We've now completely stopped using drm_i915_gem_object in display code
that gets built for xe. Kill off the -Ddrm_i915_gem_object=xe_bo
hack. Good riddance.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0eae2b62b635acafe5dc97dc4b205aaa34ce1e53.1726589119.git.jani.nikula@intel.com
The display code needs to deal with gem objects, and mostly uses struct
drm_i915_gem_object. That's not great, because for xe we need to
redefine it struct xe_bo during build.
Start a common interface using struct drm_gem_object, with separate
implementations for i915 and xe. For starters, convert i9xx_wm.c to use
it.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/df6867523a0b5fdd4eb63f657f545603ae6f6e0b.1726589119.git.jani.nikula@intel.com
To successfully migrate a VM with attached GPU VF we also need to
migrate VF's GuC state. Add necessary functions that interacts with
GuC to save and restore a VF GuC state. We will start using them in
upcoming patches.
Since VF migration requires many more changes in the driver, enable
those functions only under debug config.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913120013.1924-1-michal.wajdeczko@intel.com
This is useful for debug, in case something goes wrong with the GSC. The
info includes the version information and the current value of the HECI1
status registers.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-5-daniele.ceraolospurio@intel.com
A xe_hw_engine_group is a group of hw engines. Two hw engines belong to
the same xe_hw_engine_group if one hw engine cannot make progress while
the other is stuck on a page fault.
Typically, hw engines of the same group share some resources such as EUs,
but this really depends on the hardware configuration of the platforms.
The simple engines partitioning proposed here might be too conservative
but is intended to work for existing platforms. It can be optimized later
if more sets of independent engines are identified.
The hw engine groups are intended to be used in the context of faulting
long-running jobs submissions.
v2: Move to own files, improve error handling (Matt Brost)
v3: Fix build issue reported by CI, improve commit message (Matt Roper)
v4: Fix kernel doc
v5: Add switch case for XE_ENGINE_CLASS_OTHER
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-2-francois.dugast@intel.com
Add skeleton APIs for recording and printing various stats over
debugfs. This currently only added counter types stats which is backed
by atomic_t and wrapped with CONFIG_DRM_XE_STATS so this can be disabled
on production system.
v4: Rebase and other minor fixes (Matt)
v3: s/CONFIG_DRM_XE_STATS/CONFIG_DEBUG_FS(Lucas)
v2: add missing docs
Add boundary checks for stats id and other improvements (Michal)
Fix build when CONFIG_DRM_XE_STATS is disabled(Matt)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sai Gowtham Ch <sai.gowtham.ch@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240810191522.18616-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Use a dummy xe_debugfs_register() if debugfs is not enabled and move all
debugfs-related files under `ifeq ($(CONFIG_DEBUG_FS),y)` in the
Makefile. This is similar to what was done for display in
commit 439987f6f4 ("drm/xe: don't build debugfs files when
CONFIG_DEBUG_FS=n").
This removes the following warning while loading xe with
CONFIG_DEUBG_FS=n:
xe 0000:03:00.0: [drm] Create GT directory failed
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808171121.2484237-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Instead of keep adding more dependencies as WAs are needed in different
places of the driver, just add a rule with all the objects so the code
generation happens before anything else.
While at it, group lines related to wa_oob in the Makefile.
v2: Prefix $(obj) when declaring dependency
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708213041.1734028-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
On BMG-G21 we need to disable fbc due to complications around the WA.
v2:
- Try to handle with i915_drv.h and compat layer. (Rodrigo)
v3:
- For simplicity retreat back to the original design for now.
- Drop the extra \ from the Makefile (Jani)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703124338.208220-4-matthew.auld@intel.com
This involves enabling l2 caching of host side memory access to VRAM
through the CPU BAR. The main fallout here is with display since VRAM
writes from CPU can now be cached in GPU l2, and display is never
coherent with caches, so needs various manual flushing. In the case of
fbc we disable it due to complications in getting this to work
correctly (in a later patch).
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703124338.208220-3-matthew.auld@intel.com
In Xe, the perf layer allows capture of HW counter streams. These HW
counters are generally performance related but don't have to be necessarily
so. Also, the name "perf" is a carryover from i915 and is not preferred.
Here we propose the name "observation" for this common layer which allows
capture of different types of these counter streams.
v2: Rename observability layer to observation layer (Lucas/Rodrigo)
v3: Rename sysctl file to "observation_paranoid" (Jose)
Fixes: 52c2e956dc ("drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types")
Fixes: fe8929bdf8 ("drm/xe/perf/uapi: Add perf_stream_paranoid sysctl")
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703164801.2561423-1-ashutosh.dixit@intel.com
This WA requires us to limit media GT frequency requests to a certain
cap value during driver load. Freq limits are restored after load
completes, so perf will not be affected during normal operations.
During normal driver operation, this WA requires dummy writes to media
offset 0x380D8C after every ~63 GGTT writes. This will ensure completion
of the LMEM writes originating from Gunit.
During driver unload(before FLR), the WA requires that we set requested
frequency to the cap value again.
v3: Do not use WA number in function name. Call WA wrapper from xe_device.
Rename some variables, check for locks in the correct function (Rodrigo).
Ensure reset path is also covered for this WA.
v4: Fix BAT failure
v5: Add a function pointer for ggtt_ops (Michal W)
v6: Fix name collision and use static function (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-2-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Need to sync some header include that propagated through
drm-intel-next.
v2: After some changes in drm/drm-next
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add and initialize supported OA data formats for various platforms
(including Xe2). User can request OA data in any supported format.
Bspec: 52198, 60942, 61101
v2: Start 'xe_oa_format_name' enum from 0 (Umesh)
Fix error rewind with OA (Umesh)
v3: Use graphics versions rather than absolute platform names
v4: Add missing kernel doc for struct memebers and enum and other minor
changes (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-4-ashutosh.dixit@intel.com
In Xe, the plan is to support multiple types of perf counter streams (OA is
only one type of these streams). Rather than introduce NxM ioctls for
these (N perf streams with M ioctl's per perf stream), we decide to
multiplex these (N different stream types and the M ops for each of these
stream types) through a single PERF ioctl. This multiplexing is the purpose
of the PERF layer.
In addition to PERF DRM ioctl's, another set of ioctl's on the PERF fd are
defined. These are expected to be common to different PERF stream types and
therefore defined at the PERF layer itself.
v2: Add param_size to 'struct drm_xe_perf_param' (Umesh)
v3: Rename 'enum drm_xe_perf_ops' to
'enum drm_xe_perf_ioctls' (Guy Zadicario)
Add DRM_ prefix to ioctl names to indicate uapi names
v4: Add 'enum drm_xe_perf_op' previously missed out (Guy Zadicario)
v5: Squash the ops and PERF layer patches into a single patch (Umesh)
Remove param_size from struct 'drm_xe_perf_param' (Umesh)
v6: Add DRM_XE_PERF_IOCTL_STATUS
v7: Add DRM_XE_PERF_IOCTL_INFO
v8: Fix Copyright years, fix DRM_XE_PERF_TYPE_MAX, move '#include
"xe_perf.h"' to xe_perf.c, add kernel doc (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Guy Zadicario <gzadicario@habana.ai>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-2-ashutosh.dixit@intel.com
Recheck the link state after a passing link training, with a 2 sec delay
to account for cases where the link goes bad following the link training
and the sink doesn't report this via an HPD IRQ.
The delayed work added here will be also used by a later patch after a
failed link training to try to retrain the link with unchanged link
params before reducing the link params.
v2: Don't flush an uninitialized delayed work (on HDMI-only DDI ports).
v3:
- Move the helpers to a new intel_encoder.c file, rename them
accordingly. (Ville)
- Add the work to intel_encoder instead of intel_digital_port.
- Call the encoder specific link check function via an encoder hook.
- Flush the link check work during encoder destroy from
intel_dp_encoder_flush_work().
- Flush the link check work during encoder suspend as well.
v4: Call intel_encoder_link_check_init() with a valid encoder pointer.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610181428.2955658-1-imre.deak@intel.com
xe_trace.h is starting to get over crowded. Move the traces
related to guc to its own file.
v2: Update year in License(Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607182943.3572524-3-radhakrishna.sripada@intel.com
xe_trace.h is starting to get over crowded. Move the traces
related to bo, vm, vma's to its own file.
v2: Update year in License(Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607182943.3572524-2-radhakrishna.sripada@intel.com
- Expose the L3 bank mask (Francois)
Cross-subsystem Changes:
- Update Xe driver maintainers (Oded)
Display (i915):
- Add missing include to intel_vga.c (Michal Wajdeczko)
Driver Changes:
- Fix Display (xe-only) detection for ADL-N (Lucas)
- Runtime PM fixes that enabled PC-10 and D3Cold (Francois, Rodrigo)
- Fix unexpected silent drm backmerge issues (Thomas)
- More (a lot more) preparation for SR-IOV support (Michal Wajdeczko)
- Devcoredump fixes and improvements (Jose, Tejas, Matt Brost)
- Introduce device 'wedged' state (Rodrigo)
- Improve debug and info messages (Michal Wajdeczko, Rodrigo, Nirmoy)
- Adding or fixing workarounds (Tejas, Shekhar, Lucas, Bommu)
- Check result of drmm_mutex_init (Michal Wajdeczko)
- Enlarge the critical dma fence area for preempt fences (Matt Auld)
- Prevent UAF in VM's rebind work (Matt Auld)
- GuC submit related clean-ups and fixes (Matt Brost, Himal, Jonathan, Niranjana)
- Prefer local helpers to perform dma reservation locking (Himal)
- Spelling and typo fixes (Colin, Francois)
- Prep patches for 1 job per VM bind IOCTL (no uapi change yet) (Matt Brost)
- Remove uninitialized end var from xe_gt_tlb_invalidation_range (Nirmoy)
- GSC related changes targeting LNL support (Daniele)
- Fix assert in L3 bank mask generation (Francois)
- Perform dma_map when moving system buffer objects to TT (Thomas)
- Add helpers for manipulating macro arguments (Michal Wajdeczko)
- Refactor default device atomic settings (Nirmoy)
- Add debugfs node to dump mocs (Janga)
- Use ordered WQ for G2H handler (Matt Brost)
- Clean up and fixes in header includes (Michal Wajdeczko)
- Prefer flexible-array over deprecated zero-lenght ones (Lucas)
- Add Indirect Ring State support (Niranjana)
- Fix UBSAN shift-out-of-bounds failure (Shuicheng)
- HWMon fixes and additions (Karthik)
- Clean-up refactor around probe init functions (Lucas, Michal Wajdeczko)
- Fix PCODE init function (Himal)
- Only use reserved BCS instances for usm migrate exec queue (Matt Brost)
- Only zap PTEs as needed (Matt Brost)
- Per client usage info (Lucas)
- Core hotunplug improvements converting stuff towards devm (Matt Auld)
- Don't emit false error if running in execlist mode (Michal Wajdeczko)
- Remove unused struct (Dr. David)
- Support/debug for slow GuC loads (John Harrison)
- Decouple job seqno and lrc seqno (Matt Brost)
- Allow migrate vm gpu submissions from reclaim context (Thomas)
- Rename drm-client running time to run_ticks and fix a UAF (Umesh)
- Check empty pinned BO list with lock held (Nirmoy)
- Drop undesired prefix from the platform name (Michal Wajdeczko)
- Remove unwanted mutex locking on xe file close (Niranjana)
- Replace format-less snprintf() with strscpy() (Arnd)
- Other general clean-ups on registers definitions and function names (Michal Wajdeczko)
- Add kernel-doc to some xe_lrc interfaces (Niranajana)
- Use missing lock in relay_needs_worker (Nirmoy)
- Drop redundant W=1 warnings from Makefile (Jani)
- Simplify if condition in preempt fences code (Thorsten)
- Flush engine buffers before signalling user fence on all engines (Andrzej)
- Don't overmap identity VRAM mapping (Matt Brost)
- Do not dereference NULL job->fence in trace points (Matt Brost)
- Add synchronous gt reset debugfs (Jonathan)
- Xe gt_idle fixes (Riana)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmZiLKoACgkQ+mJfZA7r
E8rbgwf9FcPeq0jLTfdv4TDj6n54P1jpyqiQJq6a59TXUAhKIBpPfh1KLztIaZPh
EzUS4vMz8qXZaNIxgrmD8oN6+BIhGiAxU5Qd1TK4trSFLyKjieQVaX6TQBPxWmNF
+jlhh1UAsVVcuhs1hDGLLMeWPkKhxI5mhVr7py5IJBYlv+8tYo1/KlkpeKuuGJpS
Re+DYVKS749QEOnxCsu1yFacKb56NqjzlEEa+S08a6f5AcWoZpMVV/NF9VDtZ4LK
genZAjGXbv0cfBR4EDtyS84KqiCOSeVcYGc2JgQQHo5qhUsY0UBariyEMe89c+LR
Pk02k5b4/UgbUUX/vnEPHE/auqUJHg==
=crL/
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-06-06' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose the L3 bank mask (Francois)
Cross-subsystem Changes:
- Update Xe driver maintainers (Oded)
Display (i915):
- Add missing include to intel_vga.c (Michal Wajdeczko)
Driver Changes:
- Fix Display (xe-only) detection for ADL-N (Lucas)
- Runtime PM fixes that enabled PC-10 and D3Cold (Francois, Rodrigo)
- Fix unexpected silent drm backmerge issues (Thomas)
- More (a lot more) preparation for SR-IOV support (Michal Wajdeczko)
- Devcoredump fixes and improvements (Jose, Tejas, Matt Brost)
- Introduce device 'wedged' state (Rodrigo)
- Improve debug and info messages (Michal Wajdeczko, Rodrigo, Nirmoy)
- Adding or fixing workarounds (Tejas, Shekhar, Lucas, Bommu)
- Check result of drmm_mutex_init (Michal Wajdeczko)
- Enlarge the critical dma fence area for preempt fences (Matt Auld)
- Prevent UAF in VM's rebind work (Matt Auld)
- GuC submit related clean-ups and fixes (Matt Brost, Himal, Jonathan, Niranjana)
- Prefer local helpers to perform dma reservation locking (Himal)
- Spelling and typo fixes (Colin, Francois)
- Prep patches for 1 job per VM bind IOCTL (no uapi change yet) (Matt Brost)
- Remove uninitialized end var from xe_gt_tlb_invalidation_range (Nirmoy)
- GSC related changes targeting LNL support (Daniele)
- Fix assert in L3 bank mask generation (Francois)
- Perform dma_map when moving system buffer objects to TT (Thomas)
- Add helpers for manipulating macro arguments (Michal Wajdeczko)
- Refactor default device atomic settings (Nirmoy)
- Add debugfs node to dump mocs (Janga)
- Use ordered WQ for G2H handler (Matt Brost)
- Clean up and fixes in header includes (Michal Wajdeczko)
- Prefer flexible-array over deprecated zero-lenght ones (Lucas)
- Add Indirect Ring State support (Niranjana)
- Fix UBSAN shift-out-of-bounds failure (Shuicheng)
- HWMon fixes and additions (Karthik)
- Clean-up refactor around probe init functions (Lucas, Michal Wajdeczko)
- Fix PCODE init function (Himal)
- Only use reserved BCS instances for usm migrate exec queue (Matt Brost)
- Only zap PTEs as needed (Matt Brost)
- Per client usage info (Lucas)
- Core hotunplug improvements converting stuff towards devm (Matt Auld)
- Don't emit false error if running in execlist mode (Michal Wajdeczko)
- Remove unused struct (Dr. David)
- Support/debug for slow GuC loads (John Harrison)
- Decouple job seqno and lrc seqno (Matt Brost)
- Allow migrate vm gpu submissions from reclaim context (Thomas)
- Rename drm-client running time to run_ticks and fix a UAF (Umesh)
- Check empty pinned BO list with lock held (Nirmoy)
- Drop undesired prefix from the platform name (Michal Wajdeczko)
- Remove unwanted mutex locking on xe file close (Niranjana)
- Replace format-less snprintf() with strscpy() (Arnd)
- Other general clean-ups on registers definitions and function names (Michal Wajdeczko)
- Add kernel-doc to some xe_lrc interfaces (Niranajana)
- Use missing lock in relay_needs_worker (Nirmoy)
- Drop redundant W=1 warnings from Makefile (Jani)
- Simplify if condition in preempt fences code (Thorsten)
- Flush engine buffers before signalling user fence on all engines (Andrzej)
- Don't overmap identity VRAM mapping (Matt Brost)
- Do not dereference NULL job->fence in trace points (Matt Brost)
- Add synchronous gt reset debugfs (Jonathan)
- Xe gt_idle fixes (Riana)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZmItmuf7vq_xvRjJ@intel.com
There is no point in mixing register access and VRAM code in the
same file. Move and rename the VRAM probe function to a new file
(there are no other changes other then new simple kernel-doc).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530133527.1328-5-michal.wajdeczko@intel.com
Other driver code beyond the sysfs interface wants to know about
throttling. So make the query function globally accessible.
v2: Revert include order change (review feedback from Lucas)
v3: Remove '_sysfs' from throttle file names and keep limit query in
the same file rather than moving elsewhere (review feedback from
Rodrigo).
v4: Correct #include while renaming header file (review feedback
from Lucas).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240518043700.3264362-2-John.C.Harrison@Intel.com
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
For debug purposes we might want to view actual VF configuration
(including GGTT range, LMEM size, number of GuC contexts IDs or
doorbells) and the negotiated ABI versions (with GuC and PF).
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-7-michal.wajdeczko@intel.com
The VF driver doesn't know which GuC firmware was loaded by the PF
driver and must perform GuC ABI version handshake prior to sending
any other H2G actions to the GuC to submit workloads.
The VF driver also doesn't have access to the fuse registers and
must rely on the runtime info, which includes values of the fuse
registers, that the PF driver is exposing to the VFs.
Add functions to cover that functionality. We will use these
functions in upcoming patches.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-5-michal.wajdeczko@intel.com
When thresholds used to monitor VFs activities are configured,
then GuC may send GUC2PF_ADVERSE_EVENT messages informing the
PF driver about exceeded thresholds. Start handling such messages.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514190015.2172-8-michal.wajdeczko@intel.com
The PCI subsystem already exposes the "sriov_numvfs" attribute
that users can use to enable or disable SR-IOV VFs. Add custom
implementation of the .sriov_configure callback defined by the
pci_driver to perform additional steps, including fair VFs
provisioning with the resources, as required by our platforms.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> #v2
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506184121.2615-1-michal.wajdeczko@intel.com
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Perform manual transient cache flush prior to flip and at the end of
frontbuffer_flush. This is needed to ensure display engine doesn't see
garbage if the surface is L3:XD dirty.
Testcase: igt@xe-pat@display-vs-wb-transient
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-19-radhakrishna.sripada@intel.com
We already have functions to configure VF resources and to print
actual provisioning details. Expose this functionality in debugfs
to allow experiment with different settings or inspect details in
case of unexpected issues with the provisioning.
As debugfs attributes are per-VF, we use parent d_inode->i_private
to store VFID, similarly how we did for per-GT attributes.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423131244.2045-2-michal.wajdeczko@intel.com
We already have mechanism that allows a VF driver to communicate
with the PF driver, now add PF side handlers for VF2PF requests
defined in version 1.0 of VF/PF GuC Relay ABI specification.
The VF2PF_HANDSHAKE request must be used by the VF driver to
negotiate the ABI version prior to sending any other request.
We will reset any negotiated version later during FLR.
The outcome of the VF2PF_QUERY_RUNTIME requests depends on actual
platform, for legacy platforms used as SDV is provided as-is, for
latest platforms it is preliminary, and might be changed.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423180436.2089-5-michal.wajdeczko@intel.com
- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
=HouD
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-04-23' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
# v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
# vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
# =HouD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 22:42:29 AEST
# gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key
# Conflicts:
# drivers/gpu/drm/xe/xe_device_types.h
# drivers/gpu/drm/xe/xe_vm.c
# drivers/gpu/drm/xe/xe_vm_types.h
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zievlb1wvqDg1ovi@fedora
In order to reduce the DC5->DC2 restore time, wakelocks have been
introduced in DMC so the driver can tell it when registers and other
memory areas are going to be accessed and keep their respective blocks
awake.
Implement this in the driver by adding the concept of DMC wakelocks.
When the driver needs to access memory which lies inside pre-defined
ranges, it will tell DMC to set the wakelock, access the memory, then
wait for a while and clear the wakelock.
The wakelock state is protected in the driver with spinlocks to
prevent concurrency issues.
BSpec: 71583
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-2-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
To run correctly, each Virtual Function must be provisioned with
some chunk of shared hardware or firmware resources (like GGTT,
device memory, GuC doorbell IDs, GuC context IDs) and scheduling
parameters (execution quantum or preemption timeout).
All resources assigned to VFs must be excluded from the PF driver
use and may require some additional preparation steps (like setup
of the LMTT or update of the GGTT PTE). Those provisioning details
must be then sent to the GuC firmware as most of those details
will be shared later with the VF drivers during their boot.
Add basic functions to provision VFs with all hardware resources
or scheduling parameters. We will use them shortly in upcoming
patches either in manual provisioning over debugfs, exposed to the
advanced users, or automatic provisioning done by PF driver during
VFs enabling.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-7-michal.wajdeczko@intel.com
The PF driver must maintain additional GT level data per each VF.
This additional per-VF data will be added in upcoming patches and
will include: provisioning configuration (like GGTT space or LMEM
allocation sizes or scheduling parameters), monitoring thresholds
and counters, and more.
As number of supported VFs varies across platforms use flexible
array where first entry will contain metadata for the PF itself
(if such configuration parameter is applicable for the PF) and
all remaining entries will contain data for potential VFs.
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-6-michal.wajdeczko@intel.com
There are few knobs inside GuC firmware to control VFs scheduling.
Add basic functions to support their reconfigurations.
We will start using them shortly once we prepare debugfs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-6-michal.wajdeczko@intel.com
Many of the GuC actions use KLVs to pass additional parameters or
configuration data. Add few helper functions for better reporting
any information related to KLVs.
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-5-michal.wajdeczko@intel.com
Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd04.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Introduce a helper function xe_userptr_populate_range to populate
a userptr range. This functions calls hmm_range_fault to read
CPU page tables and populate all pfns/pages of this virtual address
range. For system memory page, dma-mapping is performed
to get a dma-address which can be used later for GPU to access pages.
v1: Address review comments:
separate a npage_in_range function (Matt)
reparameterize function xe_userptr_populate_range function (Matt)
move mmu_interval_read_begin() call into while loop (Thomas)
s/mark_range_accessed/xe_mark_range_accessed (Thomas)
use set_page_dirty_lock (vs set_page_dirty) (Thomas)
move a few checking in xe_vma_userptr_pin_pages to hmm.c (Matt)
v2: Remove device private page support. Only support system
pages for now. use dma-map-sg rather than dma-map-page (Matt/Thomas)
v3: Address review comments:
Squash patch "drm/xe: Introduce a helper to free sg table" to current
patch (Matt)
start and end addresses are already page aligned (Matt)
Do mmap_read_lock and mmap_read_unlock for hmm_range_fault incase of
non system allocator call. (Matt)
Drop kthread_use_mm and kthread_unuse_mm. (Matt)
No need of kernel-doc for static functions.(Matt)
Modify function names. (Matt)
Free sgtable incase of dma_map_sgtable failure.(Matt)
Modify loop for hmm_range_fault.(Matt)
v4: Remove the dummy function for xe_hmm_userptr_populate_range
since CONFIG_HMM_MIRROR is needed. (Matt)
Change variable names start/end to userptr_start/userptr_end.(Matt)
v5: Remove device private page support info from commit message. Since
the patch doesn't support device page handling. (Thomas)
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Co-developed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Brian Welty <brian.welty@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412095237.1048599-2-himal.prasad.ghimiray@intel.com
A recent change added a use of xe_wa_oob.h without adding the file that
uses it to uses_generated_oob, which means xe_wa_oob.h does not get
properly generated before attempting to build the object file:
LINK resolve_btfids
CC [M] drivers/gpu/drm/xe/xe_guc_ads.o
drivers/gpu/drm/xe/xe_guc_ads.c:10:10: fatal error: generated/xe_wa_oob.h: No such file or directory
10 | #include <generated/xe_wa_oob.h>
| ^~~~~~~~~~~~~~~~~~~~~~~
After adding '$(obj)/xe_guc_ads.o' to uses_generated_oob, xe_wa_oob.h is
always generated before building the file, resulting in no errors:
LINK resolve_btfids
HOSTCC drivers/gpu/drm/xe/xe_gen_wa_oob
GEN xe_wa_oob.c xe_wa_oob.h
CC [M] drivers/gpu/drm/xe/xe_guc_ads.o
Fixes: c151ff5c90 ("drm/xe/lnl: Enable GuC Wa_14019882105")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410-drm-xe-fix-xe_guc_ads-using-xe_wa_oob-v1-1-441f2d8e5d83@kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
SR-IOV PF mode detection is based on PCI capability as reported by
the PCI dev_is_pf() function and additionally on 'max_vfs' module
parameter which could be also used to disable PF capability even
if SR-IOV PF capability is reported by the hardware.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404154431.583-3-michal.wajdeczko@intel.com
Use localized __diag_push(), __diag_ignore_all() with rationale, and
__diag_pop() for specific initializations instead of blanket disabling
of -Woverride-init across several files.
Note that we've tried this before with commit 88e9664434 ("drm/i915:
use localized __diag_ignore_all() instead of per file") and reverted in
commit 290d161045 ("Revert "drm/i915: use localized
__diag_ignore_all() instead of per file""). The issue turned out to be
in __diag_ignore_all() and it was fixed by commit 689b097a06
("compiler-gcc: Suppress -Wmissing-prototypes warning for all supported
GCC"). So we should be able to pull this off now.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328102455.944131-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
GuC will use VF_STATE_NOTIFY events to notify the PF about changes
of the VF state, in particular when a VF FLR was requested. Add
very minimal support for such events to avoid reporting errors due
to unexpected G2H. We will improve handling of these messages later.
While around also add few basic functions to control the VF state
(pause, resume, stop) as we will also exercise them soon.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326191518.363-3-michal.wajdeczko@intel.com
While we are already managing GuC IDs directly in GuC submission
code, using bitmap() for MLRC and ida() for SLRC, this code can't
be easily extended to meet additional requirements for SR-IOV use
cases, like limited number of IDs available on VFs, or ID range
reservation for provisioning VFs by the PF.
Add a separate component for managing GuC IDs, that will replace
existing ID management. Start with bitmap() based implementation
that could be optimized later based on perf data.
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313221112.1089-3-michal.wajdeczko@intel.com
Enable HDCP for Xe by defining functions which take care of
interaction of HDCP as a client with the GSC CS interface.
Add intel_hdcp_gsc_message to Makefile and add corresponding
changes to xe_hdcp_gsc.c to make it build.
--v2
-add kfree at appropriate place [Daniele]
-remove useless define [Daniele]
-move host session logic to xe_gsc_submit.c [Daniele]
-call xe_gsc_check_and_update_pending directly in an if condition
[Daniele]
-use xe_device instead of drm_i915_private [Daniele]
--v3
-use xe prefix for newly exposed function [Daniele]
-remove client specific defines from intel_gsc_mtl_header [Daniele]
-add missing kfree() [Daniele]
-have NULL check for hdcp_message in finish function [Daniele]
-dont have too many variable declarations in the same line [Daniele]
--v4
-don't point the hdcp_message structure in xe_device to anything
until it properly gets initialized [Daniele]
--v5
-Squash commits for buildability
--v6
-Order includes alphabetically [Lucas]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306024247.1857881-6-suraj.kandpal@intel.com
Since 'grouped target' is used only in 'make' 4.3, it should
be avoided. Replace it with 'multi-target pattern rule' which
has the same behavior.
Fixes: 9616e74b79 ("drm/xe: Add support for OOB workarounds")
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240302153927.2602241-1-dhirschfeld@habana.ai
[ reword commit message ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 5224ed586b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
When the driver is built-in but the tests are in loadable modules,
the helpers don't actually get put into the driver:
ERROR: modpost: "xe_kunit_helper_alloc_xe_device" [drivers/gpu/drm/xe/tests/xe_test.ko] undefined!
Change the Makefile to ensure they are always part of the driver
even when the rest of the kunit tests are in loadable modules.
Fixes: 5095d13d75 ("drm/xe/kunit: Define helper functions to allocate fake xe device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226124736.1272949-1-arnd@kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 0e6fec6da2)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Since 'grouped target' is used only in 'make' 4.3, it should
be avoided. Replace it with 'multi-target pattern rule' which
has the same behavior.
Fixes: 9616e74b79 ("drm/xe: Add support for OOB workarounds")
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240302153927.2602241-1-dhirschfeld@habana.ai
[ reword commit message ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
When the driver is built-in but the tests are in loadable modules,
the helpers don't actually get put into the driver:
ERROR: modpost: "xe_kunit_helper_alloc_xe_device" [drivers/gpu/drm/xe/tests/xe_test.ko] undefined!
Change the Makefile to ensure they are always part of the driver
even when the rest of the kunit tests are in loadable modules.
Fixes: 5095d13d75 ("drm/xe/kunit: Define helper functions to allocate fake xe device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226124736.1272949-1-arnd@kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There are very few places that need to include anything from under
display/. Require the display/ prefix in #include directives, and drop
the subdirectory from the header search path.
Sort the include lists while at it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122101428.2683468-2-jani.nikula@intel.com
All the other display related files are under display/ subdirectory,
also move xe_display.[ch] there.
Sort the build list while at it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122101428.2683468-1-jani.nikula@intel.com
The GSC uC needs to communicate with the CSME to perform certain
operations. Since the GSC can't perform this communication directly on
platforms where it is integrated in GT, the graphics driver needs to
transfer the messages from GSC to CSME and back. The proxy flow must be
manually started after the GSC is loaded to signal to GSC that we're
ready to handle its messages and allow it to query its init data from
CSME.
Note that the component must be removed before the pci_remove call
completes, so we can't use a drmm helper for it and we need to instead
perform the cleanup as part of the removal flow.
v2: add function documentation, more targeted memory clear, clearer logs
and variable names (Alan)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117182621.2653049-2-daniele.ceraolospurio@intel.com
Building drivers/gpu/drm/xe/xe_gt_pagefault.c with GCC 11 results
in the following build errors:
./include/linux/fortify-string.h:57:33: error: writing 16 bytes into a region of size 0 [-Werror=stringop-overflow=]
57 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:644:9: note: in expansion of macro ‘__underlying_memcpy’
644 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
./include/linux/fortify-string.h:689:26: note: in expansion of macro ‘__fortify_memcpy_chk’
689 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/xe/xe_gt_pagefault.c:340:17: note: in expansion of macro ‘memcpy’
340 | memcpy(pf_queue->data + pf_queue->tail, msg, len * sizeof(u32));
| ^~~~~~
In file included from drivers/gpu/drm/xe/xe_device_types.h:17,
from drivers/gpu/drm/xe/xe_vm_types.h:16,
from drivers/gpu/drm/xe/xe_bo.h:13,
from drivers/gpu/drm/xe/xe_gt_pagefault.c:16:
drivers/gpu/drm/xe/xe_gt_types.h:102:25: note: at offset [1144, 265324] into destination object ‘tile’ of size 8
102 | struct xe_tile *tile;
| ^~~~
Fix these by removing -Wstringop-overflow from drm/xe builds.
Closes: https://lore.kernel.org/all/45ad1d0f-a10f-483e-848a-76a30252edbe@paulmck-laptop/
Fixes: 7a8bc11782 ("drm/xe: Enable W=1 warnings by default")
Suggested-by: Stephen Rothwell <sfr@rothwell.id.au>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ This particular warning is broken on GCC11. In future changes it will
be moved to the normal C flags in the top level Makefile (out of
Makefile.extrawarn), but accounting for the compiler support. Just
remove it out of xe's forced extra warnings for now ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add vram frequency sysfs attributes under the below hierarchy;
/device/tile#/memory/freq0
|-max_freq
|-min_freq
v2: Drop "vram" from attribute names (Rodrigo)
v3: Add documentation for new sysfs (Riana)
Drop prefix from XEHP_PCODE_FREQUENCY_CONFIG (Riana)
v4: Create sysfs under tile#/freq0 after removal of
physical_memsize attrbute
v5: Revert back to creating sysfs under tile#/memory/freq0
Remove definition of GT_FREQUENCY_MULTIPLIER (Rodrigo)
v6: Rename attributes to max/min_freq (Anshuman)
Fix review comments (Rodrigo)
v7: Make documentation more verbose
Move sysfs to separate file (Anshuman)
v8: Fix platform specific conditions and add kernel doc (Anshuman)
Fix typos and remove redundant headers (Riana)
v9: Fix typo (Riana)
Change function name to include "sysfs" (Lucas)
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://lore.kernel.org/r/20240109110418.2065101-1-sujaritha.sundaresan@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are scenarios where SR-IOV Virtual Function (VF) driver will
need to get additional data that is not available over VF MMIO BAR
nor could be queried from the GuC firmware and must be obtained
from the Physical Function (PF) driver.
To allow such communication between VF and PF drivers, GuC supports
set of H2G and G2H actions which allows relaying embedded messages,
that are otherwise opaque for the GuC.
To allow use of this communication mechanism, provide functions for
sending requests and handling replies and placeholder where we will
put handlers for incoming requests.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-8-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
There will be more KUnit tests added that will require fake device.
Define generic helper functions to avoid code duplications.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231218190629.502-6-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
The GFX doorbell solution provides a mechanism for submission of
workload to the graphics hardware by a ring3 application without
the penalty of ring transition for each workload submission.
This feature is not currently used by the Linux drivers, but in
SR-IOV mode the doorbells are treated as shared resource and the
PF driver must be able to provision exclusive range of doorbells
IDs across all enabled VFs.
Introduce simple GuC doorbell ID manager that will be used by the
PF driver for VFs provisioning and can later be used by submission
code once we are ready to switch from H2G based notifications to
doorbells mechanism.
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20231218190629.502-4-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
The register based interrupts infrastructure does not scale
efficiently to allow delivering interrupts to a large number
of virtual machines. Memory based interrupt reporting provides
an efficient and scalable infrastructure.
Define handler to read and dispatch memory based interrupts.
We will use this handler in upcoming patch.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231214185955.1791-8-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
PMU uapi is likely to change in the future. Till the uapi is finalized,
remove PMU from Xe. PMU can be re-added after uapi is finalized.
v2: Include xe_drm.h in xe/tests/xe_dma_buf.c (Francois)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Like done in commit 2250c7ead8 ("drm/i915: enable W=1 warnings by default")
for i915, enable W=1 warnings by default in xe.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Goals of this new xe_gt_freq component:
1. Detach sysfs controls and raw freq management from GuC SLPC.
2. Create a directory that could later be aligned with devfreq.
3. Encapsulate all the freq control in a single directory. Although
we only have one freq domain per GT, already start with a numbered
freq0 directory so it could be expanded in the future if multiple
domains or PLL are needed.
Note: Although in the goal #1, the raw freq management control is
mentioned, this patch only starts by the sysfs control. The RP freq
configuration and init freq selection are still under the guc_pc, but
should be moved to this component in a follow-up patch.
v2: - Add /tile# to the doc and remove unnecessary kobject_put (Riana)
- s/ssize_t/int on some ret variables (Vinay)
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The Local Memory Translation Table (LMTT) provides additional
abstraction for Virtual Functions (VF) accessing device VRAM.
This code is based on prior work of Michal Winiarski.
In this patch we focus only on LMTT initialization. Remaining LMTT
functions will be used once we add a VF provisioning to the PF.
Bspec: 44117, 52404, 59314
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20231128151507.1015-4-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Disable dynamic HW load balancing of compute resource assignment
to engines and instead enabled fixed mode of mapping compute
resources to engines on all platforms with more than one compute
engine.
By default enable only one CCS engine with all compute slices
assigned to it. This is the desired configuration for common
workloads.
PVC platform supports only the fixed CCS mode (workaround 16016805146).
v2: Rebase, make it platform agnostic
v3: Minor code refactoring
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Prep this file to contain C6 toggling as well instead
of just sysfs related stuff.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The version is obtained via a dedicated MKHI GSC HECI command.
The compatibility version is what we want to match against for the GSC,
so we need to call the FW version checker after obtaining the version.
Since this is the first time we send a GSC HECI command via the GSCCS,
this patch also introduces common infrastructure to send such commands
to the GSC. Communication with the GSC FW is done via input/output
buffers, whose addresses are provided via a GSCCS command. The buffers
contain a generic header and a client-specific packet (e.g. PXP, HDCP);
the clients don't care about the header format and/or the GSCCS command
in the batch, they only care about their client-specific header. This
patch therefore introduces helpers that allow the callers to
automatically fill in the input header, submit the GSCCS job and decode
the output header, to make it so that the caller only needs to worry about
their client-specific input and output messages.
v3: squash of 2 separate patches ahead of merge, so that the common
functions and their first user are added at the same time
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.Com> #v1
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When the GSC FW is loaded, we need to inform it when a GSCCS reset is
coming and then wait 200ms for it to get ready to process the reset.
v2: move WA code to GSC file, use variable in Makefile (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add the basic definitions and init function. Same as HuC, GSC is only
supported on the media GT on MTL and newer platforms.
Note that the GSC requires submission resources which can't be allocated
during init (because we don't have the hwconfig yet), so it can't be
marked as loadable at the end of the init function. The allocation of
those resources will come in the patch that makes use of them to load
the FW.
v2: better comment, move num FWs define inside the enum (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We will be adding support for the SR-IOV and driver might be then
running, in addition to existing non-virtualized bare-metal mode,
also in Physical Function (PF) or Virtual Function (VF) mode.
Since these additional modes require some changes to the driver,
define enum flag to represent different SR-IOV modes and add a
function where we will detect the actual mode in the runtime.
We start with a forced bare-metal mode as it is sufficient to
enable basic functionality and ensures no impact to existing code.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231115073804.1861-2-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove unused IOCTL.
Without any userspace using it we need to remove before we
can be accepted upstream.
At this point we are breaking the compatibility for good,
so we don't need to break when we are in-tree. So, let's
also use this breakage to sort out the IOCTL entries and
fix all the small indentation and line issues.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
This introduces an exclusive version of vga decode for xe.
Rest of the display changes will be re-used from i915.
Currently it adds just a dummy implementation. VGA decode
needs to be handled correctly in i915, proper implementation
will be adopted once the i915 changes are finalized and merged
in upstream.
v2: Addressed Arun's review comments
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Arun R Murthy <arun.r.mruthy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there.
We do this by recompiling i915/display code twice.
Now that i915 has been adapted to support the Xe build, we can add
the xe/display support.
This initial work is a collaboration of many people and unfortunately
this squashed patch won't fully honor the proper credits.
But let's try to add a few from the squashed patches:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This workaround is primarily implemented by the BIOS. However if the
BIOS applies the workaround it will reserve a small piece of our DSM
(which should be at the top, right below the WOPCM); we just need to
keep that region reserved so that nothing else attempts to re-use it.
v2 (Gustavo):
- Check for NULL media_gt
- Mask bits [5:0] to avoid potential issues in future platforms
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231102124855.1940491-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are a set of engine group busyness counters provided by HW which are
perfect fit to be exposed via PMU perf events.
BSPEC: 46559, 46560, 46722, 46729, 52071, 71028
events can be listed using:
perf list
xe_0000_03_00.0/any-engine-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/copy-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/interrupts/ [Kernel PMU event]
xe_0000_03_00.0/media-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/render-group-busy-gt0/ [Kernel PMU event]
and can be read using:
perf stat -e "xe_0000_8c_00.0/render-group-busy-gt0/" -I 1000
time counts unit events
1.001139062 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
2.003294678 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
3.005199582 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
4.007076497 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
5.008553068 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
6.010531563 43520 ns xe_0000_8c_00.0/render-group-busy-gt0/
7.012468029 44800 ns xe_0000_8c_00.0/render-group-busy-gt0/
8.013463515 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
9.015300183 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.017233010 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.971934120 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
The pmu base implementation is taken from i915.
v2:
Store last known value when device is awake return that while the GT is
suspended and then update the driver copy when read during awake.
v3:
1. drop init_samples, as storing counters before going to suspend should
be sufficient.
2. ported the "drm/i915/pmu: Make PMU sample array two-dimensional" and
dropped helpers to store and read samples.
3. use xe_device_mem_access_get_if_ongoing to check if device is active
before reading the OA registers.
4. dropped format attr as no longer needed
5. introduce xe_pmu_suspend to call engine_group_busyness_store
6. few other nits.
v4: minor nits.
v5: take forcewake when accessing the OAG registers
v6:
1. drop engine_busyness_sample_type
2. update UAPI documentation
v7:
1. update UAPI documentation
2. drop MEDIA_GT specific change for media busyness counter.
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Co-developed-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some copy hardware engine instances are faster than others on PVC.
Use a virtual engine of these plus the reserved instance for the migrate
engine on PVC. The idea being if a fast instance is available it will be
used and the throughput of kernel copies, clears, and pagefault
servicing will be higher.
v2: Use OOB WA, use all copy engines if no WA is required
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
To workaround a HW bug on DG2, driver is required to map the whole
ppgtt virtual address space before GPU workload submission. Thus
set the XE_VM_FLAG_SCRATCH_PAGE flag during vm create so the whole
address space is mapped to point to scratch page.
v1:
- Move the workaround implementation from xe_vm_create to
xe_vm_create_ioctl - Brian
- Reorder error checking in xe_vm_create_ioctl - Jose
- Implement WA only for DG2-G10 and DG2-G12
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add engines sysfs directory under its GT and
create sub directory for all engine class
(note its not per instance) present on GT.
For example,
DUT# cat /sys/class/drm/cardX/device/tileN/gtN/engines/
bcs/ ccs/
V9 :
- Add missing drmm_add_action_or_reset
V8 :
- Rebase
V7 :
- Remove xe_gt.h from .h and include in .c - Matt
V6 :
- Add kernel doc and arrange file in make file by alphabet - Matt
V5 :
- replace xe_engine with xe_hw_engine - Matt
V4 :
- Rebase to resolve conflicts - CI
V3 :
- Move code in its own file
- Rename API name
V2 :
- Correct class mask logic - Himal
- Remove extra parenthesis
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is a preparation commit for a larger renaming of engine to exec queue.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add generic utility to track range conflicts signaled by a dma-fence.
Tracking implemented via an interval tree. An example use case being
tracking conflicts for pending (un)binds from multiple bind engines. By
being generic ths idea would this could moved to the DRM level and used
in multiple drivers for similar problems.
v2: Make interval tree functions static (CI)
v3: Remove non-static cleanup function (CI)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We have recently introduced tile for each gpu,
so lets add sysfs entry per tile for userspace
to provide required information specific to tile.
V5:
- define ktype as const
V4:
- Reorder headers - Aravind
V3:
- Make API to return void and add drm_warn - Aravind
V2:
- Add logs in failure path
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
1) Add a new sysfs directory under devices/gt#/ called gtidle
to contain idle properties of GT such as name, idle_status,
idle_residency_ms
2) Remove forcewake calls for residency counter
v2:
- abstract using function pointers (Anshuman)
- remove forcewake calls for residency counter
- use device_attr (Badal)
- move rc functions to guc_pc
- change name to gt_idle (Rodrigo)
v3:
- return error for drmm_add_action_or_reset
- replace file and functions with gt_idle prefix
to gt_idle_sysfs (Himal)
- use enum for gt idle state
- move multiplier to gt idle and initialize (Anshuman)
- correct doc annotation (Rodrigo)
- remove return variable
- use kobj_gt instead of new gtidle kobj
- move residency_ms to gtidle file
- retain xe_guc_pc prefix for functions in guc_rc file (Michal)
v4:
- fix doc errors in xe_guc_pc file
- change u64 to u32 for reading residency counter
- keep gtidle states generic GT_IDLE_C[0/6] (Anshuman)
v5:
- update commit message to include removal of
forcewake calls (Anshuman)
- return void from sysfs initialization function and add warnings
(Andi)
v6:
- remove extra lines (Anshuman)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We need to flush render caches before fence signalling, where we might
release the memory for reuse. We can't rely on userspace doing this,
so flush render caches after the batch, but before user fence- and
dma_fence signalling.
Copy the cache flush from i915, but omit PIPE_CONTROL_FLUSH_L3, since it
should be implied by the other flushes. Also omit
PIPE_CONTROL_TLB_INVALIDATE since there should be no apparent need to
invalidate TLB after batch completion.
v2:
- Update Makefile for OOB WA.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> #1
Reported-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/291
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/291
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GGTT exists at the tile level. When a tile contains multiple GTs,
they share the same GGTT.
v2:
- Include some changes that were mis-squashed into the VRAM patch.
(Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-9-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Let xe_guc.c start using XE_WA() for workarounds, starting from a simple
one: Wa_22012773006. It's also changed to start with graphics version
12, since that is the first supported by xe.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230526164358.86393-14-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are WAs that, due to their nature, cannot be applied from a
central place like xe_wa.c. Those are peppered around the rest of the
code, as needed. Now they have a new name: "out-of-band workarounds".
These workarounds have their names and rules still grouped in xe_wa.c,
inside the xe_wa_oob array, which is generated at compile time by
xe_wa_oob.rules and the hostprog xe_gen_wa_oob. The code generation
guarantees that the header xe_wa_oob.h contains the IDs for the
workarounds that match the index in the table. This way the runtime
checks that are spread throughout the code are simple tests against the
bitmap saved during initialization.
v2: Fix prev_name tracking not working when it's empty, i.e. when there
is more than 1 continuation rule.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230526164358.86393-13-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When doing out-of-tree builds with O= or KBUILD_OUTPUT=, it's important
to also add the directory where the target is saved. Otherwise any file
generated by the build system may not be available for other targets
depending on it.
The $(obj) is added automatically when building the entire kernel,
but it's not added when M=drivers/gpu/drm/xe is added.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230526164358.86393-12-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The goal is to use devcoredump infrastructure to report error states
captured at the crash time.
The error state will contain useful information for GPU hang debug, such
as INSTDONE registers and the current buffers getting executed, as well
as any other information that helps user space and allow later replays of
the error.
The proposal here is to avoid a Xe only error_state like i915 and use
a standard dev_coredump infrastructure to expose the error state.
For our own case, the data is only useful if it is a snapshot of the
time when the GPU crash has happened, since we reset the GPU immediately
after and the registers might have changed. So the proposal here is to
have an internal snapshot to be printed out later.
Also, usually a subsequent GPU hang can be only a cause of the initial
one. So we only save the 'first' hang. The dev_coredump has a delayed
work queue where it remove the coredump and free all the data within a
few moments of the error. When that happens we also reset our capture
state and allow further snapshots.
Right now this infra only print out the time of the hang. More information
will be migrated here on subsequent work. Also, in order to organize the
dump better, the goal is to propose dev_coredump changes itself to allow
multiple files and different controls. But for now we start Xe usage of
it without any dependency on dev_coredump core changes.
v2: Add dma_fence annotation for capture that might happen during long
running. (Thomas and Matt)
Use xe->drm.primary->index on drm_info msg. (Jani)
v3: checkpatch fixes
v4: Fix building and locking issues found by Francois.
Actually let's kill all of the locking in here. gt_reset serialization
already guarantee that there will be only one capture at the same time.
Also, the devcoredump has its own locking to protect the free and reads
and drivers don't need to duplicate it.
Besides this, the dma_fence locking was pushed to a following patch
since it is not needed in this one.
Fix a use after free identified by KASAN: Do not stash the faulty_engine
since that will be freed somewhere else.
v5: Fix Uptime - ktime_get_boottime actually returns the Uptime. (Francois)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
The macros to handle the RTP tables are very scary, but shouldn't be
used outside of the header adding the infra. Move it to a separate
header and make sure it's only included when it can be.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230427223256.1432787-11-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
