- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
LoongArch:
- Add stat information for in-kernel irqchip
- Add tracepoints for CPUCFG and CSR emulation exits
- Enhance in-kernel irqchip emulation
- Various cleanups.
RISC-V:
- Enable ring-based dirty memory tracking
- Improve perf kvm stat to report interrupt events
- Delegate illegal instruction trap to VS-mode
- MMU improvements related to upcoming nested virtualization
s390x
- Fixes
x86:
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC,
PIC, and PIT emulation at compile time.
- Share device posted IRQ code between SVM and VMX and
harden it against bugs and runtime errors.
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1)
instead of O(n).
- For MMIO stale data mitigation, track whether or not a vCPU has access to
(host) MMIO based on whether the page tables have MMIO pfns mapped; using
VFIO is prone to false negatives
- Rework the MSR interception code so that the SVM and VMX APIs are more or
less identical.
- Recalculate all MSR intercepts from scratch on MSR filter changes,
instead of maintaining shadow bitmaps.
- Advertise support for LKGS (Load Kernel GS base), a new instruction
that's loosely related to FRED, but is supported and enumerated
independently.
- Fix a user-triggerable WARN that syzkaller found by setting the vCPU
in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU
into VMX Root Mode (post-VMXON). Trying to detect every possible path
leading to architecturally forbidden states is hard and even risks
breaking userspace (if it goes from valid to valid state but passes
through invalid states), so just wait until KVM_RUN to detect that
the vCPU state isn't allowed.
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of
APERF/MPERF reads, so that a "properly" configured VM can access
APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed
on vCPU creation or saved/restored on suspend and resume, or preserved
over thread migration let alone VM migration) but can be useful whenever
you're interested in letting Linux guests see the effective physical CPU
frequency in /proc/cpuinfo.
- Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been
created, as there's no known use case for changing the default
frequency for other VM types and it goes counter to the very reason
why the ioctl was added to the vm file descriptor. And also, there
would be no way to make it work for confidential VMs with a "secure"
TSC, so kill two birds with one stone.
- Dynamically allocation the shadow MMU's hashed page list, and defer
allocating the hashed list until it's actually needed (the TDP MMU
doesn't use the list).
- Extract many of KVM's helpers for accessing architectural local APIC
state to common x86 so that they can be shared by guest-side code for
Secure AVIC.
- Various cleanups and fixes.
x86 (Intel):
- Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest.
Failure to honor FREEZE_IN_SMM can leak host state into guests.
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent
L1 from running L2 with features that KVM doesn't support, e.g. BTF.
x86 (AMD):
- WARN and reject loading kvm-amd.ko instead of panicking the kernel if the
nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty
much a static condition and therefore should never happen, but still).
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code.
- Inhibit AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation.
- Extend enable_ipiv module param support to SVM, by simply leaving
IsRunning clear in the vCPU's physical ID table entry.
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected by
erratum #1235, to allow (safely) enabling AVIC on such CPUs.
- Request GA Log interrupts if and only if the target vCPU is blocking,
i.e. only if KVM needs a notification in order to wake the vCPU.
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the
vCPU's CPUID model.
- Accept any SNP policy that is accepted by the firmware with respect to
SMT and single-socket restrictions. An incompatible policy doesn't put
the kernel at risk in any way, so there's no reason for KVM to care.
- Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and
use WBNOINVD instead of WBINVD when possible for SEV cache maintenance.
- When reclaiming memory from an SEV guest, only do cache flushes on CPUs
that have ever run a vCPU for the guest, i.e. don't flush the caches for
CPUs that can't possibly have cache lines with dirty, encrypted data.
Generic:
- Rework irqbypass to track/match producers and consumers via an xarray
instead of a linked list. Using a linked list leads to O(n^2) insertion
times, which is hugely problematic for use cases that create large
numbers of VMs. Such use cases typically don't actually use irqbypass,
but eliminating the pointless registration is a future problem to
solve as it likely requires new uAPI.
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *",
to avoid making a simple concept unnecessarily difficult to understand.
- Decouple device posted IRQs from VFIO device assignment, as binding a VM
to a VFIO group is not a requirement for enabling device posted IRQs.
- Clean up and document/comment the irqfd assignment code.
- Disallow binding multiple irqfds to an eventfd with a priority waiter,
i.e. ensure an eventfd is bound to at most one irqfd through the entire
host, and add a selftest to verify eventfd:irqfd bindings are globally
unique.
- Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues
related to private <=> shared memory conversions.
- Drop guest_memfd's .getattr() implementation as the VFS layer will call
generic_fillattr() if inode_operations.getattr is NULL.
- Fix issues with dirty ring harvesting where KVM doesn't bound the
processing of entries in any way, which allows userspace to keep KVM
in a tight loop indefinitely.
- Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking,
now that KVM no longer uses assigned_device_count as a heuristic for
either irqbypass usage or MDS mitigation.
Selftests:
- Fix a comment typo.
- Verify KVM is loaded when getting any KVM module param so that attempting
to run a selftest without kvm.ko loaded results in a SKIP message about
KVM not being loaded/enabled (versus some random parameter not existing).
- Skip tests that hit EACCES when attempting to access a file, and rpint
a "Root required?" help message. In most cases, the test just needs to
be run with elevated permissions.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmiKXMgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhMQf/QDhC/CP1aGXph2whuyeD2NMqPKiU
9KdnDNST+ftPwjg9QxZ9mTaa8zeVz/wly6XlxD9OQHy+opM1wcys3k0GZAFFEEQm
YrThgURdzEZ3nwJZgb+m0t4wjJQtpiFIBwAf7qq6z1VrqQBEmHXJ/8QxGuqO+BNC
j5q/X+q6KZwehKI6lgFBrrOKWFaxqhnRAYfW6rGBxRXxzTJuna37fvDpodQnNceN
zOiq+avfriUMArTXTqOteJNKU0229HjiPSnjILLnFQ+B3akBlwNG0jk7TMaAKR6q
IZWG1EIS9q1BAkGXaw6DE1y6d/YwtXCR5qgAIkiGwaPt5yj9Oj6kRN2Ytw==
=j2At
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on
hardware that previously advertised it unconditionally
- Map supporting endpoints with cacheable memory attributes on
systems with FEAT_S2FWB and DIC where KVM no longer needs to
perform cache maintenance on the address range
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the
guest hypervisor to inject external aborts into an L2 VM and take
traps of masked external aborts to the hypervisor
- Convert more system register sanitization to the config-driven
implementation
- Fixes to the visibility of EL2 registers, namely making VGICv3
system registers accessible through the VGIC device instead of the
ONE_REG vCPU ioctls
- Various cleanups and minor fixes
LoongArch:
- Add stat information for in-kernel irqchip
- Add tracepoints for CPUCFG and CSR emulation exits
- Enhance in-kernel irqchip emulation
- Various cleanups
RISC-V:
- Enable ring-based dirty memory tracking
- Improve perf kvm stat to report interrupt events
- Delegate illegal instruction trap to VS-mode
- MMU improvements related to upcoming nested virtualization
s390x
- Fixes
x86:
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O
APIC, PIC, and PIT emulation at compile time
- Share device posted IRQ code between SVM and VMX and harden it
against bugs and runtime errors
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups
O(1) instead of O(n)
- For MMIO stale data mitigation, track whether or not a vCPU has
access to (host) MMIO based on whether the page tables have MMIO
pfns mapped; using VFIO is prone to false negatives
- Rework the MSR interception code so that the SVM and VMX APIs are
more or less identical
- Recalculate all MSR intercepts from scratch on MSR filter changes,
instead of maintaining shadow bitmaps
- Advertise support for LKGS (Load Kernel GS base), a new instruction
that's loosely related to FRED, but is supported and enumerated
independently
- Fix a user-triggerable WARN that syzkaller found by setting the
vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting
the vCPU into VMX Root Mode (post-VMXON). Trying to detect every
possible path leading to architecturally forbidden states is hard
and even risks breaking userspace (if it goes from valid to valid
state but passes through invalid states), so just wait until
KVM_RUN to detect that the vCPU state isn't allowed
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling
interception of APERF/MPERF reads, so that a "properly" configured
VM can access APERF/MPERF. This has many caveats (APERF/MPERF
cannot be zeroed on vCPU creation or saved/restored on suspend and
resume, or preserved over thread migration let alone VM migration)
but can be useful whenever you're interested in letting Linux
guests see the effective physical CPU frequency in /proc/cpuinfo
- Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been
created, as there's no known use case for changing the default
frequency for other VM types and it goes counter to the very reason
why the ioctl was added to the vm file descriptor. And also, there
would be no way to make it work for confidential VMs with a
"secure" TSC, so kill two birds with one stone
- Dynamically allocation the shadow MMU's hashed page list, and defer
allocating the hashed list until it's actually needed (the TDP MMU
doesn't use the list)
- Extract many of KVM's helpers for accessing architectural local
APIC state to common x86 so that they can be shared by guest-side
code for Secure AVIC
- Various cleanups and fixes
x86 (Intel):
- Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest.
Failure to honor FREEZE_IN_SMM can leak host state into guests
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to
prevent L1 from running L2 with features that KVM doesn't support,
e.g. BTF
x86 (AMD):
- WARN and reject loading kvm-amd.ko instead of panicking the kernel
if the nested SVM MSRPM offsets tracker can't handle an MSR (which
is pretty much a static condition and therefore should never
happen, but still)
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code
- Inhibit AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation
- Extend enable_ipiv module param support to SVM, by simply leaving
IsRunning clear in the vCPU's physical ID table entry
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected
by erratum #1235, to allow (safely) enabling AVIC on such CPUs
- Request GA Log interrupts if and only if the target vCPU is
blocking, i.e. only if KVM needs a notification in order to wake
the vCPU
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to
the vCPU's CPUID model
- Accept any SNP policy that is accepted by the firmware with respect
to SMT and single-socket restrictions. An incompatible policy
doesn't put the kernel at risk in any way, so there's no reason for
KVM to care
- Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and
use WBNOINVD instead of WBINVD when possible for SEV cache
maintenance
- When reclaiming memory from an SEV guest, only do cache flushes on
CPUs that have ever run a vCPU for the guest, i.e. don't flush the
caches for CPUs that can't possibly have cache lines with dirty,
encrypted data
Generic:
- Rework irqbypass to track/match producers and consumers via an
xarray instead of a linked list. Using a linked list leads to
O(n^2) insertion times, which is hugely problematic for use cases
that create large numbers of VMs. Such use cases typically don't
actually use irqbypass, but eliminating the pointless registration
is a future problem to solve as it likely requires new uAPI
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a
"void *", to avoid making a simple concept unnecessarily difficult
to understand
- Decouple device posted IRQs from VFIO device assignment, as binding
a VM to a VFIO group is not a requirement for enabling device
posted IRQs
- Clean up and document/comment the irqfd assignment code
- Disallow binding multiple irqfds to an eventfd with a priority
waiter, i.e. ensure an eventfd is bound to at most one irqfd
through the entire host, and add a selftest to verify eventfd:irqfd
bindings are globally unique
- Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues
related to private <=> shared memory conversions
- Drop guest_memfd's .getattr() implementation as the VFS layer will
call generic_fillattr() if inode_operations.getattr is NULL
- Fix issues with dirty ring harvesting where KVM doesn't bound the
processing of entries in any way, which allows userspace to keep
KVM in a tight loop indefinitely
- Kill off kvm_arch_{start,end}_assignment() and x86's associated
tracking, now that KVM no longer uses assigned_device_count as a
heuristic for either irqbypass usage or MDS mitigation
Selftests:
- Fix a comment typo
- Verify KVM is loaded when getting any KVM module param so that
attempting to run a selftest without kvm.ko loaded results in a
SKIP message about KVM not being loaded/enabled (versus some random
parameter not existing)
- Skip tests that hit EACCES when attempting to access a file, and
print a "Root required?" help message. In most cases, the test just
needs to be run with elevated permissions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits)
Documentation: KVM: Use unordered list for pre-init VGIC registers
RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map()
RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs
RISC-V: perf/kvm: Add reporting of interrupt events
RISC-V: KVM: Enable ring-based dirty memory tracking
RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap
RISC-V: KVM: Delegate illegal instruction fault to VS mode
RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs
RISC-V: KVM: Factor-out g-stage page table management
RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence
RISC-V: KVM: Introduce struct kvm_gstage_mapping
RISC-V: KVM: Factor-out MMU related declarations into separate headers
RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect()
RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range()
RISC-V: KVM: Don't flush TLB when PTE is unchanged
RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH
RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize()
RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init()
RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value
KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list
...
* amd/amd-vi:
iommu/amd: Fix geometry.aperture_end for V2 tables
iommu/amd: Wrap debugfs ABI testing symbols snippets in literal code blocks
iommu/amd: Add documentation for AMD IOMMU debugfs support
iommu/amd: Add debugfs support to dump IRT Table
iommu/amd: Add debugfs support to dump device table
iommu/amd: Add support for device id user input
iommu/amd: Add debugfs support to dump IOMMU command buffer
iommu/amd: Add debugfs support to dump IOMMU Capability registers
iommu/amd: Add debugfs support to dump IOMMU MMIO registers
iommu/amd: Refactor AMD IOMMU debugfs initial setup
iommu/amd: Enable PASID and ATS capabilities in the correct order
iommu/amd: Add efr[HATS] max v1 page table level
iommu/amd: Add HATDis feature support
The AMD IOMMU documentation seems pretty clear that the V2 table follows
the normal CPU expectation of sign extension. This is shown in
Figure 25: AMD64 Long Mode 4-Kbyte Page Address Translation
Where bits Sign-Extend [63:57] == [56]. This is typical for x86 which
would have three regions in the page table: lower, non-canonical, upper.
The manual describes that the V1 table does not sign extend in section
2.2.4 Sharing AMD64 Processor and IOMMU Page Tables GPA-to-SPA
Further, Vasant has checked this and indicates the HW has an addtional
behavior that the manual does not yet describe. The AMDv2 table does not
have the sign extended behavior when attached to PASID 0, which may
explain why this has gone unnoticed.
The iommu domain geometry does not directly support sign extended page
tables. The driver should report only one of the lower/upper spaces. Solve
this by removing the top VA bit from the geometry to use only the lower
space.
This will also make the iommu_domain work consistently on all PASID 0 and
PASID != 1.
Adjust dma_max_address() to remove the top VA bit. It now returns:
5 Level:
Before 0x1ffffffffffffff
After 0x0ffffffffffffff
4 Level:
Before 0xffffffffffff
After 0x7fffffffffff
Fixes: 11c439a194 ("iommu/amd/pgtbl_v2: Fix domain max address")
Link: https://lore.kernel.org/all/8858d4d6-d360-4ef0-935c-bfd13ea54f42@amd.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v2-0615cc99b88a+1ce-amdv2_geo_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
In cases where we have an issue in the device interrupt path with IOMMU
interrupt remapping enabled, dumping valid IRT table entries for the device
is very useful and good input for debugging the issue.
eg.
-> To dump irte entries for a particular device
#echo "c4:00.0" > /sys/kernel/debug/iommu/amd/devid
#cat /sys/kernel/debug/iommu/amd/irqtbl | less
or
#echo "0000:c4:00.0" > /sys/kernel/debug/iommu/amd/devid
#cat /sys/kernel/debug/iommu/amd/irqtbl | less
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-8-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
IOMMU uses device table data structure to get per-device information for
DMA remapping, interrupt remapping, and other functionalities. It's a
valuable data structure to visualize for debugging issues related to
IOMMU.
eg.
-> To dump device table entry for a particular device
#echo 0000:c4:00.0 > /sys/kernel/debug/iommu/amd/devid
#cat /sys/kernel/debug/iommu/amd/devtbl
or
#echo c4:00.0 > /sys/kernel/debug/iommu/amd/devid
#cat /sys/kernel/debug/iommu/amd/devtbl
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-7-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Dumping IOMMU data structures like device table, IRT, etc., for all devices
on the system will be a lot of data dumped in a file. Also, user may want
to dump and analyze these data structures just for one or few devices. So
dumping IOMMU data structures like device table, IRT etc for all devices
is not a good approach.
Add "device id" user input to be used for dumping IOMMU data structures
like device table, IRT etc in AMD IOMMU debugfs.
eg.
1. # echo 0000:01:00.0 > /sys/kernel/debug/iommu/amd/devid
# cat /sys/kernel/debug/iommu/amd/devid
Output : 0000:01:00.0
2. # echo 01:00.0 > /sys/kernel/debug/iommu/amd/devid
# cat /sys/kernel/debug/iommu/amd/devid
Output : 0000:01:00.0
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-6-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
IOMMU driver sends command to IOMMU hardware via command buffer. In cases
where IOMMU hardware fails to process commands in command buffer, dumping
it is a valuable input to debug the issue.
IOMMU hardware processes command buffer entry at offset equals to the head
pointer. Dumping just the entry at the head pointer may not always be
useful. The current head may not be pointing to the entry of the command
buffer which is causing the issue. IOMMU Hardware may have processed the
entry and updated the head pointer. So dumping the entire command buffer
gives a broad understanding of what hardware was/is doing. The command
buffer dump will have all entries from start to end of the command buffer.
Along with that, it will have a head and tail command buffer pointer
register dump to facilitate where the IOMMU driver and hardware are in
the command buffer for injecting and processing the entries respectively.
Command buffer is a per IOMMU data structure. So dumping on per IOMMU
basis.
eg.
-> To get command buffer dump for iommu<x> (say, iommu00)
#cat /sys/kernel/debug/iommu/amd/iommu00/cmdbuf
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-5-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
IOMMU Capability registers defines capabilities of IOMMU and information
needed for initialising MMIO registers and device table. This is useful
to dump these registers for debugging IOMMU related issues.
e.g.
-> To get capability registers value at offset 0x10 for iommu<x> (say,
iommu00)
# echo "0x10" > /sys/kernel/debug/iommu/amd/iommu00/capability
# cat /sys/kernel/debug/iommu/amd/iommu00/capability
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-4-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Analyzing IOMMU MMIO registers gives a view of what IOMMU is
configured with on the system and is helpful to debug issues
with IOMMU.
eg.
-> To get mmio registers value at offset 0x18 for iommu<x> (say, iommu00)
# echo "0x18" > /sys/kernel/debug/iommu/amd/iommu00/mmio
# cat /sys/kernel/debug/iommu/amd/iommu00/mmio
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-3-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Rearrange initial setup of AMD IOMMU debugfs to segregate per IOMMU
setup and setup which is common for all IOMMUs. This ensures that common
debugfs paths (introduced in subsequent patches) are created only once
instead of being created for each IOMMU.
With the change, there is no need to use lock as amd_iommu_debugfs_setup()
will be called only once during AMD IOMMU initialization. So remove lock
acquisition in amd_iommu_debugfs_setup().
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-2-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Per the PCIe spec, behavior of the PASID capability is undefined if the
value of the PASID Enable bit changes while the Enable bit of the
function's ATS control register is Set. Unfortunately,
pdev_enable_caps() does exactly that by ordering enabling ATS for the
device before enabling PASID.
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: eda8c2860a ("iommu/amd: Enable device ATS/PASID/PRI capabilities independently")
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250703155433.6221-1-eahariha@linux.microsoft.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The EFR[HATS] bits indicate maximum host translation level supported by
IOMMU. Adding support to set the maximum host page table level as indicated
by EFR[HATS]. If the HATS=11b (reserved), the driver will attempt to use
guest page table for DMA API.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Link: https://lore.kernel.org/r/df0f8562c2a20895cc185c86f1a02c4d826fd597.1749016436.git.Ankit.Soni@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Current AMD IOMMU assumes Host Address Translation (HAT) is always
supported, and Linux kernel enables this capability by default. However,
in case of emulated and virtualized IOMMU, this might not be the case.
For example,current QEMU-emulated AMD vIOMMU does not support host
translation for VFIO pass-through device, but the interrupt remapping
support is required for x2APIC (i.e. kvm-msi-ext-dest-id is also not
supported by the guest OS). This would require the guest kernel to boot
with guest kernel option iommu=pt to by-pass the initialization of
host (v1) table.
The AMD I/O Virtualization Technology (IOMMU) Specification Rev 3.10 [1]
introduces a new flag 'HATDis' in the IVHD 11h IOMMU attributes to indicate
that HAT is not supported on a particular IOMMU instance.
Therefore, modifies the AMD IOMMU driver to detect the new HATDis
attributes, and disable host translation and switch to use guest
translation if it is available. Otherwise, the driver will disable DMA
translation.
[1] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/specifications/48882_IOMMU.pdf
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Link: https://lore.kernel.org/r/8109b208f87b80e400c2abd24a2e44fcbc0763a5.1749016436.git.Ankit.Soni@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add plumbing to the AMD IOMMU driver to allow KVM to control whether or
not an IRTE is configured to generate GA log interrupts. KVM only needs a
notification if the target vCPU is blocking, so the vCPU can be awakened.
If a vCPU is preempted or exits to userspace, KVM clears is_run, but will
set the vCPU back to running when userspace does KVM_RUN and/or the vCPU
task is scheduled back in, i.e. KVM doesn't need a notification.
Unconditionally pass "true" in all KVM paths to isolate the IOMMU changes
from the KVM changes insofar as possible.
Opportunistically swap the ordering of parameters for amd_iommu_update_ga()
so that the match amd_iommu_activate_guest_mode().
Note, as of this writing, the AMD IOMMU manual doesn't list GALogIntr as
a non-cached field, but per AMD hardware architects, it's not cached and
can be safely updated without an invalidation.
Link: https://lore.kernel.org/all/b29b8c22-2fd4-4b5e-b755-9198874157c7@amd.com
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20250611224604.313496-62-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
WARN if KVM attempts to update IRTE entries when virtual APIC isn't fully
supported, as KVM should guard all such calls on IRQ posting being enabled.
Link: https://lore.kernel.org/r/20250611224604.313496-58-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If an IRQ can be posted to a vCPU, but AVIC is currently inhibited on the
vCPU, go through the dance of "affining" the IRTE to the vCPU, but leave
the actual IRTE in remapped mode. KVM already handles the case where AVIC
is inhibited => uninhibited with posted IRQs (see avic_set_pi_irte_mode()),
but doesn't handle the scenario where a postable IRQ comes along while AVIC
is inhibited.
Link: https://lore.kernel.org/r/20250611224604.313496-45-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that setting vCPU affinity is guarded with ir_list_lock, i.e. now that
avic_physical_id_entry can be safely accessed, set the pCPU info
straight-away when setting vCPU affinity. Putting the IRTE into posted
mode, and then immediately updating the IRTE a second time if the target
vCPU is running is wasteful and confusing.
This also fixes a flaw where a posted IRQ that arrives between putting
the IRTE into guest_mode and setting the correct destination could cause
the IOMMU to ring the doorbell on the wrong pCPU.
Link: https://lore.kernel.org/r/20250611224604.313496-44-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Split the guts of amd_iommu_update_ga() to a dedicated helper so that the
logic can be shared with flows that put the IRTE into posted mode.
Opportunistically move amd_iommu_update_ga() and its new helper above
amd_iommu_activate_guest_mode() so that it's all co-located.
Link: https://lore.kernel.org/r/20250611224604.313496-43-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Infer whether or not a vCPU should be marked running from the validity of
the pCPU on which it is running. amd_iommu_update_ga() already skips the
IRTE update if the pCPU is invalid, i.e. passing %true for is_run with an
invalid pCPU would be a blatant and egregrious KVM bug.
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Link: https://lore.kernel.org/r/20250611224604.313496-42-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a comment to amd_iommu_update_ga() to document what fields it can
safely modify without issuing an invalidation of the IRTE, and to explain
its role in keeping GA IRTEs up-to-date.
Per page 93 of the IOMMU spec dated Feb 2025:
When virtual interrupts are enabled by setting MMIO Offset 0018h[GAEn] and
IRTE[GuestMode=1], IRTE[IsRun], IRTE[Destination], and if present IRTE[GATag],
are not cached by the IOMMU. Modifications to these fields do not require an
invalidation of the Interrupt Remapping Table.
Link: https://lore.kernel.org/all/9b7ceea3-8c47-4383-ad9c-1a9bbdc9044a@oracle.com
Cc: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20250611224604.313496-41-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Split the vcpu_data structure that serves as a handoff from KVM to IOMMU
drivers into vendor specific structures. Overloading a single structure
makes the code hard to read and maintain, is *very* misleading as it
suggests that mixing vendors is actually supported, and bastardizing
Intel's posted interrupt descriptor address when AMD's IOMMU already has
its own structure is quite unnecessary.
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Link: https://lore.kernel.org/r/20250611224604.313496-33-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pass NULL to amd_ir_set_vcpu_affinity() to communicate "don't post to a
vCPU" now that there's no need to communicate information back to KVM
about the previous vCPU (KVM does its own tracking).
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Link: https://lore.kernel.org/r/20250611224604.313496-24-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use vcpu_data.pi_desc_addr instead of amd_iommu_pi_data.base to get the
GA root pointer. KVM is the only source of amd_iommu_pi_data.base, and
KVM's one and only path for writing amd_iommu_pi_data.base computes the
exact same value for vcpu_data.pi_desc_addr and amd_iommu_pi_data.base,
and fills amd_iommu_pi_data.base if and only if vcpu_data.pi_desc_addr is
valid, i.e. amd_iommu_pi_data.base is fully redundant.
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Link: https://lore.kernel.org/r/20250611224604.313496-23-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Delete the amd_ir_data.prev_ga_tag field now that all usage is
superfluous.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Link: https://lore.kernel.org/r/20250611224604.313496-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
A BIOS upgrade has changed the IVRS DTE UID for a device that no
longer matches the UID in the SSDT. In this case there is only
one ACPI device on the system with that _HID but the _UID mismatch.
IVRS:
```
Subtable Type : F0 [Device Entry: ACPI HID Named Device]
Device ID : 0060
Data Setting (decoded below) : 40
INITPass : 0
EIntPass : 0
NMIPass : 0
Reserved : 0
System MGMT : 0
LINT0 Pass : 1
LINT1 Pass : 0
ACPI HID : "MSFT0201"
ACPI CID : 0000000000000000
UID Format : 02
UID Length : 09
UID : "\_SB.MHSP"
```
SSDT:
```
Device (MHSP)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "MSFT0201") // _HID: Hardware ID
Name (_UID, One) // _UID: Unique ID
```
To handle this case; while enumerating ACPI devices in
get_acpihid_device_id() count the number of matching ACPI devices with
a matching _HID. If there is exactly one _HID match then accept it even
if the UID doesn't match. Other operating systems allow this, but the
current IVRS spec leaves some ambiguity whether to allow or disallow it.
This should be clarified in future revisions of the spec. Output
'Firmware Bug' for this case to encourage it to be solved in the BIOS.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250512173129.1274275-1-superm1@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Nothing in there is active if CONFIG_AMD_IOMMU is not enabled, so the whole
directory can depend on that switch as well.
Fixes: cbe94c6e1a ("iommu/amd: Move Kconfig and Makefile bits down into amd directory")
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1894970.atdPhlSkOF@devpool92.emlix.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 991de2e590 ("PCI, x86: Implement pcibios_alloc_irq() and
pcibios_free_irq()") changed IRQ handling on PCI driver probing.
It inadvertently broke resume from system sleep on AMD platforms:
https://lore.kernel.org/r/20150926164651.GA3640@pd.tnic/
This was fixed by two independent commits:
* 8affb487d4 ("x86/PCI: Don't alloc pcibios-irq when MSI is enabled")
* cbbc00be2c ("iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices")
The breaking change and one of these two fixes were subsequently reverted:
* fe25d07887 ("Revert "x86/PCI: Don't alloc pcibios-irq when MSI is enabled"")
* 6c777e8799 ("Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"")
This rendered the second fix unnecessary, so revert it as well. It used
the match_driver flag in struct pci_dev, which is internal to the PCI core
and not supposed to be touched by arbitrary drivers.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://patch.msgid.link/9a3ddff5cc49512044f963ba0904347bd404094d.1745572340.git.lukas@wunner.de
AMD IOMMU reserves the address range 0xfd00000000-0xffffffffff for
the hypertransport protocol (HT) and has special meaning. Hence devices
cannot use this address range for the DMA. However on some AMD platforms
this HT range is shifted to the very top of the address space and new
feature bit `HTRangeIgnore` is introduced. When this feature bit is on,
IOMMU treats the GPA access to the legacy HT range as regular GPA access.
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250317055020.25214-1-sarunkod@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Synchronize RCU when unregistering KVM's GA log notifier to ensure all
in-flight interrupt handlers complete before KVM-the module is unloaded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250315031048.2374109-1-seanjc@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No external drivers use these interfaces anymore. Furthermore, no existing
iommu drivers implement anything in the callbacks. Remove them to avoid
dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20250418080130.1844424-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
None of the drivers implement anything here anymore, remove the dead code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20250418080130.1844424-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
WARN if KVM attempts to set vCPU affinity when posted interrupts aren't
enabled, as KVM shouldn't try to enable posting when they're unsupported,
and the IOMMU driver darn well should only advertise posting support when
AMD_IOMMU_GUEST_IR_VAPIC() is true.
Note, KVM consumes is_guest_mode only on success.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return -EINVAL instead of success if amd_ir_set_vcpu_affinity() is
invoked without use_vapic; lying to KVM about whether or not the IRTE was
configured to post IRQs is all kinds of bad.
Fixes: d98de49a53 ("iommu/amd: Enable vAPIC interrupt remapping mode by default")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a string parsing logic error which can lead to an overflow of hid
or uid buffers. Comparing ACPIID_LEN against a total string length doesn't
take into account the lengths of individual hid and uid buffers so the
check is insufficient in some cases. For example if the length of hid
string is 4 and the length of the uid string is 260, the length of str
will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer
which size is 256.
The same applies to the hid string with length 13 and uid string with
length 250.
Check the length of hid and uid strings separately to prevent
buffer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ca3bf5d47c ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Paklov <Pavel.Paklov@cyberprotect.ru>
Link: https://lore.kernel.org/r/20250325092259.392844-1-Pavel.Paklov@cyberprotect.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use iommu_alloc_pages_node_sz() instead.
AMD and Intel are both using 4K pages for these structures since those
drivers only work on 4K PAGE_SIZE.
riscv is also spec'd to use SZ_4K.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/21-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert most of the places calling get_order() as an argument to the
iommu-pages allocator into order_base_2() or the _sz flavour
instead. These places already have an exact size, there is no particular
reason to use order here.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/19-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If x >= PAGE_SIZE then:
1 << (get_order(x) + PAGE_SHIFT) == roundup_pow_two()
Inline this into the only caller, compute the size of the HW device table
in terms of 4K pages which matches the HW definition.
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/17-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is just CPU memory used by the driver to track things, it doesn't
need to use iommu-pages. All of them are indexed by devid and devid is
bounded by pci_seg->last_bdf or we are already out of bounds on the page
allocation.
Switch them to use some version of kvmalloc_array() and drop the now
unused constants and remove the tbl_size() round up to PAGE_SIZE multiples
logic.
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/16-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Change the internal freelist to use struct iommu_pages_list.
AMD uses the freelist to batch free the entire table during domain
destruction, and to replace table levels with leafs during map.
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that we have a folio under the allocation iommu_free_pages() can know
the order of the original allocation and do the correct thing to free it.
The next patch will rename iommu_free_page() to iommu_free_pages() so we
have naming consistency with iommu_alloc_pages_node().
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD IOMMU optionally supports up to 2K interrupts per function on newer
platforms. Support for this feature is indicated through Extended
Feature 2 Register (MMIO Offset 01A0h[NumIntRemapSup]). Allocate 2K IRTEs
per device when this support is available.
Co-developed-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250307095822.2274-5-sarunkod@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD iommu can support both 512 and 2K interrupts on newer platform. Hence
add suffix "512" to the existing macros.
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250307095822.2274-4-sarunkod@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 05152a0494 ("iommu/amd: Add slab-cache for irq remapping tables")
introduces slab cache allocator. But slab cache allocator provides benefit
only when the allocation and deallocation of many identical objects is
frequent. The AMD IOMMU driver allocates Interrupt remapping table (IRT)
when device driver requests IRQ for the first time and never frees it.
Hence the slab allocator does not provide any benefit here.
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250307095822.2274-3-sarunkod@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
