Process pagetables may now be using new permission-indirection-based
features which an SMMU may not understand when given such a table for
SVA. Although SMMUv3.4 does add its own S1PIE feature, realistically
we're still going to have to cope with feature mismatches between CPUs
and SMMUs, so let's start simple and essentially just document the
expectations for what falls out as-is. Although it seems unlikely for
SVA applications to also depend on memory-hardening features, or
vice-versa, the relative lifecycles make it tricky to enforce mutual
exclusivity. Thankfully our PIE index allocation makes it relatively
benign for an SMMU to keep interpreting them as direct permissions, the
only real implication is that an SVA application cannot harden itself
against its own devices with these features. Thus, inform the user about
that just in case they have other expectations.
Also we don't (yet) support LPA2, so deny SVA entirely if we're going to
misunderstand the pagetable format altogether.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/68a37b00a720f0827cac0e4f40e4d3a688924054.1733406275.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
kmemleak noticed that the iopf queue allocated deep down within
arm_smmu_init_structures() can be leaked by a subsequent error return
from arm_smmu_device_probe(). Furthermore, after arm_smmu_device_reset()
we will also leave the SMMU enabled with an empty Stream Table, silently
blocking all DMA. This proves rather annoying for debugging said probe
failure, so let's handle it a bit better by putting the SMMU back into
(more or less) the same state as if it hadn't probed at all.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5137901958471cf67f2fad5c2229f8a8f1ae901a.1733406914.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Relying on the driver list was a cute idea for minimising the scope of
our SMMU device lookups, however it turns out to have a subtle flaw. The
SMMU device only gets added to that list after arm_smmu_device_probe()
returns success, so there's actually no way the iommu_device_register()
call from there could ever work as intended, even if it wasn't already
hampered by the fwspec setup not happening early enough.
Switch both arm_smmu_get_by_fwnode() implementations to use a platform
bus lookup instead, which *will* reliably work. Also make sure that we
don't register SMMUv2 instances until we've fully initialised them, to
avoid similar consequences of the lookup now finding a device with no
drvdata. Moving the error returns is also a perfect excuse to streamline
them with dev_err_probe() in the process.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/6d7ce1dc31873abdb75c895fb8bd2097cce098b4.1733406914.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The SMMUv3 spec has a note that BYPASS and ATS don't work together under
the STE EATS field definition. However there is another section "13.6.4
Full ATS skipping stage 1" that explains under certain conditions BYPASS
and ATS do work together if the STE is using S1DSS to select BYPASS and
the CD table has the possibility for a substream.
When these comments were written the understanding was that all forms of
BYPASS just didn't work and this was to be a future problem to solve.
It turns out that ATS and IDENTITY will always work just fine:
- If STE.Config = BYPASS then the PCI ATS is disabled
- If a PASID domain is attached then S1DSS = BYPASS and ATS will be
enabled. This meets the requirements of 13.6.4 to automatically
generate 1:1 ATS replies on the RID.
Update the comments to reflect this.
Fixes: 7497f4211f ("iommu/arm-smmu-v3: Make changing domains be hitless for ATS")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-f27174f44f39+27a33-smmuv3_ats_note_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, the driver dumps the raw hex for a received event record.
Improve this by leveraging `struct arm_smmu_event` for event fields
and log human-readable event records with meaningful information.
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20241203184906.2264528-3-praan@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Introduce `struct arm_smmu_event` to represent event records.
Parse out relevant fields from raw event records for ease and
use the new `struct arm_smmu_event` instead.
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20241203184906.2264528-2-praan@google.com
Signed-off-by: Will Deacon <will@kernel.org>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the main domain allocating path is calling this function it
doesn't make sense to leave it named _user. Change the name to
alloc_paging_flags() to mirror the new iommu_paging_domain_alloc_flags()
function.
A driver should implement only one of ops->domain_alloc_paging() or
ops->domain_alloc_paging_flags(). The former is a simpler interface with
less boiler plate that the majority of drivers use. The latter is for
drivers with a greater feature set (PASID, multiple page table support,
advanced iommufd support, nesting, etc). Additional patches will be needed
to achieve this.
Link: https://patch.msgid.link/r/2-v1-c252ebdeb57b+329-iommu_paging_flags_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Including:
- Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function.
- Introduce iommu_paging_domain_alloc_flags().
- Extend support for allocating PASID-capable domains to more
drivers.
- Remove iommu_present().
- Some smaller improvements.
- New IOMMU driver for RISC-V.
- Intel VT-d Updates:
- Add domain_alloc_paging support.
- Enable user space IOPFs in non-PASID and non-svm cases.
- Small code refactoring and cleanups.
- Add domain replacement support for pasid.
- AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default.
- Replace custom domain ID allocator with IDA allocator.
- Add ops->release_domain() support.
- Other improvements to device attach and domain allocation code
paths.
- ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their SMMU.
- Devicetree binding updates for Qualcomm MMU-500 implementations.
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue driver.
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage.
- Remove unused block-splitting support.
- S390 IOMMU:
- Implement support for blocking domain.
- Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186.
- OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver.
-----BEGIN PGP SIGNATURE-----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=V9hb
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iommu/linux into iommufd.git
Merge with Joerg's tree for dependencies on the next patches.
======================================
IOMMU Updates for Linux v6.13:
Including:
- Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function.
- Introduce iommu_paging_domain_alloc_flags().
- Extend support for allocating PASID-capable domains to more
drivers.
- Remove iommu_present().
- Some smaller improvements.
- New IOMMU driver for RISC-V.
- Intel VT-d Updates:
- Add domain_alloc_paging support.
- Enable user space IOPFs in non-PASID and non-svm cases.
- Small code refactoring and cleanups.
- Add domain replacement support for pasid.
- AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default.
- Replace custom domain ID allocator with IDA allocator.
- Add ops->release_domain() support.
- Other improvements to device attach and domain allocation code
paths.
- ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their SMMU.
- Devicetree binding updates for Qualcomm MMU-500 implementations.
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue driver.
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage.
- Remove unused block-splitting support.
- S390 IOMMU:
- Implement support for blocking domain.
- Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186.
- OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver.
======================================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit 69d9b312f3 ("iommu/arm-smmu-v3: Support IOMMU_VIOMMU_ALLOC")
started using _iommufd_object_alloc() without importing the IOMMUFD
module namespace, resulting in a modpost warning:
WARNING: modpost: module arm_smmu_v3 uses symbol _iommufd_object_alloc from namespace IOMMUFD, but does not import it.
Commit d68beb276b ("iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE
using a VIOMMU object") added another warning by using
iommufd_viommu_find_dev():
WARNING: modpost: module arm_smmu_v3 uses symbol iommufd_viommu_find_dev from namespace IOMMUFD, but does not import it.
Import the IOMMUFD module namespace to resolve the warnings.
Fixes: 69d9b312f3 ("iommu/arm-smmu-v3: Support IOMMU_VIOMMU_ALLOC")
Link: https://patch.msgid.link/r/20241114-arm-smmu-v3-import-iommufd-module-ns-v1-1-c551e7b972e9@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement the vIOMMU's cache_invalidate op for user space to invalidate
the IOTLB entries, Device ATS and CD entries that are cached by hardware.
Add struct iommu_viommu_arm_smmuv3_invalidate defining invalidation
entries that are simply in the native format of a 128-bit TLBI
command. Scan those commands against the permitted command list and fix
their VMID/SID fields to match what is stored in the vIOMMU.
Link: https://patch.msgid.link/r/12-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Co-developed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The EATS flag needs to flow through the vSTE and into the pSTE, and ensure
physical ATS is enabled on the PCI device.
The physical ATS state must match the VM's idea of EATS as we rely on the
VM to issue the ATS invalidation commands. Thus ATS must remain off at the
device until EATS on a nesting domain turns it on. Attaching a nesting
domain is the point where the invalidation responsibility transfers to
userspace.
Update the ATS logic to track EATS for nesting domains and flush the
ATC whenever the S2 nesting parent changes.
Link: https://patch.msgid.link/r/11-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Force Write Back (FWB) changes how the S2 IOPTE's MemAttr field
works. When S2FWB is supported and enabled the IOPTE will force cachable
access to IOMMU_CACHE memory when nesting with a S1 and deny cachable
access when !IOMMU_CACHE.
When using a single stage of translation, a simple S2 domain, it doesn't
change things for PCI devices as it is just a different encoding for the
existing mapping of the IOMMU protection flags to cachability attributes.
For non-PCI it also changes the combining rules when incoming transactions
have inconsistent attributes.
However, when used with a nested S1, FWB has the effect of preventing the
guest from choosing a MemAttr in it's S1 that would cause ordinary DMA to
bypass the cache. Consistent with KVM we wish to deny the guest the
ability to become incoherent with cached memory the hypervisor believes is
cachable so we don't have to flush it.
Allow NESTED domains to be created if the SMMU has S2FWB support and use
S2FWB for NESTING_PARENTS. This is an additional option to CANWBS.
Link: https://patch.msgid.link/r/10-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For SMMUv3 a IOMMU_DOMAIN_NESTED is composed of a S2 iommu_domain acting
as the parent and a user provided STE fragment that defines the CD table
and related data with addresses translated by the S2 iommu_domain.
The kernel only permits userspace to control certain allowed bits of the
STE that are safe for user/guest control.
IOTLB maintenance is a bit subtle here, the S1 implicitly includes the S2
translation, but there is no way of knowing which S1 entries refer to a
range of S2.
For the IOTLB we follow ARM's guidance and issue a CMDQ_OP_TLBI_NH_ALL to
flush all ASIDs from the VMID after flushing the S2 on any change to the
S2.
The IOMMU_DOMAIN_NESTED can only be created from inside a VIOMMU as the
invalidation path relies on the VIOMMU to translate virtual stream ID used
in the invalidation commands for the CD table and ATS.
Link: https://patch.msgid.link/r/9-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new driver-type for ARM SMMUv3 to enum iommu_viommu_type. Implement
an arm_vsmmu_alloc().
As an initial step, copy the VMID from s2_parent. A followup series is
required to give the VIOMMU object it's own VMID that will be used in all
nesting configurations.
Link: https://patch.msgid.link/r/8-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When configuring a kernel with PAGE_SIZE=4KB, depending on its setting of
CONFIG_CMA_ALIGNMENT, VCMDQ_LOG2SIZE_MAX=19 could fail the alignment test
and trigger a WARN_ON:
WARNING: at drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:3646
Call trace:
arm_smmu_init_one_queue+0x15c/0x210
tegra241_cmdqv_init_structures+0x114/0x338
arm_smmu_device_probe+0xb48/0x1d90
Fix it by capping max_n_shift to CMDQ_MAX_SZ_SHIFT as SMMUv3 CMDQ does.
Fixes: 918eb5c856 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20241111030226.1940737-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
set_dev_pasid() op is going to be enhanced to support domain replacement
of a pasid. This prepares for this op definition.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-13-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support domain replacement for pasid, the underlying iommu driver needs
to know the old domain hence be able to clean up the existing attachment.
It would be much convenient for iommu layer to pass down the old domain.
Otherwise, iommu drivers would need to track domain for pasids by
themselves, this would duplicate code among the iommu drivers. Or iommu
drivers would rely group->pasid_array to get domain, which may not always
the correct one.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-2-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The arm-smmuv3-iommufd.c file will need to call these functions too.
Remove statics and put them in the header file. Remove the kunit
visibility protections from arm_smmu_make_abort_ste() and
arm_smmu_make_s2_domain_ste().
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
For SMMUv3 the parent must be a S2 domain, which can be composed
into a IOMMU_DOMAIN_NESTED.
In future the S2 parent will also need a VMID linked to the VIOMMU and
even to KVM.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
For virtualization cases the IDR/IIDR/AIDR values of the actual SMMU
instance need to be available to the VMM so it can construct an
appropriate vSMMUv3 that reflects the correct HW capabilities.
For userspace page tables these values are required to constrain the valid
values within the CD table and the IOPTEs.
The kernel does not sanitize these values. If building a VMM then
userspace is required to only forward bits into a VM that it knows it can
implement. Some bits will also require a VMM to detect if appropriate
kernel support is available such as for ATS and BTM.
Start a new file and kconfig for the advanced iommufd support. This lets
it be compiled out for kernels that are not intended to support
virtualization, and allows distros to leave it disabled until they are
shipping a matching qemu too.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
HW with CANWBS is always cache coherent and ignores PCI No Snoop requests
as well. This meets the requirement for IOMMU_CAP_ENFORCE_CACHE_COHERENCY,
so let's return it.
Implement the enforce_cache_coherency() op to reject attaching devices
that don't have CANWBS.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This control causes the ARM SMMU drivers to choose a stage 2
implementation for the IO pagetable (vs the stage 1 usual default),
however this choice has no significant visible impact to the VFIO
user. Further qemu never implemented this and no other userspace user is
known.
The original description in commit f5c9ecebaf ("vfio/iommu_type1: add
new VFIO_TYPE1_NESTING_IOMMU IOMMU type") suggested this was to "provide
SMMU translation services to the guest operating system" however the rest
of the API to set the guest table pointer for the stage 1 and manage
invalidation was never completed, or at least never upstreamed, rendering
this part useless dead code.
Upstream has now settled on iommufd as the uAPI for controlling nested
translation. Choosing the stage 2 implementation should be done by through
the IOMMU_HWPT_ALLOC_NEST_PARENT flag during domain allocation.
Remove VFIO_TYPE1_NESTING_IOMMU and everything under it including the
enable_nesting iommu_domain_op.
Just in-case there is some userspace using this continue to treat
requesting it as a NOP, but do not advertise support any more.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
While testing some io-pgtable changes, I ran into a compiler warning
from the Tegra CMDQ driver:
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:803:23: warning: unused variable 'cmdqv_debugfs_dir' [-Wunused-variable]
803 | static struct dentry *cmdqv_debugfs_dir;
| ^~~~~~~~~~~~~~~~~
1 warning generated.
Guard the variable declaration with CONFIG_IOMMU_DEBUGFS to silence the
warning.
Signed-off-by: Will Deacon <will@kernel.org>
Core layer is modified to call domain_alloc_user() to allocate PASID
capable domain. Enhance arm_smmu_domain_alloc_user() to allocate
PASID capable domain based on the 'flags' parameter.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241028093810.5901-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Fixes: e3b1be2e73 ("iommu/arm-smmu-v3: Reorganize struct arm_smmu_ctx_desc_cfg")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240923021557.3432068-1-nichen@iscas.ac.cn
Signed-off-by: Will Deacon <will@kernel.org>
The function arm_smmu_init_strtab_2lvl uses the expression
((1 << smmu->sid_bits) - 1)
to calculate the largest StreamID value. However, this fails for the
maximum allowed value of SMMU_IDR1.SIDSIZE which is 32. The C standard
states:
"If the value of the right operand is negative or is greater than or
equal to the width of the promoted left operand, the behavior is
undefined."
With smmu->sid_bits being 32, the prerequisites for undefined behavior
are met. We observed that the value of (1 << 32) is 1 and not 0 as we
initially expected.
Similar bit shift operations in arm_smmu_init_strtab_linear seem to not
be affected, because it appears to be unlikely for an SMMU to have
SMMU_IDR1.SIDSIZE set to 32 but then not support 2-level Stream tables
This issue was found by Ryan Huang <tzukui@google.com> on our team.
Fixes: ce410410f1 ("iommu/arm-smmu-v3: Add arm_smmu_strtab_l1/2_idx()")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://lore.kernel.org/r/20241002015357.1766934-1-danielmentz@google.com
Signed-off-by: Will Deacon <will@kernel.org>
The members here are being used for both the linear and the 2 level case,
with the meaning of each item slightly different in the two cases.
Split it into a clean union where both cases have their own struct with
their own logical names and correct types.
Adjust all the users to detect linear/2lvl and use the right sub structure
and types consistently.
Remove CTXDESC_CD_DWORDS by changing the last places to use
sizeof(struct arm_smmu_cd).
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
As well as indexing helpers arm_smmu_cdtab_l1/2_idx().
Remove CTXDESC_L1_DESC_DWORDS and CTXDESC_CD_DWORDS replacing them all
with type specific calculations.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The top of the 2 level CD table is (at most) 1024 entries big, and two
high order allocations are required. One of __le64 which is programmed
into the HW (8k) and one of struct arm_smmu_l1_ctx_desc which holds the
CPU pointer (16k).
There are two copies of the l2ptr_dma, one is stored in the struct
arm_smmu_l1_ctx_desc, and another is encoded in the __le64 for the HW to
use. Instead of storing two copies just decode the value from the __le64.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The master->cd_table is entirely contained within the struct
arm_smmu_master which is guaranteed to be freed by the core code under
arm_smmu_release_device().
There is no reason to use devm here, arm_smmu_free_cd_tables() is reliably
called to free the CD related memory. Remove it and save some memory.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
These values can be computed from the other values already stored in the
config. Move the calculation to arm_smmu_write_strtab() and do it directly
before writing the registers.
This moves all the logic to calculate the two registers into one function
from three and saves an unimportant 16 bytes from the arm_smmu_device.
Suggested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The members here are being used for both the linear and the 2 level case,
with the meaning of each item slightly different in the two cases.
Split it into a clean union where both cases have their own struct with
their own logical names and correct types.
Adjust all the users to detect linear/2lvl and use the right sub structure
and types consistently.
Remove STRTAB_STE_DWORDS by changing the last places to use
sizeof(struct arm_smmu_ste).
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Add types struct arm_smmu_strtab_l1 and l2 to represent the HW layout of
the descriptors, and use them in most places, following patches will get
the remaing places. The size of the l1 and l2 HW allocations are
sizeof(struct arm_smmu_strtab_l1/2).
This provides some more clarity than having raw __le64 *'s and sizes
computed via macros.
Remove STRTAB_L1_DESC_DWORDS.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Don't open code the calculations of the indexes for each level, provide
two functions to do that math and call them in all the places. Update all
the places computing indexes.
Calculate the L1 table size directly based on the max required index from
the cap. Remove STRTAB_L1_SZ_SHIFT in favour of STRTAB_NUM_L2_STES.
Use STRTAB_NUM_L2_STES to replace remaining open coded 1 << STRTAB_SPLIT.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Since v5.12 the rbtree has gained some simplifying helpers aimed at making
rb tree users write less convoluted boiler plate code. Instead the caller
provides a single comparison function and the helpers generate the prior
open-coded stuff.
Update smmu->streams to use rb_find_add() and rb_find().
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-9fef8cdc2ff6+150d1-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
It's observed that, when the first 4GB of system memory was reserved, all
VCMDQ allocations failed (even with the smallest qsz in the last attempt):
arm-smmu-v3: found companion CMDQV device: NVDA200C:00
arm-smmu-v3: option mask 0x10
arm-smmu-v3: failed to allocate queue (0x8000 bytes) for vcmdq0
acpi NVDA200C:00: tegra241_cmdqv: Falling back to standard SMMU CMDQ
arm-smmu-v3: ias 48-bit, oas 48-bit (features 0x001e1fbf)
arm-smmu-v3: allocated 524288 entries for cmdq
arm-smmu-v3: allocated 524288 entries for evtq
arm-smmu-v3: allocated 524288 entries for priq
This is because the 4GB reserved memory shifted the entire DMA zone from a
lower 32-bit range (on a system without the 4GB carveout) to higher range,
while the dev->coherent_dma_mask was set to DMA_BIT_MASK(32) by default.
The dma_set_mask_and_coherent() call is done in arm_smmu_device_hw_probe()
of the SMMU driver. So any DMA allocation from tegra241_cmdqv_probe() must
wait until the coherent_dma_mask is correctly set.
Move the vintf/vcmdq structure initialization routine into a different op,
"init_structures". Call it at the end of arm_smmu_init_structures(), where
standard SMMU queues get allocated.
Most of the impl_ops aren't ready until vintf/vcmdq structure are init-ed.
So replace the full impl_ops with an init_ops in __tegra241_cmdqv_probe().
And switch to tegra241_cmdqv_impl_ops later in arm_smmu_init_structures().
Note that tegra241_cmdqv_impl_ops does not link to the new init_structures
op after this switch, since there is no point in having it once it's done.
Fixes: 918eb5c856 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Reported-by: Matt Ochs <mochs@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/530993c3aafa1b0fc3d879b8119e13c629d12e2b.1725503154.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The ioremap() function doesn't return error pointers, it returns NULL
on error so update the error handling. Also just return directly
instead of calling iounmap() on the NULL pointer. Calling
iounmap(NULL) doesn't cause a problem on ARM but on other architectures
it can trigger a warning so it'a bad habbit.
Fixes: 918eb5c856 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/5a6c1e9a-0724-41b1-86d4-36335d3768ea@stanley.mountain
Signed-off-by: Will Deacon <will@kernel.org>
Kernel test robot reported a few trucation warnings at the snprintf:
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:
In function ‘tegra241_vintf_free_lvcmdq’:
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:239:56:
warning: ‘%u’ directive output may be truncated writing between 1 and
5 bytes into a region of size between 3 and 11 [-Wformat-truncation=]
239 | snprintf(header, hlen, "VINTF%u: VCMDQ%u/LVCMDQ%u: ",
| ^~
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:239:32: note: directive argument
in the range [0, 65535]
239 | snprintf(header, hlen, "VINTF%u: VCMDQ%u/LVCMDQ%u: ",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:239:9: note: ‘snprintf’ output
between 25 and 37 bytes into a destination of size 32
239 | snprintf(header, hlen, "VINTF%u: VCMDQ%u/LVCMDQ%u: ",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
240 | vcmdq->vintf->idx, vcmdq->idx, vcmdq->lidx);
Fix by bumping up the size of the header to hold more characters.
Fixes: 918eb5c856 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409020406.7ed5uojF-lkp@intel.com/
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20240902055745.629456-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
At the moment, the SMMUv3 unit tests assume ATS is always enabled,
although this is sufficient to test hitless/non-hitless transitions,
but exercising other features is useful to check ste/cd population
logic (for example the .get_used logic).
Add an enum where bits define features per-master, at the moment there
is only ATS and STALLs which are mutually exclusive, but this would
make it easier to extend with other features in the future.
Also, Add 2 more tests for s1 <-> s2 transitions with stalls enabled.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20240830110349.797399-3-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
According to the spec (ARM IHI 0070 F.b), in
"5.5 Fault configuration (A, R, S bits)":
A STE with stage 2 translation enabled and STE.S2S == 0 is
considered ILLEGAL if SMMU_IDR0.STALL_MODEL == 0b10.
Also described in the pseudocode “SteIllegal()”
if STE.Config == '11x' then
[..]
if eff_idr0_stall_model == '10' && STE.S2S == '0' then
// stall_model forcing stall, but S2S == 0
return TRUE;
Which means, S2S must be set when stall model is
"ARM_SMMU_FEAT_STALL_FORCE", but currently the driver ignores that.
Although, the driver can do the minimum and only set S2S for
“ARM_SMMU_FEAT_STALL_FORCE”, it is more consistent to match S1
behaviour, which also sets it for “ARM_SMMU_FEAT_STALL” if the
master has requested stalls.
Also, since S2 stalls are enabled now, report them to the IOMMU layer
and for VFIO devices it will fail anyway as VFIO doesn’t register an
iopf handler.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20240830110349.797399-2-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
When VCMDQs are assigned to a VINTF owned by a guest (HYP_OWN bit unset),
only TLB and ATC invalidation commands are supported by the VCMDQ HW. So,
implement the new cmdq->supports_cmd op to scan the input cmd in order to
make sure that it is supported by the selected queue.
Note that the guest VM shouldn't have HYP_OWN bit being set regardless of
guest kernel driver writing it or not, i.e. the hypervisor running in the
host OS should wire this bit to zero when trapping a write access to this
VINTF_CONFIG register from a guest kernel.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/8160292337059b91271045800e5c62f7295e2c24.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The VCMDQ in the tegra241-cmdqv driver has a guest mode that supports only
a few invalidation commands. A batch is initialized with a cmdq, so it has
to confirm whether a new command is supported or not.
Add a supports_cmd function pointer to the cmdq structure, where the vcmdq
driver should hook a command scan function. Add an inline helper too so it
can be used by both sides.
If a new command is not supported, simply issue the existing batch and re-
init it as a new batch.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/aafb24b881504f18c5d0c7c15f2134e40ad2c486.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
NVIDIA's Tegra241 Soc has a CMDQ-Virtualization (CMDQV) hardware, extending
the standard ARM SMMU v3 IP to support multiple VCMDQs with virtualization
capabilities. In terms of command queue, they are very like a standard SMMU
CMDQ (or ECMDQs), but only support CS_NONE in the CS field of CMD_SYNC.
Add a new tegra241-cmdqv driver, and insert its structure pointer into the
existing arm_smmu_device, and then add related function calls in the SMMUv3
driver to interact with the CMDQV driver.
In the CMDQV driver, add a minimal part for the in-kernel support: reserve
VINTF0 for in-kernel use, and assign some of the VCMDQs to the VINTF0, and
select one VCMDQ based on the current CPU ID to execute supported commands.
This multi-queue design for in-kernel use gives some limited improvements:
up to 20% reduction of invalidation time was measured by a multi-threaded
DMA unmap benchmark, compared to a single queue.
The other part of the CMDQV driver will be user-space support that gives a
hypervisor running on the host OS to talk to the driver for virtualization
use cases, allowing VMs to use VCMDQs without trappings, i.e. no VM Exits.
This is designed based on IOMMUFD, and its RFC series is also under review.
It will provide a guest OS a bigger improvement: 70% to 90% reductions of
TLB invalidation time were measured by DMA unmap tests running in a guest,
compared to nested SMMU CMDQ (with trappings).
As the initial version, the CMDQV driver only supports ACPI configurations.
Signed-off-by: Nate Watterson <nwatterson@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/dce50490b2c10b7254fb36aa73ed7ffd812b283a.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
For model-specific implementation, repurpose the acpi_smmu_get_options()
to a wider acpi_smmu_acpi_probe_model(). A new model can add to the list
in this new function.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/79716299829aeab2e55b8c7932f2634b209bb4d5.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The CMDQV extension in NVIDIA Tegra241 SoC only supports CS_NONE in the
CS field of CMD_SYNC. Add a new SMMU option to accommodate that.
Suggested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/a3cb9bb2429fbae4a59f7ef517614d226763d717.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The symbols __arm_smmu_cmdq_skip_err(), arm_smmu_init_one_queue(), and
arm_smmu_cmdq_init() need to be used by the tegra241-cmdqv compilation
unit in a following patch.
Remove the static and put prototypes in the header.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/c4f2aa5f5f40a2e7c68b132c6d3171d6403de57a.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The CMDQV extension on NVIDIA Tegra241 SoC only supports CS_NONE in the
CS field of CMD_SYNC, v.s. standard SMMU CMDQ. Pass in the cmdq pointer
directly, so the function can identify a different cmdq implementation.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/723288287997b6dfbcd2a904d2c11e9b23f82250.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The driver calls in different places the arm_smmu_get_cmdq() helper, and
it's fine to do so since the helper always returns the single SMMU CMDQ.
However, with NVIDIA CMDQV extension or SMMU ECMDQ, there can be multiple
cmdqs in the system to select one from. And either case requires a batch
of commands to be issued to the same cmdq. Thus, a cmdq has to be decided
in the higher-level callers.
Add a cmdq pointer in arm_smmu_cmdq_batch structure, and decide the cmdq
when initializing the batch. Pass its pointer down to the bottom function.
Update __arm_smmu_cmdq_issue_cmd() accordingly for single command issuers.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/2cbf5ddefb6ea611e48d67c642271bd24421eb21.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
PCI ATS has a global Smallest Translation Unit field that is located in
the PF but shared by all of the VFs.
The expectation is that the STU will be set to the root port's global STU
capability which is driven by the IO page table configuration of the iommu
HW. Today it becomes set when the iommu driver first enables ATS.
Thus, to enable ATS on the VF, the PF must have already had the correct
STU programmed, even if ATS is off on the PF.
Unfortunately the PF only programs the STU when the PF enables ATS. The
iommu drivers tend to leave ATS disabled when IDENTITY translation is
being used.
Thus we can get into a state where the PF is setup to use IDENTITY with
the DMA API while the VF would like to use VFIO with a PAGING domain and
have ATS turned on. This fails because the PF never loaded a PAGING domain
and so it never setup the STU, and the VF can't do it.
The simplest solution is to have the iommu driver set the ATS STU when it
probes the device. This way the ATS STU is loaded immediately at boot time
to all PFs and there is no issue when a VF comes to use it.
Add a new call pci_prepare_ats() which should be called by iommu drivers
in their probe_device() op for every PCI device if the iommu driver
supports ATS. This will setup the STU based on whatever page size
capability the iommu HW has.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-0fb4d2ab6770+7e706-ats_vf_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_report_device_fault function was updated to return void while
assuming that drivers only need to call iommu_report_device_fault() for
reporting an iopf. This implementation causes following problems:
1. The drivers rely on the core code to call it's page_reponse,
however, when a fault is received and no fault capable domain is
attached / iopf_param is NULL, the ops->page_response is NOT called
causing the device to stall in case the fault type was PAGE_REQ.
2. The arm_smmu_v3 driver relies on the returned value to log errors
returning void from iommu_report_device_fault causes these events to
be missed while logging.
Modify the iommu_report_device_fault function to return -EINVAL for
cases where no fault capable domain is attached or iopf_param was NULL
and calls back to the driver (ops->page_response) in case the fault type
was IOMMU_FAULT_PAGE_REQ. The returned value can be used by the drivers
to log the fault/event as needed.
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Closes: https://lore.kernel.org/all/6147caf0-b9a0-30ca-795e-a1aa502a5c51@huawei.com/
Fixes: 3dfa64aecb ("iommu: Make iommu_report_device_fault() return void")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240816104906.1010626-1-praan@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The arm_smmu_domain_alloc() function returns error pointers on error. It
doesn't return NULL. Update the error checking to match.
Fixes: 52acd7d8a4 ("iommu/arm-smmu-v3: Add support for domain_alloc_user fn")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9208cd0d-8105-40df-93e9-bdcdf0d55eec@stanley.mountain
Signed-off-by: Will Deacon <will@kernel.org>
arm_smmu_sva_remove_dev_pasid() has been removed since commit d38c28dbef
("iommu/arm-smmu-v3: Put the SVA mmu notifier in the smmu_domain"), remain
the empty definition untouched in header file, which is used when
CONFIG_ARM_SMMU_V3_SVA is not set. So, let's remove the unused definition.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240815111504.48810-1-zhangzekun11@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
If io-pgtable quirk flag indicates support for hardware update of
dirty state, enable HA/HD bits in the SMMU CD and also set the DBM
bit in the page descriptor.
Now report the dirty page tracking capability of SMMUv3 and
select IOMMUFD_DRIVER for ARM_SMMU_V3 if IOMMUFD is enabled.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20240703101604.2576-6-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
This provides all the infrastructure to enable dirty tracking if the
hardware has the capability and domain alloc request for it.
Also, add a device_iommu_capable() check in iommufd core for
IOMMU_CAP_DIRTY_TRACKING before we request a user domain with dirty
tracking support.
Please note, we still report no support for IOMMU_CAP_DIRTY_TRACKING
as it will finally be enabled in a subsequent patch.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20240703101604.2576-5-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
If the SMMU supports it and the kernel was built with HTTU support,
Probe support for Hardware Translation Table Update (HTTU) which is
essentially to enable hardware update of access and dirty flags.
Probe and set the smmu::features for Hardware Dirty and Hardware Access
bits. This is in preparation, to enable it on the context descriptors of
stage 1 format.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20240703101604.2576-3-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
This will be used by iommufd for allocating usr managed domains and is
also required when we add support for iommufd based dirty tracking
support.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20240703101604.2576-2-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-test.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Fixes: da55da5a42 ("iommu/arm-smmu-v3: Make the kunit into a module")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-iommu-arm-arm-smmu-v3-v1-1-0e9f7584a5c8@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
The top of the 2 level stream table is (at most) 128k entries big, and two
high order allocations are required. One of __le64 which is programmed
into the HW (1M), and one of struct arm_smmu_strtab_l1_desc which holds
the CPU pointer (3M).
There is no reason to store the l2ptr_dma as nothing reads it. devm stores
a copy of it and the DMA memory will be freed via devm mechanisms. span is
a constant of 8+1. Remove both.
This removes 16 bytes from each arm_smmu_l1_ctx_desc and saves up to 2M of
memory per iommu instance.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-318ed5f6983b+198f-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
dmam_alloc_coherent() already returns zero'd memory so cfg->strtab.l1_desc
(the list of DMA addresses for the L2 entries) is already zero'd.
arm_smmu_init_l1_strtab() goes through and calls
arm_smmu_write_strtab_l1_desc() on the newly allocated (and zero'd) struct
arm_smmu_strtab_l1_desc, which ends up computing 'val = 0' and zeroing it
again.
Remove arm_smmu_init_l1_strtab() and just call devm_kcalloc() from
arm_smmu_init_strtab_2lvl to allocate the companion struct.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-318ed5f6983b+198f-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The SVA cleanup made the SSID logic entirely general so all we need to do
is call it with the correct cd table entry for a S1 domain.
This is slightly tricky because of the ASID and how the locking works, the
simple fix is to just update the ASID once we get the right locks.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
If the STE doesn't point to the CD table we can upgrade it by
reprogramming the STE with the appropriate S1DSS. We may also need to turn
on ATS at the same time.
Keep track if the installed STE is pointing at the cd_table and the ATS
state to trigger this path.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
S1DSS brings in quite a few new transition pairs that are
interesting. Test to/from S1DSS_BYPASS <-> S1DSS_SSID0, and
BYPASS <-> S1DSS_SSID0.
Test a contrived non-hitless flow to make sure that the logic works.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The HW supports this, use the S1DSS bits to configure the behavior
of SSID=0 which is the RID's translation.
If SSID's are currently being used in the CD table then just update the
S1DSS bits in the STE, remove the master_domain and leave ATS alone.
For iommufd the driver design has a small problem that all the unused CD
table entries are set with V=0 which will generate an event if VFIO
userspace tries to use the CD entry. This patch extends this problem to
include the RID as well if PASID is being used.
For BLOCKED with used PASIDs the
F_STREAM_DISABLED (STRTAB_STE_1_S1DSS_TERMINATE) event is generated on
untagged traffic and a substream CD table entry with V=0 (removed pasid)
will generate C_BAD_CD. Arguably there is no advantage to using S1DSS over
the CD entry 0 with V=0.
As we don't yet support PASID in iommufd this is a problem to resolve
later, possibly by using EPD0 for unused CD table entries instead of V=0,
and not using S1DSS for BLOCKED.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This removes all the notifier de-duplication logic in the driver and
relies on the core code to de-duplicate and allocate only one SVA domain
per mm per smmu instance. This naturally gives a 1:1 relationship between
SVA domain and mmu notifier.
It is a significant simplication of the flow, as we end up with a single
struct arm_smmu_domain for each MM and the invalidation can then be
shifted to properly use the masters list like S1/S2 do.
Remove all of the previous mmu_notifier, bond, shared cd, and cd refcount
logic entirely.
The logic here is tightly wound together with the unusued BTM
support. Since the BTM logic requires holding all the iommu_domains in a
global ASID xarray it conflicts with the design to have a single SVA
domain per PASID, as multiple SMMU instances will need to have different
domains.
Following patches resolve this by making the ASID xarray per-instance
instead of global. However, converting the BTM code over to this
methodology requires many changes.
Thus, since ARM_SMMU_FEAT_BTM is never enabled, remove the parts of the
BTM support for ASID sharing that interact with SVA as well.
A followup series is already working on fully enabling the BTM support,
that requires iommufd's VIOMMU feature to bring in the KVM's VMID as
well. It will come with an already written patch to bring back the ASID
sharing using a per-instance ASID xarray.
https://lore.kernel.org/linux-iommu/20240208151837.35068-1-shameerali.kolothum.thodi@huawei.com/https://lore.kernel.org/linux-iommu/26-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com/
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Fill in the smmu_domain->devices list in the new struct arm_smmu_domain
that SVA allocates. Keep track of every SSID and master that is using the
domain reusing the logic for the RID attach.
This is the first step to making the SVA invalidation follow the same
design as S1/S2 invalidation. At present nothing will read this list.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently the SVA domain is a naked struct iommu_domain, allocate a struct
arm_smmu_domain instead.
This is necessary to be able to use the struct arm_master_domain
mechanism.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Allow creating and managing arm_smmu_mater_domain's with a non-zero SSID
through the arm_smmu_attach_*() family of functions. This triggers ATC
invalidation for the correct SSID in PASID cases and tracks the
per-attachment SSID in the struct arm_smmu_master_domain.
Generalize arm_smmu_attach_remove() to be able to remove SSID's as well by
ensuring the ATC for the PASID is flushed properly.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
We no longer need a master->sva_enable to control what attaches are
allowed. Instead we can tell if the attach is legal based on the current
configuration of the master.
Keep track of the number of valid CD entries for SSID's in the cd_table
and if the cd_table has been installed in the STE directly so we know what
the configuration is.
The attach logic is then made into:
- SVA bind, check if the CD is installed
- RID attach of S2, block if SSIDs are used
- RID attach of IDENTITY/BLOCKING, block if SSIDs are used
arm_smmu_set_pasid() is already checking if it is possible to setup a CD
entry, at this patch it means the RID path already set a STE pointing at
the CD table.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Prepare to allow a S1 domain to be attached to a PASID as well. Keep track
of the SSID the domain is using on each master in the
arm_smmu_master_domain.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The core code allows the domain to be changed on the fly without a forced
stop in BLOCKED/IDENTITY. In this flow the driver should just continually
maintain the ATS with no change while the STE is updated.
ATS relies on a linked list smmu_domain->devices to keep track of which
masters have the domain programmed, but this list is also used by
arm_smmu_share_asid(), unrelated to ats.
Create two new functions to encapsulate this combined logic:
arm_smmu_attach_prepare()
<caller generates and sets the STE>
arm_smmu_attach_commit()
The two functions can sequence both enabling ATS and disabling across
the STE store. Have every update of the STE use this sequence.
Installing a S1/S2 domain always enables the ATS if the PCIe device
supports it.
The enable flow is now ordered differently to allow it to be hitless:
1) Add the master to the new smmu_domain->devices list
2) Program the STE
3) Enable ATS at PCIe
4) Remove the master from the old smmu_domain
This flow ensures that invalidations to either domain will generate an ATC
invalidation to the device while the STE is being switched. Thus we don't
need to turn off the ATS anymore for correctness.
The disable flow is the reverse:
1) Disable ATS at PCIe
2) Program the STE
3) Invalidate the ATC
4) Remove the master from the old smmu_domain
Move the nr_ats_masters adjustments to be close to the list
manipulations. It is a count of the number of ATS enabled masters
currently in the list. This is stricly before and after the STE/CD are
revised, and done under the list's spin_lock.
This is part of the bigger picture to allow changing the RID domain while
a PASID is in use. If a SVA PASID is relying on ATS to function then
changing the RID domain cannot just temporarily toggle ATS off without
also wrecking the SVA PASID. The new infrastructure here is organized so
that the PASID attach/detach flows will make use of it as well in
following patches.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The next patch will need to store the same master twice (with different
SSIDs), so allocate memory for each list element.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Add arm_smmu_set_pasid()/arm_smmu_remove_pasid() which are to be used by
callers that already constructed the arm_smmu_cd they wish to program.
These functions will encapsulate the shared logic to setup a CD entry that
will be shared by SVA and S1 domain cases.
Prior fixes had already moved most of this logic up into
__arm_smmu_sva_bind(), move it to it's final home.
Following patches will relieve some of the remaining SVA restrictions:
- The RID domain is a S1 domain and has already setup the STE to point to
the CD table
- The programmed PASID is the mm_get_enqcmd_pasid()
- Nothing changes while SVA is running (sva_enable)
SVA invalidation will still iterate over the S1 domain's master list,
later patches will resolve that.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This allows the driver the receive the mm and always a device during
allocation. Later patches need this to properly setup the notifier when
the domain is first allocated.
Remove ops->domain_alloc() as SVA was the only remaining purpose.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240508151611.1444352-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Static checker is complaining about the ASID possibly set uninitialized.
This only happens in case of error and this value would be ignored anyway.
A simple fix would be just to initialize the local variable to zero,
this path will only be reached on the first attach to a domain where
the CD is already initialized to zero.
This avoids having to bloat the function with an error path.
Closes: https://lore.kernel.org/linux-iommu/849e3d77-0a3c-43c4-878d-a0e061c8cd61@moroto.mountain/T/#u
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Fixes: 04905c17f6 ("iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240604185218.2602058-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
It turns out kconfig has problems ensuring the SMMU module and the KUNIT
module are consistently y/m to allow linking. It will permit KUNIT to be a
module while SMMU is built in.
Also, Fedora apparently enables kunit on production kernels.
So, put the entire kunit in its own module using the
VISIBLE_IF_KUNIT/EXPORT_SYMBOL_IF_KUNIT machinery. This keeps it out of
vmlinus on Fedora and makes the kconfig work in the normal way. There is
no cost if kunit is disabled.
Fixes: 56e1a4cc25 ("iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry")
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/all/aeea8546-5bce-4c51-b506-5d2008e52fef@leemhuis.info
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/0-v1-24cba6c0f404+2ae-smmu_kunit_module_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add tests for some of the more common STE update operations that we expect
to see, as well as some artificial STE updates to test the edges of
arm_smmu_write_entry. These also serve as a record of which common
operation is expected to be hitless, and how many syncs they require.
arm_smmu_write_entry implements a generic algorithm that updates an STE/CD
to any other abritrary STE/CD configuration. The update requires a
sequence of write+sync operations with some invariants that must be held
true after each sync. arm_smmu_write_entry lends itself well to
unit-testing since the function's interaction with the STE/CD is already
abstracted by input callbacks that we can hook to introspect into the
sequence of operations. We can use these hooks to guarantee that
invariants are held throughout the entire update operation.
Link: https://lore.kernel.org/r/20240106083617.1173871-3-mshavit@google.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Half the code was living in arm_smmu_domain_finalise_s1(), just move it
here and take the values directly from the pgtbl_ops instead of storing
copies.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Pull all the calculations for building the CD table entry for a mmu_struct
into arm_smmu_make_sva_cd().
Call it in the two places installing the SVA CD table entry.
Open code the last caller of arm_smmu_update_ctx_desc_devices() and remove
the function.
Remove arm_smmu_write_ctx_desc() since all callers are gone. Add the
locking assertions to arm_smmu_alloc_cd_ptr() since
arm_smmu_update_ctx_desc_devices() was the last problematic caller.
Remove quiet_cd since all users are gone, arm_smmu_make_sva_cd() creates
the same value.
The behavior of quiet_cd changes slightly, the old implementation edited
the CD in place to set CTXDESC_CD_0_TCR_EPD0 assuming it was a SVA CD
entry. This version generates a full CD entry with a 0 TTB0 and relies on
arm_smmu_write_cd_entry() to install it hitlessly.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Avoid arm_smmu_attach_dev() having to undo the changes to the
smmu_domain->devices list, acquire the cdptr earlier so we don't need to
handle that error.
Now there is a clear break in arm_smmu_attach_dev() where all the
prep-work has been done non-disruptively and we commit to making the HW
change, which cannot fail.
This completes transforming arm_smmu_attach_dev() so that it does not
disturb the HW if it fails.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Only the attach callers can perform an allocation for the CD table entry,
the other callers must not do so, they do not have the correct locking and
they cannot sleep. Split up the functions so this is clear.
arm_smmu_get_cd_ptr() will return pointer to a CD table entry without
doing any kind of allocation.
arm_smmu_alloc_cd_ptr() will allocate the table and any required
leaf.
A following patch will add lockdep assertions to arm_smmu_alloc_cd_ptr()
once the restructuring is completed and arm_smmu_alloc_cd_ptr() is never
called in the wrong context.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
A cleared entry is all 0's. Make arm_smmu_clear_cd() do this sequence.
If we are clearing an entry and for some reason it is not already
allocated in the CD table then something has gone wrong.
Remove case (5) from arm_smmu_write_ctx_desc().
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Introduce arm_smmu_make_s1_cd() to build the CD from the paging S1 domain,
and reorganize all the places programming S1 domain CD table entries to
call it.
Split arm_smmu_update_s1_domain_cd_entry() from
arm_smmu_update_ctx_desc_devices() so that the S1 path has its own call
chain separate from the unrelated SVA path.
arm_smmu_update_s1_domain_cd_entry() only works on S1 domains attached to
RIDs and refreshes all their CDs. Remove case (3) from
arm_smmu_write_ctx_desc() as it is now handled by directly calling
arm_smmu_write_cd_entry().
Remove the forced clear of the CD during S1 domain attach,
arm_smmu_write_cd_entry() will do this automatically if necessary.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
[will: Drop unused arm_smmu_clean_cd_entry() function]
Signed-off-by: Will Deacon <will@kernel.org>
CD table entries and STE's have the same essential programming sequence,
just with different types. Use the new ops indirection to link CD
programming to the common writer.
In a few more patches all CD writers will call an appropriate make
function and then directly call arm_smmu_write_cd_entry().
arm_smmu_write_ctx_desc() will be removed.
Until then lightly tweak arm_smmu_write_ctx_desc() to also use the new
programmer by using the same logic as right now to build the target CD on
the stack, sanitizing it to meet the used rules, and then using the
writer.
Sanitizing is necessary because the writer expects that the currently
programmed CD follows the used rules. Next patches add new make functions
and new direct calls to arm_smmu_write_cd_entry() which will require this.
Signed-off-by: Michael Shavit <mshavit@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Prepare to put the CD code into the same mechanism. Add an ops indirection
around all the STE specific code and make the worker functions independent
of the entry content being processed.
get_used and sync ops are provided to hook the correct code.
Signed-off-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
If devm_add_action() returns -ENOMEM, then MSIs are allocated but not
not freed on teardown. Use devm_add_action_or_reset() instead to keep
the static analyser happy.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Aleksandr Aprelkov <aaprelkov@usergate.com>
Link: https://lore.kernel.org/r/20240403053759.643164-1-aaprelkov@usergate.com
[will: Tweak commit message, remove warning message]
Signed-off-by: Will Deacon <will@kernel.org>
Existing remove_dev_pasid() callbacks of the underlying iommu drivers
get the attached domain from the group->pasid_array. However, the domain
stored in group->pasid_array is not always correct in all scenarios.
A wrong domain may result in failure in remove_dev_pasid() callback.
To avoid such problems, it is more reliable to pass the domain to the
remove_dev_pasid() op.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240328122958.83332-3-yi.l.liu@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead of passing a naked __le16 * around to represent a CD table entry
wrap it in a "struct arm_smmu_cd" with an array of the correct size. This
makes it much clearer which functions will comprise the "CD API".
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
At this point we know which master we are going to change the PCI config
on, this is the only device we need to invalidate. Switch
arm_smmu_atc_inv_domain() for arm_smmu_atc_inv_master().
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The SVA code is wired to assume that the SVA is programmed onto the
mm->pasid. The current core code always does this, so it is fine.
Add a check for clarity.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
