trail
The following is an automated git shortlog grouped by driver:
baytrail:
- Add pinconf group for uart3
- Fix selecting gpio pinctrl state
-----BEGIN PGP SIGNATURE-----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=PWTy
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v6.9-1
* Correct GPIO selection and add UART3 pins for Intel Bay Trail
The following is an automated git shortlog grouped by driver:
baytrail:
- Add pinconf group for uart3
- Fix selecting gpio pinctrl state
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The RZ/G3S SoC supports configurable supply voltages for several of its
I/O interfaces. All of these interfaces support both 1.8V and 3.3V
supplies, but only the Ethernet and XSPI interfaces support a 2.5V
supply.
Voltage selection for the XSPI interface is not yet supported, so this
leaves only the Ethernet interfaces currently supporting selection of a
2.5V supply. So we need to return an error if there is an attempt to
select a 2.5V supply for any non-Ethernet interface.
Fixes: 51996952b8 ("pinctrl: renesas: rzg2l: Add support to select power source for Ethernet pins")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240417114132.6605-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The suffixes of the IRQ identifiers, as used for pins related to the
Interrupt Controller for External Devices (INTC-EX), are inconsistent.
Correct them to match the Pin Multiplex attachment in Rev.0.51 of the
R-Car V4M Series Hardware User's Manual.
Fixes: 291f7856fc ("pinctrl: renesas: Initial R8A779H0 (R-Car V4M) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7d3c7498d9e8eda5583b15f9163eb25bb797ed24.1713282028.git.geert+renesas@glider.be
Commit dce0919c83 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT
source at the same time") removed the setup of TINT from
rzg2l_irqc_irq_enable(). To address the spurious interrupt issue the
setup of TINT has been moved in rzg2l_tint_set_edge() through
rzg2l_disable_tint_and_set_tint_source(). With this, the interrupts are
not properly re-configured after a suspend-to-RAM cycle. To address
this issue and avoid spurious interrupts while resumming set the
interrupt type before enabling it.
Fixes: dce0919c83 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240419063822.3467424-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Hex value will be easier to match hardware register bits layout,
so same as pinconf_generic_dump_config, print hex value.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-ID: <20240412005128.2937486-1-peng.fan@oss.nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Fix a dtbs_check warning on RZ/G3S,
- Fix a lockdep warning on RZ/G2L.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZhkDAgAKCRCKwlD9ZEnx
cA0nAQC3qUp+KQ9D53F1Mr5FdQd4GhNsqEG/iFxHkkrlKLyMwQEA7nQHcu2xseeS
7C4wQROe2+DNdks5u3ye7IA7YtntYgY=
=wObz
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-fixes-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into fixes
pinctrl: renesas: Fixes for v6.9
- Fix a dtbs_check warning on RZ/G3S,
- Fix a lockdep warning on RZ/G2L.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-5-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Message-ID: <20240411064614.7409-4-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-3-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240411064614.7409-2-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-1-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If we fail to allocate propname buffer, we need to drop the reference
count we just took. Because the pinctrl_dt_free_maps() includes the
droping operation, here we call it directly.
Fixes: 91d5c5060e ("pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240415105328.3651441-1-zengheng4@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pass the con_id instead of property so that callers won't repeat
the GPIO suffixes to try.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
GPIO_S0_SC57 / GPIO_S0_SC61 can be muxed to PCU_UART_TXD / PCU_UART_RXD,
add a pinconf group for this.
On Bay Trail board schematics using these pins as UART these are
called UART3_TXD / UART3_RXD, name the pinconf group "uart3_grp"
to be consistent with the schematics.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For all the "score" pin-groups all the intel_pingroup-s to select
the non GPIO function are re-used for byt_score_gpio_groups[].
But this is incorrect since a pin-group includes the mode setting,
which for the non GPIO functions generally is 1, where as to select
the GPIO function mode must be set to 0.
So the GPIO function needs separate intel_pingroup-s with their own mode
value of 0.
Add a new PIN_GROUP_GPIO macro which adds a foo_gpio entry to each
pin-group defined this way and update byt_score_gpio_groups[] to point
to the new foo_gpio entries.
The "sus" usb_oc_grp usb_ulpi_grp and pcu_spi_grp pin-groups are special
because these have a non 0 mode value to select the GPIO functions and
these already have matching foo_gpio pin-groups, leave these are unchanged.
The pmu_clk "sus" groups added in commit 2f46d7f7e9 ("pinctrl: baytrail:
Add pinconf group + function for the pmu_clk") do need to use the new
PIN_GROUP_GPIO macro.
Fixes: 2f46d7f7e9 ("pinctrl: baytrail: Add pinconf group + function for the pmu_clk")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for read-write file to reduce some
duplicated code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20240404193521.3581399-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinctrl-single driver handles pin_config_set by looking up the
requested setting in a DT-defined lookup table, which defines what bits
correspond to each setting. There is no way to add
PIN_CONFIG_BIAS_DISABLE entries to the table, since there is instead
code to disable the bias by applying the disable values of both the
pullup and pulldown entries in the table.
However, this code is inside the table-lookup loop, so it would only
execute if there is an entry for PIN_CONFIG_BIAS_DISABLE in the table,
which can never exist, so this code never runs.
This commit lifts the offending code out of the loop, so it just
executes directly whenever PIN_CONFIG_BIAS_DISABLE is requested,
skippipng the table lookup loop.
This also introduces a new `param` variable to make the code slightly
more readable.
This bug seems to have existed when this code was first merged in commit
9dddb4df90 ("pinctrl: single: support generic pinconf"). Earlier
versions of this patch did have an entry for PIN_CONFIG_BIAS_DISABLE in
the lookup table, but that was removed, which is probably how this bug
was introduced.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Message-ID: <20240319110633.230329-1-matthijs@stdin.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In "struct pcs_function", the 'pgnames' and 'npgnames' fields are unused.
This is a left-over from commit 571aec4df5 ("pinctrl: single: Use generic
pinmux helpers for managing functions");
Remove them.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-ID: <a6b653642298d35b1e3656e9bfc6d1b322fbbe68.1712004518.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In "struct max77620_pin_info", the 'pull_config' field is unused.
In "struct max77620_pctrl_info", the 'pins_current_opt' field is unused.
Remove them.
On my x86_64 config, with allmodconfig, this shrinks the struct
max77620_pctrl_info from 360 bytes to 296.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-ID: <60af8968864ae4a83a76e589b39a2b1e1f65c9db.1711992588.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is a misinterpretation of some of the PIN_CONFIG_* options in this
driver library. PIN_CONFIG_OUTPUT_ENABLE should refer to a buffer or
switch in the output direction of the electrical path. The MediaTek
hardware does not have such a thing. The driver incorrectly maps this
option to the GPIO function's direction.
Likewise, PIN_CONFIG_INPUT_ENABLE should refer to a buffer or switch in
the input direction. The hardware does have such a mechanism, and is
mapped to the IES bit. The driver however sets the direction in addition
to the IES bit, which is incorrect. On readback, the IES bit isn't even
considered.
Ironically, the driver does not support readback for PIN_CONFIG_OUTPUT,
while its readback of PIN_CONFIG_{INPUT,OUTPUT}_ENABLE is what it should
be doing for PIN_CONFIG_OUTPUT.
Rework support for these three options, so that PIN_CONFIG_OUTPUT_ENABLE
is completely removed, PIN_CONFIG_INPUT_ENABLE is only linked to the IES
bit, and PIN_CONFIG_OUTPUT is linked to the GPIO function's direction
and output level.
Fixes: 805250982b ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240327091336.3434141-3-wenst@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the generic pin config library, readback of some options are handled
differently compared to the setting of those options: the argument value
is used to convey enable/disable of an option in the set path, but
success or -EINVAL is used to convey if an option is enabled or disabled
in the debugfs readback path.
PIN_CONFIG_INPUT_SCHMITT_ENABLE is one such option. Fix the readback of
the option in the mediatek-paris library, so that the debugfs dump is
not showing "input schmitt enabled" for pins that don't have it enabled.
Fixes: 1bea6afbc8 ("pinctrl: mediatek: Refine mtk_pinconf_get()")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240327091336.3434141-2-wenst@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core in platform_driver_register() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Message-ID: <20240330210954.100842-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the comment, function prototype, and array of strings indentation
is kinda broken. Reindent that.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-11-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
One header was misplaced and group pinctrl/* ones to show the relation
with the pin control subsystem.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-10-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Simplify the error handling in probe function by switching from
dev_err() to dev_err_probe().
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-9-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The irqchip field is allocated, assigned but never used. Remove it.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-8-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When the variable is declared as u8, no need to perform ' & U8_MAX'
as it's implied anyway.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-7-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are two different ways on how to get HW IRQ number in some functions.
Unify that by using temporary variable and irqd_to_hwirq() call.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-6-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since pin control provides a generic data type and a macro for
the pin function definition, use them in the driver.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-5-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ports are equivalent from the user's point of view. Don't limit
trying them both if writing to one fails.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-4-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pin control subsystem internally uses ENOTSUPP for the not supported
functionality. The checkpatch is false positive about this error code.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-3-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If aw9523_hw_init() fails on ->remove() the mutex left alive.
Destroy it in that case as well. While at it, remove never
true check at the beginning of the function.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-2-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This variable has never been used and can be removed to avoid a W=1 warning:
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:837:6: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
837 | int i = 0;
Fixes: 87466ccd94 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Message-ID: <20240322132205.906729-1-arnd@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmYJVK0VHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGf/sP/3GOk//cQGwPyWCgtCEUo6T4yyD7
1m2TTR0JQk/lcohSFtYk0I20rhKRqU6yAMAERmyehI66D2QY7lhiYVc16ram5y04
x0nWxd9IqerIlGJtaWePOvNqKdCw2EP9fS9NKz58rEDMGlsSf0Rd3NEdSsWoH8td
dECtt8yCawENAMStb/rAfsnL6kn2JIhVMyqwo0RdQfiaVT5Zk6Qgpko0Oq0ncRP2
qdNgHbvnJdKMy81FHSBAi0QEZOYvhFNX+E+6lFfWEsX6xT+wvXddCNQzJf/YV3Cw
Klw1tGveV7UGzlZ4fsnFrv4V6g1KO2AD3342efdDo++ypBEBpImVODc+Rp0jE9Nk
OgdOQRe2k9a5keH0LWY0ehvDbQlSbfNxk0wNtAfo5Kk5e41nHmHJBWCwGG+cXrjJ
mPJjSrTpuNVSaGV0kt3EskHbDBeBmIIg+5QPbldmW2qcC88kWoavkyLD3WPFsg/a
CAuR/HqH7MDfxzvsqTCjonlVcyDKX6aW66LrQ1NCtmphI4F8mdKp746CzGlziuIm
gjYJL/UWVlx0VebMo8dwDpaHvez4/4s6xAJcyqtA+TS5HbrQWKQuwFkiv4iWQxNd
MvyVdzgKhcMdoXhfFpUZ0LlFvHGefJ+Z6N1FQLoQJkTirt5aqRbEAjP0VXwQB4eH
zYygkhvvtiH9/STu
=tx+2
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The "pctldev" struct is allocated in devm_pinctrl_register_and_init().
It's a devm_ managed pointer that is freed by devm_pinctrl_dev_release(),
so freeing it in pinctrl_enable() will lead to a double free.
The devm_pinctrl_dev_release() function frees the pindescs and destroys
the mutex as well.
Fixes: 6118714275 ("pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <578fbe56-44e9-487c-ae95-29b695650f7c@moroto.mountain>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The goal is to extend the active period of pinctrl.
Some devices may need active pinctrl after suspend() and/or before
resume().
So move suspend()/resume() to suspend_noirq()/resume_noirq() in order to
have active pinctrl until suspend_noirq() (included), and from
resume_noirq() (included).
The deprecated API has been removed to use the new one (dev_pm_ops struct).
No need to check the pointer returned by dev_get_drvdata(), as
platform_set_drvdata() is called during the probe.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Message-ID: <20240102-j7200-pcie-s2r-v4-2-6f1f53390c85@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Other pins have _a or _x suffix, but this one doesn't have any. Most
likely this is a typo.
Fixes: dabad1ff85 ("pinctrl: meson: add pinctrl driver support for Meson-A1 SoC")
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Message-ID: <20240325113058.248022-1-jan.dakinevich@salutedevices.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for qcom,pmih0108-gpio and qcom,pmd8028-gpio.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Message-ID: <20240326220628.2392802-5-quic_amelende@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for qcom,pmxr2230-gpio and qcom,pm6450-gpio.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Message-ID: <20240326220628.2392802-4-quic_amelende@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The register offset to disable the internal pull-down of GPIOR~T is 0x630
instead of 0x620, as specified in the Ast2600 datasheet v15
The datasheet can download from the official Aspeed website.
Fixes: 15711ba6ff ("pinctrl: aspeed-g6: Add AST2600 pinconf support")
Reported-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-ID: <20240313092809.2596644-1-billy_tsai@aspeedtech.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The BCM2711 allows to read the bias config. So implement pin_conf_get
accordingly. The pull resistor values has been taken from the
BCM2711/7211 datasheet.
This implementation assumes that BCM7211 behaves the same way.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-ID: <20240307070113.4888-3-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Even the driver already has implemented pin_dbg_show, it could
be helpful to implement pin_conf_get for a more generic behavior.
Contrary to the BCM2711, the BCM2835 SOC doesn't allow to read
the bias config, so the implementation is limited to the basics.
Keep ENOTSUPP here, because it's only used internally.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Message-ID: <20240307070113.4888-2-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since pin control provides a generic data type for the pin group,
use it in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20240311142346.1261203-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since pin control provides a generic data type for the pin function,
use it in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20240311140833.1168742-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lockdep detects a possible deadlock as listed below. This is because it
detects the IA55 interrupt controller .irq_eoi() API is called from
interrupt context while configuration-specific API (e.g., .irq_enable())
could be called from process context on resume path (by calling
rzg2l_gpio_irq_restore()). To avoid this, protect the call of
rzg2l_gpio_irq_enable() with spin_lock_irqsave()/spin_unlock_irqrestore().
With this the same approach that is available in __setup_irq() is mimicked
to pinctrl IRQ resume function.
Below is the lockdep report:
WARNING: inconsistent lock state
6.8.0-rc5-next-20240219-arm64-renesas-00030-gb17a289abf1f #90 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
str_rwdt_t_001./159 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff00000b001d70 (&rzg2l_irqc_data->lock){?...}-{2:2}, at: rzg2l_irqc_irq_enable+0x60/0xa4
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x1e0/0x310
_raw_spin_lock+0x44/0x58
rzg2l_irqc_eoi+0x2c/0x130
irq_chip_eoi_parent+0x18/0x20
rzg2l_gpio_irqc_eoi+0xc/0x14
handle_fasteoi_irq+0x134/0x230
generic_handle_domain_irq+0x28/0x3c
gic_handle_irq+0x4c/0xbc
call_on_irq_stack+0x24/0x34
do_interrupt_handler+0x78/0x7c
el1_interrupt+0x30/0x5c
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x64/0x68
_raw_spin_unlock_irqrestore+0x34/0x70
__setup_irq+0x4d4/0x6b8
request_threaded_irq+0xe8/0x1a0
request_any_context_irq+0x60/0xb8
devm_request_any_context_irq+0x74/0x104
gpio_keys_probe+0x374/0xb08
platform_probe+0x64/0xcc
really_probe+0x140/0x2ac
__driver_probe_device+0x74/0x124
driver_probe_device+0x3c/0x15c
__driver_attach+0xec/0x1c4
bus_for_each_dev+0x70/0xcc
driver_attach+0x20/0x28
bus_add_driver+0xdc/0x1d0
driver_register+0x5c/0x118
__platform_driver_register+0x24/0x2c
gpio_keys_init+0x18/0x20
do_one_initcall+0x70/0x290
kernel_init_freeable+0x294/0x504
kernel_init+0x20/0x1cc
ret_from_fork+0x10/0x20
irq event stamp: 69071
hardirqs last enabled at (69071): [<ffff800080e0dafc>] _raw_spin_unlock_irqrestore+0x6c/0x70
hardirqs last disabled at (69070): [<ffff800080e0cfec>] _raw_spin_lock_irqsave+0x7c/0x80
softirqs last enabled at (67654): [<ffff800080010614>] __do_softirq+0x494/0x4dc
softirqs last disabled at (67645): [<ffff800080015238>] ____do_softirq+0xc/0x14
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rzg2l_irqc_data->lock);
<Interrupt>
lock(&rzg2l_irqc_data->lock);
*** DEADLOCK ***
4 locks held by str_rwdt_t_001./159:
#0: ffff00000b10f3f0 (sb_writers#4){.+.+}-{0:0}, at: vfs_write+0x1a4/0x35c
#1: ffff00000e43ba88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xe8/0x1a8
#2: ffff00000aa21dc8 (kn->active#40){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xf0/0x1a8
#3: ffff80008179d970 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x9c/0x278
stack backtrace:
CPU: 0 PID: 159 Comm: str_rwdt_t_001. Not tainted 6.8.0-rc5-next-20240219-arm64-renesas-00030-gb17a289abf1f #90
Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT)
Call trace:
dump_backtrace+0x94/0xe8
show_stack+0x14/0x1c
dump_stack_lvl+0x88/0xc4
dump_stack+0x14/0x1c
print_usage_bug.part.0+0x294/0x348
mark_lock+0x6b0/0x948
__lock_acquire+0x750/0x20b0
lock_acquire+0x1e0/0x310
_raw_spin_lock+0x44/0x58
rzg2l_irqc_irq_enable+0x60/0xa4
irq_chip_enable_parent+0x1c/0x34
rzg2l_gpio_irq_enable+0xc4/0xd8
rzg2l_pinctrl_resume_noirq+0x4cc/0x520
pm_generic_resume_noirq+0x28/0x3c
genpd_finish_resume+0xc0/0xdc
genpd_resume_noirq+0x14/0x1c
dpm_run_callback+0x34/0x90
device_resume_noirq+0xa8/0x268
dpm_noirq_resume_devices+0x13c/0x160
dpm_resume_noirq+0xc/0x1c
suspend_devices_and_enter+0x2c8/0x570
pm_suspend+0x1ac/0x278
state_store+0x88/0x124
kobj_attr_store+0x14/0x24
sysfs_kf_write+0x48/0x6c
kernfs_fop_write_iter+0x118/0x1a8
vfs_write+0x270/0x35c
ksys_write+0x64/0xec
__arm64_sys_write+0x18/0x20
invoke_syscall+0x44/0x108
el0_svc_common.constprop.0+0xb4/0xd4
do_el0_svc+0x18/0x20
el0_svc+0x3c/0xb8
el0t_64_sync_handler+0xb8/0xbc
el0t_64_sync+0x14c/0x150
Fixes: 254203f9a9 ("pinctrl: renesas: rzg2l: Add suspend/resume support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240320104230.446400-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
There is a problem when a driver requests a shared interrupt line to run a
threaded handler on it without IRQF_ONESHOT set if that flag has been set
already for the IRQ in question by somebody else. Namely, the request
fails which usually leads to a probe failure even though the driver might
have worked just fine with IRQF_ONESHOT, but it does not want to use it by
default. Currently, the only way to handle this is to try to request the
IRQ without IRQF_ONESHOT, but with IRQF_PROBE_SHARED set and if this fails,
try again with IRQF_ONESHOT set. However, this is a bit cumbersome and not
very clean.
When commit 7a36b901a6 ("ACPI: OSL: Use a threaded interrupt handler for
SCI") switched the ACPI subsystem over to using a threaded interrupt
handler for the SCI, it had to use IRQF_ONESHOT for it because that's
required due to the way the SCI handler works (it needs to walk all of the
enabled GPEs before the interrupt line can be unmasked). The SCI interrupt
line is not shared with other users very often due to the SCI handling
overhead, but on sone systems it is shared and when the other user of it
attempts to install a threaded handler, a flags mismatch related to
IRQF_ONESHOT may occur.
As it turned out, that happened to the pinctrl-amd driver and so commit
4451e8e841 ("pinctrl: amd: Add IRQF_ONESHOT to the interrupt request")
attempted to address the issue by adding IRQF_ONESHOT to the interrupt
flags in that driver, but this is now causing an IRQF_ONESHOT-related
mismatch to occur on another system which cannot boot as a result of it.
Clearly, pinctrl-amd can work with IRQF_ONESHOT if need be, but it should
not set that flag by default, so it needs a way to indicate that to the
interrupt subsystem.
To that end, introdcuce a new interrupt flag, IRQF_COND_ONESHOT, which will
only have effect when the IRQ line is shared and IRQF_ONESHOT has been set
for it already, in which case it will be promoted to the latter.
This is sufficient for drivers sharing the interrupt line with the SCI as
it is requested by the ACPI subsystem before any drivers are probed, so
they will always see IRQF_ONESHOT set for the interrupt in question.
Fixes: 4451e8e841 ("pinctrl: amd: Add IRQF_ONESHOT to the interrupt request")
Reported-by: Francisco Ayala Le Brun <francisco@videowindow.eu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Closes: https://lore.kernel.org/lkml/CAN-StX1HqWqi+YW=t+V52-38Mfp5fAz7YHx4aH-CQjgyNiKx3g@mail.gmail.com/
Link: https://lore.kernel.org/r/12417336.O9o76ZdvQC@kreacher
No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander.
I found this living out-of-tree in OpenWrt as an upstream
attempt had stalled on the finishing line, so I picked it
up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of
tree for the ST STA chips, and now the IP was re-used in a
MIPS automotive SoC called MobilEyeq5, so it has been split
in pin control and GPIO drivers so the latter can be reused
by MobilEyeq5. (Along with a long list of cleanups.)
- A lot of overall cleanup and tidying up.
-----BEGIN PGP SIGNATURE-----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=Pt9Y
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander. I found this
living out-of-tree in OpenWrt as an upstream attempt had stalled on
the finishing line, so I picked it up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of tree
for the ST STA chips, and now the IP was re-used in a MIPS
automotive SoC called MobilEyeq5, so it has been split in pin
control and GPIO drivers so the latter can be reused by MobilEyeq5.
(Along with a long list of cleanups)
- A lot of overall cleanup and tidying up"
* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
dt-bindings: pinctrl: qcom: update compatible name for match with driver
pinctrl: aw9523: Make the driver tristate
pinctrl: nomadik: fix dereference of error pointer
gpio: nomadik: Back out some managed resources
pinctrl: aw9523: Add proper terminator
pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
gpio: nomadik: Finish conversion to use firmware node APIs
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
pinctrl: da9062: Add OF table
dt-bindings: pinctrl: at91: add sam9x7
pinctrl: ocelot: remove redundant assignment to variable ret
gpio: nomadik: grab optional reset control and deassert it at probe
gpio: nomadik: support mobileye,eyeq5-gpio
gpio: nomadik: handle variadic GPIO count
gpio: nomadik: support shared GPIO IRQs
...
This contains the usual amount of driver and device tree changes.
Additionally there is a big rework of how pwm lowlevel drivers are
registered to prepare adding character device support.
Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
Brunet, Raag Jadav and Rafał Miłecki for their contributions. And sorry
for those who still need some patience because I didn't manage to empty
my review queue.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmXuyf4ACgkQj4D7WH0S
/k4Yugf+P7gMPuCQJqWLvOyuHjKt4tI3aVsr+jbSiAfbPWaXAQKZunnZ9K17bOI2
JQkDuAi76teNRiVtNEx1ZEdfKe9KgY/Npq8BTmvXxvBktCand8sfhyyRaXYo9FWI
B5qKdp1WIg7ZDMoGQtLRayly4FAsbB0L50SjWmkVIXC2xXp6t6KxxgnOgTM58Oo9
0yYYetF3EOmDQ4J234/muaLbM+1rjajKdw+SgS2mry2WV60SOqo+PQfuK42XjWip
cLDkEgYogwx1MAbFgobtquA7Hvkdb2WyCirTDNZiGIBtmM89kH4Oa8e4IDR6FRqn
w35hJv7sxVjiqBrSMD/lWpJeQ8gPYg==
=6Ixv
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual amount of driver and device tree changes.
Additionally there is a big rework of how pwm lowlevel drivers are
registered to prepare adding character device support.
Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
Brunet, Raag Jadav and Rafał Miłecki for their contributions. And
sorry for those who still need some patience because I didn't manage
to empty my review queue"
* tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (185 commits)
pwm: imx-tpm: fix probe crash due to access registers without clock
pwm: meson: generalize 4 inputs clock on meson8 pwm type
dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types
dt-bindings: pwm: amlogic: fix s4 bindings
pwm: dwc: simplify error handling
pwm: dwc: Add 16 channel support for Intel Elkhart Lake
pwm: dwc: drop redundant error check
staging: greybus: pwm: Make use of devm_pwmchip_alloc() function
staging: greybus: pwm: Rework how the number of PWM lines is determined
staging: greybus: pwm: Drop unused gb_connection_set_data()
staging: greybus: pwm: Rely on pwm framework to pass a valid hwpwm
staging: greybus: pwm: Make use of pwmchip_parent() accessor
staging: greybus: pwm: Change prototype of helpers to prepare further changes
leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of pwmchip_parent() accessor
gpio: mvebu: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Prepare removing pwm_chip from driver data
pwm: vt8500: Make use of devm_pwmchip_alloc() function
...
EPROBE_DEFER error returns are not really critical, since they cancel
the probe process, but the kernel will return later and retry.
However, depending on the probe order, this might issue quite some
verbatim and scary, though pointless messages:
[ 2.388731] 300b000.pinctrl: pin-224 (5000000.serial) status -517
[ 2.397321] 300b000.pinctrl: could not request pin 224 (PH0) from group PH0 on device 300b000.pinctrl
Replace dev_err() with dev_err_probe(), which not only drops the
priority of the message from error to debug, but also puts some text
into debugfs' devices_deferred file, for later reference.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240305143859.2449147-1-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Awinic AW9523(B) is a multi-function I2C gpio expander in a
TQFN-24L package, featuring PWM (max 37mA per pin, or total max
power 3.2Watts) for LED driving capability.
It has two ports with 8 pins per port (for a total of 16 pins),
configurable as either PWM with 1/256 stepping or GPIO input/output,
1.8V logic input; each GPIO can be configured as input or output
independently from each other.
This IC also has an internal interrupt controller, which is capable
of generating an interrupt for each GPIO, depending on the
configuration, and will raise an interrupt on the INTN pin to
advertise this to an external interrupt controller.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20210624214458.68716-2-mail@david-bauer.net
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240301-awinic-aw9523-v8-1-7ec572f5dfb4@linaro.org
Previously driver got a few updates in order to replace OF APIs by
respective firmware node, however it was not finished to the logical
end, e.g., some APIs that has been used are still require OF node
to be passed. Finish that job by converting leftovers to use firmware
node APIs.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240302173401.217830-1-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add OF table as per the binding so that driver get instantiated and
bind automatically when the driver is built as a module.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240226191607.397386-1-biju.das.jz@bp.renesas.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The variable ret is being assigned a value that is never read, it
is being re-assigned a value in every case statement in the following
switch statement. The assignment is redundant and can be removed.
Cleans up clang scan build warning:
drivers/pinctrl/pinctrl-ocelot.c:1404:3: warning: Value stored to 'ret'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240223162850.3914349-1-colin.i.king@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The call to gpiod_to_gpio_device() does not increase the reference count
of the GPIO device struct so it must not be decreased. Remove the buggy
__free() decorator.
Fixes: 524fc108b8 ("pinctrl: stop using gpiod_to_chip()")
Reported-by: David Arcari <darcari@redhat.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240223123214.288181-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We create a custom compatible for the STA2X11 IP block as integrated
into the Mobileye EyeQ5 platform. Its wake and alternate functions have
been disabled, we want to avoid touching those registers.
We both do: (1) early return in functions that do not support the
platform, but with warnings, and (2) avoid calling those functions in
the first place.
We ensure that pinctrl-nomadik is not used with this STA2X11 variant.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-24-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move away from statically allocated GPIO IDs. Switch to dynamic ID
allocation. Static IDs are deprecated because they cause issues when
multiple GPIO controllers are to be found on the same platform.
Add a bit of complexity to do pin number -> GPIO chip + offset.
Previously, bank number and offsets were retrieved using division and
remainder (bank size being constant 32). Now, to get the pin number
matching a bank base, we must know the sum of ngpios of previous banks.
This is done in find_nmk_gpio_from_pin() which also exposes the offset
inside the bank.
Also remove the assumption that bank sizes are constant. Instead of
using NMK_GPIO_PER_CHIP as bank size, use nmk_gpio_chips[i]->ngpio.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-19-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix strict checkpatch warnings relative to if-else blocks and bool
expressions. Message types addressed:
CHECK: Comparison to NULL could be written "!nmk_cfg_params[index].choice"
CHECK: Unbalanced braces around else statement
CHECK: Using comparison to false is error prone
CHECK: Using comparison to true is error prone
CHECK: braces {} should be used on all arms of this statement
Before: 0 errors, 1 warnings, 16 checks.
After: 0 errors, 1 warnings, 7 checks.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-13-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
nmk_pinctrl_probe() iterates over each GPIO block. Use an early
conditional continue to skip to the next iteration rather than indent
all the loop code block.
Do not change code logic. The block is changed from:
for (i = 0; i < NMK_MAX_BANKS; i++) {
x = of_parse_phandle(...);
if (x) {
... do work ...
}
}
To:
for (i = 0; i < NMK_MAX_BANKS; i++) {
x = of_parse_phandle(...);
if (!x)
continue;
... do work ...
}
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-10-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix compiler warning found in the pinctrl-nomadik platform driver. GCC
message is as such:
drivers/pinctrl/nomadik/pinctrl-nomadik.c:1169:12: warning: cast from
pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-9-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix compiler warning found in the pinctrl-nomadik platform driver. GCC
message is as such:
drivers/pinctrl/nomadik/pinctrl-nomadik.c:855:21: warning:
format ‘%u’ expects argument of type ‘unsigned int’, but argument 5
has type ‘size_t {aka const long unsigned int}’ [-Wformat=]
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-8-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
PINCTRL_NOMADIK, PINCTRL_STN8815 and PINCTRL_DB8500 depend on ARCH_U8500
or ARCH_NOMADIK. Add COMPILE_TEST as an option to allow test building
the driver.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-7-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Previously, drivers/pinctrl/nomadik/pinctrl-nomadik.c registered two
platform drivers: pinctrl & GPIO. Move the GPIO aspect to the
drivers/gpio/ folder, as would be expected.
Both drivers are intertwined for a reason; pinctrl requires access to
GPIO registers for pinmuxing, pull-disable, disabling interrupts while
setting the muxing and wakeup control. Information sharing is done
through a shared array containing GPIO chips and a few helper
functions. That shared array is not touched from gpio-nomadik when
CONFIG_PINCTRL_NOMADIK is not defined.
Make no change to the code that moved into gpio-nomadik; there should be
no behavior change following. A few functions are shared and header
comments are added. Checkpatch warnings are addressed. NUM_BANKS is
renamed to NMK_MAX_BANKS.
It is supported to compile gpio-nomadik without pinctrl-nomadik. The
opposite is not true.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-6-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Previously, the statement looked like:
slpm[x] &= ~BIT(g->grp.pins[i]);
Where:
- slpm is a unsigned int pointer;
- g->grp.pins[i] is a pin number. It can grow to more than 32.
The expected shift amount is a pin bank offset.
This bug does not occur on every group or pin: the altsetting must be
NMK_GPIO_ALT_C and the pin must be 32 or above. It might have occured.
For example, in pinctrl-nomadik-db8500.c, pin group i2c3_c_2 has the
right altsetting and pins 229 and 230.
Fixes: dbfe8ca259 ("pinctrl/nomadik: implement pin multiplexing")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-5-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add support for the R-Car V4M (R8A779H0) SoC,
- Add support for suspend/resume on the RZ/G2L family,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZdh+5gAKCRCKwlD9ZEnx
cKiIAP9/dNg+l+cgCuI24EKaIehYnjq54clsWycHBV8i41brPgEAutwuYNMG++Vd
B/iDXOihVSvOhjpQluQMtoYaUBmOCQc=
=N37y
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.9 (take two)
- Add support for the R-Car V4M (R8A779H0) SoC,
- Add support for suspend/resume on the RZ/G2L family,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Link: https://lore.kernel.org/r/20240217093937.58234-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The conversion to DEFINE_NOIRQ_DEV_PM_OPS() lost the ability of the
compiler to optimize away the struct dev_pm_ops object when it is not
needed.
Fix this by replacing the use of pm_sleep_ptr() by a custom wrapper.
Fixes: 727eb02eb7 ("pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/6238a78e32fa21f0c795406b6cba7bce7af92577.1708513940.git.geert+renesas@glider.be
pinctrl-rzg2l driver is used on RZ/G3S which support deep sleep states
where power to most of the SoC components is turned off.
For this add suspend/resume support. This involves saving and restoring
configured registers along with disabling clock in case there is no pin
configured as wakeup sources.
To save/restore registers 2 caches were allocated: one for GPIO pins and
one for dedicated pins.
On suspend path the pin controller registers are saved and if none of the
pins are configured as wakeup sources the pinctrl clock is disabled.
Otherwise it remains on.
On resume path the configuration is done as follows:
1/ setup PFCs by writing to registers on pin based accesses
2/ setup GPIOs by writing to registers on port based accesses and
following configuration steps specified in hardware manual
3/ setup dedicated pins by writing to registers on port based accesses
4/ setup interrupts.
Because interrupt signals are routed to IA55 interrupt controller and
IA55 interrupt controller resumes before pin controller, patch restores
also the configured interrupts just after pin settings are restored to
avoid invalid interrupts while resuming.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240215124112.2259103-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The pinctrl-rzg2l driver accesses gpio_chip.irq, which is available only
if CONFIG_GPIOLIB_IRQCHIP=y, and uses APIs that are defined only if
CONFIG_IRQ_DOMAIN_HIERARCHY=y (irq_chip_*_parent() APIs).
On ARCH_RZG2L, CONFIG_IRQ_DOMAIN_HIERARCHY is selected anyway, e.g. by
CONFIG_ARM_GIC_V3, but CONFIG_GPIOLIB_IRQCHIP is not (it is on R-Car).
Make this explicit at the driver level for a clearer view of the
dependencies.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240215124112.2259103-2-claudiu.beznea.uj@bp.renesas.com
[geert: select GPIOLIB_IRQCHIP, too]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Currently on irq_disable(), we are disabling gpio interrupt enable(ISEL).
That means the pin is just gpio input and not gpio input interrupt any
more. So, move configuring ISEL in rzg2l_gpio_child_to_parent_hwirq()/
rzg2l_gpio_irq_domain_free() so that the pin will be gpioint always even
during irq_disable().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240206135318.165426-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Configure GPIO interrupt as input mode. Also if the bootloader sets
gpio interrupt pin as function, override it as gpio.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240206135115.151218-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The driver for stm32mp257 is missing the suspend callback in
struct dev_pm_ops.
Add the callback, using the common stm32_pinctrl_suspend()
function.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Fixes: 619f8ca4a7 ("pinctrl: stm32: add stm32mp257 pinctrl support")
Link: https://lore.kernel.org/r/20240207104604.174843-1-antonio.borneo@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add pin groups for SCIF_CLK2 on R-Car V4H,
- Add support for port pins P19 to P28 on RZ/Five,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZcZV0wAKCRCKwlD9ZEnx
cAQ6AP9RPb5CW91132jjfoF/+dzAyEZj2YR8ndjrzN2QzOn4tQEAlfEOlavoTikB
oXQsRHGaeV8HQr02OEZgNJWYDXQMrAY=
=cnIJ
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.9
- Add pin groups for SCIF_CLK2 on R-Car V4H,
- Add support for port pins P19 to P28 on RZ/Five,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPINTEN register contains information about GPIOs with enabled
interrupts no need to check other GPIOs for changes.
Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
Link: https://lore.kernel.org/r/20240201141406.32484-2-arturas.moskvinas@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The MT8192 does not support configuring pin slew rate. This is evident
from both the datasheet, and the fact that the driver points the slew
rate register range at the GPIO direction register range.
Drop the bogus setting.
Fixes: d32f38f2a8 ("pinctrl: mediatek: Add pinctrl driver for mt8192")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131071910.3950450-2-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The MT8186 does not support configuring pin slew rate. This is evident
from both the datasheet, and the fact that the driver points the slew
rate register range at the GPIO direction register range.
Drop the bogus setting.
Fixes: 8b483bda1e ("pinctrl: add pinctrl driver on mt8186")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131071910.3950450-1-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the missing port pins P19 to P28 for RZ/Five SoC. These additional
pins provide expanded capabilities and are exclusive to the RZ/Five SoC.
Couple of port pins have different configuration and are not identical for
the complete port so introduce struct rzg2l_variable_pin_cfg to handle
such cases and introduce the PIN_CFG_VARIABLE macro. The actual pin config
is then assigned in rzg2l_pinctrl_get_variable_pin_cfg().
Add an additional check in rzg2l_gpio_get_gpioint() to only allow GPIO pins
which support interrupt facility.
While at define RZG2L_GPIO_PORT_PACK() using RZG2L_GPIO_PORT_SPARSE_PACK().
Update the gpio-ranges property in the RZ/Five SoC DTSI, as it must
match the driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129135556.63466-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Link: https://lore.kernel.org/r/20240129135556.63466-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Currently we assume all the port pins are sequential ie always PX_0 to
PX_n (n=1..7) exist, but on RZ/Five SoC we have additional pins P19_1 to
P28_5 which have holes in them, for example only one pin on port19 is
available and that is P19_1 and not P19_0. So to handle such cases
include pinmap for each port which would indicate the pin availability
on each port. As the pincount can be calculated based on pinmap drop this
from RZG2L_GPIO_PORT_PACK() macro.
Previously we had a max of 7 pins on each port but on RZ/Five Port-20
has 8 pins, so move the single pin configuration to BIT(63).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129135556.63466-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
If the number of provided enum IDs in a variable width config register
description does not match the expected number, the checker uses the
expected number for validating the individual enum IDs.
However, this may cause out-of-bounds accesses on the array holding the
enum IDs, leading to bogus enum_id conflict warnings. Worse, if the bug
is an incorrect bit field description (e.g. accidentally using "12"
instead of "-12" for a reserved field), thousands of warnings may be
printed, overflowing the kernel log buffer.
Fix this by limiting the enum ID check to the number of provided enum
IDs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c7385f44f2faebb8856bcbb4e908d846fc1531fb.1705930809.git.geert+renesas@glider.be
Commit d3aaa7203a ("pinctrl: renesas: rzg2l: Add pin configuration
support for pinmux groups") introduced the possibility to parse pin
configuration for pinmux groups. It did that by calling
rzg2l_map_add_config() at the end of rzg2l_dt_subnode_to_map() and
jumping to the remove_group label in case rzg2l_map_add_config() failed.
But if that happens, the mutex will already be unlocked, thus this it will
lead to double mutex unlock operation. To fix this move the
rzg2l_map_add_config() call just after all the name argument is ready and
before the mutex is locked. There is no harm in doing this, as this only
parses the data from device tree that will be further processed by
pinctrl core code.
Fixes: d3aaa7203a ("pinctrl: renesas: rzg2l: Add pin configuration support for pinmux groups")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/f8c3a3a0-7c48-4e40-8af0-ed4e9d9b049f@moroto.mountain
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240115153453.99226-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use str_high_low() rather than open coding.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240129153138.3221604-3-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove some pointless inline declarations, no reason not to let the
compiler decide.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240129153138.3221604-2-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixup a couple of incorrect header includes.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240129153138.3221604-1-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific devm_kcalloc() function instead of the
argument size * count in the devm_kzalloc() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240119181909.7079-1-erick.archer@gmx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add new emmc groups in the pinctrl driver for the
MediaTek MT7981 SoC:
* emmc reset, with pin 15.
* emmc 4-bit bus-width, with pins 16 to 19, and 24 to 25.
* emmc 8-bit bus-width, with pins 16 to 25.
The existing emmc_45 group is kept for legacy reasons, even
if this is the union of emmc_reset and emmc_8 groups.
Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240117145547.3354242-1-jean.thomas@wifirst.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add uart1_3 (pins 26, 27) group to the pinctrl driver for the
MediaTek MT7981 SoC.
Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240117124234.3137050-1-jean.thomas@wifirst.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix kernel-doc warnings for enum (anonymous): the enum values are not
documented, so don't indicate that the comment contains kernel-doc
notation.
pinctrl-mt7986.c:68: warning: Enum value 'GPIO_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_RT_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_RB_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_LT_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_LB_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_TR_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_TL_BASE' not described in enum '(anonymous)'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312110210.x3vxq42A-lkp@intel.com/
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: <linux-gpio@vger.kernel.org>
Cc: Sean Wang <sean.wang@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: <linux-mediatek@lists.infradead.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lore.kernel.org/r/20240111045126.13768-1-rdunlap@infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Return pinctrl_gpio_direction_output() in order to transfer the error
if it fails.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240103085058.3771653-1-nichen@iscas.ac.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core changes:
- A new PINCTRL_GROUP_DESC() infrastructure macro is added and
used in different drivers, generic group description struct
group_desc is now used all over the place.
New drivers:
- New driver for the Texas Instruments TPS6494 Power Management IC.
- New driver for the Lantic PEF2256 framer pin multiplexer.
This IC has some pins that can be reconfigured in different
ways. The actual driver comes on an immutable branch with the
net WAN parts, the IC is some latest-and-greatest serial line
funnel for e.g. wireless access points.
- New subdriver for the Samsung Exynos Auto V920 pin controller,
used for automotive applications.
- New subdriver for the Samsung "GS101" SoC pin controller, this
is the Google "Tensor" SoC used in the Google Pixel 6.
- New subdriver for the Intel Meteor Point SoC pin controller.
- New subdriver for the Qualcomm SM8650 top level (TLMM) and LPASS pin
controllers.
- New subdriver for the Qualcomm X1E80100 top level (TLMM) pin
controller.
- New subdriver for the Qualcomm SM4450 top level (TLMM) pin
controller.
- The "single" pin controller now supports the Texas Instruments
J7200 SoC.
Improvements:
- Intel has created a new (Intel-)generic pin controller driver that
is now used by all contemporary Intel platforms.
- Intel is now also making use of some cleanup helpers.
- Enble 910 Ohm bias in the Intel Tangier driver.
- The Samsung driver now suppors irq_set_affinity() in it's IRQ chip
giving support for non wake up external gpio interrupts.
-----BEGIN PGP SIGNATURE-----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=kj/d
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"For this kernel cycle I managed an immutable branch for the PEF2256
WAN framer that has some pin control portions. It already landed in
your tree through the net pull request but here it is mentioned again.
The most interesting is perhaps the Samsung Exynos subdrivers for the
Tensor SoC used in Google Pixel 6 and the ExynosAuto subdriver for
automotive. Along with the earlier merged Tesla FSD subdriver it shows
some of the versatile uses of the Samsung Exynos silicon. It is also
used in the latest version of Axis Communications ARTPEC chips so it
is a very widely deployed SoC family.
We also have the Intel Meteor Lake SoC which I think is for laptops.
It's a pretty interesting chip with Xe graphics and integrated PCH.
Core changes:
- A new PINCTRL_GROUP_DESC() infrastructure macro is added and used
in different drivers, generic group description struct group_desc
is now used all over the place.
New drivers:
- New driver for the Texas Instruments TPS6494 Power Management IC.
- New driver for the Lantic PEF2256 framer pin multiplexer. This IC
has some pins that can be reconfigured in different ways. The
actual driver comes on an immutable branch with the net WAN parts,
the IC is some latest-and-greatest serial line funnel for e.g.
wireless access points.
- New subdriver for the Samsung Exynos Auto V920 pin controller, used
for automotive applications.
- New subdriver for the Samsung "GS101" SoC pin controller, this is
the Google "Tensor" SoC used in the Google Pixel 6.
- New subdriver for the Intel Meteor Point SoC pin controller.
- New subdriver for the Qualcomm SM8650 top level (TLMM) and LPASS
pin controllers.
- New subdriver for the Qualcomm X1E80100 top level (TLMM) pin
controller.
- New subdriver for the Qualcomm SM4450 top level (TLMM) pin
controller.
- The "single" pin controller now supports the Texas Instruments
J7200 SoC.
Improvements:
- Intel has created a new (Intel-)generic pin controller driver that
is now used by all contemporary Intel platforms.
- Intel is now also making use of some cleanup helpers.
- Enble 910 Ohm bias in the Intel Tangier driver.
- The Samsung driver now suppors irq_set_affinity() in it's IRQ chip
giving support for non wake up external gpio interrupts"
* tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits)
pinctrl: samsung: constify iomem pointers
pinctrl: cy8c95x0: Cache muxed registers
dt-bindings: pinctrl: xilinx: Rename *gpio to *gpio-grp
pinctrl: qcom: lpass-lpi: remove duplicated include
dt-bindings: pinctrl: qcom: drop common properties and allow wakeup-parent
dt-bindings: pinctrl: qcom: drop common properties
dt-bindings: pinctrl: qcom,ipq5018-tlmm: use common TLMM bindings
dt-bindings: pinctrl: qcom,x1e80100-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8650-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8550-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sdx75-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sa8775p-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,qdu1000-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom: create common LPASS LPI schema
pinctrl: qcom: sm4450: dd SM4450 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
dt-bindings: pinctrl: qcom,pmic-mpp: clean up example
pinctrl: intel: Add Intel Meteor Point pin controller and GPIO support
pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins
pinctrl: renesas: rzg2l: Add output enable support
...
Core GPIOLIB:
- protect the global list of GPIO devices with a read-write semaphore as
it is rarely modified but can be traversed by multiple readers at once
- remove GPIO devices from the global list when they are *unregistered*
and not when they are *released* (which only happens when the last
reference is dropped) as this may lead to a successful lookup of an
unregistered device
- remove the unnecessary "extra_checks" switch
- rename functions that are called with a lock taken
- remove duplicate includes
Character device handling:
- use locking guards to reduce the code size
- allocate the big linereq structure using the more suitable kvzalloc()
- redulce the size of critical sections
- improve documentation
- move the debounce_period_us field out of struct gpio_desc
New drivers:
- Nuvoton NPCM SGPIO driver for BMC NPCM7xx/NPCM8xx
- Realtek DHC (Digital Home Center) SoC GPIO driver
Driver improvements:
- replace gpiochip_is_requested() with a safer alternative in the form of
gpiochip_dup_line_label() as the former returns a pointer to a string that
can be deleted
- implement the dbg_show() callback in gpio-sim
- improve the coding style for local variables by removing unnecessary tabs
- use generic device properties instead of OF variants in gpio-mmio
- use the preferred coding style for __free() in gpio-mockup
- reuse PM ops from the gpio-tangier in gpio-elkhartlake
- rework PM and use cleanup helpers in gpio-tangier
- fix the EIC configuration in gpio-pmic-eic-sprd
- remove the unneeded call to platform_set_drvdata() in gpio-sifive
- use generic GPIO helpers for driver callbacks in gpio-dwapb
- add clock support on certain pins of gpio-ixp4xx
- don't use the core-specific DEBUG_GPIO switch in drivers
- kerneldoc improvements
DT bindings:
- add bindings for the new Realtek and Nuvoton devices
- allow gpio-ranges in gpio-dwapb
- support GPIO hogs in gpio-rockchip
- describe the label property in gpio-zynqmp-modepin
Other:
- header cleanups
- forward declarations cleanups
-----BEGIN PGP SIGNATURE-----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=bcXn
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have two new drivers, an assortment of updates and cleanups to many
others, and first part of the big rework of the core GPIOLIB that's
currently underway.
Add to that some code shrink in the character device module and
updates to DT bindings and that's pretty much it.
Core GPIOLIB:
- protect the global list of GPIO devices with a read-write semaphore
as it is rarely modified but can be traversed by multiple readers
at once
- remove GPIO devices from the global list when they are
*unregistered* and not when they are *released* (which only happens
when the last reference is dropped) as this may lead to a
successful lookup of an unregistered device
- remove the unnecessary "extra_checks" switch
- rename functions that are called with a lock taken
- remove duplicate includes
Character device handling:
- use locking guards to reduce the code size
- allocate the big linereq structure using the more suitable
kvzalloc()
- redulce the size of critical sections
- improve documentation
- move the debounce_period_us field out of struct gpio_desc
New drivers:
- Nuvoton NPCM SGPIO driver for BMC NPCM7xx/NPCM8xx
- Realtek DHC (Digital Home Center) SoC GPIO driver
Driver improvements:
- replace gpiochip_is_requested() with a safer alternative in the
form of gpiochip_dup_line_label() as the former returns a pointer
to a string that can be deleted
- implement the dbg_show() callback in gpio-sim
- improve the coding style for local variables by removing
unnecessary tabs
- use generic device properties instead of OF variants in gpio-mmio
- use the preferred coding style for __free() in gpio-mockup
- reuse PM ops from the gpio-tangier in gpio-elkhartlake
- rework PM and use cleanup helpers in gpio-tangier
- fix the EIC configuration in gpio-pmic-eic-sprd
- remove the unneeded call to platform_set_drvdata() in gpio-sifive
- use generic GPIO helpers for driver callbacks in gpio-dwapb
- add clock support on certain pins of gpio-ixp4xx
- don't use the core-specific DEBUG_GPIO switch in drivers
- kerneldoc improvements
DT bindings:
- add bindings for the new Realtek and Nuvoton devices
- allow gpio-ranges in gpio-dwapb
- support GPIO hogs in gpio-rockchip
- describe the label property in gpio-zynqmp-modepin
Other:
- header cleanups
- forward declarations cleanups"
* tag 'gpio-updates-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpiolib: replace the GPIO device mutex with a read-write semaphore
gpiolib: remove the GPIO device from the list when it's unregistered
gpio: nuvoton: Add Nuvoton NPCM sgpio driver
dt-bindings: gpio: add NPCM sgpio driver bindings
gpio: rtd: Add support for Realtek DHC(Digital Home Center) RTD SoCs
dt-bindings: gpio: realtek: Add realtek,rtd-gpio
gpio: pmic-eic-sprd: Configure the bit corresponding to the EIC through offset
gpio: dwapb: Use generic request, free and set_config
gpio: sysfs: drop tabs from local variable declarations
gpiolib: drop tabs from local variable declarations
gpiolib: remove extra_checks
gpio: tps65219: don't use CONFIG_DEBUG_GPIO
gpiolib: cdev: replace locking wrappers for gpio_device with guards
gpiolib: cdev: replace locking wrappers for config_mutex with guards
gpiolib: cdev: allocate linereq using kvzalloc()
gpiolib: cdev: include overflow.h
gpiolib: cdev: reduce locking in gpio_desc_to_lineinfo()
gpiolib: cdev: improve documentation of get/set values
gpiolib: cdev: fully adopt guard() and scoped_guard()
gpiolib: remove debounce_period_us from struct gpio_desc
...
Constify few pointers to iomem, where the destination memory is not
modified, for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20231223191902.22857-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep
warning:
============================================
WARNING: possible recursive locking detected
6.7.0-rc5-wt+ #532 Not tainted
--------------------------------------------
sh/92 is trying to acquire lock:
c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
but task is already holding lock:
c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by sh/92:
#0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178
#1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284
#2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284
#3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8
#4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c
#5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
stack backtrace:
CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532
Hardware name: Atmel SAMA5
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x48
dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c
__lock_acquire from lock_acquire.part.0+0x124/0x2d0
lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78
_raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100
__irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204
irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4
atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204
irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8
gpio_keys_suspend from dpm_run_callback+0xe4/0x248
dpm_run_callback from __device_suspend+0x234/0x91c
__device_suspend from dpm_suspend+0x224/0x43c
dpm_suspend from dpm_suspend_start+0x9c/0xa8
dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84
suspend_devices_and_enter from pm_suspend+0x460/0x4e8
pm_suspend from state_store+0x78/0xe4
state_store from kernfs_fop_write_iter+0x1a0/0x284
kernfs_fop_write_iter from vfs_write+0x38c/0x6f4
vfs_write from ksys_write+0xd8/0x178
ksys_write from ret_fast_syscall+0x0/0x1c
Exception stack(0xc52b3fa8 to 0xc52b3ff0)
3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001
3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190
3fe0: 00000004 b6c61678 aec5a041 aebf1a26
This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever
a wake up source configures an IRQ through irq_set_irq_wake, it will
lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent"
IRQ which will do the same on its own IRQ desc, but since those two locks
share the same class, lockdep reports this as an issue.
Fix lockdep false positive by setting a different class for parent and
children IRQ
Fixes: 776180848b ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently the port specific registers behind the PORTSEL mux aren't
cached in the regmap and thus the typical setup time for a single pin
on cy8c9560 is about 200msec on our system. The hotspot is the IRQ
(un)masking, which causes lots of R/W operations.
Introduce a separate regmap for muxed registers and helper functions
to use the newly introduced regmap for muxed register access under
the i2c lock.
With the new cache in place the typical pin setup time is reduced to
20msec, making it about 10 times faster. As a side effect the system
boot time is also reduced by 50%.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20231219125350.4031370-1-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 1fa3df901f ("pinctrl: cy8c95x0: Remove custom ->set_config()")
removed support for PIN_CONFIG_INPUT_ENABLE and
PIN_CONFIG_OUTPUT.
Add the following options to restore functionality:
- PIN_CONFIG_INPUT_ENABLE
- PIN_CONFIG_OUTPUT_ENABLE
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20231219125120.4028862-2-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
remove the second #include <linux/seq_file.h>
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/202312151810+0800-wangjinchao@xfusion.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pinctrl driver for TLMM block found in SM4450 SoC.
Can Guo helped out in reviewing the driver.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231212094900.12615-3-quic_tengfan@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* New agnostic driver to support Lunar Lake and newer platforms
* New driver for Intel Meteor Point-S (PCH for Meteor Lake-S)
* Update drivers to use new PM helpers
* Use RAII for locking in a few drivers (Raag, Andy)
* Reduce locking scope in some functions (Raag)
* Miscellaneous cleanups (Raag)
The following is an automated git shortlog grouped by driver:
alderlake:
- Switch to use Intel pin control PM ops
baytrail:
- Simplify code with cleanup helpers
- Move default strength assignment to a switch-case
- Factor out byt_gpio_force_input_mode()
- Fix types of config value in byt_pin_config_set()
broxton:
- Switch to use Intel pin control PM ops
cannonlake:
- Switch to use Intel pin control PM ops
cedarfork:
- Switch to use Intel pin control PM ops
denverton:
- Switch to use Intel pin control PM ops
elkhartlake:
- Switch to use Intel pin control PM ops
emmitsburg:
- Switch to use Intel pin control PM ops
geminilake:
- Switch to use Intel pin control PM ops
icelake:
- Switch to use Intel pin control PM ops
intel:
- Add Intel Meteor Point pin controller and GPIO support
- use the correct _PM_OPS() export macro
- Add a generic Intel pin control platform driver
- Revert "Unexport intel_pinctrl_probe()"
- allow independent COMPILE_TEST
- Refactor intel_pinctrl_get_soc_data()
- Move default strength assignment to a switch-case
- Make PM ops functions static
- Provide Intel pin control wide PM ops structure
jasperlake:
- Switch to use Intel pin control PM ops
lakefield:
- Switch to use Intel pin control PM ops
lewisburg:
- Switch to use Intel pin control PM ops
lynxpoint:
- Simplify code with cleanup helpers
meteorlake:
- Switch to use Intel pin control PM ops
sunrisepoint:
- Switch to use Intel pin control PM ops
tangier:
- simplify locking using cleanup helpers
- Move default strength assignment to a switch-case
- Enable 910 Ohm bias
tigerlake:
- Switch to use Intel pin control PM ops
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmWAKiUACgkQb7wzTHR8
rCgi/A/8CBFdd32S5gp/BIymhXIeU8FTee9khST9eX4Zn3Ox5VUjdDzKIaSk432z
cJW7ycbAT94YhGVqmHh05pO73qH5LtEGk79ccRWWrAqAT6WmmmYn1OOWPBLOyHdC
2ekSwmYe64BTk0UoAvYz6/BRFy8o3onET+HYtZwiMNvqdBvdBfCiVtkJK5KmNyPV
wbNOs1xfA9drH68T7k23UvmbjY84s6t/ftPwws+kh0YmkkR65GASNlS167xxXTbX
M72mLeY+NJt8fFaawJahQTKhAMc6K7s3udgFh0Gmt1paWsJ6ABu+RIDOaPIWVtAC
5hMlbYFVC2y3QpjXlW8SWGq2WzoN+hzM/e/KTo2/7QzY/pt95q/TDyE/RJfFWYhS
PkCTcdzkDjyrOmfbNatumIZZEfoRg7Ddw9Cn1NwDJQrFHAMJhcqsPaxrZ0CtCJYn
o/1kU7QvlQB3EGZiucQouy8b5yz/96I811htfqvEoNNrtz4g1AI5Wkfw3dusY0jB
oQaYG2M7fxI4u9AzU5+yfhk2cdxU1dv7+GStSXzc8GcppID5ub8bmpU6mARFFglV
NJwvS529sP3+XSqvSApS1uZR+fRJFX3Fpo5QMBJm12UOPFLc4EDCnalc48WCLD2q
yn2uCvssiAEogCKKy8ZAEi8aWlT706eGg5G2+9KhaJ+lfLFGfiA=
=72T1
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.8-1
* New agnostic driver to support Lunar Lake and newer platforms
* New driver for Intel Meteor Point-S (PCH for Meteor Lake-S)
* Update drivers to use new PM helpers
* Use RAII for locking in a few drivers (Raag, Andy)
* Reduce locking scope in some functions (Raag)
* Miscellaneous cleanups (Raag)
The following is an automated git shortlog grouped by driver:
alderlake:
- Switch to use Intel pin control PM ops
baytrail:
- Simplify code with cleanup helpers
- Move default strength assignment to a switch-case
- Factor out byt_gpio_force_input_mode()
- Fix types of config value in byt_pin_config_set()
broxton:
- Switch to use Intel pin control PM ops
cannonlake:
- Switch to use Intel pin control PM ops
cedarfork:
- Switch to use Intel pin control PM ops
denverton:
- Switch to use Intel pin control PM ops
elkhartlake:
- Switch to use Intel pin control PM ops
emmitsburg:
- Switch to use Intel pin control PM ops
geminilake:
- Switch to use Intel pin control PM ops
icelake:
- Switch to use Intel pin control PM ops
intel:
- Add Intel Meteor Point pin controller and GPIO support
- use the correct _PM_OPS() export macro
- Add a generic Intel pin control platform driver
- Revert "Unexport intel_pinctrl_probe()"
- allow independent COMPILE_TEST
- Refactor intel_pinctrl_get_soc_data()
- Move default strength assignment to a switch-case
- Make PM ops functions static
- Provide Intel pin control wide PM ops structure
jasperlake:
- Switch to use Intel pin control PM ops
lakefield:
- Switch to use Intel pin control PM ops
lewisburg:
- Switch to use Intel pin control PM ops
lynxpoint:
- Simplify code with cleanup helpers
meteorlake:
- Switch to use Intel pin control PM ops
sunrisepoint:
- Switch to use Intel pin control PM ops
tangier:
- simplify locking using cleanup helpers
- Move default strength assignment to a switch-case
- Enable 910 Ohm bias
tigerlake:
- Switch to use Intel pin control PM ops
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1. New hardware: Add pin controllers for Samsung ExynosAutov920 and
Google Tensor GS101.
2. Few DT bindings cleanups: add specific compatibles for each device
using generic compatible as fallback. This affects only DTS, no
driver changes are needed.
3. Allow setting affinity on non wake-up external GPIO interrupts.
-----BEGIN PGP SIGNATURE-----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=hlN6
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.8
1. New hardware: Add pin controllers for Samsung ExynosAutov920 and
Google Tensor GS101.
2. Few DT bindings cleanups: add specific compatibles for each device
using generic compatible as fallback. This affects only DTS, no
driver changes are needed.
3. Allow setting affinity on non wake-up external GPIO interrupts.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add pinmux groups, power source, and input/output enable support for
Ethernet pins on RZ/G2L SoCs,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZXxCWwAKCRCKwlD9ZEnx
cGH/APsEC7rILFNMeP4o25rQHbqf/xIx+6KBZIXjH+ia+4uFJwEAkljmLIupZ7BB
L3QlxtdIk87wvzh5ZLfL9g4IK+ig2gk=
=5+7i
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.8 (take two)
- Add pinmux groups, power source, and input/output enable support for
Ethernet pins on RZ/G2L SoCs,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This driver supports pinctrl/GPIO hardware found on Intel Meteor Point
(a Meteor Lake PCH) providing users a pinctrl and GPIO interfaces
including GPIO interrupts.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some of the RZ/G3S Ethernet pins (P1_0, P7_0) can be configured with
input enable. Enable this functionality for these pins.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-8-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Some of the Ethernet pins on RZ/G3S (but also valid for RZ/G2L) need to
have the direction of the IO buffer set as output for Ethernet to work
properly. On RZ/G3S, these pins are P1_0/P7_0, P1_1/P7_1, and can have
the following Ethernet functions: TXC/TX_CLK or TX_CTL/TX_EN.
As the pins supporting output enable are SoC specific, and there is a
limited number of these pins (TXC/TX_CLK and/or TX_CTL/TX_EN), specify
output enable capable port limits in the platform-based configuration
data structure, to ensure proper validation.
The OEN support has been intantiated for RZ/G3S at the moment.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-7-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The GPIO controller available on RZ/G3S (but also on RZ/G2L) supports
setting the power source for Ethernet pins. Based on the interface b/w
the Ethernet controller and the Ethernet PHY, and on board design, a
specific power source needs to be selected. The GPIO controller
supports 1.8V, 2.5V, and 3.3V power source selection for the Ethernet
pins. This can be selected though the ETHx_POC registers (x={0, 1}).
Adjust the driver to support this, and to do proper instantiation for
the RZ/G3S and RZ/G2L SoCs. On RZ/G2L only the get operation has been
tested at the moment.
While at it, as the power registers on RZ/G2L support access sizes of 8
bits, and these registers on RZ/G3S support access sizes of 8/16/32
bits, replace writel()/readl() on these registers with writeb()/readb().
This should allow us to use the same code on both SoCs w/o any issues.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On RZ/G3S different Ethernet pins need to be configured with different
settings (e.g. power-source needs to be set, RGMII TXC and TX_CTL pins
need output-enable). Adjust the driver to allow specifying pin
configuration for pinmux groups. With this, DT settings like the
following are taken into account by the driver:
eth0_pins: eth0 {
tx_ctl {
pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>; /* ET0_TX_CTL */
power-source = <1800>;
output-enable;
drive-strength-microamp = <5200>;
};
};
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Move arg and index in the main block of the function as they are used by
more than one case block of switch-case (3 out of 4 for arg, 2 out of 4
for index). In this way some lines of code are removed.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add pinctrl data for ExynosAutov920 SoC.
It has a newly applied pinctrl register layer for ExynosAuto series.
Pinctrl data for ExynosAutoV920 SoC.
- GPA0,GPA1 (10): External wake up interrupt
- GPQ0 (2): SPMI (PMIC I/F)
- GPB0,GPB1,GPB2,GPB3,GPB4,GPB5,GPB6 (47): I2S Audio
- GPH0,GPH1,GPH2,GPH3,GPH4,GPH5,GPH6,GPH8 (49): PCIE, UFS, Ethernet
- GPG0,GPG1,GPG2,GPG3,GPG4,GPG5 (29): General purpose
- GPP0,GPP1,GPP2,GPP3,GPP4,GPP5,GPP6,GPP7,GPP8,GPP9,GPP10 (77): USI
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Link: https://lore.kernel.org/r/20231211114145.106255-3-jaewon02.kim@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
New ExynosAuto series GPIO have a different register structure.
In the existing Exynos series, EINT control register is enumerated after
a specific offset (e.g EXYNOS_GPIO_ECON_OFFSET, EXYNOS_GPIO_EMASK_OFFSET).
However, from ExynosAutov920 SoC, the register that controls EINT belongs
to each GPIO bank, and each GPIO bank has 0x1000 align.
This is a structure to protect the GPIO bank using S2MPU in VM environment,
and will only be applied in ExynosAuto series SoCs.
--------------------------------------------------------------
| Original Exynos | ExynosAuto |
|------------------------------------------------------------|
| 0x0 GPIO_CON | 0x0 GPIO_CON |
| 0x4 GPIO_DAT | 0x4 GPIO_DAT |
| 0x8 GPIO_PUD | 0x8 GPIO_PUD |
| 0xc GPIO_DRV | 0xc GPIO_DRV |
| 0x10 GPIO_CONPDN | 0x10 GPIO_CONPDN |
| 0x14 GPIO_PUDPDN | 0x14 GPIO_PUDPDN |
|----------------------------| 0x18 EINT_CON (per_bank) |
| ... | 0x1c EINT_FLTCON0 (per_bank) |
| ... | 0x20 EINT_FLTCON1 (per_bank) |
| ... | 0x24 EINT_MASK (per_bank) |
| ... | 0x28 EINT_PEND (per_bank) |
|----------------------------|-------------------------------|
| 0x700 EINT_CON (global) | ... |
| 0x800 EINT_FLTCON (global) | ... |
| 0x900 EINT_MASK (global) | ... |
| 0xa00 EINT_FEND (global) | ... |
--------------------------------------------------------------
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Link: https://lore.kernel.org/r/20231211114145.106255-2-jaewon02.kim@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=MQyi
-----END PGP SIGNATURE-----
Merge tag 'pef2256-framer' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Linus Walleij says:
====================
Immutable tag for the PEF2256 framer
* tag 'pef2256-framer' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: Add the Lantiq PEF2256 driver entry
pinctrl: Add support for the Lantic PEF2256 pinmux
net: wan: framer: Add support for the Lantiq PEF2256 framer
dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer
net: wan: Add framer framework support
====================
Link: https://lore.kernel.org/all/CACRpkdYT1J7noFUhObFgfA60XQAfL4rb=knEmWS__TKKtCMh7Q@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
This kind of component can be found in old telecommunication system.
It was used to digital transmission of many simultaneous telephone calls
by time-division multiplexing. Also using HDLC protocol, WAN networks
can be reached through the framer.
This pinmux support handles the pin muxing part (pins RP(A..D) and pins
XP(A..D)) of the PEF2256.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231128132534.258459-5-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the pin-controller found on the gs101 SoC used in
Pixel 6 phones.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-10-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All drivers are converted to use embedded struct pingroup.
Remove unused members from struct group_desc.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211190321.307330-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use grp member embedded in struct group_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin group description.
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211190321.307330-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use grp member embedded in struct group_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin group description.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211190321.307330-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use grp member embedded in struct group_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin group description.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211190321.307330-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use grp member embedded in struct group_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin group description.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211190321.307330-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use grp member embedded in struct group_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin group description.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211190321.307330-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use grp member embedded in struct group_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin group description.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211190321.307330-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use grp member embedded in struct group_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin group description.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211190321.307330-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert drivers to use grp member embedded in struct group_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin group description.
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211190321.307330-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct group_desc is a particular version of the struct pingroup
with associated opaque data. Start switching pin control core and
drivers to use it explicitly.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211190321.307330-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- provide a safer alternative to gpiochip_is_requested()
- convert all existing users
- remove gpiochip_is_requested()
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmVy01QACgkQEacuoBRx
13LcZhAAyJlx3u3snkGjMc8O//2Se5YYhWMuUV37oNjTK5P+ahvq5T+DWSTVtNJz
uJS4rdx4n4TXsbPJKPu8TAyIYhBZGmFAYmfJ4O3IgSrqEieRCp1TfUDI3q+iEHJ2
APdLFF1OqYXpz1lqz/nMyyJaEyRmRrS09gMo9CSPgjh66oHAd+epN5pJTYffJ9yZ
aAxKMIL8CBpLzfNlz4gqwsvObQZOTTM4L7BkH9JaXXnDTAtyQ+HpdlwwwJxTkkzy
YEKrs06/quAoM8Re724l1EmCcgbZzbCkFnTLB/xSFgnV35L2MAvyFEOtd9Jnd8XP
jeWV7hzPYrWKeSKCEOH042ILlyBkNfN/A6MDmF3B/3/D+eM1k/rXfSKA064plMl8
BzSSzb1ylPOPLQp4idlV4qA3WY1AemAQZTOmQmV9C3/OaqdgcXLgyBXaARz2gOM4
u0L+WybwjgmHd/4WuDLtuJ95gaU/YEpURtCGFWaKWQraaSQFDT2EV3nQf/hZ9WgM
2SGqT0sVnmu2K0n0+EW5M4PZyForOwSM9tzqtYmTmal9s1adnL6yx9YH62ON3TV4
Yazi+QpAo+lZ4zfzWV0JODE5ENOn0g9WTmGPLOBfYG7HiqK58WOCz2gwZpqX+xv6
y6JppF7KD5k5xacpMFYHlE92HUyO8VqmTid92Q+97e7JG9xGDG4=
=PlCm
-----END PGP SIGNATURE-----
Merge tag 'gpio-remove-gpiochip_is_requested-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio: remove gpiochip_is_requested()
- provide a safer alternative to gpiochip_is_requested()
- convert all existing users
- remove gpiochip_is_requested()
Use the new gpiochip_dup_line_label() helper to safely retrieve the
descriptor label.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Use the new gpiochip_dup_line_label() helper to safely retrieve the
descriptor label.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Use the new gpiochip_dup_line_label() helper to safely retrieve the
descriptor label.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Use the new gpiochip_dup_line_label() helper to safely retrieve the
descriptor label.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The pin control header provides struct pingroup and PINCTRL_PINGROUP() macro.
Utilize them instead of open coded variants in the driver.
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231204160033.1872569-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It's unclear why it's not a const unsigned int pointer from day 1.
Make the pins member const unsigned int pointer in struct group_desc.
Update necessary APIs.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231204160033.1872569-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We are not going to change pins in the ->set_mux() callback. Mark
the local variable with a const qualifier. While at it, make it
also unsigned.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231204160033.1872569-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If a pin isn't marked as a wake source processing any interrupts is
just going to destroy battery life. The APU may wake up from a hardware
sleep state to process the interrupt but not return control to the OS.
Mask interrupt for all non-wake source pins at suspend. They'll be
re-enabled at resume.
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231203032431.30277-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On j7200, during suspend to ram pinctrl contexts are lost. To save and
restore contexts during suspend/resume, the flag PCS_CONTEXT_LOSS_OFF
shall be set.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231128-j7200-pinctrl-s2r-v1-2-704e7dc24460@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinconf-groups debugfs file dumps each valid configuration item of
all pin groups. Some platforms and devices may have pin groups which
cannot be accessed, according to commit 691bf5d5a7 ("pinctrl: qcom:
Don't allow protected pins to be requested"). Fail for each
configuration item of an invalid pin group by checking the GPIO chip's
valid mask.
The validity of the pin group cannot be checked in the generic pinconf
dump (function "pinconf_generic_dump_one"), as it does not directly
interact with the gpiochip or the pinmux callbacks (which would give it
access to the request callback). Instead, an entry contains the ID and
name of the pingroup with no properties when all items fail.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231128020202.728156-3-mailingradian@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver always registers pin configurations in device tree. This can
cause some inconvenience to users, as pin configurations in the base
device tree cannot be disabled in the device tree overlay, even when the
relevant devices are not used.
Ignore disabled pin configuration nodes in device tree.
Fixes: ec648f6b76 ("pinctrl: starfive: Add pinctrl driver for StarFive SoCs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/fe4c15dcc3074412326b8dc296b0cbccf79c49bf.1701422582.git.namcao@linutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver always registers pin configurations in device tree. This can
cause some inconvenience to users, as pin configurations in the base
device tree cannot be disabled in the device tree overlay, even when the
relevant devices are not used.
Ignore disabled pin configuration nodes in device tree.
Fixes: 447976ab62 ("pinctrl: starfive: Add StarFive JH7110 sys controller driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/fd8bf044799ae50a6291ae150ef87b4f1923cacb.1701422582.git.namcao@linutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pins are allocated from the heap, but in order to pass
them as constant object, we need to use non-constant pointer.
Achieve this by using a temporary variable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231129161459.1002323-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pins are allocated from the heap, but in order to pass
them as constant object, we need to use non-constant pointer.
Achieve this by using a temporary variable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231129161459.1002323-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
of_property_count_u32_elems() might return an error code in some cases.
It's naturally better to assign what it's returned to the err variable
and supply the real code to the upper layer(s). Besides that, it's a
common practice to avoid assignments for the data in cases when we know
that the error condition happened. Refactor the code accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231129161459.1002323-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add support for interrupt affinity to the RZ/G2L GPIO driver,
- Drop unneeded quotes in the RZ/A2 Pin controller DT bindings.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZWnS3wAKCRCKwlD9ZEnx
cJ0nAQCGFX1WnwTM9BmYi2BA0a+EBryoDSAnQC3Rh7Y6xtDm/gEAg8YBr9iHsMd/
GxSx/YUwGoIS9+piwnmNsQdLPaPbKAk=
=PmsO
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.8
- Add support for interrupt affinity to the RZ/G2L GPIO driver,
- Drop unneeded quotes in the RZ/A2 Pin controller DT bindings.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
To support affinity setting for non wake up external gpio interrupt, add
irq_set_affinity callback using irq number from pinctrl driver data.
Before this patch, changing the irq affinity of gpio interrupt is not
possible:
# cat /proc/irq/418/smp_affinity
3ff
# echo 00f > /proc/irq/418/smp_affinity
# cat /proc/irq/418/smp_affinity
3ff
# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3 ...
418: 3631 0 0 0 ...
With this patch applied, it's possible to change irq affinity of gpio
interrupt:
# cat /proc/irq/418/smp_affinity
3ff
# echo 00f > /proc/irq/418/smp_affinity
# cat /proc/irq/418/smp_affinity
00f
# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3 ...
418: 3893 201 181 188 ...
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20231126094618.2545116-1-youngmin.nam@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Implement irq_set_affinity callback so that we can set affinity
for GPIO IRQs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231011195923.67404-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
gpio_to_desc() is declared in linux/gpio.h so there's no need to include
gpiolib.h directly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231115165001.2932350-4-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use macros defined in linux/cleanup.h to automate resource lifetime
control in the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
When ->pin_config_set() is called from the GPIO library (assumed
GpioIo() ACPI resource), the argument can be 1, when, for example,
PullDefault is provided. In such case we supply sane default in
the driver. Move that default assingment to a switch-case, so
it will be consolidated in one place.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There is a piece of code that it being used at least twice.
Factor it out.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
When unpacked, the config value is split to two of different types.
Fix the types accordingly.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use macros defined in linux/cleanup.h to automate resource lifetime
control in the driver.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use lock guards from cleanup.h to simplify locking.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use devm version of gpiochip add function to handle removal for us.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231116223045.274211-1-afd@ti.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add initial pinctrl driver to support pin configuration with pinctrl
framework for X1E80100 SoC.
Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231117093921.31968-3-quic_sibis@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Enable GPIO output after setting the output value to prevent a glitch
when pinctrl driver sets gpio pin to output high and the pin is in
the default state (high->low->high).
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: William A. Kennington III <william@wkennington.com>
Link: https://lore.kernel.org/r/20231115211209.1683449-1-william@wkennington.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the STMicroelectronics STM32 driver, stm32_gpio_direction_output()
ignores the result of pinctrl_gpio_direction_output() for no good reason.
Let's propagate errors from pinctrl_gpio_direction_output() upstream...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/5ce023a8-db0c-13a9-be42-09e3348ca44d@omp.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pin descriptor should be returned if the name has been found in the
descriptor table. Remove the negation in the if statement for accurate
retrieval.
Fixes: e99ce78030 ("pinctrl: realtek: Add common pinctrl driver for Realtek DHC RTD SoCs")
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Link: https://lore.kernel.org/r/20231121091107.5564-1-tychang@realtek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since we don't have runtime PM handles here, we should be using
EXPORT_NS_GPL_DEV_SLEEP_PM_OPS() macro, so that the compiler can
discard it in case CONFIG_PM_SLEEP=n.
Fixes: b10a74b5c0 ("pinctrl: intel: Provide Intel pin control wide PM ops structure")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
MIPS appears to define a RST symbol at a high level, which clashes
with some register naming in the driver. Since there is currently
no case for running this driver on MIPS devices simply cut off the
build of this driver on MIPS.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311071303.JJMAOjy4-lkp@intel.com/
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231115162853.1891940-1-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When in the list_for_each_entry iteration, reload of p->state->settings
with a local setting from old_state will turn the list iteration into an
infinite loop.
The typical symptom when the issue happens, will be a printk message like:
"not freeing pin xx (xxx) as part of deactivating group xxx - it is
already used for some other setting".
This is a compiler-dependent problem, one instance occurred using Clang
version 10.0 on the arm64 architecture with linux version 4.19.
Fixes: 6e5e959dde ("pinctrl: API changes to support multiple states per device")
Signed-off-by: Maria Yu <quic_aiquny@quicinc.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231115102824.23727-1-quic_aiquny@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
TI TPS6594 PMIC has 11 GPIOs which can be used
for different functions.
This patch adds a pinctrl and GPIO drivers in
order to use those functions.
Signed-off-by: Esteban Blanc <eblanc@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231108104124.2818275-1-eblanc@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With "W=1" and "-Wformat-truncation" build options, the kernel test robot
found a possible string truncation warning in pinctrl-s32cc.c, which uses
an 8-byte char array to hold a memory region name "map%u". Since the
maximum number of digits that a u32 value can present is 10, and the "map"
string occupies 3 bytes with a termination '\0', which means the rest 4
bytes cannot fully present the integer "X" that exceeds 4 digits.
Here we check if the number >= 10000, which is the lowest value that
contains more than 4 digits.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311030159.iyUGjNGF-lkp@intel.com/
Signed-off-by: Chester Lin <clin@suse.com>
Link: https://lore.kernel.org/r/20231107141044.24058-1-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The existing code does not verify if the "tentative" index exceeds
the size of the array, causing out of bound read.
Issue identified with kasan.
Check the index before using it.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Fixes: 32c170ff15 ("pinctrl: stm32: set default gpio line names using pin names")
Link: https://lore.kernel.org/r/20231107110520.4449-1-antonio.borneo@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
New generations of Intel platforms will provide better description
of the pin control devices in the ACPI tables. Hence, we may provide
a generic pin control platform driver to cover all of them. Currently
the following Intel SoCs / platforms require this to be functional:
- Lunar Lake
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In order to prepare for a new coming driver export the original
intel_pinctrl_probe() again.
This reverts commit 0dd519e378.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Existing Qualcomm SoCs have the LPASS pin controller slew rate control
in separate register, however this will change with upcoming Qualcomm
SoCs. The slew rate will be part of the main register for pin
configuration, thus second device IO address space is not needed.
Prepare for supporting new SoCs by adding flag customizing the driver
behavior for slew rate.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231013145935.220945-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Setting slew rate for each pin will grow with upcoming Qualcomm SoCs,
so split the code responsible for this into separate function for easier
readability and maintenance.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231013145935.220945-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now that we have completed the transition to standard ACPI helpers for the
entire Intel pinctrl tree, we can detach COMPILE_TEST from ACPI dependency.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add check for the return value of devm_kcalloc() and return the error
if it fails in order to avoid NULL pointer dereference.
Fixes: 32c170ff15 ("pinctrl: stm32: set default gpio line names using pin names")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20231031080807.3600656-1-nichen@iscas.ac.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
New platforms uses a new set of bits to control the wakeirq
delivery to the PDC block.
The intr_wakeup_present_bit indicates if the GPIO supports
wakeirq and intr_wakeup_enable_bit enables wakeirq delivery
to the PDC block.
While the name seems to imply this only enables wakeup events,
it is required to allow interrupts events to the PDC block.
Enable this bit in the irq resource request/free if:
- gpio is in wakeirq map
- has the intr_wakeup_present_bit
- the intr_wakeup_enable_bit is set
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-tlmm-v3-2-0e179c368933@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add driver for the pin controller in Low Power Audio SubSystem (LPASS)
of Qualcomm SM8650 SoC.
Notable differences against SM8550 LPASS pin controller:
1. Additional address space for slew rate thus driver uses
LPI_FLAG_SLEW_RATE_SAME_REG and sets slew rate via different
register.
2. Two new pin mux functions: qca_swr_clk and qca_swr_data
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231027093615.140656-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The function that a pin is muxed to can be read from the top-level
pinctrl-maps debugfs file. However, this only reflects the values that
were specified in device tree, so they will only show deviations from
the hardware default setting. Display the current pinmux setting in the
per-controller pinconf-groups debugfs file along with the rest of the
per-pin configuration settings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20230929122101.466266-1-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Refactor intel_pinctrl_get_soc_data() to drop initial assignment
of the data variable. It's only used in ACPI case and instead
we may always assign it there as the ACPI ID table has the terminator
entry that has driver data set to NULL.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
iWhen ->pin_config_set() is called from the GPIO library (assumed
GpioIo() ACPI resource), the argument can be 1, when, for example,
PullDefault is provided. In such case we supply sane default in
the driver. Move that default assingment to a switch-case, so
it will be consolidated in one place.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
iWhen ->pin_config_set() is called from the GPIO library (assumed
GpioIo() ACPI resource), the argument can be 1, when, for example,
PullDefault is provided. In such case we supply sane default in
the driver. Move that default assingment to a switch-case, so
it will be consolidated in one place.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Family 7 (I2C) supports special bias value, i.e. 910 Ohm.
Enable it for configuring pin.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-17-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-16-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-15-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The main driver conditionally exports the PM ops structure.
Switch this driver to use it instead of customly wrapped one.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
With the help of EXPORT_NS_GPL_DEV_PM_OPS() and
NOIRQ_SYSTEM_SLEEP_PM_OPS() we may convert PM ops functions to become
static. This also takes into account the PM configuration options such
as CONFIG_PM and CONFIG_PM_SLEEP. Hence the first step is to provide
a generic PM ops structure that can be used by drivers directly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231030120734.2831419-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
pinctrl_gpio_*() helpers now have signatures corresponding with those of
the GPIOLIB callbacks. We can drop the wrappers.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_*() helpers now have signatures corresponding with those of
the GPIOLIB callbacks. We can drop the wrappers.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_*() helpers now have signatures corresponding with those of
the GPIOLIB callbacks. We can drop the wrappers.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_*() helpers now have signatures corresponding with those of
the GPIOLIB callbacks. We can drop the wrappers.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_*() helpers now have signatures corresponding with those of
the GPIOLIB callbacks. We can drop the wrappers.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_direction_input() now has the same signature as the
wrapper around it so we can drop them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_direction_input() now has the same signature as the
wrapper around it so we can drop them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_direction_input() now has the same signature as the
wrappers around it so we can drop them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_direction_input() now has the same signature as the
wrappers around it so we can drop them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_direction_input() now has the same signature as the
wrapper around it so we can drop them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_direction_input() now has the same signature as the
wrapper around it so we can drop them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_direction_input() now has the same signature as the
wrapper around it so we can drop them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_direction_input() now has the same signature as the
wrapper around it so we can drop them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_direction_input() now has the same signature as the
wrapper around it so we can drop them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_direction_input() now has the same signature as the
wrapper around it so we can drop it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Modify pinctrl_ready_for_gpio_range() to be in line with public GPIO
helpers and take a pair of GPIO chip & offset as arguments
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Modify gpio_to_pin() to be in line with public GPIO helpers and take
a pair of GPIO chip & offset as arguments.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Modify pinctrl_match_gpio_range() to be in line with public GPIO
helpers and take a pair of GPIO chip & offset as arguments.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Modify pinctrl_get_device_gpio_range() to be in line with public GPIO
helpers and take a pair of GPIO chip & offset as arguments.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Modify pinctrl_gpio_direction() to be in line with public GPIO helpers
and take a pair of GPIO chip & offset as arguments.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_set_config() is no longer used, let's drop the
'_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_direction_output() is no longer used, let's drop
the '_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_direction_input() is no longer used, let's drop the
'_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_free()() is no longer used, let's drop the '_new'
suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_request() is no longer used, let's drop the '_new'
suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_can_use_line() is no longer used, let's drop the
'_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
There are no more users of pinctrl_gpio_set_config() so remove it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
There are no more users of pinctrl_gpio_direction_output() so remove it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
There are no more users of pinctrl_gpio_direction_input() so remove it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
There are no more users of pinctrl_gpio_free() so remove it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
There are no more users of pinctrl_gpio_request() so remove it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
There are no more users of pinctrl_gpio_can_use_line() so remove it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Currently the pinctrl GPIO helpers all take a number from the global
GPIO numberspace - of which we're trying to get rid of as argument.
These helpers are almost universally called from GPIOLIB driver
callbacks which take a pointer to the backing gpio_chip and the
controller-relative offset as arguments.
Let's provide improved variants of these functions that match the
GPIOLIB signatures as the first step in removing the older flavor.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
New drivers:
- Realtek RTD family pin control driver and RTD1619B,
RTD1319D and RTD1315E subdrivers.
- Nuvoton NPCM8xx combined pin control and GPIO driver.
- Amlogic T7 pin control driver.
- Renesas RZ/G3S pin control driver.
Improvements:
- A number of additional UART groups added to the Mediatek
MT7981 driver.
- MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125
and SDM660.
- Extra GPIO banks for the Sunxi H616.
- MLSP I2C6 function support in Qualcomm MSM8226.
- Some __counted_by() annotations for dynamic arrays.
- Ongoing work to make remove() return void.
- LSBC groups and functions in the Renesas R8A7778.
-----BEGIN PGP SIGNATURE-----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=vonG
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No pin control core changes this time.
New drivers:
- Realtek RTD family pin control driver and RTD1619B, RTD1319D and
RTD1315E subdrivers
- Nuvoton NPCM8xx combined pin control and GPIO driver
- Amlogic T7 pin control driver
- Renesas RZ/G3S pin control driver
Improvements:
- A number of additional UART groups added to the Mediatek MT7981
driver
- MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660
- Extra GPIO banks for the Sunxi H616
- MLSP I2C6 function support in Qualcomm MSM8226
- Some __counted_by() annotations for dynamic arrays
- Ongoing work to make remove() return void
- LSBC groups and functions in the Renesas R8A7778"
* tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
pinctrl: Use device_get_match_data()
dt-bindings: pinctrl: qcom,sa8775p-tlmm: add missing wakeup-parent
dt-bindings: pinctrl: nuvoton,npcm845: Add missing additionalProperties on gpio child nodes
dt-bindings: pinctrl: brcm: Ensure all child node properties are documented
pinctrl: renesas: rzn1: Convert to platform remove callback returning void
pinctrl: renesas: rzg2l: Add RZ/G3S support
dt-bindings: pinctrl: renesas: Document RZ/G3S SoC
pinctrl: renesas: rzg2l: Add support for different DS values on different groups
pinctrl: renesas: rzg2l: Move DS and OI to SoC-specific configuration
pinctrl: renesas: rzg2l: Adapt function number for RZ/G3S
pinctrl: renesas: rzg2l: Adapt for different SD/PWPR register offsets
pinctrl: renesas: rzg2l: Index all registers based on port offset
pinctrl: renesas: rzg2l: Add validation of GPIO pin in rzg2l_gpio_request()
pinctrl: renesas: r8a7778: Add LBSC pins, groups, and functions
pinctrl: intel: fetch community only when we need it
pinctrl: cherryview: reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
pinctrl: cherryview: Convert to platform remove callback returning void
pinctrl: sprd-sc9860: Convert to platform remove callback returning void
pinctrl: qcom/msm: Convert to platform remove callback returning void
pinctrl: qcom/lpi: Convert to platform remove callback returning void
...
GPIOLIB core:
- provide interfaces allowing users to retrieve, manage and query the
reference counted GPIO device instead of accessing the private gpio_chip
structure
- replace gpiochip_find() with gpio_device_find()
- remove unused acpi_get_and_request_gpiod()
- improve the ignore_interrupt functionality in GPIO ACPI
- correct notifier return codes in gpiolib-of
- unexport gpiod_set_transitory() as it's unused outside of core GPIO code
- while there are still external users accessing struct gpio_chip, let's
make gpiochip_get_desc() public so that they at least use the preferred
helper
- improve locking for lookup tables
- annotate struct linereq with __counted_by
- improve GPIOLIB docs
- add an OF quirk for LED trigger sources
Driver improvements:
- convert all GPIO drivers with .remove() callbacks to using the new
variant returning void instead of int
- stop accessing the GPIOLIB private structures in gpio-mockup,
i2c-mux-gpio, hte-tegra194, gpio-sim
- use the recommended pattern for autofree variables in gpio-sim
- add support for more models to gpio-loongson
- use a notifier chain to notify other blocks about interrupts in
gpio-eic-sprd instead of looking up GPIO devices on every interrupt
- convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
cache
- don't include GPIOLIB internal headers in drivers which don't need them
- move the ingenic NAND quirk into gpiolib-of
- add an ignore interrupt quirk for Peaq C1010
- drop static GPIO base from gpio-omap, gpio-f7188x
- use the preferred device_get_match_data() function in drivers that still
don't
- refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(), use
cleanup helpers, use dev_err_probe() where it makes sense, fully convert
to using devres and some other minor tweaks
DT bindings:
- add support for a new model to gpio-vf610 and update existing properties
- add support for more loongson models
- add missing support for imx models that are used but undocumented
- convert bindings for Intel IXP4xx to schema
Minor stuff:
- deprecate gpio-mockup in favor of gpio-sim
- include missing headers here and there
- stop using gpiochip_find() in OMAP1 board files
- minor tweaks in gpio-vf610, gpio-hisi
- remove unneeded 'extern' specifiers from headers
-----BEGIN PGP SIGNATURE-----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=1QF8
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We don't have any new drivers. The loongson driver is getting extended
with support for new models. There's a big refactor of gpio-pca953x
and many small improvements to others.
The GPIO code in the kernel has acquired a lot of cruft over the years
as well as many abusers of the API across the kernel tree. This
release cycle we have started a major cleanup and improvement effort
that will most likely span several releases. We have started by
converting external users of struct gpio_chip to accessing the wrapper
around it - struct gpio_device. This is because the latter is
reference counted while the former is removed when the provider is
unbound. We also removed several instances of drivers accessing
private GPIOLIB structures and including the private header from
drivers/gpio/.
To that end you'll see several commits aimed at different subsystems
(acked by relevant maintainers) as well as two merges from the
x86/platform tree.
We'll then rework the locking in GPIOLIB which currently uses a big
spinlock for many different things and could use becoming more
fine-grained, especially as it doesn't even get the locking right.
We'll also use SRCU for protecting the gpio_chip pointer against
in-kernel hot-unplug crashes similar to what we saw triggered from
user-space and fixed with semaphores in gpiolib-cdev. The core GPIOLIB
is still vulnerable to these use-cases. I'm just mentioning the plans
here, this is not part of this PR.
You'll see some new instances of using __free(). We've added a
gpio_device_put cleanup helper similar to the put_device one
introduced by Peter Zijlstra and used it according to the preferred
pattern except where it didn't make sense.
GPIOLIB core:
- provide interfaces allowing users to retrieve, manage and query the
reference counted GPIO device instead of accessing the private
gpio_chip structure
- replace gpiochip_find() with gpio_device_find()
- remove unused acpi_get_and_request_gpiod()
- improve the ignore_interrupt functionality in GPIO ACPI
- correct notifier return codes in gpiolib-of
- unexport gpiod_set_transitory() as it's unused outside of core GPIO
code
- while there are still external users accessing struct gpio_chip,
let's make gpiochip_get_desc() public so that they at least use the
preferred helper
- improve locking for lookup tables
- annotate struct linereq with __counted_by
- improve GPIOLIB docs
- add an OF quirk for LED trigger sources
Driver improvements:
- convert all GPIO drivers with .remove() callbacks to using the new
variant returning void instead of int
- stop accessing the GPIOLIB private structures in gpio-mockup,
i2c-mux-gpio, hte-tegra194, gpio-sim
- use the recommended pattern for autofree variables in gpio-sim
- add support for more models to gpio-loongson
- use a notifier chain to notify other blocks about interrupts in
gpio-eic-sprd instead of looking up GPIO devices on every interrupt
- convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
cache
- don't include GPIOLIB internal headers in drivers which don't need
them
- move the ingenic NAND quirk into gpiolib-of
- add an ignore interrupt quirk for Peaq C1010
- drop static GPIO base from gpio-omap, gpio-f7188x
- use the preferred device_get_match_data() function in drivers that
still don't
- refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(),
use cleanup helpers, use dev_err_probe() where it makes sense,
fully convert to using devres and some other minor tweaks
DT bindings:
- add support for a new model to gpio-vf610 and update existing
properties
- add support for more loongson models
- add missing support for imx models that are used but undocumented
- convert bindings for Intel IXP4xx to schema
Minor stuff:
- deprecate gpio-mockup in favor of gpio-sim
- include missing headers here and there
- stop using gpiochip_find() in OMAP1 board files
- minor tweaks in gpio-vf610, gpio-hisi
- remove unneeded 'extern' specifiers from headers"
* tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (108 commits)
hte: tegra194: add GPIOLIB dependency
hte: tegra194: don't access struct gpio_chip
gpiolib: provide gpio_device_get_base()
i2c: mux: gpio: don't fiddle with GPIOLIB internals
gpiolib: provide gpiod_to_gpio_device()
gpiolib: provide gpio_device_to_device()
gpio: hisi: Fix format specifier
gpiolib: provide gpio_device_find_by_fwnode()
gpio: acpi: remove acpi_get_and_request_gpiod()
gpio: Use device_get_match_data()
gpio: vf610: update comment for i.MX8ULP and i.MX93 legacy compatibles
platform/x86: int3472: Switch to devm_get_gpiod()
platform/x86: int3472: Stop using gpiod_toggle_active_low()
platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper
platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper
gpio: vf610: simplify code by dropping data check
gpio: vf610: add i.MX8ULP of_device_id entry
dt-bindings: gpio: vf610: add i.MX95 compatible
dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93
dt-bindings: gpio: vf610: update gpio-ranges
...
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231009172923.2457844-18-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge ACPI EC driver updates, ACPI sysfs interface updates, misc updates
related to ACPI and changes related to ACPI _UID handling for 6.7-rc1:
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose).
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET).
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko).
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav).
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav).
* acpi-ec:
ACPI: EC: Add quirk for HP 250 G7 Notebook PC
* acpi-sysfs:
ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias()
ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
* acpi-misc:
ACPI: x86: s2idle: Switch to use acpi_evaluate_dsm_typed()
ACPI: PCI: Switch to use acpi_evaluate_dsm_typed()
* acpi-uid:
perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID
ACPI: x86: use acpi_dev_uid_match() for matching _UID
ACPI: utils: use acpi_dev_uid_match() for matching _UID
pinctrl: intel: use acpi_dev_uid_match() for matching _UID
ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID
perf: qcom: use acpi_device_uid() for fetching _UID
ACPI: sysfs: use acpi_device_uid() for fetching _UID
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge "Drop runtime PM support for Baytrail and Lynxpoint pinctrl" (Raag)
* Small improvements here and there in the Intel pin control drivers (Raag)
* Switch to RAII for locking in the Intel core and Cherry View drivers
* Enable non-ACPI enumeration in the Intel Denverton driver
* Use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() in a couple of drivers
* Introduce array_size.h and use in in the Intel pin control drivers
The following is an automated git shortlog grouped by driver:
baytrail:
- Replace kernel.h by what is actually being used
- drop runtime PM support
- fix debounce disable case
broxton:
- Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
cherryview:
- reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
- Convert to platform remove callback returning void
- Simplify code with cleanup helpers
- Avoid duplicated I/O
- Replace kernel.h by what is actually being used
denverton:
- Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
- Enable platform device in the absence of ACPI enumeration
intel:
- fetch community only when we need it
- refine intel_config_set_pull() function
- Replace kernel.h by what is actually being used
- Simplify code with cleanup helpers
lynxpoint:
- Replace kernel.h by what is actually being used
- drop runtime PM support
merrifield:
- Replace kernel.h by what is actually being used
moorefield:
- Replace kernel.h by what is actually being used
-----BEGIN PGP SIGNATURE-----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=o8D/
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.7-1
* Merge "Drop runtime PM support for Baytrail and Lynxpoint pinctrl" (Raag)
* Small improvements here and there in the Intel pin control drivers (Raag)
* Switch to RAII for locking in the Intel core and Cherry View drivers
* Enable non-ACPI enumeration in the Intel Denverton driver
* Use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() in a couple of drivers
* Introduce array_size.h and use in in the Intel pin control drivers
The following is an automated git shortlog grouped by driver:
baytrail:
- Replace kernel.h by what is actually being used
- drop runtime PM support
- fix debounce disable case
broxton:
- Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
cherryview:
- reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
- Convert to platform remove callback returning void
- Simplify code with cleanup helpers
- Avoid duplicated I/O
- Replace kernel.h by what is actually being used
denverton:
- Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
- Enable platform device in the absence of ACPI enumeration
intel:
- fetch community only when we need it
- refine intel_config_set_pull() function
- Replace kernel.h by what is actually being used
- Simplify code with cleanup helpers
lynxpoint:
- Replace kernel.h by what is actually being used
- drop runtime PM support
merrifield:
- Replace kernel.h by what is actually being used
moorefield:
- Replace kernel.h by what is actually being used
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Qualcomm LPASS LPI pin controller driver uses one lock for guarding
Read-Modify-Write code for slew rate registers. However the pin
configuration and muxing registers have exactly the same RMW code but
are not protected.
Pin controller framework does not provide locking here, thus it is
possible to trigger simultaneous change of pin configuration registers
resulting in non-atomic changes.
Protect from concurrent access by re-using the same lock used to cover
the slew rate register. Using the same lock instead of adding second
one will make more sense, once we add support for newer Qualcomm SoC,
where slew rate is configured in the same register as pin
configuration/muxing.
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013145705.219954-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add pin groups for the Local Bus State Controller (LBSC) on R-Car
M1A,
- Add support for the RZ/G3S (R9A08G045) SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZSk0XwAKCRCKwlD9ZEnx
cCykAP9rDQKb83aBYHLBAmlyRKT1+e8Lm1r4QC7KeiC0v8WHQwEAyLILM38KFwyG
vGaiXlp0MfGmA82a0orjdRBiUdyHqAE=
=QFrw
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.7 (take two)
- Add pin groups for the Local Bus State Controller (LBSC) on R-Car
M1A,
- Add support for the RZ/G3S (R9A08G045) SoC,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231009083856.222030-20-u.kleine-koenig@pengutronix.de
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add basic support for RZ/G3S to be able to boot from SD card, have a
running console port, and use GPIOs. RZ/G3S has 82 general-purpose IO
ports. Support for the remaining pin functions (e.g. Ethernet, XSPI)
will be added along with controller-specific support.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-22-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/G3S supports different drive strength values for different power
sources and pin groups (A, B, C). On each group there could be up to 4
drive strength values per power source. Available power sources are
1v8, 2v5, 3v3. Drive strength values are more fine tuned than what was
previously available on the driver thus the necessity of having
micro-amp support. As drive strength and power source values are linked
together the hardware setup for these was moved at the end of
rzg2l_pinctrl_pinconf_set() to ensure proper validation of the new
values.
The drive strength values are expected to be initialized though the
SoC-specific hardware configuration data structure.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-19-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Move drive strength and output impedance values to the SoC-specific
configuration data structure (struct rzg2l_hwcfg). This allows
extending the drive strength support for RZ/G3S. Along with this the DS
values were converted to uA for simple integration with RZ/G3S support.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-18-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On RZ/G3S PFC register allow setting 8 functions for individual ports
(function1 to function8). For function1 the register need to be
configured with 0, for function8 the register need to be configured with
7. We cannot use zero based addressing when requesting functions from
different code places as the documentation
(RZG3S_pinfunction_List_r1.0.xlsx) states explicitly that function0 is
GPIO.
Add a new member to struct rzg2l_hwcfg that will keep the offset that
needs to be substracted before applying a value to a PFC register.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-17-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
SD, PWPR power registers have different offsets b/w RZ/G2L and RZ/G3S.
Add a per SoC configuration data structure that is initialized with the
proper register offsets for individual SoCs. The rzg2l_hwcfg structure
will be extended further in later commits.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-16-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
To get the address that needs to be read/written for specific port
functionalities, the P(), PM(), PMC(), PFC(), PIN(), IOLH() IEN(),
ISEL() macros are used. Some of these macros receive as argument the
hardware port identifier, some the hardware port offset address (e.g.
ISEL() received port identifier, IOLH() received port offset address).
This makes it hard to extend the current driver for SoCs where port
identifiers are not contiguous in the memory map of the pin controller.
This is the case for the RZ/G3S pin controller where ports are mapped as
follows:
port offset port identifier
----------- ---------------
0x20 P0
0x21 P5
0x22 P6
0x23 P11
0x24 P12
0x25 P13
0x26 P14
0x27 P15
0x28 P16
0x29 P17
0x2a P18
0x30 P1
0x31 P2
0x32 P3
0x33 P4
0x34 P7
0x35 P8
0x36 P8
0x37 P10
To make this achievable, change all the above macros used to get the
address of a port register for a specific port functionality based on
the port hardware address. Summarized, all the above macros will get as
argument the port offset address listed in the above table.
With this RZG2L_SINGLE_PIN_GET_PORT_OFFSET(),
RZG2L_PIN_ID_TO_PORT_OFFSET() and RZG2L_GPIO_PORT_GET_INDEX() were
replaced by RZG2L_PIN_CFG_TO_PORT_OFFSET(); RZG2L_SINGLE_PIN_GET_CFGS()
and RZG2L_GPIO_PORT_GET_CFGS() were replaced by RZG2L_PIN_CFG_TO_CAPS().
Also rzg2l_pinctrl_set_pfc_mode() does not need the port argument
anymore. Also rzg2l_gpio_direction_input() and
rzg2l_gpio_direction_output() do not need to translate port and bit
locally as this can be done by rzg2l_gpio_set_direction().
To use the same naming for port, bit/pin, and register offset, replace
the port_offset variable names in different places by variables named
off. There is no longer a need to initialize cfg and bit in different
code places.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230929053915.1530607-15-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Validate the GPIO pin request in the rzg2l_gpio_request() callback using
the rzg2l_validate_gpio_pin() function. This stops any accidental usage
of GPIO pins which are not supported by the SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230925154548.27048-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable pin muxing (eg. programmable function), so that the RZ/N1 GPIO
pins will be configured as specified by the pinmux in the DTS.
This used to be enabled implicitly via CONFIG_GENERIC_PINMUX_FUNCTIONS,
however that was removed, since the RZ/N1 driver does not call any of
the generic pinmux functions.
Fixes: 1308fb4e4e ("pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}")
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231004200008.1306798-1-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We check community features only in case PIN_CONFIG_BIAS_PULL_DOWN while
setting/getting pad termination. No need to fetch the community otherwise.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We have a couple of pinconfig cases inside the braces which are meant for
PIN_CONFIG_BIAS_HIGH_IMPEDANCE case. Although it is valid C, it makes the
code less readable and prone to misinterpretation. Limit the braces to
PIN_CONFIG_BIAS_HIGH_IMPEDANCE case to avoid this.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
To convert the sprd-sc9860 driver, make sprd_pinctrl_remove()
return void (instead of zero) and use .remove_new as callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009162510.335208-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
To convert all those qcom pinctrl drivers, make msm_pinctrl_remove()
return void (instead of zero) and use .remove_new in all drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009162510.335208-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
To convert all those qcom pinctrl drivers, make msm_pinctrl_remove()
return void (instead of zero) and use .remove_new in all drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009162510.335208-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-21-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-18-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-17-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20231009083856.222030-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Link: https://lore.kernel.org/r/20231009083856.222030-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231009083856.222030-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
ti_iodelay_remove() is only called after ti_iodelay_probe() completed
successfully. In this case platform_set_drvdata() was called with a
non-NULL argument and so platform_get_drvdata() won't return NULL.
Simplify by removing the if block with the always false condition.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pcs_remove() is only called after pcs_probe() completed successfully. In
this case platform_set_drvdata() was called with a non-NULL argument and
so platform_get_drvdata() won't return NULL.
Simplify by removing the if block with the always false condition.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver core has no handling for errors returned by the .remove()
callback. The only action on error is a dev_warn() with generic error
message that the returned value is returned.
Replace it by a more specific and useful message. Then returning zero is
the right thing to do, the only effect is to suppress the core's
warning.
This prepares the driver for the conversion to .remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some platforms unfortunately have their SPI mode selection bits
strapped incorrectly (such as being configured for passthrough mode
when master mode is in fact the only useful configuration for it) and
thus require correction in software. Add the SPI mode bits to the
GPIO passthrough bits as the exceptions to the read-only rule for the
hardware strap register so that the pinctrl subsystem can be used for
such corrections.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20231005030849.11352-2-zev@bewilderbeest.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The 'fsl,mxs-gpio' property is not documented in gpio-mxs.yaml, but
the imx23 and imx28 dtsi describe the gpios as:
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
This gives schema warnings like:
imx28-cfa10037.dtb: pinctrl@80018000: gpio@0:compatible: ['fsl,imx28-gpio', 'fsl,mxs-gpio'] is too long
from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml#
"fsl,mxs-gpio" is only used inside pinctrl-mxs, but can be removed if
the compatible check is done against fsl,imx23-gpio and fsl,imx28-gpio.
Introduce is_mxs_gpio() and remove the need for "fsl,mxs-gpio".
Tested on a imx28-evk.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20230928134321.438547-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add struct mcp23s08_info and simplify probe()/mcp23s08_spi_regmap_init() by
replacing match data 'type' with 'struct mcp23s08_info'.
While at it, replace 'dev_err()'->'dev_err_probe()' and drop printing
'type' in error path for i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231001150113.7752-4-biju.das.jz@bp.renesas.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Simpilfy probe() by replacing device_get_match_data() and ID lookup for
retrieving match data by spi_get_device_match_data().
While at it, replace data type of variable type from 'int'->'unsigned int'
and declare variables following a reverse christmas tree order.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231001150113.7752-3-biju.das.jz@bp.renesas.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver has OF match table, still it uses ID lookup table for
retrieving match data. Currently the driver is working on the
assumption that a I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using of_device_match_data() if the devices are registered via OF.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231001150113.7752-2-biju.das.jz@bp.renesas.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Past versions of this driver have manually calculated base values for
both the pinctrl numberspace and the global GPIO numberspace, giving
both the same values. This was necessary for the global GPIO
numberspace, since its values need to be unique system-wide. However, it
was not necessary for the pinctrl numberspace, since its values only
need to be unique for a single instance of the pinctrl device. It was
just convenient to use the same values for both spaces.
Right now those calculations are only used for the pinctrl numberspace,
since GPIO numberspace bases are selected by the GPIO subsystem.
Therefore, those calculations are unnecessary.
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20231006125557.212681-5-m.majewski2@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Selecting it statically is deprecated and results in a warning while
booting the system:
gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20231006125557.212681-4-m.majewski2@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This is preferable since we can read the base in the global GPIO
numberspace from the chip instead of needing to select it ourselves.
Past versions could not do this, since they needed to add all the ranges
before enabling the pinctrl subsystem, which was done before registering
the GPIO chip. However, right now we enable the pinctrl subsystem after
registering the chip and so this became possible.
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20231006125557.212681-3-m.majewski2@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
dev_pinctrl_register function immediately enables the pinctrl subsystem,
which is unpreferable in general, since drivers might be unable to
handle calls immediately. Hence devm_pinctrl_register_and_init, which
does not call pinctrl_enable, is preferred.
In case of our driver using the old function does not seem to be
problematic for now, but will become an issue when we postpone parts of
pinctrl initialization in a future commit, and it is a good idea to move
off a deprecated-ish function anyway.
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20231006125557.212681-2-m.majewski2@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct
exynos_muxed_weint_data. Additionally, since the element count member
must be set before accessing the annotated flexible array member, move
its initialization earlier.
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231006201707.work.405-kees@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
These pin definitions are helpful to have when working with the
driver in the future, so they are in a sense a bit like
documentation. They could be commented out as well, but why.
This should fix these build warnings:
drivers/pinctrl/realtek/pinctrl-rtd1315e.c:231:35: warning:
'rtd1315e_boot_sel_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1315e.c:231:35: warning:
'rtd1315e_reset_n_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1315e.c:231:35: warning:
'rtd1315e_scan_switch_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1315e.c:231:35: warning:
'rtd1315e_testmode_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1315e.c:231:35: warning:
'rtd1315e_wd_rset_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1319d.c:237:35: warning:
'rtd1319d_boot_sel_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1319d.c:237:35: warning:
'rtd1319d_reset_n_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1319d.c:237:35: warning:
'rtd1319d_scan_switch_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1319d.c:237:35: warning:
'rtd1319d_testmode_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1319d.c:237:35: warning:
'rtd1319d_wd_rset_pins' defined but not used [-Wunused-const-variable=]
Cc: Tzuyi Chang <tychang@realtek.com>
Link: https://lore.kernel.org/oe-kbuild-all/202309270313.mBEc9o1A-lkp@intel.com/
Link: https://lore.kernel.org/oe-kbuild-all/202309270448.7Aen3Sgx-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231006-fix-realtek-warnings-v1-1-09af253312ba@linaro.org
There are several issues in the probe function:
1) of_iomap() return NULL on error but the code checks for error
pointers.
2) pinctrl_register() is the reverse. It returns error pointers
but the code checks for NULL.
3) The error paths need to call iounmap(data->base) before returning
to avoid a resource leak.
Fixes: e99ce78030 ("pinctrl: realtek: Add common pinctrl driver for Realtek DHC RTD SoCs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/590b337a-13ce-4391-a09d-d2b06fbc912d@moroto.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use macros defined in linux/cleanup.h to automate resource lifetime
control in the driver.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In some cases we already read the value from the register followed
by a reading of it again for other purposes, but the both reads
are under the lock and bits we are insterested in are not going
to change (they are not volatile from HW perspective). Hence, no
need to read the same register twice.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
As Krzysztof pointed out the better is to use MODULE_DEVICE_TABLE()
as it will be consistent with the content of the real ID table of
the platform devices.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
As Krzysztof pointed out the better is to use MODULE_DEVICE_TABLE()
as it will be consistent with the content of the real ID table of
the platform devices.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The kernel.h is a mess of unrelated things and we only used it
as a proxy to array_size.h, hence switch from former to the latter.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The kernel.h is a mess of unrelated things and we only used it
as a proxy to array_size.h, hence switch from former to the latter.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The kernel.h is a mess of unrelated things and we only used it
as a proxy to array_size.h, hence switch from former to the latter.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The kernel.h is a mess of unrelated things and we only used it
as a proxy to array_size.h, hence switch from former to the latter.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The kernel.h is a mess of unrelated things and we only used it
as a proxy to array_size.h, hence switch from former to the latter.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since Lynxpoint pinctrl device is not attached to acpi_lpss_pm_domain,
runtime PM serves no purpose here. Drop it and switch to pm_sleep_ptr()
as now we only have resume handle in place.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20231003114036.27674-3-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since Baytrail pinctrl device is not attached to acpi_lpss_pm_domain,
runtime PM serves no purpose here. Drop it and switch to pm_sleep_ptr()
as now we only have suspend and resume handles in place.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20231003114036.27674-2-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Improve intel_config_set_pull() implementation in Intel pinctrl driver by:
- Reducing scope of spinlock by moving unneeded operations out of it.
- Utilizing temporary variables for common operations.
- Limiting IO operations to positive cases.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The kernel.h is a mess of unrelated things and we only used it
as a proxy to array_size.h, hence switch from former to the latter.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The kernel.h is a mess of unrelated things and we only used it
as a proxy to array_size.h, hence switch from former to the latter.
While at it, group and sort the headers where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This is to cater the need for non-ACPI system whereby
a platform device has to be created in order to bind
with the Denverton pinctrl platform driver.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct uniphier_pinctrl_reg_region.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175006.work.421-kees@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These errors are not quite clear without also logging they device tree node
being parsed, especially when the pinmux node has lots of subnodes. Adding
the node name helps a lot in finding the node that triggers the error.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230926103938.334055-1-luca.ceresoli@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pin <-> wakeirq mappings to allow for waking up the AP from sleep
through MPM-connected pins.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230923131432.21721-3-matti.lehtimaki@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pin <-> wakeirq mappings to allow for waking up the AP from sleep
through MPM-connected pins.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230923131432.21721-2-matti.lehtimaki@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On GPIO22 and GPIO23 there is another I2C bus. Add the function for it.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230922-msm8226-i2c6-v2-2-3fb55c47a084@z3ntu.xyz
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mtk_pinmux_set_mux() doesn't check the result of mtk_hw_set_value()
despite it may return a negative error code. Propagate error code
to caller functions.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Link: https://lore.kernel.org/r/20230922135926.3653428-2-k.yankevich@omp.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mtk_pmx_set_mux() doesn't check the result of mtk_hw_set_value()
despite it may return negative error code. Propagate error code
to caller functions.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Link: https://lore.kernel.org/r/20230922135926.3653428-1-k.yankevich@omp.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use macros defined in linux/cleanup.h to automate resource lifetime
control in the driver.
While at it, unify the variables and approach in intel_gpio_irq_*().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
We usually do reverse order of enable() for disable(). Currently, the
ordering of irq_chip_disable_parent() is not correct in
rzg2l_gpio_irq_disable(). Fix the incorrect order.
Fixes: db2e5f21a4 ("pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230918123355.262115-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a new pinctrl driver for Amlogic T7 SoCs which share
the same register layout as the previous Amlogic S4.
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20230922094342.637251-3-huqiang.qin@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The code in find_pinctrl() takes a mutex and traverses a list of pinctrl
structures. Later the caller bumps up reference count on the found
structure. Such pattern is not safe as pinctrl that was found may get
deleted before the caller gets around to increasing the reference count.
Fix this by taking the reference count in find_pinctrl(), while it still
holds the mutex.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/ZQs1RgTKg6VJqmPs@google.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some SoCs from the H616 family (such as the T507) have the same die but
more output pins that are used for additional peripherals. The T507 SoC
don't have a built-in multiphy like the AC200 or AC300 connected to the
bank A. With the T507 these pins can be freely used for any other application.
This patch adds the missing muxes on banks A, D and E.
Thanks to Samuel and Andre for the review.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230916081615.4237-1-iuncuim@gmail.com
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
AST2600 USB2AHP (USB PortA: PCIe EHCI to PHY) function needs to set the
register SCUC20[16]. Set it to enable the PCIe EHCI device on PCIe bus.
Besides, also add USB2AHP signal expressions into pin declarations.
Signed-off-by: Joe Wang <joe_wang@aspeedtech.com>
Link: https://lore.kernel.org/r/20230920103332.274151-1-joe_wang@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The RTD SoCs share a similar design for pinmux and pinconfig.
This common pinctrl driver supports different variants within the RTD
SoCs.
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Link: https://lore.kernel.org/r/20230919101117.4097-2-tychang@realtek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We have build errors due to missing dependency on OF.
Add the dependency and do it the same way for all three
Nuvotons while we are at it.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230913-novoton-kconfig-v1-1-1c2dff14c0d2@linaro.org
We don't need to update debounce pulse value in case debounce is to be
disabled. Break such a case where arg value is zero.
Fixes: 4cfff5b7af ("pinctrl: baytrail: consolidate common mask operation")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/d164d471-5432-4c3c-afdb-33dc8f53d043@moroto.mountain/
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Detailed error message is already printed at the end of the function, so
drop redundant one a few lines earlier.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230909063613.2867-2-jernej.skrabec@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Simpilfy probe() by replacing of_device_get_match_data() and ID lookup for
retrieving match data by i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230909110459.12453-1-biju.das.jz@bp.renesas.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add system pm ops to save and restore pinctrl registers
when suspending and resuming the driver, respectively.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230905122105.117000-3-hal.feng@starfivetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The issue was found when we enabled CONFIG_PM and tested edge events using
libgpiod.
> # gpiomon -r gpiochip0 55
> gpiomon: error waiting for events: Permission denied
`gpiomon` will call irq_chip_pm_get() and then call pm_runtime_resume_and_get()
if (IS_ENABLED(CONFIG_PM) && sfp->gc.irq.domain->pm_dev).
pm_runtime_resume_and_get() will fail if the runtime pm of pinctrl device
is disabled.
As we expect the pinctrl driver can be always working and never suspend
during runtime, unset sfp->gc.irq.domain->pm_dev to make sure
pm_runtime_resume_and_get() won't be called when setting irq.
Fixes: 447976ab62 ("pinctrl: starfive: Add StarFive JH7110 sys controller driver")
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230905122105.117000-2-hal.feng@starfivetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpiochip_get_desc() now lives in linux/gpio/driver.h and there is no
longer any need to include GPIOLIB's private header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
gpiod_is_active_low() is defined in linux/gpio/consumer.h. It's only
because we're pulling in the gpiolib.h private header that we get this
declaration implicitly but let's fix it as that is going away soon.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Simpilfy probe() by replacing device_get_match_data() and ID lookup for
retrieving match data by i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230902082225.8777-1-biju.das.jz@bp.renesas.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Write into 'pctrl->gpio_bank' happens before the check for GPIO index
validity, so out of bounds write may happen.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a1d1e0e3d8 ("pinctrl: nuvoton: Add driver for WPCM450")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230825101532.6624-1-m.kobuk@ispras.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pinctrl and GPIO controller driver support to Arbel BMC NPCM8XX SoC.
Arbel BMC NPCM8XX pinctrl driver based on Poleg NPCM7XX, except the
pin mux mapping difference the NPCM8XX GPIO supports adjust debounce
period time.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20230828140849.21724-3-tmaimon77@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the pinconf_generic_dt_node_to_map_all() helper instead of
open-coding the same operation, to avoid having to provide custom
pinctrl_ops.dt_node_to_map() callbacks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/81e9ab48f78d63153b23a163b3349b3059d2b7fc.1692871558.git.geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These are always used in pcs_probe().
While I was here, I also changed 'unsigned' in the same line to
'unsigned int' to address the checkpatch warnings:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20230824064508.968142-1-masahiroy@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support.
- AMLogic C3 SoC pin control support.
- Texas Instruments AM654 SoC pin control support.
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System)
pin control support.
- Qualcomm PMX75 and PM7550BA (Power Management) pin control
support.
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support.
- DROP the Oxnas driver as there is not enough of community
interest to keep carrying this ARM(11) port.
Enhancements:
- Bias control in the MT7986 pin control driver.
- Misc device tree binding enhancements such as the Broadcom
11351 being converted to YAML.
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use.
- Clean up some SPDX headers.
- Handle non-unique devicetree subnode names in two Renesas
drivers.
-----BEGIN PGP SIGNATURE-----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=AMCy
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have some patches to DTS[I] files in arm and arm64 as well, that
were merged here as DT headers were being changed.
The most interesting stuff is the Intel Tangier chip support and
AMLogic C3 in my opinion.
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support
- AMLogic C3 SoC pin control support
- Texas Instruments AM654 SoC pin control support
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
control support
- Qualcomm PMX75 and PM7550BA (Power Management) pin control support
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support
- DROP the Oxnas driver as there is not enough of community interest
to keep carrying this ARM(11) port
Enhancements:
- Bias control in the MT7986 pin control driver
- Misc device tree binding enhancements such as the Broadcom 11351
being converted to YAML
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use
- Clean up some SPDX headers
- Handle non-unique devicetree subnode names in two Renesas drivers"
* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mlxbf3: Remove gpio_disable_free()
pinctrl: use capital "OR" for multiple licenses in SPDX
dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
pinctrl: cherryview: fix address_space_handler() argument
pinctrl: intel: consolidate ACPI dependency
pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mediatek: assign functions to configure pin bias on MT7986
pinctrl: mediatek: fix pull_type data for MT7981
dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
dt-bindings: pinctrl: Drop 'phandle' properties
pinctrl: lynxpoint: Make use of pm_ptr()
pinctrl: baytrail: Make use of pm_ptr()
pinctrl: intel: Switch to use exported namespace
pinctrl: lynxpoint: reuse common functions from pinctrl-intel
pinctrl: cherryview: reuse common functions from pinctrl-intel
...
There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:
- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.
- QuadSPI SPI support for Allwinner sun6i.
- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp6KQACgkQJNaLcl1U
h9BHMQf+Jtvdx8cIhzVyMRBUfmeEzpi5oGiurPiQVBM5RsO0APULbxdy1kBsQ4FO
5Omv7juG323XiZc1hrtBPNoZfnn83pjjMFZZZYse8Ntd6e5iesHzxRQJaml8NPBA
0ktJQiB6Eh9WTjYT6LgN8T5j4SLT5F2jiDinBPUj1vHGSy0YXGWpYFq9QIkXwMbE
8n0jyf5+Neccs4CIiPR3ap8NjIyPE/b761acRFkOmF+iiHWmnFrQYNS4CSxR2kOC
yL0SlzuoG2feYSfiHyCKIPC0MGT5/Vn1tzNqoEam6B6Ecql24W8BMdU0/No3yKPT
22LIfRWR9Wb5usFxjDxIs9YaWD4abA==
=oj/i
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:
- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.
- QuadSPI SPI support for Allwinner sun6i.
- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI"
* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
spi: spi-sn-f-ospi: switch to use modern name
spi: sifive: switch to use modern name
spi: sh: switch to use modern name
spi: sh-sci: switch to use modern name
spi: sh-msiof: switch to use modern name
spi: sh-hspi: switch to use modern name
spi: sc18is602: switch to use modern name
spi: s3c64xx: switch to use modern name
spi: rzv2m-csi: switch to use devm_spi_alloc_host()
spi: rspi: switch to use spi_alloc_host()
spi: rockchip: switch to use modern name
spi: rockchip-sfc: switch to use modern name
spi: realtek-rtl: switch to use devm_spi_alloc_host()
spi: rb4xx: switch to use modern name
spi: qup: switch to use modern name
spi: spi-qcom-qspi: switch to use modern name
spi: pxa2xx: switch to use modern name
spi: ppc4xx: switch to use modern name
spi: spl022: switch to use modern name
...
* New library driver for Intel MID to deduplicate code (Raag Jadav)
* Reuse common functions from pinctrl-intel to reduce the code (Raag Jadav)
* Move most of the exported functions to the PINCTRL_INTEL namespace
* Make use of pm_ptr() in Bay Trail and Lynxpoint drivers
* Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper and use it in a few drivers
* Consolidata ACPI dependency in Kconfig (Raag Jadav)
* Fix address_space_handler() argument in Cherryview driver (Raag Jadav)
* Optinmize byt_pin_config_set() to avoid IO in error cases (Raag Jadav)
The following is an automated git shortlog grouped by driver:
at91:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
baytrail:
- Make use of pm_ptr()
- reuse common functions from pinctrl-intel
- consolidate common mask operation
cherryview:
- fix address_space_handler() argument
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
- reuse common functions from pinctrl-intel
intel:
- consolidate ACPI dependency
- Switch to use exported namespace
- export common pinctrl functions
lynxpoint:
- Make use of pm_ptr()
- reuse common functions from pinctrl-intel
Merge patch series:
- Merge patch series "Introduce Intel Tangier pinctrl driver"
- Merge patch series "Reuse common functions from pinctrl-intel"
merrifield:
- Adapt to Intel Tangier driver
moorefield:
- Adapt to Intel Tangier driver
mvebu:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm:
- Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
renesas:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
tangier:
- Introduce Intel Tangier driver
tegra:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmTnJ9gACgkQb7wzTHR8
rCh68A/+I+5GVamgfQV6ef9diFgTJQ1AVqarb0noeoKwwwv+LZRmUOdlS6ZAzuK8
4LGVboIfrUcJ7pz0hiPbFZj4DvNnODTAPl+ZnaQd9n7H709sPvhlay1sK91TR1SB
IjE7kmYrygswL7ufbDuhXEay4VGEKeR1pylbNI6Bi17kp7odio50O5o+ORvc/c5c
Ho49EtMLraAxtTw1ZiojJ+shv27UM/Zit+EkddJOG+z6ORvlypymCiNToMgdxVfp
rEqshWfJyjW2ucrF+KXAAUEKSTTxATKj+7gJO8l4r0lTZ8wEHo0Kh72JYVF4alnn
G61ZjKjNwtGzQy7BkIzcY6gKByF297JW4pxeetBr2v0gRpwjwAqVfE9i2MoNB/Su
W+yTEaz5TeAwoQ8HRgpaxYb503Y6bOnXETvn40QadewBqOr4G0/pxrTEqtDN6KzF
rZIqs9/CpNl8HAH2HSW5qkxTC3efQAdHG6Df76Vu9WSzPRzMqJedrR4RTJoYd/1k
MBHbN7Ur9/Bu93jwG71nbcLEz0DTvsmaM9N1ArTqc/GDZVf4ptUMGYtFsFcURt0C
vj4cb+NaMI49VEAcJiWB7u6EqiWLDP7AhNbm9so4g7NGi0vVrrxZV7VCfsKC6Xmg
XorgPN7hB9PxJ5K6xVWZi5wrIG3vcheF8U8v4wcj4IfkIny9ya0=
=Jpna
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.6-1
* New library driver for Intel MID to deduplicate code (Raag Jadav)
* Reuse common functions from pinctrl-intel to reduce the code (Raag Jadav)
* Move most of the exported functions to the PINCTRL_INTEL namespace
* Make use of pm_ptr() in Bay Trail and Lynxpoint drivers
* Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper and use it in a few drivers
* Consolidata ACPI dependency in Kconfig (Raag Jadav)
* Fix address_space_handler() argument in Cherryview driver (Raag Jadav)
* Optinmize byt_pin_config_set() to avoid IO in error cases (Raag Jadav)
The following is an automated git shortlog grouped by driver:
at91:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
baytrail:
- Make use of pm_ptr()
- reuse common functions from pinctrl-intel
- consolidate common mask operation
cherryview:
- fix address_space_handler() argument
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
- reuse common functions from pinctrl-intel
intel:
- consolidate ACPI dependency
- Switch to use exported namespace
- export common pinctrl functions
lynxpoint:
- Make use of pm_ptr()
- reuse common functions from pinctrl-intel
Merge patch series:
- Merge patch series "Introduce Intel Tangier pinctrl driver"
- Merge patch series "Reuse common functions from pinctrl-intel"
merrifield:
- Adapt to Intel Tangier driver
moorefield:
- Adapt to Intel Tangier driver
mvebu:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm:
- Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
renesas:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
tangier:
- Introduce Intel Tangier driver
tegra:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove support for gpio_disable_free() because it is called when the libgpiod
command "gpioset" is invoked. This gives the GPIO control back to hardware which
cancels out the effort to set the GPIO value.
Reminder of the code flow to change a GPIO value from software:
1) All GPIOs are controlled by hardware by default
2) To change the GPIO value, enable software control via a mux.
3) Once software has control over the GPIO pin, the gpio-mlxbf3 driver
will be able to change the direction and value of the GPIO.
When the user runs "gpioset gpiochip0 0=0" for example, the gpio
pin value should change from 1 to 0. In this case, mlxbf3_gpio_request_enable()
is called via gpiochip_generic_request(). The latter switches GPIO control from
hardware to software. Then the GPIO value is changed from 1 to 0. However,
gpio_disable_free() is also called which changes control back to hardware
which changes the GPIO value back to 1.
Fixes: d11f932808 ("pinctrl: mlxbf3: Add pinctrl driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230818164314.8505-2-asmaa@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Correct also the placement of SPDX identifier in pinctrl-meson-axg
files:
WARNING: Misplaced SPDX-License-Identifier tag - use line 1 instead
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823085546.116494-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
First argument of acpi_*_address_space_handler() APIs is acpi_handle of
the device, which is incorrectly passed in driver ->remove() path here.
Fix it by passing the appropriate argument and while at it, make both
API calls consistent using ACPI_HANDLE().
Fixes: a0b028597d ("pinctrl: cherryview: Add support for GMMR GPIO opregion")
Cc: stable@vger.kernel.org
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since all the Intel specific platform drivers depend on ACPI, we can
consolidate their config dependency.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.
With that, make sure the PM ops are used only in CONFIG_PM_SLEEP=y
case by wrapping them in pm_sleep_ptr() macro.
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230717172821.62827-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230717172821.62827-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230717172821.62827-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.
With that switch pm_ptr() to pm_sleep_ptr() as the above
mentioned callbacks are only used for system sleep.
The use of the pm_sleep_ptr() macro allows the compiler
to always see the dev_pm_ops structure and related functions,
while still allowing the unused code to be removed, without
the need for the __maybe_unused markings.
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230717172821.62827-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230717172821.62827-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Shubhra reports that their laptop is heating up over s2idle. Even though
it's getting into the deepest state, it appears to be having spurious
wakeup events.
While debugging a tangential issue with the RTC Carsten reports that recent
6.1.y based kernel face a similar problem.
Looking at acpidump and GPIO register comparisons these spurious wakeup
events are from the GPIO associated with the I2C touchpad on both laptops
and occur even when the touchpad is not marked as a wake source by the
kernel.
This means that the boot firmware has programmed these bits and because
Linux didn't touch them lead to spurious wakeup events from that GPIO.
To fix this issue, restore most of the code that previously would clear all
the bits associated with wakeup sources. This will allow the kernel to only
program the wake up sources that are necessary.
This is similar to what was done previously; but only the wake bits are
cleared by default instead of interrupts and wake bits. If any other
problems are reported then it may make sense to clear interrupts again too.
Cc: Sachi King <nakato@nakato.io>
Cc: stable@vger.kernel.org
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes: 65f6c7c91c ("pinctrl: amd: Revert "pinctrl: amd: disable and mask interrupts on probe"")
Reported-by: Shubhra Prakash Nandi <email2shubhra@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217754
Reported-by: Carsten Hatger <xmb8dsv4@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217626#c28
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230818144850.1439-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Fix race conditions in pinctrl group and function creation/remove
calls on the RZ/G2L, RZ/V2M, and RZ/A2 SoC families.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZN9QZAAKCRCKwlD9ZEnx
cPJZAQDl9k+iwv92cBngQ+wpEnhCaswVKukGm6PNbTGkcWzDsAD8CVnUfyngDtun
7Lz0rWdc5klfVVhHXYW71ylQDKFvZAc=
=HQNf
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-fixes-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into fixes
pinctrl: renesas: Fixes for v6.5 (take two)
- Fix race conditions in pinctrl group and function creation/remove
calls on the RZ/G2L, RZ/V2M, and RZ/A2 SoC families.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cleaning up the driver to use pm_ptr() and *_PM_OPS() macros that
make it simpler and allows the compiler to remove those functions
if built without CONFIG_PM and CONFIG_PM_SLEEP support.
The lp_gpio_resume() is also assigned to .thaw and .restore members.
This is not a problem as the function it enables input pins that
had been disabled by firmware and repetion of that doesn't change
the pin configuration, i.e. it is idempotent.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230717172821.62827-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cleaning up the driver to use pm_ptr() and *_PM_OPS() macros that
make it simpler and allows the compiler to remove those functions
if built without CONFIG_PM and CONFIG_PM_SLEEP support.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230717172821.62827-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The pinctrl group and function creation/remove calls expect
caller to take care of locking. Add lock around these functions.
Fixes: b59d0e7827 ("pinctrl: Add RZ/A2 pin and gpio controller")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fix the below random NULL pointer crash during boot by serializing
pinctrl group and function creation/remove calls in
rzv2m_dt_subnode_to_map() with mutex lock.
Crash logs:
pc : __pi_strcmp+0x20/0x140
lr : pinmux_func_name_to_selector+0x68/0xa4
Call trace:
__pi_strcmp+0x20/0x140
pinmux_generic_add_function+0x34/0xcc
rzv2m_dt_subnode_to_map+0x2e4/0x418
rzv2m_dt_node_to_map+0x15c/0x18c
pinctrl_dt_to_map+0x218/0x37c
create_pinctrl+0x70/0x3d8
While at it, add a comment for lock.
Fixes: 92a9b82525 ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fix the below random NULL pointer crash during boot by serializing
pinctrl group and function creation/remove calls in
rzg2l_dt_subnode_to_map() with mutex lock.
Crash log:
pc : __pi_strcmp+0x20/0x140
lr : pinmux_func_name_to_selector+0x68/0xa4
Call trace:
__pi_strcmp+0x20/0x140
pinmux_generic_add_function+0x34/0xcc
rzg2l_dt_subnode_to_map+0x314/0x44c
rzg2l_dt_node_to_map+0x164/0x194
pinctrl_dt_to_map+0x218/0x37c
create_pinctrl+0x70/0x3d8
While at it, add comments for bitmap_lock and lock.
Fixes: c4c4637eb5 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Tested-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
Add a basic pinctrl driver which supports driver strength for the
various pins, gpios, and pinmux for the 2 multi-function pins.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-5-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
We already have a few symbols exported in the namespace.
Let's do the same for others (except PM for now).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Raag Jadav <raag.jadav@intel.com> says:
This series exports common pinctrl functions that are used across
Intel specific platform drivers to PINCTRL_INTEL namespace and
reuses them into Baytrail, Cherryview and Lynxpoint drivers.
This helps reduce their code and memory footprint.
X86 kernels are fairly unikernels such that pinctrl-intel driver is
enabled by most Linux distributions and most Intel specific platform
drivers (inside drivers/pinctrl/intel) depend on it.
The only exception to this is Lynxpoint. But taking into account its
fairly old age, it wouldn't suffer much from pinctrl-intel dependency.
bloat-o-meter:
==============
Intel:
add/remove: 17/10 grow/shrink: 0/0 up/down: 375/-319 (56)
Total: Before=9598, After=9654, chg +0.58%
Baytrail:
add/remove: 1/6 grow/shrink: 0/2 up/down: 41/-441 (-400)
Total: Before=16538, After=16138, chg -2.42%
Cherryview:
add/remove: 1/6 grow/shrink: 2/0 up/down: 90/-272 (-182)
Total: Before=18133, After=17951, chg -1.00%
Lynxpoint:
add/remove: 1/6 grow/shrink: 0/1 up/down: 24/-354 (-330)
Total: Before=7836, After=7506, chg -4.21%
Link: https://lore.kernel.org/r/20230814060311.15945-1-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reuse common functions from pinctrl-intel driver.
While at it, select pinctrl-intel for Intel Lynxpoint driver.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230814060311.15945-5-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reuse common functions from pinctrl-intel driver.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230814060311.15945-4-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reuse common functions from pinctrl-intel driver.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230814060311.15945-3-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Export common pinctrl functions that are used across Intel specific
platform drivers, so that they can be reused.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230814060311.15945-2-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Raag Jadav <raag.jadav@intel.com> says:
Merrifield and Moorefield pinctrl driver implementations are similar
in terms of how they access the hardware. We can consolidate their
pinctrl functionalities into a common library driver.
This patch set introduces:
1. Intel Tangier driver that supports the common pinctrl functionalities
for Merrifield and Moorefield platforms.
2. Intel Tangier adaptation for Merrifield pinctrl driver.
3. Intel Tangier adaptation for Moorefield pinctrl driver.
Tested on Intel Edison platform.
No deviation observed in the contents of below entries before and after
this patchset.
- /proc/interrupts
- /sys/kernel/debug/gpio
- /sys/kernel/debug/pinctrl/*/pins
Link: https://lore.kernel.org/r/20230814054033.12004-1-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Tangier implements the common pinctrl functionalities for
Merrifield and Moorefield platforms.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20230814054033.12004-2-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Consolidate common mask operation outside of switch cases and
limit IO operations to positive cases.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
1. Add support for the SM6115 and SM8350 LPASS (Low Power Audio
SubSystem) TLMM pin controllers.
2. Add bindings for the Qualcomm PMC8180 and PMC8180C PMICs GPIO pin
controllers.
-----BEGIN PGP SIGNATURE-----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=B2ID
-----END PGP SIGNATURE-----
Merge tag 'qcom-pinctrl-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel
Qualcomm pinctrl changes for v6.6
1. Add support for the SM6115 and SM8350 LPASS (Low Power Audio
SubSystem) TLMM pin controllers.
2. Add bindings for the Qualcomm PMC8180 and PMC8180C PMICs GPIO pin
controllers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 pinctrl & gpio.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230814-topic-oxnas-upstream-remove-v3-1-04a0c5cdda52@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SA8775 and newer target have added support for an increased number of
interrupt targets. To implement this change, the intr_target field, which
is used to configure the interrupt target in the interrupt configuration
register is increased from 3 bits to 4 bits.
In accordance to these updates, a new intr_target_width member is
introduced in msm_pingroup structure. This member stores the value of
width of intr_target field in the interrupt configuration register. This
value is used to dynamically calculate and generate mask for setting the
intr_target field. By default, this mask is set to 3 bit wide, to ensure
backward compatibility with the older targets.
Fixes: 4b6b185599 ("pinctrl: qcom: add the tlmm driver sa8775p platforms")
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Ninad Naik <quic_ninanaik@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230809100634.3961-1-quic_ninanaik@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We can have gpiochip_add_data() return -EPROBE_DEFER which will make
us produce the "unable to add GPIO chip" message which is confusing.
Use dev_err_probe() to silence probe deferral messages.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230808180733.2081353-3-florian.fainelli@broadcom.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We can have gpiochip_add_data() return -EPROBE_DEFER which will make us
produce the "unable to add GPIO chip" message which is confusing. Use
dev_err_probe() to silence probe deferral messages.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230808180733.2081353-2-florian.fainelli@broadcom.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the "ti,am654-padconf" compatible to enable the use of wake-up enable
and event bits on K3 SOCs that support the daisychain feature
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230808102207.130177-3-d-gole@ti.com
[Alphabetized the compatible list]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add stm32_pctrl_get_desc_pin_from_gpio function to find a stm32 pin
descriptor which is matching with a gpio.
Most of the time pin number is equal to pin index in array. So the first
part of the function is useful to speed up.
And during gpio bank register, we set default gpio names with pin names.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20230620104349.834687-1-valentin.caron@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since commit ce753ad154 ("platform: finally disallow IRQ0 in
platform_get_irq() and its ilk"), there is no possible for
platform_get_irq() to return 0. Use the return value
from platform_get_irq().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230803094304.733371-1-ruanjinjie@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In atmel_conf_pin_config_dbg_show(), checking atmel_pioctrl->pins[pin_id]
against being NULL doesn't make any sense as it gets derefenced first and
the driver's probe() method immediately returns -ENOMEM when devm_kzalloc()
returns NULL for any atmel_pioctrl->pins[] element anyway, thus failing to
register the device...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/4ab2f59f-45c1-76a2-94da-3331e8ec4e35@omp.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).
Fixes: 0f04a81784 ("pinctrl: mcp23s08: Split to three parts: core, I²C, SPI")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230621100409.1608395-1-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the pin controller block on SM6115's Low Power Island.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230722-topic-6115_lpasstlmm-v2-2-d4883831a858@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support to handle 'output-enable' and 'bias-high-impedance'
configurations.
Using these pinctrl properties observed hang issues with older PMUFW(Xilinx
ZynqMP Platform Management Firmware), hence reverted the patch.
Commit 9989bc33c4 ("Revert "pinctrl: pinctrl-zynqmp: Add support
for output-enable and bias-high-impedance"").
Support for configuring these properties added in PMUFW Configuration Set
version 2.0. When there is a request for these configurations from pinctrl
driver for ZynqMP platform, xilinx firmware driver checks for this version
before configuring these properties to avoid the hang issue and proceeds
further only when firmware version is >=2 otherwise it returns error.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230731095026.3766675-5-sai.krishna.potthuri@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Use the new devm_clk_get_enabled() helper.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZMOrCgAKCRCKwlD9ZEnx
cCz/AQC9R6tDDnUVANXXgDIQgqZU/tOX19mLsnOa+m2e2UsrmwEA+u1HdgXwtXpq
VvjtCN/bG1jJVNDlK1/qKJnytsU+sAc=
=QdlY
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.6
- Use the new devm_clk_get_enabled() helper.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_generic_add_function() doesn't check result of radix_tree_insert()
despite they both may return a negative error code. Linus Walleij said he
has copied the radix tree code from kernel/irq/ where the functions calling
radix_tree_insert() are *void* themselves; I think it makes more sense to
propagate the errors from radix_tree_insert() upstream if we can do that...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230719202253.13469-4-s.shtylyov@omp.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_register_one_pin() doesn't check the result of radix_tree_insert()
despite they both may return a negative error code. Linus Walleij said he
has copied the radix tree code from kernel/irq/ where the functions calling
radix_tree_insert() are *void* themselves; I think it makes more sense to
propagate the errors from radix_tree_insert() upstream if we can do that...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230719202253.13469-3-s.shtylyov@omp.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_generic_add_group() doesn't check the result of radix_tree_insert()
despite they both may return a negative error code. Linus Walleij said he
has copied the radix tree code from kernel/irq/ where the functions calling
radix_tree_insert() are *void* themselves; I think it makes more sense to
propagate the errors from radix_tree_insert() upstream if we can do that...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230719202253.13469-2-s.shtylyov@omp.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the pin controller block on SM6115's Low Power Island.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230722-topic-6115_lpasstlmm-v2-2-d4883831a858@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().
While at it, use dev_err_probe() which filters -EPROBE_DEFER.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a4a586337d692f0ca396b80d275ba634eb419593.1690058500.git.christophe.jaillet@wanadoo.fr
[geert: Make clk local to rzg2l_pinctrl_probe()]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add driver for pin controller in Low Power Audio SubSystem (LPASS). The
driver is similar to SM8250 LPASS pin controller, with difference in one
new pin (gpio14) belonging to swr_tx_data.
Link: https://lore.kernel.org/r/20230719192058.433517-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On some systems amd_pinconf_set() is called with parameters
0x8 (PIN_CONFIG_DRIVE_PUSH_PULL) or 0x14 (PIN_CONFIG_PERSIST_STATE)
which are not supported by pinctrl-amd.
Don't show an err message when called with an invalid parameter,
downgrade this to debug instead.
Cc: stable@vger.kernel.org # 6.1
Fixes: 635a750d95 ("pinctrl: amd: Use amd_pinconf_set() for all config options")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230717201652.17168-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a new pinctrl driver for Amlogic C3 SoCs which share
the same register layout as the previous Amlogic S4.
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Link: https://lore.kernel.org/r/20230714122441.3098337-3-huqiang.qin@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230714174901.4062397-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some platforms provide a single clock source to all LPASS peripherals,
others provide two, and there are probably others that provide it through
magic invisible-to-Linux wires.
Rely on bindings to mandate the adequate number of clocks necessary.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230714-topic-lpass_lpi_cleanup-v1-1-dc18b5bd14f7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current function for a given pin is not displayed via the debugfs.
Add support to display the current function that is set for each pin.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230714113547.15384-1-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The sunxi pinctrl has a fixed size array it uses to store regulators used
in the driver. There is currently nothing that ensures that the number of
elements in the array is large enough to map the regulators defined by the
individual SoCs. While this is currently the case having an explicit check
in there will make life easier for anyone debugging memory issues that
manifest in the driver so let's add one.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230712-pinctrl-sunxi-boudns-v1-1-85f37de79b9f@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds support for an optional "reset" GPIO pin in the cy8c95x0
pinctrl driver. On probe, the reset pin is pulled low to bring chip out
of reset. The reset pin has an internal pull-down and can be left
floating if not required.
The datasheet doesn't mention any timing related to the reset pin.
Based on empirical tests, it was found that the chip requires a
delay of 250 milliseconds before accepting I2C transfers after driving
the reset pin low. Therefore, a delay of 250ms is added before
proceeding with I2C transfers.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230714081902.2621771-2-Naresh.Solanki@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704124742.9596-4-frank.li@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704124742.9596-2-frank.li@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704124742.9596-1-frank.li@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Fix handling of non-unique pin control configuration subnode names
on the RZ/V2M and RZ/G2L SoC families.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZK6cTAAKCRCKwlD9ZEnx
cPlbAPwKp2wIc7pN6vWsepYxPqIdQ5QVL1erZmJiTq+9ePde4AEAyhpMwlJjF7me
4xTv3b9roIyAH0kygOwO9CwWs43cGwg=
=W2Ae
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-fixes-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into fixes
pinctrl: renesas: Fixes for v6.5
- Fix handling of non-unique pin control configuration subnode names
on the RZ/V2M and RZ/G2L SoC families.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Debounce handling is done in two different entry points in the driver.
Unify this to make sure that it's always handled the same.
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-5-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl-amd currently tries to program bit 19 of all GPIOs to select
either a 4kΩ or 8hΩ pull up, but this isn't what bit 19 does. Bit
19 is marked as reserved, even in the latest platforms documentation.
Drop this programming functionality.
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-4-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to
GPIO 7 is causing an interrupt storm. This issue doesn't happen on
Windows.
Comparing the GPIO register configuration between Windows and Linux
bit 20 has been configured as a pull up on Windows, but not on Linux.
Checking GPIO declaration from the firmware it is clear it *should* have
been a pull up on Linux as well.
```
GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0007
}
```
On Linux amd_gpio_set_config() is currently only used for programming
the debounce. Actually the GPIO core calls it with all the arguments
that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`.
To solve this issue expand amd_gpio_set_config() to support the other
arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`,
`PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`.
Reported-by: Nik P <npliashechnikov@gmail.com>
Reported-by: Nathan Schulte <nmschulte@gmail.com>
Reported-by: Friedrich Vock <friedrich.vock@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Reported-by: dridri85@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217493
Link: https://lore.kernel.org/linux-input/20230530154058.17594-1-friedrich.vock@gmx.de/
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Fixes: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230705133005.577-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It's uncommon to use debounce on any other pin, but technically
we should only set debounce to 0 when working off GPIO0.
Cc: stable@vger.kernel.org
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Fixes: 968ab92616 ("pinctrl: amd: Detect internal GPIO0 debounce handling")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently, sd1 and sd0 have unique subnode names 'sd1_mux' and 'sd0_mux'.
If we change these to non-unique subnode names such as 'mux' this can
lead to the below conflict as the RZ/G2L pin control driver considers
only the names of the subnodes.
pinctrl-rzg2l 11030000.pinctrl: pin P47_0 already requested by 11c00000.mmc; cannot claim for 11c10000.mmc
pinctrl-rzg2l 11030000.pinctrl: pin-376 (11c10000.mmc) status -22
pinctrl-rzg2l 11030000.pinctrl: could not request pin 376 (P47_0) from group mux on device pinctrl-rzg2l
renesas_sdhi_internal_dmac 11c10000.mmc: Error applying setting, reverse things back
Fix this by constructing unique names from the node names of both the
pin control configuration node and its child node, where appropriate.
Based on the work done by Geert for the RZ/V2M pinctrl driver.
Fixes: c4c4637eb5 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230704111858.215278-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The eMMC and SDHI pin control configuration nodes in DT have subnodes
with the same names ("data" and "ctrl"). As the RZ/V2M pin control
driver considers only the names of the subnodes, this leads to
conflicts:
pinctrl-rzv2m b6250000.pinctrl: pin P8_2 already requested by 85000000.mmc; cannot claim for 85020000.mmc
pinctrl-rzv2m b6250000.pinctrl: pin-130 (85020000.mmc) status -22
renesas_sdhi_internal_dmac 85020000.mmc: Error applying setting, reverse things back
Fix this by constructing unique names from the node names of both the
pin control configuration node and its child node, where appropriate.
Reported by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Fixes: 92a9b82525 ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/607bd6ab4905b0b1b119a06ef953fa1184505777.1688396717.git.geert+renesas@glider.be
No core changes this time.
New drivers:
- Tegra234 support.
- Qualcomm IPQ5018 support.
- Intel Meteor Lake-S support.
- Qualcomm SDX75 subdriver.
- Qualcomm SPMI-based PM8953 support.
Improvements:
- Fix up support for GPIO3 on the AXP209.
- Push-pull drive configuration support for the AT91 PIO4.
- Fix misc non-urgent bugs in the AMD driver.
- Misc non-urgent improved error handling.
- Misc janitorial and minor improvements.
-----BEGIN PGP SIGNATURE-----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=MMUo
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time
New drivers:
- Tegra234 support
- Qualcomm IPQ5018 support
- Intel Meteor Lake-S support
- Qualcomm SDX75 subdriver
- Qualcomm SPMI-based PM8953 support
Improvements:
- Fix up support for GPIO3 on the AXP209
- Push-pull drive configuration support for the AT91 PIO4
- Fix misc non-urgent bugs in the AMD driver
- Misc non-urgent improved error handling
- Misc janitorial and minor improvements"
* tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: cherryview: Drop goto label
pinctrl: baytrail: invert if condition
pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure
pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook
pinctrl: tegra: avoid duplicate field initializers
dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function
pinctrl: mlxbf3: remove broken Kconfig 'select'
pinctrl: spear: Remove unused of_gpio.h inclusion
pinctrl: lantiq: Remove unused of_gpio.h inclusion
pinctrl: at91-pio4: check return value of devm_kasprintf()
pinctrl: microchip-sgpio: check return value of devm_kasprintf()
pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
pinctrl: intel: refine ->irq_set_type() hook
pinctrl: intel: refine ->set_mux() hook
pinctrl: baytrail: Use str_hi_lo() helper
lib/string_choices: Add str_high_low() helper
lib/string_helpers: Split out string_choices.h
lib/string_helpers: Add missing header files to MAINTAINERS database
pinctrl: npcm7xx: Add missing check for ioremap
pinctrl:sunplus: Add check for kmalloc
...
There are two new SoC families this time, and both appear fairly similar:
The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core
Cortex-A35 based chips for the low-power industrial embedded market,
and they mark the first 64-bit product in a widely used family of 32-bit
Arm MCUs and SoCs.
The way into the kernel is completely different here: The team at ST has
a long history of working upstream with their STM32MP1 and other SoCs,
and they produced a complete port to arm64 together with the initial
announcement. Nuvoton also has multiple SoC product lines with current
or previous upstream support, but those are maintained by third parties
and are unrelated. The patch series from Nuvoton's Jacky Huang had to
go through many revisisions to get to this point and is still missing
a few drivers including the serial port for the moment.
The branch contains the devicetree files as well as all the code changes,
in order to have something that can be tested standalone.
-----BEGIN PGP SIGNATURE-----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=zaVi
-----END PGP SIGNATURE-----
Merge tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new ARM SoC support from Arnd Bergmann:
"There are two new SoC families this time, and both appear fairly
similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are
both dual-core Cortex-A35 based chips for the low-power industrial
embedded market, and they mark the first 64-bit product in a widely
used family of 32-bit Arm MCUs and SoCs.
The way into the kernel is completely different here: The team at ST
has a long history of working upstream with their STM32MP1 and other
SoCs, and they produced a complete port to arm64 together with the
initial announcement. Nuvoton also has multiple SoC product lines with
current or previous upstream support, but those are maintained by
third parties and are unrelated. The patch series from Nuvoton's Jacky
Huang had to go through many revisisions to get to this point and is
still missing a few drivers including the serial port for the moment.
The branch contains the devicetree files as well as all the code
changes, in order to have something that can be tested standalone"
* tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
clk: nuvoton: Use clk_parent_data instead of string for parent clock
clk: nuvoton: Update all constant hex values to lowercase
clk: nuvoton: Add clk-ma35d1.h for driver extern functions
remoteproc: stm32: use correct format strings on 64-bit
MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE
arm64: defconfig: enable ARCH_STM32 and STM32 serial driver
arm64: dts: st: add stm32mp257f-ev1 board support
dt-bindings: stm32: document stm32mp257f-ev1 board
arm64: dts: st: introduce stm32mp25 pinctrl files
arm64: dts: st: introduce stm32mp25 SoCs family
arm64: introduce STM32 family on Armv8 architecture
dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon
pinctrl: stm32: add stm32mp257 pinctrl support
dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages
Documentation/process: add soc maintainer handbook
reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35
reset: Add Nuvoton ma35d1 reset driver support
clk: nuvoton: Add clock driver for ma35d1 clock controller
arm64: dts: nuvoton: Add initial ma35d1 device tree
dt-bindings: serial: Document ma35d1 uart controller
...
This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree, I
don't know what it is about those two trees (this for spi-geni-qcom).
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZkRUACgkQJNaLcl1U
h9A0bAf+IM6F/vTF7R/2NTlR3M/Z7HGinxK1oit6LuZfKnveaRRCEWvBVoZzZpjs
CzdWTPBWA2jyETzEqmX7gxYnxf2aaLieLEpKRZSh3uQd5OKmrizQDs5/OdaVUViK
/ytmqd/IFgFfwaI+az38CQlTf+dDyuJDB0OwlkEkoaxWjeiAh6INBh6xO9aKczoW
lFd0tOVQt1EcBKdB4tBJLTFIWWsG66xy9NZ018FrcA+bCmQVBvkbqcahayI5Q6Kw
m5H7cZuFbKV51AlyYMF/C4Lwhy1mOT166eRmSrgxBXCsqhpFeHYkJQkmumNd3gkQ
oSQPTZHqSblJA7Utw09mlT6r/xqL0Q==
=/f85
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree,
I don't know what it is about those two trees (this for
spi-geni-qcom).
Summary:
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"
* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
regulator: Add Renesas PMIC RAA215300 driver
regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
regulator: ltc3676: Use maple tree register cache
regulator: ltc3589: Use maple tree register cache
regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
regulator: mt6358: Use linear voltage helpers for single range regulators
regulator: mt6358: Const-ify mt6358_regulator_info data structures
regulator: mt6358: Drop *_SSHUB regulators
regulator: mt6358: Merge VCN33_* regulators
regulator: dt-bindings: mt6358: Drop *_sshub regulators
regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
regulator: Switch two more i2c drivers back to use .probe()
spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
regulator: axp20x: Add AXP15060 support
regulator: axp20x: Add support for AXP313a variant
dt-bindings: pfuze100.yaml: Add an entry for interrupts
regulator: stm32-pwr: Fix regulator disabling
...
Merge updates related to system-wide power management and generic power
domains (genpd) updates for 6.5-rc1:
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
* pm-sleep:
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
PM: suspend: add a arch_resume_nosmt() prototype
PM: hibernate: Correct spelling mistake in a comment
PM: suspend: Fix pm_suspend_target_state handling for !CONFIG_PM
* pm-domains:
PM: domains: Move the verification of in-params from genpd_add_device()
PM: domains: fix integer overflow issues in genpd_parse_state()
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.
The details of PMIC can be found here[1].
Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.
* Fix of OPEN DRAIN pin mode setting in a few drivers
* Reduce a scope of spin lock in the Bay Trail driver
* Decrease a code footprint by refactoring in a few drivers
* Expand string choices and reuse that in the Bay Trail driver
The following is an automated git shortlog grouped by driver:
baytrail:
- invert if condition
- add warning for BYT_VAL_REG retrieval failure
- reduce scope of spinlock in ->dbg_show() hook
- Use str_hi_lo() helper
- Use BIT() in BYT_PULL_ASSIGN_* definitions
- Unify style of error and debug messages
cherryview:
- Drop goto label
- Return correct value if pin in push-pull mode
- Don't use IRQ core constanst for invalid IRQ
intel:
- refine ->irq_set_type() hook
- refine ->set_mux() hook
- Add Intel Meteor Lake-S pin controller support
lib/string_helpers:
- Add str_high_low() helper
- Split out string_choices.h
- Add missing header files to MAINTAINERS database
merrifield:
- Use BUFCFG_PINMODE_GPIO in ->pin_dbg_show()
- Fix open-drain pin mode configuration
moorefield:
- Use BUFCFG_PINMODE_GPIO in ->pin_dbg_show()
- Fix open-drain pin mode configuration
-----BEGIN PGP SIGNATURE-----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=pJDH
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.5-1
* Fix of OPEN DRAIN pin mode setting in a few drivers
* Reduce a scope of spin lock in the Bay Trail driver
* Decrease a code footprint by refactoring in a few drivers
* Expand string choices and reuse that in the Bay Trail driver
The following is an automated git shortlog grouped by driver:
baytrail:
- invert if condition
- add warning for BYT_VAL_REG retrieval failure
- reduce scope of spinlock in ->dbg_show() hook
- Use str_hi_lo() helper
- Use BIT() in BYT_PULL_ASSIGN_* definitions
- Unify style of error and debug messages
cherryview:
- Drop goto label
- Return correct value if pin in push-pull mode
- Don't use IRQ core constanst for invalid IRQ
intel:
- refine ->irq_set_type() hook
- refine ->set_mux() hook
- Add Intel Meteor Lake-S pin controller support
lib/string_helpers:
- Add str_high_low() helper
- Split out string_choices.h
- Add missing header files to MAINTAINERS database
merrifield:
- Use BUFCFG_PINMODE_GPIO in ->pin_dbg_show()
- Fix open-drain pin mode configuration
moorefield:
- Use BUFCFG_PINMODE_GPIO in ->pin_dbg_show()
- Fix open-drain pin mode configuration
We do not use goto labels in the Intel pin control drivers,
so drop the only one in the entire folder.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Invert if condition and get rid of redundant else.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230616203356.27343-4-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add warning for BYT_VAL_REG retrieval failure and continue such case
to avoid unintended reads/writes in pm_ops.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230616203356.27343-3-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reduce scope of spinlock to IO operations in ->dbg_show() hook
and save a few bytes.
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-12 (-12)
Function old new delta
byt_gpio_dbg_show 890 878 -12
Total: Before=17029, After=17017, chg -0.07%
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230616203356.27343-2-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The drv_reg field is initialized both in the DRV_PINGROUP_ENTRY_N/DRV_PINGROUP_ENTRY_Y
macros and in DRV_PINGROUP_Y. Since each pingroup expands both macros, the are
always duplicate and turning on -Woverride-init (which is disabled by default)
causes a huge amount of warnings like:
drivers/pinctrl/tegra/pinctrl-tegra234.c:1384:27: error: initialized field overwritten [-Werror=override-init]
1384 | #define DRV_PINGROUP_Y(r) ((r))
| ^
drivers/pinctrl/tegra/pinctrl-tegra234.c:1397:28: note: in expansion of macro 'DRV_PINGROUP_Y'
1397 | .drv_reg = DRV_PINGROUP_Y(r), \
| ^~~~~~~~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra234.c:1447:49: note: in expansion of macro 'DRV_PINGROUP_ENTRY_Y'
1447 | #define drive_soc_gpio08_pb0 DRV_PINGROUP_ENTRY_Y(0x500c, 12, 5, 20, 5, -1, -1, -1, -1, 0)
| ^~~~~~~~~~~~~~~~~~~~
...
Remove the intialization that is never used here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616161603.1127687-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The new pinctrl driver selects GPIO_MLXBF3, but that can not be enabled yet because
the MELLANOX_PLATFORM symbol does not exist in the tree:
WARNING: unmet direct dependencies detected for GPIO_MLXBF3
Depends on [n]: GPIOLIB [=y] && PCI [=n] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y])
Selected by [y]:
- PINCTRL_MLXBF3 [=y] && PINCTRL [=y] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y])
As it turns out, the pinctlr driver still builds fine without this, so just
remove the select statement.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230619082104.699331-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio.h is not and shouldn't be used in the drivers. Remove it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230615164158.25406-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).
Fixes: 776180848b ("pinctrl: introduce driver for Atmel PIO4 controller")
Depends-on: 1c4e5c470a ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks")
Depends-on: 5a8f9cf269 ("pinctrl: at91-pio4: use proper format specifier for unsigned int")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230615105333.585304-4-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).
Fixes: 7e5ea974e6 ("pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230615105333.585304-3-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The config passed in by pad wakeup is 1, when num_configs is 1,
Configuration [1] should not be fetched, which will be detected
by KASAN as a memory out of bounds condition. Modify to get
configs[1] when num_configs is 2.
Fixes: f60c9eac54 ("gpio: mxc: enable pad wakeup on i.MX8x platforms")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230504233736.3766296-1-xiaolei.wang@windriver.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Refine ->irq_set_type() hook and improve its readability by:
- Reducing scope of spinlock by moving unneeded operations out of it.
- Dropping redundant PADCFG0_RXEVCFG_SHIFT and including it directly
into PADCFG0_RXEVCFG_* definitions.
- Utilizing temporary variables for common operations.
- Simplifying if-else-if chain.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Utilize a temporary variable for common shift operation in
->set_mux() hook and improve readability while saving a few bytes.
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3)
Function old new delta
intel_pinmux_set_mux 245 242 -3
Total: Before=10472, After=10469, chg -0.03%
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230613085054.10976-2-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To make the GPIO tracking around suspend easier for end users to
use, link it with pm_debug_messages. This will make discovering
sources of spurious GPIOs around suspend easier.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap().
Fixes: 3b588e43ee ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230607095829.1345-1-jiasheng@iscas.ac.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix Smatch static checker warning:
potential null dereference 'configs'. (kmalloc returns null)
Changes in v2:
1. Add free allocated memory before returned -ENOMEM.
2. Add call of_node_put() before returned -ENOMEM.
Fixes: aa74c44be1 ("pinctrl: Add driver for Sunplus SP7021")
Signed-off-by: Wells Lu <wellslutw@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/1685277277-12209-1-git-send-email-wellslutw@gmail.com
[Rebased on the patch from Lu Hongfei]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This is debugfs and there is no much sense to strict the user from
sending as much data as they can. The memdup_user_nul() will anyway
fail if there is not enough memory.
Relax the user input size by removing an artificial limitaion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230604131215.78847-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Current code is suboptimal in three ways:
1) it explicitly terminates the string which is not needed;
2) it might provoke additional faults, because asked lenght might be
bigger than the real one;
3) it consumes more than needed lines in the source.
Instead of using kmalloc() + strncpy_from_user() + terminating, just
utilize memdup_user_nul().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230604131215.78847-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This change adds support for the two pin controllers found on Tegra234.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230605154230.2910847-3-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The audio pin controller drivers depend on PINCTRL_LPASS_LPI, but since
PINCTRL_LPASS_LPI is not the first entry, they are not displayed in
menuconfig as dependent of PINCTRL_LPASS_LPI. Re-order the entries to
fix this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In menuconfig, some entries depending on PINCTRL_MSM are indented and
expressed as dependening but some not, because of other Kconfig entries
in between,
Move all main Qualcomm SoC pin controller driver entries into new
Kconfig.msm file so they will be nicely ordered in Kconfig file (by
CONFIG_ name) and properly indented as PINCTRL_MSM dependency in
menuconfig.
Functionally this is the same, but since entire file is guarded with "if
PINCTRL_MSM" drop this dependency from individual entries.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Makefile selected Qualcomm pinctrl drivers only for ARCH_QCOM, making
any COMPILE_TEST options inside Kconfig ((ARCH_QCOM || COMPILE_TEST) or
(OF || COMPILE_TEST)) not effective. Always descent to the qcom
subdirectory to fix this. All individual drivers are selected in
Makefile via dedicated CONFIG entries, thus this should not have
functional impact except when compile testing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The common MSM pinctrl driver code (PINCTRL_MSM) uses
pinconf_generic_dt_node_to_map_group() from GENERIC_PINCONF, which is
not available for compile testing for !OF cases. Drivers actually do
not depend on OF. Move the OF dependency to the entry actually
depending on it and drop any "|| COMPILE_TEST", because OF is required
also for compile testing (lack of OF was never visible in compile
testing because none of the drivers could be compile tested due to
Makefile).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
PINCTRL_MSM depends on GPIOLIB, thus individual driver entries depending
on the first do not have to depend on the latter.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Driver can bind only via ACPI matching and acpi_device_id is there
unconditionally, so drop useless ACPI_PTR() macro.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230601152026.1182648-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
