The Forcewake timeout issue has been observed on Gen 12.0 and above.
To address this, disable Render Power-Gating (RPG) during live self-tests
for these generations. The temporary workaround 'drm/i915/mtl: do not
enable render power-gating on MTL' disables RPG globally, which is
unnecessary since the issues were only seen during self-tests.
v2: take runtime pm wakeref
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9413
Fixes: 25e7976db8 ("drm/i915/mtl: do not enable render power-gating on MTL")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Karthik Poosa <karthik.poosa@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310152821.2931678-1-sk.anirban@intel.com
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----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=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
Going forward, struct intel_display is the main display device data
pointer. Convert the external interfaces of intel_display_irq.[ch] to
struct intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/83b552154761d2790d8c774707e8d7612037bdf5.1742481923.git.jani.nikula@intel.com
msleep is very imprecise for timeouts shorter than 20
milliseconds and most probably will sleep longer. Use
uslee_range() instead.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314021225.11813-5-andi.shyti@linux.intel.com
This test was designed to isolate a bug in tigerlake and dg2 hardware.
The bug was found and fixed in newer generations.
Since we won't support any new hardware with this driver, the test
should now be turned off in the CI to not pollute it with random failures
on previous hardware.
For reference, the issue has been discssued here[*].
[*] https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13697
Signed-off-by: Mikolaj Wasiak <mikolaj.wasiak@intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/uxxb22n667zb3aic6zs4mr2krv5zavav5v2zjgqnhnabgxgzif@4icszicjakex
Since commit d59cf7bb73 ("drm/i915/display: Use dma_fence interfaces
instead of i915_sw_fence") we don't have anyone waiting on the
I915_RESET_MODESET bit, and there's no need for its semantics. Instead,
simply return true from intel_display_reset_prepare() to indicate that
intel_display_reset_finish() should be called.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/294690db3fae8fec7f356edf467e79882ed494db.1741001054.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We customarily define the bits of a register in big endian
order. Reorder the gen9+ timestamp freq register bits to match.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-13-ville.syrjala@linux.intel.com
We share the bit definitions between the older
RING_FAULT registers and their various gen12+
counterparts. Currently the bits are defined next
to the new registers which isn't what we typically do.
Move the bit definitions next the older register offsets,
and leave breadcrumbs around the gen12+ registers to make
it easier to find the right bits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-3-ville.syrjala@linux.intel.com
The fault engine ID field has been 5 bits since icl. Bump our
define to match. The extra bits were unused before icl so we
should be able to use the larger mask unconditionally.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-2-ville.syrjala@linux.intel.com
drm/i915 feature pull for v6.15:
Features and functionality:
- Enable DP 128b/132b SST DSC (Jani, Imre)
- Allow DSB to perform commits when VRR is enabled (Ville)
- Compute HDMI PLLs for SNPS/C10 PHYs for rates not in fixed tables (Ankit)
- Allow DSB usage when PSR is enabled on LNL+ (Jouni)
- Enable Panel Replay mode change without full modeset (Jouni)
- Enable async flips with compressed buffers on ICL+ (Ville)
- Support luminance based brightness control via DPCD for eDP (Suraj)
- Enable VRR enable/disable without full modeset (Mitul, Ankit)
- Add debugfs facility for force testing HDCP 1.4 (Suraj)
- Add scaler tracepoints, improve plane tracepoints (Ville)
- Improve DMC wakelock debugging facilities (Gustavo)
- Allow GuC SLPC default strategies on MTL+ for performance (Rodrigo)
- Provide more information on display faults (Ville)
Refactoring and cleanups:
- Continue conversions to struct intel_display (Ville, Jani, Suraj, Imre)
- Joiner and Y plane reorganization (Ville)
- Move HDCP debugfs to intel_hdcp.c (Jani)
- Clean up and unify LSPCON interfaces (Jani)
- Move code out of intel_display.c to reduce its size (Ville)
- Clean up and simplify DDI port enabling/disabling (Imre)
- Make LPT LP a dedicated PCH type, refactor (Jani)
- Simplify DSC range BPG offset calculation (Ankit)
- Scaler cleanups (Ville)
- Remove unused code from GVT (David Alan Gilbert)
- Improve plane debugging (Ville)
- DSB and VRR refactoring (Ville)
Fixes:
- Check if vblank is sufficient for DSC prefill and scaler (Mitul)
- Fix Mesa clear color alignment regression (Ville)
- Add missing TC DP PHY lane stagger delay (Imre)
- Fix DSB + VRR usage for PTL+ (Ville)
- Improve robustness of display VT-d workarounds (Ville)
- Fix platforms for dbuf tracker state service programming (Ravi)
- Fix DMC wakelock support conditions (Gustavo)
- Amend DMC wakelock register ranges (Gustavo)
- Disable the Common Primary Timing Generator (CMTG) (Gustavo)
- Enable C20 PHY SSC (Suraj)
- Add workaround for DKL PHY DP mode write (Nemesa)
- Fix build warnings on clamp() usage (Guenter Roeck, Ankit)
- Fix error handling while adding a connector (Imre)
- Avoid full modeset at probe on vblank delay mismatches (Ville)
- Fix encoder HDMI check for HDCP line rekeying (Suraj)
- Fix HDCP repeater authentication during topology change (Suraj)
- Handle display PHY power state reset for power savings (Mika)
- Fix typos all over the place (Nitin)
- Update HDMI TMDS C20 parameters for various platforms (Dnyaneshwar)
- Guarantee a minimum hblank time for 128b/132b and 8b/10b MST (Arun, Imre)
- Do not hardcode LSPCON settle timeout (Giedrius Statkevičius)
Xe driver changes:
- Re-use display vmas when possible (Maarten)
- Remove double pageflip (Maarten)
- Enable DP tunneling (Imre)
- Separate i915 and xe tracepoints (Ville)
DRM core changes:
- Increase DPCD eDP display control CAP size to 5 bytes (Suraj)
- Add DPCD eDP version 1.5 definition (Suraj)
- Add timeout parameter to drm_lspcon_set_mode() (Giedrius Statkevičius)
Merges:
- Backmerge drm-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87h64j7b7n.fsf@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into drm-next
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next
can base on rc4.
Signed-off-by: Dave Airlie <airlied@redhat.com>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/all/d293dd4dd9cb6a9bb9e99f3fc11ea174c6525bf8.1738746904.git.namcao@linutronix.de
spin_lock/unlock() functions used in interrupt contexts could
result in a deadlock, as seen in GitLab issue #13399,
which occurs when interrupt comes in while holding a lock.
Try to remedy the problem by saving irq state before spin lock
acquisition.
v2: add irqs' state save/restore calls to all locks/unlocks in
signal_irq_work() execution (Maciej)
v3: use with spin_lock_irqsave() in guc_lrc_desc_unpin() instead
of other lock/unlock calls and add Fixes and Cc tags (Tvrtko);
change title and commit message
Fixes: 2f2cc53b5f ("drm/i915/guc: Close deregister-context race against CT-loss")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13399
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/pusppq5ybyszau2oocboj3mtj5x574gwij323jlclm5zxvimmu@mnfg6odxbpsv
(cherry picked from commit c088387ddd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
kmap_local_page(), unlike kmap(), performs a contextualized
mapping of pages. This means the pages are mapped locally to the
thread that created them, making them invisible outside the
thread and safer to use.
Replace kmap() and kunmap() with kmap_local_page() and
kunmap_local() counterparts for improved safety.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214003437.1311476-1-andi.shyti@linux.intel.com
spin_lock/unlock() functions used in interrupt contexts could
result in a deadlock, as seen in GitLab issue #13399,
which occurs when interrupt comes in while holding a lock.
Try to remedy the problem by saving irq state before spin lock
acquisition.
v2: add irqs' state save/restore calls to all locks/unlocks in
signal_irq_work() execution (Maciej)
v3: use with spin_lock_irqsave() in guc_lrc_desc_unpin() instead
of other lock/unlock calls and add Fixes and Cc tags (Tvrtko);
change title and commit message
Fixes: 2f2cc53b5f ("drm/i915/guc: Close deregister-context race against CT-loss")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13399
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/pusppq5ybyszau2oocboj3mtj5x574gwij323jlclm5zxvimmu@mnfg6odxbpsv
Now that we have device wedged event provided by DRM core, make use
of it and support both driver rebind and bus-reset based recovery.
With this in place, userspace will be notified of wedged device on
gt reset failure.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-5-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pass intel_display to the display power stuff. These are spread
all over the place so tend to hinder clean conversions of whole
files.
TODO: The gt part/unpark power domain shenanigans need some
kind of more abstract interface...
v2: Deal with cmtg
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-7-ville.syrjala@linux.intel.com
We need
4ba4f1afb6 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Default SLPC power profile is Base(0). Power Saving mode(1)
has conservative up/down thresholds and is suitable for use with
apps that typically need to be power efficient.
Selected power profile will be displayed in this format-
$ cat slpc_power_profile
[base] power_saving
$ echo power_saving > slpc_power_profile
$ cat slpc_power_profile
base [power_saving]
v2: Disable waitboost in power saving profile, update sysfs
format and add some kernel doc for SLPC (Rodrigo)
v3: Update doc with info about power profiles (Rodrigo)
v4: Checkpatch warning and remove extra line (Rodrigo)
Cc: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117215753.749906-1-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
After the context is unpinned the backing memory can also be unpinned,
so any accesses via the lrc_reg_state pointer can end up in unmapped
memory. To avoid that, make sure to only access that memory if the
context is pinned when printing its info.
v2: fix newline alignment
Fixes: 28ff6520a3 ("drm/i915/guc: Update GuC debugfs to support new GuC")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115001334.3875347-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 5bea40687c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When running igt@gem_exec_balancer@individual for multiple iterations,
it is seen that the delta busyness returned by PMU is 0. The issue stems
from a combination of 2 implementation specific details:
1) gt_park is throttling __update_guc_busyness_stats() so that it does
not hog PCI bandwidth for some use cases. (Ref: 59bcdb564b)
2) busyness implementation always returns monotonically increasing
counters. (Ref: cf907f6d29)
If an application queried an engine while it was active,
engine->stats.guc.running is set to true. Following that, if all PM
wakeref's are released, then gt is parked. At this time the throttling
of __update_guc_busyness_stats() may result in a missed update to the
running state of the engine (due to (1) above). This means subsequent
calls to guc_engine_busyness() will think that the engine is still
running and they will keep updating the cached counter (stats->total).
This results in an inflated cached counter.
Later when the application runs a workload and queries for busyness, we
return the cached value since it is larger than the actual value (due to
(2) above)
All subsequent queries will return the same large (inflated) value, so
the application sees a delta busyness of zero.
Fix the issue by resetting the running state of engines each time
intel_guc_busyness_park() is called.
v2: (Rodrigo)
- Use the correct tag in commit message
- Drop the redundant wakeref check in guc_engine_busyness() and update
commit message
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13366
Fixes: cf907f6d29 ("i915/guc: Ensure busyness counter increases motonically")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123193839.2394694-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 431b742e2b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit 835443da6f.
Logging with gt_err() causes CI to detect an error even in cases
of intentional error injection. Since real errors are already
correctly reported by CI, this additional message is unnecessary.
Furthermore, a GT wedge is already being logged elsewhere, so
instead of adjusting the log level, revert the above mentioned
commit to prevent redundant error reporting.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/pynwwza2xyvicokflxc6lduwwrzwoihihaan54ago3m2xzzagu@qva2ue4tydie
After the context is unpinned the backing memory can also be unpinned,
so any accesses via the lrc_reg_state pointer can end up in unmapped
memory. To avoid that, make sure to only access that memory if the
context is pinned when printing its info.
v2: fix newline alignment
Fixes: 28ff6520a3 ("drm/i915/guc: Update GuC debugfs to support new GuC")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115001334.3875347-1-daniele.ceraolospurio@intel.com
Previously, the RPS function was being used, which utilizes
raw frequency to calculate measured power. This commit introduces
a dedicated function specifically for measuring power in SLPC,
ensuring more accurate and reliable power measurements.
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113095912.356147-3-sk.anirban@intel.com
Fix the frequency calculation by ensuring it uses the raw frequency only.
Update live_rps_power test to use the correct frequency values for logging
and comparison.
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113095912.356147-2-sk.anirban@intel.com
Add Wa_22010465259 which points to an existing WA, but
was missing from the comment list. While at it, update
the other WAs and their applicable platforms as well.
v1: Initial commit.
v2: Add DG2 platform to Wa_22010465259.
v3: Removed DG2 platform to Wa_22010465259 since it
was for preproduction.
Signed-off-by: Ranu Maurya <ranu.maurya@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116093115.2437154-1-ranu.maurya@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When running igt@gem_exec_balancer@individual for multiple iterations,
it is seen that the delta busyness returned by PMU is 0. The issue stems
from a combination of 2 implementation specific details:
1) gt_park is throttling __update_guc_busyness_stats() so that it does
not hog PCI bandwidth for some use cases. (Ref: 59bcdb564b)
2) busyness implementation always returns monotonically increasing
counters. (Ref: cf907f6d29)
If an application queried an engine while it was active,
engine->stats.guc.running is set to true. Following that, if all PM
wakeref's are released, then gt is parked. At this time the throttling
of __update_guc_busyness_stats() may result in a missed update to the
running state of the engine (due to (1) above). This means subsequent
calls to guc_engine_busyness() will think that the engine is still
running and they will keep updating the cached counter (stats->total).
This results in an inflated cached counter.
Later when the application runs a workload and queries for busyness, we
return the cached value since it is larger than the actual value (due to
(2) above)
All subsequent queries will return the same large (inflated) value, so
the application sees a delta busyness of zero.
Fix the issue by resetting the running state of engines each time
intel_guc_busyness_park() is called.
v2: (Rodrigo)
- Use the correct tag in commit message
- Drop the redundant wakeref check in guc_engine_busyness() and update
commit message
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13366
Fixes: cf907f6d29 ("i915/guc: Ensure busyness counter increases motonically")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123193839.2394694-1-umesh.nerlige.ramappa@intel.com
Fix all typos in files under drm/i915/gt reported by codespell tool.
v2: Fix grammar mistake in comment. <Andi>
v3: Correct typo in commit log. <Krzysztof Niemiec>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-2-nitin.r.gote@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
1) Per-CPU kthreads must stay affine to a single CPU and never execute
relevant code on any other CPU. This is currently handled by smpboot
code which takes care of CPU-hotplug operations. Affinity here is
a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and can't
run anywhere else. The affinity is set through kthread_bind_mask()
and the subsystem takes care by itself to handle CPU-hotplug
operations. Affinity here is assumed to be a correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node. This
is not a correctness constraint but merely a preference in terms of
memory locality. kswapd and kcompactd both fall into this category.
The affinity is set manually like for any other task and CPU-hotplug
is supposed to be handled by the relevant subsystem so that the task
is properly reaffined whenever a given CPU from the node comes up.
Also care should be taken so that the node affinity doesn't cross
isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its own
ad-hoc way.
This is an infrastructure proposal to handle this with the following API
changes:
_ kthread_create_on_node() automatically affines the created kthread to
its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called right
after kthread_create_on_node() to specify a preferred affinity
different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine
to the housekeeping CPUs (which means to all online CPUs most of the
time or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
* Consolidate a bunch of ad-hoc implementations of kthread_run_on_cpu()
* Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
* Add some correctness check to ensure kthread_bind() is always called
before the first kthread wake up.
* Default affine kthread to its preferred node.
* Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
* Implement kthreads preferred affinity
* Unify kthread worker and kthread API's style
* Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation.
-----BEGIN PGP SIGNATURE-----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=g8In
-----END PGP SIGNATURE-----
Merge tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
To aid debug of sporadic issues, include the requested frequency in
the debug message as well as the actual frequency. That way we know
for certain that the clamping is not because the driver forgot to ask.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241221014329.4048408-1-John.C.Harrison@Intel.com
The Balancer and DCC strategies were left off on a fear that
these strategies would conflict with the i915's waitboost.
However, on MTL and Beyond these strategies are only active in
certain conditions where the system is TDP limited.
So, they don't conflict, but help the
waitboost by guaranteeing a bit more of GT frequency.
Without these strategies we were likely leaving some performance
behind on some scenarios.
With this change in place, the enabling/disabling of DCC and Balancer
will now be chosen by GuC, on a platform/GT basis.
v2: - Fix typos and be clear on GuC decision on platform basis (Vinay)
- Limit change to MTL and beyond, where GuC started to take
TDP limit into consideration.
v3: Fix compilation. Actually amend the changes...
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110144640.1032250-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Current live_rps_control() implementation errors out on throttling.
This was done with the assumption that throttling to minimum frequency
is a catastrophic failure, which is incorrect. Throttling can happen
due to variety of reasons and often times out of our control. Also,
the resulting frequency can be at any given point below the maximum
allowed. Change throttle criteria to reflect this logic and drop the
error, as it doesn't necessarily mean selftest failure.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250102110618.174415-1-raag.jadav@intel.com
kthread_create() creates a kthread without running it yet. kthread_run()
creates a kthread and runs it.
On the other hand, kthread_create_worker() creates a kthread worker and
runs it.
This difference in behaviours is confusing. Also there is no way to
create a kthread worker and affine it using kthread_bind_mask() or
kthread_affine_preferred() before starting it.
Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]()
that behaves just like kthread_run(). kthread_create_worker[_on_cpu]()
will now only create a kthread worker without starting it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
The last use of intel_ring_cacheline_align() was removed in 2017 by
commit afa8ce5b30 ("drm/i915: Nuke legacy flip queueing code")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Tvrtko Ursulin <tursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241227113754.25871-3-tursulin@igalia.com
intel_huc_suspend() was added in 2022 by
commit 27536e0327 ("drm/i915/huc: track delayed HuC load with a
fence")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Tvrtko Ursulin <tursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241227113754.25871-2-tursulin@igalia.com
TAINT_WARN is used to notify CI about non-recoverable failures, which
require device to be restarted. In some cases, there is no sufficient
information about the reason for the restart. The test runner is just
killed, and DUT is rebooted, logging only 'probe with driver i915 failed
with error -4' to dmesg.
Printing error to dmesg before TAINT_WARN, would explain why the device
has been restarted, and what caused the malfunction in the first place.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220131714.1309483-1-andi.shyti@linux.intel.com
sub-pipe PG is not present on DG1. Setting these bits can disable
other power gates and cause GPU hangs on video playbacks.
VLK: 16314, 4304
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13381
Fixes: 85a12d7eb8 ("drm/i915/tgl: Fix Media power gate sequence.")
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219210019.70532-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Instead of drm_err(), prefer gt_err() and ENGINE_TRACE()
for GEM tracing in i915. So, it will be good to use ENGINE_TRACE()
over drm_err() drm_device based logging for engine debug log.
v2: Bit more specific in commit description (Andi)
v3: Use gt_err() along with ENGINE_TRACE() in place of drm_err() (Andi)
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217100058.2819053-1-nitin.r.gote@intel.com
Add RC6 & RC0 frequency printing to ensure accurate energy
readings aimed at addressing GPU energy leaks and power
measurement failures.
Also update sleep time for RC6 mode to match RC0.
v2:
- Improved commit message.
v3:
- Used pr_err log to display frequency (Anshuman)
- Sorted headers alphabetically (Sai Teja)
v4:
- Improved commit message.
- Fix pr_err log (Sai Teja)
v5:
- Add error & debug logging for RC0 power and frequency checks (Anshuman)
v6:
- Modify debug logging for RC0 power and frequency checks (Sai Teja)
v7:
- Use pr_debug if RC0 power isn't measured but frequency is (Anshuman)
- Improved commit message (Badal)
- Change API to read actual frequency without applying forcewake (Badal)
- Update sleep time for RC6 mode (Anshuman)
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129154716.2764974-1-sk.anirban@intel.com
Issue seen again where engine resets fails because the engine resumes from
an incorrect RING_HEAD. HEAD is still not 0 even after writing into it.
This seems to be timing issue and we experimented different values from 5ms
to 50ms and found out that 50ms works best based on testing.
So, if write doesn't succeed at first then retry again.
v2: add a comment (Andi Shyti)
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12806
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217063532.2729031-1-nitin.r.gote@intel.com
Updating the guc_error message to show how many g2h responses
are still outstanding, in order to help with future debugging.
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213204720.3918056-1-jesus.narvaez@intel.com
On gt reset, if a context is running, then accumulate it's active time
into the busyness counter since there will be no chance for the context
to switch out and update it's run time.
v2: Move comment right above the if (John)
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-4-umesh.nerlige.ramappa@intel.com
Active busyness of an engine is calculated using gt timestamp and the
context switch in time. While capturing the gt timestamp, it's possible
that the context switches out. This race could result in an active
busyness value that is greater than the actual context runtime value by a
small amount. This leads to a negative delta and throws off busyness
calculations for the user.
If a subsequent count is smaller than the previous one, just return the
previous one, since we expect the busyness to catch up.
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-3-umesh.nerlige.ramappa@intel.com
On GT reset, we store total busyness counts for all engines and
re-register the utilization buffer with GuC. At that time we should
reset the buffer, so that we don't get spurious busyness counts on
subsequent queries.
To repro this issue, run igt@perf_pmu@busy-hang followed by
igt@perf_pmu@most-busy-idle-check-all for a couple iterations.
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-2-umesh.nerlige.ramappa@intel.com
Add delays to allow frequency stabilization before power measurement
to fix sporadic power conservation issues in live_rps_power test.
v2:
- Move delay to respective function (Badal)
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203061114.2790448-1-sk.anirban@intel.com
Currently intel_dpt_resume() tries to blindly rewrite all the
PTEs for currently bound DPT VMAs. That is problematic because
the CPU mapping for the DPT is only really guaranteed to exist
while the DPT object has been pinned. In the past we worked
around this issue by making DPT objects unshrinkable, but that
is undesirable as it'll waste physical RAM.
Let's instead forcefully evict all the DPT VMAs on suspend,
thus guaranteeing that intel_dpt_resume() has nothing to do.
To guarantee that all the DPT VMAs are evictable by
intel_dpt_suspend() we need to flush the cleanup workqueue
after the display output has been shut down.
And for good measure throw in a few extra WARNs to catch
any mistakes.
Cc: Brian Geffon <bgeffon@google.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127061117.25622-4-ville.syrjala@linux.intel.com
Reviewed-by: Vidya Srinivas <vidya.srinivas@intel.com>
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+
-----BEGIN PGP SIGNATURE-----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=8cUI
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of rework, the panic helper support is being added to
more drivers, v3d gets support for HW superpages, scheduler
documentation, drm client and video aperture reworks, some new
MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel
has some Pantherlake enablement and xe is getting some SRIOV bits, but
just lots of stuff everywhere.
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+"
* tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits)
drm/xe/guc: Fix dereference before NULL check
drm/amd: Fix initialization mistake for NBIO 7.7.0
Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"
drm/amd/display: Fix failure to read vram info due to static BP_RESULT
drm/amdgpu: enable GTT fallback handling for dGPUs only
drm/amd/amdgpu: limit single process inside MES
drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X
drm/amdgpu/mes12: correct kiq unmap latency
drm/amdgpu: Support vcn and jpeg error info parsing
drm/amd : Update MES API header file for v11 & v12
drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling
drm/amdkfd: change kfd process kref count at creation
drm/amdgpu: Cleanup shift coding style
drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data
drm/amdgpu: Implement virt req_ras_err_count
drm/amdgpu: VF Query RAS Caps from Host if supported
drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry
drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support
drm/amd/display: 3.2.309
drm/amd/display: Adjust VSDB parser for replay feature
...
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various mechanisms
and fail to provide a clear separation of the functionalities.
Clean this up by:
* consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
* removing the last includes of header files which are pulling in other
headers outside of the VDSO namespace.
* seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every architecture
add support seperately.
-----BEGIN PGP SIGNATURE-----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=q5eD
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso data page handling updates from Thomas Gleixner:
"First steps of consolidating the VDSO data page handling.
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various
mechanisms and fail to provide a clear separation of the
functionalities.
Clean this up by:
- consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
- removing the last includes of header files which are pulling in
other headers outside of the VDSO namespace.
- seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every
architecture add support seperately"
* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/vdso: Add missing brackets in switch case
vdso: Rename struct arch_vdso_data to arch_vdso_time_data
powerpc: Split systemcfg struct definitions out from vdso
powerpc: Split systemcfg data out of vdso data page
powerpc: Add kconfig option for the systemcfg page
powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
powerpc/pseries/lparcfg: Fix printing of system_active_processors
powerpc/procfs: Propagate error of remap_pfn_range()
powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
x86/vdso: Split virtual clock pages into dedicated mapping
x86/vdso: Delete vvar.h
x86/vdso: Access vdso data without vvar.h
x86/vdso: Move the rng offset to vsyscall.h
x86/vdso: Access rng vdso data without vvar.h
x86/vdso: Access timens vdso data without vvar.h
x86/vdso: Allocate vvar page from C code
x86/vdso: Access rng data from kernel without vvar
x86/vdso: Place vdso_data at beginning of vvar page
x86/vdso: Use __arch_get_vdso_data() to access vdso data
x86/mm/mmap: Remove arch_vma_name()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcW4gAKCRCRxhvAZXjc
okF+AP9xTMb2SlnRPBOBd9yFcmVXmQi86TSCUPAEVb+wIldGYwD/RIOdvXYJlp9v
RgJkU1DC3ddkXtONNDY6gFaP+siIWA0=
=gMc7
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This contains changes the changes for files for this cycle:
- Introduce a new reference counting mechanism for files.
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop
it has O(N^2) behaviour under contention with N concurrent
operations and it is in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make
this work and requiring rcu protection for the data structure in
question. This not just scales better it also introduces overflow
protection.
However, in contrast to generic rcuref, files require a memory
barrier and thus cannot rely on *_relaxed() atomic operations and
also require to be built on atomic_long_t as having massive amounts
of reference isn't unheard of even if it is just an attack.
This adds a file specific variant instead of making this a generic
library.
This has been tested by various people and it gives consistent
improvement up to 3-5% on workloads with loads of threads.
- Add a fastpath for find_next_zero_bit(). Skip 2-levels searching
via find_next_zero_bit() when there is a free slot in the word that
contains the next fd. This improves pts/blogbench-1.1.0 read by 8%
and write by 4% on Intel ICX 160.
- Conditionally clear full_fds_bits since it's very likely that a bit
in full_fds_bits has been cleared during __clear_open_fds(). This
improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on
Intel ICX 160.
- Get rid of all lookup_*_fdget_rcu() variants. They were used to
lookup files without taking a reference count. That became invalid
once files were switched to SLAB_TYPESAFE_BY_RCU and now we're
always taking a reference count. Switch to an already existing
helper and remove the legacy variants.
- Remove pointless includes of <linux/fdtable.h>.
- Avoid cmpxchg() in close_files() as nobody else has a reference to
the files_struct at that point.
- Move close_range() into fs/file.c and fold __close_range() into it.
- Cleanup calling conventions of alloc_fdtable() and expand_files().
- Merge __{set,clear}_close_on_exec() into one.
- Make __set_open_fd() set cloexec as well instead of doing it in two
separate steps"
* tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor
fs: port files to file_ref
fs: add file_ref
expand_files(): simplify calling conventions
make __set_open_fd() set cloexec state as well
fs: protect backing files with rcu
file.c: merge __{set,clear}_close_on_exec()
alloc_fdtable(): change calling conventions.
fs/file.c: add fast path in find_next_fd()
fs/file.c: conditionally clear full_fds
fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()
move close_range(2) into fs/file.c, fold __close_range() into it
close_files(): don't bother with xchg()
remove pointless includes of <linux/fdtable.h>
get rid of ...lookup...fdget_rcu() family
All MTL and ARL SKUs share the same GSC FW, but the newer platforms are
only supported in newer blobs. In particular, ARL-S is supported
starting from 102.0.10.1878 (which is already the minimum required
version for ARL in the code), while ARL-H and ARL-U are supported from
102.1.15.1926. Therefore, the driver needs to check which specific ARL
subplatform its running on when verifying that the GSC FW is new enough
for it.
Fixes: 2955ae8186 ("drm/i915: ARL requires a newer GSC firmware")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028233132.149745-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 3c1d5ced18)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
GuC to host communication is interrupt driven, the handling has 3
parts: interrupt context, tasklet and request queue worker.
During GuC reset prepare, interrupt is disabled before destroy
contexts steps start. The IRQ and worker are flushed to finish
any outstanding in-progress message handling. But, the tasklet
flush is missing, it might causes 2 race conditions:
1. Tasklet runs after IRQ flushed, add request to queue after worker
flush started, causes unexpected G2H message request processing,
meanwhile, reset prepare code already get the context destroyed.
This will causes error reported about bad context state.
(https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11349 and
https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12303)
2. Tasklet runs after intel_guc_submission_reset_prepare,
ct_try_receive_message start to run, while intel_uc_reset_prepare
already finished guc sanitize and set ct->enable to false. This will
causes warning on incorrect ct->enable state.
(https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12439)
Add the missing tasklet flush to flush all 3 parts.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104214103.214702-1-zhanjun.dong@intel.com
All MTL and ARL SKUs share the same GSC FW, but the newer platforms are
only supported in newer blobs. In particular, ARL-S is supported
starting from 102.0.10.1878 (which is already the minimum required
version for ARL in the code), while ARL-H and ARL-U are supported from
102.1.15.1926. Therefore, the driver needs to check which specific ARL
subplatform its running on when verifying that the GSC FW is new enough
for it.
Fixes: 2955ae8186 ("drm/i915: ARL requires a newer GSC firmware")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028233132.149745-1-daniele.ceraolospurio@intel.com
execlists_unwind_incomplete_requests() is unused since 2021's
commit eb5e7da736 ("drm/i915/guc: Reset implementation for new GuC
interface")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241103144936.238116-1-linux@treblig.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Port files to rely on file_ref reference to improve scaling and gain
overflow protection.
- We continue to WARN during get_file() in case a file that is already
marked dead is revived as get_file() is only valid if the caller
already holds a reference to the file. This hasn't changed just the
check changes.
- The semantics for epoll and ttm's dmabuf usage have changed. Both
epoll and ttm synchronize with __fput() to prevent the underlying file
from beeing freed.
(1) epoll
Explaining epoll is straightforward using a simple diagram.
Essentially, the mutex of the epoll instance needs to be taken in both
__fput() and around epi_fget() preventing the file from being freed
while it is polled or preventing the file from being resurrected.
CPU1 CPU2
fput(file)
-> __fput(file)
-> eventpoll_release(file)
-> eventpoll_release_file(file)
mutex_lock(&ep->mtx)
epi_item_poll()
-> epi_fget()
-> file_ref_get(file)
mutex_unlock(&ep->mtx)
mutex_lock(&ep->mtx);
__ep_remove()
mutex_unlock(&ep->mtx);
-> kmem_cache_free(file)
(2) ttm dmabuf
This explanation is a bit more involved. A regular dmabuf file stashed
the dmabuf in file->private_data and the file in dmabuf->file:
file->private_data = dmabuf;
dmabuf->file = file;
The generic release method of a dmabuf file handles file specific
things:
f_op->release::dma_buf_file_release()
while the generic dentry release method of a dmabuf handles dmabuf
freeing including driver specific things:
dentry->d_release::dma_buf_release()
During ttm dmabuf initialization in ttm_object_device_init() the ttm
driver copies the provided struct dma_buf_ops into a private location:
struct ttm_object_device {
spinlock_t object_lock;
struct dma_buf_ops ops;
void (*dmabuf_release)(struct dma_buf *dma_buf);
struct idr idr;
};
ttm_object_device_init(const struct dma_buf_ops *ops)
{
// copy original dma_buf_ops in private location
tdev->ops = *ops;
// stash the release method of the original struct dma_buf_ops
tdev->dmabuf_release = tdev->ops.release;
// override the release method in the copy of the struct dma_buf_ops
// with ttm's own dmabuf release method
tdev->ops.release = ttm_prime_dmabuf_release;
}
When a new dmabuf is created the struct dma_buf_ops with the overriden
release method set to ttm_prime_dmabuf_release is passed in exp_info.ops:
DEFINE_DMA_BUF_EXPORT_INFO(exp_info);
exp_info.ops = &tdev->ops;
exp_info.size = prime->size;
exp_info.flags = flags;
exp_info.priv = prime;
The call to dma_buf_export() then sets
mutex_lock_interruptible(&prime->mutex);
dma_buf = dma_buf_export(&exp_info)
{
dmabuf->ops = exp_info->ops;
}
mutex_unlock(&prime->mutex);
which creates a new dmabuf file and then install a file descriptor to
it in the callers file descriptor table:
ret = dma_buf_fd(dma_buf, flags);
When that dmabuf file is closed we now get:
fput(file)
-> __fput(file)
-> f_op->release::dma_buf_file_release()
-> dput()
-> d_op->d_release::dma_buf_release()
-> dmabuf->ops->release::ttm_prime_dmabuf_release()
mutex_lock(&prime->mutex);
if (prime->dma_buf == dma_buf)
prime->dma_buf = NULL;
mutex_unlock(&prime->mutex);
Where we can see that prime->dma_buf is set to NULL. So when we have
the following diagram:
CPU1 CPU2
fput(file)
-> __fput(file)
-> f_op->release::dma_buf_file_release()
-> dput()
-> d_op->d_release::dma_buf_release()
-> dmabuf->ops->release::ttm_prime_dmabuf_release()
ttm_prime_handle_to_fd()
mutex_lock_interruptible(&prime->mutex)
dma_buf = prime->dma_buf
dma_buf && get_dma_buf_unless_doomed(dma_buf)
-> file_ref_get(dma_buf->file)
mutex_unlock(&prime->mutex);
mutex_lock(&prime->mutex);
if (prime->dma_buf == dma_buf)
prime->dma_buf = NULL;
mutex_unlock(&prime->mutex);
-> kmem_cache_free(file)
The logic of the mechanism is the same as for epoll: sync with
__fput() preventing the file from being freed. Here the
synchronization happens through the ttm instance's prime->mutex.
Basically, the lifetime of the dma_buf and the file are tighly
coupled.
Both (1) and (2) used to call atomic_inc_not_zero() to check whether
the file has already been marked dead and then refuse to revive it.
This is only safe because both (1) and (2) sync with __fput() and thus
prevent kmem_cache_free() on the file being called and thus prevent
the file from being immediately recycled due to SLAB_TYPESAFE_BY_RCU.
Both (1) and (2) have been ported from atomic_inc_not_zero() to
file_ref_get(). That means a file that is already in the process of
being marked as FILE_REF_DEAD:
file_ref_put()
cnt = atomic_long_dec_return()
-> __file_ref_put(cnt)
if (cnt == FIlE_REF_NOREF)
atomic_long_try_cmpxchg_release(cnt, FILE_REF_DEAD)
can be revived again:
CPU1 CPU2
file_ref_put()
cnt = atomic_long_dec_return()
-> __file_ref_put(cnt)
if (cnt == FIlE_REF_NOREF)
file_ref_get()
// Brings reference back to FILE_REF_ONEREF
atomic_long_add_negative()
atomic_long_try_cmpxchg_release(cnt, FILE_REF_DEAD)
This is fine and inherent to the file_ref_get()/file_ref_put()
semantics. For both (1) and (2) this is safe because __fput() is
prevented from making progress if file_ref_get() fails due to the
aforementioned synchronization mechanisms.
Two cases need to be considered that affect both (1) epoll and (2) ttm
dmabuf:
(i) fput()'s file_ref_put() and marks the file as FILE_REF_NOREF but
before that fput() can mark the file as FILE_REF_DEAD someone
manages to sneak in a file_ref_get() and brings the refcount back
from FILE_REF_NOREF to FILE_REF_ONEREF. In that case the original
fput() doesn't call __fput(). For epoll the poll will finish and
for ttm dmabuf the file can be used again. For ttm dambuf this is
actually an advantage because it avoids immediately allocating
a new dmabuf object.
CPU1 CPU2
file_ref_put()
cnt = atomic_long_dec_return()
-> __file_ref_put(cnt)
if (cnt == FIlE_REF_NOREF)
file_ref_get()
// Brings reference back to FILE_REF_ONEREF
atomic_long_add_negative()
atomic_long_try_cmpxchg_release(cnt, FILE_REF_DEAD)
(ii) fput()'s file_ref_put() marks the file FILE_REF_NOREF and
also suceeds in actually marking it FILE_REF_DEAD and then calls
into __fput() to free the file.
When either (1) or (2) call file_ref_get() they fail as
atomic_long_add_negative() will return true.
At the same time, both (1) and (2) all file_ref_get() under
mutexes that __fput() must also acquire preventing
kmem_cache_free() from freeing the file.
So while this might be treated as a change in semantics for (1) and
(2) it really isn't. It if should end up causing issues this can be
fixed by adding a helper that does something like:
long cnt = atomic_long_read(&ref->refcnt);
do {
if (cnt < 0)
return false;
} while (!atomic_long_try_cmpxchg(&ref->refcnt, &cnt, cnt + 1));
return true;
which would block FILE_REF_NOREF to FILE_REF_ONEREF transitions.
- Jann correctly pointed out that kmem_cache_zalloc() cannot be used
anymore once files have been ported to file_ref_t.
The kmem_cache_zalloc() call will memset() the whole struct file to
zero when it is reallocated. This will also set file->f_ref to zero
which mens that a concurrent file_ref_get() can return true:
CPU1 CPU2
__get_file_rcu()
rcu_dereference_raw()
close()
[frees file]
alloc_empty_file()
kmem_cache_zalloc()
[reallocates same file]
memset(..., 0, ...)
file_ref_get()
[increments 0->1, returns true]
init_file()
file_ref_init(..., 1)
[sets to 0]
rcu_dereference_raw()
fput()
file_ref_put()
[decrements 0->FILE_REF_NOREF, frees file]
[UAF]
causing a concurrent __get_file_rcu() call to acquire a reference to
the file that is about to be reallocated and immediately freeing it
on realizing that it has been recycled. This causes a UAF for the
task that reallocated/recycled the file.
This is prevented by switching from kmem_cache_zalloc() to
kmem_cache_alloc() and initializing the fields manually. With
file->f_ref initialized last.
Note that a memset() also isn't guaranteed to atomically update an
unsigned long so it's theoretically possible to see torn and
therefore bogus counter values.
Link: https://lore.kernel.org/r/20241007-brauner-file-rcuref-v2-3-387e24dc9163@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
There aren't many users for the IS_<PLATFORM>_GT<N>() macros, and many
of them are in fact unused. Even among the users, the platform check is
often redundant. Just remove the macros.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930124948.3551980-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
we see an issue where resets fails because the engine resumes
from an incorrect RING_HEAD. Since the RING_HEAD doesn't point
to the remaining requests to re-run, but may instead point into
the uninitialised portion of the ring, the GPU may be then fed
invalid instructions from a privileged context, oft pushing the
GPU into an unrecoverable hang.
If at first the write doesn't succeed, try, try again.
v2: Avoid unnecessary timeout macro (Andi)
v3: Correct comment format (Andi)
v4: Make it generic for all platform as it won't impact (Chris)
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/5432
Testcase: igt/i915_selftest/hangcheck
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015145710.2478599-1-nitin.r.gote@intel.com
Add missing tag for "Wa_14019159160 - Case 2" (for existing
PXP code that ensures run alone mode bit is set to allow
PxP-decryption.
v5: - remove the max IP_VER check since new platforms that
i915 supports needs this fix and tag the caller too
(John Harrison).
v4: - Include IP_VER 12.71. (Matt Roper)
v3: - Check targeted platforms using IP_VAL. (John Harrison)
v2: - Fix WA id number (John Harrison).
- Improve comments and code to be specific
for the targeted platforms (John Harrison)
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016001658.2671225-1-alan.previn.teres.alexis@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fault is currently of type u32 and with the introduction of the
generalized vdso/page.h we trigger the error below:
drivers/gpu/drm/i915/gt/intel_gt_print.h:29:36: error: format ‘%lx’ expects
argument of type ‘long unsigned int’, but argument 6 has type ‘u32’ {aka
‘unsigned int’} [-Werror=format=]
29 | drm_dbg(&(_gt)->i915->drm, "GT%u: " _fmt, (_gt)->info.id,
| ^~~~~~~~
include/drm/drm_print.h:424:39: note: in definition of macro ‘drm_dev_dbg’
424 | __drm_dev_dbg(NULL, dev, cat, fmt, ##__VA_ARGS__)
| ^~~
include/drm/drm_print.h:524:33: note: in expansion of macro ‘drm_dbg_driver’
524 | #define drm_dbg(drm, fmt, ...) drm_dbg_driver(drm, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~
linux/drivers/gpu/drm/i915/gt/intel_gt_print.h:29:9: note: in expansion of macro
‘drm_dbg’
29 | drm_dbg(&(_gt)->i915->drm, "GT%u: " _fmt, (_gt)->info.id,
| ^~~~~~~
drivers/gpu/drm/i915/gt/intel_gt.c:310:25: note: in expansion of macro ‘gt_dbg’
310 | gt_dbg(gt, "Unexpected fault\n"
| ^~~~~~
This happens because the type of PAGE_MASK depends on the architecture.
Prevent the compilation error changing the 'fault' type to unsigned
long.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20241014151340.1639555-2-vincenzo.frascino@arm.com
Implement pmu support for gen2 so that one can use intel_gpu_top
on it once again.
Gen2 lacks MI_MODE/MODE_IDLE so we'll have to do a bit more work
to determine the state of the engine:
- to determine if the ring contains unconsumed data we can simply
compare RING_TAIL vs. RING_HEAD
- also check RING_HEAD vs. ACTHD to catch cases where the hardware
is still executing a batch buffer but the ring head has already
caught up with the tail. Not entirely sure if that's actually
possible or not, but maybe it can happen if the batch buffer is
initiated from the very end of the ring? But even if not strictly
necessary there's no real harm in checking anyway.
- MI_WAIT_FOR_EVENT can be detected via a dedicated bit in RING_HEAD
v2: Use genX_ prefix rarther than suffix (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008214349.23331-5-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
We've determined that accessing the (supposedly) 16bit
interrupt registers on gen2 as 32bit works just fine.
We already dropped the special case from the main interrupt
code, do so also for the gt interrupt stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008214349.23331-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
This feature flag enables GuC autoteardown which allows for a grace
period before session teardown.
Also add a HAS_PXP() helper to share with the other place that wants
to check.
Signed-off-by: Juston Li <juston.li@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906174038.1468026-1-John.C.Harrison@Intel.com
Bspec asks us to disable some compression trick on JSL. While the
bspec description is pretty vague it looks like this is some extra
trick for 10bpc+ CCS which presumably the ICL derived display engine
doesn't support.
Note that we aren't currently exposing 10bpc CCS scanout support,
but once that gets added this presumably becomes an issue.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918144445.5716-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
As of commit 2edc6a75f2 ("drm/i915: switch intel_wakeref_t underlying
type to struct ref_tracker *") we gained quite a few sparse warnings
about "Using plain integer as NULL pointer" for using 0 to initialize
wakeref_t. Switch to NULL everywhere.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002181655.582597-1-jani.nikula@intel.com
Define register offset triplets for all registers used with
GEN8_IRQ_RESET_NDX() and GEN8_IRQ_INIT_NDX() macros, and call the
underlying gen3_irq_reset() and gen3_irq_init() functions
directly. Remove the macros, along with the macro name concatenation
hackery.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002102645.136155-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
