Here is the big set of char/misc/iio and other smaller driver subsystems
for 6.17-rc1. It's a big set this time around, with the huge majority
being in the iio subsystem with new drivers and dts files being added
there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeYDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3dwCdF6xoEVZaDkLM5IF3XKWWgdYxjNsAoKUy2kUx
YtmVh4S0tMmugfeRGac7
=3Wxi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
Add documentation and driver for the interconnect on the Milos SoC.
* icc-milos
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
interconnect: qcom: Add Milos interconnect provider driver
Link: https://lore.kernel.org/r/20250709-sm7635-icc-v3-0-c446203c3b3a@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for the Qualcomm interconnect buses found in Milos based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250709-sm7635-icc-v3-2-c446203c3b3a@fairphone.com
[georgi: remove null termination of nodes and links]
Signed-off-by: Georgi Djakov <djakov@kernel.org>
In the same spirit as e.g. Commit b136d257ee ("interconnect: qcom:
sc8280xp: Drop IP0 interconnects"), drop the resources that should be
taken care of through the clk-rpmh driver.
Fixes: 77d79677b0 ("interconnect: qcom: add QCS615 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250627-topic-qcs615_icc_ipa-v1-2-dc47596cde69@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The 'icc_bw_lock' mutex is introduced in commit af42269c35
("interconnect: Fix locking for runpm vs reclaim") in order to decouple
serialization of bw aggregation from codepaths that require memory
allocation.
However commit d30f83d278 ("interconnect: core: Add dynamic id
allocation support") added a devm_kasprintf() call into a path protected
by the 'icc_bw_lock' which causes the following lockdep warning on
machines like the Lenovo ThinkPad X13s:
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc3 #15 Not tainted
------------------------------------------------------
(udev-worker)/342 is trying to acquire lock:
ffffb973f7ec4638 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_node_track_caller_noprof+0xa0/0x3e0
but task is already holding lock:
ffffb973f7f7f0e8 (icc_bw_lock){+.+.}-{4:4}, at: icc_node_add+0x44/0x154
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (icc_bw_lock){+.+.}-{4:4}:
icc_init+0x48/0x108
do_one_initcall+0x64/0x30c
kernel_init_freeable+0x27c/0x500
kernel_init+0x20/0x1d8
ret_from_fork+0x10/0x20
-> #0 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x136c/0x2114
lock_acquire+0x1c8/0x354
fs_reclaim_acquire+0x74/0xa8
__kmalloc_node_track_caller_noprof+0xa0/0x3e0
devm_kmalloc+0x54/0x124
devm_kvasprintf+0x74/0xd4
devm_kasprintf+0x58/0x80
icc_node_add+0xb4/0x154
qcom_osm_l3_probe+0x20c/0x314 [icc_osm_l3]
platform_probe+0x68/0xd8
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x160
driver_probe_device+0x40/0x110
__driver_attach+0xfc/0x208
bus_for_each_dev+0x74/0xd0
driver_attach+0x24/0x30
bus_add_driver+0x110/0x234
driver_register+0x60/0x128
__platform_driver_register+0x24/0x30
osm_l3_driver_init+0x20/0x1000 [icc_osm_l3]
do_one_initcall+0x64/0x30c
do_init_module+0x58/0x23c
load_module+0x1df8/0x1f70
init_module_from_file+0x88/0xc4
idempotent_init_module+0x188/0x280
__arm64_sys_finit_module+0x6c/0xd8
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x158
el0t_64_sync_handler+0xc8/0xcc
el0t_64_sync+0x198/0x19c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(icc_bw_lock);
lock(fs_reclaim);
lock(icc_bw_lock);
lock(fs_reclaim);
*** DEADLOCK ***
The icc_node_add() functions is not designed to fail, and as such it
should not do any memory allocation. In order to avoid this, add a new
helper function for the name generation to be called by drivers which
are using the new dynamic id feature.
Fixes: d30f83d278 ("interconnect: core: Add dynamic id allocation support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20250625-icc-bw-lockdep-v3-1-2b8f8b8987c4@gmail.com
Co-developed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250627075854.26943-1-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add Epoch Subsystem (EPSS) L3 provider support on SA8775P SoCs.
Current interconnect framework is based on static IDs for creating node
and registering with framework. This becomes a limitation for topologies
where there are multiple instances of same interconnect provider.
Modified interconnect framework APIs to create and link icc node with
dynamic IDs, this will help to overcome the dependency on static IDs.
* icc-sa8775p
dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
interconnect: core: Add dynamic id allocation support
interconnect: qcom: Add multidev EPSS L3 support
interconnect: qcom: icc-rpmh: Add dynamic icc node id support
interconnect: qcom: sa8775p: Add dynamic icc node id support
Link: https://lore.kernel.org/r/20250415095343.32125-1-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The mc_virt & clk_virt nodes are virtual and doesn't have associated registers,
thus the regmap config will fail with:
qnoc-sm8650 interconnect-0: error -EINVAL: invalid resource (null)
Remove the regmap config since QoS will never be applied to those virtual
nodes.
Reported-by: Pengyu Luo <mitltlatltl@gmail.com>
Fixes: 40ef9b6b77 ("interconnect: qcom: sm8650: enable QoS configuration")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250519-topic-sm8650-upstream-icc-qos-fix-v1-1-6ace779250aa@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
To facilitate dynamic id allocation, discard the static IDs
from node data and set alloc_dyn_id in descriptor structure
to indicate dynamic ID allocation. Update the topology to use
node pointers for links instead of static IDs and forward declare
the node pointer to avoid undefined references.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415095343.32125-6-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Interconnect framework relies on static IDs for creating,
linking and maintaning the topology. This dependency on static
IDs prevents creating two instances of same provider. To overcome
the dependency on static IDs, dynamic ID support is being added.
To facilitate dynamic node ID support, the driver now uses
node pointers for links instead of static node IDs and icc_node
pointer is added as member in qcom_icc_node structure to track
the node creation.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415095343.32125-5-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
EPSS on SA8775P has two instances, necessitating the creation of two
device nodes with different compatibles due to the unique ICC node ID
and name limitations in the interconnect framework. Add multidevice
support for the OSM-L3 provider to dynamically obtain unique node IDs
and register with the framework.
EPSS topology includes a single master-slave pair within the same
provider, the node linking logic is simplified by directly connecting
the master node to the slave node.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Link: https://lore.kernel.org/r/20250415095343.32125-4-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This pull request contains the interconnect changes for the 6.14-rc1 merge
window. It contains one new driver and DT documentation updates for L3
and bandwidth monitors.
Driver changes:
- New driver for the SM8750 platform
- Add DT compatibles for QCS615 BWMON and SM8650 OSM
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=eGKk
-----END PGP SIGNATURE-----
Merge tag 'icc-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Pull interconnect changes from Georgi:
interconnect changes for 6.14
This pull request contains the interconnect changes for the 6.14-rc1 merge
window. It contains one new driver and DT documentation updates for L3
and bandwidth monitors.
Driver changes:
- New driver for the SM8750 platform
- Add DT compatibles for QCS615 BWMON and SM8650 OSM
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
interconnect: qcom: Add interconnect provider driver for SM8750
dt-bindings: interconnect: add interconnect bindings for SM8750
The statically allocated 'struct qcom_icc_desc' is not modified by the
driver and like all other instances should be const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250109164630.175093-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The following UBSAN error is reported during boot on the db410c board on
a clang-19 build:
Internal error: UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
...
pc : qnoc_probe+0x5f8/0x5fc
...
The cause of the error is that the counter member was not set before
accessing the annotated flexible array member, but after that. Fix this
by initializing it earlier.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/r/CA+G9fYs+2mBz1y2dAzxkj9-oiBJ2Acm1Sf1h2YQ3VmBqj_VX2g@mail.gmail.com
Fixes: dd4904f3b9 ("interconnect: qcom: Annotate struct icc_onecell_data with __counted_by")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20241203223334.233404-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for the network of connects present on the SAR2130P platform.
* icc-sar2130p
dt-bindings: interconnect: qcom: document SAR2130P NoC
interconnect: qcom: add support for SAR2130P
Link: https://lore.kernel.org/r/20241018-sar2130p-icc-v2-0-c58c73dcd19d@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for the Qualcomm interconnect buses found in QCS8300
based platforms. The topology consists of several NoCs that are
controlled by a remote processor that collects the aggregated
bandwidth for each master-slave pairs.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Link: https://lore.kernel.org/r/20240910101013.3020-3-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/interconnect to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241017154920.136220-2-u.kleine-koenig@baylibre.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for the interconnects as present on the Qualcomm
SAR2130P platform. This is based on the msm-5.10 tree, tag
KERNEL.PLATFORM.1.0.r4-00400-NEO.0.
Co-developed-by: Odelu Kukatla <quic_okukatla@quicinc.com>
Signed-off-by: Odelu Kukatla <quic_okukatla@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241018-sar2130p-icc-v2-2-c58c73dcd19d@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for the Qualcomm interconnect buses found in QCS615
based platforms. The topology consists of several NoCs that are
controlled by a remote processor that collects the aggregated
bandwidth for each master-slave pairs.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Link: https://lore.kernel.org/r/20240924143958.25-3-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
rename qos_clks_required flag to qos_requires_clocks in qcom_icc_desc
structure. This flag indicates that clocks are required for accessing
and programming the QoS registers.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Link: https://lore.kernel.org/r/20240911093516.22347-1-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Return -EPROBE_DEFER from interconnect provider incase probe defer is
received from devm_clk_bulk_get_all(). This would help in reattempting
the inteconnect driver probe, once the required QoS clocks are
available.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Fixes: 0a7be6b35d ("interconnect: qcom: icc-rpmh: Add QoS configuration support")
Link: https://lore.kernel.org/r/20240911094516.16901-1-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
A set of fixes that target stability of the SM8350 platform.
* icc-sm8350
interconnect: qcom: sm8350: drop DISP nodes
dt-bindings: interconnect: qcom,sm8350: drop DISP nodes
interconnect: qcom: sm8250: Enable sync_state
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-0-1149dd8399fe@linaro.org/
Signed-off-by: Georgi Djakov <djakov@kernel.org>
BIMC and SNOC-MM on downstream feature
qcom,util-fact which translates to ab_coeff, add it.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20240709102728.15349-9-a39.skl@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Currently we are lacking descriptions of regmaps, bus clocks
and types of busses, provide them.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20240709102728.15349-7-a39.skl@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for interconnect busses found in MSM8937 based platforms.
The topology consists of four NoCs that are partially controlled by a
RPM processor.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20240709102728.15349-5-a39.skl@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Enable the generic icc sync_state callback to ensure interconnect votes
are actually taken into account, instead of being forced to the maximum
value.
Fixes: b95b668eaa ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-8-1149dd8399fe@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The msm-5.x kernels have additional display RSC and separate display BCM
voter. Since upstream kernel doesn't yet provide display RSC, we end up
duplicating several nodes, which can result in incorrect votes being
cast. Drop *_DISP nodes.
Fixes: d26a566744 ("interconnect: qcom: Add SM8350 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-4-1149dd8399fe@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for interconnect busses found in MSM8976 based platforms.
The topology consists of four NoCs that are partially controlled by a
RPM processor.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20240709102728.15349-3-a39.skl@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This series adds QoS support for QNOC type device which can be found on
SC7280 platform. It adds support for programming priority,
priority forward disable and urgency forwarding. This helps in
priortizing the traffic originating from different interconnect masters
at NOC (Network On Chip).
* icc-rpmh-qos
dt-bindings: interconnect: add clock property to enable QOS on SC7280
interconnect: qcom: icc-rpmh: Add QoS configuration support
interconnect: qcom: sc7280: enable QoS configuration
interconnect: qcom: Fix DT backwards compatibility for QoS
Link: https://lore.kernel.org/r/20240607173927.26321-1-quic_okukatla@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add qos_clks_required flag to skip QoS configuration if clocks property
is not populated in devicetree for providers which require clocks to be
enabled for accessing registers. This is to keep the QoS configuration
backwards compatible with devices that have older DTB.
Reported-by: Bjorn Andersson <andersson@kernel.org>
Closes: https://lore.kernel.org/all/ciji6nlxn752ina4tmh6kwvek52nxpnguomqek6plwvwgvoqef@yrtexkpmn5br/
Signed-off-by: Odelu Kukatla <quic_okukatla@quicinc.com>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Fixes: fbd908bb8b ("interconnect: qcom: sc7280: enable QoS configuration")
Link: https://lore.kernel.org/r/20240704125515.22194-1-quic_okukatla@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for interconnect busses found in MSM8953 based platforms.
The topology consists of four NoCs that are partially controlled by a
RPM processor.
Note that one of NoCs (System NoC) has a counterpart (System NoC MM)
that is modelled as child device to avoid resource conflicts, since it
uses same MMIO space for configuration.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20240628-msm8953-interconnect-v3-2-a70d582182dc@mainlining.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Enable QoS configuration for master ports with predefined values
for priority and urgency forawrding.
Signed-off-by: Odelu Kukatla <quic_okukatla@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240607173927.26321-3-quic_okukatla@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add QoS support for QNOC device for configuring priority,
priority forward disable and urgency forwarding. QoS is required
to prioritize the traffic originating from different interconnect
masters at NoC (Network On Chip).
Signed-off-by: Odelu Kukatla <quic_okukatla@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240607173927.26321-2-quic_okukatla@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/interconnect/qcom/interconnect_qcom.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/interconnect/qcom/icc-rpmh.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240612-md-drivers-interconnect-qcom-v1-1-da0462d6301b@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This pull request contains the interconnect changes for the 6.10-rc1 merge
window. It contains some small driver changes listed below:
Driver changes:
- Cleanup sm6115 QoS port numbering.
- Fix incorrect port value in qcm2290 driver.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UapV
-----END PGP SIGNATURE-----
Merge tag 'icc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.10
This pull request contains the interconnect changes for the 6.10-rc1 merge
window. It contains some small driver changes listed below:
Driver changes:
- Cleanup sm6115 QoS port numbering.
- Fix incorrect port value in qcm2290 driver.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: qcm2290: Fix mas_snoc_bimc QoS port assignment
interconnect: qcom: sm6115: Unspaghettify SNoC QoS port numbering
When I was creating this driver, my bright mind overlooked the existence
of desc->qos_offset and decided to make up for the difference it made by
adding 21 (0x15) to the port index on SNoC and its downstream buses.
Undo this mistake to make the indices actually mean something.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240326-topic-rpm_icc_qos_cleanup-v1-1-357e736792be@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Here are fixes for two reported issues. One of them is a fix for
a driver that tries to access a non-existent resource which prints
a warning message during boot. The other one is fixing a race
condition in the core framework where one struct member has been
left unprotected by mutex.
- interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
- interconnect: Don't access req_list while it's being manipulated
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=FkyX
-----END PGP SIGNATURE-----
Merge tag 'icc-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-work-linus
Georgi writes:
interconnect fixes for v6.9-rc
Here are fixes for two reported issues. One of them is a fix for
a driver that tries to access a non-existent resource which prints
a warning message during boot. The other one is fixing a race
condition in the core framework where one struct member has been
left unprotected by mutex.
- interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
- interconnect: Don't access req_list while it's being manipulated
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Don't access req_list while it's being manipulated
interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
