When using the flip queue, due to the DMC vs. DSB register corruption
problem, we must not issue any register writes from the DSB after
unhalting the DMC. Currently we are doing just that by trying to
restore DSB_PMCTRL* back to a sane state from intel_dsb_finish().
Since the only place left that pokes at DSB_PMCTRL* is intel_dsb_chain()
we can just do DSB_PMCTRL_2/DSB_FORCE_DEWAKE reset in the same place.
The DSB_PMCTRL reset is trickier since we'd have to do it from the
chained DSB itself. But based on my earlier testing
DSB_PMCTRL/DSB_ENABLE_DEWAKE doesn't actually do anything if the DSB
isn't actually enabled, so we can omit the reset to keep things a bit
simpler. We do need to reset DSB_PMCTRL/DSB_ENABLE_DEWAKE before
tarting the DSB however, in case it was left enabled from a previous
use.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-6-ville.syrjala@linux.intel.com
Since the introduction of DSB chaining we no longer need the
DEwake tricks in intel_dsb_commit().
I also need to relocate the DSB_PMCTRL* writes out of
intel_dsb_finish() (due to the flip queue DMC vs. DSB register
corruption issues), and it'll be a bit more straightforward if
I don't have to worry about the non-chained DSB path anymore.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-5-ville.syrjala@linux.intel.com
Pull the magic 20 usec DSB execution deadline into
intel_dsb_arm_exec_time_us(), and also add its counterpart
for the non-arming register write section. For the non-arming
part we'll just throw in a random 80 usec for now so the total
is 100usec. The total exec time will be needed by the upcoming
flip queue code.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-4-ville.syrjala@linux.intel.com
If the free_post is not QW aligned we don't have to memset the
extra DW needed to make it so, as the only way that can happen
is via intel_dsb_reg_write_indexed() which already makes sure
the next DW is zeroed.
Not a big deal, but this is more consistent how all the other
stuff operates that puts instructions into the DSB buffer, and
we'll get a few more of those soon.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-2-ville.syrjala@linux.intel.com
When a device get wedged, it might be caused by a guilty application.
For userspace, knowing which task was involved can be useful for some
situations, like for implementing a policy, logs or for giving a chance
for the compositor to let the user know what task was involved in the
problem. This is an optional argument, when the task info is not
available, the PID and TASK string won't appear in the event string.
Sometimes just the PID isn't enough giving that the task might be already
dead by the time userspace will try to check what was this PID's name,
so to make the life easier also notify what's the task's name in the user
event.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-4-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
The call_mmap() function violates the existing convention in
include/linux/fs.h whereby invocations of virtual file system hooks is
performed by functions prefixed with vfs_xxx().
Correct this by renaming call_mmap() to vfs_mmap(). This also avoids
confusion as to the fact that f_op->mmap_prepare may be invoked here.
Also rename __call_mmap_prepare() function to vfs_mmap_prepare() and adjust
to accept a file parameter, this is useful later for nested file systems.
Finally, fix up the VMA userland tests and ensure the mmap_prepare -> mmap
shim is implemented there.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/8d389f4994fa736aa8f9172bef8533c10a9e9011.1750099179.git.lorenzo.stoakes@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
i915_pmu.c may fail to build with GCOV and AutoFDO enabled.
../drivers/gpu/drm/i915/i915_pmu.c:116:3: error: call to '__compiletime_assert_487' declared with 'error' attribute: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
116 | BUILD_BUG_ON(bit >
| ^
Here is a way to reproduce the issue:
$ git checkout v6.15
$ mkdir build
$ ./scripts/kconfig/merge_config.sh -O build -n -m <(cat <<EOF
CONFIG_DRM=y
CONFIG_PCI=y
CONFIG_DRM_I915=y
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_FS=y
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
CONFIG_AUTOFDO_CLANG=y
EOF
)
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
olddefconfig
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
CLANG_AUTOFDO_PROFILE=...PATH_TO_SOME_AFDO_PROFILE... \
drivers/gpu/drm/i915/i915_pmu.o
Although not super sure what happened, by reviewing the code, it should
depend on `__builtin_constant_p(bit)` directly instead of assuming
`__builtin_constant_p(config)` makes `bit` a builtin constant.
Also fix a nit, to reuse the `bit` local variable.
Fixes: a644fde77f ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250612083023.562585-1-tzungbi@kernel.org
(cherry picked from commit 686d773186)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Windows code seems to do some dodgy looking +/-1 adjustments
to some of the vertical timings. Not sure if that's correct
or not, but let's at least cross check some of the values
we got from the hardware to double check whether the GOP
did the same or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314150136.22564-3-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Protect the access to driver and timeline name which otherwise could be
freed as dma-fence exported is signalling fences.
This prepares the code for incoming dma-fence API changes which will start
asserting these accesses are done from a RCU locked section.
Now that the safe access is handled in the dma-fence API, the external
callers such as sync_file, and our internal code paths, we can drop the
similar protection from i915_fence_get_timeline_name().
This prepares the code for incoming dma-fence API changes which will start
asserting these accesses are done from a RCU locked section.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> # v1
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250610164226.10817-3-tvrtko.ursulin@igalia.com
Reading DPCD registers has side-effects and some of these can cause a
problem for instance during link training. Based on this it's better to
avoid the probing quirk done before each DPCD register read, limiting
this to the monitor which requires it. The only known problematic
monitor is an external SST sink, so keep the quirk disabled always for
eDP and MST sinks. Reenable the quirk after a hotplug event and after
resuming from a power state without hotplug support, until the
subsequent EDID based detection.
v2: Add a helper for determining the need/setting the probing. (Jani)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250609125556.109538-2-imre.deak@intel.com
i915_pmu.c may fail to build with GCOV and AutoFDO enabled.
../drivers/gpu/drm/i915/i915_pmu.c:116:3: error: call to '__compiletime_assert_487' declared with 'error' attribute: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
116 | BUILD_BUG_ON(bit >
| ^
Here is a way to reproduce the issue:
$ git checkout v6.15
$ mkdir build
$ ./scripts/kconfig/merge_config.sh -O build -n -m <(cat <<EOF
CONFIG_DRM=y
CONFIG_PCI=y
CONFIG_DRM_I915=y
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_FS=y
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
CONFIG_AUTOFDO_CLANG=y
EOF
)
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
olddefconfig
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
CLANG_AUTOFDO_PROFILE=...PATH_TO_SOME_AFDO_PROFILE... \
drivers/gpu/drm/i915/i915_pmu.o
Although not super sure what happened, by reviewing the code, it should
depend on `__builtin_constant_p(bit)` directly instead of assuming
`__builtin_constant_p(config)` makes `bit` a builtin constant.
Also fix a nit, to reuse the `bit` local variable.
Fixes: a644fde77f ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250612083023.562585-1-tzungbi@kernel.org
If the panel is enabled at probe, and we take over the hardware state,
the drm_panel prepared state will be out of sync. We'll need to notify
drm_panel framework about the state at probe, so it can in turn notify
the panel followers.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/a33e4fe5e9970aed9c4aef8c426c00a189149c32.1749199013.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Allocate and register a drm_panel so that drm_panel_followers can find
the panel. Pass the drm_connector::kdev device to drm_panel allocation
for matching. That's only available after drm_sysfs_connector_add(), so
we need to postpone the drm_panel allocation until .late_register()
hook.
The drm_panel framework is moving towards devm_drm_panel_alloc(). It
requires a wrapper struct, and struct intel_panel would be the natural
candidate. However, we can't postpone its allocation until
.late_register(), so we have to use __devm_drm_panel_alloc() directly
for now.
Call the drm_panel_prepare() and drm_panel_unprepare() functions for
ICL+ DSI, so that followers get notified of the panel power state
changes. This can later be expanded to VLV+ DSI and eDP.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/13d15c1414e65ffb21944d66e2820befdab54e98.1749199013.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add panel register/unregister functions, and handle backlight
register/unregister from there. This is in preparation for adding more
panel specific register/unregister functionality.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/b737d4bc8b91df630cd4db4648f3a3571989cfd8.1749199013.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
In the intel_connector_get_pipe() function, we check if
connection_mutex is held and generate our own WARN_ON if that's the
case. Instead of generating a non-standard warning for a mutex issue,
we should use the standard lockdep framework.
Change the function to use drm_modeset_lock_assert_held() instead.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250520095408.1310440-1-luciano.coelho@intel.com
We always pass 0 in the set argument of skl_scaler_get_filter_select()
calls, so the argument is unnecessary. Remove it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250520082917.1302665-3-luciano.coelho@intel.com
In dkl_phy_set_hip_idx(), we may try to shift a value negatively,
whose behavior is undefined. This can happen because we define
TC_PORT_NONE to -1, so theoretically tc_port could be -1. We will
then use tc_port to shift to the correct address of the specified
port, but if it's negative, anything can happen.
If this happens or tc_port exceeds I915_MAX_TC_PORTS, it's safer to
return with a warning than risk an invalid write.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250520082917.1302665-2-luciano.coelho@intel.com
Allocate struct drm_info dynamically, and convert the struct
drm_i915_private and struct xe_device dram_info member into a const
pointer. Move the struct definition to intel_dram.h, and keep it opaque
to everyone not needing it. This also removes the duplication of the
struct definition.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://lore.kernel.org/r/73625095157346ea0e8614108c9b369208e5df66.1748337870.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We'll want to start returning errors from intel_dram_detect(). As the
first step, add the return value and error handling, even if we still
only return 0.
Do no functional changes, but leave a comment about whether we should
bail out on dram detection failures.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://lore.kernel.org/r/be2c31c459fb95d8161b719d499403eea5ec17b7.1748337870.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a function to get the (const) pointer to struct dram_info, and use
that to obtain the pointer instead of poking at i915->dram_info
directly.
Clean up a couple of local variables while at it.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://lore.kernel.org/r/4174edf649e2f6805dab6fd6ce2ec10f4e5f2498.1748337870.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When configuring the HDMI PLL, calculations use DIV_ROUND_UP_ULL and
DIV_ROUND_DOWN_ULL macros, which internally rely on do_div. However, do_div
expects a 32-bit (u32) divisor, and at higher data rates, the divisor can
exceed this limit. This leads to incorrect division results and
ultimately misconfigured PLL values.
This fix replaces do_div calls with div64_base64 calls where diviser
can exceed u32 limit.
Fixes: 5947642004 ("drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250528064557.4172149-1-dibin.moolakadan.subrahmanian@intel.com
(cherry picked from commit ce924116e4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Convert SBI to use the intel_de_*() interface. This allows us to drop
the dependency in i915_drv.h while at it.
The fast timeout for the status wait drops from 100 us to 2 us on i915,
but that should be of no consequence. The slow timeout remains the same.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/146f9027f565feb827861f06c1ae218b378edd95.1748343520.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Future users of intel_de_wait_fw() need the final value. Just return it
for everyone using intel_wait_for_register_fw() and intel_de_wait_fw()
to avoid adding or using another set of specialized functions. There
aren't that many users for these anyway.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/f804b2fe85ad63389e74d82e4c97220e9275f170.1748343520.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Access the dma-fence internals via the previously added helpers.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250515095004.28318-6-tvrtko.ursulin@igalia.com
Bitmap updates for 6.16-rc1 include:
- dead code cleanups for cpumasks and nodemasks (me);
- fixed-width flavors of GENMASK() and BIT() (Vincent, Lucas and me);
- FIELD_MODIFY() helper (Luo);
- for_each_node_with_cpus() optimization (me);
- bitmap-str fixes (Andy).
-----BEGIN PGP SIGNATURE-----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=vATl
-----END PGP SIGNATURE-----
Merge tag 'bitmap-for-6.16-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- dead code cleanups for cpumasks and nodemasks (me)
- fixed-width flavors of GENMASK() and BIT() (Vincent, Lucas and me)
- FIELD_MODIFY() helper (Luo)
- for_each_node_with_cpus() optimization (me)
- bitmap-str fixes (Andy)
* tag 'bitmap-for-6.16-rc1' of https://github.com/norov/linux:
topology: make for_each_node_with_cpus() O(N)
bitfield: Add FIELD_MODIFY() helper
bitmap-str: Add missing header(s)
bitmap-str: Get rid of 'extern' for function prototypes
build_bug.h: more user friendly error messages in BUILD_BUG_ON_ZERO()
test_bits: add tests for BIT_U*()
test_bits: add tests for GENMASK_U*()
drm/i915: Convert REG_GENMASK*() to fixed-width GENMASK_U*()
bits: introduce fixed-type BIT_U*()
bits: introduce fixed-type GENMASK_U*()
bits: add comments and newlines to #if, #else and #endif directives
cpumask: drop cpumask_assign_cpu()
riscv: switch set_icache_stale_mask() to using non-atomic assign_cpu()
cpumask: add non-atomic __assign_cpu()
nodemask: drop nodes_shift
When configuring the HDMI PLL, calculations use DIV_ROUND_UP_ULL and
DIV_ROUND_DOWN_ULL macros, which internally rely on do_div. However, do_div
expects a 32-bit (u32) divisor, and at higher data rates, the divisor can
exceed this limit. This leads to incorrect division results and
ultimately misconfigured PLL values.
This fix replaces do_div calls with div64_base64 calls where diviser
can exceed u32 limit.
Fixes: 5947642004 ("drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250528064557.4172149-1-dibin.moolakadan.subrahmanian@intel.com
There is a rare race condition when preparing for a reset where
guc_lrc_desc_unpin() could be in the process of deregistering a context
while a different thread is scrubbing outstanding contexts and it alters
the context state and does a wakeref put. Then, if there is a failure
with deregister_context(), a second wakeref put could occur. As a result
the wakeref count could drop below 0 and fail an INTEL_WAKEREF_BUG_ON()
check.
Therefore if there is a failure with deregister_context(), undo the
context state changes and do a wakeref put only if the context was set
to be destroyed earlier.
v2: Expand comment to better explain change. (Daniele)
v3: Removed addition to the original comment. (Daniele)
Fixes: 2f2cc53b5f ("drm/i915/guc: Close deregister-context race against CT-loss")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Mousumi Jana <mousumi.jana@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250528230551.1855177-1-jesus.narvaez@intel.com
(cherry picked from commit f36a75aba1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When sending a H2G message where a reply is expected in
guc_submission_send_busy_loop(), outstanding_submission_g2h is
incremented before the send. However, if there is an error sending the
message, outstanding_submission_g2h is decremented without checking if a
reply is expected.
Therefore, check if reply is expected when there is a failure before
decrementing outstanding_submission_g2h.
Fixes: 2f2cc53b5f ("drm/i915/guc: Close deregister-context race against CT-loss")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Mousumi Jana <mousumi.jana@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250514225224.4142684-1-jesus.narvaez@intel.com
(cherry picked from commit a6a26786f2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
simplifies the act of creating a pte which addresses the first page in a
folio and reduces the amount of plumbing which architecture must
implement to provide this.
- The 8 patch series "Misc folio patches for 6.16" from Matthew Wilcox
is a shower of largely unrelated folio infrastructure changes which
clean things up and better prepare us for future work.
- The 3 patch series "memory,x86,acpi: hotplug memory alignment
advisement" from Gregory Price adds early-init code to prevent x86 from
leaving physical memory unused when physical address regions are not
aligned to memory block size.
- The 2 patch series "mm/compaction: allow more aggressive proactive
compaction" from Michal Clapinski provides some tuning of the (sadly,
hard-coded (more sadly, not auto-tuned)) thresholds for our invokation
of proactive compaction. In a simple test case, the reduction of a guest
VM's memory consumption was dramatic.
- The 8 patch series "Minor cleanups and improvements to swap freeing
code" from Kemeng Shi provides some code cleaups and a small efficiency
improvement to this part of our swap handling code.
- The 6 patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API"
from Dmitry Levin adds the ability for a ptracer to modify syscalls
arguments. At this time we can alter only "system call information that
are used by strace system call tampering, namely, syscall number,
syscall arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- The 3 patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report
guard regions" from Andrei Vagin extends the info returned by the
PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more
efficiently get at the info about guard regions.
- The 2 patch series "Fix parameter passed to page_mapcount_is_type()"
from Gavin Shan implements that fix. No runtime effect is expected
because validate_page_before_insert() happens to fix up this error.
- The 3 patch series "kernel/events/uprobes: uprobe_write_opcode()
rewrite" from David Hildenbrand basically brings uprobe text poking into
the current decade. Remove a bunch of hand-rolled implementation in
favor of using more current facilities.
- The 3 patch series "mm/ptdump: Drop assumption that pxd_val() is u64"
from Anshuman Khandual provides enhancements and generalizations to the
pte dumping code. This might be needed when 128-bit Page Table
Descriptors are enabled for ARM.
- The 12 patch series "Always call constructor for kernel page tables"
from Kevin Brodsky "ensures that the ctor/dtor is always called for
kernel pgtables, as it already is for user pgtables". This permits the
addition of more functionality such as "insert hooks to protect page
tables". This change does result in various architectures performing
unnecesary work, but this is fixed up where it is anticipated to occur.
- The 9 patch series "Rust support for mm_struct, vm_area_struct, and
mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM
structures.
- The 3 patch series "fix incorrectly disallowed anonymous VMA merges"
from Lorenzo Stoakes takes advantage of some VMA merging opportunities
which we've been missing for 15 years.
- The 4 patch series "mm/madvise: batch tlb flushes for MADV_DONTNEED
and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB
flushing. Instead of flushing each address range in the provided iovec,
we batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- The 6 patch series "Track node vacancy to reduce worst case allocation
counts" from Sidhartha Kumar makes the maple tree smarter about its node
preallocation. stress-ng mmap performance increased by single-digit
percentages and the amount of unnecessarily preallocated memory was
dramaticelly reduced.
- The 3 patch series "mm/gup: Minor fix, cleanup and improvements" from
Baoquan He removes a few unnecessary things which Baoquan noted when
reading the code.
- The 3 patch series ""Enhance sysfs handling for memory hotplug in
weighted interleave" from Rakie Kim "enhances the weighted interleave
policy in the memory management subsystem by improving sysfs handling,
fixing memory leaks, and introducing dynamic sysfs updates for memory
hotplug support". Fixes things on error paths which we are unlikely to
hit.
- The 7 patch series "mm/damon: auto-tune DAMOS for NUMA setups
including tiered memory" from SeongJae Park introduces new DAMOS quota
goal metrics which eliminate the manual tuning which is required when
utilizing DAMON for memory tiering.
- The 5 patch series "mm/vmalloc.c: code cleanup and improvements" from
Baoquan He provides cleanups and small efficiency improvements which
Baoquan found via code inspection.
- The 2 patch series "vmscan: enforce mems_effective during demotion"
from Gregory Price "changes reclaim to respect cpuset.mems_effective
during demotion when possible". because "presently, reclaim explicitly
ignores cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated." "This is useful for isolating workloads on a
multi-tenant system from certain classes of memory more consistently."
- The 2 patch series ""Clean up split_huge_pmd_locked() and remove
unnecessary folio pointers" from Gavin Guo provides minor cleanups and
efficiency gains in in the huge page splitting and migrating code.
- The 3 patch series "Use kmem_cache for memcg alloc" from Huan Yang
creates a slab cache for `struct mem_cgroup', yielding improved memory
utilization.
- The 4 patch series "add max arg to swappiness in memory.reclaim and
lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness="
argument for memory.reclaim MGLRU's lru_gen. This directs proactive
reclaim to reclaim from only anon folios rather than file-backed folios.
- The 17 patch series "kexec: introduce Kexec HandOver (KHO)" from Mike
Rapoport is the first step on the path to permitting the kernel to
maintain existing VMs while replacing the host kernel via file-based
kexec. At this time only memblock's reserve_mem is preserved.
- The 7 patch series "mm: Introduce for_each_valid_pfn()" from David
Woodhouse provides and uses a smarter way of looping over a pfn range.
By skipping ranges of invalid pfns.
- The 2 patch series "sched/numa: Skip VMA scanning on memory pinned to
one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless
VMA scanning when a task is pinned a single NUMA mode. Dramatic
performance benefits were seen in some real world cases.
- The 2 patch series "JFS: Implement migrate_folio for
jfs_metapage_aops" from Shivank Garg addresses a warning which occurs
during memory compaction when using JFS.
- The 4 patch series "move all VMA allocation, freeing and duplication
logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c
into the more appropriate mm/vma.c.
- The 6 patch series "mm, swap: clean up swap cache mapping helper" from
Kairui Song provides code consolidation and cleanups related to the
folio_index() function.
- The 2 patch series "mm/gup: Cleanup memfd_pin_folios()" from Vishal
Moola does that.
- The 8 patch series "memcg: Fix test_memcg_min/low test failures" from
Waiman Long addresses some bogus failures which are being reported by
the test_memcontrol selftest.
- The 3 patch series "eliminate mmap() retry merge, add .mmap_prepare
hook" from Lorenzo Stoakes commences the deprecation of
file_operations.mmap() in favor of the new
file_operations.mmap_prepare(). The latter is more restrictive and
prevents drivers from messing with things in ways which, amongst other
problems, may defeat VMA merging.
- The 4 patch series "memcg: decouple memcg and objcg stocks"" from
Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's
one. This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- The 6 patch series "mm/damon: minor fixups and improvements for code,
tests, and documents" from SeongJae Park is "yet another batch of
miscellaneous DAMON changes. Fix and improve minor problems in code,
tests and documents."
- The 7 patch series "memcg: make memcg stats irq safe" from Shakeel
Butt converts memcg stats to be irq safe. Another step along the way to
making memcg charging and stats updates NMI-safe, a BPF requirement.
- The 4 patch series "Let unmap_hugepage_range() and several related
functions take folio instead of page" from Fan Ni provides folio
conversions in the hugetlb code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDt5qgAKCRDdBJ7gKXxA
ju6XAP9nTiSfRz8Cz1n5LJZpFKEGzLpSihCYyR6P3o1L9oe3mwEAlZ5+XAwk2I5x
Qqb/UGMEpilyre1PayQqOnct3aSL9Ao=
=tYYm
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
There is a rare race condition when preparing for a reset where
guc_lrc_desc_unpin() could be in the process of deregistering a context
while a different thread is scrubbing outstanding contexts and it alters
the context state and does a wakeref put. Then, if there is a failure
with deregister_context(), a second wakeref put could occur. As a result
the wakeref count could drop below 0 and fail an INTEL_WAKEREF_BUG_ON()
check.
Therefore if there is a failure with deregister_context(), undo the
context state changes and do a wakeref put only if the context was set
to be destroyed earlier.
v2: Expand comment to better explain change. (Daniele)
v3: Removed addition to the original comment. (Daniele)
Fixes: 2f2cc53b5f ("drm/i915/guc: Close deregister-context race against CT-loss")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Mousumi Jana <mousumi.jana@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250528230551.1855177-1-jesus.narvaez@intel.com
Add function to configre LFPS sending for Panel Replay according to link
training sequence in HAS document.
This assumes we are using AUX Less always if it's supported by the sink and
the source.
v2:
- drop HAS reference
- replay kerneldoc comment with a generic comment
- check display version in intel_lnl_mac_transmit_lfps
Bspec: 68849
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250526120512.1702815-11-jouni.hogander@intel.com
It is specified in Bspec where port alpm configuration is supposed to be
performed. Change accordingly.
v2:
- drop HAS reference
- ensure PORT_ALPM registers are not writen on older platform
Bspec: 68849
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250526120512.1702815-9-jouni.hogander@intel.com
we need to know if AUXLess ALPM is used when preparing for link
training. Add new interface for this and use it in existing code where
possible.
v2: remove kerneldoc comment
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250526120512.1702815-8-jouni.hogander@intel.com
Currently we spread ugly PSR details into ALPM code to check if AUXLess
ALPM is needed. Prepare to hide these details to PSR code by adding new
interface for checking if AUXLess ALPM is needed.
v2: remove kerneldoc comment
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250526120512.1702815-7-jouni.hogander@intel.com
PR_ALPM_CTL register contains configurations related to Adaptive sync
sdp. Configure these if Adaptive Sync SDP is supported.
v2: avoid using hardcoded indices
Bspec: 71014
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250526120512.1702815-6-jouni.hogander@intel.com
There are several Panel Replay capability register in DPCD. Read them
all for later use.
v2:
- avoid using hardcoded indices
- read all Panel Replay capability registers
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250526120512.1702815-4-jouni.hogander@intel.com
When sending a H2G message where a reply is expected in
guc_submission_send_busy_loop(), outstanding_submission_g2h is
incremented before the send. However, if there is an error sending the
message, outstanding_submission_g2h is decremented without checking if a
reply is expected.
Therefore, check if reply is expected when there is a failure before
decrementing outstanding_submission_g2h.
Fixes: 2f2cc53b5f ("drm/i915/guc: Close deregister-context race against CT-loss")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Mousumi Jana <mousumi.jana@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250514225224.4142684-1-jesus.narvaez@intel.com
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----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=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
Need to pull in a67221b5eb ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
- The most significant change is the replacement of the old kernel-doc
script (a monstrous collection of Perl regexes that predates the Git era)
with a Python reimplementation. That, too, is a horrifying collection of
regexes, but in a much cleaner and more maintainable structure that
integrates far better with the Sphinx build system.
This change has been in linux-next for the full 6.15 cycle; the small
number of problems that turned up have been addressed, seemingly to
everybody's satisfaction. The Perl kernel-doc script remains in tree (as
scripts/kernel-doc.pl) and can be used with a command-line option if need
be. Unless some reason to keep it around materializes, it will probably
go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmg0j/IPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yu7sH/1w2LtO8XB/KTRNmuz3tV6KzGtDvQVwqgxB2
X8bbeJlBtYenvuak66RjCfucOh7Y8Ni3UN0G2BGa67KBAxmZEYc6u+IF4SrJUg5g
DuS6+ZXgqV4TrjWMRof5LtPS8KbNJLGnqgxSVdEPSBV0jJ13r3gb3/e7X06iNAKR
X4Nq+h5aa1tCwZTkPOSHHQn4qm3Tb1LQreDSn8gnBn6e8nVJIakNlwaVYkClhI9B
byvItInv32LPAXPDkcEWITvLNUTiMobTyfBYHOD6i3nImQ+j4ZiMMmOUjiB+0jDO
UQDvoUa46ipXkLBsBOrYEkM/iKXBawMwTa3CcudxR4scvVgATJs=
=BQ9X
-----END PGP SIGNATURE-----
Merge tag 'docs-6.16' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A moderately busy cycle for documentation this time around:
- The most significant change is the replacement of the old
kernel-doc script (a monstrous collection of Perl regexes that
predates the Git era) with a Python reimplementation. That, too, is
a horrifying collection of regexes, but in a much cleaner and more
maintainable structure that integrates far better with the Sphinx
build system.
This change has been in linux-next for the full 6.15 cycle; the
small number of problems that turned up have been addressed,
seemingly to everybody's satisfaction. The Perl kernel-doc script
remains in tree (as scripts/kernel-doc.pl) and can be used with a
command-line option if need be. Unless some reason to keep it
around materializes, it will probably go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc"
* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
Docs: doc-guide: update sphinx.rst Sphinx version number
docs: doc-guide: clarify latest theme usage
Documentation/scheduler: Fix typo in sched-stats domain field description
scripts: kernel-doc: prevent a KeyError when checking output
docs: kerneldoc.py: simplify exception handling logic
MAINTAINERS: update linux-doc entry to cover new Python scripts
docs: align with scripts/syscall.tbl migration
Documentation: NTB: Fix typo
Documentation: ioctl-number: Update table intro
docs: conf.py: drop backward support for old Sphinx versions
Docs: driver-api/basics: add kobject_event interfaces
Docs: relay: editing cleanups
docs: fix "incase" typo in coresight/panic.rst
Fix spelling error for 'parallel'
docs: admin-guide: fix typos in reporting-issues.rst
docs: dmaengine: add explanation for DMA_ASYNC_TX capability
Documentation: leds: improve readibility of multicolor doc
docs: fix typo in firmware-related section
docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
Documentation: ioctl-number: Update outdated submission info
...
Changes
-------
* Reduce open-coded use of ratelimit_state structure fields.
* Convert the ->missed field to atomic_t.
* Count misses that are due to lock contention.
* Eliminate jiffies=0 special case.
* Reduce ___ratelimit() false-positive rate limiting (Petr Mladek).
* Allow zero ->burst to hard-disable rate limiting.
* Optimize away atomic operations when a miss is guaranteed.
* Warn if ->interval or ->burst are negative (Petr Mladek).
* Simplify the resulting code.
A smoke test and stress test have been created, but they are not yet ready
for mainline. With luck, we will offer them for the v6.17 merge window.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmgzWdgTHHBhdWxtY2tA
a2VybmVsLm9yZwAKCRCevxLzctn7jBnZD/wKD+5f8qwEuaib901yLb/s4ZkS3Aly
mcPLAcTSFc7jp3c188V2qPAAgobQW+NnOLZ/TuB34tvS/Ngm/Yo1EPiHD2AXPzfY
FPlgmjvOQQQo9dfA1PNOegh/aKYhMJrho85cilcM1TojuSSVbo1lG1FbuvqMJ9Ub
jPHRB6KaFDnhwJkWHJ4Fjl1z1TQcyxjrBoswEcMCKapNqrm6IiXLvw03Nme3wa7F
tr30xue5GV/FyHMa14g/8GSpZ88Lr5VGsOoC0wz2KhfMsZcFRkmslgm8mxHawwXj
MbQaW7Th+fD7H0pC/lbHIiKaXvizYbQCPXr4qf5gfqNf4R/BHE1QdSTmP45kjEXO
CmZEwwVx8cVdyoY9N9udDhNZly/U83G3F1n38jdM2SCPjn3F8BAanZRwakLEvmCC
XUQ0bvzQvJl0LM5ktyaaMZdWf3p6uah7otryCPdsA5V7BFgyx5ZHniXY6v1JgfhX
2nmYRO3vEoQ39Z+vPtu7DvS64oe/aYgkSIoG68rKhSb4S+nIdIZ8zwB1af4Nkk8e
YZwlwjIRw+RCu/QET4GXLE1tHQ031kWR/xG8nDnNGE3XCjnfRArAcdMZNDlc3U5k
GT1g8zOJR2jmlEvWUZwpmclc1yeHXTK1P9nOHmzhxw26eiXmY353PZcND9Ktnt/a
RH550D0vUqFM7A==
=ivk+
-----END PGP SIGNATURE-----
Merge tag 'ratelimit.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull rate-limit updates from Paul McKenney:
"lib/ratelimit: Reduce false-positive and silent misses:
- Reduce open-coded use of ratelimit_state structure fields.
- Convert the ->missed field to atomic_t.
- Count misses that are due to lock contention.
- Eliminate jiffies=0 special case.
- Reduce ___ratelimit() false-positive rate limiting (Petr Mladek).
- Allow zero ->burst to hard-disable rate limiting.
- Optimize away atomic operations when a miss is guaranteed.
- Warn if ->interval or ->burst are negative (Petr Mladek).
- Simplify the resulting code.
A smoke test and stress test have been created, but they are not yet
ready for mainline. With luck, we will offer them for the v6.17 merge
window"
* tag 'ratelimit.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
ratelimit: Drop redundant accesses to burst
ratelimit: Use nolock_ret restructuring to collapse common case code
ratelimit: Use nolock_ret label to collapse lock-failure code
ratelimit: Use nolock_ret label to save a couple of lines of code
ratelimit: Simplify common-case exit path
ratelimit: Warn if ->interval or ->burst are negative
ratelimit: Avoid atomic decrement under lock if already rate-limited
ratelimit: Avoid atomic decrement if already rate-limited
ratelimit: Don't flush misses counter if RATELIMIT_MSG_ON_RELEASE
ratelimit: Force re-initialization when rate-limiting re-enabled
ratelimit: Allow zero ->burst to disable ratelimiting
ratelimit: Reduce ___ratelimit() false-positive rate limiting
ratelimit: Avoid jiffies=0 special case
ratelimit: Count misses due to lock contention
ratelimit: Convert the ->missed field to atomic_t
drm/amd/pm: Avoid open-coded use of ratelimit_state structure's internals
drm/i915: Avoid open-coded use of ratelimit_state structure's ->missed field
random: Avoid open-coded use of ratelimit_state structure's ->missed field
ratelimit: Create functions to handle ratelimit_state internals
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*() namespace
convention.
There are is another large converstion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next. The
conversion scripts will be run towards the end of the merge window and a
pull request sent once all conflict dependencies have been merged.
-----BEGIN PGP SIGNATURE-----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=FHGU
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"Another set of timer API cleanups:
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*()
namespace convention.
There is another large conversion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next.
The conversion scripts will be run towards the end of the merge window
and a pull request sent once all conflict dependencies have been
merged"
* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
timers: Rename init_timers() as timers_init()
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
timers: Rename __init_timer() as __timer_init()
timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
timers: Rename init_timer_key() as timer_init_key()
This reverts commit d6e0208196.
The IS_DGFX check was put in place because error capture of buffer
objects is expected to be broken on devices with VRAM.
Userspace fix[1] to the impacted media driver has been submitted, merged
and a new driver release is out as 25.2.3 where the capture flag is
dropped on DG1 thus unblocking the usage of media driver on DG1.
[1] 93c07d9b4b
Cc: stable@vger.kernel.org # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250522064127.24293-1-joonas.lahtinen@linux.intel.com
[Joonas: Update message to point out the merged userspace fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit d2dc30e0aa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The intel-media-driver is currently broken on DG1 because
it uses EXEC_CAPTURE with recovarable contexts. Relax the
check to allow that.
I've also submitted a fix for the intel-media-driver:
https://github.com/intel/media-driver/pull/1920
Cc: stable@vger.kernel.org # v6.0+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Testcase: igt/gem_exec_capture/capture-invisible
Fixes: 71b1669ea9 ("drm/i915/uapi: tweak error capture on recoverable contexts")
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411144313.11660-2-ville.syrjala@linux.intel.com
(cherry picked from commit d6e0208196)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This reverts commit d6e0208196.
The IS_DGFX check was put in place because error capture of buffer
objects is expected to be broken on devices with VRAM.
Userspace fix[1] to the impacted media driver has been submitted, merged
and a new driver release is out as 25.2.3 where the capture flag is
dropped on DG1 thus unblocking the usage of media driver on DG1.
[1] 93c07d9b4b
Cc: stable@vger.kernel.org # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250522064127.24293-1-joonas.lahtinen@linux.intel.com
[Joonas: Update message to point out the merged userspace fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Make i915->display pointer opaque to most of core i915 driver. Lots of
places now need explicit include of intel_display_core.h, or a more
specific header.
With this dependency broken, changes in display should cause radically
less recompilation of i915.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/b381b59acb7e4f600e0282935a68aedf77768109.1747907216.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Allocate struct intel_display dynamically in
intel_display_device_probe() and free in intel_display_device_remove().
v2: Remove duplicate intel_display_device_remove() on error path (Lucas)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/8cd526a177061cddf71db59bd0901bd1a24e77be.1747907216.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Boot code changes:
- A large series of changes to reorganize the x86 boot code into a better isolated
and easier to maintain base of PIC early startup code in arch/x86/boot/startup/,
by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86 boot code
reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y
(Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary (Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar)
- Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish()
(Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>
(Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko,
Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae,
Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse,
Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout,
Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta,
Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak,
Xin Li)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JgQo
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPTgAKCRCRxhvAZXjc
ovkTAP9tyN24Oo+koY/2UedYBxM54cW4BCCRsVmkzfr8NSVdwwD/dg+v6gS8+nyD
3jlR0Z/08UyMHapB7fnAuFxPXXc8oAo=
=e55o
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.writepage' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull final writepage conversion from Christian Brauner:
"This converts vboxfs from ->writepage() to ->writepages().
This was the last user of the ->writepage() method. So remove
->writepage() completely and all references to it"
* tag 'vfs-6.16-rc1.writepage' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Remove aops->writepage
mm: Remove swap_writepage() and shmem_writepage()
ttm: Call shmem_writeout() from ttm_backup_backup_page()
i915: Use writeback_iter()
shmem: Add shmem_writeout()
writeback: Remove writeback_use_writepage()
migrate: Remove call to ->writepage
vboxsf: Convert to writepages
9p: Add a migrate_folio method
Adjust the enabling/disabling steps of the DP audio SDP splitting
according to a recent Bspec update. This moves the enabling to the audio
codec enable sequence after the transcoder is enabled and disables SDP
splitting explicitly during the audio disable sequence.
Bspec requires waiting for a vblank event after the transcoder is
enabled and before SDP splitting is enabled. There is no need for an
explicit wait for this, since after the transcoder is enabled this
vblank event is guaranteed to have happened via a flip done wait (see
intel_atomic_commit_tail() -> drm_atomic_helper_wait_for_flip_done()).
The bspec update is for LNL+ only, but the HW team clarified that this
has been always the intended sequence on all platforms and bspec will be
updated everywhere accordingly.
The way SDP splitting was originally enabled matched the version of
bspec at that time. Adding here the Fixes: line still, since this
change fixes a FIFO underrun on PTL during output enabling when DSC is
enabled.
Bspec: 49283, 68943
Fixes: 8853750dba ("drm/i915: Enable SDP split for DP2.0")
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250520142219.1688401-1-imre.deak@intel.com
(cherry picked from commit 56764c845a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Do not schedule vblank worker for LUT update if the registers are
double buffered
v2: Do not schedule the worker at all (Ville)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-12-chaitanya.kumar.borah@intel.com
Since Double Buffered LUT registers can be written in active region
no need to preload them.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-11-chaitanya.kumar.borah@intel.com
Double Buffered LUT registers can be programmed in the active region.
This patch implements the MMIO path for it. Program the registers after
evading vblank. The HW latches on to the registers after delayed vblank.
It takes around 1024 cdclk cycles(~one scanline) for this.
Following assumptions have been made while making this change
- Current vblank evasion time is sufficient for programming
the LUT registers.
- Current guardband calculation would be sufficient for the HW
to latch on to the new values
v2: move loading LUTs to commit_pipe_post_planes() since a vblank
evasion failure for this is probably less drastic than
for plane programming. (Ville)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-10-chaitanya.kumar.borah@intel.com
With addition of double buffered GAMMA registers in PTL, we can now
program them in the active region. Use GOSUB instruction of DSB to
program them.
It is done in the following steps:
1. intel_color_prepare_commit()
- If the platform supports, prepare a dsb instance (dsb_color)
hooked to DSB0.
- Add all the register write instructions to dsb_color through
the load_lut() hook
- Do not add the vrr_send_push() logic to the buffer as it
should be taken care by dsb_commit instance of DSB0
- Finish preparation of the buffer by aligning it to 64 bit
2. intel_atomic_dsb_finish()
- Add the gosub instruction into the dsb_commit instance of DSB0
using intel_dsb_gosub()
- If needed, add the vrr_send_push() logic to dsb_commit after it
v2: Refactor code to simplify commit completion flow.
Add some helpers along the way (Ville)
v3: s/doubled/double and add display to commit message prefix (Uma)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-9-chaitanya.kumar.borah@intel.com
With double buffer gamma registers in the mix, we need not wait for
vblank to execute gamma writes through dsb. Before we implement
that s/dsb_color_vblank/dsb_color.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-8-chaitanya.kumar.borah@intel.com
DSB raises an interrupt when there is a nested GOSUB command or
illegal Head/Tail. Add support to log such errors in the DSB
interrupt handler.
v2: Enable support only in platforms that support this (Ville)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-7-chaitanya.kumar.borah@intel.com
A DSB buffer which will be used for GOSUB execution does not need
the DEWAKE mechanism but still need to be 64 bit aligned. Add helper
to finish preparation of a dsb buffer to be executed with GOSUB
instruction.
v2: Add a cacheline of noops at the end of GOSUB buffer (Ville)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-6-chaitanya.kumar.borah@intel.com
Add support for the new GOSUB DSB instruction (available on ptl+),
which instructs the DSB to jump to a different buffer, execute
the commands there, and then return execution to the next
instruction in the original buffer.
There are a few alignment related workarounds that need to
be dealt with when emitting GOSUB instruction.
v2: Right shift head and tail pointer passed to gosub command (chaitanya)
v3: Add macro for right shifting head/tail pointers (Animesh)
v4: Fix typo in commit message (Uma)
Add comments explaining why right shifting htp is needed (Animesh)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-5-chaitanya.kumar.borah@intel.com
Extract the code that calculates the DSB_HEAD/TAIL register
values into small helpers. We already have two copies of this,
and soon there will be a third.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-4-chaitanya.kumar.borah@intel.com
Extract the DSB tail alignment checks into helper. We already
have two uses of this, and soon we'll get a third.
v2: s/soo/soon in commit message (Animesh)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-3-chaitanya.kumar.borah@intel.com
Extract the code that alings the next instruction to the next
QW boundary into a small helper. I'll have some more uses for
this later.
Also explain why we don't have to zero out the extra DW.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250523062041.166468-2-chaitanya.kumar.borah@intel.com
Remove hard-coded strings by using the str_true_false() helper.
Signed-off-by: Yumeng Fang <fang.yumeng@zte.com.cn>
Signed-off-by: Yunjian Long <long.yunjian@zte.com.cn>
Link: https://lore.kernel.org/r/20250523141422844GEA-yzba-OvN0lZirDsS-@zte.com.cn
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add check for the return value of alloc_ordered_workqueue()
and alloc_workqueue(). Furthermore, if some allocations fail,
cleanup works are added to avoid potential memory leak problem.
Fixes: 40053823ba ("drm/i915/display: move modeset probe/remove functions to intel_display_driver.c")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20d3d096c6a4907636f8a1389b3b4dd753ca356e.1747397638.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit dcab7a228f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Due to a problem in the iTBT DP-in adapter's firmware the sink on a TBT
link may get disconnected inadvertently if the SINK_COUNT_ESI and the
DP_LINK_SERVICE_IRQ_VECTOR_ESI0 registers are read in a single AUX
transaction. Work around the issue by reading these registers in
separate transactions.
The issue affects MTL+ platforms and will be fixed in the DP-in adapter
firmware, however releasing that firmware fix may take some time and is
not guaranteed to be available for all systems. Based on this apply the
workaround on affected platforms.
See HSD #13013007775.
v2: Cc'ing Mika Westerberg.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13760
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14147
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250519133417.1469181-1-imre.deak@intel.com
(cherry picked from commit c3a48363cf)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The PTL XELPDP_PORT_CLOCK_CTL register XELPDP_DDI_CLOCK_SELECT field's
size is 5 bits vs. the earlier platforms where its size is 4 bits. Make
sure the field is read-out/programmed everywhere correctly, according to
the above.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: stable@vger.kernel.org # v6.13+
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250512142600.824347-1-imre.deak@intel.com
(cherry picked from commit d0bf684bd4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Adjust the enabling/disabling steps of the DP audio SDP splitting
according to a recent Bspec update. This moves the enabling to the audio
codec enable sequence after the transcoder is enabled and disables SDP
splitting explicitly during the audio disable sequence.
Bspec requires waiting for a vblank event after the transcoder is
enabled and before SDP splitting is enabled. There is no need for an
explicit wait for this, since after the transcoder is enabled this
vblank event is guaranteed to have happened via a flip done wait (see
intel_atomic_commit_tail() -> drm_atomic_helper_wait_for_flip_done()).
The bspec update is for LNL+ only, but the HW team clarified that this
has been always the intended sequence on all platforms and bspec will be
updated everywhere accordingly.
The way SDP splitting was originally enabled matched the version of
bspec at that time. Adding here the Fixes: line still, since this
change fixes a FIFO underrun on PTL during output enabling when DSC is
enabled.
Bspec: 49283, 68943
Fixes: 8853750dba ("drm/i915: Enable SDP split for DP2.0")
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250520142219.1688401-1-imre.deak@intel.com
Add check for the return value of alloc_ordered_workqueue()
and alloc_workqueue(). Furthermore, if some allocations fail,
cleanup works are added to avoid potential memory leak problem.
Fixes: 40053823ba ("drm/i915/display: move modeset probe/remove functions to intel_display_driver.c")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20d3d096c6a4907636f8a1389b3b4dd753ca356e.1747397638.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Due to a problem in the iTBT DP-in adapter's firmware the sink on a TBT
link may get disconnected inadvertently if the SINK_COUNT_ESI and the
DP_LINK_SERVICE_IRQ_VECTOR_ESI0 registers are read in a single AUX
transaction. Work around the issue by reading these registers in
separate transactions.
The issue affects MTL+ platforms and will be fixed in the DP-in adapter
firmware, however releasing that firmware fix may take some time and is
not guaranteed to be available for all systems. Based on this apply the
workaround on affected platforms.
See HSD #13013007775.
v2: Cc'ing Mika Westerberg.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13760
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14147
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250519133417.1469181-1-imre.deak@intel.com
Rename intel_update_active_dpll to intel_dpll_update_active in an
effort to have function names which are exported to start with
filenames they are exported from.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-15-suraj.kandpal@intel.com
Rename intel_compute_dpll to intel_dpll_compute in an
effort to make sure all function names that are exported have
the filename at start.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-14-suraj.kandpal@intel.com
Rename intel_<release/reserve>_dpll to
intel_dpll_<release/reserve> in an effort to keep names of
exported functions start with the filename.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-13-suraj.kandpal@intel.com
Rename intel_reference_dpll_crtc to intel_dpll_crtc_get in an
effort to have all the exported functions have the name start
with file name.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-12-suraj.kandpal@intel.com
Rename intel_unreference_dpll_crtc to intel_dpll_crtc_put
in an effort to keep names of exported functions start with the filename.
--v2
-Make the new name more sensible [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-11-suraj.kandpal@intel.com
Rename intel_[enable/disable]_dpll to intel_dpll_[enable/disable]
in an effort to make sure all functions that are exported
start with the filename.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-10-suraj.kandpal@intel.com
Rename crtc_get_shared_dpll to take into the individual PLL framework
which came in at DISPLAY_VER >= 14.
Also having shared dpll stuff also in intel_dpll.c is just confusing.
--v2
-Change naming to dpll_global to keep consistency with rest of the
naming
--v3
-Just use intel_dpll [Jani]
--v4
-Modify commit message [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-9-suraj.kandpal@intel.com
Rename functions to move away from using shared dpll in the dpll
framework as much as possible since dpll may not always be shared.
--v2
-Use intel_dpll_global instead of global_dpll [Jani]
--v3
-Just use intel_dpll [Jani]
--v4
-Drop the global from comments [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-8-suraj.kandpal@intel.com
Rename intel_shared_dpll to intel_dpll to represent both
shared and individual dplls. Since from MTL each PHY has it's
own PLL making the shared PLL naming a little outdated. In an
effort to make this framework accepting of future changes this
needs to be done.
--v2
-Use intel_dpll_global to make sure names start with the filename
[Jani/Ville]
-Explain the need of this rename [Jani]
--v3
-Just keep it intel_dpll [Jani]
--v4
-Fix comment [Jani]
-Use just num_dpll and dplls [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-7-suraj.kandpal@intel.com
Rename intel_shared_dpll_funcs to intel_dpll_funcs
since it needs to represent both shared and individual
dplls.
--v2
-Change intel_global_dpll to intel_dpll_global to be more
in line with the naming standard where the name should
start with the file name [Jani]
--v3
-Drop shared and global altogether [Jani]
--v4
-Keep declarations sorted [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-6-suraj.kandpal@intel.com
Rename the macro for_each_shared_dpll to for_each_dpll since
this loop will not necessarily be used for only shared
dpll in future.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-5-suraj.kandpal@intel.com
Rename intel_shared_dpll_state to just intel_dpll_state since it may
not necessarily store share dpll state info specially since
DISPLAY_VER >= 14 PLL's are not shared.
Also change the name of variables which may have been associated as
a shared_dpll.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-4-suraj.kandpal@intel.com
Rename intel_dpll_funcs to intel_dpll_global_funcs so that later
on intel_shared_dpll_funcs can be renamed to intel_dpll_funcs.
This is done to move away from the shared naming convention since
starting MTL dpll's are not shared among PHYs.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-3-suraj.kandpal@intel.com
Rename intel_dpll to intel_dpll_global so that intel_shared_dpll
can be renamed to intel_dpll in an effort to move away from the shared
naming convention.
Also intel_dpll according to it's comment tracks global dpll rather
than individual hence making more sense this gets changed.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-2-suraj.kandpal@intel.com
The register EMP_AS_SDP_TL (MTL) was introduced for configuring the
double buffering point and transmission line for all
HDMI2.1 Extended Metadata Packets (VT-EMP for VRR, CVT-EMP for DSC etc).
This was also intended to be configured for DP to HDMI2.1 PCON to
support VRR.
From BMG and LNL+ onwards, this register was extended to Display Port
Adaptive Sync SDP to have a common register to configure double
buffering point and transmission line for both HDMI EMPs and DP VRR related
packets.
Currently, we do not support VRR for either native HDMI or via PCON.
However we need to configure this for DP SDP case. As per the spec,
program the register to set Vsync start as the double buffering point
for DP AS SDP.
v2:
-Make the helper more readable. (Jani)
-Add more information in commit message and comment.
Bspec:70984, 71197
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250505033911.393628-1-ankit.k.nautiyal@intel.com
Bspec comment on PSR2_SU_STATUS:
"This register has been tied-off since DG2/ADL-P (it returns zeros only)
and it has been removed on Xe2_LPD."
v2: fix inversed logic
Bspec: 69889
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250516063019.2126702-1-jouni.hogander@intel.com
With all of the boundary conditions when streaming the commands B2B in our
validation (part of the reason we added the flush), the Flush effectively
serializes the transmission of each command enqueued within the command
dispatcher to one per V. Blank line which simplifies the behavior of the
High Speed Arbitration.
So, unless we absolutely have to burst these to the Sink, we should be
using the Pipeline Flush bit to serialize the commands.
Bspec: 19742, 50193
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14247
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Gareth Yu <gareth.yu@intel.com>
Link: https://lore.kernel.org/r/20250509092539.763389-1-gareth.yu@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Instead of hardcoding the event handler indices (for runtime
event handler enable/disable) we can simply look for the handler
with the appropriate event type. This isolates us from the firmware
details a bit better.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250512103358.15724-8-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Extract the helper to determine if the mmio reg+data are the
event handler register (DMC_EVT_CTL) for a specific event.
We'll have another use for this for runtime event handler
enable/disable.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250512103358.15724-7-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Move is_dmc_evt_ctl_reg() to a slightly earlier position in the file
so that we can reuse it in the pkgc workaround code. Also move
is_dmc_evt_htp_reg() just to keep the two together.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250512103358.15724-6-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Hook up PIPEDMC interrupts. We'll need these for:
- flip queue signalling
- GTT/ATS faults on LNL+
- unclaimed register access errors (supposedly that is what
the error interrupt indicated according to Windows code).
On LNL+ we get a new level of interrupts registers PIPEDMC_INTERRUPT*.
On earlier platforms we only have the INT_VECTOR field in the
PIPEDMC_STATUS registers, whose values are defined by the firmware.
For now we'll enable the interrupts on LNL+ only. For earlier platforms
it's not clear that there is any use for these interrupts, and some
ADL machines have exhibited spurious DE_PIPE interrupts with the
PIPEDMC interrupts unmasked/enabled. We can revisit enabling these
for earlier platforms in the future.
For some unknown reason LNL pipe B triggers the error interrupt
during the first DC state transition (subsequent transitions are
maybe OK?). No clear idea what's going on here yet, so keep the
error interrupt disabled for now.
Similar to DSB interrupt registers, the unused bits in
PIPEDMC_INTERRUPT* seem to act like randomg r/w bits (instead
of being hardwired to 0 like one would expect), and so we'll try
to avoid setting them so that we don't mistake them for real
interrupts.
v2: Only enable/unmask for LNL+
Keep the flip queue interrupt masked off for now since
we don't have a use for it yet
v3: Also keep the error interrupt masked off for now due to
LNL pipe B triggering it
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250514174257.8708-1-ville.syrjala@linux.intel.com
On LNL+ PIPEDMC faults are reported via PIPEDMC interrupts
instead of the direct DE_PIPE_* reporting used on earlier
platforms. Drop the relevant bits from the fault mask.
The bits are tied to zero on LNL, so there is no danger of
spurious fault interrupts even with an incorrect mask.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250512103358.15724-2-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
As the first step towards making struct intel_display an opaque pointer
in i915 and xe drivers, convert the struct drm_i915_private and struct
xe_device display members into pointers.
Initially, add temporary struct intel_display __display members, and
point display at it to avoid dynamic allocation. In the future, we can
drop this, and switch to dynamic allocation.
The conversion is done simply with sed:
sed -i 's/&\([a-zA-Z0-9_>.-]*\)\(dev_priv\|i915\|xe\)->display\([^.]\)/\1\2->display\3/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
sed -i 's/\(dev_priv\|i915\|xe\)->display\./\1->display->/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
With a couple of manual tweaks on top.
v2: Initialize i915->display also in selftest mock_gem_device()
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250507152254.2398934-1-jani.nikula@intel.com
- Stop writing ALPM registers when PSR is enabled
- Use the correct connector while computing the link BPP limit on MST
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aCWlWk5rTE7TH1pN@jlahtine-mobl
Dunno why we still have .require_force_probe=1 on DG1 after
all this time. I'm not aware of any real problems with DG1,
so get rid of the force_probe requirement.
Generally the difficulty with DG1 is that it requires a
4GiB BAR for the local memory, and that's not something
that works on every system.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411144313.11660-3-ville.syrjala@linux.intel.com
The intel-media-driver is currently broken on DG1 because
it uses EXEC_CAPTURE with recovarable contexts. Relax the
check to allow that.
I've also submitted a fix for the intel-media-driver:
https://github.com/intel/media-driver/pull/1920
Cc: stable@vger.kernel.org # v6.0+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Testcase: igt/gem_exec_capture/capture-invisible
Fixes: 71b1669ea9 ("drm/i915/uapi: tweak error capture on recoverable contexts")
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411144313.11660-2-ville.syrjala@linux.intel.com
drm-misc-next for v6.16-rc1:
Once more, with async flips.
UAPI Changes:
- Add IN_FORMATS_ASYNC property, use in i915.
Cross-subsystem Changes:
- Remove some unused debug code in dma-buf.
Core Changes:
Driver Changes:
- Add Novatek NT37801 panel.
- Allow submitting empty commands in amdxdna.
- Convert cirrus to use managed request_all_regions.
- Move Sitronix from tiny to their own place.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/23ded62c-6a62-4195-9c08-4dfb81eafd72@linux.intel.com
The PTL XELPDP_PORT_CLOCK_CTL register XELPDP_DDI_CLOCK_SELECT field's
size is 5 bits vs. the earlier platforms where its size is 4 bits. Make
sure the field is read-out/programmed everywhere correctly, according to
the above.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: stable@vger.kernel.org # v6.13+
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250512142600.824347-1-imre.deak@intel.com
Currently we are seeing these on PTL:
xe 0000:00:02.0: [drm] *ERROR* Timeout waiting for DDI BUF A to get active
These seem to be caused by writing ALPM registers while Panel Replay is
enabled.
Fix this by writing ALPM registers only when Panel Replay is about to be
enabled.
v4: improve comment on intel_psr_panel_replay_enable_sink call
v3: enable/disable ALPM from PSR code
Fixes: 172757acd6 ("drm/i915/lobf: Add lobf enablement in post plane update")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-3-jouni.hogander@intel.com
(cherry picked from commit a8eb102ce0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We want to enable sink ALPM from PSR code. Make intel_alpm_enable_sink
available for PSR.
v2: do not add kerneldoc comments
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-2-jouni.hogander@intel.com
(cherry picked from commit 2d27848876)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
All the PPS register users have been converted to struct
intel_display. The backward compat conversion to struct drm_i915_private
is no longer needed. Drop it, along with the include, and convert the
dev_priv macro parameter names to display while at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/4c23fd8dfcadefeeb52189045421084bcfd50d57.1747128495.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we are seeing these on PTL:
xe 0000:00:02.0: [drm] *ERROR* Timeout waiting for DDI BUF A to get active
These seem to be caused by writing ALPM registers while Panel Replay is
enabled.
Fix this by writing ALPM registers only when Panel Replay is about to be
enabled.
v4: improve comment on intel_psr_panel_replay_enable_sink call
v3: enable/disable ALPM from PSR code
Fixes: 172757acd6 ("drm/i915/lobf: Add lobf enablement in post plane update")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-3-jouni.hogander@intel.com
We want to enable sink ALPM from PSR code. Make intel_alpm_enable_sink
available for PSR.
v2: do not add kerneldoc comments
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-2-jouni.hogander@intel.com
Atm, on an MST link in DSC mode
intel_dp_compute_config_link_bpp_limits() calculates the maximum link
bpp limit using the MST root connector's DSC capabilities. That's not
correct in general: the decompression could be performed by a branch
device downstream of the root branch device or the sink itself.
Fix the above by passing to intel_dp_compute_config_link_bpp_limits()
the actual connector being modeset, containing the correct DSC
capabilities.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 1c5b72daff ("drm/i915/dp: Set the DSC link limits in intel_dp_compute_config_link_bpp_limits")
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-2-imre.deak@intel.com
(cherry picked from commit 266e2fcfe2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
With users both in i915 core and display, struct drm_device is the
common denominator for the VLV IOSF SB users. Also use drm_device for
the helpers on the display side to keep the static inlines as simple as
possible.
We can drop a number of dependencies on i915_drv.h with this.
v2,v3: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/c1d013ed88ce2e3e5bdc15ce3bf01a3960b1e817.1747061743.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that all the VLV IOSF SB unit specific helper users are under
display, relocate the helpers themselves under display as
well. Resurrect the vlv_sideband.[ch] name for this. Make everything
except DPIO helpers static inlines, as their implementations are
trivial.
All of this considerably simplifies the xe compat header.
v2: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/e86c2498c9f1c1d30f8e83fa5f1c23526b87b9ab.1747061743.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We'll want to relocate the unit specific functions to display, making
them inaccessible to i915 core. As there aren't that many users in i915
core, we can just convert them to the generic VLV IOSF SB read/write
functions.
v2: Use BIT(unit) for get/put
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/3162c8768eeeba928bbc3d4aa2ddfc6a1030a451.1747061743.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rewrite the VLV IOSF SB unit specific helpers in terms of the new
generic read/write functions. They become even simpler than they were.
The DPIO get/put helpers need to get/put both DPIO units.
v2: get/put both DPIO units
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v1
Link: https://lore.kernel.org/r/df97dafa0f7b665e2078c392f0dc3edc59655b0a.1747061743.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Enable using a fractional (compressed) link bpp on MST links, if this is
supported and the link bpp is forced. Fractional link bpps will be
enabled by default as a follow-up change after testing this
functionality within a set of commonly used MST monitors and docks/hubs
which support it.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-13-imre.deak@intel.com
Add support for forcing the link bpp on a connector via a connector
debugfs entry. During reducing link bpps due to a link BW limit, keep
bpps close to their forced value.
Add the debugfs entry to all relevant connectors: all DP connectors and
on an FDI link CRT/SDVO/LVDS/HDMI connectors.
v2:
- Move adding the debugfs entries to this patch.
- Rename i915_force_link_bpp to intel_force_link_bpp. (Jani)
- Select the relevant connectors via platform checks. (Jani)
- Use for_each_new_intel_connector_in_state(). (Jani)
- Fix 64 bit division vs. 32 bit build when converting str to q4. (lkp)
- Avoid division and addition overflow when converting str to q4.
v3:
- Add TODO: to make the non-DSC min bpp value connector specific. (Ankit)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-12-imre.deak@intel.com
Export the function that can be used by a follow-up change to query the
minimum compressed link bpp supported by the HW.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-11-imre.deak@intel.com
Factor out helpers that can be used in a follow-up change to query the
minimum and maximum pipe bpp supported by the HW.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-10-imre.deak@intel.com
Add support for a fractional compressed link bpp on an MST link. Leave
the actual enabling of fractional bpps to a follow-up change.
While at it add an assert before the bpp loop, that the min and max bpps
are aligned to the bpp step. This should hold regardless of the non-DSC/DSC
or MST/UHBR-SST modes.
This keeps the mode validation and DSC->DPT BW specific maximum link
bpps as rounded-down integer values still, changing those to a
fractional value is left for later, add here TODO comments for them.
v2:
- Align the min/max bpp value to the bpp step.
- Assert that the min/max bpp values are aligned to the bpp step.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-9-imre.deak@intel.com
The maximum link bpp - determined by the link BW for instance - can be
fractional, handle this properly during computing the link bpp on SST.
This keeps the pipe joiner specific maximum link bpp as a rounded-down
integer value still, changing that to a fractional value is left for
later.
v2: Align the min/max bpp value to the bpp step.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-8-imre.deak@intel.com
Adjusting the compressed bpp range min/max limits in
intel_dp_dsc_nearest_valid_bpp() is unnecessary:
- The source/sink min/max values are enforced already by the
link_config_limits::min_bpp_x16/max_bpp_x16 values computed early in
intel_dp_compute_config_link_bpp_limits().
- The fixed set of valid bpps are enforced already - for all bpps in the
min .. max range by intel_dp_dsc_valid_compressed_bpp() called from
intel_dp_mtp_tu_compute_config().
The only thing needed is limiting max compressed bpp below the
uncompressed pipe bpp, do that one thing only instead of calling
intel_dp_dsc_nearest_valid_bpp().
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-7-imre.deak@intel.com
Check the BW requirement of a selected compressed bpp against the total
MST link BW early. This didn't cause a problem, since all the BW limits
within the MST topology are checked during the later MST topology BW
check. However it doesn't make sense to defer the total link BW check,
since for resolving a BW limit issue due to this later also (a) requires
selecting a pipe to reduce its bpp, ending up reducing the bpp for
another pipe, which is not ideal (b) requires recomputing the state for
all CRTC/stream's in the topology which may slow down the commit
considerably (especially when using fractional bpps).
Based on the above, check a stream bpp's BW requirement against the MST
link's total BW early.
Ideally drm_dp_atomic_find_time_slots() should check internally the
corresponding PBN/TU slot BW against the total link BW, returning an
error if the check fails, however that change would also affect other
drivers, so leaving this for a follow-up.
v2: Rephrase description of pipe selection/bpp reduction in commit
message. (Ankit)
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-6-imre.deak@intel.com
A follow up change will check a selected bpp's BW requirement in
intel_dp_mtp_tu_compute_config(), however that requires the total link
slot count to be up-to-date. The latter in turn depends on the channel
encoding and hence the link rate used, so it can be set after the
link rate used is selected.
This also allows simplifying mst_stream_update_slots(), do that as well,
moving the function definition before its use.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-5-imre.deak@intel.com
Atm TGL supports only a fixed set of valid DSC compressed bpps
(6,8,10,12,15), but this is not taken into account while looking for a
bpp in the minimum..maximum compressed bpp range.
This happened to work only by chance since atm from the above min..max
range it's always the maximum bpp that is selected, which is one of the
above valid bpps (see mst_stream_dsc_compute_link_config() ->
intel_dp_dsc_nearest_valid_bpp()). Before selecting a bpp however, the
bpp's BW requirement should be checked wrt. to the MST total link BW;
after doing that - in a follow-up change - the validity of any bpp in
the min..max range must be ensured before the bpp is selected, do that
here.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-4-imre.deak@intel.com
A follow-up change wants to skip invalid bpps in the bpp select loop of
a stream state computation. To allow for that, using the usual
'continue' statement in the loop, change the way the single-bpp range is
handled.
v2: Fix typo in commit message. (Ankit)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-3-imre.deak@intel.com
Atm, on an MST link in DSC mode
intel_dp_compute_config_link_bpp_limits() calculates the maximum link
bpp limit using the MST root connector's DSC capabilities. That's not
correct in general: the decompression could be performed by a branch
device downstream of the root branch device or the sink itself.
Fix the above by passing to intel_dp_compute_config_link_bpp_limits()
the actual connector being modeset, containing the correct DSC
capabilities.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 1c5b72daff ("drm/i915/dp: Set the DSC link limits in intel_dp_compute_config_link_bpp_limits")
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-2-imre.deak@intel.com
Due to changes in allocator, the size of the allocation for
contiguous region is not rounded up to a power-of-two and
instead allocated as is. Thus, change the part of test that
expected the allocation to fail.
Signed-off-by: Mikolaj Wasiak <mikolaj.wasiak@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/fptevdfbclvg2lbfuys5ibffbl2baouywkutnr7vdsy5tzcqfk@mpflwlh6jxfd
Right or wrong, HAS_GMCH() has become a display only thing. The last
three users outside of display are in irq code. Reorder the if ladders
to stop using HAS_GMCH().
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://lore.kernel.org/r/20250502120725.439800-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmgcsdUACgkQ+mJfZA7r
E8rYqAf/citknZ0aTAOw7+O8581v6/27BsmRYO8T2JvhHWr3RIOeowgyEQ9M3m6y
jBM5qIsGH0JOrDMVDjvuVlfm+JAPRxVABo3GXTpUIu94xszwco+5iQNnHBui0NrP
AnAauh/MZC6YKmTzNVBHW35N+JQJ9clmK6Rf5Bzb8pVP1bPRwRFSpgefHBeimRRY
qeQlqEVfvst5gkQiTe2b/5ydErPB7WfBY4WHGrgykBPt0+3t7Zln3Dqbdm9vB7+p
zEHXQNvX75KGFimUgCf7mU2Hoov0LI1/cazeG1dbv6gczXOUySwIKRIuqKNJ6XsG
PSV0X8Hc1ppL4Sp1Oe/WAdwE2k/xxw==
=rvsI
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-05-08' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
Async flip is not supported with Indexed 8 bit format as it depends on
LUT and can't be updated atomically.
Note: This may change the alignment for C8 framebuffers on some
platforms.
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-5-b93ef83076c5@intel.com
Hook up the newly added plane function pointer
format_mod_supported_async to populate the modifiers/formats supported
by asynchronous flips.
v5: Correct the if condition for modifier support check (Chaitanya)
v6: Replace uint32_t/uint64_t with u32/u64 (Jani)
v7: Move plannar check from intel_async_flip_check_hw() to
intel_plane_format_mod_supported_async() (Ville)
v8: In case of error print format/modifier (Chaitanya)
v9: Exclude C8 format as its not supported by hardware
v10: filter only planar formats
move changes in can_async_flip to new patch (Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-4-b93ef83076c5@intel.com
The function intel_plane_can_async_flip() checks for async supported
modifier, add format support check also in the same function.
Note: on ADL the surface base addr is required to be 16k aligned and if
not might generate DMAR and GGTT faults leading to glitches. This patch
changes the 16k alignment to 4k for planar formats.
v11: Move filtering Indexed 8bit to a separate patch (Ville)
v12: correct the commit msg and remove unwanted debug print (Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-3-b93ef83076c5@intel.com
Determining the SST/MST mode during state computation must be done based
on the output type stored in the CRTC state, which in turn is set once
based on the modeset connector's SST vs. MST type and will not change as
long as the connector is using the CRTC. OTOH the MST mode indicated by
the given connector's intel_dp::is_mst flag can change independently of
the above output type, based on what sink is at any moment plugged to
the connector.
Fix the state computation accordingly.
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: f6971d7427 ("drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4607
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250507151953.251846-1-imre.deak@intel.com
(cherry picked from commit 0f45696ddb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Driver Changes:
- Fix SLPC wait boosting reference counting to avoid getting stuck on non-boost
frequency on power saving profile on DG1/DG2 (Vinay)
- Add 20ms delay to engine reset for robustness on HSW (Nitin)
- Use proper sleeping functions for timeouts shorter than 20ms (Andi)
- Fix fence not released on early probe errors for HuC (Janusz)
- Remove const from struct i915_wa list allocation (Kees)
- Apply SPDX license format where missing and use single-line format (Andi)
- Whitespace fixes (Dan, Andi)
- Selftest improvements (Mikolaj, Badal, Sk,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aBxNYp0IviE23zy-@jlahtine-mobl
The i915_oa_stream_destroy() function directly accesses the
ratelimit_state structure's ->missed field, which works, but which also
makes it more difficult to change this field. Therefore, make use of
the ratelimit_state_get_miss() function instead of directly accessing
the ->missed field.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: <intel-gfx@lists.freedesktop.org>
Cc: <dri-devel@lists.freedesktop.org>
For newer platforms (post DG2) hardware intentionally stalls on
submisstion of concurrent submissions on RCS and CCS of different
address spaces. With this workaround GuC will never schedule such
conlicting contexts; preventing detection of a stall as a hang.
GuC specs recommend to enable this for all platforms starting from MTL
supporting CCS.
v2: Use existing macros for version check. (Jani)
v3: Reword explanation for clarity. Remove unneeded parens. Remove
accidental comment change. (Daniele)
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250502223924.94628-1-julia.filipchuk@intel.com
Determining the SST/MST mode during state computation must be done based
on the output type stored in the CRTC state, which in turn is set once
based on the modeset connector's SST vs. MST type and will not change as
long as the connector is using the CRTC. OTOH the MST mode indicated by
the given connector's intel_dp::is_mst flag can change independently of
the above output type, based on what sink is at any moment plugged to
the connector.
Fix the state computation accordingly.
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: f6971d7427 ("drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4607
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250507151953.251846-1-imre.deak@intel.com
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct i915_wa *". The returned type, while
technically matching, will be const qualified. As there is no general
way to remove const qualifiers, adjust the allocation type to match
the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250426061357.work.749-kees@kernel.org
Observe that i915->irq_lock is no longer used to protect anything
outside of display. Make it a display thing.
This allows us to remove the ugly #define irq_lock irq.lock hack from xe
compat header.
Note that this is slightly more subtle than it first looks. For i915,
there's no functional change here. The lock is moved. However, for xe,
we'll now have *two* locks, xe->irq.lock and display->irq.lock. These
should protect different things, though. Indeed, nesting in the past
would've lead to a deadlock because they were the same lock.
With the i915 references gone, we can make a handful more files
independent of i915_drv.h.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/6d8d2ce0f34a9c7361a5e2fcf96bb32a34c57e76.1746536745.git.jani.nikula@intel.com
[Jani: Fixed a comment while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Make the gt rps code and display irq code interact via
intel_display_rps.[ch], instead of direct access. Add no-op static
inline stubs for xe instead of having a separate build unit doing
nothing. All of this clarifies the interfaces between i915 core and
display.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/ef2a46dc8f30b72282494f54e98cb5fed7523b58.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
All users of vlv_display_irq_postinstall() outside of
intel_display_irq.c have a lock/unlock pair. Move the locking inside the
function. Add an unlocked variant for internal use, similar to the
_vlv_display_irq_reset() and vlv_display_irq_reset() functions.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/93ea785d2d9bdb4e18328aa42a00a492d9d783c0.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
As seen in some recent failures, SLPC num_waiters value is < 0.
This happens because the inc/dec are not balanced. We should skip
decrement for the same conditions as the increment. Currently, we
do that for power saving profile mode. This patch also ensures that
num_waiters is incremented in the case min_softlimit is at boost
freq. It ensures that we don't reduce the frequency while this request
is in flight.
v2: Add Fixes tags
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13598
Fixes: f864a29afc ("drm/i915/slpc: Optmize waitboost for SLPC")
Fixes: 4a82ceb04a ("drm/i915/slpc: Add sysfs for SLPC power profiles")
Cc: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Sk Anirban <sk.anirban@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250428183555.3250021-1-vinay.belgaumkar@intel.com
(cherry picked from commit d26e55085f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As per the WA, fbc stride need to be programmed always for bmg.
Display driver handles the need to program the fbc stride using
the override stride. So ensure that we always get the override
stride in case of bmg
v2: re-phrase the commit message.
Bspec: 74212
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://lore.kernel.org/r/20250428115554.116780-1-vinod.govindapillai@intel.com
The driver specific HDCP GSC code will eventually be part of the driver
cores rather than display. Remove the struct intel_display references
from them, and pass struct drm_device instead.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/bf9aa8e44e18eef41e3077a2966935b4e2649b62.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The opaque HDCP GSC context nicely abstracts the differences between
drivers. Pass that instead of struct drm_i915_private or struct
xe_device to intel_hdcp_gsc_msg_send(). We can store the driver specific
data in the context.
This lets us drop the dependency on i915_drv.h from
intel_hdcp_gsc_message.c.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/df1653212f9014e717701b017e78e0017884b870.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
