For model-specific implementation, repurpose the acpi_smmu_get_options()
to a wider acpi_smmu_acpi_probe_model(). A new model can add to the list
in this new function.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/79716299829aeab2e55b8c7932f2634b209bb4d5.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The CMDQV extension in NVIDIA Tegra241 SoC only supports CS_NONE in the
CS field of CMD_SYNC. Add a new SMMU option to accommodate that.
Suggested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/a3cb9bb2429fbae4a59f7ef517614d226763d717.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The symbols __arm_smmu_cmdq_skip_err(), arm_smmu_init_one_queue(), and
arm_smmu_cmdq_init() need to be used by the tegra241-cmdqv compilation
unit in a following patch.
Remove the static and put prototypes in the header.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/c4f2aa5f5f40a2e7c68b132c6d3171d6403de57a.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The CMDQV extension on NVIDIA Tegra241 SoC only supports CS_NONE in the
CS field of CMD_SYNC, v.s. standard SMMU CMDQ. Pass in the cmdq pointer
directly, so the function can identify a different cmdq implementation.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/723288287997b6dfbcd2a904d2c11e9b23f82250.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The driver calls in different places the arm_smmu_get_cmdq() helper, and
it's fine to do so since the helper always returns the single SMMU CMDQ.
However, with NVIDIA CMDQV extension or SMMU ECMDQ, there can be multiple
cmdqs in the system to select one from. And either case requires a batch
of commands to be issued to the same cmdq. Thus, a cmdq has to be decided
in the higher-level callers.
Add a cmdq pointer in arm_smmu_cmdq_batch structure, and decide the cmdq
when initializing the batch. Pass its pointer down to the bottom function.
Update __arm_smmu_cmdq_issue_cmd() accordingly for single command issuers.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/2cbf5ddefb6ea611e48d67c642271bd24421eb21.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
PCI ATS has a global Smallest Translation Unit field that is located in
the PF but shared by all of the VFs.
The expectation is that the STU will be set to the root port's global STU
capability which is driven by the IO page table configuration of the iommu
HW. Today it becomes set when the iommu driver first enables ATS.
Thus, to enable ATS on the VF, the PF must have already had the correct
STU programmed, even if ATS is off on the PF.
Unfortunately the PF only programs the STU when the PF enables ATS. The
iommu drivers tend to leave ATS disabled when IDENTITY translation is
being used.
Thus we can get into a state where the PF is setup to use IDENTITY with
the DMA API while the VF would like to use VFIO with a PAGING domain and
have ATS turned on. This fails because the PF never loaded a PAGING domain
and so it never setup the STU, and the VF can't do it.
The simplest solution is to have the iommu driver set the ATS STU when it
probes the device. This way the ATS STU is loaded immediately at boot time
to all PFs and there is no issue when a VF comes to use it.
Add a new call pci_prepare_ats() which should be called by iommu drivers
in their probe_device() op for every PCI device if the iommu driver
supports ATS. This will setup the STU based on whatever page size
capability the iommu HW has.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-0fb4d2ab6770+7e706-ats_vf_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_report_device_fault function was updated to return void while
assuming that drivers only need to call iommu_report_device_fault() for
reporting an iopf. This implementation causes following problems:
1. The drivers rely on the core code to call it's page_reponse,
however, when a fault is received and no fault capable domain is
attached / iopf_param is NULL, the ops->page_response is NOT called
causing the device to stall in case the fault type was PAGE_REQ.
2. The arm_smmu_v3 driver relies on the returned value to log errors
returning void from iommu_report_device_fault causes these events to
be missed while logging.
Modify the iommu_report_device_fault function to return -EINVAL for
cases where no fault capable domain is attached or iopf_param was NULL
and calls back to the driver (ops->page_response) in case the fault type
was IOMMU_FAULT_PAGE_REQ. The returned value can be used by the drivers
to log the fault/event as needed.
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Closes: https://lore.kernel.org/all/6147caf0-b9a0-30ca-795e-a1aa502a5c51@huawei.com/
Fixes: 3dfa64aecb ("iommu: Make iommu_report_device_fault() return void")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240816104906.1010626-1-praan@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The arm_smmu_domain_alloc() function returns error pointers on error. It
doesn't return NULL. Update the error checking to match.
Fixes: 52acd7d8a4 ("iommu/arm-smmu-v3: Add support for domain_alloc_user fn")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9208cd0d-8105-40df-93e9-bdcdf0d55eec@stanley.mountain
Signed-off-by: Will Deacon <will@kernel.org>
arm_smmu_sva_remove_dev_pasid() has been removed since commit d38c28dbef
("iommu/arm-smmu-v3: Put the SVA mmu notifier in the smmu_domain"), remain
the empty definition untouched in header file, which is used when
CONFIG_ARM_SMMU_V3_SVA is not set. So, let's remove the unused definition.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240815111504.48810-1-zhangzekun11@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
If io-pgtable quirk flag indicates support for hardware update of
dirty state, enable HA/HD bits in the SMMU CD and also set the DBM
bit in the page descriptor.
Now report the dirty page tracking capability of SMMUv3 and
select IOMMUFD_DRIVER for ARM_SMMU_V3 if IOMMUFD is enabled.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20240703101604.2576-6-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
This provides all the infrastructure to enable dirty tracking if the
hardware has the capability and domain alloc request for it.
Also, add a device_iommu_capable() check in iommufd core for
IOMMU_CAP_DIRTY_TRACKING before we request a user domain with dirty
tracking support.
Please note, we still report no support for IOMMU_CAP_DIRTY_TRACKING
as it will finally be enabled in a subsequent patch.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20240703101604.2576-5-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
If the SMMU supports it and the kernel was built with HTTU support,
Probe support for Hardware Translation Table Update (HTTU) which is
essentially to enable hardware update of access and dirty flags.
Probe and set the smmu::features for Hardware Dirty and Hardware Access
bits. This is in preparation, to enable it on the context descriptors of
stage 1 format.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20240703101604.2576-3-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
This will be used by iommufd for allocating usr managed domains and is
also required when we add support for iommufd based dirty tracking
support.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20240703101604.2576-2-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-test.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Fixes: da55da5a42 ("iommu/arm-smmu-v3: Make the kunit into a module")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-iommu-arm-arm-smmu-v3-v1-1-0e9f7584a5c8@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
The top of the 2 level stream table is (at most) 128k entries big, and two
high order allocations are required. One of __le64 which is programmed
into the HW (1M), and one of struct arm_smmu_strtab_l1_desc which holds
the CPU pointer (3M).
There is no reason to store the l2ptr_dma as nothing reads it. devm stores
a copy of it and the DMA memory will be freed via devm mechanisms. span is
a constant of 8+1. Remove both.
This removes 16 bytes from each arm_smmu_l1_ctx_desc and saves up to 2M of
memory per iommu instance.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-318ed5f6983b+198f-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
dmam_alloc_coherent() already returns zero'd memory so cfg->strtab.l1_desc
(the list of DMA addresses for the L2 entries) is already zero'd.
arm_smmu_init_l1_strtab() goes through and calls
arm_smmu_write_strtab_l1_desc() on the newly allocated (and zero'd) struct
arm_smmu_strtab_l1_desc, which ends up computing 'val = 0' and zeroing it
again.
Remove arm_smmu_init_l1_strtab() and just call devm_kcalloc() from
arm_smmu_init_strtab_2lvl to allocate the companion struct.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-318ed5f6983b+198f-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The SVA cleanup made the SSID logic entirely general so all we need to do
is call it with the correct cd table entry for a S1 domain.
This is slightly tricky because of the ASID and how the locking works, the
simple fix is to just update the ASID once we get the right locks.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
If the STE doesn't point to the CD table we can upgrade it by
reprogramming the STE with the appropriate S1DSS. We may also need to turn
on ATS at the same time.
Keep track if the installed STE is pointing at the cd_table and the ATS
state to trigger this path.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
S1DSS brings in quite a few new transition pairs that are
interesting. Test to/from S1DSS_BYPASS <-> S1DSS_SSID0, and
BYPASS <-> S1DSS_SSID0.
Test a contrived non-hitless flow to make sure that the logic works.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The HW supports this, use the S1DSS bits to configure the behavior
of SSID=0 which is the RID's translation.
If SSID's are currently being used in the CD table then just update the
S1DSS bits in the STE, remove the master_domain and leave ATS alone.
For iommufd the driver design has a small problem that all the unused CD
table entries are set with V=0 which will generate an event if VFIO
userspace tries to use the CD entry. This patch extends this problem to
include the RID as well if PASID is being used.
For BLOCKED with used PASIDs the
F_STREAM_DISABLED (STRTAB_STE_1_S1DSS_TERMINATE) event is generated on
untagged traffic and a substream CD table entry with V=0 (removed pasid)
will generate C_BAD_CD. Arguably there is no advantage to using S1DSS over
the CD entry 0 with V=0.
As we don't yet support PASID in iommufd this is a problem to resolve
later, possibly by using EPD0 for unused CD table entries instead of V=0,
and not using S1DSS for BLOCKED.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This removes all the notifier de-duplication logic in the driver and
relies on the core code to de-duplicate and allocate only one SVA domain
per mm per smmu instance. This naturally gives a 1:1 relationship between
SVA domain and mmu notifier.
It is a significant simplication of the flow, as we end up with a single
struct arm_smmu_domain for each MM and the invalidation can then be
shifted to properly use the masters list like S1/S2 do.
Remove all of the previous mmu_notifier, bond, shared cd, and cd refcount
logic entirely.
The logic here is tightly wound together with the unusued BTM
support. Since the BTM logic requires holding all the iommu_domains in a
global ASID xarray it conflicts with the design to have a single SVA
domain per PASID, as multiple SMMU instances will need to have different
domains.
Following patches resolve this by making the ASID xarray per-instance
instead of global. However, converting the BTM code over to this
methodology requires many changes.
Thus, since ARM_SMMU_FEAT_BTM is never enabled, remove the parts of the
BTM support for ASID sharing that interact with SVA as well.
A followup series is already working on fully enabling the BTM support,
that requires iommufd's VIOMMU feature to bring in the KVM's VMID as
well. It will come with an already written patch to bring back the ASID
sharing using a per-instance ASID xarray.
https://lore.kernel.org/linux-iommu/20240208151837.35068-1-shameerali.kolothum.thodi@huawei.com/https://lore.kernel.org/linux-iommu/26-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com/
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Fill in the smmu_domain->devices list in the new struct arm_smmu_domain
that SVA allocates. Keep track of every SSID and master that is using the
domain reusing the logic for the RID attach.
This is the first step to making the SVA invalidation follow the same
design as S1/S2 invalidation. At present nothing will read this list.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently the SVA domain is a naked struct iommu_domain, allocate a struct
arm_smmu_domain instead.
This is necessary to be able to use the struct arm_master_domain
mechanism.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Allow creating and managing arm_smmu_mater_domain's with a non-zero SSID
through the arm_smmu_attach_*() family of functions. This triggers ATC
invalidation for the correct SSID in PASID cases and tracks the
per-attachment SSID in the struct arm_smmu_master_domain.
Generalize arm_smmu_attach_remove() to be able to remove SSID's as well by
ensuring the ATC for the PASID is flushed properly.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
We no longer need a master->sva_enable to control what attaches are
allowed. Instead we can tell if the attach is legal based on the current
configuration of the master.
Keep track of the number of valid CD entries for SSID's in the cd_table
and if the cd_table has been installed in the STE directly so we know what
the configuration is.
The attach logic is then made into:
- SVA bind, check if the CD is installed
- RID attach of S2, block if SSIDs are used
- RID attach of IDENTITY/BLOCKING, block if SSIDs are used
arm_smmu_set_pasid() is already checking if it is possible to setup a CD
entry, at this patch it means the RID path already set a STE pointing at
the CD table.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Prepare to allow a S1 domain to be attached to a PASID as well. Keep track
of the SSID the domain is using on each master in the
arm_smmu_master_domain.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The core code allows the domain to be changed on the fly without a forced
stop in BLOCKED/IDENTITY. In this flow the driver should just continually
maintain the ATS with no change while the STE is updated.
ATS relies on a linked list smmu_domain->devices to keep track of which
masters have the domain programmed, but this list is also used by
arm_smmu_share_asid(), unrelated to ats.
Create two new functions to encapsulate this combined logic:
arm_smmu_attach_prepare()
<caller generates and sets the STE>
arm_smmu_attach_commit()
The two functions can sequence both enabling ATS and disabling across
the STE store. Have every update of the STE use this sequence.
Installing a S1/S2 domain always enables the ATS if the PCIe device
supports it.
The enable flow is now ordered differently to allow it to be hitless:
1) Add the master to the new smmu_domain->devices list
2) Program the STE
3) Enable ATS at PCIe
4) Remove the master from the old smmu_domain
This flow ensures that invalidations to either domain will generate an ATC
invalidation to the device while the STE is being switched. Thus we don't
need to turn off the ATS anymore for correctness.
The disable flow is the reverse:
1) Disable ATS at PCIe
2) Program the STE
3) Invalidate the ATC
4) Remove the master from the old smmu_domain
Move the nr_ats_masters adjustments to be close to the list
manipulations. It is a count of the number of ATS enabled masters
currently in the list. This is stricly before and after the STE/CD are
revised, and done under the list's spin_lock.
This is part of the bigger picture to allow changing the RID domain while
a PASID is in use. If a SVA PASID is relying on ATS to function then
changing the RID domain cannot just temporarily toggle ATS off without
also wrecking the SVA PASID. The new infrastructure here is organized so
that the PASID attach/detach flows will make use of it as well in
following patches.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The next patch will need to store the same master twice (with different
SSIDs), so allocate memory for each list element.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Add arm_smmu_set_pasid()/arm_smmu_remove_pasid() which are to be used by
callers that already constructed the arm_smmu_cd they wish to program.
These functions will encapsulate the shared logic to setup a CD entry that
will be shared by SVA and S1 domain cases.
Prior fixes had already moved most of this logic up into
__arm_smmu_sva_bind(), move it to it's final home.
Following patches will relieve some of the remaining SVA restrictions:
- The RID domain is a S1 domain and has already setup the STE to point to
the CD table
- The programmed PASID is the mm_get_enqcmd_pasid()
- Nothing changes while SVA is running (sva_enable)
SVA invalidation will still iterate over the S1 domain's master list,
later patches will resolve that.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This allows the driver the receive the mm and always a device during
allocation. Later patches need this to properly setup the notifier when
the domain is first allocated.
Remove ops->domain_alloc() as SVA was the only remaining purpose.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240508151611.1444352-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Static checker is complaining about the ASID possibly set uninitialized.
This only happens in case of error and this value would be ignored anyway.
A simple fix would be just to initialize the local variable to zero,
this path will only be reached on the first attach to a domain where
the CD is already initialized to zero.
This avoids having to bloat the function with an error path.
Closes: https://lore.kernel.org/linux-iommu/849e3d77-0a3c-43c4-878d-a0e061c8cd61@moroto.mountain/T/#u
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Fixes: 04905c17f6 ("iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240604185218.2602058-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
It turns out kconfig has problems ensuring the SMMU module and the KUNIT
module are consistently y/m to allow linking. It will permit KUNIT to be a
module while SMMU is built in.
Also, Fedora apparently enables kunit on production kernels.
So, put the entire kunit in its own module using the
VISIBLE_IF_KUNIT/EXPORT_SYMBOL_IF_KUNIT machinery. This keeps it out of
vmlinus on Fedora and makes the kconfig work in the normal way. There is
no cost if kunit is disabled.
Fixes: 56e1a4cc25 ("iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry")
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/all/aeea8546-5bce-4c51-b506-5d2008e52fef@leemhuis.info
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/0-v1-24cba6c0f404+2ae-smmu_kunit_module_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add tests for some of the more common STE update operations that we expect
to see, as well as some artificial STE updates to test the edges of
arm_smmu_write_entry. These also serve as a record of which common
operation is expected to be hitless, and how many syncs they require.
arm_smmu_write_entry implements a generic algorithm that updates an STE/CD
to any other abritrary STE/CD configuration. The update requires a
sequence of write+sync operations with some invariants that must be held
true after each sync. arm_smmu_write_entry lends itself well to
unit-testing since the function's interaction with the STE/CD is already
abstracted by input callbacks that we can hook to introspect into the
sequence of operations. We can use these hooks to guarantee that
invariants are held throughout the entire update operation.
Link: https://lore.kernel.org/r/20240106083617.1173871-3-mshavit@google.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Half the code was living in arm_smmu_domain_finalise_s1(), just move it
here and take the values directly from the pgtbl_ops instead of storing
copies.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Pull all the calculations for building the CD table entry for a mmu_struct
into arm_smmu_make_sva_cd().
Call it in the two places installing the SVA CD table entry.
Open code the last caller of arm_smmu_update_ctx_desc_devices() and remove
the function.
Remove arm_smmu_write_ctx_desc() since all callers are gone. Add the
locking assertions to arm_smmu_alloc_cd_ptr() since
arm_smmu_update_ctx_desc_devices() was the last problematic caller.
Remove quiet_cd since all users are gone, arm_smmu_make_sva_cd() creates
the same value.
The behavior of quiet_cd changes slightly, the old implementation edited
the CD in place to set CTXDESC_CD_0_TCR_EPD0 assuming it was a SVA CD
entry. This version generates a full CD entry with a 0 TTB0 and relies on
arm_smmu_write_cd_entry() to install it hitlessly.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Avoid arm_smmu_attach_dev() having to undo the changes to the
smmu_domain->devices list, acquire the cdptr earlier so we don't need to
handle that error.
Now there is a clear break in arm_smmu_attach_dev() where all the
prep-work has been done non-disruptively and we commit to making the HW
change, which cannot fail.
This completes transforming arm_smmu_attach_dev() so that it does not
disturb the HW if it fails.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Only the attach callers can perform an allocation for the CD table entry,
the other callers must not do so, they do not have the correct locking and
they cannot sleep. Split up the functions so this is clear.
arm_smmu_get_cd_ptr() will return pointer to a CD table entry without
doing any kind of allocation.
arm_smmu_alloc_cd_ptr() will allocate the table and any required
leaf.
A following patch will add lockdep assertions to arm_smmu_alloc_cd_ptr()
once the restructuring is completed and arm_smmu_alloc_cd_ptr() is never
called in the wrong context.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
A cleared entry is all 0's. Make arm_smmu_clear_cd() do this sequence.
If we are clearing an entry and for some reason it is not already
allocated in the CD table then something has gone wrong.
Remove case (5) from arm_smmu_write_ctx_desc().
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Introduce arm_smmu_make_s1_cd() to build the CD from the paging S1 domain,
and reorganize all the places programming S1 domain CD table entries to
call it.
Split arm_smmu_update_s1_domain_cd_entry() from
arm_smmu_update_ctx_desc_devices() so that the S1 path has its own call
chain separate from the unrelated SVA path.
arm_smmu_update_s1_domain_cd_entry() only works on S1 domains attached to
RIDs and refreshes all their CDs. Remove case (3) from
arm_smmu_write_ctx_desc() as it is now handled by directly calling
arm_smmu_write_cd_entry().
Remove the forced clear of the CD during S1 domain attach,
arm_smmu_write_cd_entry() will do this automatically if necessary.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
[will: Drop unused arm_smmu_clean_cd_entry() function]
Signed-off-by: Will Deacon <will@kernel.org>
CD table entries and STE's have the same essential programming sequence,
just with different types. Use the new ops indirection to link CD
programming to the common writer.
In a few more patches all CD writers will call an appropriate make
function and then directly call arm_smmu_write_cd_entry().
arm_smmu_write_ctx_desc() will be removed.
Until then lightly tweak arm_smmu_write_ctx_desc() to also use the new
programmer by using the same logic as right now to build the target CD on
the stack, sanitizing it to meet the used rules, and then using the
writer.
Sanitizing is necessary because the writer expects that the currently
programmed CD follows the used rules. Next patches add new make functions
and new direct calls to arm_smmu_write_cd_entry() which will require this.
Signed-off-by: Michael Shavit <mshavit@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Prepare to put the CD code into the same mechanism. Add an ops indirection
around all the STE specific code and make the worker functions independent
of the entry content being processed.
get_used and sync ops are provided to hook the correct code.
Signed-off-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
If devm_add_action() returns -ENOMEM, then MSIs are allocated but not
not freed on teardown. Use devm_add_action_or_reset() instead to keep
the static analyser happy.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Aleksandr Aprelkov <aaprelkov@usergate.com>
Link: https://lore.kernel.org/r/20240403053759.643164-1-aaprelkov@usergate.com
[will: Tweak commit message, remove warning message]
Signed-off-by: Will Deacon <will@kernel.org>
Existing remove_dev_pasid() callbacks of the underlying iommu drivers
get the attached domain from the group->pasid_array. However, the domain
stored in group->pasid_array is not always correct in all scenarios.
A wrong domain may result in failure in remove_dev_pasid() callback.
To avoid such problems, it is more reliable to pass the domain to the
remove_dev_pasid() op.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240328122958.83332-3-yi.l.liu@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead of passing a naked __le16 * around to represent a CD table entry
wrap it in a "struct arm_smmu_cd" with an array of the correct size. This
makes it much clearer which functions will comprise the "CD API".
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
At this point we know which master we are going to change the PCI config
on, this is the only device we need to invalidate. Switch
arm_smmu_atc_inv_domain() for arm_smmu_atc_inv_master().
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The SVA code is wired to assume that the SVA is programmed onto the
mm->pasid. The current core code always does this, so it is fine.
Add a check for clarity.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The disable_bypass parameter has been mostly meaningless for a long time
since the introduction of default domains. Its original intent is now
fulfilled by the controls users have over the default domain type, and
its remaining effect in the brief window between Stream Table
initialisation and default domain creation hardly seems worth the
complication. Furthermore, thanks to 2-level Stream Tables, disabling
disable_bypass (there's another reason not to like it right there) has
never guaranteed that any particular StreamID *will* bypass anyway - any
device which might actually care about that wants RMRs - so there's not
really much lost by taking away that option (which has already been
non-default for nearing 6 years now).
As part of this, also remove the weird behaviour where we "successfully"
probe and register a non-functional SMMU if the DT "#iommu-cells"
property is wrong. I have no memory of what possessed me to think that
was a good idea at the time, and by now I suspect it's likely to break
things worse than simply failing probe would.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/ea3ac4cd595a81b5511729601b2f7d4668178438.1712335927.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
STE attributes(NSCFG, PRIVCFG, INSTCFG) use value 0 for "Use Icomming",
for some reason SHCFG doesn't follow that, and it is defined as "0b01".
Currently the driver sets SHCFG to Use Incoming for stage-2 and bypass
domains.
However according to the User Manual (ARM IHI 0070 F.b):
When SMMU_IDR1.ATTR_TYPES_OVR == 0, this field is RES0 and the
incoming Shareability attribute is used.
This patch adds a condition for writing SHCFG to Use incoming to be
compliant with the architecture, and defines ATTR_TYPE_OVR as a new
feature discovered from IDR1.
This also required to propagate the SMMU through some functions args.
There is no need to add similar condition for the newly introduced function
arm_smmu_get_ste_used() as the values of the STE are the same before and
after any transition, so this will not trigger any change. (we already
do the same for the VMID).
Although this is a misconfiguration from the driver, this has been there
for a long time, so probably no HW running Linux is affected by it.
Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/all/20240215134952.GA690@willie-the-truck/
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240323134658.464743-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Including:
- Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
- Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
- ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
- AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
- Some smaller cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=HV07
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
Some smaller cleanups and fixes"
* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu: Fix compilation without CONFIG_IOMMU_INTEL
iommu/amd: Fix sleeping in atomic context
iommu/dma: Document min_align_mask assumption
iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
iommu/vt-d: Remove scalable mode context entry setup from attach_dev
iommu/vt-d: Setup scalable mode context entry in probe path
iommu/vt-d: Fix NULL domain on device release
iommu: Add static iommu_ops->release_domain
iommu/vt-d: Improve ITE fault handling if target device isn't present
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
PCI: Make pci_dev_is_disconnected() helper public for other drivers
iommu/vt-d: Use device rbtree in iopf reporting path
iommu/vt-d: Use rbtree to track iommu probed devices
iommu/vt-d: Merge intel_svm_bind_mm() into its caller
iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
iommu/vt-d: Add the document for Intel IOMMU debugfs
iommu/vt-d: Use kcalloc() instead of kzalloc()
iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
...
- Core and platform-MSI
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
- Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
-----BEGIN PGP SIGNATURE-----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=7aXj
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216144027.185959-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the BLOCKED and IDENTITY behaviors are managed with their own
domains change to the domain_alloc_paging() op.
For now SVA remains using the old interface, eventually it will get its
own op that can pass in the device and mm_struct which will let us have a
sane lifetime for the mmu_notifier.
Call arm_smmu_domain_finalise() early if dev is available.
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/16-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Instead of putting container_of() casts in the internals, use the proper
type in this call chain. This makes it easier to check that the two global
static domains are not leaking into call chains they should not.
Passing the smmu avoids the only caller from having to set it and unset it
in the error path.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/15-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Consolidate some more code by having release call
arm_smmu_attach_dev_identity/blocked() instead of open coding this.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Using the same design as the IDENTITY domain install an
STRTAB_STE_0_CFG_ABORT STE.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Move to the new static global for identity domains. Move all the logic out
of arm_smmu_attach_dev into an identity only function.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The SVA code only works if the RID domain is a S1 domain and has already
installed the cdtable.
Originally the check for this was in arm_smmu_sva_bind() but when the op
was removed the test didn't get copied over to the new
arm_smmu_sva_set_dev_pasid().
Without the test wrong usage usually will hit a WARN_ON() in
arm_smmu_write_ctx_desc() due to a missing ctx table.
However, the next patches wil change things so that an IDENTITY domain is
not a struct arm_smmu_domain and this will get into memory corruption if
the struct is wrongly casted.
Fail in arm_smmu_sva_set_dev_pasid() if the STE does not have a S1, which
is a proxy for the STE having a pointer to the CD table. Write it in a way
that will be compatible with the next patches.
Fixes: 386fa64fd5 ("arm-smmu-v3/sva: Add SVA domain support")
Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Closes: https://lore.kernel.org/linux-iommu/2a828e481416405fb3a4cceb9e075a59@huawei.com/
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Introducing global statics which are of type struct iommu_domain, not
struct arm_smmu_domain makes it difficult to retain
arm_smmu_master->domain, as it can no longer point to an IDENTITY or
BLOCKED domain.
The only place that uses the value is arm_smmu_detach_dev(). Change things
to work like other drivers and call iommu_get_domain_for_dev() to obtain
the current domain.
The master->domain is subtly protecting the master->domain_head against
being unused as only PAGING domains will set master->domain and only
paging domains use the master->domain_head. To make it simple keep the
master->domain_head initialized so that the list_del() logic just does
nothing for attached non-PAGING domains.
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The caller already has the domain, just pass it in. A following patch will
remove master->domain.
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Get closer to the IOMMU API ideal that changes between domains can be
hitless. The ordering for the CD table entry is not entirely clean from
this perspective.
When switching away from a STE with a CD table programmed in it we should
write the new STE first, then clear any old data in the CD entry.
If we are programming a CD table for the first time to a STE then the CD
entry should be programmed before the STE is loaded.
If we are replacing a CD table entry when the STE already points at the CD
entry then we just need to do the make/break sequence.
Lift this code out of arm_smmu_detach_dev() so it can all be sequenced
properly. The only other caller is arm_smmu_release_device() and it is
going to free the cdtable anyhow, so it doesn't matter what is in it.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This was needed because the STE code required the STE to be in
ABORT/BYPASS inorder to program a cdtable or S2 STE. Now that the STE code
can automatically handle all transitions we can remove this step
from the attach_dev flow.
A few small bugs exist because of this:
1) If the core code does BLOCKED -> UNMANAGED with disable_bypass=false
then there will be a moment where the STE points at BYPASS. Since
this can be done by VFIO/IOMMUFD it is a small security race.
2) If the core code does IDENTITY -> DMA then any IOMMU_RESV_DIRECT
regions will temporarily become BLOCKED. We'd like drivers to
work in a way that allows IOMMU_RESV_DIRECT to be continuously
functional during these transitions.
Make arm_smmu_release_device() put the STE back to the correct
ABORT/BYPASS setting. Fix a bug where a IOMMU_RESV_DIRECT was ignored on
this path.
As noted before the reordering of the linked list/STE/CD changes is OK
against concurrent arm_smmu_share_asid() because of the
arm_smmu_asid_lock.
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently arm_smmu_install_ste_for_dev() iterates over every SID and
computes from scratch an identical STE. Every SID should have the same STE
contents. Turn this inside out so that the STE is supplied by the caller
and arm_smmu_install_ste_for_dev() simply installs it to every SID.
This is possible now that the STE generation does not inform what sequence
should be used to program it.
This allows splitting the STE calculation up according to the call site,
which following patches will make use of, and removes the confusing NULL
domain special case that only supported arm_smmu_detach_dev().
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The BTM support wants to be able to change the ASID of any smmu_domain.
When it goes to do this it holds the arm_smmu_asid_lock and iterates over
the target domain's devices list.
During attach of a S1 domain we must ensure that the devices list and
CD are in sync, otherwise we could miss CD updates or a parallel CD update
could push an out of date CD.
This is pretty complicated, and almost works today because
arm_smmu_detach_dev() removes the master from the linked list before
working on the CD entries, preventing parallel update of the CD.
However, it does have an issue where the CD can remain programed while the
domain appears to be unattached. arm_smmu_share_asid() will then not clear
any CD entriess and install its own CD entry with the same ASID
concurrently. This creates a small race window where the IOMMU can see two
ASIDs pointing to different translations.
CPU0 CPU1
arm_smmu_attach_dev()
arm_smmu_detach_dev()
spin_lock_irqsave(&smmu_domain->devices_lock, flags);
list_del(&master->domain_head);
spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
arm_smmu_mmu_notifier_get()
arm_smmu_alloc_shared_cd()
arm_smmu_share_asid():
// Does nothing due to list_del above
arm_smmu_update_ctx_desc_devices()
arm_smmu_tlb_inv_asid()
arm_smmu_write_ctx_desc()
** Now the ASID is in two CDs
with different translation
arm_smmu_write_ctx_desc(master, IOMMU_NO_PASID, NULL);
Solve this by wrapping most of the attach flow in the
arm_smmu_asid_lock. This locks more than strictly needed to prepare for
the next patch which will reorganize the order of the linked list, STE and
CD changes.
Move arm_smmu_detach_dev() till after we have initialized the domain so
the lock can be held for less time.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Half the code was living in arm_smmu_domain_finalise_s2(), just move it
here and take the values directly from the pgtbl_ops instead of storing
copies.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This is preparation to move the STE calculation higher up in to the call
chain and remove arm_smmu_write_strtab_ent(). These new functions will be
called directly from attach_dev.
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This allows writing the flow of arm_smmu_write_strtab_ent() around abort
and bypass domains more naturally.
Note that the core code no longer supplies NULL domains, though there is
still a flow in the driver that end up in arm_smmu_write_strtab_ent() with
NULL. A later patch will remove it.
Remove the duplicate calculation of the STE in arm_smmu_init_bypass_stes()
and remove the force parameter. arm_smmu_rmr_install_bypass_ste() can now
simply invoke arm_smmu_make_bypass_ste() directly.
Rename arm_smmu_init_bypass_stes() to arm_smmu_init_initial_stes() to
better reflect its purpose.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
As the comment in arm_smmu_write_strtab_ent() explains, this routine has
been limited to only work correctly in certain scenarios that the caller
must ensure. Generally the caller must put the STE into ABORT or BYPASS
before attempting to program it to something else.
The iommu core APIs would ideally expect the driver to do a hitless change
of iommu_domain in a number of cases:
- RESV_DIRECT support wants IDENTITY -> DMA -> IDENTITY to be hitless
for the RESV ranges
- PASID upgrade has IDENTIY on the RID with no PASID then a PASID paging
domain installed. The RID should not be impacted
- PASID downgrade has IDENTIY on the RID and all PASID's removed.
The RID should not be impacted
- RID does PAGING -> BLOCKING with active PASID, PASID's should not be
impacted
- NESTING -> NESTING for carrying all the above hitless cases in a VM
into the hypervisor. To comprehensively emulate the HW in a VM we
should assume the VM OS is running logic like this and expecting
hitless updates to be relayed to real HW.
For CD updates arm_smmu_write_ctx_desc() has a similar comment explaining
how limited it is, and the driver does have a need for hitless CD updates:
- SMMUv3 BTM S1 ASID re-label
- SVA mm release should change the CD to answert not-present to all
requests without allowing logging (EPD0)
The next patches/series are going to start removing some of this logic
from the callers, and add more complex state combinations than currently.
At the end everything that can be hitless will be hitless, including all
of the above.
Introduce arm_smmu_write_ste() which will run through the multi-qword
programming sequence to avoid creating an incoherent 'torn' STE in the HW
caches. It automatically detects which of two algorithms to use:
1) The disruptive V=0 update described in the spec which disrupts the
entry and does three syncs to make the change:
- Write V=0 to QWORD 0
- Write the entire STE except QWORD 0
- Write QWORD 0
2) A hitless update algorithm that follows the same rational that the driver
already uses. It is safe to change IGNORED bits that HW doesn't use:
- Write the target value into all currently unused bits
- Write a single QWORD, this makes the new STE live atomically
- Ensure now unused bits are 0
The detection of which path to use and the implementation of the hitless
update rely on a "used bitmask" describing what bits the HW is actually
using based on the V/CFG/etc bits. This flows from the spec language,
typically indicated as IGNORED.
Knowing which bits the HW is using we can update the bits it does not use
and then compute how many QWORDS need to be changed. If only one qword
needs to be updated the hitless algorithm is possible.
Later patches will include CD updates in this mechanism so make the
implementation generic using a struct arm_smmu_entry_writer and struct
arm_smmu_entry_writer_ops to abstract the differences between STE and CD
to be plugged in.
At this point it generates the same sequence of updates as the current
code, except that zeroing the VMID on entry to BYPASS/ABORT will do an
extra sync (this seems to be an existing bug).
Going forward this will use a V=0 transition instead of cycling through
ABORT if a hitfull change is required. This seems more appropriate as ABORT
will fail DMAs without any logging, but dropping a DMA due to transient
V=0 is probably signaling a bug, so the C_BAD_STE is valuable.
Add STRTAB_STE_1_SHCFG_INCOMING to s2_cfg, this was editing the STE in
place and subtly inherited the value of data[1] from abort/bypass.
Signed-off-by: Michael Shavit <mshavit@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
If the SMMU is configured to use a two level CD table then
arm_smmu_write_ctx_desc() allocates a CD table leaf internally using
GFP_KERNEL. Due to recent changes this is being done under a spinlock to
iterate over the device list - thus it will trigger a sleeping while
atomic warning:
arm_smmu_sva_set_dev_pasid()
mutex_lock(&sva_lock);
__arm_smmu_sva_bind()
arm_smmu_mmu_notifier_get()
spin_lock_irqsave()
arm_smmu_write_ctx_desc()
arm_smmu_get_cd_ptr()
arm_smmu_alloc_cd_leaf_table()
dmam_alloc_coherent(GFP_KERNEL)
This is a 64K high order allocation and really should not be done
atomically.
At the moment the rework of the SVA to follow the new API is half
finished. Recently the CD table memory was moved from the domain to the
master, however we have the confusing situation where the SVA code is
wrongly using the RID domains device's list to track which CD tables the
SVA is installed in.
Remove the logic to replicate the CD across all the domain's masters
during attach. We know which master and which CD table the PASID should be
installed in.
Right now SVA only works when dma-iommu.c is in control of the RID
translation, which means we have a single iommu_domain shared across the
entire group and that iommu_domain is not shared outside the group.
Critically this means that the iommu_group->devices list and RID's
smmu_domain->devices list describe the same set of masters.
For PCI cases the core code also insists on singleton groups so there is
only one entry in the smmu_domain->devices list that is equal to the
master being passed in to arm_smmu_sva_set_dev_pasid().
Only non-PCI cases may have multi-device groups. However, the core code
will repeat the calls to arm_smmu_sva_set_dev_pasid() across the entire
iommu_group->devices list.
Instead of having arm_smmu_mmu_notifier_get() indirectly loop over all the
devices in the group via the RID's smmu_domain, rely on
__arm_smmu_sva_bind() to be called for each device in the group and
install the repeated CD entry that way.
This avoids taking the spinlock to access the devices list and permits the
arm_smmu_write_ctx_desc() to use a sleeping allocation. Leave the
arm_smmu_mm_release() as a confusing situation, this requires tracking
attached masters inside the SVA domain.
Removing the loop allows arm_smmu_write_ctx_desc() to be called outside
the spinlock and thus is safe to use GFP_KERNEL.
Move the clearing of the CD into arm_smmu_sva_remove_dev_pasid() so that
arm_smmu_mmu_notifier_get/put() remain paired functions.
Fixes: 24503148c5 ("iommu/arm-smmu-v3: Refactor write_ctx_desc")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/4e25d161-0cf8-4050-9aa3-dfa21cd63e56@moroto.mountain/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Link: https://lore.kernel.org/r/0-v3-11978fc67151+112-smmu_cd_atomic_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
As the iommu_report_device_fault() has been converted to auto-respond a
page fault if it fails to enqueue it, there's no need to return a code
in any case. Make it return void.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-17-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iopf_group_response() should return void, as nothing can do anything
with the failure. This implies that ops->page_response() must also return
void; this is consistent with what the drivers do. The failure paths,
which are all integrity validations of the fault, should be WARN_ON'd,
not return codes.
If the iommu core fails to enqueue the fault, it should respond the fault
directly by calling ops->page_response() instead of returning an error
number and relying on the iommu drivers to do so. Consolidate the error
fault handling code in the core.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-16-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add CONFIG_IOMMU_IOPF for page fault handling framework and select it
from its real consumer. Move iopf function declaration from iommu-sva.h
to iommu.h and remove iommu-sva.h as it's empty now.
Consolidate all SVA related code into iommu-sva.c:
- Move iommu_sva_domain_alloc() from iommu.c to iommu-sva.c.
- Move sva iopf handling code from io-pgfault.c to iommu-sva.c.
Consolidate iommu_report_device_fault() and iommu_page_response() into
io-pgfault.c.
Export iopf_free_group() and iopf_group_response() for iopf handlers
implemented in modules. Some functions are renamed with more meaningful
names. No other intentional functionality changes.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-11-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_fault_event and iopf_fault data structures store the same
information about an iopf fault. They are also used in the same way.
Merge these two data structures into a single one to make the code
more concise and easier to maintain.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The individual iommu driver reports the iommu page faults by calling
iommu_report_device_fault(), where a pre-registered device fault handler
is called to route the fault to another fault handler installed on the
corresponding iommu domain.
The pre-registered device fault handler is static and won't be dynamic
as the fault handler is eventually per iommu domain. Replace calling
device fault handler with iommu_queue_iopf().
After this replacement, the registering and unregistering fault handler
interfaces are not needed anywhere. Remove the interfaces and the related
data structures to avoid dead code.
Convert cookie parameter of iommu_queue_iopf() into a device pointer that
is really passed.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No device driver registers fault handler to handle the reported
unrecoveraable faults. Remove it to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Switch all the users of the platform MSI domain over to invoke the new
interfaces which branch to the original platform MSI functions when the
irqdomain associated to the caller device does not yet provide MSI parent
functionality.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-7-apatel@ventanamicro.com
Including:
- Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to
a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
- ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm SMMU
implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
- Intel VT-d driver:
- Cleanup and refactoring
- AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
- Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
- Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
- Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmWecQoACgkQK/BELZcB
GuN5ZxAAzC5QUKAzANx0puk7QhPpKKlbSvj6Q7iRgCLk00KJO1+VQh9v4ouCmXqF
kn3Ko8gddjhtrgwN0OQ54F39cLUrp1SBemy71K5YOR+vu8VKtwtmawZGeeRZ+k+B
Eohw58oaXTiR1maYvoLixLYczLrjklqyJOQ1vZ0GxFGxDqrFByAryHDgG/3OCpJx
C9e6PsLbbfhfqA8Kv97iKcBqniGbXxAMuodqSUG0buQ3oZgfpIP6Bt3EgUzFGPGk
3BTlYxowS/gkjUWd3fgjQFIFLTA01u9FhpA2Jb0a4v67pUCR64YxHN7rBQ6ZChtG
kB9laQfU9re79RsHhqQzr0JT9x/eyq7pzGzjp5TV5TPW6IW+sqjMIPhzd9P08Ef7
BclkCVobx0jSAHOhnnG4QJiKANr2Y2oM3HfsAJccMMY45RRhUKmVqM7jxMPfGn3A
i+inlee73xTjZXJse1EWG1fmKKMLvX9LDEp4DyOfn9CqVT+7hpZvzPjfbGr937Rm
JlwXhF3rQXEpOCagEsbt1vOf+V0e9QiCLf1Y2KpkIkDbE5wwSD/2qLm3tFhJG3oF
fkW+J14Cid0pj+hY0afGe0kOUOIYlimu0nFmSf0pzMH+UktZdKogSfyb1gSDsy+S
rsZRGPFhMJ832ExqhlDfxqBebqh+jsfKynlskui6Td5C9ZULaHA=
=q751
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
commit 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently this is exactly the same as ARM_SMMU_DOMAIN_S2, so just remove
it. The ongoing work to add nesting support through iommufd will do
something a little different.
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
The only caller is arm_smmu_install_ste_for_dev() which never has a NULL
master. Remove the confusing if.
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
Instead of passing a naked __le16 * around to represent a STE wrap it in a
"struct arm_smmu_ste" with an array of the correct size. This makes it
much clearer which functions will comprise the "STE API".
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
In the stall model, invalid transactions were expected to be
stalled and aborted by the IOPF handler.
However, when killing a test case with a huge amount of data, the
accelerator streamline can not stop until all data is consumed
even if the page fault handler reports errors. As a result, the
kill may take a long time, about 10 seconds with numerous iopf
interrupts.
So disable stall for quiet_cd in the non-force stall model, since
force stall model (STALL_MODEL==0b10) requires CD.S must be 1.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Suggested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20231206005727.46150-1-zhangfei.gao@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
A perfect driver would only call dev_iommu_priv_set() from its probe
callback. We've made it functionally correct to call it from the of_xlate
by adding a lock around that call.
lockdep assert that iommu_probe_device_lock is held to discourage misuse.
Exclude PPC kernels with CONFIG_FSL_PAMU turned on because FSL_PAMU uses a
global static for its priv and abuses priv for its domain.
Remove the pointless stores of NULL, all these are on paths where the core
code will free dev->iommu after the op returns.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
mm_get_enqcmd_pasid() should be used by architecture code and closely
related to learn the PASID value that the x86 ENQCMD operation should
use for the mm.
For the moment SMMUv3 uses this without any connection to ENQCMD, it
will be cleaned up similar to how the prior patch made VT-d use the
PASID argument of set_dev_pasid().
The motivation is to replace mm->pasid with an iommu private data
structure that is introduced in a later patch.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231027000525.1278806-4-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some drivers already implement their own defence against the possibility
of being given someone else's device. Since this is now taken care of by
the core code (and via a slightly different path from the original
fwspec-based idea), let's clean them up.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/58a9879ce3f03562bb061e6714fe6efb554c3907.1700589539.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Always allocate a new arm_smmu_bond in __arm_smmu_sva_bind and remove
the bond refcount since arm_smmu_bond can never be shared across calls
to __arm_smmu_sva_bind.
The iommu framework will not allocate multiple SVA domains for the same
(device/mm) pair, nor will it call set_dev_pasid for a device if a
domain is already attached on the given pasid. There's also a one-to-one
mapping between MM and PASID. __arm_smmu_sva_bind is therefore never
called with the same (device/mm) pair, and so there's no reason to try
and normalize allocations of the arm_smmu_bond struct for a (device/mm)
pair across set_dev_pasid.
Signed-off-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230905194849.v1.2.Id3ab7cf665bcead097654937233a645722a4cce3@changeid
Signed-off-by: Will Deacon <will@kernel.org>
cdcfg is a confusing name, especially given other variables with the cfg
suffix in this driver. cd_table more clearly describes what is being
operated on.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Link: https://lore.kernel.org/r/20230915211705.v8.9.I5ee79793b444ddb933e8bc1eb7b77e728d7f8350@changeid
Signed-off-by: Will Deacon <will@kernel.org>
Update the comment to reflect the fact that the STE is not always
installed. arm_smmu_domain_finalise_s1 intentionnaly calls
arm_smmu_write_ctx_desc while the STE is not installed.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20230915211705.v8.8.I7a8beb615e2520ad395d96df94b9ab9708ee0d9c@changeid
Signed-off-by: Will Deacon <will@kernel.org>
Remove unused master parameter now that the CD table is allocated
elsewhere.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20230915211705.v8.7.Iff18df41564b9df82bf40b3ec7af26b87f08ef6e@changeid
Signed-off-by: Will Deacon <will@kernel.org>
With this change, each master will now own its own CD table instead of
sharing one with other masters attached to the same domain. Attaching a
stage 1 domain installs CD entries into the master's CD table. SVA
writes its CD entries into each master's CD table if the domain is
shared across masters.
Also add the device to the devices list before writing the CD to the
table so that SVA will know that the CD needs to be re-written to this
device's CD table as well if it decides to update the CD's ASID
concurrently with this function.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Link: https://lore.kernel.org/r/20230915211705.v8.6.Ice063dcf87d1b777a72e008d9e3406d2bcf6d876@changeid
Signed-off-by: Will Deacon <will@kernel.org>
Update arm_smmu_write_ctx_desc and downstream functions to operate on
a master instead of an smmu domain. We expect arm_smmu_write_ctx_desc()
to only be called to write a CD entry into a CD table owned by the
master. Under the hood, arm_smmu_write_ctx_desc still fetches the CD
table from the domain that is attached to the master, but a subsequent
commit will move that table's ownership to the master.
Note that this change isn't a nop refactor since SVA will call
arm_smmu_write_ctx_desc in a loop for every master the domain is
attached to despite the fact that they all share the same CD table. This
loop may look weird but becomes necessary when the CD table becomes
per-master in a subsequent commit.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20230915211705.v8.5.I219054a6cf538df5bb22f4ada2d9933155d6058c@changeid
Signed-off-by: Will Deacon <will@kernel.org>
A domain can be attached to multiple masters with different
master->stall_enabled values. The stall bit of a CD entry should follow
master->stall_enabled and has an inverse relationship with the
STE.S1STALLD bit.
The stall_enabled bit does not depend on any property of the domain, so
move it out of the arm_smmu_domain struct. Move it to the CD table
struct so that it can fully describe how CD entries should be written to
it.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20230915211705.v8.4.I5aa89c849228794a64146cfe86df21fb71629384@changeid
Signed-off-by: Will Deacon <will@kernel.org>
This is slighlty cleaner: arm_smmu_ctx_desc_cfg is initialized in a
single function instead of having pieces set ahead-of time by its caller.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20230915211705.v8.3.I875254464d044a8ce8b3a2ad6beb655a4a006456@changeid
Signed-off-by: Will Deacon <will@kernel.org>
Remove struct arm_smmu_s1_cfg. This is really just a CD table with a
bit of extra information. Move other attributes of the CD table that
were held there into the existing CD table structure, struct
arm_smmu_ctx_desc_cfg, and replace all usages of arm_smmu_s1_cfg with
arm_smmu_ctx_desc_cfg.
For clarity, use the name "cd_table" for the variables pointing to
arm_smmu_ctx_desc_cfg in the new code instead of cdcfg. A later patch
will make this fully consistent.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20230915211705.v8.2.I1ef1ed19d7786c8176a0d05820c869e650c8d68f@changeid
Signed-off-by: Will Deacon <will@kernel.org>
arm_smmu_s1_cfg (and by extension arm_smmu_domain) owns both a CD table
and the CD inserted into that table's non-pasid CD entry. This limits
arm_smmu_domain's ability to represent non-pasid domains, where multiple
domains need to be inserted into a common CD table. Rather than describing
an STE entry (which may have multiple domains installed into it with
PASID), a domain should describe a single CD entry instead. This is
precisely the role of arm_smmu_ctx_desc. A subsequent commit will also
move the CD table outside of arm_smmu_domain.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20230915211705.v8.1.I67ab103c18d882aedc8a08985af1fba70bca084e@changeid
Signed-off-by: Will Deacon <will@kernel.org>
When running an SVA case, the following soft lockup is triggered:
--------------------------------------------------------------------
watchdog: BUG: soft lockup - CPU#244 stuck for 26s!
pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50
sp : ffff8000d83ef290
x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000
x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000
x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0
x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0
x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a
x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
__arm_smmu_tlb_inv_range+0x118/0x254
arm_smmu_tlb_inv_range_asid+0x6c/0x130
arm_smmu_mm_invalidate_range+0xa0/0xa4
__mmu_notifier_invalidate_range_end+0x88/0x120
unmap_vmas+0x194/0x1e0
unmap_region+0xb4/0x144
do_mas_align_munmap+0x290/0x490
do_mas_munmap+0xbc/0x124
__vm_munmap+0xa8/0x19c
__arm64_sys_munmap+0x28/0x50
invoke_syscall+0x78/0x11c
el0_svc_common.constprop.0+0x58/0x1c0
do_el0_svc+0x34/0x60
el0_svc+0x2c/0xd4
el0t_64_sync_handler+0x114/0x140
el0t_64_sync+0x1a4/0x1a8
--------------------------------------------------------------------
Note that since 6.6-rc1 the arm_smmu_mm_invalidate_range above is renamed
to "arm_smmu_mm_arch_invalidate_secondary_tlbs", yet the problem remains.
The commit 06ff87bae8 ("arm64: mm: remove unused functions and variable
protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur
to SMMU too, since arm_smmu_mm_arch_invalidate_secondary_tlbs() is called
typically next to MMU tlb flush function, e.g.
tlb_flush_mmu_tlbonly {
tlb_flush {
__flush_tlb_range {
// check MAX_TLBI_OPS
}
}
mmu_notifier_arch_invalidate_secondary_tlbs {
arm_smmu_mm_arch_invalidate_secondary_tlbs {
// does not check MAX_TLBI_OPS
}
}
}
Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an
SVA case SMMU uses the CPU page table, so it makes sense to align with the
tlbflush code. Then, replace per-page TLBI commands with a single per-asid
TLBI command, if the request size hits this threshold.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20230920052257.8615-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Although io-pgtable's non-leaf invalidations are always for full tables,
I missed that SVA also uses non-leaf invalidations, while being at the
mercy of whatever range the MMU notifier throws at it. This means it
definitely wants the previous TTL fix as well, since it also doesn't
know exactly which leaf level(s) may need invalidating, but it can also
give us less-aligned ranges wherein certain corners may lead to building
an invalid command where TTL, Num and Scale are all 0. It should be fine
to handle this by over-invalidating an extra page, since falling back to
a non-range command opens up a whole can of errata-flavoured worms.
Fixes: 6833b8f2e1 ("iommu/arm-smmu-v3: Set TTL invalidation hint better")
Reported-by: Rui Zhu <zhurui3@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b99cfe71af2bd93a8a2930f20967fb2a4f7748dd.1694432734.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
There are two main use cases for mmu notifiers. One is by KVM which uses
mmu_notifier_invalidate_range_start()/end() to manage a software TLB.
The other is to manage hardware TLBs which need to use the
invalidate_range() callback because HW can establish new TLB entries at
any time. Hence using start/end() can lead to memory corruption as these
callbacks happen too soon/late during page unmap.
mmu notifier users should therefore either use the start()/end() callbacks
or the invalidate_range() callbacks. To make this usage clearer rename
the invalidate_range() callback to arch_invalidate_secondary_tlbs() and
update documention.
Link: https://lkml.kernel.org/r/6f77248cd25545c8020a54b4e567e8b72be4dca1.1690292440.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolin Chen <nicolinc@nvidia.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zhi Wang <zhi.wang.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Invalidate secondary IOMMU TLB on permission upgrade", v4.
The main change is to move secondary TLB invalidation mmu notifier
callbacks into the architecture specific TLB flushing functions. This
makes secondary TLB invalidation mostly match CPU invalidation while
still allowing efficient range based invalidations based on the
existing TLB batching code.
This patch (of 5):
The ARM SMMU has a specific command for invalidating the TLB for an entire
ASID. Currently this is used for the IO_PGTABLE API but not for ATS when
called from the MMU notifier.
The current implementation of notifiers does not attempt to invalidate
such a large address range, instead walking each VMA and invalidating each
range individually during mmap removal. However in future SMMU TLB
invalidations are going to be sent as part of the normal flush_tlb_*()
kernel calls. To better deal with that add handling to use TLBI ASID when
invalidating the entire address space.
Link: https://lkml.kernel.org/r/cover.1eca029b8603ef4eebe5b41eae51facfc5920c41.1690292440.git-series.apopple@nvidia.com
Link: https://lkml.kernel.org/r/ba5f0ec5fbc2ab188797524d3687e075e2412a2b.1690292440.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolin Chen <nicolinc@nvidia.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zhi Wang <zhi.wang.linux@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
PCIe Process address space ID (PASID) is used to tag DMA traffic, it
provides finer grained isolation than requester ID (RID).
For each device/RID, 0 is a special PASID for the normal DMA (no
PASID). This is universal across all architectures that supports PASID,
therefore warranted to be reserved globally and declared in the common
header. Consequently, we can avoid the conflict between different PASID
use cases in the generic code. e.g. SVA and DMA API with PASIDs.
This paved away for device drivers to choose global PASID policy while
continue doing normal DMA.
Noting that VT-d could support none-zero RID/NO_PASID, but currently not
used.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-2-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For current implementation of vmid allocation of arm smmu-v3, a per-smmu
devide bitmap of 64K bits(8K bytes) is allocated on behalf of possible VMID
range, which is two pages for some architectures. Besides that, its memory
consumption is 'static', despite of how many VMIDs are allocated actually.
That's memory inefficient and lack of scalability.
So an IDA based implementation is introduced to address this issue, which
is capable of self-expanding on the actual need of VMID allocation.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/TYCP286MB2323E0C525FF9F94E3B07C7ACA35A@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Will Deacon <will@kernel.org>
When io-pgtable unmaps a whole table, rather than waste time walking it
to find the leaf entries to invalidate exactly, it simply expects
.tlb_flush_walk with nominal last-level granularity to invalidate any
leaf entries at higher intermediate levels as well. This works fine with
page-based invalidation, but with range commands we need to be careful
with the TTL hint - unconditionally setting it based on the given level
3 granule means that an invalidation for a level 1 table would strictly
not be required to affect level 2 block entries. It's easy to comply
with the expected behaviour by simply not setting the TTL hint for
non-leaf invalidations, so let's do that.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b409d9a17c52dc0db51faee91d92737bb7975f5b.1685637456.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Both MMU-600 and MMU-700 have similar errata around TLB invalidation
while both stages of translation are active, which will need some
consideration once nesting support is implemented. For now, though,
it's very easy to make our implicit lack of nesting support explicit
for those cases, so they're less likely to be missed in future.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/696da78d32bb4491f898f11b0bb4d850a8aa7c6a.1683731256.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In certain cases we may want to refuse to allow nested translation even
when both stages are implemented, so let's add an explicit feature for
nesting support which we can control in its own right. For now this
merely serves as documentation, but it means a nice convenient check
will be ready and waiting for the future nesting code.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/136c3f4a3a84cc14a5a1978ace57dfd3ed67b688.1683731256.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To work around MMU-700 erratum 2812531 we need to ensure that certain
sequences of commands cannot be issued without an intervening sync. In
practice this falls out of our current command-batching machinery
anyway - each batch only contains a single type of invalidation command,
and ends with a sync. The only exception is when a batch is sufficiently
large to need issuing across multiple command queue slots, wherein the
earlier slots will not contain a sync and thus may in theory interleave
with another batch being issued in parallel to create an affected
sequence across the slot boundary.
Since MMU-700 supports range invalidate commands and thus we will prefer
to use them (which also happens to avoid conditions for other errata),
I'm not entirely sure it's even possible for a single high-level
invalidate call to generate a batch of more than 63 commands, but for
the sake of robustness and documentation, wire up an option to enforce
that a sync is always inserted for every slot issued.
The other aspect is that the relative order of DVM commands cannot be
controlled, so DVM cannot be used. Again that is already the status quo,
but since we have at least defined ARM_SMMU_FEAT_BTM, we can explicitly
disable it for documentation purposes even if it's not wired up anywhere
yet.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/330221cdfd0003cd51b6c04e7ff3566741ad8374.1683731256.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
MMU-600 versions prior to r1p0 fail to correctly generate a WFE wakeup
event when the command queue transitions fom full to non-full. We can
easily work around this by simply hiding the SEV capability such that we
fall back to polling for space in the queue - since MMU-600 implements
MSIs we wouldn't expect to need SEV for sync completion either, so this
should have little to no impact.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/08adbe3d01024d8382a478325f73b56851f76e49.1683731256.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
It remains really handy to have distinct DMA domain types within core
code for the sake of default domain policy selection, but we can now
hide that detail from drivers by using the new capability instead.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com> # amd, intel, smmu-v3
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1c552d99e8ba452bdac48209fa74c0bdd52fd9d9.1683233867.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Passing a special type to domain_alloc to indirectly query whether flush
queues are a worthwhile optimisation with the given driver is a bit
clunky, and looking increasingly anachronistic. Let's put that into an
explicit capability instead.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com> # amd, intel, smmu-v3
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/f0086a93dbccb92622e1ace775846d81c1c4b174.1683233867.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=OvTo
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230321084125.337021-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When an overflow occurs in the PRI queue, the SMMU toggles the overflow
flag in the PROD register. To exit the overflow condition, the PRI thread
is supposed to acknowledge it by toggling this flag in the CONS register.
Unacknowledged overflow causes the queue to stop adding anything new.
Currently, the priq thread always writes the CONS register back to the
SMMU after clearing the queue.
The writeback is not necessary if the OVFLG in the PROD register has not
been changed, no overflow has occured.
This commit checks the difference of the overflow flag between CONS and
PROD register. If it's different, toggles the OVACKFLG flag in the CONS
register and write it to the SMMU.
The situation is similar for the event queue.
The acknowledge register is also toggled after clearing the event
queue but never propagated to the hardware. This would only be done the
next time when executing evtq thread.
Unacknowledged event queue overflow doesn't affect the event
queue, because the SMMU still adds elements to that queue when the
overflow condition is active.
But it feel nicer to keep SMMU in sync when possible, so use the same
way here as well.
Signed-off-by: Tomas Krcka <krckatom@amazon.de>
Link: https://lore.kernel.org/r/20230329123420.34641-1-tomas.krcka@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Similar to SMMUv2, this driver calls iommu_device_unregister() from the
shutdown path, which removes the IOMMU groups with no coordination
whatsoever with their users - shutdown methods are optional in device
drivers. This can lead to NULL pointer dereferences in those drivers'
DMA API calls, or worse.
Instead of calling the full arm_smmu_device_remove() from
arm_smmu_device_shutdown(), let's pick only the relevant function call -
arm_smmu_device_disable() - more or less the reverse of
arm_smmu_device_reset() - and call just that from the shutdown path.
Fixes: 57365a04c9 ("iommu: Move bus setup to IOMMU device registration")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221215141251.3688780-2-vladimir.oltean@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
This series is to replace the previous EMEDIUMTYPE patch in a VFIO series:
https://lore.kernel.org/kvm/Yxnt9uQTmbqul5lf@8bytes.org/
The purpose is to regulate all existing ->attach_dev callback functions to
use EINVAL exclusively for an incompatibility error between a device and a
domain. This allows VFIO and IOMMUFD to detect such a soft error, and then
try a different domain with the same device.
Among all the patches, the first two are preparatory changes. And then one
patch to update kdocs and another three patches for the enforcement
effort.
Link: https://lore.kernel.org/r/cover.1666042872.git.nicolinc@nvidia.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY2JjUQAKCRCFwuHvBreF
YaFbAP492zvOEaZaRxiK4XcdsU1ZBCovB/2Keh/QIQdb7Ig6hgD/dW7TygTP1+4a
Oqpcu/6aLeHvhayfZt1142S3e0HuHwU=
=g5C+
-----END PGP SIGNATURE-----
Merge tag 'for-joerg' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd into core
iommu: Define EINVAL as device/domain incompatibility
This series is to replace the previous EMEDIUMTYPE patch in a VFIO series:
https://lore.kernel.org/kvm/Yxnt9uQTmbqul5lf@8bytes.org/
The purpose is to regulate all existing ->attach_dev callback functions to
use EINVAL exclusively for an incompatibility error between a device and a
domain. This allows VFIO and IOMMUFD to detect such a soft error, and then
try a different domain with the same device.
Among all the patches, the first two are preparatory changes. And then one
patch to update kdocs and another three patches for the enforcement
effort.
Link: https://lore.kernel.org/r/cover.1666042872.git.nicolinc@nvidia.com
Rename iommu-sva-lib.c[h] to iommu-sva.c[h] as it contains all code
for SVA implementation in iommu core.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-14-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These ops'es have been deprecated. There's no need for them anymore.
Remove them to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-11-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add support for SVA domain allocation and provide an SVA-specific
iommu_domain_ops. This implementation is based on the existing SVA
code. Possible cleanup and refactoring are left for incremental
changes later.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20221031005917.45690-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current kernel DMA with PASID support is based on the SVA with a flag
SVM_FLAG_SUPERVISOR_MODE. The IOMMU driver binds the kernel memory address
space to a PASID of the device. The device driver programs the device with
kernel virtual address (KVA) for DMA access. There have been security and
functional issues with this approach:
- The lack of IOTLB synchronization upon kernel page table updates.
(vmalloc, module/BPF loading, CONFIG_DEBUG_PAGEALLOC etc.)
- Other than slight more protection, using kernel virtual address (KVA)
has little advantage over physical address. There are also no use
cases yet where DMA engines need kernel virtual addresses for in-kernel
DMA.
This removes SVM_FLAG_SUPERVISOR_MODE support from the IOMMU interface.
The device drivers are suggested to handle kernel DMA with PASID through
the kernel DMA APIs.
The drvdata parameter in iommu_sva_bind_device() and all callbacks is not
needed anymore. Cleanup them as well.
Link: https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use this field to keep the number of supported PASIDs that an IOMMU
hardware is able to support. This is a generic attribute of an IOMMU
and lifting it into the per-IOMMU device structure makes it possible
to allocate a PASID for device without calls into the IOMMU drivers.
Any iommu driver that supports PASID related features should set this
field before enabling them on the devices.
In the Intel IOMMU driver, intel_iommu_sm is moved to CONFIG_INTEL_IOMMU
enclave so that the pasid_supported() helper could be used in dmar.c
without compilation errors.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Following the new rules in include/linux/iommu.h kdocs, update all drivers
->attach_dev callback functions to return EINVAL in the failure paths that
are related to domain incompatibility.
Also, drop adjacent error prints to prevent a kernel log spam.
Link: https://lore.kernel.org/r/f52a07f7320da94afe575c9631340d0019a203a7.1666042873.git.nicolinc@nvidia.com
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add gfp parameter to iommu_alloc_resv_region() for the callers to specify
the memory allocation behavior. Thus iommu_alloc_resv_region() could also
be available in critical contexts.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- Removal of the bus_set_iommu() interface which became
unnecesary because of IOMMU per-device probing
- Make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- Support for AMD IOMMUv2 page-tables for the DMA-API layer. The
v2 page-tables are compatible with the x86 CPU page-tables.
Using them for DMA-API prepares support for hardware-assisted
IOMMU virtualization
- Support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- Some smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=h0sT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
For some reason we refer to ID_AA64MMFR0_EL1.ASIDBits as ASID. Add BITS
into the name, bringing the naming into sync with DDI0487H.a. Due to the
large amount of MixedCase in this register which isn't really consistent
with either the kernel style or the majority of the architecture the use of
upper case is preserved. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-10-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64MMFR0_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The DMA operations of HiSilicon PTT device can only work properly with
identical mappings. So add a quirk for the device to force the domain
as passthrough.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220816114414.4092-2-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Assuming that any SMMU can enforce coherency for any device is clearly
nonsense. Although technically even a single SMMU instance can be wired
up to only be capable of emitting coherent traffic for some of the
devices it translates, it's a fairly realistic approximation that if the
SMMU's pagetable walker is wired up to a coherent interconnect then all
its translation units probably are too, and conversely that lack of
coherent table walks implies a non-coherent system in general. Either
way it's still less inaccurate than what we've been claiming so far.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/106c9741415f0b6358c72d53ae9c78c553a2b45c.1660574547.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With all callers now converted to the device-specific version, retire
the old bus-based interface, and give drivers the chance to indicate
accurate per-instance capabilities.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/d8bd8777d06929ad8f49df7fc80e1b9af32a41b5.1660574547.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fold the arm_smmu_dev_has_feature arm_smmu_dev_feature_enabled into
the main methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220708080616.238833-5-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All drivers that implement get_resv_regions just use
generic_put_resv_regions to implement the put side. Remove the
indirections and document the allocations constraints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220708080616.238833-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This method is never actually called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220708080616.238833-2-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since .release_device is now called through per-device ops, any call
which gets as far as a driver definitely *is* for that driver, for a
device which has successfully passed .probe_device, so all the checks to
that effect are now redundant and can be removed. In the same vein we
can also skip freeing fwspecs which are now managed by core code.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/02671dbfad7a3343fc25a44222350efcb455fe3c.1655822151.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Check if there is any RMR info associated with the devices behind
the SMMUv3 and if any, install bypass STEs for them. This is to
keep any ongoing traffic associated with these devices alive
when we enable/reset SMMUv3 during probe().
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220615101044.1972-9-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
By default, disable_bypass flag is set and any dev without
an iommu domain installs STE with CFG_ABORT during
arm_smmu_init_bypass_stes(). Introduce a "force" flag and
move the STE update logic to arm_smmu_init_bypass_stes()
so that we can force it to install CFG_BYPASS STE for specific
SIDs.
This will be useful in a follow-up patch to install bypass
for IORT RMR SIDs.
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220615101044.1972-8-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce a helper to check the sid range and to init the l2 strtab
entries(bypass). This will be useful when we have to initialize the
l2 strtab with bypass for RMR SIDs.
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220615101044.1972-7-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
