Rename PLL field extraction macros to include the associated register name
(`CPG_PLL_CLK1` or `CPG_PLL_CLK2`) to maintain consistency with other PLL
register macros. Update all corresponding macro references accordingly.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Some RZ/V2H(P) SoC variants do not have a GPU, resulting in PLLGPU being
disabled by default in TF-A. Add support for enabling PLL clocks in the
RZ/V2H(P) CPG driver to manage this.
Introduce `is_enabled` and `enable` callbacks to handle PLL state
transitions. With the `enable` callback, PLLGPU will be turned ON only
when the GPU node is enabled; otherwise, it will remain off. Define new
macros for PLL standby and monitor registers to facilitate this process.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Remove the redundant `type` field from `struct pll_clk`, as it is not used
in the PLL clock handling logic.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Refactor PLL handling by introducing a `struct pll` to encapsulate PLL
configuration parameters, ensuring consistency with the existing dynamic
divider structure.
Introduce the `PLL_PACK()` macro to simplify PLL structure initialization
and update the `DEF_PLL()` macro to use the new `pll` structure. Modify
relevant clock register functions to utilize the structured PLL data
instead of raw configuration values.
This refactoring improves code readability, maintainability, and
alignment with the existing clock configuration approach.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add required clocks and resets signals for the TSU IP available on the
Renesas RZ/G3E SoC
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250227122453.30480-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for CRU0 clocks and resets along with the corresponding
divider.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250210114540.524790-2-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Update the error message in `rzv2h_mod_clock_endisable()` to provide
clearer debugging information. Instead of printing only the register
address, include both the `GET_CLK_ON_OFFSET(reg)` offset and the
corresponding `clk` name (`%pC`). This enhances readability and aids
in debugging clock enable failures.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250211105603.195905-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Update the error message in `rzg2l_mod_clock_endisable()` to provide
clearer debugging information. Instead of printing only the register
address, include both the `CLK_ON_R(reg)` offset and the corresponding
`clk` name (`%pC`). This enhances readability and aids in debugging
clock enable failures.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250211105603.195905-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
According to the Rev.1.20 hardware manual for the RZ/Five SoC, the clock
source for HP is derived from PLL6 divided by 2. Correct the
implementation by configuring HP as a fixed clock source instead of a
MUX.
The `CPG_PL6_ETH_SSEL' register, which is available on the RZ/G2UL SoC,
is not present on the RZ/Five SoC, necessitating this change.
Fixes: 95d48d2703 ("clk: renesas: r9a07g043: Add support for RZ/Five SoC")
Cc: stable@vger.kernel.org
Reported-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250127173159.34572-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On the RZ/G3S SoC, the CPU PLL settings can be set and retrieved through
the CPG_PLL1_CLK1 and CPG_PLL1_CLK2 registers. However, these settings
are applied only when CPG_PLL1_SETTING.SEL_PLL1 is set to 0.
Otherwise, the CPU PLL operates at the default frequency of 1.1 GHz.
Hence add support to the PLL driver for returning the 1.1 GHz frequency
when the CPU PLL is configured with the default frequency.
Fixes: 01eabef547 ("clk: renesas: rzg2l: Add support for RZ/G3S PLL")
Fixes: de60a3ebe4 ("clk: renesas: Add minimal boot support for RZ/G3S SoC")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250115142059.1833063-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset entries for the DRP-AI block, which is available only
on the Renesas RZ/V2L SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250106202853.262787-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clocks, resets and power domains for the TSU IP available on the
Renesas RZ/G3S SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250103163805.1775705-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Refactor rzg2l_cpg_attach_dev to delegate clock validation for Runtime PM
to the updated rzg2l_cpg_is_pm_clk function. Ensure validation of clocks
associated with the power domain while excluding external and core clocks.
Prevent incorrect Runtime PM management for clocks outside the domain's
scope.
Update rzg2l_cpg_is_pm_clk to operate on a per-power-domain basis. Verify
clkspec.np against the domain's device node, check argument validity, and
validate clock type (CPG_MOD). Use the no_pm_mod_clks array to exclude
specific clocks from PM management.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216210201.239855-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the missing reset entry for the `SYS` module in the clock driver. The
corresponding core clock entry for `SYS` is already present.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250102181839.352599-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The clock structure for RZ/G3E is almost identical to RZ/V2H SoC with
more IP blocks compared to RZ/V2H. For eg: VSPI, LVDS, DPI and LCDC1
are present only on the RZ/G3E SoC.
Add minimal clock and reset entries required to boot the Renesas RZ/G3E
SMARC EVK and binds it with the RZ/V2H CPG core driver.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/20241213123550.289193-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clocks, resets and power domains for ADC IP available on the Renesas
RZ/G3S SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20241206111337.726244-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the PLLVDO clock and its related CRU clocks and reset
entries in the r9a09g057 CPG driver. Introduce `CLK_PLLVDO` and associated
clocks like `CLK_PLLVDO_CRU0`, `CLK_PLLVDO_CRU1`, `CLK_PLLVDO_CRU2`, and
`CLK_PLLVDO_CRU3`, along with their corresponding dividers.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241202203916.48668-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Update `rzv2h_cpg_attach_dev` to prevent external and core clocks not tied
to the power domain from being managed by Runtime PM. This ensures that
only clocks originating from the domain are controlled, thereby avoiding
unintended handling of external and core clocks.
Additionally, introduce a `no_pm` flag in `mod_clock` and `rzv2h_mod_clk`
structures to exclude specific clocks from Runtime PM when needed. Some
clocks, such as those in the CRU block, require unique enable/disable
sequences that are incompatible with standard Runtime PM. For example,
the CSI-2 D-PHY clock initialization requires toggling individual clocks,
making Runtime PM unsuitable.
The helper function `rzv2h_cpg_is_pm_clk()` checks whether a clock should
be managed by Runtime PM based on this `no_pm` flag. New macros, such as
`DEF_MOD_NO_PM`, allow straightforward declaration of clocks that bypass
PM.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241202203916.48668-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The SYSCTRL module also does reset handling. Start supporting that by
allowing software resets which can then be utilized by a restart
handler. Finally 'reboot' will do something useful on RZ/N1D. Watchdog
support to be added later.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241128091113.24116-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/G3S SoC has 6 SCIF interfaces. SCIF0 is used as debug
console and is already enabled. Add clock, reset and power domain
support for the remaining ones.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241115134401.3893008-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add SSI clocks, resets and power domains support for the SSI blocks
available on the Renesas RZ/G3S SoC.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241113133540.2005850-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
A device_node reference obtained via of_find_node_by_path() requires
explicit calls to of_node_put() after it is no longer required to avoid
leaking the resource.
Instead of adding the missing calls to of_node_put() in all execution
paths, use the cleanup attribute for 'soc' by means of the __free()
macro, which automatically calls of_node_put() when the variable goes
out of scope.
Fixes: 6aa1754764 ("clk: renesas: cpg-mssr: Ignore all clocks assigned to non-Linux system")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241031-clk-renesas-cpg-mssr-cleanup-v2-1-0010936d1154@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The VBATTB IP of the Renesas RZ/G3S SoC controls the clock that is used
by the RTC. The input to the VBATTB could be a 32KHz crystal
or an external clock device.
The HW block diagram for the clock generator is as follows:
+----------+ XC `\
RTXIN --->| |----->| \ +----+ VBATTCLK
| 32K clock| | |----->|gate|----------->
| osc | XBYP | | +----+
RTXOUT --->| |----->| /
+----------+ ,
After discussions w/ Stephen Boyd the clock tree associated with this
hardware block was exported in Linux as:
vbattb-xtal
xbyp
xc
mux
vbattbclk
where:
- input-xtal is the input clock (connected to RTXIN, RTXOUT pins)
- xc, xbyp are mux inputs
- mux is the internal mux
- vbattclk is the gate clock that feeds in the end the RTC
to allow selecting the input of the MUX though assigned-clock DT
properties, using the already existing clock drivers and avoid adding
other DT properties. If the crystal is connected on RTXIN,
RTXOUT pins the XC will be selected as mux input. If an external clock
device is connected on RTXIN, RTXOUT pins the XBYP will be selected as
mux input.
The load capacitance of the internal crystal can be configured
with renesas,vbattb-load-nanofarads DT property.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/20241101095720.2247815-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
While computing foutpostdiv_rate, the value of params->pl5_fracin
is discarded, which results in the wrong refresh rate. Fix the formula
for computing foutpostdiv_rate.
Fixes: 1561380ee7 ("clk: renesas: rzg2l: Add FOUTPOSTDIV clk support")
Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241024134236.315289-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RTC and VBATTB don't share the MSTOP control bit (but only the bus
clock and the reset signal). As the MSTOP control is modeled though power
domains add power domain support for the RTC device available on the
Renesas RZ/G3S SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241019084738.3370489-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
If the watchdog is part of a dedicated power domain (as it may be on
RZ/G3S) the watchdog PM domain need to be powered on in the watchdog
restart handler. Currently, only the clocks are enabled in the watchdog
restart handler. To be able to also power on the PM domain we need to
call pm_runtime_resume_and_get() on the watchdog restart handler, mark
the watchdog device as IRQ safe and register the watchdog PM domain
with GENPD_FLAG_IRQ_SAFE.
Register watchdog PM domain as IRQ safe. Along with it the always-on
PM domain (parent of the watchdog domain) was marked as IRQ safe.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/20241015164732.4085249-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
For watchdog PM domain it is necessary to provide GENPD_FLAG_IRQ_SAFE flag
to be able to power on the watchdog PM domain from atomic context. For
this, adjust the current infrastructure to be able to provide GENPD_FLAG_*
for individual PM domains.
With this, remove the always_on flag from rzg2l_cpg_add_pm_domains() as
it is not necessary anymore.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/20241015164732.4085249-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Move the PM domain power on in rzg2l_cpg_pd_setup(). With this the
previously always-on power domains got
struct generic_pm_domain::{power_on, power_off} populated (and
registered with simple_qos_governor if #power-domain-cells = <1> and
with pm_domain_always_on_gov if #power-domain-cells = <0>). The values for
struct generic_pm_domain::{power_on, power_off} are now populated for
all registered domains but used by core only for the domains that can
use them (the PM domain should be non always-on and registered with
simple_qos_governor). Moreover, the power on/off functions check if the
mstop support is valid. The mstop is populated only by the RZ/G3S
initialization code at the moment.
This approach was chosen to keep the code simple and use the same code
across different implementations. There should be no issues with this
approach as the always on domains are registered with GENPD_FLAG_ALWAYS_ON
and the PM domain core takes care of it.
This approach allows doing further cleanups on the rzg2l_cpg power domain
registering code that will be handled by the next commit.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/20241015164732.4085249-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Early revisions of the R-Car V4M Series Hardware User’s Manual
contained an incorrect formula for the CPU core clocks:
ZCnφ = (PLL2VCO x 1/2) x mult/32
Dang-san fixed this by using CLK_PLL2_DIV2 instead of CLK_PLL2 as the
parent clock.
In Rev.0.70 of the documentation, the formula was corrected to:
ZCnφ = (PLL2VCO x 1/4) x mult/32
As the CPG Block Diagram now shows a separate 1/4 post-divider for PLL2,
the use of CLK_PLL2_DIV2 is a recurring source of confusion. Hence get
rid of CLK_PLL2_DIV2, and include the proper 1/4 post-divider in the
invocation of the DEF_GEN4_Z() macro, like is done on other R-Car Gen4
(and Gen3) SoCs.
Reported-by: Vinh Nguyen <vinh.nguyen.xz@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/0d2789cac2bf306145fe0bbf269c2da5942bb68f.1728377724.git.geert+renesas@glider.be
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all clk drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240909144026.870565-2-u.kleine-koenig@baylibre.com
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add clocks, resets and power domains for USB modules available on the
Renesas RZ/G3S SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240822152801.602318-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use of_property_present() to test for property presence rather than
of_(find|get)_property(). This is part of a larger effort to remove
callers of of_find_property() and similar functions.
of_(find|get)_property() leak the DT struct property and data pointers
which is a problem for dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-4-robh@kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # clk-mstp.c
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The default PLL2/3/4/6 multiplier and divider configurations are no
longer used after the conversion to fixed or variable fractional PLL
clock types.
Note that the default configurations are still documented in the
comments above the individual rcar_gen4_cpg_pll_config instances.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/d13526a86066992d6afdf9bee7c1a18da72f914f.1721648548.git.geert+renesas@glider.be
Currently, all PLLs are modelled as fixed divider clocks, based on the
state of the mode pins. However, the boot loader stack may have changed
the actual PLL configuration from the default, leading to incorrect
clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, PLL4,
and PLL6 as variable fractional PLLs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/3beac7c44534ed153ce7cea5c31f4b0bb7b16ab0.1721648548.git.geert+renesas@glider.be
Currently, all PLLs but PLL2 are modelled as fixed divider clocks, based
on the state of the mode pins. However, the boot loader stack may have
changed the actual PLL configuration from the default, leading to
incorrect clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, PLL4,
and PLL6 as variable fractional PLLs.
Reformat nearby lines to retain a consistent layout.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/b98523ed08de7386944c5ae860eae107dc28be3e.1721648548.git.geert+renesas@glider.be
Currently, all PLLs are modelled as fixed divider clocks, based on the
state of the mode pins. However, the boot loader stack may have changed
the actual PLL configuration from the default, leading to incorrect
clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, and
PLL6 as variable fractional PLLs. Note that the R-Car Gen4 clock driver
does not support variable 9.24 PLLs yet, so the driver will downgrade
them to fixed fractional PLLs, too.
Reformat nearby lines to retain a consistent layout.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/8544571f507e00ed6fc61617d27c9e19de5e9d11.1721648548.git.geert+renesas@glider.be
The custom clock driver that models the PLL clocks on R-Car Gen4
supports only fractional 8.25 PLLs, as used on R-Car V4H/V4M.
R-Car S4-8 uses integer and fractional multiplication fields that are
one bit larger resp. smaller, and a slightly different formula.
Extend the existing support to fractional 9.24 PLL, and introduce new
clock types and helper macros to describe these PLLs.
Note that there is no use case for variable fractional 9.24 PLLs yet, as
the Cortex-A55 cores on R-Car S4-8 do not support High Performance mode.
Hence the PLL is always modeled as a fixed PLL, regardless of the
description,
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/5684eda1260435c8eceabc274e0b18cb280a6341.1721648548.git.geert+renesas@glider.be
The custom clock driver that models PLL clocks on R-Car Gen4 supports
variable clocks, while PLL1 uses a similar control register layout, but
is read-only.
Extend the existing support to fixed clocks and PLL1, and introduce a
new clock type and helper macro to describe a fixed PLL.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/841fbb63d472c357b3ce291a5991db3b847f96d8.1721648548.git.geert+renesas@glider.be
The custom clock driver that models PLL clocks on R-Car Gen4 supports
PLL2 on R-Car V4H/V4M only, while PLL3, PLL4, and PLL6 use the same
control register layout.
Extend the existing support to PLL3, PLL4, and PLL6, and introduce a new
clock type and helper macro to describe these PLLs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/84ead759782560ec5643711e6bdd787a751053ce.1721648548.git.geert+renesas@glider.be
R-Car Gen4 PLLs support fractional multiplication, which can improve
accuracy when configuring a specific frequency.
Add support for fractional multiplication to the custom clock driver
for PLLs, which is currently used only for PLL2 on R-Car V4H.
While at it, add the missing blank line after the function.
Note that Fractional Multiplication is not enabled by the driver,
but used only if the boot loaded enabled it before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/1a58ebef6f54460f49fb81ba9bbf288164de2646.1721648548.git.geert+renesas@glider.be
Improve readability by using the FIELD_GET() helper instead of
open-coding the same operation, and by adding field definitions to get
rid of hardcoded values.
While at it, move register definitions that are only used inside the
rcar-gen4-cpg.c source file out of the rcar-gen4-cpg.h header file.
Add a "CPG_" prefix to SD0CKCR1. Add comments where appropriate.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/fb19ad829738f02effa340fa04c178a162d41202.1721648548.git.geert+renesas@glider.be
The custom clock driver that models the PLL clocks on R-Car Gen4 assumes
the integer and fractional[*] multiplication field sizes as used on
R-Car V4H and V4M, representing a fractional 8.25 number.
Rename the related definitions, functions, and structures to clarify
this, and to prepare for the advent of support for the different field
sizes on R-Car S4-8.
[*] The fractional part is not yet supported.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/2ce9f9c75bfb6312129d416672f9691bbd11c0e7.1721648548.git.geert+renesas@glider.be
Simplify the `rzg2l-cpg` driver by removing explicit passing of `clks` and
`base` parameters in various clock registration functions. These values
are now accessed directly from the `priv` structure.
While at it, drop masking of parent clocks with 0xffff as nothing is ever
stored in the high bits.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240715103555.507767-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
We are using devres APIs for divider, mux and pll5 clocks so for
consistency use the devres APIs for module, fixed factor and PLL clocks.
While at it switched to clk_hw_register() instead of clk_register()
as this has been marked as deprecated interface.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240715103555.507767-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
r8a779h0_core_clks[], r8a779h0_mod_clks[], and cpg_pll_configs[] are
only used during initialization. Hence make them __initconst, so they
will be freed later.
Fixes: f077cab34d ("clk: renesas: cpg-mssr: Add support for R-Car V4M")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/35bbcfb914ddb377fa77e3425e4e7e232c7c2cf9.1720794214.git.geert+renesas@glider.be
Add the PCIe module clock, which is used by the PCIe module on the
Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240704061720.1444755-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock, reset and power domain support for the I2C channels available
on the Renesas RZ/G3S SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240625121358.590547-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/G3S SoC has an IP named Battery Backup Function (VBATTB)
that generates the RTC clock. Add clock, reset and power domain support
for it.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240614071932.1014067-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The multipliers for PLL2 and PLL4 as listed in the comments for
the cpg_pll_configs[] array are incorrect. Fix them.
Note that the actual values in the tables were correct.
Fixes: f077cab34d ("clk: renesas: cpg-mssr: Add support for R-Car V4M")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/07126b55807c1596422c9547e72f0a032487da1e.1718177076.git.geert+renesas@glider.be
Add the VIN module clocks, which are used by the VIN modules on the
Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240606170858.1694652-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the CSI40 and CSI41 module clocks, which are used by the CSI-2
interfaces on the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240527131541.1676525-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the ISPCS0 and ISPCS1 module clocks, which are used by the ISPCS
modules on the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240527131541.1676525-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
