Implement global identity domain. All device groups in identity domain
will share this domain.
In attach device path, based on device capability it will allocate per
device domain ID and GCR3 table. So that it can support SVA.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241028093810.5901-11-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Previous patch enhanced core layer to check device PASID capability and
pass right flags to ops->domain_alloc_user().
Enhance amd_iommu_domain_alloc_user() to allocate domain with
appropriate page table based on flags parameter.
- If flags is empty then allocate domain with default page table type.
This will eventually replace ops->domain_alloc().
For UNMANAGED domain, core will call this interface with flags=0. So
AMD driver will continue to allocate V1 page table.
- If IOMMU_HWPT_ALLOC_PASID flags is passed then allocate domain with v2
page table.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241028093810.5901-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current code forces v1 page table for UNMANAGED domain and global page
table type (amd_iommu_pgtable) for rest of paging domain.
Following patch series adds support for domain_alloc_paging() ops. Also
enhances domain_alloc_user() to allocate page table based on 'flags.
Hence pass page table type as parameter to pdomain_setup_pgtable(). So
that caller can decide right page table type. Also update
dma_max_address() to take pgtable as parameter.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241028093810.5901-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently protection_domain_alloc() allocates domain and also sets up
page table. Page table setup is required for PAGING domain only. Domain
type like SVA doesn't need page table. Hence move page table setup code
to separate function.
Also SVA domain allocation path does not call pdom_setup_pgtable().
Hence remove IOMMU_DOMAIN_SVA type check.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241028093810.5901-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
amd_iommu_pgtable validation has to be done before calling
iommu_snp_enable(). It can be done immediately after reading IOMMU
features. Hence move this check to early_amd_iommu_init().
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241028093810.5901-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
amd_iommu_gt_ppr_supported() only checks for GTSUP. To support PASID
with V2 page table we need GIOSUP as well. Hence add new helper function
to check GIOSUP/GTSUP.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241028093810.5901-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If a page is mapped starting at 0 that is equal to or larger than can fit
in the current mode (number of table levels) it results in corrupting the
mapping as the following logic assumes the mode is correct for the page
size being requested.
There are two issues here, the check if the address fits within the table
uses the start address, it should use the last address to ensure that last
byte of the mapping fits within the current table mode.
The second is if the mapping is exactly the size of the full page table it
has to add another level to instead hold a single IOPTE for the large
size.
Since both corner cases require a 0 IOVA to be hit and doesn't start until
a page size of 2^48 it is unlikely to ever hit in a real system.
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-27ab08d646a1+29-amd_0map_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In suspend/resume path, no need to copy old DTE (early_enable_iommus()).
Just need to reload IOMMU hardware.
This is the side effect of commit 3ac3e5ee5e ("iommu/amd: Copy old
trans table from old kernel") which changed early_enable_iommus() but
missed to fix enable_iommus().
Resume path continue to work as 'amd_iommu_pre_enabled' is set to false
and copy_device_table() will fail. It will just re-loaded IOMMU. Hence I
think we don't need to backport this to stable tree.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20241016084958.99727-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use atomic64_inc_return(&ref) instead of atomic64_add_return(1, &ref)
to use optimized implementation and ease register pressure around
the primitive for targets that implement optimized variant.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241007084356.47799-1-ubizjak@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This domain free function can be called for IDENTITY and SVA domains too,
and they don't have page tables. For now protect against this by checking
the type. Eventually the different types should have their own free
functions.
Fixes: 485534bfcc ("iommu/amd: Remove conditions from domain free paths")
Reported-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/0-v1-ad9884ee5f5b+da-amd_iopgtbl_fix_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
An incorrect argument order calling amd_iommu_dev_flush_pasid_pages()
causes improper flushing of the IOMMU, leaving the old value of GCR3 from
a previous process attached to the same PASID.
The function has the signature:
void amd_iommu_dev_flush_pasid_pages(struct iommu_dev_data *dev_data,
ioasid_t pasid, u64 address, size_t size)
Correct the argument order.
Cc: stable@vger.kernel.org
Fixes: 474bf01ed9 ("iommu/amd: Add support for device based TLB invalidation")
Signed-off-by: Eliav Bar-ilan <eliavb@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/0-v1-fc6bc37d8208+250b-amd_pasid_flush_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add two new kernel command line parameters to limit the page-sizes
used for v1 page-tables:
nohugepages - Limits page-sizes to 4KiB
v2_pgsizes_only - Limits page-sizes to 4Kib/2Mib/1GiB; The
same as the sizes used with v2 page-tables
This is needed for multiple scenarios. When assigning devices to
SEV-SNP guests the IOMMU page-sizes need to match the sizes in the RMP
table, otherwise the device will not be able to access all shared
memory.
Also, some ATS devices do not work properly with arbitrary IO
page-sizes as supported by AMD-Vi, so limiting the sizes used by the
driver is a suitable workaround.
All-in-all, these parameters are only workarounds until the IOMMU core
and related APIs gather the ability to negotiate the page-sizes in a
better way.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240905072240.253313-1-joro@8bytes.org
The manual says that bit 6 is IGN for all Page-Table Base Address
pointers, don't set it.
Fixes: aaac38f614 ("iommu/amd: Initial support for AMD IOMMU v2 page table")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The HW only has 52 bits of physical address support, the supported page
sizes should not have bits set beyond this. Further the spec says that the
6th level does not support any "default page size for translation entries"
meaning leafs in the 6th level are not allowed too.
Rework the definition to use GENMASK to build the range of supported pages
from the top of physical to 4k.
Nothing ever uses such large pages, so this is a cosmetic/documentation
improvement only.
Reported-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu driver is supposed to provide these ops to its io_pgtable
implementation so that it can hook the invalidations and do the right
thing.
They are called by wrapper functions like io_pgtable_tlb_add_page() etc,
which the AMD code never calls.
Instead it directly calls the AMD IOMMU invalidation functions by casting
to the struct protection_domain. Remove it all.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Generates the same code, but is not the expected C style.
Fixes: aaac38f614 ("iommu/amd: Initial support for AMD IOMMU v2 page table")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Don't use tlb as some flag to indicate if protection_domain_alloc()
completed. Have protection_domain_alloc() unwind itself in the normal
kernel style and require protection_domain_free() only be called on
successful results of protection_domain_alloc().
Also, the amd_iommu_domain_free() op is never called by the core code with
a NULL argument, so remove all the NULL tests as well.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The AMD io_pgtable stuff doesn't implement the tlb ops callbacks, instead
it invokes the invalidation ops directly on the struct protection_domain.
Narrow the use of struct protection_domain to only those few code paths.
Make everything else properly use struct amd_io_pgtable through the call
chains, which is the correct modular type for an io-pgtable module.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/9-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We already have memory in the union here that is being wasted in AMD's
case, use it to store the nid.
Putting the nid here further isolates the io_pgtable code from the struct
protection_domain.
Fixup protection_domain_alloc so that the NID from the device is provided,
at this point dev is never NULL for AMD so this will now allocate the
first table pointer on the correct NUMA node.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/8-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This struct is already in iop.cfg, we don't need two.
AMD is using this API sort of wrong, the cfg is supposed to be passed in
and then the allocation function will allocate ops memory and copy the
passed config into the new memory. Keep it kind of wrong and pass in the
cfg memory that is already part of the pagetable struct.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There is struct protection_domain iopt and struct amd_io_pgtable iopt.
Next patches are going to want to write domain.iopt.iopt.xx which is quite
unnatural to read.
Give one of them a different name, amd_io_pgtable has fewer references so
call it pgtbl, to match pgtbl_cfg, instead.
Suggested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Looks like many refactorings here have left this confused. There is only
one storage of the root/mode, it is in the iop struct.
increase_address_space() calls amd_iommu_domain_set_pgtable() with values
that it already stored in iop a few lines above.
amd_iommu_domain_clr_pt_root() is zero'ing memory we are about to free. It
used to protect against a double free of root, but that is gone now.
Remove amd_iommu_domain_set_pgtable(), amd_iommu_domain_set_pt_root(),
amd_iommu_domain_clr_pt_root() as they are all pointless.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is a serious bug if the domain is still mapped to any DTEs when it is
freed as we immediately start freeing page table memory, so any remaining
HW touch will UAF.
If it is not mapped then dev_list is empty and amd_iommu_domain_update()
does nothing.
Remove it and add a WARN_ON() to catch this class of bug.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When using io_pgtable the correct pgsize_bitmap is stored in the cfg, both
v1_alloc_pgtable() and v2_alloc_pgtable() set it correctly.
This fixes a bug where the v2 pgtable had the wrong pgsize as
protection_domain_init_v2() would set it and then do_iommu_domain_alloc()
immediately resets it.
Remove the confusing ops.pgsize_bitmap since that is not used if the
driver sets domain.pgsize_bitmap.
Fixes: 134288158a ("iommu/amd: Add domain_alloc_user based domain allocation")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Domain allocation is always done under a sleepable context, the v1 path
and other drivers use GFP_KERNEL already. Fix the v2 path to also use
GFP_KERNEL.
Fixes: 0d571dcbe7 ("iommu/amd: Allocate page table using numa locality info")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All the page table memory should be allocated/free within the io_pgtable
struct. The v2 path is already doing this, make it consistent.
It is hard to see but the free of the root in protection_domain_free() is
a NOP on the success path because v1_free_pgtable() does
amd_iommu_domain_clr_pt_root().
The root memory is already freed because free_sub_pt() put it on the
freelist. The free path in protection_domain_free() is only used during
error unwind of protection_domain_alloc().
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As its used inside iommu.c only. Also rename function to dev_update_dte()
as its static function.
No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240828111029.5429-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove separate function to update and flush the device table as only
amd_iommu_update_and_flush_device_table() calls these functions.
No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240828111029.5429-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD driver uses amd_iommu_domain_flush_complete() function to make sure
IOMMU processed invalidation commands before proceeding. Ideally this
should be called from functions which updates DTE/invalidates caches.
There is no need to call this function explicitly. This patches makes
below changes :
- Rename amd_iommu_domain_flush_complete() -> domain_flush_complete()
and make it as static function.
- Rearrage domain_flush_complete() to avoid forward declaration.
- Update amd_iommu_update_and_flush_device_table() to call
domain_flush_complete().
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240828111029.5429-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As its not used outside iommu.c. Also rename it as dev_flush_pasid_all().
No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240828111029.5429-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Do not try to set max_pasids in error path as dev_data is not allocated.
Fixes: a0c47f233e ("iommu/amd: Introduce iommu_dev_data.max_pasids")
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240828111029.5429-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It was added in commit 52815b7568 ("iommu/amd: Add support for
IOMMUv2 domain mode"), but never used it. Hence remove these unused
macros.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240828111029.5429-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
amd_iommu_is_attach_deferred() is a callback function called by
iommu_ops. Make it as static.
No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240828111029.5429-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Update event buffer head pointer once driver completes processing. So
that IOMMU can write new log without waiting for driver to complete
processing all event logs.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240828111029.5429-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PCI ATS has a global Smallest Translation Unit field that is located in
the PF but shared by all of the VFs.
The expectation is that the STU will be set to the root port's global STU
capability which is driven by the IO page table configuration of the iommu
HW. Today it becomes set when the iommu driver first enables ATS.
Thus, to enable ATS on the VF, the PF must have already had the correct
STU programmed, even if ATS is off on the PF.
Unfortunately the PF only programs the STU when the PF enables ATS. The
iommu drivers tend to leave ATS disabled when IDENTITY translation is
being used.
Thus we can get into a state where the PF is setup to use IDENTITY with
the DMA API while the VF would like to use VFIO with a PAGING domain and
have ATS turned on. This fails because the PF never loaded a PAGING domain
and so it never setup the STU, and the VF can't do it.
The simplest solution is to have the iommu driver set the ATS STU when it
probes the device. This way the ATS STU is loaded immediately at boot time
to all PFs and there is no issue when a VF comes to use it.
Add a new call pci_prepare_ats() which should be called by iommu drivers
in their probe_device() op for every PCI device if the iommu driver
supports ATS. This will setup the STU based on whatever page size
capability the iommu HW has.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-0fb4d2ab6770+7e706-ats_vf_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Clean up and reorder them according to the bit index. There is no
functional change.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240816221650.62295-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Create global blocked domain with attach device ops. It will clear the
DTE so that all DMA from device will be aborted.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240722115452.5976-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Fix NULL dereference when freeing domain in Unisoc SPRD driver.
- Separate assignment statements with semicolons in AMD page-table code.
- Fix Tegra erratum workaround when the CPU is using 16KiB pages.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaiQhUQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNI3SB/9m78weKYVHUc87Vwzs/3aEmMzjNiCuIIax
nFKIFKZIeL7UqiUK1dehoVU+S/JYYjjPyR/0yeb+l4w4IaTmkcAu48r9rDssuoLe
I6rkLbIfwGIw5pKtf21UtkRmMhnoW2ptx8qrCFbvIkFYVWyfayP+c7hkbKBh2bMD
cal8bYrgWuax3TTgxu5V6cBBSK+EDmdN2ZVGArY1x7VZImFWZuZ1s5OowjHCX4Q1
il2ETdL4M8OmlIsitO96I0zvne2Ci+12i5TQOl8Ao5d7BhM5LfjdQjeNvT6YhdX9
X3u+p+GfVYQNZI1HYvwNvWTEuF+PIj5Oem9hfKDo/8vAYERe2M1A
=7kvS
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Will Deacon:
"We're still resolving a regression with the handling of unexpected
page faults on SMMUv3, but we're not quite there with a fix yet.
- Fix NULL dereference when freeing domain in Unisoc SPRD driver
- Separate assignment statements with semicolons in AMD page-table
code
- Fix Tegra erratum workaround when the CPU is using 16KiB pages"
* tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: arm-smmu: Fix Tegra workaround for PAGE_SIZE mappings
iommu/amd: Convert comma to semicolon
iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en
Replace a comma between expression statements by a semicolon.
Fixes: c9b258c6be ("iommu/amd: Prepare for generic IO page table framework")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240716072545.968690-1-nichen@iscas.ac.cn
Signed-off-by: Will Deacon <will@kernel.org>
- Core:
* Support for the "ats-supported" device-tree property.
* Removal of the 'ops' field from 'struct iommu_fwspec'.
* Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users.
* Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem.
* Remove stale documentation.
* Add missing MODULE_DESCRIPTION() macro.
* Misc cleanups.
- Allwinner Sun50i:
* Ensure bypass mode is disabled on H616 SoCs.
* Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker.
* Add new device-tree compatible strings.
- AMD Vi:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
- Arm SMMUv2:
* Print much more useful information on context faults.
* Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n.
* Add new Qualcomm device-tree bindings.
- Arm SMMUv3:
* Support for hardware update of access/dirty bits and reporting via
IOMMUFD.
* More driver rework from Jason, this time updating the PASID/SVA support
to prepare for full IOMMUFD support.
* Add missing MODULE_DESCRIPTION() macro.
* Minor fixes and cleanups.
- NVIDIA Tegra:
* Fix for benign fwspec initialisation issue exposed by rework on the
core branch.
- Intel VT-d:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
* Use READ_ONCE() to read volatile descriptor status.
* Remove support for handling Execute-Requested requests.
* Avoid calling iommu_domain_alloc().
* Minor fixes and refactoring.
- Qualcomm MSM:
* Updates to the device-tree bindings.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaZTqMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNApdB/wL2gW7ANJN3KDrOiWdq06P9fuzxbuiAegI
aKGH+aT05kJjLBXpAE5K9Bas0RbgN8iIB4TITDR9jyLnMOlTP3poy0fvB8y27q00
/WkQ7yVPkZc58ySdEOGH/EbuQkiXcD1YTjTGWP9071xzbWTDbsYN0smfbvvB9LgI
56KhdcUtB0QsqhqBzyyznHJLFdpVvDpbkiAFDXJfor7SNOOtV9a4Ect6IYteaYKz
S6+DWDEfUs+fHTEKEZ9sZVA745f2zPkT/YHY8vjLOEukWN07+3/2AKTra19DIgqF
HCGitRyZjOut1fg8sLn0SUliCKe/G/bHlwSbHnxJQ73b91YDvpzD
=xvLD
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
Current code configures GCR3 even when device is attached to identity
domain. So that we can support SVA with identity domain. This means in
attach device path it updates Guest Translation related bits in DTE.
Commit de111f6b4f ("iommu/amd: Enable Guest Translation after reading
IOMMU feature register") missed to enable Control[GT] bit in resume
path. Its causing certain laptop to fail to resume after suspend.
This is because we have inconsistency between between control register
(GT is disabled) and DTE (where we have enabled guest translation related
bits) in resume path. And IOMMU hardware throws ILLEGAL_DEV_TABLE_ENTRY.
Fix it by enabling GT bit in resume path.
Reported-by: Błażej Szczygieł <spaz16@wp.pl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218975
Fixes: de111f6b4f ("iommu/amd: Enable Guest Translation after reading IOMMU feature register")
Tested-by: Błażej Szczygieł <spaz16@wp.pl>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240621101533.20216-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 87a6f1f22c ("iommu/amd: Introduce per-device domain ID to fix
potential TLB aliasing issue") introduced per device domain ID when
domain is configured with v2 page table. And in invalidation path, it
uses per device structure (dev_data->gcr3_info.domid) to get the domain ID.
In detach_device() path, current code tries to invalidate IOMMU cache
after removing dev_data from domain device list. This means when domain
is configured with v2 page table, amd_iommu_domain_flush_all() will not be
able to invalidate cache as device is already removed from domain device
list.
This is causing change domain tests (changing domain type from identity to DMA)
to fail with IO_PAGE_FAULT issue.
Hence invalidate cache and update DTE before updating data structures.
Reported-by: FahHean Lee <fahhean.lee@amd.com>
Reported-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Fixes: 87a6f1f22c ("iommu/amd: Introduce per-device domain ID to fix potential TLB aliasing issue")
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Tested-by: Sairaj Arun Kodilkar <sairaj.arunkodilkar@amd.com>
Tested-by: FahHean Lee <fahhean.lee@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240620060552.13984-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use try_cmpxchg64() instead of cmpxchg64 (*ptr, old, new) != old in
v2_alloc_pte(). cmpxchg returns success in ZF flag, so this change
saves a compare after cmpxchg (and related move instruction
in front of cmpxchg).
This is the same improvement as implemented for alloc_pte() in:
commit 0d10fe7591 ("iommu/amd: Use try_cmpxchg64 in alloc_pte and free_clear_pte")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240522082729.971123-1-ubizjak@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Check for EFR[EPHSup] bit before enabling PPR. This bit must be set
to enable PPR.
Reported-by: Borislav Petkov <bp@alien8.de>
Fixes: c4cb231111 ("iommu/amd: Add support for enable/disable IOPF")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218900
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Jean-Christophe Guillain <jean-christophe@guillain.net>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240530071118.10297-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
-----BEGIN PGP SIGNATURE-----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=xjoS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
This reverts commit fa5745aca1.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along.
Link: https://lore.kernel.org/r/20240410221307.2162676-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Commit 8e01797331 ("iommu/amd: Enable Guest Translation before
registering devices") moved IOMMU Guest Translation (GT) enablement to
early init path. It does feature check based on Global EFR value (got from
ACPI IVRS table). Later it adjusts EFR value based on IOMMU feature
register (late_iommu_features_init()).
It seems in some systems BIOS doesn't set gloabl EFR value properly.
This is causing mismatch. Hence move IOMMU GT enablement after
late_iommu_features_init() so that it does check based on IOMMU EFR
value.
Fixes: 8e01797331 ("iommu/amd: Enable Guest Translation before registering devices")
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/linux-iommu/333e6eb6-361c-4afb-8107-2573324bf689@gmail.com/
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Link: https://lore.kernel.org/r/20240506082039.7575-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With WERROR=y, which is default, clang is not happy:
.../amd/pasid.c:168:3: error: call to undeclared function 'mmu_notifier_unregister'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
.../amd/pasid.c:191:8: error: call to undeclared function 'mmu_notifier_register'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
2 errors generated.
Select missed dependency.
Fixes: a5a91e5484 ("iommu/amd: Add SVA domain support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240429111707.2795194-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This includes :
- Add data structure to track per protection domain dev/pasid binding details
protection_domain->dev_data_list will track attached list of
dev_data/PASIDs.
- Move 'to_pdomain()' to header file
- Add iommu_sva_set_dev_pasid(). It will check whether PASID is supported
or not. Also adds PASID to SVA protection domain list as well as to
device GCR3 table.
- Add iommu_ops.remove_dev_pasid support. It will unbind PASID from
device. Also remove pasid data from protection domain device list.
- Add IOMMU_SVA as dependency to AMD_IOMMU driver
For a given PASID, iommu_set_dev_pasid() will bind all devices to same
SVA protection domain (1 PASID : 1 SVA protection domain : N devices).
This protection domain is different from device protection domain (one
that's mapped in attach_device() path). IOMMU uses domain ID for caching,
invalidation, etc. In SVA mode it will use per-device-domain-ID. Hence in
invalidation path we retrieve domain ID from gcr3_info_table structure and
use that for invalidation.
Co-developed-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-14-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Return success from enable_feature(IOPF) path as this interface is going
away. Instead we will enable/disable IOPF support in attach/detach device
path.
In attach device path, if device is capable of PRI, then we will add it to
per IOMMU IOPF queue and enable PPR support in IOMMU. Also it will
attach device to domain even if it fails to enable PRI or add device to
IOPF queue as device can continue to work without PRI support.
In detach device patch it follows following sequence:
- Flush the queue for the given device
- Disable PPR support in DTE[devid]
- Remove device from IOPF queue
- Disable device PRI
Also add IOMMU_IOPF as dependency to AMD_IOMMU driver.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-13-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Whenever there is a page fault IOMMU logs entry to ppr log and sends
interrupt to host. We have to handle the page fault and respond to IOMMU.
Add support to validate page fault request and hook it to core iommu
page fault handler.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-12-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This generates AMD IOMMU COMPLETE_PPR_REQUEST for the specified device
with the specified PRI Response Code.
Also update amd_iommu_complete_ppr() to accept 'struct device' instead
of pdev as it just need device reference.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-11-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD IOMMU hardware supports PCI Peripheral Paging Request (PPR) using
a PPR log, which is a circular buffer containing requests from downstream
end-point devices.
There is one PPR log per IOMMU instance. Therefore, allocate an iopf_queue
per IOMMU instance during driver initialization, and free the queue during
driver deinitialization.
Also rename enable_iommus_v2() -> enable_iommus_ppr() to reflect its
usage. And add amd_iommu_gt_ppr_supported() check before enabling PPR
log.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit eda8c2860a ("iommu/amd: Enable device ATS/PASID/PRI capabilities
independently") changed the way it enables device capability while
attaching devices. I missed to account the attached domain capability.
Meaning if domain is not capable of handling PASID/PRI (ex: paging
domain with v1 page table) then enabling device feature is not required.
This patch enables PASID/PRI only if domain is capable of handling SVA.
Also move pci feature enablement to do_attach() function so that we make
SVA capability in one place. Finally make PRI enable/disable functions as
static functions.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
SVA can be supported if domain is in passthrough mode or paging domain
with v2 page table. Current code sets up GCR3 table for domain with v2
page table only. Setup GCR3 table for all SVA capable domains.
- Move GCR3 init/destroy to separate function.
- Change default GCR3 table to use MAX supported PASIDs. Ideally it
should use 1 level PASID table as its using PASID zero only. But we
don't have support to extend PASID table yet. We will fix this later.
- When domain is configured with passthrough mode, allocate default GCR3
table only if device is SVA capable.
Note that in attach_device() path it will not know whether device will use
SVA or not. If device is attached to passthrough domain and if it doesn't
use SVA then GCR3 table will never be used. We will endup wasting memory
allocated for GCR3 table. This is done to avoid DTE update when
attaching PASID to device.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This variable will track the number of PASIDs supported by the device.
If IOMMU or device doesn't support PASID then it will be zero.
This will be used while allocating GCR3 table to decide required number
of PASID table levels. Also in PASID bind path it will use this variable
to check whether device supports PASID or not.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
* Do not re-read ppr head pointer as its just updated by the driver.
* Do not read PPR buffer tail pointer inside while loop. If IOMMU
generates PPR events continuously then completing interrupt processing
takes long time. In worst case it may cause infinite loop.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In preparation to subsequent PPR-related patches, and also remove static
declaration for certain helper functions so that it can be reused in other
files.
Also rename below functions:
alloc_ppr_log -> amd_iommu_alloc_ppr_log
iommu_enable_ppr_log -> amd_iommu_enable_ppr_log
free_ppr_log -> amd_iommu_free_ppr_log
iommu_poll_ppr_log -> amd_iommu_poll_ppr_log
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Consolidate per device update and flush logic into separate function.
Also make it as global function as it will be used in subsequent series
to update the DTE.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240418103400.6229-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Previously, IOMMU core layer was forcing IOMMU_DOMAIN_DMA domain for
untrusted device. This always took precedence over driver's
def_domain_type(). Commit 59ddce4418 ("iommu: Reorganize
iommu_get_default_domain_type() to respect def_domain_type()") changed
the behaviour. Current code calls def_domain_type() but if it doesn't
return IOMMU_DOMAIN_DMA for untrusted device it throws error. This
results in IOMMU group (and potentially IOMMU itself) in undetermined
state.
This patch adds untrusted check in AMD IOMMU driver code. So that it
allows eGPUs behind Thunderbolt work again.
Fine tuning amd_iommu_def_domain_type() will be done later.
Reported-by: Eric Wagner <ewagner12@gmail.com>
Link: https://lore.kernel.org/linux-iommu/CAHudX3zLH6CsRmLE-yb+gRjhh-v4bU5_1jW_xCcxOo_oUUZKYg@mail.gmail.com
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3182
Fixes: 59ddce4418 ("iommu: Reorganize iommu_get_default_domain_type() to respect def_domain_type()")
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: stable@kernel.org # v6.7+
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240423111725.5813-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It's somewhat hard to see, but arm64's arch_setup_dma_ops() should only
ever call iommu_setup_dma_ops() after a successful iommu_probe_device(),
which means there should be no harm in achieving the same order of
operations by running it off the back of iommu_probe_device() itself.
This then puts it in line with the x86 and s390 .probe_finalize bodges,
letting us pull it all into the main flow properly. As a bonus this lets
us fold in and de-scope the PCI workaround setup as well.
At this point we can also then pull the call up inside the group mutex,
and avoid having to think about whether iommu_group_store_type() could
theoretically race and free the domain if iommu_setup_dma_ops() ran just
*before* iommu_device_use_default_domain() claims it... Furthermore we
replace one .probe_finalize call completely, since the only remaining
implementations are now one which only needs to run once for the initial
boot-time probe, and two which themselves render that path unreachable.
This leaves us a big step closer to realistically being able to unpick
the variety of different things that iommu_setup_dma_ops() has been
muddling together, and further streamline iommu-dma into core API flows
in future.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> # For Intel IOMMU
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/bebea331c1d688b34d9862eefd5ede47503961b8.1713523152.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel IOMMU code currently tries to allocate all DMAR fault interrupt
vectors on the boot cpu. On large systems with high DMAR counts this
results in vector exhaustion, and most of the vectors are not initially
allocated socket local.
Instead, have a cpu on each node do the vector allocation for the DMARs on
that node. The boot cpu still does the allocation for its node during its
boot sequence.
Signed-off-by: Dimitri Sivanich <sivanich@hpe.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/Zfydpp2Hm+as16TY@hpe.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use consistent log severity (pr_warn) to log all messages in SNP
enable path.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240410101643.32309-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
DTE[Mode]=0 is not supported when SNP is enabled in the host. That means
to support SNP, IOMMU must be configured with V1 page table (See IOMMU
spec [1] for the details). If user passes kernel command line to configure
IOMMU domains with v2 page table (amd_iommu=pgtbl_v2) then disable SNP
as the user asked by not forcing the page table to v1.
[1] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/specifications/48882_IOMMU.pdf
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240410085702.31869-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
LOCKDEP detector reported below warning:
----------------------------------------
[ 23.796949] ========================================================
[ 23.796950] WARNING: possible irq lock inversion dependency detected
[ 23.796952] 6.8.0fix+ #811 Not tainted
[ 23.796954] --------------------------------------------------------
[ 23.796954] kworker/0:1/8 just changed the state of lock:
[ 23.796956] ff365325e084a9b8 (&domain->lock){..-.}-{3:3}, at: amd_iommu_flush_iotlb_all+0x1f/0x50
[ 23.796969] but this lock took another, SOFTIRQ-unsafe lock in the past:
[ 23.796970] (pd_bitmap_lock){+.+.}-{3:3}
[ 23.796972]
and interrupts could create inverse lock ordering between them.
[ 23.796973]
other info that might help us debug this:
[ 23.796974] Chain exists of:
&domain->lock --> &dev_data->lock --> pd_bitmap_lock
[ 23.796980] Possible interrupt unsafe locking scenario:
[ 23.796981] CPU0 CPU1
[ 23.796982] ---- ----
[ 23.796983] lock(pd_bitmap_lock);
[ 23.796985] local_irq_disable();
[ 23.796985] lock(&domain->lock);
[ 23.796988] lock(&dev_data->lock);
[ 23.796990] <Interrupt>
[ 23.796991] lock(&domain->lock);
Fix this issue by disabling interrupt when acquiring pd_bitmap_lock.
Note that this is temporary fix. We have a plan to replace custom bitmap
allocator with IDA allocator.
Fixes: 87a6f1f22c ("iommu/amd: Introduce per-device domain ID to fix potential TLB aliasing issue")
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240404102717.6705-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The host SNP worthiness can determined later, after alternatives have
been patched, in snp_rmptable_init() depending on cmdline options like
iommu=pt which is incompatible with SNP, for example.
Which means that one cannot use X86_FEATURE_SEV_SNP and will need to
have a special flag for that control.
Use that newly added CC_ATTR_HOST_SEV_SNP in the appropriate places.
Move kdump_sev_callback() to its rightful place, while at it.
Fixes: 216d106c7f ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Link: https://lore.kernel.org/r/20240327154317.29909-6-bp@alien8.de
Including:
- Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
- Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
- ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
- AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
- Some smaller cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=HV07
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
Some smaller cleanups and fixes"
* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu: Fix compilation without CONFIG_IOMMU_INTEL
iommu/amd: Fix sleeping in atomic context
iommu/dma: Document min_align_mask assumption
iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
iommu/vt-d: Remove scalable mode context entry setup from attach_dev
iommu/vt-d: Setup scalable mode context entry in probe path
iommu/vt-d: Fix NULL domain on device release
iommu: Add static iommu_ops->release_domain
iommu/vt-d: Improve ITE fault handling if target device isn't present
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
PCI: Make pci_dev_is_disconnected() helper public for other drivers
iommu/vt-d: Use device rbtree in iopf reporting path
iommu/vt-d: Use rbtree to track iommu probed devices
iommu/vt-d: Merge intel_svm_bind_mm() into its caller
iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
iommu/vt-d: Add the document for Intel IOMMU debugfs
iommu/vt-d: Use kcalloc() instead of kzalloc()
iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
...
Commit cf70873e3d ("iommu/amd: Refactor GCR3 table helper functions")
changed GFP flag we use for GCR3 table. Original plan was to move GCR3
table allocation outside spinlock. But this requires complete rework of
attach device path. Hence we didn't do it as part of SVA series. For now
revert the GFP flag to ATOMIC (same as original code).
Fixes: cf70873e3d ("iommu/amd: Refactor GCR3 table helper functions")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240307052738.116035-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On many systems that have an AMD IOMMU the following sequence of
warnings is observed during bootup.
```
pci 0000:00:00.2 can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
```
This series of events happens because of the IOMMU initialization
sequence order and the lack of _PRT entries for the IOMMU.
During initialization the IOMMU driver first enables the PCI device
using pci_enable_device(). This will call acpi_pci_irq_enable()
which will check if the interrupt is declared in a PCI routing table
(_PRT) entry. According to the PCI spec [1] these routing entries
are only required under PCI root bridges:
The _PRT object is required under all PCI root bridges
The IOMMU is directly connected to the root complex, so there is no
parent bridge to look for a _PRT entry. The first warning is emitted
since no entry could be found in the hierarchy. The second warning is
then emitted because the interrupt hasn't yet been configured to any
value. The pin was configured in pci_read_irq() but the byte in
PCI_INTERRUPT_LINE return 0xff which means "Unknown".
After that sequence of events pci_enable_msi() is called and this
will allocate an interrupt.
That is both of these warnings are totally harmless because the IOMMU
uses MSI for interrupts. To avoid even trying to probe for a _PRT
entry mark the IOMMU as IRQ managed. This avoids both warnings.
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/06_Device_Configuration/Device_Configuration.html?highlight=_prt#prt-pci-routing-table [1]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Fixes: cffe0a2b5a ("x86, irq: Keep balance of IOAPIC pin reference count")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240122233400.1802-1-mario.limonciello@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With v1 page table, the AMD IOMMU spec states that the hardware must use
the domain ID to tag its internal translation caches. I/O devices with
different v1 page tables must be given different domain IDs. I/O devices
that share the same v1 page table __may__ be given the same domain ID.
This domain ID management policy is currently implemented by the AMD
IOMMU driver. In this case, only the domain ID is needed when issuing the
INVALIDATE_IOMMU_PAGES command to invalidate the IOMMU translation cache
(TLB).
With v2 page table, the hardware uses domain ID and PASID as parameters
to tag and issue the INVALIDATE_IOMMU_PAGES command. Since the GCR3 table
is setup per-device, and there is no guarantee for PASID to be unique
across multiple devices. The same PASID for different devices could
have different v2 page tables. In such case, if multiple devices share the
same domain ID, IOMMU translation cache for these devices would be polluted
due to TLB aliasing.
Hence, avoid the TLB aliasing issue with v2 page table by allocating unique
domain ID for each device even when multiple devices are sharing the same v1
page table. Please note that this fix would result in multiple
INVALIDATE_IOMMU_PAGES commands (one per domain id) when unmapping a
translation.
Domain ID can be shared until device starts using PASID. We will enhance this
code later where we will allocate per device domain ID only when its needed.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-18-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since they are moved to struct iommu_dev_data, and the driver has been
ported to use them.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-17-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Consolidate all flush related code in one place so that its easy
to maintain.
No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-16-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We have removed iommu_v2 module and converted v2 page table to use
common flush functions. Also we have moved GCR3 table to per device.
PASID related functions are not used. Hence remove these unused
functions.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-15-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To use the new per-device struct gcr3_tbl_info. Use GFP_KERNEL flag
instead of GFP_ATOMIC for GCR3 table allocation. Also modify
set_dte_entry() to use new per device GCR3 table.
Also in free_gcr3_table() path replace BUG_ON with WARN_ON_ONCE().
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-14-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To removes the code to setup GCR3 table, and only handle domain
create / destroy, since GCR3 is no longer part of a domain.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-13-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If domain is configured with V2 page table then setup default GCR3
with domain GCR3 pointer. So that all devices in the domain uses same page
table for translation. Also return page table setup status from do_attach()
function.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-12-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Refactor GCR3 helper functions in preparation to use per device
GCR3 table.
* Add new function update_gcr3 to update per device GCR3 table
* Remove per domain default GCR3 setup during v2 page table allocation.
Subsequent patch will add support to setup default gcr3 while
attaching device to domain.
* Remove amd_iommu_domain_update() from V2 page table path as device
detach path will take care of updating the domain.
* Consolidate GCR3 table related code in one place so that its easy
to maintain.
* Rename functions to reflect its usage.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-11-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Consolidate GCR3 table related code in one place so that its easy
to maintain.
Note that this patch doesn't move __set_gcr3/__clear_gcr3. We are moving
GCR3 table from per domain to per device. Following series will rework
these functions. During that time I will move these functions as well.
No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add support to invalidate TLB/IOTLB for the given device.
These functions will be used in subsequent patches where we will
introduce per device GCR3 table and SVA support.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Page table mode (v1, v2 or pt) is per domain property. Recently we have
enhanced protection_domain.pd_mode to track per domain page table mode.
Use that variable to check the page table mode instead of global
'amd_iommu_pgtable' in {map/unmap}_pages path.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD IOMMU GCR3 table is indexed by PASID. Each entry stores guest CR3
register value, which is an address to the root of guest IO page table.
The GCR3 table can be programmed per-device. However, Linux AMD IOMMU
driver currently managing the table on a per-domain basis.
PASID is a device feature. When SVA is enabled it will bind PASID to
device, not domain. Hence it makes sense to have per device GCR3 table.
Introduce struct iommu_dev_data.gcr3_tbl_info to keep track of GCR3 table
configuration. This will eventually replaces gcr3 related variables in
protection_domain structure.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This enum variable is used to track the type of page table used by the
protection domain. It will replace the protection_domain.flags in
subsequent series.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce get_amd_iommu_from_dev() and get_amd_iommu_from_dev_data().
And replace rlookup_amd_iommu() with the new helper function where
applicable to avoid unnecessary loop to look up struct amd_iommu from
struct device.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU Guest Translation (GT) feature needs to be enabled before
invalidating guest translations (CMD_INV_IOMMU_PAGES with GN=1).
Currently GT feature is enabled after setting up interrupt handler.
So far it was fine as we were not invalidating guest page table
before this point.
Upcoming series will introduce per device GCR3 table and it will
invalidate guest pages after configuring. Hence move GT feature
enablement to early_enable_iommu().
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
.. as IOMMU perf counters are always built as part of kernel.
No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These macros are not used after commit 518d9b4503 ("iommu/amd: Remove
special mapping code for dma_ops path").
No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These macros are not used after commit ac6d704679 ("iommu/dma: Pass
address limit rather than size to iommu_setup_dma_ops()").
No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit
f366a8dac1: ("iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown")
leads to the following Smatch static checker warning:
drivers/iommu/amd/init.c:3820 iommu_page_make_shared() error: uninitialized symbol 'assigned'.
Fix it.
[ bp: Address the other error cases too. ]
Fixes: f366a8dac1 ("iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown")
Closes: https://lore.kernel.org/linux-iommu/1be69f6a-e7e1-45f9-9a74-b2550344f3fd@moroto.mountain
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Joerg Roedel <jroedel@suse.com>
Link: https://lore.kernel.org/lkml/20240126041126.1927228-20-michael.roth@amd.com
Add a new IOMMU API interface amd_iommu_snp_disable() to transition
IOMMU pages to Hypervisor state from Reclaim state after SNP_SHUTDOWN_EX
command. Invoke this API from the CCP driver after SNP_SHUTDOWN_EX
command.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-20-michael.roth@amd.com
Currently, the expectation is that the kernel will call
amd_iommu_snp_enable() to perform various checks and set the
amd_iommu_snp_en flag that the IOMMU uses to adjust its setup routines
to account for additional requirements on hosts where SNP is enabled.
This is somewhat fragile as it relies on this call being done prior to
IOMMU setup. It is more robust to just do this automatically as part of
IOMMU initialization, so rework the code accordingly.
There is still a need to export information about whether or not the
IOMMU is configured in a manner compatible with SNP, so relocate the
existing amd_iommu_snp_en flag so it can be used to convey that
information in place of the return code that was previously provided by
calls to amd_iommu_snp_enable().
While here, also adjust the kernel messages related to IOMMU SNP
enablement for consistency/grammar/clarity.
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-4-michael.roth@amd.com
Including:
- Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to
a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
- ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm SMMU
implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
- Intel VT-d driver:
- Cleanup and refactoring
- AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
- Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
- Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
- Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes
-----BEGIN PGP SIGNATURE-----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=q751
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
A perfect driver would only call dev_iommu_priv_set() from its probe
callback. We've made it functionally correct to call it from the of_xlate
by adding a lock around that call.
lockdep assert that iommu_probe_device_lock is held to discourage misuse.
Exclude PPC kernels with CONFIG_FSL_PAMU turned on because FSL_PAMU uses a
global static for its priv and abuses priv for its domain.
Remove the pointless stores of NULL, all these are on paths where the core
code will free dev->iommu after the op returns.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Enhance __domain_flush_pages() to detect domain page table mode and use
that info to build invalidation commands. So that we can use
amd_iommu_domain_flush_pages() to invalidate v2 page table.
Also pass PASID, gn variable to device_flush_iotlb() so that it can build
IOTLB invalidation command for both v1 and v2 page table.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Rename domain_flush_pages() -> amd_iommu_domain_flush_pages() and make
it as global function.
- Rename amd_iommu_domain_flush_tlb_pde() -> amd_iommu_domain_flush_all()
and make it as static.
- Convert v1 page table (io_pgtble.c) to use amd_iommu_domain_flush_pages().
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Call amd_iommu_domain_flush_complete() from domain_flush_pages().
That way we can remove explicit call of amd_iommu_domain_flush_complete()
from various places.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
build_inv_iotlb_pages() and build_inv_iotlb_pasid() pretty much duplicates
the code. Enhance build_inv_iotlb_pages() to invalidate guest IOTLB as
well. And remove build_inv_iotlb_pasid() function.
Suggested-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
build_inv_iommu_pages() and build_inv_iommu_pasid() pretty much
duplicates the code. Hence enhance build_inv_iommu_pages() to
invalidate guest pages as well. And remove build_inv_iommu_pasid().
Suggested-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current interface supports invalidating single page or entire guest
translation information for a single process address space.
IOMMU CMD_INV_IOMMU_PAGES and CMD_INV_IOTLB_PAGES commands supports
invalidating range of pages. Add support to invalidate multiple pages.
This is preparatory patch before consolidating host and guest
invalidation code into single function. Following patches will
consolidation tlb invalidation code.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current code always sets PDE bit in INVALIDATE_IOMMU_PAGES command.
Hence get rid of 'pde' variable across functions.
We can re-introduce this bit whenever its needed.
Suggested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Domain flush was introduced in attach_device() path to handle kdump
scenario. Later init code was enhanced to handle kdump scenario where
it also takes care of flushing everything including TLB
(see early_enable_iommus()).
Hence remove redundant flush from attach_device() function.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
According to the recent update in the AMD IOMMU spec [1], the IsRun and
Destination fields of the Interrupt Remapping Table Entry (IRTE) are not
cached by the IOMMU hardware.
Therefore, do not issue the INVALIDATE_INTERRUPT_TABLE command when
updating IRTE[IsRun] and IRTE[Destination] when IRTE[GuestMode]=1, which
should help improve IOMMU AVIC/x2AVIC performance.
References:
[1] AMD IOMMU Spec Revision (Rev 3.08-PUB)
(Link: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/specifications/48882_IOMMU.pdf)
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Link: https://lore.kernel.org/r/20231017144236.8287-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix the followng warning:
drivers/iommu/amd/iommu.c:67:30: warning: symbol
'amd_dirty_ops' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231120095342.1102999-1-chentao@kylinos.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This field is set to APIC_DELIVERY_MODE_FIXED in all cases, and is read
exactly once. Fold the constant in uv_program_mmr() and drop the field.
Searching for the origin of the stale HyperV comment reveals commit
a31e58e129 ("x86/apic: Switch all APICs to Fixed delivery mode") which
notes:
As a consequence of this change, the apic::irq_delivery_mode field is
now pointless, but this needs to be cleaned up in a separate patch.
6 years is long enough for this technical debt to have survived.
[ bp: Fold in
https://lore.kernel.org/r/20231121123034.1442059-1-andrew.cooper3@citrix.com
]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20231102-x86-apic-v1-1-bf049a2a0ed6@citrix.com
Including:
- Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate
drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
- ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to
move the CD table into the master, paving the way
for '->set_dev_pasid()' support on non-SVA domains
- Minor cleanups to the SVA code
- Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function.
- AMD IOMMU:
- Initial patches for SVA support (not complete yet)
- S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
- Some smaller fixes and improvements
-----BEGIN PGP SIGNATURE-----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=UyWC
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to move the CD
table into the master, paving the way for '->set_dev_pasid()'
support on non-SVA domains
- Minor cleanups to the SVA code
Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function
AMD IOMMU:
- Initial patches for SVA support (not complete yet)
S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
iommu/dart: Remove the force_bypass variable
iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
iommu/dart: Convert to domain_alloc_paging()
iommu/dart: Move the blocked domain support to a global static
iommu/dart: Use static global identity domains
iommufd: Convert to alloc_domain_paging()
iommu/vt-d: Use ops->blocked_domain
iommu/vt-d: Update the definition of the blocking domain
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Revert "iommu/vt-d: Remove unused function"
iommu/amd: Remove DMA_FQ type from domain allocation path
iommu: change iommu_map_sgtable to return signed values
iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
iommu/vt-d: debugfs: Dump entry pointing to huge page
iommu/vt-d: Remove unused function
iommu/arm-smmu-v3-sva: Remove bond refcount
iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
iommu/arm-smmu-v3: Rename cdcfg to cd_table
...
domain_alloc_user op already accepts user flags for domain allocation, add
a parent domain pointer and a driver specific user data support as well.
The user data would be tagged with a type for iommu drivers to add their
own driver specific user data per hw_pagetable.
Add a struct iommu_user_data as a bundle of data_ptr/data_len/type from an
iommufd core uAPI structure. Make the user data opaque to the core, since
a userspace driver must match the kernel driver. In the future, if drivers
share some common parameter, there would be a generic parameter as well.
Link: https://lore.kernel.org/r/20231026043938.63898-7-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
IOMMU advertises Access/Dirty bits if the extended feature register reports
it. Relevant AMD IOMMU SDM ref[0] "1.3.8 Enhanced Support for Access and
Dirty Bits"
To enable it set the DTE flag in bits 7 and 8 to enable access, or
access+dirty. With that, the IOMMU starts marking the D and A flags on
every Memory Request or ATS translation request. It is on the VMM side to
steer whether to enable dirty tracking or not, rather than wrongly doing in
IOMMU. Relevant AMD IOMMU SDM ref [0], "Table 7. Device Table Entry (DTE)
Field Definitions" particularly the entry "HAD".
To actually toggle on and off it's relatively simple as it's setting 2 bits
on DTE and flush the device DTE cache.
To get what's dirtied use existing AMD io-pgtable support, by walking the
pagetables over each IOVA, with fetch_pte(). The IOTLB flushing is left to
the caller (much like unmap), and iommu_dirty_bitmap_record() is the one
adding page-ranges to invalidate. This allows caller to batch the flush
over a big span of IOVA space, without the iommu wondering about when to
flush.
Worthwhile sections from AMD IOMMU SDM:
"2.2.3.1 Host Access Support"
"2.2.3.2 Host Dirty Support"
For details on how IOMMU hardware updates the dirty bit see, and expects
from its consequent clearing by CPU:
"2.2.7.4 Updating Accessed and Dirty Bits in the Guest Address Tables"
"2.2.7.5 Clearing Accessed and Dirty Bits"
Quoting the SDM:
"The setting of accessed and dirty status bits in the page tables is
visible to both the CPU and the peripheral when sharing guest page tables.
The IOMMU interlocked operations to update A and D bits must be 64-bit
operations and naturally aligned on a 64-bit boundary"
.. and for the IOMMU update sequence to Dirty bit, essentially is states:
1. Decodes the read and write intent from the memory access.
2. If P=0 in the page descriptor, fail the access.
3. Compare the A & D bits in the descriptor with the read and write
intent in the request.
4. If the A or D bits need to be updated in the descriptor:
* Start atomic operation.
* Read the descriptor as a 64-bit access.
* If the descriptor no longer appears to require an update, release the
atomic lock with
no further action and continue to step 5.
* Calculate the new A & D bits.
* Write the descriptor as a 64-bit access.
* End atomic operation.
5. Continue to the next stage of translation or to the memory access.
Access/Dirty bits readout also need to consider the non-default page-sizes
(aka replicated PTEs as mentined by manual), as AMD supports all powers of
two (except 512G) page sizes.
Select IOMMUFD_DRIVER only if IOMMUFD is enabled considering that IOMMU
dirty tracking requires IOMMUFD.
Link: https://lore.kernel.org/r/20231024135109.73787-12-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the domain_alloc_user op implementation. To that end, refactor
amd_iommu_domain_alloc() to receive a dev pointer and flags, while renaming
it too, such that it becomes a common function shared with
domain_alloc_user() implementation. The sole difference with
domain_alloc_user() is that we initialize also other fields that
iommu_domain_alloc() does. It lets it return the iommu domain correctly
initialized in one function.
This is in preparation to add dirty enforcement on AMD implementation of
domain_alloc_user.
Link: https://lore.kernel.org/r/20231024135109.73787-11-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
.. as drivers won't see DMA_FQ any more.
See commit a4fdd97622 ("iommu: Use flush queue capability") for
details.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20231016051305.13091-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Drop EXPORT_SYMBOLS for the functions that are not used by any modules.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No one is using this function. Hence remove it. Also move PCI device
feature detection flags to amd_iommu_types.h as its only used inside
AMD IOMMU driver.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove PPR handler and notifier related functions as its not used
anymore. Note that we are retaining PPR interrupt handler support
as it will be re-used when we introduce IOPF support.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD GPU driver which was the only in-kernel user of iommu_v2 module
removed dependency on iommu_v2 module.
Also we are working on adding SVA support in AMD IOMMU driver. Device
drivers are expected to use common SVA framework to enable device
PASID/PRI features.
Removing iommu_v2 module and then adding SVA simplifies the development.
Hence remove iommu_v2 module.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On s390 when using a paging hypervisor, .iotlb_sync_map is used to sync
mappings by letting the hypervisor inspect the synced IOVA range and
updating a shadow table. This however means that .iotlb_sync_map can
fail as the hypervisor may run out of resources while doing the sync.
This can be due to the hypervisor being unable to pin guest pages, due
to a limit on mapped addresses such as vfio_iommu_type1.dma_entry_limit
or lack of other resources. Either way such a failure to sync a mapping
should result in a DMA_MAPPING_ERROR.
Now especially when running with batched IOTLB flushes for unmap it may
be that some IOVAs have already been invalidated but not yet synced via
.iotlb_sync_map. Thus if the hypervisor indicates running out of
resources, first do a global flush allowing the hypervisor to free
resources associated with these mappings as well a retry creating the
new mappings and only if that also fails report this error to callers.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun50i
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230928-dma_iommu-v13-1-9e5fc4dacc36@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 1adf3cc20d ("iommu: Add max_pasids field in struct iommu_device")
introduced a variable struct iommu_device.max_pasids to track max
PASIDS supported by each IOMMU.
Let us initialize this field for AMD IOMMU. IOMMU core will use this value
to set max PASIDs per device (see __iommu_probe_device()).
Also remove unused global 'amd_iommu_max_pasid' variable.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-15-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce helper functions to enable/disable device ATS/PASID/PRI
capabilities independently along with the new pasid_enabled and
pri_enabled variables in struct iommu_dev_data to keep track,
which allows attach_device() and detach_device() to be simplified.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-14-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently we use struct iommu_dev_data.iommu_v2 to keep track of the device
ATS, PRI, and PASID capabilities. But these capabilities can be enabled
independently (except PRI requires ATS support). Hence, replace
the iommu_v2 variable with a flags variable, which keep track of the device
capabilities.
From commit 9bf49e36d7 ("PCI/ATS: Handle sharing of PF PRI Capability
with all VFs"), device PRI/PASID is shared between PF and any associated
VFs. Hence use pci_pri_supported() and pci_pasid_features() instead of
pci_find_ext_capability() to check device PRI/PASID support.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-13-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For AMD IOMMU, the PPR feature is needed to support IO page fault (IOPF).
PPR is enabled per PCI end-point device, and is configured by the PPR bit
in the IOMMU device table entry (i.e DTE[PPR]).
Introducing struct iommu_dev_data.ppr track PPR setting for each device.
Also iommu_dev_data.ppr will be set only when IOMMU supports PPR. Hence
remove redundant feature support check in set_dte_entry().
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-12-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove nested structure and make it as 'ats_{enable/qdep}'.
Also convert 'dev_data.pri_tlp' to bit field.
No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-11-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In order to support v2 page table, IOMMU driver need to check if the
hardware can support Guest Translation (GT) and Peripheral Page Request
(PPR) features. Currently, IOMMU driver uses global (amd_iommu_v2_present)
and per-iommu (struct amd_iommu.is_iommu_v2) variables to track the
features. There variables area redundant since we could simply just check
the global EFR mask.
Therefore, replace it with a helper function with appropriate name.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, IOMMU driver assumes capabilities on all IOMMU instances to be
homogeneous. During early_amd_iommu_init(), the driver probes all IVHD
blocks and do sanity check to make sure that only features common among all
IOMMU instances are supported. This is tracked in the global amd_iommu_efr
and amd_iommu_efr2, which should be used whenever the driver need to check
hardware capabilities.
Therefore, introduce check_feature() and check_feature2(), and modify
the driver to adopt the new helper functions.
In addition, clean up the print_iommu_info() to avoid reporting redundant
EFR/EFR2 for each IOMMU instance.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
* Use the protection_domain_free() helper function to free domain.
The function has been modified to also free memory used for the v1 and v2
page tables. Also clear gcr3 table in v2 page table free path.
* Refactor code into cleanup_domain() for reusability. Change BUG_ON to
WARN_ON in cleanup path.
* Protection domain dev_cnt should be read when the domain is locked.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since AMD IOMMU page table is not used in passthrough mode, switching to
v1 page table is not required.
Therefore, remove redundant amd_iommu_pgtable update and misleading
warning message.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Refactor domain_enable_v2() into helper functions for managing GCR3 table
(i.e. setup_gcr3_table() and get_gcr3_levels()), which will be used in
subsequent patches. Also re-arrange code and remove forward declaration.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To replace if-else with switch-case statement due to increasing number of
domain types.
No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the logic into the common caller function to simplify the code.
No functional changes intended.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It has been no longer used since the commit 6eedb59c18 ("iommu/amd:
Remove amd_iommu_domain_get_pgtable").
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
