The ce->guc_state.lock was made to protect guc_prio, which
indicates the GuC priority level.
But at the begnning of the function we perform some sanity check
of guc_prio outside its protected section. Move them within the
locked region.
Use this occasion to expand the if statement to make it clearer.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240613222402.551625-2-andi.shyti@linux.intel.com
The forcewake count and domains listing is multi process critical
and the uncore provides a spinlock for such cases.
Lock the forcewake evaluation section in the fw_domains_show()
debugfs interface.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607145131.217251-1-andi.shyti@linux.intel.com
The WA should be extended to cover VDBOX engine. We found that
28-channels 1080p VP9 encoding may hit this issue.
v3: update the WA number and explain the reason why
this workaround is needed
v2: add WA number
v1: initial version
Signed-off-by: Angus Chen <angus.chen@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426073638.45775-1-angus.chen@intel.com
Enable another workaround that is implemented inside the GuC.
v2: Use the correct Gen12 w/a id rather than the Xe version (review
feedback from Matthew R) also extend to include ARL.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528230515.479395-1-John.C.Harrison@Intel.com
The test is trying to push the heartbeat frequency to the limit, which
might sometimes fail. Such a failure does not provide valuable
information, because it does not indicate that there is something
necessarily wrong with either the driver or the hardware.
Remove the test to prevent random, unnecessary failures from appearing
in CI.
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Niemiec, Krzysztof <krzysztof.niemiec@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe2vu5h7v7ooxbhwpbfsypxg5mjrnt56gc3cgrqpnhgrgce334@qfrv2skxrp47
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
v2: Also fix comment in intel_pci_config.h (Ilpo)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0e344a72e9be596ac2b8b55a26fd674a96f03cdc.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
v2: Also change Documentation/gpu/i915.rst (Andi)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8c07233a8234858eb6711140482ef8db4c91cf4.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/461662d528c3f327c81b764b7c883cd4519d8729.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ae224504d99cc6428da6dced9dcde2b7953624ef.1717075103.git.jani.nikula@intel.com
The whole point of the previous fixes has been to change the CCS
hardware configuration to generate only one stream available to
the compute users. We did this by changing the info.engine_mask
that is set during device probe, reset during the detection of
the fused engines, and finally reset again when choosing the CCS
mode.
We can't use the engine_mask variable anymore, as with the
current configuration, it imposes only one CCS no matter what the
hardware configuration is.
Before changing the engine_mask for the third time, save it and
use it for calculating the CCS mode.
After the previous changes, the user reported a performance drop
to around 1/4. We have tested that the compute operations, with
the current patch, have improved by the same factor.
Fixes: 6db31251bb ("drm/i915/gt: Enable only one CCS for compute workload")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Gnattu OC <gnattuoc@me.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Jian Ye <jian.ye@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Tested-by: Gnattu OC <gnattuoc@me.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517090616.242529-1-andi.shyti@linux.intel.com
(cherry picked from commit a09d2327a9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
With gcc-7 and earlier, there are lots of warnings like
In file included from <command-line>:0:0:
In function '__guc_context_policy_add_priority.isra.66',
inlined from '__guc_context_set_prio.isra.67' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3292:3,
inlined from 'guc_context_set_prio' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3320:2:
include/linux/compiler_types.h:399:38: error: call to '__compiletime_assert_631' declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
...
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:2422:3: note: in expansion of macro 'FIELD_PREP'
FIELD_PREP(GUC_KLV_0_KEY, GUC_CONTEXT_POLICIES_KLV_ID_##id) | \
^~~~~~~~~~
Make sure that GUC_KLV_0_KEY is an unsigned value to avoid the warning.
Fixes: 77b6f79df6 ("drm/i915/guc: Update to GuC version 69.0.3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430164809.482131-1-julia.filipchuk@intel.com
(cherry picked from commit 364e039827)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The breadcrumbs use a GT wakeref for guarding the interrupt, but are
disarmed during release of the engine wakeref. This leaves a hole where
we may attach a breadcrumb just as the engine is parking (after it has
parked its breadcrumbs), execute the irq worker with some signalers still
attached, but never be woken again.
That issue manifests itself in CI with IGT runner timeouts while tests
are waiting indefinitely for release of all GT wakerefs.
<6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats
<7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT.
...
<6> [299.356526] sysrq: Show State
...
<6> [299.373964] task:i915_selftest state:D stack:11784 pid:5578 tgid:5578 ppid:873 flags:0x00004002
<6> [299.373967] Call Trace:
<6> [299.373968] <TASK>
<6> [299.373970] __schedule+0x3bb/0xda0
<6> [299.373974] schedule+0x41/0x110
<6> [299.373976] intel_wakeref_wait_for_idle+0x82/0x100 [i915]
<6> [299.374083] ? __pfx_var_wake_function+0x10/0x10
<6> [299.374087] live_engine_busy_stats+0x9b/0x500 [i915]
<6> [299.374173] __i915_subtests+0xbe/0x240 [i915]
<6> [299.374277] ? __pfx___intel_gt_live_setup+0x10/0x10 [i915]
<6> [299.374369] ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915]
<6> [299.374456] intel_engine_live_selftests+0x1c/0x30 [i915]
<6> [299.374547] __run_selftests+0xbb/0x190 [i915]
<6> [299.374635] i915_live_selftests+0x4b/0x90 [i915]
<6> [299.374717] i915_pci_probe+0x10d/0x210 [i915]
At the end of the interrupt worker, if there are no more engines awake,
disarm the breadcrumb and go to sleep.
Fixes: 9d5612ca16 ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423165505.465734-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit fbad43ecca)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The whole point of the previous fixes has been to change the CCS
hardware configuration to generate only one stream available to
the compute users. We did this by changing the info.engine_mask
that is set during device probe, reset during the detection of
the fused engines, and finally reset again when choosing the CCS
mode.
We can't use the engine_mask variable anymore, as with the
current configuration, it imposes only one CCS no matter what the
hardware configuration is.
Before changing the engine_mask for the third time, save it and
use it for calculating the CCS mode.
After the previous changes, the user reported a performance drop
to around 1/4. We have tested that the compute operations, with
the current patch, have improved by the same factor.
Fixes: 6db31251bb ("drm/i915/gt: Enable only one CCS for compute workload")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Gnattu OC <gnattuoc@me.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Jian Ye <jian.ye@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Tested-by: Gnattu OC <gnattuoc@me.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517090616.242529-1-andi.shyti@linux.intel.com
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
With gcc-7 and earlier, there are lots of warnings like
In file included from <command-line>:0:0:
In function '__guc_context_policy_add_priority.isra.66',
inlined from '__guc_context_set_prio.isra.67' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3292:3,
inlined from 'guc_context_set_prio' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3320:2:
include/linux/compiler_types.h:399:38: error: call to '__compiletime_assert_631' declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
...
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:2422:3: note: in expansion of macro 'FIELD_PREP'
FIELD_PREP(GUC_KLV_0_KEY, GUC_CONTEXT_POLICIES_KLV_ID_##id) | \
^~~~~~~~~~
Make sure that GUC_KLV_0_KEY is an unsigned value to avoid the warning.
Fixes: 77b6f79df6 ("drm/i915/guc: Update to GuC version 69.0.3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430164809.482131-1-julia.filipchuk@intel.com
When debugging GPU hangs Mesa developers are finding it useful to replay
the captured error state against the simulator. But due various simulator
limitations which prevent replicating all hangs, one step further is being
able to replay against a real GPU.
This is almost doable today with the missing part being able to upload the
captured context image into the driver state prior to executing the
uploaded hanging batch and all the buffers.
To enable this last part we add a new context parameter called
I915_CONTEXT_PARAM_CONTEXT_IMAGE. It follows the existing SSEU
configuration pattern of being able to select which context to apply
against, paired with the actual image and its size.
Since this is adding a new concept of debug only uapi, we hide it behind
a new kconfig option and also require activation with a module parameter.
Together with a warning banner printed at driver load, all those combined
should be sufficient to guard against inadvertently enabling the feature.
In terms of implementation we allow the legacy context set param to be
used since that removes the need to record the per context data in the
proto context, while still allowing flexibility of specifying context
images for any context.
Mesa MR using the uapi can be seen at:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27594
v2:
* Fix whitespace alignment as per checkpatch.
* Added warning on userspace misuse.
* Rebase for extracting ce->default_state shadowing.
v3:
* Rebase for I915_CONTEXT_PARAM_LOW_LATENCY.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Carlos Santa <carlos.santa@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145939.87427-2-tursulin@igalia.com
To enable adding override of the default engine context image let us start
shadowing the per engine state in the context.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145939.87427-1-tursulin@igalia.com
new drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing
-----BEGIN PGP SIGNATURE-----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=ocVM
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm subsystems for 6.10.
In drivers the main thing is a new driver for ARM Mali firmware based
GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
scattered changes to everything else.
In the core a bunch of headers and Kconfig was refactored, along with
the addition of a new panic handler which is meant to provide a user
friendly message when a panic happens and graphical display is
enabled.
New drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
Core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing"
* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
drm/xe/ads: Use flexible-array
drm/xe: Use ordered WQ for G2H handler
drm/msm/gen_header: allow skipping the validation
drm/msm/a6xx: Cleanup indexed regs const'ness
drm/msm: Add devcoredump support for a750
drm/msm: Adjust a7xx GBIF debugbus dumping
drm/msm: Update a6xx registers XML
drm/msm: Fix imported a750 snapshot header for upstream
drm/msm: Import a750 snapshot registers from kgsl
MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
drm/msm/adreno: fix CP cycles stat retrieval on a7xx
drm/msm/a7xx: allow writing to CP_BV counter selection registers
drm: zynqmp_dpsub: Always register bridge
Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
drm/fbdev-generic: Do not set physical framebuffer address
drm/panthor: Fix the FW reset logic
drm/panthor: Make sure we handle 'unknown group state' case properly
...
The breadcrumbs use a GT wakeref for guarding the interrupt, but are
disarmed during release of the engine wakeref. This leaves a hole where
we may attach a breadcrumb just as the engine is parking (after it has
parked its breadcrumbs), execute the irq worker with some signalers still
attached, but never be woken again.
That issue manifests itself in CI with IGT runner timeouts while tests
are waiting indefinitely for release of all GT wakerefs.
<6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats
<7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT.
...
<6> [299.356526] sysrq: Show State
...
<6> [299.373964] task:i915_selftest state:D stack:11784 pid:5578 tgid:5578 ppid:873 flags:0x00004002
<6> [299.373967] Call Trace:
<6> [299.373968] <TASK>
<6> [299.373970] __schedule+0x3bb/0xda0
<6> [299.373974] schedule+0x41/0x110
<6> [299.373976] intel_wakeref_wait_for_idle+0x82/0x100 [i915]
<6> [299.374083] ? __pfx_var_wake_function+0x10/0x10
<6> [299.374087] live_engine_busy_stats+0x9b/0x500 [i915]
<6> [299.374173] __i915_subtests+0xbe/0x240 [i915]
<6> [299.374277] ? __pfx___intel_gt_live_setup+0x10/0x10 [i915]
<6> [299.374369] ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915]
<6> [299.374456] intel_engine_live_selftests+0x1c/0x30 [i915]
<6> [299.374547] __run_selftests+0xbb/0x190 [i915]
<6> [299.374635] i915_live_selftests+0x4b/0x90 [i915]
<6> [299.374717] i915_pci_probe+0x10d/0x210 [i915]
At the end of the interrupt worker, if there are no more engines awake,
disarm the breadcrumb and go to sleep.
Fixes: 9d5612ca16 ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423165505.465734-2-janusz.krzysztofik@linux.intel.com
HAS_REGION() takes a bitmask, not the region ID. This causes the
GEM_BUG_ON() to assert that the SMEM region is available rather
than the intended LMEM region. No real harm since SMEM is always
available, but also not checking what was intended.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502121423.1002-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We missed setting the CCS mode during resume and engine resets.
Create a workaround to be added in the engine's workaround list.
This workaround sets the XEHP_CCS_MODE value at every reset.
The issue can be reproduced by running:
$ clpeak --kernel-latency
Without resetting the CCS mode, we encounter a fence timeout:
Fence expiration time out i915-0000:03:00.0:clpeak[2387]:2!
Fixes: 6db31251bb ("drm/i915/gt: Enable only one CCS for compute workload")
Reported-by: Gnattu OC <gnattuoc@me.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Tested-by: Gnattu OC <gnattuoc@me.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Krzysztof Gibala <krzysztof.gibala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426000723.229296-1-andi.shyti@linux.intel.com
(cherry picked from commit 4cfca03f76)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We missed setting the CCS mode during resume and engine resets.
Create a workaround to be added in the engine's workaround list.
This workaround sets the XEHP_CCS_MODE value at every reset.
The issue can be reproduced by running:
$ clpeak --kernel-latency
Without resetting the CCS mode, we encounter a fence timeout:
Fence expiration time out i915-0000:03:00.0:clpeak[2387]:2!
Fixes: 2bebae0112 ("drm/i915/gt: Enable only one CCS for compute workload")
Reported-by: Gnattu OC <gnattuoc@me.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Tested-by: Gnattu OC <gnattuoc@me.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Krzysztof Gibala <krzysztof.gibala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426000723.229296-1-andi.shyti@linux.intel.com
UAPI Changes:
- drm/i915/guc: Use context hints for GT frequency
Allow user to provide a low latency context hint. When set, KMD
sends a hint to GuC which results in special handling for this
context. SLPC will ramp the GT frequency aggressively every time
it switches to this context. The down freq threshold will also be
lower so GuC will ramp down the GT freq for this context more slowly.
We also disable waitboost for this context as that will interfere with
the strategy.
We need to enable the use of SLPC Compute strategy during init, but
it will apply only to contexts that set this bit during context
creation.
Userland can check whether this feature is supported using a new param-
I915_PARAM_HAS_CONTEXT_FREQ_HINT. This flag is true for all guc submission
enabled platforms as they use SLPC for frequency management.
The Mesa usage model for this flag is here -
https://gitlab.freedesktop.org/sushmave/mesa/-/commits/compute_hint
- drm/i915/gt: Enable only one CCS for compute workload
Enable only one CCS engine by default with all the compute sices
allocated to it.
While generating the list of UABI engines to be exposed to the
user, exclude any additional CCS engines beyond the first
instance
***
NOTE: This W/A will make all DG2 SKUs appear like single CCS SKUs by
default to mitigate a hardware bug. All the EUs will still remain
usable, and all the userspace drivers have been confirmed to be able
to dynamically detect the change in number of CCS engines and adjust.
For the smaller percent of applications that get perf benefit from
letting the userspace driver dispatch across all 4 CCS engines we will
be introducing a sysfs control as a later patch to choose 4 CCS each
with 25% EUs (or 50% if 2 CCS).
NOTE: A regression has been reported at
https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895
However Andi has been triaging the issue and we're closing in a fix
to the gap in the W/A implementation:
https://lists.freedesktop.org/archives/intel-gfx/2024-April/348747.html
Driver Changes:
- Add new and fix to existing workarounds: Wa_14018575942 (MTL),
Wa_16019325821 (Gen12.70), Wa_14019159160 (MTL), Wa_16015675438,
Wa_14020495402 (Gen12.70) (Tejas, John, Lucas)
- Fix UAF on destroy against retire race and remove two earlier
partial fixes (Janusz)
- Limit the reserved VM space to only the platforms that need it (Andi)
- Reset queue_priority_hint on parking for execlist platforms (Chris)
- Fix gt reset with GuC submission is disabled (Nirmoy)
- Correct capture of EIR register on hang (John)
- Remove usage of the deprecated ida_simple_xx() API
- Refactor confusing __intel_gt_reset() (Nirmoy)
- Fix the fix for GuC reset lock confusion (John)
- Simplify/extend platform check for Wa_14018913170 (John)
- Replace dev_priv with i915 (Andi)
- Add and use gt_to_guc() wrapper (Andi)
- Remove bogus null check (Rodrigo, Dan)
. Selftest improvements (Janusz, Nirmoy, Daniele)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZitVBTvZmityDi7D@jlahtine-mobl.ger.corp.intel.com
Currently intel_gt_reset() kills the GuC and then resets requested
engines. This is problematic because there is a dedicated CSB FIFO
which only GuC can access and if that FIFO fills up, the hardware
will block on the next context switch until there is space that means
the system is effectively hung. If an engine is reset whilst actively
executing a context, a CSB entry will be sent to say that the context
has gone idle. Thus if reset happens on a very busy system then
killing GuC before killing the engines will lead to deadlock because
of filled up CSB FIFO.
To address this issue, the GuC should be killed only after resetting
the requested engines and before calling intel_gt_init_hw().
v2: Improve commit message(John)
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422201951.633-2-nirmoy.das@intel.com
__intel_gt_reset() is really for resetting engines though
the name might suggest something else. So add a helper function
to remove confusions with no functional changes.
v2: Move intel_gt_reset_all_engines() next to
intel_gt_reset_engine() to make diff simple(John)
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422201951.633-1-nirmoy.das@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmYlapoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGJLgH/RFrsXefpxAWACJv
wRmIx/YFjI3Z4nypBZPXysX/JOuf/cf4bR22jMHC1vhQDtxVgB7eUpEYx0C0Y5RD
ll7cunAZCpP+PB725/bOWbaF94eigl8xC4RrKPon4tG1CS9NAvCJFDyNgWpqh48s
sSKKae68a16zMtIX5Za8nvmsBQOeD67ZFBgI4m7wIDDhTXY3XlG84r8Rz/ZwcdE/
rExFkDMUqjpoJVAMBtETQNk4pvKZVMrW2B0f/xZSR+IKXw5l2FO0raXkIG/6TERs
CxJvCuUjKIosqFLIK2O/cU9G+5V2axZ/WD8YRwDr2vlnnOPht+dFQzyPcuSqezbG
ShIhQo8=
=GI5F
-----END PGP SIGNATURE-----
Backmerge tag 'v6.9-rc5' into drm-next
Linux 6.9-rc5
I've had a persistent msm failure on clang, and the fix is in fixes
so just pull it back to fix that.
Signed-off-by: Dave Airlie <airlied@redhat.com>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7108c1871c6cb08d403c4fa6534bc7e6de4cb23d.1705245316.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The previous fix for the circlular lock splat about the busyness
worker wasn't quite complete. Even though the reset-in-progress flag
is cleared at the start of intel_uc_reset_finish, the entire function
is still inside the reset mutex lock. Not sure why the patch appeared
to fix the issue both locally and in CI. However, it is now back
again.
There is a further complication that the wedge code path within
intel_gt_reset() jumps around so much that it results in nested
reset_prepare/_finish calls. That is, the call sequence is:
intel_gt_reset
| reset_prepare
| __intel_gt_set_wedged
| | reset_prepare
| | reset_finish
| reset_finish
The nested finish means that even if the clear of the in-progress flag
was moved to the end of _finish, it would still be clear for the
entire second call. Surprisingly, this does not seem to be causing any
other problems at present.
As an aside, a wedge on fini does not call the finish functions at
all. The reset_in_progress flag is left set (twice).
So instead of trying to cancel the worker anywhere at all in the reset
path, just add a cancel to intel_guc_submission_fini instead. Note
that it is not a problem if the worker is still active during a reset.
Either it will run before the reset path starts locking things and
will simply block the reset code for a tiny amount of time. Or it will
run after the locks have been acquired and will early exit due to the
try-lock.
Also, do not use the reset-in-progress flag to decide whether a
synchronous cancel is safe (from a lockdep perspective) or not.
Instead, use the actual reset mutex state (both the genuine one and
the custom rolled BACKOFF one).
Fixes: 0e00a8814e ("drm/i915/guc: Avoid circular locking issue on busyness flush")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240329235306.1559639-1-John.C.Harrison@Intel.com
(cherry picked from commit 3563d85531)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The previous fix for the circlular lock splat about the busyness
worker wasn't quite complete. Even though the reset-in-progress flag
is cleared at the start of intel_uc_reset_finish, the entire function
is still inside the reset mutex lock. Not sure why the patch appeared
to fix the issue both locally and in CI. However, it is now back
again.
There is a further complication that the wedge code path within
intel_gt_reset() jumps around so much that it results in nested
reset_prepare/_finish calls. That is, the call sequence is:
intel_gt_reset
| reset_prepare
| __intel_gt_set_wedged
| | reset_prepare
| | reset_finish
| reset_finish
The nested finish means that even if the clear of the in-progress flag
was moved to the end of _finish, it would still be clear for the
entire second call. Surprisingly, this does not seem to be causing any
other problems at present.
As an aside, a wedge on fini does not call the finish functions at
all. The reset_in_progress flag is left set (twice).
So instead of trying to cancel the worker anywhere at all in the reset
path, just add a cancel to intel_guc_submission_fini instead. Note
that it is not a problem if the worker is still active during a reset.
Either it will run before the reset path starts locking things and
will simply block the reset code for a tiny amount of time. Or it will
run after the locks have been acquired and will early exit due to the
try-lock.
Also, do not use the reset-in-progress flag to decide whether a
synchronous cancel is safe (from a lockdep perspective) or not.
Instead, use the actual reset mutex state (both the genuine one and
the custom rolled BACKOFF one).
Fixes: 0e00a8814e ("drm/i915/guc: Avoid circular locking issue on busyness flush")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240329235306.1559639-1-John.C.Harrison@Intel.com
This null check is bogus because we are already using 'ce' stuff
in many places before this function is called.
Having this here is useless and confuses static analyzer tools
that can see:
struct intel_engine_cs *engine = ce->engine;
before this check, in the same function.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202403101225.7AheJhZJ-lkp@intel.com/
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328213107.90632-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Enable only one CCS engine by default with all the compute sices
allocated to it.
While generating the list of UABI engines to be exposed to the
user, exclude any additional CCS engines beyond the first
instance.
This change can be tested with igt i915_query.
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-4-andi.shyti@linux.intel.com
(cherry picked from commit 2bebae0112)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We want a fixed load CCS balancing consisting in all slices
sharing one single user engine. For this reason do not create the
intel_engine_cs structure with its dedicated command streamer for
CCS slices beyond the first.
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-3-andi.shyti@linux.intel.com
(cherry picked from commit c7a5aa4e57)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The hardware should not dynamically balance the load between CCS
engines. Wa_14019159160 recommends disabling it across all
platforms.
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-2-andi.shyti@linux.intel.com
(cherry picked from commit f5d2904cf8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit 9bb66c179f ("drm/i915: Reserve some kernel space per
vm") reduces the available VM space of one page in order to apply
Wa_16018031267 and Wa_16018063123.
This page was reserved indiscrimitely in all platforms even when
not needed. Limit it to DG2 onwards.
Fixes: 9bb66c179f ("drm/i915: Reserve some kernel space per vm")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327200546.640108-1-andi.shyti@linux.intel.com
(cherry picked from commit 9721634441)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Enable only one CCS engine by default with all the compute sices
allocated to it.
While generating the list of UABI engines to be exposed to the
user, exclude any additional CCS engines beyond the first
instance.
This change can be tested with igt i915_query.
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-4-andi.shyti@linux.intel.com
We want a fixed load CCS balancing consisting in all slices
sharing one single user engine. For this reason do not create the
intel_engine_cs structure with its dedicated command streamer for
CCS slices beyond the first.
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-3-andi.shyti@linux.intel.com
The hardware should not dynamically balance the load between CCS
engines. Wa_14019159160 recommends disabling it across all
platforms.
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-2-andi.shyti@linux.intel.com
Commit 9bb66c179f ("drm/i915: Reserve some kernel space per
vm") reduces the available VM space of one page in order to apply
Wa_16018031267 and Wa_16018063123.
This page was reserved indiscrimitely in all platforms even when
not needed. Limit it to DG2 onwards.
Fixes: 9bb66c179f ("drm/i915: Reserve some kernel space per vm")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327200546.640108-1-andi.shyti@linux.intel.com
Applying WA 14018575942 only on Compute engine has impact on
some apps like chrome. Updating this WA to apply on Render
engine as well as it is helping with performance on Chrome.
Note: There is no concern from media team thus not applying
WA on media engines. We will revisit if any issues reported
from media team.
V2(Matt):
- Use correct WA number
Fixes: 668f37e1ee ("drm/i915/mtl: Update workaround 14018778641")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228103738.2018458-1-tejas.upadhyay@intel.com
(cherry picked from commit 7127128017)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With both XEHPSDV and PVC removed (as platforms, most of their code
remain used by others), there's no need to handle !RCS_MASK() as
other platforms don't ever have fused-off render. Remove those code
paths and the special WA flag when initializing GuC.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-7-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
PCI IDs for PVC were never added and platform always marked with
force_probe. Drop what's not used and rename some places as needed.
The registers not used anymore are also removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
With no platform using graphics/media IP_VER(12, 50), replace the
checks throughout the code with IP_VER(12, 55) so the code makes sense
by itself with no additional explanation of previous baggage.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
PCI IDs for XEHPSDV were never added and platform always marked with
force_probe. Drop what's not used and rename some places to either be
xehp or dg2, depending on the platform/IP checks.
The registers not used anymore are also removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
With dynamic load-balancing disabled on the compute side, there's no
reason left to enable WA 16015675438. Drop it from both PVC and DG2.
Note that this can be done because now the driver always set a fixed
partition of EUs during initialization via the ccs_mode configuration.
The flag to GuC is still needed because of 18020744125, so update
the comment accordingly.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Mateusz Jablonski <mateusz.jablonski@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306144723.1826977-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Use the new w/a KLV support to enable a MTL w/a. Note, this w/a is a
super-set of Wa_16019325821, so requires turning that one as well as
setting the new flag for Wa_14019159160 itself.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223205632.1621019-4-John.C.Harrison@Intel.com
Allow user to provide a low latency context hint. When set, KMD
sends a hint to GuC which results in special handling for this
context. SLPC will ramp the GT frequency aggressively every time
it switches to this context. The down freq threshold will also be
lower so GuC will ramp down the GT freq for this context more slowly.
We also disable waitboost for this context as that will interfere with
the strategy.
We need to enable the use of SLPC Compute strategy during init, but
it will apply only to contexts that set this bit during context
creation.
Userland can check whether this feature is supported using a new param-
I915_PARAM_HAS_CONTEXT_FREQ_HINT. This flag is true for all guc submission
enabled platforms as they use SLPC for frequency management.
The Mesa usage model for this flag is here -
https://gitlab.freedesktop.org/sushmave/mesa/-/commits/compute_hint
v2: Rename flags as per review suggestions (Rodrigo, Tvrtko).
Also, use flag bits in intel_context as it allows finer control for
toggling per engine if needed (Tvrtko).
v3: Minor review comments (Tvrtko)
v4: Update comment (Sushma)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ivan Briano <ivan.briano@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306012759.204938-1-vinay.belgaumkar@intel.com
Applying WA 14018575942 only on Compute engine has impact on
some apps like chrome. Updating this WA to apply on Render
engine as well as it is helping with performance on Chrome.
Note: There is no concern from media team thus not applying
WA on media engines. We will revisit if any issues reported
from media team.
V2(Matt):
- Use correct WA number
Fixes: 668f37e1ee ("drm/i915/mtl: Update workaround 14018778641")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228103738.2018458-1-tejas.upadhyay@intel.com
The above w/a is required for every platform that the i915 driver
supports. It is fixed on the latest platforms but they are only
supported by Xe instead of i915. So just remove the platform check
completely and keep the code simple.
v2: Add extra comment (review feedback from Rodrigo).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223202846.1532176-1-John.C.Harrison@Intel.com
While trying to reproduce some other issues reported by CI for i915
hangcheck live selftest, I found them hidden behind timeout failures
reported by igt_hang_sanitycheck -- the very first hangcheck test case
executed.
Feb 22 19:49:06 DUT1394ACMR kernel: calling mei_gsc_driver_init+0x0/0xff0 [mei_gsc] @ 121074
Feb 22 19:49:06 DUT1394ACMR kernel: i915 0000:03:00.0: [drm] DRM_I915_DEBUG enabled
Feb 22 19:49:06 DUT1394ACMR kernel: i915 0000:03:00.0: [drm] Cannot find any crtc or sizes
Feb 22 19:49:06 DUT1394ACMR kernel: probe of i915.mei-gsc.768 returned 0 after 1475 usecs
Feb 22 19:49:06 DUT1394ACMR kernel: probe of i915.mei-gscfi.768 returned 0 after 1441 usecs
Feb 22 19:49:06 DUT1394ACMR kernel: initcall mei_gsc_driver_init+0x0/0xff0 [mei_gsc] returned 0 after 3010 usecs
Feb 22 19:49:06 DUT1394ACMR kernel: i915 0000:03:00.0: [drm] DRM_I915_DEBUG_GEM enabled
Feb 22 19:49:06 DUT1394ACMR kernel: i915 0000:03:00.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
Feb 22 19:49:06 DUT1394ACMR kernel: i915: Performing live selftests with st_random_seed=0x4c26c048 st_timeout=500
Feb 22 19:49:07 DUT1394ACMR kernel: i915: Running hangcheck
Feb 22 19:49:07 DUT1394ACMR kernel: calling mei_hdcp_driver_init+0x0/0xff0 [mei_hdcp] @ 121074
Feb 22 19:49:07 DUT1394ACMR kernel: i915: Running intel_hangcheck_live_selftests/igt_hang_sanitycheck
Feb 22 19:49:07 DUT1394ACMR kernel: probe of 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04 returned 0 after 1398 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: probe of i915.mei-gsc.768-b638ab7e-94e2-4ea2-a552-d1c54b627f04 returned 0 after 97 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: initcall mei_hdcp_driver_init+0x0/0xff0 [mei_hdcp] returned 0 after 101960 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: calling mei_pxp_driver_init+0x0/0xff0 [mei_pxp] @ 121094
Feb 22 19:49:07 DUT1394ACMR kernel: probe of 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1 returned 0 after 435 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: mei_pxp i915.mei-gsc.768-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:03:00.0 (ops i915_pxp_tee_component_ops [i915])
Feb 22 19:49:07 DUT1394ACMR kernel: 100ms wait for request failed on rcs0, err=-62
Feb 22 19:49:07 DUT1394ACMR kernel: probe of i915.mei-gsc.768-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1 returned 0 after 158425 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: initcall mei_pxp_driver_init+0x0/0xff0 [mei_pxp] returned 0 after 224159 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: i915/intel_hangcheck_live_selftests: igt_hang_sanitycheck failed with error -5
Feb 22 19:49:07 DUT1394ACMR kernel: i915: probe of 0000:03:00.0 failed with error -5
Those request waits, once timed out after 100ms, have never been
confirmed to still persist over another 100ms, always being able to
complete within the originally requested wait time doubled.
Taking into account potentially significant additional concurrent workload
generated by new auxiliary drivers that didn't exist before and now are
loaded in parallel with the i915 module also when loaded in selftest mode,
relax our expectations on time consumed by the sanity check request before
it completes.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228152500.38267-2-janusz.krzysztofik@linux.intel.com
The EIR register (0x20B0) was being included in the engine class list
for render and compute as the absolute register address. However, it
is actually a ring register available on all engines at an offset of
(base) + 0xB0. As it was included as an RCS engine but with the
absolute address, GuC was adding on another 0x2000 and coming out at
an invalid location. Thus it would reject the register and complain
about only managing a partial capture.
So update the list to use the RING_EIR version of the register and
include it for all engines.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223203204.1533410-1-John.C.Harrison@Intel.com
We already have guc_to_gt() and getting to guc from the GT it
requires some mental effort. Add the gt_to_guc().
Given the reference to the "gt", the gt_to_guc() will return the
pinter to the "guc".
Update all the files under the gt/ directory.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229102734.674362-2-andi.shyti@linux.intel.com
Request can be NULL if no guilty request was identified so simply use
engine->i915 instead.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: d50892a955 ("drm/i915: switch from drm_debug_printer() to device specific drm_dbg_printer()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20240219131423.1854991-1-tvrtko.ursulin@linux.intel.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
intel_guc::ads_engine_usage_size was never used since its addition in
commit 77cdd054dd (drm/i915/pmu: Connect engine busyness stats from
GuC to pmu). Drop it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-9-jirislaby@kernel.org
The context persistence code does things like send super high priority
heartbeat pulses to ensure any leaked context can still be pre-empted
and thus isn't a total denial of service but only a minor denial of
service. Unfortunately, it wasn't bothering to restart the heartbeat
worker with a fresh timeout. Thus, if a persistent context happened to
be closed just before the heartbeat was going to go ping anyway then
the forced pulse would get a negligble execution time. And as the
forced pulse is super high priority, the worker thread's next step is
a reset. Which means a potentially innocent system randomly goes boom
when attempting to close a context. So, force a re-schedule of the
worker thread with the appropriate timeout.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110210216.4125092-1-John.C.Harrison@Intel.com
Sometimes gt_pm live_rc6_manual selftest fails due to no power being
measured for the rc6 disabled period. Therefore increasing the rc6 disable
period from 250ms to 1000ms to rule out such sporadic failure.
v3:
- More descriptive and improved commit message (Anshuman)
Signed-off-by: Anirban Sk <sk.anirban@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212050738.1162198-1-sk.anirban@intel.com
0x108100 and 0x1080c0 have been around since snb. Rename the
defines appropriately.
v2: Rebase
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-7-ville.syrjala@linux.intel.com
Now that the GGTT PTE updates go straight to GSMBASE (bypassing
GTTMMADR) there should be no more risk of system hangs? So the
"binder" (ie. update the PTEs via MI_UPDATE_GTT) is no longer
necessary, disable it.
My main worry with the MI_UPDATE_GTT are:
- only used on this one platform so very limited testing coverage
- async so more opprtunities to screw things up
- what happens if the engine hangs while we're waiting for MI_UPDATE_GTT
to finish?
- requires working command submission, so even getting a working
display now depends on a lot more extra components working correctly
TODO: MI_UPDATE_GTT might be interesting as an optimization
though, so perhaps someone should look into always using it
(assuming the GPU is alive and well)?
v2: Keep using MI_UPDATE_GTT on VM guests
v3: use i915_direct_stolen_access()
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-6-ville.syrjala@linux.intel.com
On MTL accessing stolen memory via the BARs is somehow borked,
and it can hang the machine. As a workaround let's bypass the
BARs and just go straight to DSMBASE/GSMBASE instead.
Note that on every other platform this itself would hang the
machine, but on MTL the system firmware is expected to relax
the access permission guarding stolen memory to enable this
workaround, and thus direct CPU accesses should be fine.
The raw stolen memory areas won't be passed to VMs so we'll
need to risk using the BAR there for the initial setup. Once
command submission is up we should switch to MI_UPDATE_GTT
which at least shouldn't hang the whole machine.
v2: Don't use direct GSM/DSM access on guests
Add w/a number
v3: Check register 0x138914 to see if pcode did its job
Add some debug prints
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-5-ville.syrjala@linux.intel.com
Now that intel_memory_regions_hw_probe() prints out each and every
memory region there's no reason to have ad-hoc debugs to do similar
things elsewhere.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-4-ville.syrjala@linux.intel.com
mem->region is a struct resource, but mem->io_start and
mem->io_size are not for whatever reason. Let's unify this
and convert the io stuff into a struct resource as well.
Should make life a little less annoying when you don't have
juggle between two different approaches all the time.
Mostly done using cocci (with manual tweaks at all the
places where we mutate io_size by hand):
@@
struct intel_memory_region *M;
expression START, SIZE;
@@
- M->io_start = START;
- M->io_size = SIZE;
+ M->io = DEFINE_RES_MEM(START, SIZE);
@@
struct intel_memory_region *M;
@@
- M->io_start
+ M->io.start
@@
struct intel_memory_region M;
@@
- M.io_start
+ M.io.start
@@
expression M;
@@
- M->io_size
+ resource_size(&M->io)
@@
expression M;
@@
- M.io_size
+ resource_size(&M.io)
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-2-ville.syrjala@linux.intel.com
The sysfs file is named 'enabled', thus users might want to know the
true state of the RC6 instead of only the indication if the RC6
should be enabled.
Let's use rc6.enable directly instead of rc6.supported.
Signed-off-by: Juan Escamilla <jcescami@wasd.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240116172922.3460695-1-jcescami@wasd.net
Some of our existing Xe_LPG workarounds and tuning are also applicable
to the version 12.74 variant. Extend the condition bounds accordingly.
Also fix the comment on Wa_14018575942 while we're at it.
v2: Extend some more workarounds (Harish)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108122738.14399-4-haridhar.kalvala@intel.com
Xe_LPG+ (IP version 12.74) should take the same general code
paths as Xe_LPG (versions 12.70 and 12.71).
Xe_LPG+'s workaround list will be handled by the next patch.
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108122738.14399-3-haridhar.kalvala@intel.com
Currently if rc6 is supported, it gets enabled and the sysfs files for
rc6_enable_show and rc6_enable_dev_show uses masks to check information
from drm_i915_private.
However rc6_support functions take more variables and conditions into
consideration and thus these masks are not enough for most of the modern
hardware and it is simpley lyting to the user.
Let's fix it by at least use the rc6.supported flag from intel_gt
information.
Signed-off-by: Juan Escamilla <jcescami@wasd.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110010302.553597-1-jcescami@wasd.net
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'num_guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_bitmap' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_id_list' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_in_use' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_contexts' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_mask' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_delay_ms' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_gucid_threshold' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'gt_stamp' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'ping_delay' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'work' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'shift' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'last_stat_jiffies' description in 'intel_guc'
18 warnings as Errors
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-3-rdunlap@infradead.org
(cherry picked from commit e4cf1a70fa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Avoid the following lockdep complaint:
<4> [298.856498] ======================================================
<4> [298.856500] WARNING: possible circular locking dependency detected
<4> [298.856503] 6.7.0-rc5-CI_DRM_14017-g58ac4ffc75b6+ #1 Tainted: G
N
<4> [298.856505] ------------------------------------------------------
<4> [298.856507] kworker/4:1H/190 is trying to acquire lock:
<4> [298.856509] ffff8881103e9978 (>->reset.backoff_srcu){++++}-{0:0}, at:
_intel_gt_reset_lock+0x35/0x380 [i915]
<4> [298.856661]
but task is already holding lock:
<4> [298.856663] ffffc900013f7e58
((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at:
process_scheduled_works+0x264/0x530
<4> [298.856671]
which lock already depends on the new lock.
The complaint is not actually valid. The busyness worker thread does
indeed hold the worker lock and then attempt to acquire the reset lock
(which may have happened in reverse order elsewhere). However, it does
so with a trylock that exits if the reset lock is not available
(specifically to prevent this and other similar deadlocks).
Unfortunately, lockdep does not understand the trylock semantics (the
lock is an i915 specific custom implementation for resets).
Not doing a synchronous flush of the worker thread when a reset is in
progress resolves the lockdep splat by never even attempting to grab
the lock in this particular scenario.
There are situatons where a synchronous cancel is required, however.
So, always do the synchronous cancel if not in reset. And add an extra
synchronous cancel to the end of the reset flow to account for when a
reset is occurring at driver shutdown and the cancel is no longer
synchronous but could lead to unallocated memory accesses if the
worker is not stopped.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219195957.212600-1-John.C.Harrison@Intel.com
If we are at the end of suspend or very early in resume
its possible an async fence signal (via rcu_call) is triggered
to free_engines which could lead us to the execution of
the context destruction worker (after a prior worker flush).
Thus, when suspending, insert rcu_barriers at the start
of i915_gem_suspend (part of driver's suspend prepare) and
again in i915_gem_suspend_late so that all such cases have
completed and context destruction list isn't missing anything.
In destroyed_worker_func, close the race against CT-loss
by checking that CT is enabled before calling into
deregister_destroyed_contexts.
Based on testing, guc_lrc_desc_unpin may still race and fail
as we traverse the GuC's context-destroy list because the
CT could be disabled right before calling GuC's CT send function.
We've witnessed this race condition once every ~6000-8000
suspend-resume cycles while ensuring workloads that render
something onscreen is continuously started just before
we suspend (and the workload is small enough to complete
and trigger the queued engine/context free-up either very
late in suspend or very early in resume).
In such a case, we need to unroll the entire process because
guc-lrc-unpin takes a gt wakeref which only gets released in
the G2H IRQ reply that never comes through in this corner
case. Without the unroll, the taken wakeref is leaked and will
cascade into a kernel hang later at the tail end of suspend in
this function:
intel_wakeref_wait_for_idle(>->wakeref)
(called by) - intel_gt_pm_wait_for_idle
(called by) - wait_for_suspend
Thus, do an unroll in guc_lrc_desc_unpin and deregister_destroyed_-
contexts if guc_lrc_desc_unpin fails due to CT send falure.
When unrolling, keep the context in the GuC's destroy-list so
it can get picked up on the next destroy worker invocation
(if suspend aborted) or get fully purged as part of a GuC
sanitization (end of suspend) or a reset flow.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Tested-by: Mousumi Jana <mousumi.jana@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229215143.581619-1-alan.previn.teres.alexis@intel.com
When suspending, flush the context-guc-id
deregistration worker at the final stages of
intel_gt_suspend_late when we finally call gt_sanitize
that eventually leads down to __uc_sanitize so that
the deregistration worker doesn't fire off later as
we reset the GuC microcontroller.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Mousumi Jana <mousumi.jana@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231228045558.536585-2-alan.previn.teres.alexis@intel.com
A failure to load the HuC is occasionally observed where the cause is
believed to be a low GT frequency leading to very long load times.
So a) increase the timeout so that the user still gets a working
system even in the case of slow load. And b) report the frequency
during the load to see if that is the cause of the slow down.
Also update the similar code on the GuC load to not use uncore->gt
when there is a local gt available. The two should match, but no need
for unnecessary de-referencing.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102222202.310495-1-John.C.Harrison@Intel.com
WA 14019877138 needed for Graphics 12.70/71 both
V2(Jani):
- Use drm/i915
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103053111.763172-1-tejas.upadhyay@intel.com
Some of the wa registers are MCR register, and EU_PERF_CNTL registers
are MCR register.
MCR register needs extra process for read/write.
As normal MMIO register also could work with the MCR register process,
change all wa registers to MCR type for code simplicity.
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102010231.843778-1-shuicheng.lin@intel.com
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'num_guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_bitmap' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_id_list' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_in_use' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_contexts' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_mask' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_delay_ms' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_gucid_threshold' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'gt_stamp' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'ping_delay' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'work' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'shift' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'last_stat_jiffies' description in 'intel_guc'
18 warnings as Errors
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-3-rdunlap@infradead.org
The use of kmap_atomic() is being deprecated in favor of
kmap_local_page()[1], and this patch converts the call from
kmap_atomic() to kmap_local_page().
The main difference between atomic and local mappings is that local
mappings doesn't disable page faults or preemption (the preemption is
disabled for !PREEMPT_RT case, otherwise it only disables migration).
With kmap_local_page(), we can avoid the often unwanted side effect of
unnecessary page faults or preemption disables.
In drm/i915/gt/uc/intel_us_fw.c, the function intel_uc_fw_copy_rsa()
just use the mapping to do memory copy so it doesn't need to disable
pagefaults and preemption for mapping. Thus the local mapping without
atomic context (not disable pagefaults / preemption) is enough.
Therefore, intel_uc_fw_copy_rsa() is a function where the use of
memcpy_from_page() with kmap_local_page() in place of memcpy() with
kmap_atomic() is correctly suited.
Convert the calls of memcpy() with kmap_atomic() / kunmap_atomic() to
memcpy_from_page() which uses local mapping to copy.
[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com/T/#u
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203132947.2328805-8-zhao1.liu@linux.intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmV2PMQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgQIAKSdjtpkv+IeDwph
umLHxDlCTT8nl+TAhEYuxSdMiHt1i7+zyF0snnHhGthBRnBZBf+PDdkQOmqtjLZj
e591VGY7tdNCAVUwmRRaI82JFz9Pl1k8DXL3f+CE1+MfbpsirAecoIAL0rsvg+4f
ICKSAOBZonL7GT7IGrsbxgqGKCLC+2PcgNT4pADBdjtbC1nmVSLK21dtWr6i4xsn
CT9MxAnej1+EOpreyHhNZUVqfQy0/04x4OY0u/EOXU3PgpfGTrAzkyfwzcd/eit0
x59TZ0owDVXfvvdXUUAC0zG1th2ek5LKNtL+C4rKOoAbq7GZoQfjN5M/Ug+yykwE
aqm6CJ8=
=tZ+R
-----END PGP SIGNATURE-----
Backmerge tag 'v6.7-rc5' into drm-next
Linux 6.7-rc5
Alex requested this for some amdkfd work relying on the symbols exports.
Signed-off-by: Dave Airlie <airlied@redhat.com>
After i915_active_unlock_wait i915_active can be still non-idle due
to barrier async handling in signal_irq_work. As a result one can observe
following errors:
bcs0: heartbeat pulse did not flush idle tasks
*ERROR* pulse active pulse_active [i915]:pulse_retire [i915]
*ERROR* pulse count: 0
*ERROR* pulse preallocated barriers? no
To prevent it let's wait explicitly for idleness.
v2: wait only in live_idle tests
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205-selftest_wait_for_active_idle_event-v2-1-1437d0bf9829@intel.com
Commit 503579448d ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
made the GSC0 engine not have a valid uabi class and so broke the engine
reset counting, which in turn was made class based in cb823ed991 ("drm/i915/gt: Use intel_gt as the primary object for handling resets").
Despite the title and commit text of the latter is not mentioning it (and
has left the storage array incorrectly sized), tracking by class, despite
it adding aliasing in hypthotetical multi-tile systems, is handy for
virtual engines which for instance do not have a valid engine->id.
Therefore we keep that but just change it to use the internal class which
is always valid. We also add a helper to increment the count, which
aligns with the existing getter.
What was broken without this fix were out of bounds reads every time a
reset would happen on the GSC0 engine, or during selftests when storing
and cross-checking the counts in igt_live_test_begin and
igt_live_test_end.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: dfed6b58d5 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
[tursulin: fixed Fixes tag]
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-2-tvrtko.ursulin@linux.intel.com
There is a mechanism for reporting errors from fire and forget H2G
messages. This is the only way to find out about almost any error in
the GuC backend submission path. So it would be useful to know that it
is working.
v2: Fix some dumb over-complications and a couple of typos - review
feedback from Daniele.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114010016.234570-3-John.C.Harrison@Intel.com
Noticed that the hangcheck selftest is submitting a non-preemptoble
spinner. That means that even if the GuC does not die, the heartbeat
will still kick in and trigger a reset. Which is rather defeating the
purpose of the test - to verify that the heartbeat will kick in if the
GuC itself has died. The test is deliberately killing the GuC, so it
should never hit the case of a non-dead GuC. But it is not impossible
that the kill might fail at some future point due to other driver
re-work.
So, make the spinner pre-emptible. That way the heartbeat can get
through if the GuC is alive and context switching. Thus a reset only
happens if the GuC dies. Thus, if the kill should stop working the
test will now fail rather than claim to pass.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114010016.234570-2-John.C.Harrison@Intel.com
Debugging PXP issues can't even begin without understanding precedding
sequence of important events. Add drm_dbg into the most important PXP
events.
v5 : - rebase.
v4 : - rebase.
v3 : - move gt_dbg to after mutex block in function
i915_gsc_proxy_component_bind. (Vivaik)
v2 : - remove __func__ since drm_dbg covers that (Jani).
- add timeout dbg of the restart from front-end (Alan).
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122191523.58379-1-alan.previn.teres.alexis@intel.com
The GSC CS is not exposed to the user, so we skipped assigning a uabi
class number for it. However, the trace logs use the uabi class and
instance to identify the engine, so leaving uabi class unset makes the
GSC CS show up as the RCS in those logs.
Given that the engine is not exposed to the user, we can't add a new
case in the uabi enum, so we insted internally define a kernel
internal class as -1.
At the same time remove special handling for the name and complete
the uabi_classes array so internal class is automatically correctly
assigned.
Engine will show as 65535:0 other0 in the logs/traces which should
be unique enough.
v2:
* Fix uabi class u8 vs u16 type confusion.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 194babe26b ("drm/i915/mtl: don't expose GSC command streamer to the user")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116084456.291533-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit dfed6b58d5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmVkFCUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG2e4IAIMMxdUGC1RDpSk2
cNe2XfULYD8pNDT9Io6668jELSfFQe8ELv4QloFwDDCKk2EDZUZxr3crIX9rweYI
D5xrAwY5uJQnAsRADEmWMUN0iWo3EX3G5OOUkJknGWvyPapByFvhDzzF2nZQ25xI
HjJ9b0OTOVJxDYspCtK0g+CGFtBjCiGpLSe/V67zlLX4ptWh5noqPWQE9/dyyIFD
Z2Jga3wQtsF1uvOx4g0tMzowTqaKMljf5R3t6LNT4yqmoxMdKGi4qgJQDp23vB36
KNmA/V4wQ+EDuD3QejebpuMCgZV7lYJxOlWtGt47/cF9z8wSp+8J92TUSzP23D4u
5yx5ihs=
=2beF
-----END PGP SIGNATURE-----
Merge v6.7-rc3 into drm-next
Thomas Zimermann needs 8d6ef26501 ("drm/ast: Disconnect BMC if
physical connector is connected") for further ast work in -next.
Minor conflicts in ivpu between 3de6d95978 ("accel/ivpu: Pass D0i3
residency time to the VPU firmware") and 3f7c063492
("accel/ivpu/37xx: Fix hangs related to MMIO reset") changing adjacent
lines.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Track every intel_gt_pm_get() until its corresponding release in
intel_gt_pm_put() by returning a cookie to the caller for acquire that
must be passed by on released. When there is an imbalance, we can see who
either tried to free a stale wakeref, or who forgot to free theirs.
v2: track recently added calls in gen8_ggtt_bind_get_ce and
destroyed_worker_func
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030-ref_tracker_i915-v1-2-006fe6b96421@intel.com
The GSC CS is not exposed to the user, so we skipped assigning a uabi
class number for it. However, the trace logs use the uabi class and
instance to identify the engine, so leaving uabi class unset makes the
GSC CS show up as the RCS in those logs.
Given that the engine is not exposed to the user, we can't add a new
case in the uabi enum, so we insted internally define a kernel
internal class as -1.
At the same time remove special handling for the name and complete
the uabi_classes array so internal class is automatically correctly
assigned.
Engine will show as 65535:0 other0 in the logs/traces which should
be unique enough.
v2:
* Fix uabi class u8 vs u16 type confusion.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 194babe26b ("drm/i915/mtl: don't expose GSC command streamer to the user")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116084456.291533-1-tvrtko.ursulin@linux.intel.com
The only task of intel_gt_release_all is to zero gt table. Calling
it on error path prevents intel_gt_driver_late_release_all (called from
i915_driver_late_release) to cleanup GTs, causing leakage.
After i915_driver_late_release GT array is not used anymore so
it does not need cleaning at all.
Sample leak report:
BUG i915_request (...): Objects remaining in i915_request on __kmem_cache_shutdown()
...
Object 0xffff888113420040 @offset=64
Allocated in __i915_request_create+0x75/0x610 [i915] age=18339 cpu=1 pid=1454
kmem_cache_alloc+0x25b/0x270
__i915_request_create+0x75/0x610 [i915]
i915_request_create+0x109/0x290 [i915]
__engines_record_defaults+0xca/0x440 [i915]
intel_gt_init+0x275/0x430 [i915]
i915_gem_init+0x135/0x2c0 [i915]
i915_driver_probe+0x8d1/0xdc0 [i915]
v2: removed whole intel_gt_release_all
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8489
Fixes: bec68cc9ea ("drm/i915: Prepare for multiple GTs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115-dont_clean_gt_on_error_path-v2-1-54250125470a@intel.com
(cherry picked from commit e899505533)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 78cc55e0b6 ("drm/i915/mcr: Hold GT forcewake during steering
operations") introduced the workaround which was in early stages. With a
valid lineage number update Workaround for future tracking.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116212511.1760446-1-radhakrishna.sripada@intel.com
On MTL, the HuC is only supported on the media GT, so our validation
check on the module parameter detects an inconsistency on the root GT
(the modparams asks to enable HuC, but the support is not there) and
prints the following info message:
[drm] GT0: Incompatible option enable_guc=3 - HuC is not supported!
This can be confusing to the user and make them think that something is
wrong when it isn't, so we need to silence it.
Given that any platform that supports HuC also supports GuC, if a user
tries to enable HuC on a platform that really doesn't support it they'll
already see a message about GuC not being supported, so instead of just
silencing the HuC message on newer platforms we can just get rid of it
entirely.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109235436.2349963-1-daniele.ceraolospurio@intel.com
The only task of intel_gt_release_all is to zero gt table. Calling
it on error path prevents intel_gt_driver_late_release_all (called from
i915_driver_late_release) to cleanup GTs, causing leakage.
After i915_driver_late_release GT array is not used anymore so
it does not need cleaning at all.
Sample leak report:
BUG i915_request (...): Objects remaining in i915_request on __kmem_cache_shutdown()
...
Object 0xffff888113420040 @offset=64
Allocated in __i915_request_create+0x75/0x610 [i915] age=18339 cpu=1 pid=1454
kmem_cache_alloc+0x25b/0x270
__i915_request_create+0x75/0x610 [i915]
i915_request_create+0x109/0x290 [i915]
__engines_record_defaults+0xca/0x440 [i915]
intel_gt_init+0x275/0x430 [i915]
i915_gem_init+0x135/0x2c0 [i915]
i915_driver_probe+0x8d1/0xdc0 [i915]
v2: removed whole intel_gt_release_all
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8489
Fixes: bec68cc9ea ("drm/i915: Prepare for multiple GTs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115-dont_clean_gt_on_error_path-v2-1-54250125470a@intel.com
Trace requires new-line at the end of message (in opposition to printk),
otherwise trace dump becomes messy.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115-eols-v1-1-d47a2f52b807@intel.com
We read RENDER_HEAD as a part of the flush. If GT is in
deeper sleep states, this could lead to read errors since we are
not using a forcewake. Safer to read a shadowed register instead.
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109192148.475156-1-vinay.belgaumkar@intel.com
- big pile of amd fixes, but mostly hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEb4nG6jLu8Y5XI+PfTA9ye/CYqnEFAmVOlEQACgkQTA9ye/CY
qnGawQ//d7M2CZpd9LvkRnaV2+fG9yGONOwZsG5fVtXrfT4RDQmITC9KMEh2TxJb
s1W6HA+UijMMx6RtQN6cTYNHeYDaX2b55/g3lMnreXydii0COJwkWe52iFn0Dpcm
RpsT5cYLEiRtiTvEzKbrkxS+rrQMu9jwxcA23b+lMkmybVgqQe1m9hYtRxZCFqr7
6BMKOgrCRoY1mYZrNaccXBHvvgOtcpWPOsuNNgjW3MDKB663BmpABT1iDg3xxPdX
BI8SAl6PX6ju2Jwi3WPlscmI199fhcUXDuqb8LXhJsuqynhwU940aUlxcbI7Hz6Y
LaFwSK4OiaIsIC8yisa7cZ1z2mqnMIiGXasP6mfYVmYqpGYMW+AZcOmzui/MLiGd
duOcvK/bLxN7moSqcKgz+mmrLfZzJkPLV8pGEVk0IbTn239AnR76bqrEQJ+Iqukx
d4yLGE4OJchD4zzw5RlVmQIhwA8M/5croJBIo6yNyQB5xgN/Krd4QUc6KjjgzNo8
e402NjaW2/PqWIiPtsL5tK4XdkVtvMvVUq+bJSch6Wfn3j9u06/wgFl1FBRyX7zS
3QYvMtF/QM5/QTpbdl82hSSsJ78iO62tPYSOhycIxgB/BHoc/fap+IOFtKKnT3RZ
xr7UiwAQA043gAMvS+TkZAc6bFW8U8Dzxu5XxEPE1L+WU6XCSbs=
=l45e
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave's VPN to the big machine died, so it's on me to do fixes pr this
and next week while everyone else is at plumbers.
- big pile of amd fixes, but mostly for hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"
* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
drm/amdgpu: fix error handling in amdgpu_vm_init
drm/amdgpu: Fix possible null pointer dereference
drm/amdgpu: move UVD and VCE sched entity init after sched init
drm/amdgpu: move kfd_resume before the ip late init
drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
drm/amdgpu: fix software pci_unplug on some chips
drm/amd/display: remove duplicated argument
drm/amdgpu: correct mca debugfs dump reg list
drm/amdgpu: correct acclerator check architecutre dump
drm/amdgpu: add pcs xgmi v6.4.0 ras support
drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
drm/amdgpu: disable smu v13.0.6 mca debug mode by default
drm/amdgpu: Support multiple error query modes
drm/amdgpu: refine smu v13.0.6 mca dump driver
drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
drm: amd: Resolve Sphinx unexpected indentation warning
...
This workaround applies to all steppings of Xe_LPM+. Implement the KMD
part.
v2:
- Put the definition of VDBOX_CGCTL3F1C() in the correct sort order.
(Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231106201959.156943-1-gustavo.sousa@intel.com
FIXME: It is suspected that some Address Translation Service (ATS)
issue on IOMMU is causing CAT errors to occur on some MTL workloads.
Applying a write barrier to the ppgtt set entry functions appeared
to have no effect, so we must temporarily use I915_MAP_WC in the
map_pt_dma class of functions on MTL until a proper ATS solution is
found.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
CC: Chris Wilson <chris.p.wilson@linux.intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Acked-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102175831.872763-1-jonathan.cavitt@intel.com
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
This workaround is primarily implemented by the BIOS. However if the
BIOS applies the workaround it will reserve a small piece of our DSM
(which should be at the top, right below the WOPCM); we just need to
keep that region reserved so that nothing else attempts to re-use it.
v2: Declare regs in intel_gt_regs.h (Matt Roper)
v3: Shift WA implementation before calculation of *base (Matt Roper)
v4:
- Change condition gscpmi base to be fall in DSM range.(Matt Roper)
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027195052.3676632-1-dnyaneshwar.bhadane@intel.com
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmVAgzYACgkQDHTzWXnE
hr7ZEQ//UXne3tyGOsU3X8r+lstLFDMa90a3hvTg6hX+Q0MjHd/clwkKFkLpkipL
n7gIZlaHl11dRs0FzrIZA5EVAAgjMLKmIl10NBDFec6ZFA3VERcggx8y61uifI15
VviMR1VbLHYZaCdyrQOK0A4wcktWnKXyoXp7cwy9crdc2GOBMUZkdIqtvD7jHxQx
UMIFnzi1CyKUX/Fjt/JceYcNk9y2ZGkzakYO3sHcUdv4DPu9qX4kNzpjF691AZBP
UeKWvCswTRVg2M0kuo/RYIBzqaTmOlk6dHLWBognIeZPyuyhCcaGC2d64c6tShwQ
dtHdi+IgyQ8s2qb350ymKTQUP7xA/DfZBwH7LvrZALBxeQGYQN1CnsgDMOS2wcUc
XrRFiS7PxEOtMMBctcPBnnoV5ttnsLLlPpzM9puh9sUFMn6CgLzcAMqXdqxzMajH
+dz2aD1N0vMqq4varozOg9SC2QamgUiPN/TQfrulhCTCfQaXczy5x1OYiIz65+Sl
mKoe2WASuP9Ve8do4N/wEwH5SZY2ItipBdUTRxttY9NTanmV0X5DjZBXH5b9XGci
Zl5Ar613f9zwm5T5BVA5k6s3ZbGY6QcP5pDNTCPaSgitfFXIdReBZ2CaYzK3MPg/
Wit/TXrud9yT6VPpI1igboMyasf5QubV1MY1K83kOCWr9u8R2CM=
=l79u
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
Set copy engine arbitration into round robin mode
for part of Wa_16018031267 / Wa_16018063123 mitigation.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026-wabb-v6-4-4aa7d55d0a8a@intel.com
Apply WABB blit for Wa_16018031267 / Wa_16018063123.
v3: drop unused enum definition
v4: move selftest to separate patch, use wa only on BCS0.
v5: fixed selftest caller to context_wabb
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026-wabb-v6-2-4aa7d55d0a8a@intel.com
Reserve one page in each vm for kernel space to use for things
such as workarounds.
v2: use real memory, do not decrease vm.total
v4: reserve only one page and explain flag
v5: remove allocated object on ppgtt cleanup
v6: decrease vm->total by reservation size
Suggested-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026-wabb-v6-1-4aa7d55d0a8a@intel.com
gen8_ggtt_invalidate() is only needed for limited set of platforms
where GGTT is mapped as WC. This was added as way to fix WC based GGTT in
commit 0f9b91c754 ("drm/i915: flush system agent TLBs on SNB") and
there are no reference in HW docs that forces us to use this on non-WC
backed GGTT.
This can also cause unwanted side-effects on XE_HP platforms where
GFX_FLSH_CNTL_GEN6 is not valid anymore.
v2: Add a func to detect wc ggtt detection (Ville)
v3: Improve commit log and add reference commit (Daniel)
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v6.2+
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018093815.1349-1-nirmoy.das@intel.com
(cherry picked from commit 81de3e296b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The newly added memset() causes a warning for some reason I could not
figure out:
In file included from arch/x86/include/asm/string.h:3,
from drivers/gpu/drm/i915/gt/intel_rc6.c:6:
In function 'rc6_res_reg_init',
inlined from 'intel_rc6_init' at drivers/gpu/drm/i915/gt/intel_rc6.c:610:2:
arch/x86/include/asm/string_32.h:195:29: error: '__builtin_memset' writing 16 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
195 | #define memset(s, c, count) __builtin_memset(s, c, count)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_rc6.c:584:9: note: in expansion of macro 'memset'
584 | memset(rc6->res_reg, INVALID_MMIO_REG.reg, sizeof(rc6->res_reg));
| ^~~~~~
In function 'intel_rc6_init':
Change it to an normal initializer and an added memcpy() that does not have
this problem.
Fixes: 4bb9ca7ee0 ("drm/i915/mtl: C6 residency and C state type for MTL SAMedia")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016201012.1022812-1-arnd@kernel.org
(cherry picked from commit 0520b30b21)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
gen8_ggtt_invalidate() is only needed for limited set of platforms
where GGTT is mapped as WC. This was added as way to fix WC based GGTT in
commit 0f9b91c754 ("drm/i915: flush system agent TLBs on SNB") and
there are no reference in HW docs that forces us to use this on non-WC
backed GGTT.
This can also cause unwanted side-effects on XE_HP platforms where
GFX_FLSH_CNTL_GEN6 is not valid anymore.
v2: Add a func to detect wc ggtt detection (Ville)
v3: Improve commit log and add reference commit (Daniel)
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v6.2+
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018093815.1349-1-nirmoy.das@intel.com
In accordance to Linux coding style(Documentation/process/4.Coding.rst),
remove unneeded braces from if-else block as all arms of this block
contain single statements.
Suggested-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Soumya Negi <soumya.negi97@gmail.com>
Acked-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026044309.17213-1-soumya.negi97@gmail.com
The newly added memset() causes a warning for some reason I could not
figure out:
In file included from arch/x86/include/asm/string.h:3,
from drivers/gpu/drm/i915/gt/intel_rc6.c:6:
In function 'rc6_res_reg_init',
inlined from 'intel_rc6_init' at drivers/gpu/drm/i915/gt/intel_rc6.c:610:2:
arch/x86/include/asm/string_32.h:195:29: error: '__builtin_memset' writing 16 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
195 | #define memset(s, c, count) __builtin_memset(s, c, count)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_rc6.c:584:9: note: in expansion of macro 'memset'
584 | memset(rc6->res_reg, INVALID_MMIO_REG.reg, sizeof(rc6->res_reg));
| ^~~~~~
In function 'intel_rc6_init':
Change it to an normal initializer and an added memcpy() that does not have
this problem.
Fixes: 4bb9ca7ee0 ("drm/i915/mtl: C6 residency and C state type for MTL SAMedia")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016201012.1022812-1-arnd@kernel.org
The steering control and semaphore registers are inside an "always on"
power domain with respect to RC6. However there are some issues if
higher-level platform sleep states are entering/exiting at the same time
these registers are accessed. Grabbing GT forcewake and holding it over
the entire lock/steer/unlock cycle ensures that those sleep states have
been fully exited before we access these registers.
This is expected to become a formally documented/numbered workaround
soon.
Note that this patch alone isn't expected to have an immediately
noticeable impact on MCR (mis)behavior; an upcoming pcode firmware
update will also be necessary to provide the other half of this
workaround.
v2:
- Move the forcewake inside the Xe_LPG-specific IP version check. This
should only be necessary on platforms that have a steering semaphore.
Fixes: 3100240bf8 ("drm/i915/mtl: Add hardware-level lock for steering")
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231019170241.2102037-2-matthew.d.roper@intel.com
(cherry picked from commit 8fa1c7cd1f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The steering control and semaphore registers are inside an "always on"
power domain with respect to RC6. However there are some issues if
higher-level platform sleep states are entering/exiting at the same time
these registers are accessed. Grabbing GT forcewake and holding it over
the entire lock/steer/unlock cycle ensures that those sleep states have
been fully exited before we access these registers.
This is expected to become a formally documented/numbered workaround
soon.
Note that this patch alone isn't expected to have an immediately
noticeable impact on MCR (mis)behavior; an upcoming pcode firmware
update will also be necessary to provide the other half of this
workaround.
v2:
- Move the forcewake inside the Xe_LPG-specific IP version check. This
should only be necessary on platforms that have a steering semaphore.
Fixes: 3100240bf8 ("drm/i915/mtl: Add hardware-level lock for steering")
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231019170241.2102037-2-matthew.d.roper@intel.com
This bit does not cause an explicit L3 flush. We already use
PIPE_CONTROL_DC_FLUSH_ENABLE for that purpose.
v2: Use FLUSH_L3 only pre-MTL since spec will likely remain
the same going forward.
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231017195309.2476088-1-vinay.belgaumkar@intel.com
If measure_breadcrumb_dw() returns an error and bce isn't created,
this commit ensures that intel_engine_destroy_pinned_context()
is not called with a NULL bce.
v2: Fix the subject s/UAF/null-ptr-deref(Jani)
Fixes: b352749936 ("drm/i915: Create a kernel context for GGTT updates")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011122547.7085-1-nirmoy.das@intel.com
For the gt_tlb live selftest, when operating on the GSC engine,
increase the timeout from 10 ms to 200 ms because the GSC
engine is a bit slower than the rest.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-7-jonathan.cavitt@intel.com
It is not an error for GuC TLB invalidations to fail when the GT is
wedged or disabled, so do not process a wait failure as one in
guc_send_invalidate_tlb.
Signed-off-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
CC: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-6-jonathan.cavitt@intel.com
In case of GT is suspended, don't allow submission of new TLB invalidation
request and cancel all pending requests. The TLB entries will be
invalidated either during GuC reload or on system resume.
Signed-off-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
CC: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-5-jonathan.cavitt@intel.com
The GuC firmware had defined the interface for Translation Look-Aside
Buffer (TLB) invalidation. We should use this interface when
invalidating the engine and GuC TLBs.
Add additional functionality to intel_gt_invalidate_tlb, invalidating
the GuC TLBs and falling back to GT invalidation when the GuC is
disabled.
The invalidation is done by sending a request directly to the GuC
tlb_lookup that invalidates the table. The invalidation is submitted as
a wait request and is performed in the CT event handler. This means we
cannot perform this TLB invalidation path if the CT is not enabled.
If the request isn't fulfilled in two seconds, this would constitute
an error in the invalidation as that would constitute either a lost
request or a severe GuC overload.
With this new invalidation routine, we can perform GuC-based GGTT
invalidations. GuC-based GGTT invalidation is incompatible with
MMIO invalidation so we should not perform MMIO invalidation when
GuC-based GGTT invalidation is expected.
The additional complexity incurred in this patch will be necessary for
range-based tlb invalidations, which will be platformed in the future.
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Bruce Chang <yu.bruce.chang@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
CC: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-4-jonathan.cavitt@intel.com
As of now, there is no mechanism for tracking a given request's
progress through the queue. Instead, add a helper that returns
an estimated maximum time the queue should take to drain if
completely full.
Suggested-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231017180806.3054290-3-jonathan.cavitt@intel.com
The GuC handles the WA, the KMD just needs to set the flag to enable
it on the appropriate platforms.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006013553.1339418-1-John.C.Harrison@Intel.com
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct ct_incoming_msg.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-hardening@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006201744.work.135-kees@kernel.org
The latest GuC has new features and new workarounds that we wish to
enable. So let the universe know that it is useful to update their
firmware.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006145801.161868-1-John.C.Harrison@Intel.com
Add a kthread_stop_put() helper that stops a thread and puts its task
struct. Use it to replace the various instances of kthread_stop()
followed by put_task_struct().
Remove the kthread_stop_put() macro in usbip that is similar but doesn't
return the result of kthread_stop().
[agruenba@redhat.com: fix kerneldoc comment]
Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com
[akpm@linux-foundation.org: document kthread_stop_put()'s argument]
Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If an active context has been banned (e.g. Ctrl+C killed) then it is
likely to be reset as part of evicting it from the hardware. That
results in a 'ignoring context reset notification: banned = 1'
message at info level. This confuses/concerns people and makes them
think something has gone wrong when it hasn't.
There is already a debug level message with essentially the same
information. So drop the 'ignore' info level one and just add the
'ignore' flag to the debug level one instead (which will therefore not
appear by default but will still show up in CI runs).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921182033.135448-1-John.C.Harrison@Intel.com
Chaining user engines happens in multiple passes during driver
initialization, mutating its type along the way. It starts off with a
simple lock-less linked list (struct llist_node/head) populated by
intel_engine_add_user() which later gets sorted and converted to an
intermediate regular list (struct list_head) just to be converted once
more to its final rb-tree structure (struct rb_node/root) in
intel_engines_driver_register().
All of these types overlay the uabi_node/uabi_engines members which is
unfortunate but safe if one takes care about using the rb-tree based
structure only after the conversion has completed. However, mistakes
happen and commit 1ec23ed712 ("drm/i915: Use uabi engines for the
default engine map") violated that assumption, as the multiple type
evolution was all to easy hidden behind casts papering over it.
Make the type evolution of uabi_node/uabi_engines more visible by
putting all members into an anonymous union and use the correctly typed
member in its various users. This allows us to drop quite some ugly
casts and, hopefully, make the evolution of the members better
recognisable to avoid future mistakes.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928182019.10256-3-minipli@grsecurity.net
MTL can hang because of a HW bug while parallel reading/writing
from/to LMEM/GTTMMADR BAR so try to reduce GGTT update
related pci transactions with blitter command as recommended
for Wa_13010847436 and Wa_14019519902.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926083742.14740-8-nirmoy.das@intel.com
Toggle binder context ready status when needed.
To issue gpu commands, the driver must be primed to receive
requests. Maintain binder-based GGTT update disablement until driver
probing completes. Moreover, implement a temporary disablement
of blitter prior to entering suspend, followed by re-enablement
post-resume. This is acceptable as those transition periods are
mostly single threaded.
v2: move changes to lower levels from i915_driver.c(Jani).
use new function for setting context ready status.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926083742.14740-7-nirmoy.das@intel.com
Implement GGTT update method with blitter command, MI_UPDATE_GTT
and install those handlers if a platform requires that.
v2: Make sure we hold the GT wakeref and Blitter engine wakeref before
we call mutex_lock/intel_context_enter below. When GT/engine are not
awake, the intel_context_enter calls into some runtime pm function which
can end up with kmalloc/fs_reclaim. But trigger fs_reclaim holding a
mutex lock is not allowed because shrinker can also try to hold the same
mutex lock. It is a circular lock. So hold the GT/blitter engine wakeref
before calling mutex_lock, to fix the circular lock.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Acked-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926083742.14740-6-nirmoy.das@intel.com
Add i915_ggtt_require_binder() to indicate that i915
needs to create binder context which will be used
by subsequent patch to enable i915_address_space vfuncs
that will use GPU commands to update GGTT.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926083742.14740-5-nirmoy.das@intel.com
Create a separate kernel context if a platform requires
GGTT updates using MI_UPDATE_GTT blitter command.
Subsequent patch will introduce methods to update
GGTT using this bind context and MI_UPDATE_GTT blitter
command.
v2: fix context leak on err(Oak)
v3: improve err handling and improve function names(Andi)
add docs for few functions.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926083742.14740-3-nirmoy.das@intel.com
On MTL GEN12_RING_FAULT_REG is not replicated so don't
do mcr based operation for this register.
v2: use MEDIA_VER() instead of GRAPHICS_VER()(Matt).
v3: s/"MEDIA_VER(i915) == 13"/"MEDIA_VER(i915) >= 13"(Matt)
improve comment.
v4: improve the comment further(Andi)
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928130015.6758-4-nirmoy.das@intel.com
During resume, the steer semaphore on GT1 was observed to be held. The
hardware team has confirmed the safety of clearing steer semaphores
for all GTs during driver load/resume, as no lock acquisitions can occur
in this process by other agents.
v2: reset on resume not in intel_gt_init().
v3: do the reset on intel_gt_resume_early()
v4: do general sanitization for all GTs(Matt)
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928130015.6758-3-nirmoy.das@intel.com
Implement intel_gt_mcr_lock_sanitize() to provide a mechanism
for cleaning the steer semaphore when absolutely necessary.
v2: remove unnecessary lock(Andi, Matt)
improve the kernel doc(Matt)
s/intel_gt_mcr_lock_clear/intel_gt_mcr_lock_sanitize
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928130015.6758-1-nirmoy.das@intel.com
Commit ade8a0f598 ("drm/i915: Make all GPU resets atomic") added a
preempt disable section over the hardware reset callback to prepare the
driver for being able to reset from atomic contexts.
In retrospect I can see that the work item at a time was about removing
the struct mutex from the reset path. Code base also briefly entertained
the idea of doing the reset under stop_machine in order to serialize
userspace mmap and temporary glitch in the fence registers (see
eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex"),
but that never materialized and was soon removed in 2caffbf117
("drm/i915: Revoke mmaps and prevent access to fence registers across
reset") and replaced with a SRCU based solution.
As such, as far as I can see, today we still have a requirement that
resets must not sleep (invoked from submission tasklets), but no need to
support invoking them from a truly atomic context.
Given that the preemption section is problematic on RT kernels, since the
uncore lock becomes a sleeping lock and so is invalid in such section,
lets try and remove it. Potential downside is that our short waits on GPU
to complete the reset may get extended if CPU scheduling interferes, but
in practice that probably isn't a deal breaker.
In terms of mechanics, since the preemption disabled block is being
removed we just need to replace a few of the wait_for_atomic macros into
busy looping versions which will work (and not complain) when called from
non-atomic sections.
v2:
* Fix timeouts which are now in us. (Andi)
* Update one comment as a drive by. (Andi)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926100855.61722-1-tvrtko.ursulin@linux.intel.com
Ideally the busyness worker should take a gt pm wakeref because the
worker only needs to be active while gt is awake. However, the gt_park
path cancels the worker synchronously and this complicates the flow if
the worker is also running at the same time. The cancel waits for the
worker and when the worker releases the wakeref, that would call gt_park
and would lead to a deadlock.
The resolution is to take the global pm wakeref if runtime pm is already
active. If not, we don't need to update the busyness stats as the stats
would already be updated when the gt was parked.
Note:
- We do not requeue the worker if we cannot take a reference to runtime
pm since intel_guc_busyness_unpark would requeue the worker in the
resume path.
- If the gt was parked longer than time taken for GT timestamp to roll
over, we ignore those rollovers since we don't care about tracking the
exact GT time. We only care about roll overs when the gt is active and
running workloads.
- There is a window of time between gt_park and runtime suspend, where
the worker may run. This is acceptable since the worker will not find
any new data to update busyness.
v2: (Daniele)
- Edit commit message and code comment
- Use runtime pm in the worker
- Put runtime pm after enabling the worker
- Use Link tag and add Fixes tag
v3: (Daniele)
- Reword commit and comments and add details
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7077
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925192117.2497058-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit e2f99b79d4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There is an assertion in ggtt_reserve_guc_top that the global GTT
is of size at least GUC_GGTT_TOP, which is not the case on a 32-bit
platform; see commit 562d55d991
("drm/i915/bdw: Only use 2g GGTT for 32b platforms"). If GEM_BUG_ON
is enabled, this triggers a BUG(); if GEM_BUG_ON is disabled, the
subsequent reservation fails and the driver fails to initialise
the device:
i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Failed to reserve top of GGTT for GuC
i915 0000:00:02.0: Device initialization failed (-28)
i915 0000:00:02.0: Please file a bug on drm/i915; see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.
i915: probe of 0000:00:02.0 failed with error -28
Make the reservation at the top of the available space, whatever
that is, instead of assuming that the top will be GUC_GGTT_TOP.
Fixes: 911800765e ("drm/i915/uc: Reserve upper range of GGTT")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9080
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230902171039.2229126186d697dbcf62d6d8@otheo.eu
(cherry picked from commit 0f3fa942d9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ideally the busyness worker should take a gt pm wakeref because the
worker only needs to be active while gt is awake. However, the gt_park
path cancels the worker synchronously and this complicates the flow if
the worker is also running at the same time. The cancel waits for the
worker and when the worker releases the wakeref, that would call gt_park
and would lead to a deadlock.
The resolution is to take the global pm wakeref if runtime pm is already
active. If not, we don't need to update the busyness stats as the stats
would already be updated when the gt was parked.
Note:
- We do not requeue the worker if we cannot take a reference to runtime
pm since intel_guc_busyness_unpark would requeue the worker in the
resume path.
- If the gt was parked longer than time taken for GT timestamp to roll
over, we ignore those rollovers since we don't care about tracking the
exact GT time. We only care about roll overs when the gt is active and
running workloads.
- There is a window of time between gt_park and runtime suspend, where
the worker may run. This is acceptable since the worker will not find
any new data to update busyness.
v2: (Daniele)
- Edit commit message and code comment
- Use runtime pm in the worker
- Put runtime pm after enabling the worker
- Use Link tag and add Fixes tag
v3: (Daniele)
- Reword commit and comments and add details
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7077
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925192117.2497058-1-umesh.nerlige.ramappa@intel.com
It's actively harmful to add static inlines in headers that require you
to pull in more headers. Remove the include added in commit f1530f912e
("drm/i915/gt: Apply workaround 22016122933 correctly"). We see that
there's already an implicit dependency on the i915_drv.h that we need to
address too.
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921162456.3889375-1-jani.nikula@intel.com
There is an assertion in ggtt_reserve_guc_top that the global GTT
is of size at least GUC_GGTT_TOP, which is not the case on a 32-bit
platform; see commit 562d55d991
("drm/i915/bdw: Only use 2g GGTT for 32b platforms"). If GEM_BUG_ON
is enabled, this triggers a BUG(); if GEM_BUG_ON is disabled, the
subsequent reservation fails and the driver fails to initialise
the device:
i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Failed to reserve top of GGTT for GuC
i915 0000:00:02.0: Device initialization failed (-28)
i915 0000:00:02.0: Please file a bug on drm/i915; see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.
i915: probe of 0000:00:02.0 failed with error -28
Make the reservation at the top of the available space, whatever
that is, instead of assuming that the top will be GUC_GGTT_TOP.
Fixes: 911800765e ("drm/i915/uc: Reserve upper range of GGTT")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9080
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230902171039.2229126186d697dbcf62d6d8@otheo.eu
It has been observed sometimes RC6 status register's unused bits are
being set by h/w, without affecting RC6 functionality therefore updating
the mask with used bits accordingly.
As mtl_drpc is debugfs function, removing MISSING_CASE from default case as
it doesn't make sense to panic (panic_on_warn=1) the CI system if register
is reporting unsupported state.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920090620.3255091-1-badal.nilawar@intel.com
engine->stats is a union of execlist and guc stat objects. When execlist
specific fields are initialized, the initial state of guc stats is
affected. This results in bad busyness values when using GuC mode. Move
the execlist initialization from common code to execlist specific code.
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912212247.1828681-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 4485bd519f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move the check for "if (IS_ERR(obj))" in front of the call to
i915_gem_object_set_cache_coherency() which dereferences "obj".
Otherwise it will lead to a crash.
Fixes: 43aa755eae ("drm/i915/mtl: Update cache coherency setting for context structure")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/455b2279-2e08-4d00-9784-be56d8ee42e3@moroto.mountain
(cherry picked from commit c92ec50822)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On Meteorlake onwards, HW specs require that all user contexts that
run on render or compute engines and require PXP must enforce
run-alone bit in lrc. Add this enforcement for protected contexts.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230917211933.1407559-4-alan.previn.teres.alexis@intel.com
Update the max GSC-fw response time to match updated internal
fw specs. Because this response time is an SLA on the firmware,
not inclusive of i915->GuC->HW handoff latency, when submitting
requests to the GSC fw via intel_gsc_uc_heci_cmd_submit helpers,
start the count after the request hits the GSC command streamer.
Also, move GSC_REPLY_LATENCY_MS definition from pxp header to
intel_gsc_uc_heci_cmd_submit.h since its for any GSC HECI packet.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230917211933.1407559-2-alan.previn.teres.alexis@intel.com
engine->stats is a union of execlist and guc stat objects. When execlist
specific fields are initialized, the initial state of guc stats is
affected. This results in bad busyness values when using GuC mode. Move
the execlist initialization from common code to execlist specific code.
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912212247.1828681-1-umesh.nerlige.ramappa@intel.com
Invalidate instruction and State cache bit using INDIRECT_CTX on
every gpu context switch for gen12.
The goal of this workaround is to actually perform an explicit
invalidation of that cache (by re-writing the register) during every GPU
context switch, which is accomplished via a "workaround batchbuffer"
that's attached to the context via INDIRECT_CTX. (Matt Roper)
Please refer [1] for more reviews and comment on the same patch
[1] https://patchwork.freedesktop.org/series/123377/
v2:
- Remove extra parentheses from the condition (Lucas)
- Align spacing and new line (Lucas)
v3:
- Fix commit message.
v4:
- Only Gen12 changes are kept and Remove DG2+ condition (Matt Roper)
- Fix the commit message for r-b (Matt Roper)
- Rename the register bit in define
v5:
- Move out this workaround from golden context init (Matt Roper)
- Use INDIRECT_CTX to set bit on each GPU context switch (Matt Roper)
v6:
- Change IP Version base condition for Gen12 (Matt Roper)
- Made imperative form of commit version messages (Suraj)
- s/Added/Add in patch header (Suraj)
v7:
- In version descriptions s/Ropper/Roper (Matt Atwood)
BSpec: 11354
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914202000.1069884-1-dnyaneshwar.bhadane@intel.com
Move the check for "if (IS_ERR(obj))" in front of the call to
i915_gem_object_set_cache_coherency() which dereferences "obj".
Otherwise it will lead to a crash.
Fixes: 43aa755eae ("drm/i915/mtl: Update cache coherency setting for context structure")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/455b2279-2e08-4d00-9784-be56d8ee42e3@moroto.mountain
The thread_global_copy subtest of the live migrate selftest creates a
large number of threads and waits 10ms for them all to start. This is
not enough time to wait for the threaded tasks to start, as some may
need to wait for additional ring space to be granted. Threads that do
so are at risk of getting stopped (signaled) in the middle of waiting
for additional space, which can result in ERESTARTSYS getting reported
erroneously by i915_request_wait.
Instead of waiting a flat 10ms for the threads to start, wait 10ms per
thread. This grants enough of a buffer for each thread to wait for
additional ring space when needed.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828192852.2894671-2-jonathan.cavitt@intel.com
References to i915_requests may be trapped by userspace inside a
sync_file or dmabuf (dma-resv) and held indefinitely across different
proceses. To counter-act the memory leaks, we try to not to keep
references from the request past their completion.
On the other side on fence release we need to know if rq->engine
is valid and points to hw engine (true for non-virtual requests).
To make it possible extra bit has been added to rq->execution_mask,
for marking virtual engines.
Fixes: bcb9aa45d5 ("Revert "drm/i915: Hold reference to intel_context over life of i915_request"")
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821153035.3903006-1-andrzej.hajda@intel.com
(cherry picked from commit 280410677a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
References to i915_requests may be trapped by userspace inside a
sync_file or dmabuf (dma-resv) and held indefinitely across different
proceses. To counter-act the memory leaks, we try to not to keep
references from the request past their completion.
On the other side on fence release we need to know if rq->engine
is valid and points to hw engine (true for non-virtual requests).
To make it possible extra bit has been added to rq->execution_mask,
for marking virtual engines.
Fixes: bcb9aa45d5 ("Revert "drm/i915: Hold reference to intel_context over life of i915_request"")
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821153035.3903006-1-andrzej.hajda@intel.com
Now this workaround is permanent workaround on MTL and DG2,
earlier we used to apply on MTL A0 step only.
VLK-45480
Fixes: d922b80b10 ("drm/i915/gt: Add workaround 14016712196")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828063450.2642748-1-tejas.upadhyay@intel.com
Add FW definition and the matching override modparam.
The GSC FW has both a release version, based on platform and a rolling
counter, and a compatibility version, which is the one tracking
interface changes. Since what we care about is the interface, we use
the compatibility version in the binary names.
Same as with the GuC, a major version bump indicate a
backward-incompatible change, while a minor version bump indicates a
backward-compatible one, so we use only the former in the file name.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230825162754.1949838-1-daniele.ceraolospurio@intel.com
If GuC hits an internal error (and survives long enough to report it
to the KMD), it is basically toast and will stop until a GT reset and
subsequent GuC reload is performed. Previously, the KMD just printed
an error message and then waited for the heartbeat to eventually kick
in and trigger a reset (assuming the heartbeat had not been disabled).
Instead, force the reset immediately to guarantee that it happens and
to eliminate the very long heartbeat delay. The captured error state
is also more likely to be useful if captured at the time of the error
rather than many seconds later.
Note that it is not possible to trigger a reset from with the G2H
handler itself. The reset prepare process involves flushing
outstanding G2H contents. So a deadlock could result. Instead, the G2H
handler queues a worker thread to do the reset asynchronously.
v2: Flush the worker on suspend and shutdown. Add rate limiting to
prevent spam from a totally dead system (review feedback from Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816003957.3572654-1-John.C.Harrison@Intel.com
Many of the IS_METEORLAKE conditions throughout the driver are supposed
to be checks for Xe_LPG and/or Xe_LPM+ IP, not for the MTL platform
specifically. Update those checks to ensure that the code will still
operate properly if/when these IP versions show up on future platforms.
v2:
- Update two more conditions (one for pg_enable, one for MTL HuC
compatibility).
v3:
- Don't change GuC/HuC compatibility check, which sounds like it truly
is specific to the MTL platform. (Gustavo)
- Drop a non-lineage workaround number for the OA timestamp frequency
workaround. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-20-matthew.d.roper@intel.com
Stepping-specific media behavior shouldn't be tied to MTL as a platform,
but rather specifically to the Xe_LPM+ IP. Future non-MTL platforms may
re-use this IP and will need to follow the exact same logic and apply
the same workarounds. IS_MTL_MEDIA_STEP() is dropped in favor of
IS_MEDIA_GT_IP_STEP, which checks the media IP version associated with a
specific IP and also ensures that we're operating on the media GT, not
the primary GT.
v2:
- Switch to the IS_GT_IP_STEP macro.
v3:
- Switch back to long-form IS_MEDIA_GT_IP_STEP. (Jani)
v4:
- Build IS_MEDIA_GT_IP_STEP on top of IS_MEDIA_GT_IP_RANGE and
IS_MEDIA_STEP building blocks and name the parameters from/until
rather than begin/fixed.. (Jani)
v5:
- Tweak macro comment wording. (Gustavo)
- Add a check to catch NULL gt in IS_MEDIA_GT_IP_RANGE; this allows it
to be used safely on i915->media_gt, which may be NULL on some
platforms. (Gustavo)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-16-matthew.d.roper@intel.com
Several workarounds are guarded by IS_MTL_GRAPHICS_STEP. However none
of these workarounds are actually tied to MTL as a platform; they only
relate to the Xe_LPG graphics IP, regardless of what platform it appears
in. At the moment MTL is the only platform that uses Xe_LPG with IP
versions 12.70 and 12.71, but we can't count on this being true in the
future. Switch these to use a new IS_GFX_GT_IP_STEP() macro instead
that is purely based on IP version. IS_GFX_GT_IP_STEP() is also
GT-based rather than device-based, which will help prevent mistakes
where we accidentally try to apply Xe_LPG graphics workarounds to the
Xe_LPM+ media GT and vice-versa.
v2:
- Switch to a more generic and shorter IS_GT_IP_STEP macro that can be
used for both graphics and media IP (and any other kind of GTs that
show up in the future).
v3:
- Switch back to long-form IS_GFX_GT_IP_STEP macro. (Jani)
- Move macro to intel_gt.h. (Andi)
v4:
- Build IS_GFX_GT_IP_STEP on top of IS_GFX_GT_IP_RANGE and
IS_GRAPHICS_STEP building blocks and name the parameters from/until
rather than begin/fixed. (Jani)
- Fix usage examples in comment.
v5:
- Tweak comment on macro. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-15-matthew.d.roper@intel.com
Although some of our Xe_LPG workarounds were already being applied based
on IP version correctly, others were matching on MTL as a base platform,
which is incorrect. Although MTL is the only platform right now that
uses Xe_LPG IP, this may not always be the case. If a future platform
re-uses this graphics IP, the same workarounds should be applied, even
if it isn't a "MTL" platform.
We were also incorrectly applying Xe_LPG workarounds/tuning to the
Xe_LPM+ media IP in one or two places; we should make sure that we don't
try to apply graphics workarounds to the media GT and vice versa where
they don't belong. A new helper macro IS_GT_IP_RANGE() is added to help
ensure this is handled properly -- it checks that the GT matches the IP
type being tested as well as the IP version falling in the proper range.
Note that many of the stepping-based workarounds are still incorrectly
checking for a MTL base platform; that will be remedied in a later
patch.
v2:
- Rework macro into a slightly more generic IS_GT_IP_RANGE() that can
be used for either GFX or MEDIA checks.
v3:
- Switch back to separate macros for gfx and media. (Jani)
- Move macro to intel_gt.h. (Andi)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-14-matthew.d.roper@intel.com
The workaround bounds for Wa_22011802037 are somewhat complex and are
replicated in several places throughout the code. Pull the condition
out to a helper function to prevent mistakes if this condition needs to
change again in the future.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-12-matthew.d.roper@intel.com
Wa_16011777198 only applies to pre-production steppings of DG2, which
we're no longer supporting. Remove the workaround and override_gucrc
handling, which is no longer needed. Since this was the final use of
IS_DG2_GRAPHICS_STEP, that macro can also be removed now.
v2:
- Include the promised removal of override_gucrc handling.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816214824.548575-2-matthew.d.roper@intel.com
Removal of the DG2 pre-production workarounds has left duplicate
condition blocks in a couple places, as well as some inconsistent
platform ordering. Reshuffle and consolidate some of the workarounds to
reduce the number of condition blocks and to more consistently follow
the "newest platform first" convention. Code movement only; no
functional change.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816214201.534095-11-matthew.d.roper@intel.com
DG2 first production steppings were C0 (for DG2-G10), B1 (for DG2-G11),
and A1 (for DG2-G12). Several workarounds that apply onto to
pre-production hardware can be dropped. Furthermore, several
workarounds that apply to all production steppings can have their
conditions simplified to no longer check the GT stepping.
v2:
- Keep Wa_16011777198 in place for now; it will be removed separately
in a follow-up patch to keep review easier.
Bspec: 44477
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816214201.534095-10-matthew.d.roper@intel.com
It was noticed that if the very first 'stealing' request failed to
create for some reason then the 'steal all ids' loop would immediately
exit with 'last' still being NULL. The test would attempt to continue
but using a null pointer. Fix that by aborting the test if it fails to
create any requests at all.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802184940.911753-1-John.C.Harrison@Intel.com
WA_22016122933 was recently applied to all MeteorLake engines, which is
simultaneously too broad (should only apply to Media engines) and too
specific (should apply to all platforms that use the same media engine
as MeteorLake). Correct this in cases where coherency settings are
modified.
There were also two additional places where the workaround was applied
unconditionally. The change was confirmed as necessary for all
platforms, so the workaround label was removed.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801153242.2445478-4-jonathan.cavitt@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230807121957.598420-4-andi.shyti@linux.intel.com
Refactor i915_coherent_map_type to be GT-centric rather than
device-centric. Each GT may require different coherency
handling due to hardware workarounds.
Since the function now takes a GT instead of the i915, the function is
renamed and moved to the gt folder.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801153242.2445478-3-jonathan.cavitt@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230807121957.598420-3-andi.shyti@linux.intel.com
The object pin created for shmem_create_from_object is just a
single use mapping with the sole purpose of reading the contents
of the whole object in bulk. And the whole source object is also
even a throw-away. Ergo, the additional logic required by
i915_coherent_map_type can be safely dropped and simplified.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801153242.2445478-2-jonathan.cavitt@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230807121957.598420-2-andi.shyti@linux.intel.com
Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As a preparation for Xe move HW fence details away from intel_fbc code.
Add new functions to check support for legacy fencing and fence id and use
these in fbc code. Xe doesn't support legacy fencing.
v2: Fix intel_gt_support_legacy_fencing macro
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230614051731.745821-4-jouni.hogander@intel.com
Driver Changes:
- Avoid infinite GPU waits by avoidin premature release of request's
reusable memory (Chris, Janusz)
- Expose RPS thresholds in sysfs (Tvrtko)
- Apply GuC SLPC min frequency softlimit correctly (Vinay)
- Restore SLPC efficient freq earlier (Vinay)
- Consider OA buffer boundary when zeroing out reports (Umesh)
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL (Matt R)
- Fix context workarounds with non-masked regs on MTL/DG2 (Lucas)
- Enable the CCS_FLUSH bit in the pipe control and in the CS for MTL+ (Andi)
- Update MTL workarounds 14018778641, 22016122933 (Tejas, Zhanjun)
- Ensure memory quiesced before AUX CCS invalidation (Jonathan)
- Add a gsc_info debugfs (Daniele)
- Invalidate the TLBs on each GT on multi-GT device (Chris)
- Fix a VMA UAF for multi-gt platform (Nirmoy)
- Do not use stolen on MTL due to HW bug (Nirmoy)
- Check HuC and GuC version compatibility on MTL (Daniele)
- Dump perf_limit_reasons for slow GuC init debug (Vinay)
- Replace kmap() with kmap_local_page() (Sumitra, Ira)
- Add sentinel to xehp_oa_b_counters for KASAN (Andrzej)
- Add the gen12_needs_ccs_aux_inv helper (Andi)
- Fixes and updates for GSC memory allocation (Daniele)
- Fix one wrong caching mode enum usage (Tvrtko)
- Fixes for GSC wakeref (Alan)
- Static checker fixes (Harshit, Arnd, Dan, Cristophe, David, Andi)
- Rename flags with bit_group_X according to the datasheet (Andi)
- Use direct alias for i915 in requests (Andrzej)
- Replace i915->gt0 with to_gt(i915) (Andi)
- Use the i915_vma_flush_writes helper (Tvrtko)
- Selftest improvements (Alan)
- Remove dead code (Tvrtko)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.c
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMy6kDd9npweR4uy@jlahtine-mobl.ger.corp.intel.com
- ICL+ DSI modeset sequence fixes (Ville)
- Improvements on HDCP (Suraj)
- Fixes and clean up on MTL Display (Mika Kahola, Lee, RK, Nirmoy, Chaitanya)
- Restore HSW/BDW PSR1 (Ville)
- Other PSR Fixes (Jouni)
- Fixes around DC states and other Display Power (Imre)
- Init DDI ports in VBT order (Ville)
- General documentation fixes (Jani)
- General refactor for better organization (Jani)
- Bigjoiner fix (Stanislav)
- VDSC Fixes and improvements (Stanialav, Suraj)
- Hotplug fixes and improvements (Simon, Suraj)
- Start using plane scale factor for relative data rate (Stanislav)
- Use shmem for dpt objects (RK)
- Simplify expression &to_i915(dev)->drm (Uwe)
- Do not access i915_gem_object members from frontbuffer tracking (Jouni)
- Fix uncore race around i915->params.mmio_debug (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmTL9/EACgkQ+mJfZA7r
E8oqdQgAtD6j4Lih3rVRSLW5Y64MXnGdIHdNtVzLIOJWKLex3e7lFRvZp8IE6MY/
UifZBQ45UEJAo3kcX36TReKG/URzc6jpu3YA2ihwt6uTJW2bZWmtNgfGgnILssOi
hnOTRaxUwVM6wvi62AUKi6AxtDdHrRzcP+RyqGFvjBP76CuOpYSuJq8AK/PBXKFH
z760SqAWILOXqPG+oUYV9vdAmzY71gWDyi3MJqTYYg4YORK+itKMTbeWtFnEJF59
YqAD+/neZ7Y9FafSajUu9l9E9A9srqVAc2zFlcof2rA2MgJyHRBAl2fP4GY6+TDI
ahjmQY/BNP711SnEGArPkRZdcUSMXA==
=44FM
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-08-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Removing unused declarations (Arnd, Gustavo)
- ICL+ DSI modeset sequence fixes (Ville)
- Improvements on HDCP (Suraj)
- Fixes and clean up on MTL Display (Mika Kahola, Lee, RK, Nirmoy, Chaitanya)
- Restore HSW/BDW PSR1 (Ville)
- Other PSR Fixes (Jouni)
- Fixes around DC states and other Display Power (Imre)
- Init DDI ports in VBT order (Ville)
- General documentation fixes (Jani)
- General refactor for better organization (Jani)
- Bigjoiner fix (Stanislav)
- VDSC Fixes and improvements (Stanialav, Suraj)
- Hotplug fixes and improvements (Simon, Suraj)
- Start using plane scale factor for relative data rate (Stanislav)
- Use shmem for dpt objects (RK)
- Simplify expression &to_i915(dev)->drm (Uwe)
- Do not access i915_gem_object members from frontbuffer tracking (Jouni)
- Fix uncore race around i915->params.mmio_debug (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMv4RCzGyCmG/BDe@intel.com
This should be done before the soft min/max frequencies are restored.
When we disable the "Ignore efficient frequency" flag, GuC does not
actually bring the requested freq down to RPn.
Specifically, this scenario-
- ignore efficient freq set to true
- reduce min to RPn (from efficient)
- suspend
- resume (includes GuC load, restore soft min/max, restore efficient freq)
- validate min freq has been resored to RPn
This will fail if we didn't first restore(disable, in this case) efficient
freq flag before setting the soft min frequency.
v2: Bring the min freq down to RPn when we disable efficient freq (Rodrigo)
Also made the change to set the min softlimit to RPn at init. Otherwise, we
were storing RPe there.
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8736
Fixes: 55f9720dbf ("drm/i915/guc/slpc: Provide sysfs for efficient freq")
Fixes: 95ccf312a1 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726010044.3280402-1-vinay.belgaumkar@intel.com
With multi-GT devices, the object may have been bound on each GT.
Invalidate the TLBs across all GT before releasing the pages
back to the system.
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-4-andi.shyti@linux.intel.com
Create a new intel_gt_defines.h inside the gt/ directory as a
placeholder for all the generic GT based defines.
As of now place only I915_MAX_GT.
Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-3-andi.shyti@linux.intel.com
Prepare for supporting more TLB invalidation scenarios by moving
the current MMIO invalidation to its own file.
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-2-andi.shyti@linux.intel.com
On MTL, if the GSC Proxy init flows haven't completed, submissions to the
GSC engine will fail. Those init flows are dependent on the mei's
gsc_proxy component that is loaded in parallel with i915 and a
worker that could potentially start after i915 driver init is done.
That said, all subsytems that access the GSC engine today does check
for such init flow completion before using the GSC engine. However,
selftests currently don't wait on anything before starting.
To fix this, add a waiter function at the start of __run_selftests
that waits for gsc-proxy init flows to complete. Selftests shouldn't
care if the proxy-init failed as that should be flagged elsewhere.
Difference from prior versions:
v7: - Change the fw status to INTEL_UC_FIRMWARE_LOAD_FAIL if the
proxy-init fails so that intel_gsc_uc_fw_proxy_get_status
catches it. (Daniele)
v6: - Add a helper that returns something more than a boolean
so we selftest can stop waiting if proxy-init hadn't
completed but failed (Daniele).
v5: - Move the call to __wait_gsc_proxy_completed from common
__run_selftests dispatcher to the group-level selftest
function (Trvtko).
- change the pr_info to pr_warn if we hit the timeout.
v4: - Remove generalized waiters function table framework (Tvrtko).
- Remove mention of CI-framework-timeout from comments (Tvrtko).
v3: - Rebase to latest drm-tip.
v2: - Based on internal testing, increase the timeout for gsc-proxy
specific case to 8 seconds.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720230126.375566-1-alan.previn.teres.alexis@intel.com
Perform some refactoring with the purpose of keeping in one
single place all the operations around the aux table
invalidation.
With this refactoring add more engines where the invalidation
should be performed.
Fixes: 972282c4cf ("drm/i915/gen12: Add aux table invalidate for all engines")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725001950.1014671-8-andi.shyti@linux.intel.com
For platforms that use Aux CCS, wait for aux invalidation to
complete by checking the aux invalidation register bit is
cleared.
Fixes: 972282c4cf ("drm/i915/gen12: Add aux table invalidate for all engines")
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725001950.1014671-7-andi.shyti@linux.intel.com
Enable the CCS_FLUSH bit 13 in the control pipe for render and
compute engines in platforms starting from Meteor Lake (BSPEC
43904 and 47112).
For the copy engine add MI_FLUSH_DW_CCS (bit 16) in the command
streamer.
Fixes: 972282c4cf ("drm/i915/gen12: Add aux table invalidate for all engines")
Requires: 8da173db894a ("drm/i915/gt: Rename flags with bit_group_X according to the datasheet")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725001950.1014671-6-andi.shyti@linux.intel.com
In preparation of the next patch align with the datasheet (BSPEC
47112) with the naming of the pipe control set of flag values.
The variable "flags" in gen12_emit_flush_rcs() is applied as a
set of flags called Bit Group 1.
Define also the Bit Group 0 as bit_group_0 where currently only
PIPE_CONTROL0_HDC_PIPELINE_FLUSH bit is set.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725001950.1014671-5-andi.shyti@linux.intel.com
All memory traffic must be quiesced before requesting
an aux invalidation on platforms that use Aux CCS.
Fixes: 972282c4cf ("drm/i915/gen12: Add aux table invalidate for all engines")
Requires: a2a4aa0eef3b ("drm/i915: Add the gen12_needs_ccs_aux_inv helper")
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725001950.1014671-4-andi.shyti@linux.intel.com
We always assumed that a device might either have AUX or FLAT
CCS, but this is an approximation that is not always true, e.g.
PVC represents an exception.
Set the basis for future finer selection by implementing a
boolean gen12_needs_ccs_aux_inv() function that tells whether aux
invalidation is needed or not.
Currently PVC is the only exception to the above mentioned rule.
Requires: 059ae7ae2a1c ("drm/i915/gt: Cleanup aux invalidation registers")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725001950.1014671-3-andi.shyti@linux.intel.com
Fix the 'NV' definition postfix that is supposed to be INV.
Take the chance to also order properly the registers based on
their address and call the GEN12_GFX_CCS_AUX_INV address as
GEN12_CCS_AUX_INV like all the other similar registers.
Remove also VD1, VD3 and VE1 registers that don't exist and add
BCS0 and CCS0.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725001950.1014671-2-andi.shyti@linux.intel.com
to_i915 is defined as
container_of(dev, struct drm_i915_private, drm);
So for a struct drm_device *dev, to_i915(dev)->drm is just dev. Simplify
accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230721212133.271118-1-u.kleine-koenig@pengutronix.de
i915_request contains direct alias to i915, there is no point to go via
rq->engine->i915.
v2: added missing rq.i915 initialization in measure_breadcrumb_dw.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720113002.1541572-1-andrzej.hajda@intel.com
