Use drm dp helper to enable backlight now that it has been modified
to set PANEL_LUMINANCE_CONTROL_ENABLE bit based on if capability
supports it and the driver wants it. Remove the dead code.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-14-suraj.kandpal@intel.com
Now that drm_edp_backlight init has been modified to take
into account the setup of lumininace based brightness manipulation
we can just use that.
--v2
-Fix commit message [Arun]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-12-suraj.kandpal@intel.com
Change the current_level argument type to u32 from u16
since it can now carry the value which it gets from
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-6-suraj.kandpal@intel.com
Add new argument to drm_edp_backlight_init which gives the
max_luminance which will be needed to set the max values for
backlight.
--v2
-Use pass only max luminance instead of luminance_range_info struct
[Arun]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-4-suraj.kandpal@intel.com
Add bool argument in drm_edp_backlight init to provide the drivers
option to choose if they want to use luminance values to
manipulate brightness.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-3-suraj.kandpal@intel.com
The following error has been reported sporadically by CI when a test
unbinds the i915 driver on a ring submission platform:
<4> [239.330153] ------------[ cut here ]------------
<4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count)
<4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330942] Call Trace:
<4> [239.330944] <TASK>
<4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915]
<4> [239.331202] i915_driver_release+0x86/0xa0 [i915]
<4> [239.331482] devm_drm_dev_init_release+0x61/0x90
<4> [239.331494] devm_action_release+0x15/0x30
<4> [239.331504] release_nodes+0x3d/0x120
<4> [239.331517] devres_release_all+0x96/0xd0
<4> [239.331533] device_unbind_cleanup+0x12/0x80
<4> [239.331543] device_release_driver_internal+0x23a/0x280
<4> [239.331550] ? bus_find_device+0xa5/0xe0
<4> [239.331563] device_driver_detach+0x14/0x20
...
<4> [357.719679] ---[ end trace 0000000000000000 ]---
If the test also unloads the i915 module then that's followed with:
<3> [357.787478] =============================================================================
<3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown()
<3> [357.788031] -----------------------------------------------------------------------------
<3> [357.788204] Object 0xffff888109e7f480 @offset=29824
<3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244
<4> [357.788994] i915_vma_instance+0xee/0xc10 [i915]
<4> [357.789290] init_status_page+0x7b/0x420 [i915]
<4> [357.789532] intel_engines_init+0x1d8/0x980 [i915]
<4> [357.789772] intel_gt_init+0x175/0x450 [i915]
<4> [357.790014] i915_gem_init+0x113/0x340 [i915]
<4> [357.790281] i915_driver_probe+0x847/0xed0 [i915]
<4> [357.790504] i915_pci_probe+0xe6/0x220 [i915]
...
Closer analysis of CI results history has revealed a dependency of the
error on a few IGT tests, namely:
- igt@api_intel_allocator@fork-simple-stress-signal,
- igt@api_intel_allocator@two-level-inception-interruptible,
- igt@gem_linear_blits@interruptible,
- igt@prime_mmap_coherency@ioctl-errors,
which invisibly trigger the issue, then exhibited with first driver unbind
attempt.
All of the above tests perform actions which are actively interrupted with
signals. Further debugging has allowed to narrow that scope down to
DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring
submission, in particular.
If successful then that function, or its execlists or GuC submission
equivalent, is supposed to be called only once per GEM context engine,
followed by raise of a flag that prevents the function from being called
again. The function is expected to unwind its internal errors itself, so
it may be safely called once more after it returns an error.
In case of ring submission, the function first gets a reference to the
engine's legacy timeline and then allocates a VMA. If the VMA allocation
fails, e.g. when i915_vma_instance() called from inside is interrupted
with a signal, then ring_context_alloc() fails, leaving the timeline held
referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the
timeline is got, and only that last one is put on successful completion.
As a consequence, the legacy timeline, with its underlying engine status
page's VMA object, is still held and not released on driver unbind.
Get the legacy timeline only after successful allocation of the context
engine's VMA.
v2: Add a note on other submission methods (Krzysztof Karas):
Both execlists and GuC submission use lrc_alloc() which seems free
from a similar issue.
Fixes: 75d0a7f31e ("drm/i915: Lift timeline into intel_context")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250611104352.1014011-2-janusz.krzysztofik@linux.intel.com
Currently, Ultrajoiner is supported only on Xe2_HPD.
Update the HAS_ULTRAJOINER macro to reflect the same.
v2: Clarify the commit message to specify platform. (Jani)
Bspec: 69556
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Link: https://lore.kernel.org/r/20250611053039.377695-1-ankit.k.nautiyal@intel.com
Commit 77ba0b8562 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct
intel_display") added a to_intel_display(connector) call to
vlv_dphy_param_init() but when vlv_dphy_param_init() gets called
the connector object has not been initialized yet, so this leads
to a NULL pointer deref:
BUG: kernel NULL pointer dereference, address: 000000000000000c
...
Hardware name: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.314 08/13/2015
RIP: 0010:vlv_dsi_init+0x4e6/0x1600 [i915]
...
Call Trace:
<TASK>
? intel_step_name+0x4be8/0x5c30 [i915]
intel_setup_outputs+0x2d6/0xbd0 [i915]
intel_display_driver_probe_nogem+0x13f/0x220 [i915]
i915_driver_probe+0x3d9/0xaf0 [i915]
Use to_intel_display(&intel_dsi->base) instead to fix this.
Fixes: 77ba0b8562 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct intel_display")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250626143317.101706-1-hansg@kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 0dc6bfb50a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest().
The __mock_request_alloc() function implements the
smoketest->request_alloc() function pointer. It was supposed to return
error pointers, but it propogates the NULL return from mock_request()
so in the event of a failure, it would lead to a NULL pointer
dereference.
To fix this, change the mock_request() function to return error pointers
and update all the callers to expect that.
Fixes: 52c0fdb25c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/685c1417.050a0220.696f5.5c05@mx.google.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 778fa8ad5f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Original rationale for those had been the reduced cost of mntput()
for the stuff that is mounted somewhere. Mount refcount increments and
decrements are frequent; what's worse, they tend to concentrate on the
same instances and cacheline pingpong is quite noticable.
As the result, mount refcounts are per-cpu; that allows a very cheap
increment. Plain decrement would be just as easy, but decrement-and-test
is anything but (we need to add the components up, with exclusion against
possible increment-from-zero, etc.).
Fortunately, there is a very common case where we can tell that decrement
won't be the final one - if the thing we are dropping is currently
mounted somewhere. We have an RCU delay between the removal from mount
tree and dropping the reference that used to pin it there, so we can
just take rcu_read_lock() and check if the victim is mounted somewhere.
If it is, we can go ahead and decrement without and further checks -
the reference we are dropping is not the last one. If it isn't, we
get all the fun with locking, carefully adding up components, etc.,
but the majority of refcount decrements end up taking the fast path.
There is a major exception, though - pipes and sockets. Those live
on the internal filesystems that are not going to be mounted anywhere.
They are not going to be _un_mounted, of course, so having to take the
slow path every time a pipe or socket gets closed is really obnoxious.
Solution had been to mark them as long-lived ones - essentially faking
"they are mounted somewhere" indicator.
With minor modification that works even for ones that do eventually get
dropped - all it takes is making sure we have an RCU delay between
clearing the "mounted somewhere" indicator and dropping the reference.
There are some additional twists (if you want to drop a dozen of such
internal mounts, you'd be better off with clearing the indicator on
all of them, doing an RCU delay once, then dropping the references),
but in the basic form it had been
* use kern_mount() if you want your internal mount to be
a long-term one.
* use kern_unmount() to undo that.
Unfortunately, the things did rot a bit during the mount API reshuffling.
In several cases we have lost the "fake the indicator" part; kern_unmount()
on the unmount side remained (it doesn't warn if you use it on a mount
without the indicator), but all benefits regaring mntput() cost had been
lost.
To get rid of that bitrot, let's add a new helper that would work
with fs_context-based API: fc_mount_longterm(). It's a counterpart
of fc_mount() that does, on success, mark its result as long-term.
It must be paired with kern_unmount() or equivalents.
Converted:
1) mqueue (it used to use kern_mount_data() and the umount side
is still as it used to be)
2) hugetlbfs (used to use kern_mount_data(), internal mount is
never unmounted in this one)
3) i915 gemfs (used to be kern_mount() + manual remount to set
options, still uses kern_unmount() on umount side)
4) v3d gemfs (copied from i915)
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Implement the driver side of Wa_18034343758, which is supposed to
prevent the DSB and DMC from accessing registers in parallel, and
thus potentially corrupting the registers due to a hardware issue
(which should be fixed in PTL-B0).
The w/a sequence goes as follows:
DMC starts the DSB
| \
DMC halts itself | DSB waits a while for DMC to have time to halt
. | DSB executes normally
. | DSB unhalts the DMC at the very end
. /
DMC resumes execution
v2: PTL-B0+ firmware no longer has the w/a since the hw got fixed
v3: Do the w/a on all PTL for now since we only have the A0 firmware
binaries which issues the halt instructions unconditionally
v4: PTL DMC binaries do in fact have the A0 vs. B0 split, so skip
the w/a on PTL-B0+
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-7-ville.syrjala@linux.intel.com
Support commits via the flip queue (as opposed to DSB or MMIO).
As it's somewhat unknown if we can actually use it is currently
gated behind the new use_flipq modparam, which defaults to disabled.
The implementation has a bunch of limitations that would need
real though to solve:
- disabled when PSR is used
- disabled when VRR is used
- color management updates not performed via the flip queue
v2: Don't use flip queue if there is no dmc
v3: Use intel_flipq_supported()
v3: Configure PKG_C_LATENCY appropriately
Ignore INT_VECTOR if there is a real PIPEDMC interrupt
(nothing in the hw appears to clear INT_VECTOR)
v4: Leave added_wake_time=0 when flip queue isn't used, to
avoid needleslly increasing pkg_c_latency on lnl/ptl due
to Wa_22020432604. This is a bit racy though...
Use IS_DISPLAY_VER()
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-6-ville.syrjala@linux.intel.com
Provide the lower level code for PIPEDMC based flip queue.
We'll use the so called semi-full flip queue mode where the
PIPEDMC will start the provided DSB on a scanline a little
ahead of the vblank. We need to program the triggering scanline
early enough so that the DSB has enough time to complete writing
all the double buffered registers before they get latched (at
start of vblank).
The firmware implements several queues:
- 3 "plane queues" which execute a single DSB per entry
- 1 "general queue" which can apparently execute 2 DSBs per entry
- 1 vestigial "fast queue" that replaced the "simple flip queue"
on ADL+, but this isn't supposed to be used due to issues.
But we only need a single plane queue really, and we won't actually
use it as a real queue because we don't allow queueing multiple commits
ahead of time. So the whole thing is perhaps useless. I suppose
there migth be some power saving benefits if we would get the flip
scheduled by userspace early and then could keep some hardware powered
off a bit longer until the DMC kicks off the flipq programming. But that
is pure speculation at this time and needs to be proven.
The code to hook up the flip queue into the actual atomic commit
path will follow later.
TODO: need to think how to do the "wait for DMC firmware load" nicely
need to think about VRR and PSR
etc.
v2: Don't write DMC_FQ_W2_PTS_CFG_SEL on pre-lnl
Don't oops at flipq init if there is no dmc
v3: Adapt to PTL+ flipq changes (different queue entry
layout, different trigger event, need VRR TG)
Use the actual CDCLK frequency
Ask the DSB code how long things are expected to take
v3: Adjust the cdclk rounding (docs are 100% vague, Windows
rounds like this)
Initialize some undocumented magic DMC variables on PTL
v4: Use PIPEDMC_FQ_STATUS for busy check (the busy bit in
PIPEDMC_FQ_CTRL is apparently gone on LNL+)
Based the preempt timeout on the max exec time
Preempt before disabling the flip queue
Order the PIPEDMC_SCANLINECMP* writes a bit more carefully
Fix some typos
v5: Try to deal with some clang-20 div-by-zero false positive (Nathan)
Add some docs (Jani)
Cc: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
epr
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-5-ville.syrjala@linux.intel.com
Add the register definitions for a bunch of flip queue related
PIPEDMC registers.
v2: The layout of flip queue entries changed on PTL
Bump the DMC_FQ_W2_PTS_CFG_SEL bitfields sizes (Uma)
Reduce the scanlines to 21 bits for now (Uma)
v3: Also define some undocumented DMC variables we need on PTL
v3: Drop PIPEDMC_FQ_CTRL_BUSY as it seems to no longer exist
on LNL+
Fix up some typos
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-4-ville.syrjala@linux.intel.com
The current PKG_C_LATENCY stuff looks busted in several ways:
- doesn't account for multiple pipes from different commits
correctly
- WM_LINETIME is in units of 0.125usec, PKG_C_LATENCY wants
units on 1 usec
- weird VRR state stuff being checked
- use of pointless RMW
Fix it all up. Note that it's still a bit unclear how all this
works, especially how the added_wake_time ties into the flipq
triggers in DMC, and how we need to sequence updates to
PKG_C_LATENCY when enabling/disabling pipes/etc. We may also
need to think what to about the WM1+ disabling and the related
PSR chicken bits when we can use PKG_C_LATENCY for early wake...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Commit 77ba0b8562 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct
intel_display") added a to_intel_display(connector) call to
vlv_dphy_param_init() but when vlv_dphy_param_init() gets called
the connector object has not been initialized yet, so this leads
to a NULL pointer deref:
BUG: kernel NULL pointer dereference, address: 000000000000000c
...
Hardware name: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.314 08/13/2015
RIP: 0010:vlv_dsi_init+0x4e6/0x1600 [i915]
...
Call Trace:
<TASK>
? intel_step_name+0x4be8/0x5c30 [i915]
intel_setup_outputs+0x2d6/0xbd0 [i915]
intel_display_driver_probe_nogem+0x13f/0x220 [i915]
i915_driver_probe+0x3d9/0xaf0 [i915]
Use to_intel_display(&intel_dsi->base) instead to fix this.
Fixes: 77ba0b8562 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct intel_display")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250626143317.101706-1-hansg@kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When the panic handler is called, configure the psr to send the full
framebuffer to the monitor, otherwise the panic screen is only
partially visible.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-12-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
On Alder Lake and later, it's not possible to disable tiling when DPT
is enabled.
So this commit implements 4-Tiling support, to still be able to draw
the panic screen.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-11-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
On Alder Lake and later, it's not possible to disable tiling when DPT
is enabled.
So this commit implements Y-Tiling support, to still be able to draw
the panic screen.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-10-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
This adds drm_panic support for a wide range of Intel GPU. I've
tested it only on 4 laptops, Haswell (with 128MB of eDRAM),
Comet Lake, Raptor Lake, and Lunar Lake.
For hardware using DPT, it's not possible to disable tiling, as you
will need to reconfigure the way the GPU is accessing the
framebuffer, so this will be handled by the following patches.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-9-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Implement both functions for i915 and xe, they prepare the work for
drm_panic support.
They both use kmap_try_from_panic(), and map one page at a time, to
write the panic screen on the framebuffer.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-8-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Encapsulate the struct intel_framebuffer into an xe_framebuffer
or i915_framebuffer, and allow to add specific fields for each
variant for the panic use-case.
This is particularly needed to have a struct xe_res_cursor available
to support drm panic on discrete GPU.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-7-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
drm_panic draws in linear framebuffer, so it's easier to re-use the
current framebuffer, and disable tiling in the panic handler, to show
the panic screen.
This assumes that the alignment restriction is always smaller in
linear than in tiled.
It also assumes that the linear framebuffer size is always smaller
than the tiled.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-5-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
drm_panic draws in linear framebuffer, so it's easier to re-use the
current framebuffer, and disable tiling in the panic handler, to show
the panic screen.
This assumes that the alignment restriction is always smaller in
linear than in tiled.
It also assumes that the linear framebuffer size is always smaller
than the tiled.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-4-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
The vaddr of the fbdev framebuffer is private to the struct
intel_fbdev, so this function is needed to access it for drm_panic.
Also the struct i915_vma is different between i915 and xe, so it
requires a few functions to access fbdev->vma->iomap.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-3-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest().
The __mock_request_alloc() function implements the
smoketest->request_alloc() function pointer. It was supposed to return
error pointers, but it propogates the NULL return from mock_request()
so in the event of a failure, it would lead to a NULL pointer
dereference.
To fix this, change the mock_request() function to return error pointers
and update all the callers to expect that.
Fixes: 52c0fdb25c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/685c1417.050a0220.696f5.5c05@mx.google.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Create a new unordered workqueue to be used by the display code
instead of relying on the i915 one. Then move all the unordered works
used in the display code to use this new queue.
Since this is an unordered workqueue, by definition there can't be any
order dependency with non-display works, so no extra care is needed
in regard to that.
This is part of the effort to isolate the display code from i915.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250620091632.1256135-1-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
With all the code touching struct intel_bw_state moved inside
intel_bw.c, we move the struct definition there too, and make the type
opaque. to_intel_bw_state() needs to be turned into a proper
function. All of this nicely reduces includes from intel_bw.h.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/743ba67e4e3c5dac4f5e58ab4d2357edea601d09.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add intel_dbuf_pmdemand_needs_update() helper to avoid looking at struct
intel_dbuf_state internals outside of skl_watermark.c.
With this, we can also move to_intel_dbuf_state(),
intel_atomic_get_old_dbuf_state(), and intel_atomic_get_new_dbuf_state()
inside skl_watermark.c.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/b493f259d0d3db047151fee18d7e801ad469fa88.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
While doing voltage swing for type-c phy
for DP 1.62 and HDMI write the
LOADGEN_SHARING_PMD_DISABLE bit to 1.
-v2: Update commit.
Add bspec[Suraj]
-v3: Move w/a before DKL_TX_PMD_LANE_SUS.
Use DKL_TX_DPCNTL2[Ville]
-v4: Use intel_encoder_is_dp and
intel_encoder_is_hdmi. [Suraj]
Bspec: 55359
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250625074911.194085-1-nemesa.garg@intel.com
Allocate and register drm_panel to allow the panel_follower framework to
detect the eDP panel and pass drm_connector::kdev device to drm_panel
allocation for matching.
Call drm_panel_prepare/unprepare in ddi_enable for eDP to allow the
followers to get notified of the panel power state changes.
Note: This is for eDP with DDI platforms only.
v2: remove backlight setup from panel_register (Jani)
v3: Updated the commit message (Jani)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250624-edp_panel-v3-1-e8197b6d9fde@intel.com
An earlier patch fixed a build failure with clang, but I still see the
same problem with some configurations using gcc:
drivers/gpu/drm/i915/i915_pmu.c: In function 'config_mask':
include/linux/compiler_types.h:568:38: error: call to '__compiletime_assert_462' declared with attribute error: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
drivers/gpu/drm/i915/i915_pmu.c:116:3: note: in expansion of macro 'BUILD_BUG_ON'
116 | BUILD_BUG_ON(bit >
As I understand it, the problem is that the function is not always fully
inlined, but the __builtin_constant_p() can still evaluate the argument
as being constant.
Marking it as __always_inline so far works for me in all configurations.
Fixes: a7137b1825 ("drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled")
Fixes: a644fde77f ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620111824.3395007-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ef69f9dd1c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The igt_vma_pin1() function has a rather high stack usage, which gets
in the way of reducing the default warning limit:
In file included from drivers/gpu/drm/i915/i915_vma.c:2285:
drivers/gpu/drm/i915/selftests/i915_vma.c:257:12: error: stack frame size (1288) exceeds limit (1280) in 'igt_vma_pin1' [-Werror,-Wframe-larger-than]
There are two things going on here:
- The on-stack modes[] array is really large itself and gets constructed
for every call, using around 1000 bytes itself depending on the configuration.
- The call to i915_vma_pin() gets inlined and adds another 200 bytes for
the i915_gem_ww_ctx structure since commit 7d1c2618ea ("drm/i915: Take
reservation lock around i915_vma_pin.")
The second one is easy enough to change, by moving the function into the
appropriate .c file. Since it is already large enough to not always be
inlined, this seems like a good idea regardless, reducing both the code size
and the internal stack usage of each of its 67 callers.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620113644.3844552-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
An earlier patch fixed a build failure with clang, but I still see the
same problem with some configurations using gcc:
drivers/gpu/drm/i915/i915_pmu.c: In function 'config_mask':
include/linux/compiler_types.h:568:38: error: call to '__compiletime_assert_462' declared with attribute error: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
drivers/gpu/drm/i915/i915_pmu.c:116:3: note: in expansion of macro 'BUILD_BUG_ON'
116 | BUILD_BUG_ON(bit >
As I understand it, the problem is that the function is not always fully
inlined, but the __builtin_constant_p() can still evaluate the argument
as being constant.
Marking it as __always_inline so far works for me in all configurations.
Fixes: 686d773186 ("drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled")
Fixes: a644fde77f ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620111824.3395007-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When KMSAN is enabled, this function causes has a rather excessive stack usage:
drivers/gpu/drm/i915/display/skl_watermark.c:2977:1: error: stack frame size (1432) exceeds limit (1408) in 'skl_compute_wm' [-Werror,-Wframe-larger-than]
This is apparently all caused by the varargs calls to drm_dbg_kms(). Inlining
this into skl_compute_wm() means that any function called by skl_compute_wm()
has its own stack on top of that.
Move the worst bit into a separate function marked as noinline_for_stack to
limit that to the one code path that actually needs it.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620113748.3869160-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From PTL we need to move to using HDCP2_STREAM_STATUS as a WARN_ON
to see if written content type info is not the same since
HDCP2_AUTH_STREAM is inaccessible to us now.
--v2
-Fix commit message [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250619113340.3379200-3-suraj.kandpal@intel.com
Do not use intel_de_read() inline in the WARN_ON functions.
While we are at it make the comparision for stream_type u8 to u8.
--v2
-Use REG_GENMASK() [Jani]
-USe REG_FIELD_GET() [Jani]
-Fix the WARN_ON() condition [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250619113340.3379200-2-suraj.kandpal@intel.com
With display code using the struct drm_device based pcode interface, we
can drop the old pcode compat interface.
We can also drop the __compat_uncore_to_tile() helper from
intel_uncore.h compat header.
Turns out a couple of headers depended on the intel_uncore.h include via
intel_pcode.h. Fix them.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/948016a031dcb2acef0c97071aac09fa49613e07.1750678991.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
With the struct drm_device based pcode interface in place in both i915
and xe, we can switch display code to use that, and ditch a number of
struct drm_i915_private uses. Also drop the dependency on i915_drv.h
from a couple of files.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/f948fad1b8208522e15140692c17cf493ef305d9.1750678991.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Only use the ms granularity wait in snb_pcode_write_timeout(), primarily
to better align with the xe driver, which also only has the millisecond
wait.
Use an arbitrary 250 us fast wait before the specified ms wait, and have
snb_pcode_write() default to 1 ms.
This means snb_pcode_write() and snb_pcode_write_timeout() will always
be sleeping functions. There should not be any atomic users for pcode
writes though, and any display code using pcode via xe has already been
non-atomic. The uncore wait will do a might_sleep() annotation that
should catch any problems.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/ba86280f53cea2d020308db35f1ecbd615d07d8a.1750678991.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Information parsed from the display EDID should be stored in display
info. Move HDR sink metadata there.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250519112900.1383997-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On TGL/derivatives the pipe DMC state is lost when PG1 is disabled,
and the main DMC does not restore any of it. This means the state will
also be lost during PSR+DC5/6. It seems safest to not even enable the
pipe DMC in that case (the main DMC does restore the pipe DMC enable
bit in PIPEDMC_CONTROL_A for some reason).
Since pipe DMC is only needed for "fast LACE" on these platforms we aren't
actually losing anything here. In the future if we do want to enable
"fast LACE" we'll just have to remember that it won't be compatible with
PSR.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-10-ville.syrjala@linux.intel.com
Currently we have some asserts to make sure the main DMC has been
loaded. Add similar asserts for the pipe DMCs. And we might as well
just check all the mmio registers the firmware has asked us to
initialize. That also covers the hardcoded SSP/HTP registers we were
checking for the main DMC.
TODO: Maybe always configure DMC_EVT_CTL_ENABLE the way the firmware
has it set so that we wouldn't need to special case in the assert?
v2: Also assert in intel_dmc_load_program()
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-8-ville.syrjala@linux.intel.com
On ADL/MTL pipe DMC MMIO state evidently lives in PG0. The main DMC
saves/restores it for pipes A/B, but for pipes C/D we have to do it
in the driver.
On PTL the situation is mostly the same, except the main DMC firmware
doesn't seem to have the PG0 save/restore code anymore, and instead the
hardware (or maybe Punit?) seems to take care of this job now. Pipes
C/D still need a manual restore by the driver.
On LNL I've been unable to lose any pipe DMC state, despite the main
DMC firmware still implementing the PG0 save/restore for pipes A/B.
Not sure what's going on here.
On DG2 I've also not been able to lose the pipe DMC state. DG2
doesn't support DC6, so that might explain part of it. But even
DC9 doesn't make a difference here. Perhaps PG0 is just always on
for DG2?
BMG I've not tested at all. The main DMC firmware does appaer to
implement the PG0 pipe A/B save/restore logic.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-7-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
On TGL/derivatives the entire pipe DMC state (program + MMIO) is
lost when PG1 is disabled, and the main DMC does not restore
any of it. Reload the state when enabling a pipe.
The other option would be to not load the pipe DMC at all since
it's only needed for "fast LACE" (which we don't use) on these
platforms. But let's keep it around just in case we ever decide
that "fast LACE" is something we want.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-6-ville.syrjala@linux.intel.com
We'll be needing to reload the program for individual DMCs.
To make that possible pull the code to load the program for
a single DMC into a new function.
This does change the order of things during init/resume
a bit; previously we loaded the program RAM for all DMCs first,
and then loaded the MMIO registers for all DMCs. Now those
operations will be interleaved between different DMCs.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-5-ville.syrjala@linux.intel.com
Supposedly nothing post-MTL (even BMG) needs the pipe DMC clock
gating w/a (Wa_16015201720), so don't apply it.
TODO: check if the ADL/DG2 "clock gating needed during DMC loading" part
is actually needed, not seeing anything in the docs about it...
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-2-ville.syrjala@linux.intel.com
DIV_ROUND_CLOSEST_ULL uses do_div(), which expects a 32-bit divisor.
When passing a 64-bit constant like CURVE2_MULTIPLIER, the value is
silently truncated to u32, potentially leading to incorrect results
on large divisors.
Replace DIV_ROUND_CLOSEST_ULL with DIV64_U64_ROUND_CLOSEST which correctly
handles full 64-bit division.
v2: Use DIV64_U64_ROUND_CLOSEST instead of div64_u64 macro. (Jani)
Fixes: 5947642004 ("drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2")
Reported-by: Vas Novikov <vasya.novikov@gmail.com>
Closes: https://lore.kernel.org/all/8d7c7958-9558-4c8a-a81a-e9310f2d8852@gmail.com/
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Vas Novikov <vasya.novikov@gmail.com>
Cc: stable@vger.kernel.org # v6.15+
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250618130951.1596587-2-ankit.k.nautiyal@intel.com
(cherry picked from commit b300a175a1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The drm panel funcs should be static, fix it.
Fixes: 3fdd5bfbd6 ("drm/i915/panel: register drm_panel and call prepare/unprepare for ICL+ DSI")
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250612124617.626958-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/i915 feature pull for v6.17:
Features and functionality:
- Add support for DSC fractional link bpp on DP MST (Imre)
- Add support for simultaneous Panel Replay and Adaptive Sync (Jouni)
- Add support for PTL+ double buffered LUT registers (Chaitanya, Ville)
- Add PIPEDMC event handling in preparation for flip queue (Ville)
Refactoring and cleanups:
- Rename lots of DPLL interfaces to unify them (Suraj)
- Allocate struct intel_display dynamically (Jani)
- Abstract VLV IOSF sideband better (Jani)
- Use str_true_false() helper (Yumeng Fang)
- Refactor DSB code in preparation for flip queue (Ville)
- Use drm_modeset_lock_assert_held() instead of open coding (Luca)
- Remove unused arg from skl_scaler_get_filter_select() (Luca)
- Split out a separate display register header (Jani)
- Abstract DRAM detection better (Jani)
- Convert LPT/WPT SBI sideband to struct intel_display (Jani)
Fixes:
- Fix DSI HS command dispatch with forced pipeline flush (Gareth Yu)
- Fix BMG and LNL+ DP adaptive sync SDP programming (Ankit)
- Fix error path for xe display workqueue allocation (Haoxiang Li)
- Disable DP AUX access probe where not required (Imre)
- Fix DKL PHY access if the port is invalid (Luca)
- Fix PSR2_SU_STATUS access on ADL+ (Jouni)
- Add sanity checks for porch and sync on BXT/GLK DSI (Ville)
DRM core changes:
- Change AUX DPCD access probe address (Imre)
- Refactor EDID quirks, amd make them available to drivers (Imre)
- Add quirk for DPCD access probe (Imre)
- Add DPCD definitions for Panel Replay capabilities (Jouni)
Merges:
- Backmerges to sync with v6.15-rcs and v6.16-rc1 (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/fff9f231850ed410bd81b53de43eff0b98240d31@intel.com
Now that we have dentries and the ability to create meaningful symlinks
to them, don't keep a name string in each tracker. Switch the output
format to print "class@address", and drop the name field.
Also, add a kerneldoc header for ref_tracker_dir_init().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-9-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A later patch in the series will be adding debugfs files for each
ref_tracker that get created in ref_tracker_dir_init(). The format will
be "class@%px". The current "name" string can vary between
ref_tracker_dir objects of the same type, so it's not suitable for this
purpose.
Add a new "class" string to the ref_tracker dir that describes the
the type of object (sans any individual info for that object).
Also, in the i915 driver, gate the creation of debugfs files on whether
the dentry pointer is still set to NULL. CI has shown that the
ref_tracker_dir can be initialized more than once.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-4-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The values of ana_cp_int, and ana_cp_prop are clamped between 1 and 127.
Use the more intuitive and readable clamp() macro instead of using
nested max(min(...)).
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250618130951.1596587-3-ankit.k.nautiyal@intel.com
DIV_ROUND_CLOSEST_ULL uses do_div(), which expects a 32-bit divisor.
When passing a 64-bit constant like CURVE2_MULTIPLIER, the value is
silently truncated to u32, potentially leading to incorrect results
on large divisors.
Replace DIV_ROUND_CLOSEST_ULL with DIV64_U64_ROUND_CLOSEST which correctly
handles full 64-bit division.
v2: Use DIV64_U64_ROUND_CLOSEST instead of div64_u64 macro. (Jani)
Fixes: 5947642004 ("drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2")
Reported-by: Vas Novikov <vasya.novikov@gmail.com>
Closes: https://lore.kernel.org/all/8d7c7958-9558-4c8a-a81a-e9310f2d8852@gmail.com/
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Vas Novikov <vasya.novikov@gmail.com>
Cc: stable@vger.kernel.org # v6.15+
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250618130951.1596587-2-ankit.k.nautiyal@intel.com
Fix indents, use of spaces vs. tabs, grouping, remove superfluous
comments, remove some line continuations, wrap macro arguments in
parens, rename dev_priv to display. This is the way.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250618155137.1651865-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Display version 30.02 should be treated the same as other Xe3 IP, but
will have a slightly different set of workarounds.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-2-dnyaneshwar.bhadane@intel.com
wa_16023981245 need to be extended for display version 30.02
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-10-dnyaneshwar.bhadane@intel.com
WCL added a c10 phy connected to port B. PTL code is currently
restricting c10 to phy_a only.
PTL doesn't have a PHY connected to PORT B; as such,there will
never be a case where PTL uses PHY B.
WCL uses PORT A and B with the C10 PHY.Reusing the condition
for WCL and extending it for PORT B should not cause any issues
for PTL.
-v2: Reuse and extend PTL condition for WCL (Matt)
Bspec: 73944
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-9-dnyaneshwar.bhadane@intel.com
Display version 30.02 should be treated the same as other Xe3 IP.
So exteding DMC load path the condition for it.
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-8-dnyaneshwar.bhadane@intel.com
Display version 30.02 has a lower max cdclk rate than 30.00.
Bspec: 68861
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-6-dnyaneshwar.bhadane@intel.com
Bandwidth parameters for WCL have been updated with respect to
previous display releases. Encode them into xe3lpd_3002_sa_info and use
that new struct.
-v2: Resolve conflict to apply patch.
Bspec: 68859
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-5-dnyaneshwar.bhadane@intel.com
Current DSB hardware is apparently a bit borked and likes to signal
spurious GOSUB errors. We already have most for the workarounds for
this in place, but the last part is simply not enabling the corresponding
interrupt.
While at it polish up the w/a comments with the w/a number,
and consistently take the short blurp from the w/a page.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-7-ville.syrjala@linux.intel.com
