Add support for the video clock controller found on Milos (e.g. SM7635)
based devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250715-sm7635-clocks-v3-11-18f9faac4984@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the graphics clock controller found on Milos (e.g.
SM7635) based devices.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250715-sm7635-clocks-v3-9-18f9faac4984@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the display clock controller found on Milos (e.g.
SM7635) based devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250715-sm7635-clocks-v3-7-18f9faac4984@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the camera clock controller found on Milos (e.g. SM7635)
based devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250715-sm7635-clocks-v3-5-18f9faac4984@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
X1E80100 videocc is identical to the one in SM8550, aside from slightly
different recommended PLL frequencies. Add the separate frequency tables
for that and apply them if the qcom,x1e80100-videocc compatible is used.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250709-x1e-videocc-v2-3-ad1acf5674b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
>From the build perspective, the videocc-sm8550 driver doesn't depend on
having one of the GCC drivers enabled. It builds just fine without the GCC
driver. In practice, it doesn't make much sense to have it enabled without
the GCC driver, but currently this extra dependency is inconsistent with
most of the other VIDEOCC entries in Kconfig. This can easily cause
confusion when you see the VIDEOCC options for some of the SoCs but not for
all of them.
Let's just drop the depends line to allow building the videocc driver
independent of the GCC selection. Compile testing with randconfig will also
benefit from keeping the dependencies minimal.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250709-x1e-videocc-v2-2-ad1acf5674b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the video clock controller for video clients to
be able to request for the clocks on QCS615 platform.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250702-qcs615-mm-v10-clock-controllers-v11-9-9c216e1615ab@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the graphics clock controller for graphics clients to
be able to request for the clocks on QCS615 platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250702-qcs615-mm-v10-clock-controllers-v11-7-9c216e1615ab@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the display clock controller for display clients to
be able to request for the clocks on QCS615 platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250702-qcs615-mm-v10-clock-controllers-v11-5-9c216e1615ab@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the camera clock controller for camera clients to
be able to request for camcc clocks on QCS615 platform.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250702-qcs615-mm-v10-clock-controllers-v11-3-9c216e1615ab@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the camera clock controller for camera clients to
be able to request for camcc clocks on SC8180X platform.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20250512-sc8180x-camcc-support-v4-3-8fb1d3265f52@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the video clock controller found on SM6350 based
devices.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
Co-developed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250324-sm6350-videocc-v2-3-cc22386433f4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are some ipq5018 based device's firmware only can able to boot
arm32 but the clock driver dont allow it to be compiled on arm32.
Therefore allow GCC for IPQ5018 to be selected when building ARM32
kernel
Signed-off-by: Karl Chan <exxxxkc@getgoogleoff.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241007163414.32458-4-exxxxkc@getgoogleoff.me
[bjorn: Updated commit message, per Dmitry's suggestion]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 99c21c7ca6 ("clk: qcom: Add X1P42100 GPUCC driver") adds the
config definition CLK_X1P42100_GPUCC. This config definition selects the
non-existing config CLK_X1E8010_GCC. Note that the config for the X1E80100
Global Clock Controller is CLK_X1E80100_GCC.
Assuming this was just a minor typo in the number, i.e., 8010 instead of
80100, change the definition to select the existing config
CLK_X1E80100_GCC, similarly to the definitions for three configs
CLK_X1E80100_{CAMCC,DISPCC,GPUCC}.
Fixes: 99c21c7ca6 ("clk: qcom: Add X1P42100 GPUCC driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20250107104728.23098-1-lukas.bulwahn@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SM6115 (and its derivatives or similar SoCs) has an LPASS clock
controller block which provides audio-related resets.
Add the required code to support them.
[alexey.klimov] fixed compilation errors after rebase,
slightly changed the commit message
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20241212002551.2902954-3-alexey.klimov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The CMN PLL clock controller supplies clocks to the hardware
blocks that together make up the Ethernet function on Qualcomm
IPQ SoCs and to GCC. The driver is initially supported for
IPQ9574 SoC.
The CMN PLL clock controller expects a reference input clock
from the on-board Wi-Fi block acting as clock source. The input
reference clock needs to be configured to one of the supported
clock rates.
The controller supplies a number of fixed-rate output clocks.
For the IPQ9574, there is one output clock of 353 MHZ to PPE
(Packet Process Engine) hardware block, three 50 MHZ output
clocks and an additional 25 MHZ output clock supplied to the
connected Ethernet devices. The PLL also supplies a 24 MHZ
clock as XO and a 32 KHZ sleep clock to GCC, and one 31.25
MHZ clock to PCS.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-2-c89fb4d4849d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add driver for Display clock controller (DISPCC) in Qualcomm SM8750.
The device has several differences against SM8650, including new Pongo
PLLs and different clock parents, thus no compatibility or driver
re-usage.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250106-sm8750-dispcc-v2-3-6f42beda6317@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The TCSR clock controller found on SM8750 provides refclks
for PCIE, USB and UFS. Add clock driver for it.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-8-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 8-core X1s have a different GPU subsystem compared to their bigger
cousins, including the clocks part. Add the GPU clock controller driver
to drive these.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241221-topic-x1p4_clk-v1-3-dbaeccb74884@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the GPU Clock Controller as used on the SAR2130P and
SAR1130P platforms.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-11-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The display clock controller on SAR2130P is very close to the clock
controller on SM8550 (and SM8650). Reuse existing driver to add support
for the controller on SAR2130P.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-10-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add driver for the Global Clock Controller as present on the Qualcomm
SAR2130P platform. This is based on the msm-5.10 tree, tag
KERNEL.PLATFORM.1.0.r4-00400-NEO.0.
Co-developed-by: Kalpak Kawadkar <quic_kkawadka@quicinc.com>
Signed-off-by: Kalpak Kawadkar <quic_kkawadka@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-8-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Like all other non-ancient Qualcomm clock drivers, QCOM_GDSC is
required, as the GCC driver defines and instantiates a bunch of GDSCs.
Add the missing dependency.
Reported-by: Kamil Gołda <kamil.golda@protonmail.com>
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20241003-topic-6125kconfig-v1-1-f5e1efbff07c@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This driver is compatible with both sm8550 and sm8650, fix the Kconfig
entry to reflect that.
Fixes: da1f361c88 ("clk: qcom: videocc-sm8550: Add SM8650 video clock controller")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241005144047.2226-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support to the SM8475 camera clock controller by extending the
SM8450 camera clock controller, which is almost identical but has some
minor differences.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240818204348.197788-11-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support to the SM8475 video clock controller by extending the
SM8450 video clock controller, which is almost identical but has some
minor differences.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240818204348.197788-9-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support to the SM8475 graphics clock controller by extending the
SM8450 graphics clock controller, which is almost identical but has
some minor differences.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240818204348.197788-7-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support to the SM8475 display clock controller by extending the
SM8450 display clock controller, which is almost identical but has
some minor differences.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240818204348.197788-5-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support to the SM8475 global clock controller by extending the
SM8450 global clock controller, which is almost identical but has some
minor differences.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240818204348.197788-3-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is a very minor difference between display clock controller
drivers for SM8550 and SM8650 platforms. Fold the second one into the
first one to reduce kernel footprint. The bindings for these two
hardware blocks are fully compatible.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-6-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the camera clock controller for camera clients
to be able to request for camcc clocks on SM8150 platform.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240731062916.2680823-8-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the icc-clk framework to enable few clocks to be able to
create paths and use the peripherals connected on those NoCs.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240430064214.2030013-6-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge SM8650 video and camera clock drivers through topic branch, to
make available the DeviceTree binding includes to the DeviceTree source
branches as well.
Add support for the camera clock controller for camera clients to
be able to request for camcc clocks on SM8650 platform.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-8-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clock controller driver of QCA8K depends on MDIO_BUS because
of mdio_module_driver used to register the driver.
This patch fixes the following undefined symbols.
ERROR: modpost: "mdio_driver_register"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "mdio_driver_unregister"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "__mdiobus_write"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "__mdiobus_read"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406161634.B27sOs8B-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202406162047.QkUMa2fG-lkp@intel.com/
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240617093806.3461165-1-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 8cab033628 ("clk: qcom: Add QCM2290 GPU clock controller driver")
adds the config CLK_QCM2290_GPUCC, which intends to select the support for
the QCM2290 Global Clock Controller. It however selects the non-existing
config CLK_QCM2290_GCC, whereas the config for the QCM2290 Global Clock
Controller is named QCM_GCC_2290.
Adjust the config to the intended one.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Fixes: 8cab033628 ("clk: qcom: Add QCM2290 GPU clock controller driver")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240620201431.93254-1-lukas.bulwahn@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
