Add a separate initializer function for each model. Add separate
devic structures for G200 and G200SE, which require additional
information.
Also move G200's and G200SE's helpers for reading the BIOS and
version id into model-specific code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-3-tzimmermann@suse.de
Remove old test for 32-bit vs 16-bit colors. Prefer 24-bit color depth
on all devices. 32-bit color depth doesn't exist, it should have always
been 24-bit.
G200SE with less than 2 MiB of video memory have defaulted to 16-bit
color depth, as the original revision of the G200SE had only 1.75 MiB
of video memory. Using 16-bit colors enabled XGA resolution. But we
now already limit these devices to VGA resolutions as the memory-bandwith
test assumes 32-bit pixel size. So drop the special case from color-depth
selection.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-2-tzimmermann@suse.de
Split up the connector's mode_valid helper into a simple-pipe and a
mode-config helper. The simple-pipe helper tests for display-size
limits while the mode-config helper tests for memory-bandwidth limits.
Also add the mgag200_ prefix to mga_vga_calculate_mode_bandwidth() and
comment on the function's purpose.
The memory-bandwidth tests assume that the display uses 4 bytes per
pixel. The first models of G200SE-A only had 1.75 MiB of VRAM, which
limits these devices to 640x480-32.
v2:
* note the memory constraints on early G200SE-A
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-8-tzimmermann@suse.de
Test for a mode's memory requirements in the device-wide mode_valid
helper. For simplicify, always assume a 32-bit color format. While
some rejected modes would work with less colors, implementing this
is probably not worth the effort.
Also remove the memory-related test from the connector's mode_valid
helper. The test uses the bpp value that users can specify on the
kernel's command line. This value is unrelated and the test would
belong into atomic_check.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-7-tzimmermann@suse.de
struct mga_connector has outlived its purpose. Inline the rsp init
helper into the mode-config code and remove the data structure. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-6-tzimmermann@suse.de
Store the I2C state within struct mga_device and switch I2C to
managed release. Simplifies the related code and lets us remove
mga_connector_destroy().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-5-tzimmermann@suse.de
Provide drm_connector_helper_get_modes_from_ddc() to implement the
connector's get_modes callback. The new helper updates the connector
from DDC-provided EDID data.
v2:
* clear property if EDID is NULL in helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-4-tzimmermann@suse.de
Initialization of the I2C adapter was allowed to fail. The mgag200
driver would have continued without DDC support. Had this happened in
practice, it would have led to segmentation faults in the connector
code. Resolve this problem by failing driver initialization on I2C-
related errors.
v2:
* initialize 'ret' before drm_err() (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-3-tzimmermann@suse.de
DDC operation conflicts with concurrent mode setting. Acquire the
driver's I/O lock in get_modes to prevent this. This change should
have been part of commit 931e3f3a0e ("drm/mgag200: Protect
concurrent access to I/O registers with lock"), but apparently got
lost somewhere.
v3:
* fix commit message to say 'drm/mgag200' (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 931e3f3a0e ("drm/mgag200: Protect concurrent access to I/O registers with lock")
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-2-tzimmermann@suse.de
Add support for atomic update of gamma lut.
With this patch the "Night light" feature of gnome3
is working properly on mgag200.
v2:
- Add a default linear gamma function
- renamed functions with mgag200 prefix
- use format's 4cc code instead of bit depth
- use better interpolation for 16bits gamma
- remove legacy function mga_crtc_load_lut()
- can't remove the call to drm_mode_crtc_set_gamma_size()
because it doesn't work with userspace.
- other small refactors
v3:
- change mgag200_crtc_set_gamma*() argument
to struct drm_format_info *format
- fix printk format to %p4cc for 4cc and %zu for size_t
- rebased to drm-misc-next.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513084900.1832381-1-jfalempe@redhat.com
Some MGA200 hardware is broken and can't use a start address > 0.
v2: Warn if startaddr is not 0, and hw doesn't support it.
(instead of removing MGAG200_FLAG_HW_BUG_NO_STARTADD)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504134026.283417-4-jfalempe@redhat.com
When there are multiple damage clips, previous code merged them into one
big rectangle. As the Matrox memory is very slow, it's faster to copy each
damage clip.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504134026.283417-2-jfalempe@redhat.com
The driver does support damage clips, but doesn't advertise it.
So when running gnome/wayland on Matrox hardware, the full frame is
copied to the slow Matrox memory, which leads to very poor performances.
Add drm_plane_enable_fb_damage_clips() to advertise this capability to
userspace.
With this patch, gnome/wayland becomes usable on Matrox GPU.
Suggested-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504134026.283417-2-jfalempe@redhat.com
Add a mutex lock to protect concurrent access to I/O registers
against each other. This happens between invocation of commit-
tail functions and get-mode operations. Both with use the CRTC
index registers MGA1064_GEN_IO_DATA and MGA1064_GEN_IO_CTL.
Concurrent access can lead to failed mode-setting operations.
v2:
* fix typo in commit description (Jocelyn)
* add comment to explain rmmio_lock
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220502142514.2174-4-tzimmermann@suse.de
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device
-----BEGIN PGP SIGNATURE-----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=uRsT
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
commit f86c3ed559 ("drm/mgag200: Split PLL setup into compute and
update functions") introduced a regression for g200wb and g200ew.
The PLLs are not set up properly, and VGA screen stays
black, or displays "out of range" message.
MGA1064_WB_PIX_PLLC_N/M/P was mistakenly replaced with
MGA1064_PIX_PLLC_N/M/P which have different addresses.
Patch tested on a Dell T310 with g200wb
Fixes: f86c3ed559 ("drm/mgag200: Split PLL setup into compute and update functions")
Cc: stable@vger.kernel.org
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308174321.225606-1-jfalempe@redhat.com
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
-----BEGIN PGP SIGNATURE-----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=HuwD
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
------------------------
dma-buf:
- dma-buf-map: Rename to iosys-map (Lucas)
Core Changes:
-------------
drm:
- Always include the debugfs_entry in drm_crtc (Ville)
- Add orientation quirk for GPD Win Max (Anisse)
Driver Changes:
---------------
gvt:
- Constify some pointers. (Rikard Falkeborn)
- Use list_entry to access list members. (Guenter Roeck)
- Fix cmd parser error for Passmark9. (Zhenyu Wang)
i915:
- Various clean-ups including headers and removing unused and unnecessary stuff\
(Jani, Hans, Andy, Ville)
- Cleaning up on our registers definitions i915_reg.h (Matt)
- More multi-FBC refactoring (Ville)
- Baytrail backlight fix (Hans)
- DG1 OPROM read through SPI controller (Clint)
- ADL-N platform enabling (Tejas)
- Fix slab-out-of-bounds access (Jani)
- Add opregion mailbox #5 support for possible EDID override (Anisse)
- Fix possible NULL dereferences (Harish)
- Updates and fixes around display voltage swing values (Clint, Jose)
- Fix RPM wekeref on PXP code (Juston)
- Many register definitions clean-up, including planes registers (Ville)
- More conversion towards display version over the old gen (Madhumitha, Ville)
- DP MST ESI handling improvements (Jani)
- drm device based logging conversions (Jani)
- Prevent divide by zero (Dan)
- Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville)
- Async flip optimization for DG2 (Stanislav)
- Multiple DSC and bigjoiner fixes and improvements (Ville)
- Fix ADL-P TypeC Phy ready status readout (Imre)
- Fix up DP DFP 4:2:0 handling more display related fixes (Ville)
- Display M/N cleanup (Ville)
- Switch to use VGA definitions from video/vga.h (Jani)
- Fixes and improvements to abstract CPU architecture (Lucas)
- Disable unsused power wells left enabled by BIOS (Imre)
- Allow !join_mbus cases for adlp+ dbuf configuration (Ville)
- Populate pipe dbuf slices more accurately during readout (Ville)
- Workaround broken BIOS DBUF configuration on TGL/RKL (Ville)
- Fix trailing semicolon (Lucas)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmIChLkACgkQ+mJfZA7r
E8rDOgf9GdgD5PIqly1zCjfpN0z15KXS6kn6lDlthcZMQ2INpAjfo7sOhpAdcb5h
ptoKkBxD0p+VlLWTR14+N1/DXV8lvxgdfbee2XHdG2+750eBjcjdYNakDj+lGZJ6
AVO5pNJRa6WEMd4pesm53CJMHlgSzydRCl66PobHrqqeHahO4VGh4Y9jqoJ3JzvD
unO1iWrss/i9HvJrefcrUKPGkpb9u59dzsiM9Q3rCNSsPg3ik7Mz1LLPEyHEHyUi
7vs8ugjN2UiZZELnMJIiCBwHs1xN0O3oS4YkjjTzZXMWc+cvY9mFpGbIWMffYpMY
qijXJLO8Fh57SN0G6EPaCjNyQbm8Gw==
=/7VU
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2022-02-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
------------------------
dma-buf:
- dma-buf-map: Rename to iosys-map (Lucas)
Core Changes:
-------------
drm:
- Always include the debugfs_entry in drm_crtc (Ville)
- Add orientation quirk for GPD Win Max (Anisse)
Driver Changes:
---------------
gvt:
- Constify some pointers. (Rikard Falkeborn)
- Use list_entry to access list members. (Guenter Roeck)
- Fix cmd parser error for Passmark9. (Zhenyu Wang)
i915:
- Various clean-ups including headers and removing unused and unnecessary stuff\
(Jani, Hans, Andy, Ville)
- Cleaning up on our registers definitions i915_reg.h (Matt)
- More multi-FBC refactoring (Ville)
- Baytrail backlight fix (Hans)
- DG1 OPROM read through SPI controller (Clint)
- ADL-N platform enabling (Tejas)
- Fix slab-out-of-bounds access (Jani)
- Add opregion mailbox #5 support for possible EDID override (Anisse)
- Fix possible NULL dereferences (Harish)
- Updates and fixes around display voltage swing values (Clint, Jose)
- Fix RPM wekeref on PXP code (Juston)
- Many register definitions clean-up, including planes registers (Ville)
- More conversion towards display version over the old gen (Madhumitha, Ville)
- DP MST ESI handling improvements (Jani)
- drm device based logging conversions (Jani)
- Prevent divide by zero (Dan)
- Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville)
- Async flip optimization for DG2 (Stanislav)
- Multiple DSC and bigjoiner fixes and improvements (Ville)
- Fix ADL-P TypeC Phy ready status readout (Imre)
- Fix up DP DFP 4:2:0 handling more display related fixes (Ville)
- Display M/N cleanup (Ville)
- Switch to use VGA definitions from video/vga.h (Jani)
- Fixes and improvements to abstract CPU architecture (Lucas)
- Disable unsused power wells left enabled by BIOS (Imre)
- Allow !join_mbus cases for adlp+ dbuf configuration (Ville)
- Populate pipe dbuf slices more accurately during readout (Ville)
- Workaround broken BIOS DBUF configuration on TGL/RKL (Ville)
- Fix trailing semicolon (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YgKFLmCgpv4vQEa1@intel.com
Rename struct dma_buf_map to struct iosys_map and corresponding APIs.
Over time dma-buf-map grew up to more functionality than the one used by
dma-buf: in fact it's just a shim layer to abstract system memory, that
can be accessed via regular load and store, from IO memory that needs to
be acessed via arch helpers.
The idea is to extend this API so it can fulfill other needs, internal
to a single driver. Example: in the i915 driver it's desired to share
the implementation for integrated graphics, which uses mostly system
memory, with discrete graphics, which may need to access IO memory.
The conversion was mostly done with the following semantic patch:
@r1@
@@
- struct dma_buf_map
+ struct iosys_map
@r2@
@@
(
- DMA_BUF_MAP_INIT_VADDR
+ IOSYS_MAP_INIT_VADDR
|
- dma_buf_map_set_vaddr
+ iosys_map_set_vaddr
|
- dma_buf_map_set_vaddr_iomem
+ iosys_map_set_vaddr_iomem
|
- dma_buf_map_is_equal
+ iosys_map_is_equal
|
- dma_buf_map_is_null
+ iosys_map_is_null
|
- dma_buf_map_is_set
+ iosys_map_is_set
|
- dma_buf_map_clear
+ iosys_map_clear
|
- dma_buf_map_memcpy_to
+ iosys_map_memcpy_to
|
- dma_buf_map_incr
+ iosys_map_incr
)
@@
@@
- #include <linux/dma-buf-map.h>
+ #include <linux/iosys-map.h>
Then some files had their includes adjusted and some comments were
update to remove mentions to dma-buf-map.
Since this is not specific to dma-buf anymore, move the documentation to
the "Bus-Independent Device Accesses" section.
v2:
- Squash patches
v3:
- Fix wrong removal of dma-buf.h from MAINTAINERS
- Move documentation from dma-buf.rst to device-io.rst
v4:
- Change documentation title and level
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
Remove custom mgag200_init() and mgag200_exit() functions and initialize
the module with DRM_module helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217144615.32733-7-tzimmermann@suse.de
On some servers with MGA G200_SE_A (rev 42), booting with Legacy BIOS,
the hardware hangs when using kdump and kexec into the kdump kernel.
This happens when the uncompress code tries to write "Decompressing Linux"
to the VGA Console.
It can be reproduced by writing to the VGA console (0xB8000) after
booting to graphic mode, it generates the following error:
kernel:NMI: PCI system error (SERR) for reason a0 on CPU 0.
kernel:Dazed and confused, but trying to continue
The root cause is the configuration of the MGA GCTL6 register
According to the GCTL6 register documentation:
bit 0 is gcgrmode:
0: Enables alpha mode, and the character generator addressing system is
activated.
1: Enables graphics mode, and the character addressing system is not
used.
bit 1 is chainodd even:
0: The A0 signal of the memory address bus is used during system memory
addressing.
1: Allows A0 to be replaced by either the A16 signal of the system
address (ifmemmapsl is ‘00’), or by the hpgoddev (MISC<5>, odd/even
page select) field, described on page 3-294).
bit 3-2 are memmapsl:
Memory map select bits 1 and 0. VGA.
These bits select where the video memory is mapped, as shown below:
00 => A0000h - BFFFFh
01 => A0000h - AFFFFh
10 => B0000h - B7FFFh
11 => B8000h - BFFFFh
bit 7-4 are reserved.
Current code set it to 0x05 => memmapsl to b01 => 0xa0000 (graphic mode)
But on x86, the VGA console is at 0xb8000 (text mode)
In arch/x86/boot/compressed/misc.c debug strings are written to 0xb8000
As the driver doesn't use this mapping at 0xa0000, it is safe to set it to
0xb8000 instead, to avoid kernel hang on G200_SE_A rev42, with kexec/kdump.
Thus changing the value 0x05 to 0x0d
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119102905.1194787-1-jfalempe@redhat.com
The "nomodeset" kernel cmdline parameter is handled by the vgacon driver
but the exported vgacon_text_force() symbol is only used by DRM drivers.
It makes much more sense for the parameter logic to be in the subsystem
of the drivers that are making use of it.
Let's move the vgacon_text_force() function and related logic to the DRM
subsystem. While doing that, rename it to drm_firmware_drivers_only() and
make it return true if "nomodeset" was used and false otherwise. This is
a better description of the condition that the drivers are testing for.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-4-javierm@redhat.com
Move destination-buffer clipping from all format-helper memcpy
function into callers. Support destination-buffer pitch. Only
distinguish between system and I/O memory, but use same logic
everywhere.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-3-tzimmermann@suse.de
Replace arch_phys_wc_add() and arch_io_reserve_memtype_wc() with
the rsp managed functions. Allows for removing the cleanup code
for memory management
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-5-tzimmermann@suse.de
The variable delta is not initialized and this will cause unexpected
behaviour with the comparison of tmpdelta < delta. Fix this by setting
it to 0xffffffff. This matches the behaviour as in the similar function
mgag200_pixpll_compute_g200se_04.
v2:
* move fix up by one line to align style with other functions
* add additional tags from similar patch
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Fixes: 2545ac9603 ("drm/mgag200: Abstract pixel PLL via struct mgag200_pll")
Addresses-Coverity: ("Uninitialized scalar variable")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210817163204.494166-1-colin.king@canonical.com
PLL setup can fail if the display mode's clock is not supported by
any PLL configuration. Compute the PLL values during atomic check, so
that atomic commits can fail at the appropriate time. If successful,
use the values in the atomic-update phase.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-14-tzimmermann@suse.de
Inherit from struct drm_crtc_state by embeding it and providing the
rsp callbacks for simple-kms helpers. No functional changes.
The new state struct mgag200_crtc_state will hold PLL values for modeset
operations.
v2:
* move the simple-kms changes into a separate patch (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-13-tzimmermann@suse.de
Move all PLL compute and update functions into mgag200_pll.c. No
functional changes to the rsp algorithms.
Introduce struct mgag200_pll and mgag200_pll_funcs. The data strutures
abstract the details of each revision's PLL. Perform calls to compute
and update functionality via function pointers. Init the PLL once as
part of the driver initialization.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-11-tzimmermann@suse.de
The fields in struct mgag200_pll_values currently hold the bits of
each register. Store the PLL values instead and let the PLL-update
code figure out the bits for each register.
Until now, the compute function either stored plain values or register
bits in struct mgag200_pll_values. The rsp update function used the
values as-is. This made it very hard to correctly interpret the stored
values (e.g., for logging or debugging). With the cleanup, the stored
values now have a clear meaning.
v2:
* add a bit more context in the commit message (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-7-tzimmermann@suse.de
The S parameter is controls the loop filter bandwidth when programming
the PLL. It's currently stored as part of P (i.e., the clock divider.)
Add a separate variable for S prepares the PLL code for further
refactoring. The value of s is currently 0, so it has not yet an effect
on the programming.
v2:
* add a note on the current value of s to commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-6-tzimmermann@suse.de
The _set_plls() functions compute a pixel clock's PLL values
and program the hardware accordingly. This happens during atomic
commits.
For atomic modesetting, it's better to separate computation and
programming from each other. This will allow to compute the PLL
value during atomic checks and catch unsupported modes early.
Split the PLL setup into a compute and an update functions, and
call them one after the other. Computed PLL values are store in
struct mgag200_pll_values. There are four parameters for the PLL,
m, n, p and s. Every compute function stores a value for each
of these parameters, and the rsp update function makes the register
bits from them. The values stored by the compute function are
either plain values or register bits. An additional change is
required to always store plain values.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-5-tzimmermann@suse.de
Return -EINVAL if there's no PLL configuration for the given pixel
clock. The returned errors are currently ignored by the caller, but
the errno codes will become useful when the compute functions run
during atomic checks.
v2:
* give a rational for this change (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-3-tzimmermann@suse.de
Put the clock-selection code into each of the PLL-update functions to
make them select the correct pixel clock. Instead of copying the code,
introduce a new helper WREG_MISC_MASKED, which does masked writes into
<MISC>. Use it from each individual PLL update function.
The pixel clock for video output was not actually set before programming
the clock's values. It worked because the device had the correct clock
pre-set.
v2:
* don't duplicate <MISC> update code (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: db05f8d3dc ("drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.9+
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-2-tzimmermann@suse.de
Inline mgag200_device_init() into mgag200_device_create(), which is
the only caller. Also remove a duplicate error message for
mgag200_modeset_init(). The function will print an error if/where it
failed.
v2:
* include a note about the removed error message in
changelog (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075642.27834-3-tzimmermann@suse.de
Print the name of the DRM driver when taking over fbdev devices. Makes
the output to dmesg more consistent. Note that the driver name is only
used for printing a string to the kernel log. No UAPI is affected by this
change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i
Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson
Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
The memcpy's destination buffer might have a different pitch than the
source. Support different pitches as function argument.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-2-tzimmermann@suse.de
Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the damage handler into prepare_fb and cleanup_fb callbacks.
The mapping is provided as GEM shadow-buffered plane. The functions in
the commit tail use the pre-established mapping for damage handling.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-5-tzimmermann@suse.de
Don't populate the const array m_div_val on the stack but instead make
it static. Makes the object code smaller by 29 bytes:
Before:
text data bss dec hex filename
34736 4552 0 39288 9978 drivers/gpu/drm/mgag200/mgag200_mode.o
After:
text data bss dec hex filename
34625 4616 0 39241 9949 drivers/gpu/drm/mgag200/mgag200_mode.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204191156.110778-1-colin.king@canonical.com
This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM backends are
converted as well. For most of them, this simply changes the returned type.
TTM-based drivers now return information about the location of the memory,
either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap()
et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of
implementing their own vmap callbacks.
v7:
* init QXL cursor to mapped BO buffer (kernel test robot)
v5:
* update vkms after switch to shmem
v4:
* use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian)
* fix a trailing { in drm_gem_vmap()
* remove several empty functions instead of converting them (Daniel)
* comment uses of raw pointers with a TODO (Daniel)
* TODO list: convert more helpers to use struct dma_buf_map
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de
Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- nouveau, because DRIVER_ATOMIC uapi is still not the default on the
platforms where it's supported (i.e. again driver_feature mangling)
- vc4, again because of driver_feature mangling
- qxl, because the ioctl table is somewhere else and moving that is
maybe a bit too much, hence the num_ioctls assignment prevents a
const driver structure.
- arcpgu, because that is stuck behind a pending tiny-fication series
from me.
- legacy drivers, because legacy requires non-const drm_driver.
Note that for armada I also went ahead and made the ioctl array const.
Only cc'ing the driver people who've not been converted (everyone else
is way too much).
v2: Fix one misplaced const static, should be static const (0day)
v3:
- Improve commit message (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: kernel test robot <lkp@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
When building imgag200 for the alpha architecture it fails like this:
mgag200_drv.c:233:9: error: implicit declaration of function ‘vmalloc’
233 | bios = vmalloc(size);
| ^~~~~~~
| kmalloc
When building for other architectures vmalloc.h is pulled in via some
other header file - for example asm-generic/io.h.
Use an explicit include of vmalloc.h to fix the build.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: e20dfd27f7 ("drm/mgag200: Add support for G200 desktop cards")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Egbert Eich <eich@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200807180547.GA923146@ravnborg.org
The initial value of the PCI option register got lost while refactoring
the driver init code. Restore the setting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 2021708e0d ("drm/mgag200: Initialize PCI registers early during device setup")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804065158.21049-1-tzimmermann@suse.de
This patch adds support for G200 desktop cards. We can reuse the whole
memory and modesetting code. A few PCI and DAC register values have to
be updated accordingly.
The most significant change is in the PLL setup. The driver parses the
device's BIOS to retrieve clock limits and reference clocks. With no BIOS
found, safe defaults are being used.
v2:
* copy BIOS ROM to system memory and access with regular
load/store; resolves potential HW limitations
* fix some stray whitespaces
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Co-developed-by: Egbert Eich <eich@suse.com>
Signed-off-by: Egbert Eich <eich@suse.com>
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-9-tzimmermann@suse.de
The unique revision id is only useful for G200SE devices. Store the
value in model-specific data within struct mga_device. While at it,
the patch also adds an init helper for the value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-8-tzimmermann@suse.de
MGA cards can run in traditional VGA mode or an enhanced MGA mode; with
the latter being required for KMS. So far, MGA mode was enabled during
modesetting. As it's fundamental for device operation, the patch moves
it next to the device register setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-5-tzimmermann@suse.de
So far, PCI option registers were initialized as part of modesetting,
which is late in the process. As these registers control fundamental
operation, they should be set early.
The patch moves the PCI option handling into device register setup,
before even the device MMIO memory is being mapped. No functional
changes made.
Moving the PCI code next to the device-register setup also allows to
remove the has_sdram field from struct mga_device. The state is now
local to the init helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-4-tzimmermann@suse.de
The mgag200 driver maps registers into the address space. Move the
code into a separate helper function. No functional changes.
One small difference is in the handling of SDRAM/SGRAM. MGA devices
can come with either SDRAM or SGRAM. So far, the driver checked for
SDRAM, which is the common case. The patch moves this code into a
separate helper and checks for SGRAM, which is the special case. The
test itself is the same as before.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-3-tzimmermann@suse.de
SHMEM pages use write-combine caching by default, but can also use the
platform's default page caching. Doing so may improve the performance
of I/O on the framebuffer.
Mgag200's hardware does not access framebuffer pages directly (i.e.,
via DMA), so enabling caching does not have an effect on consistency
of the framebuffer memory or the displayed data.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-2-tzimmermann@suse.de
The prepare and commit helpers for G200WB devices control the BMC.
Rename them accordingly. While at it, also change the passed value's
type to struct mga_device and remove some type upcasting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-7-tzimmermann@suse.de
Modifying the <syncrst> field in mgag200_{enable,disable}_display()
makes the code more readable. Also clear the <asyncrst> field to enable
the display. The other bits in SEQ0 are unused, so no functional changes
are made.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-6-tzimmermann@suse.de
Of the DPMS code, only ON and OFF states are used. Simplify mode setting
by moving both into separate functions and removing the rest.
The original code busy waited in the middle of updating the screen state
in SEQ1. To simplify the procedure, the new code busy waits first and then
updates SEQ1 in one chunk.
The DPMS code also set the LUT before enabling the screen. The patch moves
this code into the simple-display pipe's enable function.
v2:
* comment on SEQ1 updates in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-5-tzimmermann@suse.de
The simple pipe's disable function disables the screen by calling
mgag200_disable_screen(). The simple pipe's enable function enables the
screen by calling mgag200_enable_display().
During modeset operations the screen is off and remains off. It's only
enabled after the modeset has been completed. Therefore remove all code
that sets or clears the <scroff> field while in modeset.
The related code also modifies the <syncrst> field in SEQ0. For now, keep
this code in place.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-4-tzimmermann@suse.de
The prepare function write-protects several registers that it doesn't
even touch. Removed the related code.
The code for unprotecting registers also clears VINT interrupts. Both
is now done once during initialization.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-2-tzimmermann@suse.de
The mgag200 driver now uses managed functions for DRM devices. The
individual helpers for modesetting and memory managed are already
covered, so only device allocation and initialization is left for
conversion.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-15-tzimmermann@suse.de
Following current best practice, the instance of struct drm_device is now
embedded in struct mga_device. The respective field has been renamed from
'dev' to 'base' to reflect the relationship. Conversion from DRM device is
done via upcast. Using dev_private is no longer possible.
The patch also open-codes drm_dev_alloc() and DRM device initialization
is now performed by a call to drm_device_init().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-14-tzimmermann@suse.de
Instances of struct drm_device and struct mga_device are now allocated
next to each other in mgag200_driver_load(). Yet another preparation
before embedding the DRM device instance in struct mga_device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-13-tzimmermann@suse.de
Embedding the DRM device instance in struct mga_device will require
changes to device allocation. Moving the device initialization into
its own functions gets it out of the way.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-12-tzimmermann@suse.de
Moving the initializer and cleanup functions for device instances
to mgag200_drv.c prepares for the conversion to managed code. No
functional changes are made. Remove mgag200_main.c, which is now
empty.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-11-tzimmermann@suse.de
Support for HW cursors got remove by commit 5a77e2bfdd ("drm/mgag200:
Remove HW cursor") Apparently the source file was not deleted. Removed
it now.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 5a77e2bfdd ("drm/mgag200: Remove HW cursor")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-3-tzimmermann@suse.de
Spelling out _unlocked for each and every driver is a annoying.
Especially if we consider how many drivers, do not know (or need to)
about the horror stories involving struct_mutex.
Just drop the suffix. It makes the API cleaner.
Done via the following script:
__from=drm_gem_object_put_unlocked
__to=drm_gem_object_put
for __file in $(git grep --name-only $__from); do
sed -i "s/$__from/$__to/g" $__file;
done
Cc: Dave Airlie <airlied@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-24-emil.l.velikov@gmail.com
The VRAM helpers managed the framebuffer memory for mgag200. This came
with several problems, as some MGA device require the scanout address
to be located at VRAM offset 0. It's incompatible with the page-flip
semantics of DRM's atomic modesettting. With atomic modesetting, old and
new framebuffers have to be located in VRAM at the same time. So at least
one of them has to reside at a non-0 offset.
This patch replaces VRAM helpers with SHMEM helpers. GEM SHMEM buffers
reside in system memory, and are shadow-copied into VRAM during page
flips. The shadow copy always starts at VRAM offset 0.
v2:
* revert dev->pdev changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-16-tzimmermann@suse.de
The mgag200 supports a single pipeline with only a primary plane. It can
be converted to simple KMS helpers. This also adds support for atomic
modesetting. Wayland compositors, which use pageflip ioctls, can now be
used with mgag200.
v2:
* prepare encoder and CRTC in a separate patch
* remove suspend/resume code in a separate patch
* don't call set_format_regs() in pipe_update()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-15-tzimmermann@suse.de
The MGA CRTC data structure struct mga_crtc contains unused additional
fields; so it can removed. The standard DRM CRTC and encoder structures
are embedded now in struct drm_simple_display_pipe. Done in preparation
of converting mgag200 to simple KMS helpers.
v3:
* remove now-unused define MGAG200FB_CONN_LIMIT
* remove unused define MATROX_DPMS_CLEARED
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-14-tzimmermann@suse.de
The suspend/resume helpers are unused. Also remove associated state
from struct mga_device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-13-tzimmermann@suse.de
Registers are initialized with constants. This is now done in
mgag200_init_regs(), mgag200_set_dac_regs() and mgag200_set_pci_regs().
Later patches should move these calls from mode setting to device
initialization.
v2:
* replace uint8_t with u8
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-12-tzimmermann@suse.de
The hiprivlvl settings are now updated in mgag200_g200se_set_hiprilvl()
and mgag200_g200ev_set_hiprilvl().
v2:
* replace uint8_t with u8
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-11-tzimmermann@suse.de
The TAGFIFO state is now reset in mgag200_g200er_reset_tagfifo().
v2:
* define MGAREG_SEQ1_SCROFF
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-10-tzimmermann@suse.de
The primary plane's format registers are now updated in a
mgag200_set_format_regs().
v2:
* get bpp shift from helper function
* replace uint8_t with u8
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-9-tzimmermann@suse.de
The framebuffer's pitch is now set in mgag200_set_offset().
v2:
* move offset and bpp-shift calculation into helper functions
* use u8 instead of uint8_t
* add MGAREG_CRTCEXT0_OFFSET_MASK
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-8-tzimmermann@suse.de
Setting the plane registers first and the mode registers afterwards
reproduces the sequence used by atomic helpers. Done in preparation
of switching to simple KMS helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-7-tzimmermann@suse.de
Set different fields in MISC in their rsp location in the code. This
patch also fixes a bug in the original code where the mode's SYNC flags
were never written into the MISC register.
v2:
* use u8 instead of uint8_t
* define MGAREG_MISC_CLK_SEL_MASK
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-6-tzimmermann@suse.de
The mode-setting code is now located in mgag200_set_mode_regs(), sans
a few flags that will be moved in a later patch for clarity.
v2:
* replace uint8_t with u8
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-5-tzimmermann@suse.de
The function now only takes the device structure, and the old and new
framebuffers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-4-tzimmermann@suse.de
All register names and fields are now named according to the
MGA programming manuals. The function doesn't need the CRTC, so
callers pass in the device structure directly. The logging now
uses device-specific macros.
The original implementation busy-waited for the VSYNC flag to go
up, to synchronize the page flip with the display's vblank. This
code has been moved to mga_crtc_mode_set_base(). It's still present
in the non-atomic code paths, but won't be used in atomic commits.
With atomic, we should use interrupts to synchronize with vblanks.
v3:
* clarify commit message wrt. vblank busy-waiting
v2:
* use to_mga_device()
* use MiB instead of MB
* replace empty while loop with do-while, fixes checkpatch warning
* replace uint{8,32}_t with u{8,32}
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-3-tzimmermann@suse.de
The HW cursor of Matrox G200 cards only supports a 16-color palette
format. Univeral planes require at least ARGB or a similar component-
based format, so remove the HW cursor.
Alternatively, the driver could dither a cursor image from ARGB to
16 colors. But this does not produce pleasent-looking results in
general, so it's useless for modern compositors.
Without HW support, compositors will use software rendering.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-2-tzimmermann@suse.de
Storing the connector instance in struct mga_device avoids some
dynamic memory allocation. On errors, the connector's initializer
function now destroys the i2c structure. Done in preparation of
converting mgag200 to simple-KMS helpers.
v2:
* improved commit message (Michael)
* fixed error message for mgag200_vga_connector_init() (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-7-tzimmermann@suse.de
Mode configuration is now cleanued up automatically. While at it,
move all mode-config code into mgag200_mode.c. Done in preparation
of switching mgag200 to simple-KMS helpers.
v2:
* improve commit message (Sam)
* rebased during cherry pick
* also move bpp_shift initialization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-5-tzimmermann@suse.de
Done in preparation of embedding the DRM device in struct mga_device.
This patch makes the patch for embedding more readable.
v2:
* improved commit message (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-3-tzimmermann@suse.de
Mgag200 uses dev_private to look up struct mga_device for instances
of struct drm_device. Use of dev_private is deprecated, so hide it in
the helper function to_mga_device().
v2:
* make to_mga_device() a function (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-2-tzimmermann@suse.de
Generic fbdev support is a DRM client. Set it up after registering
the new DRM device. Remove the error checks as the driver's probe
function should not depend on a DRM client's state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-7-tzimmermann@suse.de
The mgag200 driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.
v4:
* print error message with drm_err()
v3:
* init pre-allocated encoder with drm_simple_encoder_init()
v2:
* rebase onto new simple-encoder interface
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228081828.18463-4-tzimmermann@suse.de
For hardware that does not interpret the startadd field correctly,
add the module parameter 'hw_bug_no_startadd', which enables the
workaround.
v3:
* style and typo fixes
v2:
* ask user for feedback if the option is active
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: John Donnelly <john.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101950.11989-1-tzimmermann@suse.de
TTM is an implementation detail of the VRAM helpers and therefore
shouldn't be exposed to the callers. There's only one correct value
for the BO device anyway, which is the one stored in the DRM device.
So remove struct ttm_bo_device from the VRAM-helper interface and
use the device's VRAM manager unconditionally. The GEM initializer
function fails if the VRAM manager has not been initialized.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-8-tzimmermann@suse.de
The flag 'interruptible', which is passed to various functions,
is always set to be false. Remove it and hard-code the value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-7-tzimmermann@suse.de
Adding the pitch alignment as an argument to
drm_gem_vram_fill_create_dumb() allows to align scanlines to certain
offsets. A value of 0 disables scanline pitches.
v3:
* only do power-of-2 test if pitch_align given; fails otherwise
* mgag200: call drm_gem_vram_fill_create_dumb() with pitch_align
v2:
* split of patch from related hibmc changes
* test if scanline pitch is power of 2
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203083819.6643-4-tzimmermann@suse.de
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----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=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
Several MGA G200 SE machines don't respect the value of the startadd
register field. After more feedback on affected machines, neither PCI
subvendor ID nor the internal ID seem to hint towards the bug. All
affected machines have a PCI ID of 0x0522 (i.e., G200 SE A). It was
decided to flag all G200 SE A machines as broken.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: 1591fadf85 ("drm/mgag200: Add workaround for HW that does not support 'startadd'")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: John Donnelly <john.p.donnelly@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206081901.9938-1-tzimmermann@suse.de
There's at least one system that does not interpret the value of
the device's 'startadd' field correctly, which leads to incorrectly
displayed scanout buffers. Always placing the active scanout buffer
at offset 0 works around the problem.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: John Donnelly <john.p.donnelly@oracle.com>
Tested-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 81da87f63a ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://gitlab.freedesktop.org/drm/misc/issues/7
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-4-tzimmermann@suse.de
The flags field in struct mga_device has been unused so far. We now
use it to store flag bits from the PCI driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 81da87f63a ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
Cc: John Donnelly <john.p.donnelly@oracle.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-3-tzimmermann@suse.de
Adds a conversion function that extracts the device type from the
PCI id-table flags. Allows for storing additional information in the
other flag bits.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 81da87f63a ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: John Donnelly <john.p.donnelly@oracle.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-2-tzimmermann@suse.de
Not needed any more because we don't have vram specific fops
any more. DEFINE_DRM_GEM_FOPS() can be used instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191016115203.20095-12-kraxel@redhat.com
By putting cursor BOs at the high end of the video memory, we can avoid
memory fragmentation. Starting at the low end, contiguous video memory is
available for framebuffers.
The patch also simplifies the buffer swapping and aligns it with the
ast driver. If there are more drivers with similar requirements, the
code could be moved into a shared place.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-8-tzimmermann@suse.de
The double-buffered cursor image is currently stored in video memory
by creating two BOs and pinning them to VRAM. The exact location is
chosen by VRAM helpers. The pinned cursor BOs can conflict with
framebuffer BOs and prevent the primary plane from displaying its
framebuffer.
As a first step to solving this problem, we reserve dedicated space at
the high end of the video memory for the cursor images. As the amount
of video memory now differs from the amount of available framebuffer
memory, size tests are adapted accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-7-tzimmermann@suse.de
Separating the management of buffer objects from updating the hardware
cursor buffer gives the code more structure. While doing this, we can
further split the image-update code into code for writing the buffer,
setting the base scan-out address, and enabling the cursor. The first
two operations are in dedicated functions update() and set_base().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-5-tzimmermann@suse.de
This 3 non-atomic drivers all have the same function getting the
only encoder available in the connector, also atomic drivers have
this fallback. So moving it a common place and sharing between atomic
and non-atomic drivers.
While at it I also removed the mention of
drm_atomic_helper_best_encoder() that was renamed in
commit 297e30b5d9 ("drm/atomic-helper: Unexport
drm_atomic_helper_best_encoder").
v3: moving drm_connector_get_single_encoder to drm_kms_helper module
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913232857.389834-1-jose.souza@intel.com
VRAM MM and GEM VRAM buffer objects are only used with each other;
connected via 3 function pointers. Simplify this code by making the
memory manager call the rsp. functions of the BOs directly; and
remove the functions from the BO's public interface.
v2:
* typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911110910.30698-3-tzimmermann@suse.de
The separation between GEM VRAM objects and the memory manager is
artificial, as they are only used with each other. Copying both
implementations into the same file is a first step to simplifying
the code.
This patch only moves code without functional changes.
v3:
* update to use dev->vma_offset_manager
v2:
* update for debugfs support
* typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911110910.30698-2-tzimmermann@suse.de
Currently the displayed cursor buffer might be evicted from video memory.
Not unpinning the BO fixes this problem. At this point, pixels_current
also references the BO and it will be unpinned during the next cursor
update.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 94dc57b103 ("drm/mgag200: Rewrite cursor handling")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723075425.24028-4-tzimmermann@suse.de
The hardware requires the correct memory address of the buffer. Currently
the same BO's address is programmed unconditionally, so only every second
cursor update actually becomes visible.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 94dc57b103 ("drm/mgag200: Rewrite cursor handling")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723075425.24028-3-tzimmermann@suse.de
The cursor BO has to be pinned to video ram while it's being displayed.
With the current code, the BO might be pinned to system memory instead.
The patch fixes this problem.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 94dc57b103 ("drm/mgag200: Rewrite cursor handling")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723075425.24028-2-tzimmermann@suse.de
This patch replaces mgag200's framebuffer console with DRM's generic
implememtation. All respective code is being removed from the driver.
The console is set up with a shadow buffer. The actual buffer object is
not permanently pinned in video ram, but just another buffer object that
the driver moves in and out of vram as necessary. The driver's function
mga_crtc_do_set_base() used to contain special handling for the framebuffer
console. With the new generic framebuffer, the driver does not need this
code an longer.
For consistency, this patch also changes the preferred framebuffer depth.
The original code used 24 bpp by default and 32 bpp for the framebuffer. As
24 bpp is not well supported by userspace anyway, setting 32 bpp as default
makes sense.
v2:
* rely on fbdev helpers error messages
* document changes to preferred depth
* dirty function no longer required
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315832/
Drop use of the deprecated drmP.h header file.
Replace with necessary include files to fix build.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190623103542.30697-5-sam@ravnborg.org
The mgag200 driver's struct mga_framebuffer is a buffer object with GEM
interface. There are already GEM framebuffer helpers that implement the
same functionality. Convert mgag200 to these.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627080909.30471-1-tzimmermann@suse.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Gj1MeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGctkH/0At3+SQPY2JJSy8
i6+TDeytFx9OggeGLPHChRfehkAlvMb/kd34QHnuEvDqUuCAMU6HZQJFKoK9mvFI
sDJVayPGDSqpm+iv8qLpMBPShiCXYVnGZeVfOdv36jUswL0k6wHV1pz4avFkDeZa
1F4pmI6O2XRkNTYQawbUaFkAngWUCBG9ECLnHJnuIY6ohShBvjI4+E2JUaht+8gO
M2h2b9ieddWmjxV3LTKgsK1v+347RljxdZTWnJ62SCDSEVZvsgSA9W2wnebVhBkJ
drSmrFLxNiM+W45mkbUFmQixRSmjv++oRR096fxAnodBxMw0TDxE1RiMQWE6rVvG
N6MC6xA=
=+B0P
-----END PGP SIGNATURE-----
Merge v5.2-rc5 into drm-next
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The cursor handling in mgag200 is complicated to understand. It touches a
number of different BOs, but doesn't really use all of them.
Rewriting the cursor update reduces the amount of cursor state. There are
two BOs for double-buffered HW updates. The source BO updates the one that
is currently not displayed and then switches buffers. Explicit BO locking
has been removed from the code. BOs are simply pinned and unpinned in video
RAM.
v2:
* pin cursor BOs to current location
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-8-tzimmermann@suse.de
Another explicit lock operation of a GEM VRAM BO is located in mgag200's
framebuffer update code. Instead of locking the BO, we pin it to wherever
it is.
v2:
* update with pin flag of 0
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-7-tzimmermann@suse.de
Based on 1 normalized pattern(s):
this file is subject to the terms and conditions of the gnu general
public license version 2 see the file copying in the main directory
of this archive for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 9 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081036.888539456@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cross-subsystem Changes:
- Fix device tree bindings in drm-misc-next after a botched merge.
Core Changes:
- Docbook fix for drm_hdmi_infoframe_set_hdr_metadata.
Driver Changes:
- mediatek: Fix compiler warning after merging the HDR series.
- vc4: Rework binner bo handling.
-----BEGIN PGP SIGNATURE-----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=2K7c
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.3, try #2:
UAPI Changes:
- Add HDR source metadata property.
- Make drm.h compile on GNU/kFreeBSD by including stdint.h
- Clarify how the userspace reviewer has to review new kernel UAPI.
- Clarify that for using new UAPI, merging to drm-next or drm-misc-next should be enough.
Cross-subsystem Changes:
- video/hdmi: Add unpack function for DRM infoframes.
- Device tree bindings:
* Updating a property for Mali Midgard GPUs
* Updating a property for STM32 DSI panel
* Adding support for FriendlyELEC HD702E 800x1280 panel
* Adding support for Evervision VGG804821 800x480 5.0" WVGA TFT panel
* Adding support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT.
* Adding support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel
with resistive touch found on TI's AM335X-EVM.
* Adding support for EDT ETM0430G0DH6 480x272 panel.
- Add OSD101T2587-53TS driver with DT bindings.
- Add Samsung S6E63M0 panel driver with DT bindings.
- Add VXT VL050-8048NT-C01 800x480 panel with DT bindings.
- Dma-buf:
- Make mmap callback actually optional.
- Documentation updates.
- Fix debugfs refcount inbalance.
- Remove unused sync_dump function.
- Fix device tree bindings in drm-misc-next after a botched merge.
Core Changes:
- Add support for HDR infoframes and related EDID parsing.
- Remove prime sg_table caching, now done inside dma-buf.
- Add shiny new drm_gem_vram helpers for simple VRAM drivers;
with some fixes to the new API on top.
- Small fix to job cleanup without timeout handler.
- Documentation fixes to drm_fourcc.
- Replace lookups of drm_format with struct drm_format_info;
remove functions that become obsolete by this conversion.
- Remove double include in bridge/panel.c and some drivers.
- Remove drmP.h include from drm/edid and drm/dp.
- Fix null pointer deref in drm_fb_helper_hotplug_event().
- Remove most members from drm_fb_helper_crtc, only mode_set is kept.
- Remove race of fb helpers with userspace; only restore mode
when userspace is not master.
- Move legacy setup from drm_file.c to drm_legacy_misc.c
- Rework scheduler job destruction.
- drm/bus was removed, remove from TODO.
- Add __drm_atomic_helper_crtc_reset() to subclass crtc_state,
and convert some drivers to use it (conversion is not complete yet).
- Bump vblank timeout wait to 100 ms for atomic.
- Docbook fix for drm_hdmi_infoframe_set_hdr_metadata.
Driver Changes:
- sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS instead of definining manually.
- v3d: Small cleanups, adding support for compute shaders,
reservation/synchronization fixes and job management refactoring,
fixes MMU and debugfs.
- lima: Fix null pointer in irq handler on startup, set default timeout for scheduled jobs.
- stm/ltdc: Assorted fixes and adding FB modifier support.
- amdgpu: Avoid hw reset if guilty job was already signaled.
- virtio: Add seqno to fences, add trace events, use correct flags for fence allocation.
- Convert AST, bochs, mgag200, vboxvideo, hisilicon to the new drm_gem_vram API.
- sun6i_mipi_dsi: Support DSI GENERIC_SHORT_WRITE_2 transfers.
- bochs: Small fix to use PTR_RET_OR_ZERO and driver unload.
- gma500: header fixes
- cirrus: Remove unused files.
- mediatek: Fix compiler warning after merging the HDR series.
- vc4: Rework binner bo handling.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/052875a5-27ba-3832-60c2-193d950afdff@linux.intel.com
To align with the rest of DRM terminology, the GEM VRAM helpers now use
lock and unlock in places where reserve and unreserve where used before.
All callers have been adapted.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190521110831.20200-3-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The push-to-system function forces a buffer out of video RAM. This decision
should rather be made by the memory manager. By replacing the function with
calls to the kunmap and unpin functions, the buffer's memory becomes available,
but the buffer remains in VRAM until it's evicted by a pin operation.
This patch replaces the remaining instances of drm_gem_vram_push_to_system()
in ast and mgag200, and removes the function from DRM.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190521110831.20200-2-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
