The imx8m Mini and imx8m Nano both use the same CSIS driver for
interfacing with sensors and cameras. The Mini routes the CSIS
output to the imx7-CSI driver, and the Nano routes the CSIS
through the imx8-isi driver like the one used on the imx8mp.
Enable the drivers necessary to facilitate capture on both of
these two platforms.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This module is used by the Qualcomm sa8775p platform for passing the
reboot reason to the bootloader. Enable building it in the arm64
defconfig as a module.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable ADC driver to be built as a module which will
add support for ADC in TI K3 specific SoCs.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable TSCADC driver to be built as a module which will
add support for TI's TSC/ADC MFDevice.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable TI's SA2UL driver to support security acceleration on TI K3 SoCs.
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables a range of TLMM pinctrl drivers, needed to boot related
platforms. Multimedia clock drivers for MSM8994 and MSM8998 are enabled
and the MSM8996 is flagged as a module instead of builtin.
The PMIC_GLINK drivers are enabled, providing USB Type-C and battery
support on various platforms, and eUSB2 drivers found on SM8550 are
enabled.
Base drivers for IPQ5332 and IPQ9574 are enabled.
-----BEGIN PGP SIGNATURE-----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=9aIE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=slvv
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm ARM64 defconfig updates for v6.4
This enables a range of TLMM pinctrl drivers, needed to boot related
platforms. Multimedia clock drivers for MSM8994 and MSM8998 are enabled
and the MSM8996 is flagged as a module instead of builtin.
The PMIC_GLINK drivers are enabled, providing USB Type-C and battery
support on various platforms, and eUSB2 drivers found on SM8550 are
enabled.
Base drivers for IPQ5332 and IPQ9574 are enabled.
* tag 'qcom-arm64-defconfig-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable IPQ9574 SoC base configs
arm64: defconfig: remove duplicate TYPEC_UCSI & QCOM_PMIC_GLINK
arm64: defconfig: add PMIC GLINK modules
arm64: defconfig: enable Qualcomm pin controller drivers
arm64: defconfig: Enable qcom msm899{4,8} clk drivers
arm64: defconfig: Switch msm8996 clk drivers to module
arm64: defconfig: Enable QCOM eUSB2 SNPS PHY and repeater
arm64: defconfig: Enable IPQ5332 SoC base configs
Link: https://lore.kernel.org/r/20230410155955.5329-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Both configs were already applied by 2 separate changes,
fix this to avoid:
arch/arm64/configs/defconfig:989:warning: override: reassigning to symbol TYPEC_UCSI
arch/arm64/configs/defconfig:1232:warning: override: reassigning to symbol QCOM_PMIC_GLINK
Fixes: 4ffd0b0019 ("arm64: defconfig: add PMIC GLINK modules")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324-topic-sm8450-upstream-defconfig-fixup-v1-1-2d75cc9b3c3d@linaro.org
- Enable support for the Dialog Semiconductor DA7213 Codec, and the
Renesas RZ/V2M xHCI and USB3.1 DRD controllers in the arm64
defconfig,
- Disable support for the obsolete R-Car H3 ES1.* (R8A77950) SoC in
the arm64 defconfig,
- Refresh shmobile_defconfig for v6.3-rc1,
- Enable additional support for RZ/N1 platforms in multi_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZCFJcgAKCRCKwlD9ZEnx
cOjEAP4/lrD9r6ZSsknhf3WgVEuHiSWfLQzMlEUfCBCTPV+LYAD/WvO8Xh/jFPUm
398UvhUK3J8Gn9ZCN2MiXSKmvkI2ZAw=
=CsJt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=uj39
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.4
- Enable support for the Dialog Semiconductor DA7213 Codec, and the
Renesas RZ/V2M xHCI and USB3.1 DRD controllers in the arm64
defconfig,
- Disable support for the obsolete R-Car H3 ES1.* (R8A77950) SoC in
the arm64 defconfig,
- Refresh shmobile_defconfig for v6.3-rc1,
- Enable additional support for RZ/N1 platforms in multi_v7_defconfig.
* tag 'renesas-arm-defconfig-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable RZ/V2M xHCI and USB3.1 DRD controller support
ARM: multi_v7_defconfig: Enable additional support for RZ/N1 platforms
ARM: shmobile: defconfig: Refresh for v6.3-rc1
arm64: defconfig: Disable R-Car H3 ES1.*
arm64: defconfig: Enable DA7213 Codec
Link: https://lore.kernel.org/r/cover.1679907057.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI's K3 platform uses McASP as the digital audio interface on the SoCs.
AM62-SK, AM62-LP-SK and AM62A-SK also use the TLV320AIC3106 codec with a
3.5mm jack for analog audio input and output.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20230313-mcasp_upstream-v10-3-94332149657a@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable drivers used on BeaglePlay[1]:
* MDIO_GPIO driver to workaround erratum i2329, DP83TD510 SPE phy
(enabled in-kernel to ease usage)
* TPS65219 PMIC, regulator as built-in for sd boot and power button
as modules. (note: this is also used by am62x-lp-sk as well)
* BQ32K battery backedup RTC and the K3 RTC drivers as modules
* OMAP2 SPI driver as module for accessing mikrobus
bloat-o-meter reports after this change (v6.3-rc1, clang 17.0.0):
add/remove: 63/2 grow/shrink: 3/0 up/down: 17660/-16 (17644)
[...]
Total: Before=27747186, After=27764830, chg +0.06%
[1] https://beagleplay.org
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230316152143.2438928-4-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Modern versions of FVP_Base_RevC-2xAEMvA contain a Virtio RNG device,
use of which can dramatically speed up the time taken for Linux to
initialize its CRNG, from 10s of seconds in some cases, to instant. This
improves the debug cycle significantly.
However, there are 2 barriers to getting people to use it. The first is
that the defconfig doesn't have the required driver. The second is that
the device is disabled in the device tree (for back-compat since older
versions of the FVP don't have the device). Here we solve the first
issue.
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CAN PHY transceiver driver to be built as a module which will
add support for generic CAN transceivers used by TI K3 specific SoCs.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the PMIC GLINK core, altmode, battery and UCSI
aux drivers as module to enable USB Type-C management
over the PMIC GLINK protocol on modern Qcom platforms.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-12-552f3b721f9e@linaro.org
Enable pin controller drivers for several Qualcomm SoCs, as they are
necessary for basic system functionality:
- main Top Level Mode Multiplexer as built-in for QDU1000, SDM660,
SDM670, SM6125, SM6350 and SM6375.
- Low Power Audio (LPASS) TLMM as module for SC7280, SC8280XP, SM8450
and SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309155733.662043-1-krzysztof.kozlowski@linaro.org
Enable the rest of qcom clk drivers on arm64, enabling as module,
because there is a support for probe defer on the power-domains.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217184239.21450-3-pvorel@suse.cz
Switch to module, because there is a support for probe defer on the
power-domains. This should be working since 2b28a1a84a ("driver core:
Extend deferred probe timeout on driver registration")
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217184239.21450-2-pvorel@suse.cz
In order to have USB 2.0 working on Qualcomm SM8550, both the eUSB2 PHY
and the eUSB2 repeater need to be built as modules.
So select them accordingly.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230320151707.1842171-1-abel.vesa@linaro.org
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230307105645.5285-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
A few bugfixes already came up during the merge window. Samsung, ASpeed,
Spear have minor DT changes, in case of Samsung this fixes a regression
compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci platform,
and we get a few last minute defconfig changes.
-----BEGIN PGP SIGNATURE-----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=ECLF
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few bugfixes already came up during the merge window. Samsung,
ASpeed, Spear have minor DT changes, in case of Samsung this fixes a
regression compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci
platform, and we get a few last minute defconfig changes"
* tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: spear320-hmi: correct STMPE GPIO compatible
ARM: dts: aspeed: p10bmc: Update battery node name
arm64: defconfig: Add IOSCHED_BFQ to the default configs
arm64: defconfig: Fix unintentional disablement of PCI on i.MX
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
MAINTAINERS: make me the maintainer of DaVinci platforms
ARM64 systems are often memory constrained and more often than not
use slow single-channel storage such as flash memory or MMC/SD-cards.
For any interactive systems (such as mobile phones, tablets,
chromebooks...) the BFQ I/O scheduler will be desireable.
Make sure the BFQ I/O scheduler is available on these systems.
ARM (32), Loongarch, MIPS, m68k, UM and S390 has also enabled BFQ in
their defconfigs, cf commit b495dfed70
"um: Cleanup CONFIG_IOSCHED_CFQ" where the motivation is that
it replaces the former CFQ scheduler.
Cc: linux-arm-kernel@lists.infradead.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230224135230.2295826-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A recent update to support PCI endpoint mode on i.MX platforms
unintentionally disabled PCI host support for i.MX in defconfig. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to defconfig
so the PCI_IMX6 ends up getting disabled. Switch defconfig to
PCI_IMX6_HOST to preserve the existing functionality.
Fixes: 75c2f26da0 ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20230220-imx-pci-defconfig-v1-1-2210cf08340e@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ivpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkdQCeOS6N613eggYrXwnbjJhxMQDtKAcAmweK6kXh
3o1IKOYqIMOx5E7zxn6W
=7ajf
-----END PGP SIGNATURE-----
Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
This enables the drivers needed to support USB Type-C based external
display on the SC8280XP laptops. It also enables a couple of core
drivers for the Qualcomm SA8775P platform.
-----BEGIN PGP SIGNATURE-----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=vi5s
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ppMB
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Few more Qualcomm ARM64 defconfig updates for v6.3
This enables the drivers needed to support USB Type-C based external
display on the SC8280XP laptops. It also enables a couple of core
drivers for the Qualcomm SA8775P platform.
* tag 'qcom-arm64-defconfig-for-6.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
arm64: defconfig: Enable DisplayPort on SC8280XP laptops
Link: https://lore.kernel.org/r/20230215051757.1166709-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the pinctrl, GCC clock and interconnect drivers in order to allow
booting SA8775P boards. The drivers need to be built-in for QUPv3 and
subsequently UART console to work.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209103531.469809-1-brgl@bgdev.pl
The QCOM_PMIC_GLINK implements the parts of a TCPM necessary for
negotiating DP altmode and the TYPEC_MUX_GPIO_SBU driver is used for
controlling connection and orientation switching of the SBU lanes in the
USB-C connector Enable these to enable USB Type-C DisplayPort on
SC8280XP laptops.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-5-quic_bjorande@quicinc.com
Here are two more defconfig updates for 6.3, enabling the SM8450 Display
clock controller driver, as well as the SDAM driver, a driver exposing
SRAM on newer Qualcomm PMICs to other devices.
-----BEGIN PGP SIGNATURE-----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=b8rp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QLZQ
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
More ARM64 defconfig updates for v6.3
Here are two more defconfig updates for 6.3, enabling the SM8450 Display
clock controller driver, as well as the SDAM driver, a driver exposing
SRAM on newer Qualcomm PMICs to other devices.
* tag 'qcom-arm64-defconfig-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm SDAM nvmem driver
arm64: defconfig: enable SM8450 DISPCC clock driver
arm64: defconfig: enable the clock driver for Qualcomm SA8775P platforms
arm64: defconfig: enable Visionox VTDR6130 DSI Panel driver
arm64: defconfig: enable SM8550 DISPCC clock driver
arm64: defconfig: enable Qualcomm PCIe modem drivers
arm64: defconfig: Enable SC8280XP Display Clock Controller
arm64: defconfig: Enable GCC, TCSRCC, pinctrl and interconnect for SM8550
arm64: defconfig: enable crypto userspace API
arm64: defconfig: build SDM_LPASSCC_845 as a module
arm64: defconfig: enable camera on Thundercomm RB5 platform
arm64: defconfig: build PINCTRL_SM8250_LPASS_LPI as module
arm64: defconfig: Enable Qualcomm EUD
Link: https://lore.kernel.org/r/20230210181516.2021902-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some Kconfig options has moved around after a 'make savedefconfig' run,
so move them to their new location to make it easier to see what other
options got removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SDAM nvmem driver can be used to access the Shared Direct Access
Memory Module registers in some Qualcomm PMICs.
These registers can specifically be used to store a time offset on
platforms where the PMIC RTC time registers are read-only in order to
allow the RTC time to be updated.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202155448.6715-19-johan+linaro@kernel.org
Enable the TYPEC UCSI support and the Cypress UCSI driver that is used
on the NVIDIA Jetson platforms.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230131175748.256423-7-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable support for restricted DMA pools which provide a level of DMA
memory protection on systems with limited hardware protection
capabilities, such as those lacking an IOMMU.
For instance, mt8192-asurada-spherion makes use of this to provide a
restricted DMA region for WiFi since its MT7921E WiFi card is connected
through PCIe, and the MT8192 SoC doesn't have an IOMMU context for the
PCIe controller.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230130200820.82084-2-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable missing configs in the arm64 defconfig to get all devices probing
on mt8192-asurada based machines.
The devices enabled are: MediaTek Bluetooth USB controller, MediaTek
PCIe Gen3 MAC controller, MT7921E wireless adapter, Elan I2C Trackpad,
MediaTek SPI NOR flash controller, Mediatek SPMI Controller, ChromeOS EC
regulators, MT6315 PMIC, MediaTek Video Codec, MT8192 sound cards,
ChromeOS EC rpmsg communication, all MT8192 clocks.
REGULATOR_CROS_EC is enabled as builtin since it powers the MMC
controller for the SD card, making it required for booting on some
setups.
The MT8192 clocks are enabled as builtin for now since their Kconfigs
are bool, and will be changed to modules after those Kconfigs are
reworked.
Restricted DMA pool support is also required to get working WiFi, but
it is enabled in a separate commit since it alters behavior of other
platforms and devices.
By enabling the support for all of this platform's devices on the
defconfig we make it effortless to test the relevant hardware both by
developers as well as CI systems like KernelCI.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230130200820.82084-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the USB onboard HUB driver, used on Amlogic boards.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230118044418.875-10-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable the GCC clock driver on SA8775P platforms. It needs to be built-in
for console to work.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109174511.1740856-4-brgl@bgdev.pl
Enable the MHI PCI controller driver and the MHI NET and WWAN drivers
for Qualcomm based PCIe modems such as the ones found on the SC8280XP
Compute Reference Design (CRD) and Lenovo Thinkpad X13s.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230115174450.11041-1-johan+linaro@kernel.org
The Display Clock Controller provides clocks and power-domains for
the display subsystem, enable this to enable display on the SC8280XP.
Now that power-domains can probe defer past late_initcall() this should
be possible to leave as module.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111035906.2975494-5-quic_bjorande@quicinc.com
Add the SM8550 GCC, TCSRCC, interconnect and pinctrl drivers as built-in.
All of these are necessary for the Qualcomm SM8550 platform to boot
to shell.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111080254.1181325-1-abel.vesa@linaro.org
Enable CONFIG_CRYPTO_USER so that libkcapi can be used. This was tested
using kcapi-rng on a Qualcomm SA8540p automotive development board.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221214174607.2948497-1-bmasney@redhat.com
i.MX ICC and DEVFREQ driver is required for i.MX8MP normal boot,
because the BLK CTRL power domain driver requires QoS configuraton.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that the EUD (Embedded USB Debugger) block is supported on
several Qualcomm SoCs upstream, enable the same as a module in
the arm64 defconfig as a module.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221231124852.3283597-1-bhupesh.sharma@linaro.org
Enable the Qualcomm SM6115 / SM4250 TLMM pinctrl and GCC clock drivers.
They need to be builtin to ensure that the UART is allowed to probe
before user space needs a console.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128200834.1776868-1-bhupesh.sharma@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables more Qualcomm TLMM pinctrl drivers, and the Qualcomm crypto
drivers.
It makes the SC7180 and SM8450 interconnect drivers builtin, in order to
ensure that a console will be registered before init needs it.
-----BEGIN PGP SIGNATURE-----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=mRnV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wQQD
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for 6.2
This enables more Qualcomm TLMM pinctrl drivers, and the Qualcomm crypto
drivers.
It makes the SC7180 and SM8450 interconnect drivers builtin, in order to
ensure that a console will be registered before init needs it.
* tag 'qcom-arm64-defconfig-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: build-in Qualcomm SC7180 and SM8450 interconnects
arm64: defconfig: Enable Qualcomm QCE crypto
arm64: defconfig: enable rest of Qualcomm ARMv8 SoCs pinctrl drivers
Enable Renesas "Ethernet Switch", Ethernet SERDES and Marvell 10G PHY
drivers to be used by NFS root on the Renesas Spider board.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221118120953.1186392-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable HTE core and tegra HTE provider by default as built in
module.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable missing configs in the arm64 defconfig to get all devices probing
on the mt8183-kukui-jacuzzi-juniper machine.
The devices enabled are: ATH10K SDIO wireless adapter, Elan touchscreen,
cr50 TPM, MediaTek SPI controller, JPEG video decoder, ANX7625 DSI/DPI
to DP bridge (used for the internal display), MT8183 sound cards, SCP
co-processor, MediaTek Global Command Engine (controlled by CMDQ
driver), MediaTek Smart Voltage Scaling (SVS) engine, CCI frequency
and voltage scaling, AUXADC thermal sensors.
All symbols are enabled as modules with the exception of SPI, which is
enabled as builtin since on some platforms like mt8195-cherry, the
ChromeOS Embedded Controller is connected through SPI and it is
responsible for the regulators powering the MMC controller used for the
SD card, and thus SPI support is required for booting.
By enabling the support for all of this machine's devices on the
defconfig we make it effortless to test the relevant hardware both by
developers as well as CI systems like KernelCI.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221109195012.1231059-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MBa8MPxL (with TQMa8MPQL attached) needs this driver for PCIe reference
clock generation. Add it do default config.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable Tegra186 timer support which is needed for Tegra186, Tegra194 and
Tegra234 devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Qualcomm SC7180 and SM8450 SocS, the typical debug console serial
port is part of GENI Serial Engine QUP Wrapper Controller which uses
interconnects. This means that without interconnect drivers, the serial
might not probe. Without serial console, the root might not be mounted
by initramfs:
+ REASON=No init found. Try passing init= bootarg. PS1=(initramfs
...
(initramfs) run-init -c /dev/console -n /root /sbin/init
run-init: opening console: No such file or directory
This means that interconnect drivers on these Qualcomm SoCs cannot be
modules and must be built-in to mount rootfs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221021032702.1340963-1-krzysztof.kozlowski@linaro.org
Now that the QCE crypto block is supported on several
Qualcomm SoCs upstream, enable the same as a module in the
arm64 defconfig.
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921045602.1462007-5-bhupesh.sharma@linaro.org
Enable generic PCM loopback driver.
On NVIDIA Jetson platforms, customers use this to loop data between
container based applications and host OS.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable RT5640 and TAS2552 audio codec drivers.
NVIDIA Jetson platforms have 40-pin GPIO expanders where custom
audio cards can be connected. Support for above codecs is typically
required. Also NVIDIA Jetson AGX Orin platform has RT5640 as onboard
codec. To support these enable driver build for these codecs.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable SNVS LPGPR support. This may e.g. be used on the i.MX 8M Mini and
Plus to store a form of boot counter.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
- arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE
vector granule register added to the user regs together with SVE perf
extensions documentation.
- SVE updates: add HWCAP for SVE EBF16, update the SVE ABI documentation
to match the actual kernel behaviour (zeroing the registers on syscall
rather than "zeroed or preserved" previously).
- More conversions to automatic system registers generation.
- vDSO: use self-synchronising virtual counter access in gettimeofday()
if the architecture supports it.
- arm64 stacktrace cleanups and improvements.
- arm64 atomics improvements: always inline assembly, remove LL/SC
trampolines.
- Improve the reporting of EL1 exceptions: rework BTI and FPAC exception
handling, better EL1 undefs reporting.
- Cortex-A510 erratum 2658417: remove BF16 support due to incorrect
result.
- arm64 defconfig updates: build CoreSight as a module, enable options
necessary for docker, memory hotplug/hotremove, enable all PMUs
provided by Arm.
- arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME
extensions).
- arm64 ftraces updates/fixes: fix module PLTs with mcount, remove
unused function.
- kselftest updates for arm64: simple HWCAP validation, FP stress test
improvements, validation of ZA regs in signal handlers, include larger
SVE and SME vector lengths in signal tests, various cleanups.
- arm64 alternatives (code patching) improvements to robustness and
consistency: replace cpucap static branches with equivalent
alternatives, associate callback alternatives with a cpucap.
- Miscellaneous updates: optimise kprobe performance of patching
single-step slots, simplify uaccess_mask_ptr(), move MTE registers
initialisation to C, support huge vmalloc() mappings, run softirqs on
the per-CPU IRQ stack, compat (arm32) misalignment fixups for
multiword accesses.
-----BEGIN PGP SIGNATURE-----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=jl3Z
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE
vector granule register added to the user regs together with SVE perf
extensions documentation.
- SVE updates: add HWCAP for SVE EBF16, update the SVE ABI
documentation to match the actual kernel behaviour (zeroing the
registers on syscall rather than "zeroed or preserved" previously).
- More conversions to automatic system registers generation.
- vDSO: use self-synchronising virtual counter access in gettimeofday()
if the architecture supports it.
- arm64 stacktrace cleanups and improvements.
- arm64 atomics improvements: always inline assembly, remove LL/SC
trampolines.
- Improve the reporting of EL1 exceptions: rework BTI and FPAC
exception handling, better EL1 undefs reporting.
- Cortex-A510 erratum 2658417: remove BF16 support due to incorrect
result.
- arm64 defconfig updates: build CoreSight as a module, enable options
necessary for docker, memory hotplug/hotremove, enable all PMUs
provided by Arm.
- arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME
extensions).
- arm64 ftraces updates/fixes: fix module PLTs with mcount, remove
unused function.
- kselftest updates for arm64: simple HWCAP validation, FP stress test
improvements, validation of ZA regs in signal handlers, include
larger SVE and SME vector lengths in signal tests, various cleanups.
- arm64 alternatives (code patching) improvements to robustness and
consistency: replace cpucap static branches with equivalent
alternatives, associate callback alternatives with a cpucap.
- Miscellaneous updates: optimise kprobe performance of patching
single-step slots, simplify uaccess_mask_ptr(), move MTE registers
initialisation to C, support huge vmalloc() mappings, run softirqs on
the per-CPU IRQ stack, compat (arm32) misalignment fixups for
multiword accesses.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (126 commits)
arm64: alternatives: Use vdso/bits.h instead of linux/bits.h
arm64/kprobe: Optimize the performance of patching single-step slot
arm64: defconfig: Add Coresight as module
kselftest/arm64: Handle EINTR while reading data from children
kselftest/arm64: Flag fp-stress as exiting when we begin finishing up
kselftest/arm64: Don't repeat termination handler for fp-stress
ARM64: reloc_test: add __init/__exit annotations to module init/exit funcs
arm64/mm: fold check for KFENCE into can_set_direct_map()
arm64: ftrace: fix module PLTs with mcount
arm64: module: Remove unused plt_entry_is_initialized()
arm64: module: Make plt_equals_entry() static
arm64: fix the build with binutils 2.27
kselftest/arm64: Don't enable v8.5 for MTE selftest builds
arm64: uaccess: simplify uaccess_mask_ptr()
arm64: asm/perf_regs.h: Avoid C++-style comment in UAPI header
kselftest/arm64: Fix typo in hwcap check
arm64: mte: move register initialization to C
arm64: mm: handle ARM64_KERNEL_USES_PMD_MAPS in vmemmap_populate()
arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()
arm64/sve: Add Perf extensions documentation
...
Add Coresight to defconfig so that build errors are caught.
CONFIG_CORESIGHT_SOURCE_ETM4X is excluded because it depends on
CONFIG_PID_IN_CONTEXTIDR which has a performance cost.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220922142400.478815-2-james.clark@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The selection of PMUs enabled in the defconfig is currently a bit random
and does not include a number of those provided by Arm and present in a
fairly wide range of SoCs. Improve coverage and defconfig utility by
enabling all the Arm provided PMUs by default.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220919162753.3079869-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enables the new MGBE driver, as well as the existing SPI and QSPI
drivers on 64-bit ARM. The GPC DMA driver is now also built into the
kernel by default to avoid needless probe deferrals that would slow
down the boot process significantly.
-----BEGIN PGP SIGNATURE-----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=wtaF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Hr4N
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration changes for v6.1-rc1
Enables the new MGBE driver, as well as the existing SPI and QSPI
drivers on 64-bit ARM. The GPC DMA driver is now also built into the
kernel by default to avoid needless probe deferrals that would slow
down the boot process significantly.
* tag 'tegra-for-6.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Make TEGRA186_GPC_DMA built-in
arm64: tegra: Enable Tegra SPI & QSPI in deconfig
arm64: defconfig: Enable Tegra MGBE driver
Link: https://lore.kernel.org/r/20220916101957.1635854-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the driver SDHCI support for the Synopsys DWC MSHC
controller which can be found on Rockchip 356x SoCs.
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20220922192050.2031-1-linux.amoon@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Let's enable ACPI_HMAT, ACPI_HOTPLUG_MEMORY, MEMORY_HOTPLUG
and MEMORY_HOTREMOVE for more test coverage, also there are
useful for heterogeneous memory scene.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220629093524.34801-1-wangkefeng.wang@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The selection of PMUs enabled in the defconfig is currently a bit random
and does not include a number of those provided by Arm and present in a
fairly wide range of SoCs. Improve coverage and defconfig utility by
enabling all the Arm provided PMUs by default.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220919162753.3079869-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enable sc8180x global clock controller, tlmm, interconnect and edp phy
drivers which are required for sc8180x like Lenovo Flex 5G laptop to
boot.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220916124214.3881948-1-vkoul@kernel.org
please pull the following:
- William completes the removal of ARCH_BCM4908 by removing that Kconfig
entry from the defconfig since it is being deleted after having been
transitional through 6.0
-----BEGIN PGP SIGNATURE-----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=Uw1u
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DF0K
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.1/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64 defconfig changes for 6.1,
please pull the following:
- William completes the removal of ARCH_BCM4908 by removing that Kconfig
entry from the defconfig since it is being deleted after having been
transitional through 6.0
* tag 'arm-soc/for-6.1/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: remove BCM4908
Link: https://lore.kernel.org/r/20220915023044.2350782-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Make TEGRA186_GPC_DMA driver as built-in since the clients using the
DMA (like I2C_TEGRA etc) are built-in. This would avoid the potential
long delay probe deferral can cause.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Devfreq cooling device framework is used in Panfrost
to throttle GPU in order to regulate its temperature.
Enable this driver for ARM64 SoC.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220906153034.153321-2-peron.clem@gmail.com
Commit 566e373fe0 ("arm64: Kconfig.platforms: Group NXP platforms
together") introduced a new symbol ARCH_NXP and made ARCH_LAYERSCAPE
(among others) depend on it, but didn't enable it in the defconfig.
Thus, now the defconfig doesn't include support for any NXP
architectures anymore. Fix it.
Fixes: 566e373fe0 ("arm64: Kconfig.platforms: Group NXP platforms together")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 96796c914b ("arm64: Kconfig.platforms: Re-organized Broadcom
menu") introduced a new symbol ARCH_BCM and made all of the Broadcom
SoCs Kconfig depend on it, but did not enable it in the defconfig.
Thus, now the defconfig doesn't include support for any Broadcom
architectures anymore. Fix it.
Fixes: 96796c914b ("arm64: Kconfig.platforms: Re-organized Broadcom menu")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220906033957.4377-1-f.fainelli@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the driver for the Multi-Gigabit Ethernet (MGBE) controller which
can be found on NVIDIA Tegra234 SoCs.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In the commit 617d32938d ("rpmsg: Move the rpmsg control device
from rpmsg_char to rpmsg_ctrl"), we split the rpmsg_char driver in two.
By default give everyone who had the old driver enabled the rpmsg_ctrl
driver too.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Refresh shmobile_defconfig for v6.0-rc1,
- Enable additional support for Renesas platforms in the arm64
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYxHFsQAKCRCKwlD9ZEnx
cFnnAP0WWCnx50+oodGIJfcpb/QDcmXXVPa4EVrf92TvgqWrCQD+Nel3En9EYaWr
wt+GR2aZpa+E9Kfa9OovTzUWzvHiXw8=
=fwbH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jebc
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v6.1
- Refresh shmobile_defconfig for v6.0-rc1,
- Enable additional support for Renesas platforms in the arm64
defconfig.
* tag 'renesas-arm-defconfig-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Refresh for v6.0-rc1
Link: https://lore.kernel.org/r/cover.1662111126.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 788961462f ("ARM: psci: cpuidle: Enable PSCI CPUidle
driver") the generic ARM cpuidle driver probe no longer worked on
ARM64. It was however left enabled with the driver failing to probe
successfully. However the commit 51280acad8 ("cpuidle: cpuidle-arm:
remove arm64 support") removed the Kconfig option so that it is no
longer enabled for arm64 platforms.
Drop the disabled/unavailable ARM_CPUIDLE from the defconfig.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220822121604.2213778-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).
Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.
The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
General setup --->
Platform selection --->
Kernel Features --->
Boot options --->
Power management options --->
CPU Power Management --->
[*] ACPI (Advanced Configuration and Power Interface) Support --->
[*] Virtualization --->
[*] ARM Accelerated Cryptographic Algorithms --->
(or)
[*] ARM64 Accelerated Cryptographic Algorithms --->
...
-*- Cryptographic API --->
Library routines --->
Kernel hacking --->
and moves into the Cryptographic API menu, which now contains:
...
Accelerated Cryptographic Algorithms for CPU (arm) --->
(or)
Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*] Hardware crypto devices --->
...
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk drivers
that are still under review and will be merged through the corresponding
subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC
on the main chip, plus an I/O chip and memory in the same
-----BEGIN PGP SIGNATURE-----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=7Id+
-----END PGP SIGNATURE-----
Merge tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
Some configs can obviously be removed when sync'ing with savedefconfig, as
follows:
- config SECCOMP was changed to def_bool y in commit 282a181b1a ("
seccomp: Move config option SECCOMP to arch/Kconfig"), so no need to
explicitly enable in the defconfig.
- config MAILBOX is already selected by some drivers enabled in the
defconfig, so no need to explicitly enable.
- config QRTR was enabled in the defconfig from commit 1bdf91fd2a ("
arm64: defconfig: Enable Qualcomm QRTR"). However until many kernel
versions later in commit 231a136fdf ("arm64: defconfig: enable ath11k
driver"), no driver depended on config QRTR - not for building anyway.
In commit 231a136fdf, config ATH11K_PCI was enabled and this selects
config QRTR, so there is no need to explicitly enable in the defconfig.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1658827473-121156-1-git-send-email-john.garry@huawei.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A number of Kconfig options have moved around in the defconfig
file over time. Move them to the place that they 'savedefconfig'
puts them at now, to better see which options are now gone
for some reason.
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables a few of the core drivers needed to boot the 8cx Gen 3
platform and demotes the Qualcomm USB PHY drivers to modules, as they
don't need to be builtin.
-----BEGIN PGP SIGNATURE-----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=KJ5v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CCqT
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig more updates for v5.20
This enables a few of the core drivers needed to boot the 8cx Gen 3
platform and demotes the Qualcomm USB PHY drivers to modules, as they
don't need to be builtin.
* tag 'qcom-arm64-defconfig-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Demote Qualcomm USB PHYs to modules
arm64: defconfig: Enable Qualcomm SC8280XP providers
Link: https://lore.kernel.org/r/20220720230140.2113129-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm USB PHYs are not critical for reaching the ramdisk to load
modules, so they can be demoted to be built as such instead of builtin.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220712031821.4134712-1-bjorn.andersson@linaro.org
The Qualcomm SC8280XP need the global clock controller, interconnect
provider and TLMM pinctrl in order to boot. Enable these as builtin, as
they are needed in order to provide e.g. UART.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220707161014.3178798-1-bjorn.andersson@linaro.org
This enables the drivers for the Light Pulse Generator and Bandwidth
Monitor hardware, found in a wide variety of Qualcomm PMICs and SoCs.
It enables interconnect providers for MSM8996, QCS404 and SC7180 and it
enables the USB PHYs for the QCS404 platform.
-----BEGIN PGP SIGNATURE-----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=DyUm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=/elF
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for v5.20
This enables the drivers for the Light Pulse Generator and Bandwidth
Monitor hardware, found in a wide variety of Qualcomm PMICs and SoCs.
It enables interconnect providers for MSM8996, QCS404 and SC7180 and it
enables the USB PHYs for the QCS404 platform.
* tag 'qcom-arm64-defconfig-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm Bandwidth Monitor
arm64: defconfig: Enable qcom interconnect drivers
arm64: defconfig: Enable qcom ss & hs usb phy
arm64: defconfig: enable Qualcomm LPG leds driver
Link: https://lore.kernel.org/r/20220712031812.1275182-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.10, please pull the following:
- Nicolas enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William enables the newly introduced CONFIG_ARCH_BCMBCA 64-bit ARM
counterpart to support the newly added BCA SocS
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmLMTRAACgkQh9CWnEQH
BwQz0g/8CNkPeei1X2dq8tifxJErV2PhKYCDGN4qR3WreLmJB5+92El0eNd3Co4b
KvnewRm3mdgJr+zvXUMHWNPAvP9I654Lx+zYBj6WXha5atIyXPaDtg18oNxJSEJ8
v8PrWB6wl5b1KGOsCFBaG5oRwNfsVQl3Tu7fq2ExaVdj6DQQOOQ0P1dH890X0jaH
CswCGPm9yNPrqwYD6VOcSb/lKUYA2wwFUuHur9OCtcm8UsqEito6jb7kbvcm0iNY
GFwI1EYgjc6qvs/PWVbhcQ9ZxOimGk5ra/+TyIw92IB0TI3eRC97bRUP3idqoE1F
KvihcxpluYWavfnDyLK/EzFkoykU1HNHQ8kK7kgsQZm/m0KiXchw15j5MR2FXB6H
jC3ww5aKc0OMfwiyMZ9y08oaBZ4rPHTkQqlguG5JFx2DdZhgVK9OgsakIguS6g8/
uNOOogHlNa1d45wkOkFo27D4h1F/LtAwbjBu/0ohh/hNBRfOAucO9nkIsxmK2DvE
+McMZWv3kw0C3/s7E1Dz9WElXs5X9cCusvvKC0i4l8LZ4BEi2JczeXm00B5qy/bR
mgBikFHNOwwPUNl8h8QtFk2aqaEqqWD5L3/LzLXyaqljKz/9LlHMwVkNtx2o4dJ4
x0xixwvzFEC5DATDNqv+6fu+FZZl9LyhWO4M2TV3gJgoCO40JJQ=
=QpXj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLN4vMACgkQmmx57+YA
GNlVGhAAloVYJxQdzUHWSiwKSMdDEY7RnNrM2WhCaDZ/PB/9PasZLNFf85LDvMmE
dPhJhM0HQqSL890KvNTLYcUV215/U5XEsa+1ga/xTbBN6raLDMAIcg5XSGUnn3kA
Lc/InDUedg5v/RURc903rj9qLKjjChYd2SZmse/lSWYNC/Ix0o8KWsr3UMIw+Suh
rDYrlg+CRLO+jGSrQ4vFbHkr081fW+vYwqoLvXrC9aRtC4qNNE0hcmvX7T7Bl89Y
bRBZmDr7zLd+e4ouPKuko2k6StHdc22V9EOTpEWHhgrR91VNEsrdq6Lp2xET8nC5
kr+rbn05yCz+Wr+pSysjBPDjubrCdNcHlwlX57cZq2GWI1AONAfH0JOdvFVh3pBa
ah6ZV0ze8RKw1h5UB+s7FfxoponxDyN3G846uL9vP9TcfyObMDjiU34sA0qXVHWa
K4KWchYImJeulhbx3JUt5GRsG/OccXq8aQTZVRJPhLTvO5wRO+4shqFW18gubSX/
lbw8mFSMRw/cju4kK4/zzJMhV+8Mz6WsXfZOU+YmewKnM2Em0Nz8qUOXIDqtChF8
MhejMTYni7ZViULwaG1xUZuvRHvPh15DpOUMbHkLe8bJydGUzMiXacfN8K434nvh
AAMglDMCdRBk+LKecATGf+Ell/l6XIuTHX6VZfQkNV6z11BHJUU=
=oVJK
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig changes
for 5.10, please pull the following:
- Nicolas enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William enables the newly introduced CONFIG_ARCH_BCMBCA 64-bit ARM
counterpart to support the newly added BCA SocS
* tag 'arm-soc/for-5.20/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable DRM_V3D
arm64: defconfig: enable bcmbca soc support
Link: https://lore.kernel.org/r/20220711164451.3542127-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the Qualcomm Bandwidth Monitor to allow scaling interconnects
depending on bandwidth usage between CPU and memory. This is used
already on Qualcomm SDM845 SoC.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-4-krzysztof.kozlowski@linaro.org
Allwinner provide an audio CODEC as part of their SoCs which is used on a
number of designs, enable the driver as part of defconfig in order to
improve coverage of this in the various automated testing systems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220701112213.1765599-1-broonie@kernel.org
While enabling QCS404 interconnect driver, I found that other drivers
are missing too, so add all the interconnect driver
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628045454.621175-2-vkoul@kernel.org
These phys are used for USB controller found in QCS404 board, so enable
them in the defconfig
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628045454.621175-1-vkoul@kernel.org
Enable gpio-fan support as this is needed by phyBOARD-Polis-i.MX8M Mini.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
BCM2711, the SoC used on the Raspberry Pi 4 has a different GPU than its
predecessors. Enable it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable i.MX93 clk and pinctrl driver for booting the system
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Output Processing Engine (OPE) module is a client of AHUB on Tegra210
and later generations of Tegra SoCs. Enable the driver build to use
this in audio path.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable CONFIG_ARCH_BCMBCA in defconfig. This config can be used to build
a basic kernel for arm64 based Broadcom Broadband SoC booting to
console.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This enables the GPI DMA driver, providing access to I2C and SPI
controllers that are setup for shared ownership. The PCIe Gen2 PHY
provides PCI support on the QCS405 platform, among others. The PMIC
watchdog, concell and ADC5 ThermalMonitor drivers provides housekeeping
services on a range of different platforms.
The Display and Video clock controllers for SM8250 are enabled, as is
the audio RX/TX macros and the WCD9335 audio codec driver.
Lastly the Ath11k driver, used on a variety of modern boards and the
FastRPC driver, which provides an interface for computational offloading
on the Hexagon cores, are enabled.
All drivers, except the SM8250 Display and Video clock controller
drivers are enabled as modules. The two clock controllers provides
power-domains and must be builtin to reduce the risk of probe deferral
happening (and being ignored) after late initcall.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmJ5SNcbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FzLcQAKVGBX+PCuv8jK5gO2JH
rgiLcrQz5CaS5U/nVXxtKZDyh2JuLPpv2o8BwILuEvOfol5SZ/19uxZdhPew/MCo
1af9EIWNeI+Eu95y154cQ1BYSvt1GLVY9RxMEIGTGNRw7Tlm/NXEI1tFUT/U6Fow
veU63k98oYseQsots55j+OsMDc91DVBCBRW/VPCm3OJU7X5huy66RMK9ofvRlQAL
pmVFOl8VW0d+GuLfNP8UxgV/Ck9PEsU4XIDF62LBj7MRr/zBRTYPfCi7PWihNy8r
iT1v3x2PQRmmRSqgpNmWnazfoXt1+jeOvpNkKtJ5GOiuJpDiSBlBAWqnq18mEs7m
8vrBFq0zVsU9u+fxFN1tLbCZyvet7Q7UnJ9dMb3qg6bN4oWS8NVDXFlQq69thQ1w
llYvQqo1K9jrj8jd8vRaBjOcoVi0UFoVbOxdMG1tAqVW1iAWXY+BvUdOs5NLebQx
t8hd7FXFkvHCXJztJQEO3Loa9K/nDfMySkpDrWBtuS9S3kswZrQ9BdiVSSu5Ca4d
4FG+6TORM/PEc+AGNnnLWdLbbYoOva3togZknndMZwGaTAOX7762lLudUipX2iLi
HEeMOeVNEg7ttCFnVNZKYdrMGGT0TB3Nv2PgbfiZW5QFsOLiwrKz8Pi5Pp0qZChj
UuVnkZznTyW3u2MatDZ5SYt5
=BrN9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=BAuz
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for v5.19
This enables the GPI DMA driver, providing access to I2C and SPI
controllers that are setup for shared ownership. The PCIe Gen2 PHY
provides PCI support on the QCS405 platform, among others. The PMIC
watchdog, concell and ADC5 ThermalMonitor drivers provides housekeeping
services on a range of different platforms.
The Display and Video clock controllers for SM8250 are enabled, as is
the audio RX/TX macros and the WCD9335 audio codec driver.
Lastly the Ath11k driver, used on a variety of modern boards and the
FastRPC driver, which provides an interface for computational offloading
on the Hexagon cores, are enabled.
All drivers, except the SM8250 Display and Video clock controller
drivers are enabled as modules. The two clock controllers provides
power-domains and must be builtin to reduce the risk of probe deferral
happening (and being ignored) after late initcall.
* tag 'qcom-arm64-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm GPI DMA Driver
arm64: defconfig: Enable Qualcomm PCIe Gen2 PHY
arm64: defconfig: Enable SM8250 video clock controller
arm64: defconfig: Enable PM8916 watchdog driver
arm64: defconfig: enable ath11k driver
arm64: defconfig: Enable some Qualcomm drivers
arm64: defconfig: reenable SM_DISPCC_8250
arm64: defconfig: enable wcd9335 codec as module
arm64: defconfig: enable Qualcomm RX and TX macro for SM8250 audio
Link: https://lore.kernel.org/r/20220509170158.311962-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable the WM8524 codec driver as module in arm64 defconfig for audio
support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmJ3OOMUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM43JwgAgKOb0UndVfyEOV02LPQoVYiEN0P9
cKbenz/IpXFT0fDYyTezg1BmU7T5KH4dg8R40JZdmeOjhEkpigXs1EEVEeBy9Dws
j7RjV+vL/i4shN4j6dYXsWGxLf3E96eNIqMfy4kRfJygTbg/99sgC/YT29OI1TJO
uyJJHqmBvLcfG4kAoYc3W17PM37JD9T6A3DvDZTn5PRgBd8ywK5ydyrqgKgTG6f9
CD6nIyW396rC26+v0Gzrc/0zgxGjLJznD2iiGxyR8Sa6ILYdyXQEIsK5XOst9/PS
E0EnM3HA3icr1bvUUyztdRBuRlYq/BR73GCAWHSpi55Nfh5bT3dCHrpZwQ==
=kFqE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pAvl
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.19:
- Enable the WM8524 codec driver as module in arm64 defconfig for audio
support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.
* tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable the WM8524 codec driver
ARM: imx_v6_v7_defconfig: Enable the ADC part of the STMPE MFD
Link: https://lore.kernel.org/r/20220508033843.2773685-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the driver for the new ASRC audio block that is found on
Tegra186 and later.
-----BEGIN PGP SIGNATURE-----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=U3ik
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=hc0y
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration updates for v5.19-rc1
This enables the driver for the new ASRC audio block that is found on
Tegra186 and later.
* tag 'tegra-for-5.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Build Tegra ASRC module
Link: https://lore.kernel.org/r/20220506143005.3916655-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable support for the Renesas RZ/G2UL and RZ/V2M SoCs in the arm64
defconfig,
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYnTXKQAKCRCKwlD9ZEnx
cEqvAQCfbX325WAM/lkE6m11gjJCKSbGj3rwHWzigSiTfnaU4gEAnXHWOTFFLej4
l20hPHLNRdG4uG7+yObmpWU8hAX57wA=
=tJKF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=o8bh
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.19 (take two)
- Enable support for the Renesas RZ/G2UL and RZ/V2M SoCs in the arm64
defconfig,
* tag 'renesas-arm-defconfig-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable Renesas RZ/V2M SoC
arm64: defconfig: Enable ARCH_R9A07G043
Link: https://lore.kernel.org/r/cover.1651828601.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
imx8mn-evk has a WM8524 codec.
Enable the WM8524 codec driver so that audio can be functional
on this board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Enable support for the Renesas RZ/V2L SoC and the Maxim MAX96712
Quad GMSL2 Deserializer in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.18-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYmJ3AwAKCRCKwlD9ZEnx
cNa0APwJIXP3GulpMvVC07l9MISB0TuMIKJr7hpix4FWR3UgdAD/Qb4uzseyOt7P
OR1bifu1lIXrha/ABr3dhZr77B2DYwQ=
=9bw+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=W1C7
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.19
- Enable support for the Renesas RZ/V2L SoC and the Maxim MAX96712
Quad GMSL2 Deserializer in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.18-rc1.
* tag 'renesas-arm-defconfig-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.18-rc1
arm64: defconfig: Enable Maxim MAX96712 Quad GMSL2 Deserializer support
arm64: defconfig: Enable ARCH_R9A07G054
Link: https://lore.kernel.org/r/cover.1650638503.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Key devices that support displays on SoCs like the Komeda DRM driver, the
older HDLCD were not enabled by default and should be so displays can work
out of the box on defconfig. Also Candence I2C support should be enabled so
the PHY and thus displays can work too.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Link: https://lore.kernel.org/r/20220427114200.111904-1-carsten.haitzler@foss.arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the Renesas RZ/V2M SoC and the uart it uses.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Link: https://lore.kernel.org/r/20220330154024.112270-12-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable DRM and PHY configs required for supporting
DisplayPort on J721e
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20220426152926.20953-1-r-ravikumar@ti.com
Asynchronous Sample Rate Converter (ASRC) module is a client of AHUB on
Tegra186 and later SoCs. To use this module enable the driver build.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the charger and regulator driver for the
MT6360 PMIC. These drivers are essential for
some MediaTek MT8195 based boards to boot properly.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20220415150003.1793063-5-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The PMIC regulators are essentials to be able to
boot MediaTek MT8195 based boards to userspace.
Like the other MediaTek PMIC regulator driver,
let's enable as well the one for the MT6359 PMIC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20220415150003.1793063-4-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Qualcomm GPI DMA Driver is used for DMA transfers for Serial engines
like Geni I2C and SPI.
Enable this dma driver
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220225044033.1376769-1-vkoul@kernel.org
The Qualcomm QCS404 platform uses the PCIe Gen2 PHY, enable the driver
for this to ensure that PCIe is functional.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20220217040205.1898644-1-bjorn.andersson@linaro.org
Enable the building of the sm8250 video clock controller by default.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220131202721.2122605-2-dmitry.baryshkov@linaro.org
Enable coincell, fastrpc, mailbox and adc-tm5 drivers to be built as
modules. These driver are used on many of Qualcomm platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220131165056.2117434-1-dmitry.baryshkov@linaro.org
CONFIG_SM_DISPCC_8250 is not enabled by default, but it is still
necessary for the Qualcomm RB5 board. Reenable it (as it was enabled
before the commit dde8cd786e ("arm64: defconfig: rebuild default
configuration")).
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Fixes: dde8cd786e ("arm64: defconfig: rebuild default configuration")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220404215913.1497172-1-dmitry.baryshkov@linaro.org
Enable CONFIG_SND_SOC_WCD9335 to built as module. This enable audio
codec used on the Qualcomm Dragonboard820c device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220403211329.1410725-1-dmitry.baryshkov@linaro.org
After a somewhat quiet 5.17 release, the size of the DT changes
is a bit larger again. There are nine new SoC that get added,
all of them related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the
LG Nexus 5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs,
along with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC losely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added all
over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91, Allwinner,
i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)
-----BEGIN PGP SIGNATURE-----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=v98T
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
Enable the driver for the Layerscape SFP (Security Fuse Processor) found
on most Layerscape SoCs. For example, a per-device unique serial number
is stored in the fuses.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Build the CVP driver in the standard arm64 defconfig.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
- Enable the new Audio Graph Card2 driver which can handle sound cards
more flexibly in the arm64 defconfig,
- Disable unneeded 8250 serial options in shmobile_defconfig,
- Enable additional support for Renesas platforms in the arm64
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYgZfpgAKCRCKwlD9ZEnx
cM5XAP4nyb1rxKQpDWbdozSOmItkytpfC2+NTS9+Ul0mAVz98QD/YfuW1awSR8EE
6iyGVM2WqFbaKKGNEqogHI2eNGvbyAk=
=HkeI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=G8H0
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.18
- Enable the new Audio Graph Card2 driver which can handle sound cards
more flexibly in the arm64 defconfig,
- Disable unneeded 8250 serial options in shmobile_defconfig,
- Enable additional support for Renesas platforms in the arm64
defconfig.
* tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Disable unneeded 8250 serial options
arm64: defconfig: Enable Audio Graph Card2 driver
Link: https://lore.kernel.org/r/cover.1644587198.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add a new defconfig for Cortex-M based i.MXRT family.
- A series from Marcel Ziswiler to rebuild arm64 defconfig with
'savedefconfig', and then enable various relevant options needed by
Toradex verdin-imx8mm device.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmIUkysUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7+rwgAh6O4IeWd9PFgNsocVV5gjJUSr3HE
N6kODKwbd6xbVt+JA6kAUfhqaDAOO5daicnB+BIjTxnttflZXxpER10G5HBZL1qH
ACglN1NQPzz38RzfeJd/PaNqixMFsOdn4RsHbwQicX8aHUBP7MpfFh0FT50/fpgo
nYeW5itpyvcSHzTrmgXNveriVz7/UiE5i/0FSvwEjjraD2hWVFI3nZgHFtzQcVhe
KLD8Q8f1bH40wEAH4KAlWY0m5VD5jmnAkeRMlvYzWnKaG1sl2gsZlGb1w1zOrC41
lD+mU/SvcNoe4Bupn3J6BjA1MISfaKClYWbJ0iOVj3S6RUQKC8ToUxHVJA==
=ozsC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ce1L
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.18:
- Add a new defconfig for Cortex-M based i.MXRT family.
- A series from Marcel Ziswiler to rebuild arm64 defconfig with
'savedefconfig', and then enable various relevant options needed by
Toradex verdin-imx8mm device.
* tag 'imx-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable verdin-imx8mm relevant drivers as modules
arm64: defconfig: build r8169 as a module
arm64: defconfig: build imx-sdma as a module
arm64: defconfig: enable imx8m pcie phy driver
arm64: defconfig: enable bpf/cgroup firewalling
arm64: defconfig: rebuild default configuration
arm64: defconfig: re-order default configuration
arm64: defconfig: enable pcieaer configuration
arm64: defconfig: enable taskstats configuration
ARM: imxrt_defconfig: Add i.MXRT family defconfig
Link: https://lore.kernel.org/r/20220222075226.160187-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable drivers for USB and SERDES IPs on TI K3 SoC
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmHEEI0QHHZpZ25lc2hy
QHRpLmNvbQAKCRDERh5FfJEW4+qvB/9bn7oXiHF0tdkgeFu1naq0gIBXbcbH6xxU
O9EAbRlVn3NC6XApDx/KuKaIHtogjV4n+PkLaStLcyBd3SYEB2k/VvnKI0IFlhPG
L8u+t6O5/pNUK9MZzT6+VsY67CAOHjdy/kU83UboD4EsgXn2NS0EosGTQFs/RCVt
0LQONv5+6Tu8UaBg0tt3r6Q6THMcSsLzqCVfMZgehhCOJmk1yQ/7VeiFZtJr0RX5
M1G+IWYhgaWNpzO3AAxkM3iWXo3xL7vDi8eNhMX1nSLygfkQ4TSyoYHxo32VfoWH
U9js6HwDj7+KaPDfvGlkGW/4vjGgPiFN/iJXTGEeFZdap41jc9aN
=L/gY
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OX1P
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-config-for-v5.17-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/defconfig
ARM64 defconfig changes for TI K3 platforms for v5.17 merge window:
- Enable drivers for USB and SERDES IPs on TI K3 SoC
* tag 'ti-k3-config-for-v5.17-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable USB controller drivers for TI K3 SoC
Link: https://lore.kernel.org/r/20211223094040.15349-1-vigneshr@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable various drivers which support peripherals as found on the
Verdin iMX8M Mini et al. computer/system on modules:
- CONFIG_CAN_MCP251XFD
At least one Microchip MCP2518FDT SPI CAN controller which this driver
also supports may be found on the Verdin iMX8M Mini computer/system on
module.
- CONFIG_BT_HCIUART_MRVL, CONFIG_BT_MRVL, CONFIG_BT_MRVL_SDIO and
CONFIG_MWIFIEX_SDIO
The AzureWave AW-CM276NF which these Bluetooth and Wi-Fi drivers also
support may be found on the Verdin iMX8M Mini (as well as the Apalis
iMX8, Colibri iMX8X and Verdin iMX8M Plus for that matter) computer/
system on module.
- CONFIG_SENSORS_LM75
The TI TMP75C temperature sensor which this driver also supports may be
found on the Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for
that matter) computer/system on module.
- CONFIG_SND_SOC_NAU8822
The Nuvoton Technology Corporation (NTC) NAU88C22YG which this driver
also supports may be found on the Verdin Development Board a carrier
board for the Verdin family of computer/system on module which the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
may be mated in.
- CONFIG_TI_ADS1015
The TLA2024 ADC which this driver also supports may be found on the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
computer/system on module.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Build Realtek Gigabit Ethernet driver as a module.
Network cards based on chipsets this driver supports are ubiquitous both
in regular PCIe as well as mini-PCIe and nowadays even various M.2
formats. It is therefore a suitable card to be used for any kind of PCIe
and/or Gigabit Ethernet testing. As it is not designed in, just enabling
it as a module seems most suitable.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This avoids the following systemd warning:
[ 2.618538] systemd[1]: system-getty.slice: unit configures an IP
firewall, but the local system does not support BPF/cgroup firewalling.
[ 2.630916] systemd[1]: (This warning is only shown for the first
unit using IP firewalling.)
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Run "make defconfig; make savedefconfig" to rebuild defconfig.
This dropped the following configuration options which are nowaday's
already enabled (resp. disabled) by default:
CONFIG_MEMCG_SWAP=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_FSL_MC_BUS=y
CONFIG_QCOM_SCM=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_XHCI_PCI=m
CONFIG_SDM_GCC_845=y
CONFIG_SM_DISPCC_8250=y
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
CONFIG_COMMON_CLK_ZYNQMP=y
CONFIG_POWER_AVS was renamed to POWER_AVS_OMAP in commit bca815d620
("PM: AVS: smartreflex Move driver to soc specific drivers"). As there
are no 64-bit Arm OMAPs it getting dropped seems fair.
Note that the following user-selectable configuration options have been
preserved:
CONFIG_SECCOMP=y
CONFIG_SLIMBUS=m
CONFIG_INTERCONNECT=y
CONFIG_CONFIGFS_FS=y
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_PCIEAER which is required for CONFIG_ACPI_APEI_PCIEAER.
Commit 8c8ff55b4d ("PCI/AER: Don't select CONFIG_PCIEAER by default")
changed it to no longer being enabled by default.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_TASKSTATS which is required for CONFIG_TASK_XACCT (and
subsequently CONFIG_TASK_IO_ACCOUNTING). Previously, taskstats got
pulled in by KVM but that got changed in commit 63b3f96e1a
("kvm: Select SCHED_INFO instead of TASK_DELAY_ACCT").
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Renesas RSPI, RZ/G2L thermal, RZ/G2L WDT watchdog, and OSTM timer,
as used on the RZ/G2L SMARC EVK board,
- R-Car Image Signal Processor (ISP) and Display Unit embedded MIPI
DSI encoder on R-Car V3U, as used on the Falcon board.
All of the above are modular, except for thermal, watchdog, and timer.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c9800d67f91a90d418a3ce44c59109ae0a87b2d8.1643373223.git.geert+renesas@glider.be
Enable the following drivers as modular:
- NAND controller with CONFIG_MTD_NAND_BRCMNAND
- AHCI/SATA controller driver with CONFIG_AHCI_BRCM
- Starfighter 2 Ethernet switch driver with CONFIG_NET_DSA_BCM_SF2
- USB drivers (OHCI, EHCI, XHCI) with CONFIG_USB_BRCMSTB
- Watchdog with CONFIG_BCM7038_WDT
- PWM with CONFIG_PWM_BRCMSTB
- SYSTEMPORT Ethernet controller with CONFIG_SYSTEMPORT
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The MediaTek CPUFreq driver provides control of CPU frequency/voltage
on MediaTek SoCs. Since there's no device-tree node to bind it to, the
driver needs to be enabled built-in. Enable it so.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20211217154452.868419-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The MT6397 RTC is part of the Mediatek MT6397 PMIC, which is present in
the mt8173-elm base board.
The driver for the PMIC is already enabled through CONFIG_MFD_MT6397, so
enable just the driver for the RTC.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20211217162445.876034-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable Cadence USB, TI USB and required SERDES drivers to support USB on
TI K3 SoCs.
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/r/20211221152140.15151-1-vigneshr@ti.com
Add the SM8450 GCC config as built-in so that platform can boot to shell
with defconfig
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211216065444.650357-2-vkoul@kernel.org
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9iKYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6Giwf+OjKD1fwYzsSRFVyY5m+Vn1iZANCi
sXb5mVQks435oeBV44O5AEsaTLb+qQEyFQZBL6IdbIlPm+LwHu2GYTn2F84bilww
vO7mVbIpeh7bInD3eELWdrE6BdhcsenlLi3Tg0oeMQ7HAk4FT7GzcWk2laVemOnU
RoWjTn0S97Bh4aWfGEg22c+wfh1Egp6rLmHxaXCUJDrCexyA4CLZ6+r/ZgFUlb2q
FbdmPyjPnasiyM1RsY+hWY6dELl8xJwNg8hCA1DBddDsDLj8gMYXvZmR3oYHOG/1
/6Z4y6gbJ7NK9h4xPvjJ/XCdlXaEpZAIwr3OB+aEpCIXHNTaTzQL3v240A==
=BPLr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAoR8ACgkQmmx57+YA
GNncjBAAtHr7vQaai+8++OPDb3xwvABT1s2PxQ9m3JXvzxPfIjEMA+jp3Y4R2OM+
fu91HhdqHM/fRFHOMegDWWg8GObsOr2grLoC0QpZqySaXZUhD1btPpR4K70qC712
klf7GV3lqxk7hjLJvTSfiBJrHbpqZqCisXrV9kRiSQTaIE8556phzHejs1MhSmeE
RffrU1H7Z2gPyc0TiuOl52QmOIDkUknl5EQ+rXpADjVtzBdSjZ/MjarzLxX+cTKI
qxjI4dfe+9OJoKfIAGbeoV6s8jEYLs2TS4IopH3c8rH1gaGa18+kw/FdzZwOx0ak
Js3XasuRcQwwKwg3ijDpvfDOD0q21yl7u/6kYVDk8JV14q/2Ow/755wCYTBSS69m
u5FyZFmOZQ7bYx17IAs8hJ9JgPvviIr9SSVtezei6mBTYqrMZPeT+5OFV+xFO8CV
648gxeiSVPi1f0Nht3P0Pxi3dlj8G64g0tvwcMetMSQeaoKGxnevL7n2HVG13EUW
pBCirF9HpETiXxEQTI2HFhl9h3zCFjnYJjay354CWW3gndi3iE1Rdc7ItwMBgzCD
bqjcBcZ4M7TShi7T47S3VWMheJ9POrhVVpnYxXBe2b5hkn24zwh+cZu1Xhc8JSoW
HQ5VtnlMnTLlzOjN33O+I4YOZPuIPJ14XCmAA2Mr+1RZvqIbhOE=
=rJsW
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.17:
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
* tag 'imx-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2
arm64: defconfig: enable drivers for booting i.MX8ULP
arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx
arm64: defconfig: Enable OV5640
arm64: defconfig: Enable VIDEO_IMX_MEDIA
Link: https://lore.kernel.org/r/20211218071427.26745-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the device tree in place, enable missing drivers as modules, if
possible. PHY driver needs built-in for interrupt support.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Beacon EmbeddedWorks imx8mm development kit has a TD Next 5640
Camera. Enable the OV5640 driver to use the camera.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To use a camera, the CSIS and CSI drivers need to be enabled with
VIDEO_IMX_MEDIA.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The major change here is the disabling of the firmware loades user space
fallback, this is done as arm64 is the only platform with this flag
enabled and as a result doesn't play nice with standard distributions.
It then enables the new limits driver, which controls the hardware based
thermal mitigation on a range of Qualcomm platforms. The prima/pronto
WiFi and Bluetooth drivers are enabled to ensure these features works
out of the box, now that the last details in the dts are landed.
The new driver for acquiring sleep stats is enabled to facilitate the
various efforts on getting these platforms into low power mode.
Lastly the base SC7280 drivers needed to simply boot this platform are
enabled.
-----BEGIN PGP SIGNATURE-----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=xuCz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DfL5
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfigs
Qualcomm ARM64 defconfig updates for v5.16
The major change here is the disabling of the firmware loades user space
fallback, this is done as arm64 is the only platform with this flag
enabled and as a result doesn't play nice with standard distributions.
It then enables the new limits driver, which controls the hardware based
thermal mitigation on a range of Qualcomm platforms. The prima/pronto
WiFi and Bluetooth drivers are enabled to ensure these features works
out of the box, now that the last details in the dts are landed.
The new driver for acquiring sleep stats is enabled to facilitate the
various efforts on getting these platforms into low power mode.
Lastly the base SC7280 drivers needed to simply boot this platform are
enabled.
* tag 'qcom-arm64-defconfig-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm LMH driver
arm64: defconfig: Enable Qualcomm prima/pronto drivers
arm64: defconfig: Enable Sleep stats driver
arm64: defconfig: Enable QTI SC7280 pinctrl, gcc and interconnect
arm64: defconfig: Disable firmware sysfs fallback
Link: https://lore.kernel.org/r/20211026134953.1204327-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the introduction of LMH in '36c6581214c4 ("arm64: dts: qcom:
sdm845: Add support for LMh node")' the CPUfreq gained a reference for
the two interrupts from the LMh. This means that if the LMh driver isn't
enabled CPUfreq will not probe and there's no frequency scaling.
Enable LMh to make CPUfreq functional again on SDM845.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Reviewed-and-Tested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20211017204036.2761122-1-bjorn.andersson@linaro.org
The Qualcomm prima/pronto drivers consists of a remoteproc driver boot
the combined WiFi and Bluetooth firmware on the related co-processor, a
control driver to load calibration and settings firmware, the wcn36xx
WiFi driver and the SMD based Bluetooth driver.
Enable these in the defconfig to provide Bluetooth and WiFi on devices
such as the Qualcomm Dragonboard 410c.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211008192840.3593362-1-bjorn.andersson@linaro.org
Enable the QTI SC7280 pinctrl, gcc and interconnect drivers required
for kernel to boot to console.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007052812.3717-1-quic_saipraka@quicinc.com
Part of the enablement of SDMA on the IMX platforms, '7f4e4afa140c
("arm64: defconfig: Enable SDMA on i.mx8mq/8mm")' also enabled
CONFIG_FW_LOADER_USER_HELPER_FALLBACK, to allow "firmware loaded by
udev".
Unfortunately having the fallback enabled does, due to the 60 second
timeout, essentially requiring userspace to provide a firmware loader.
But systemd dropped the support for this interface back in 2014 and
because arm64 is the only architecture that has this enabled, there
doesn't seem to be any standard solution available.
Examples of this problem can be found in e.g. the ath10k driver, which
with a standard distro can take about 10 minutes before wlan0 appears.
The alternative to this patch would be to change these drivers to use
firmware_request_direct(), to avoid the sysfs fallback. But that would
prevent other systems, such as Android, to rely on a userspace firmware
loader to pick the firmware from a non-standard place, with just a
custom defconfig.
This patch therefor attempts to align the arm64 defconfig will all other
architectures in the upstream kernel.
Cc: Robin Gong <yibin.gong@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210930215300.60290-1-bjorn.andersson@linaro.org
This enables drivers for the various audio processors found on Tegra210
and later.
-----BEGIN PGP SIGNATURE-----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=v2qB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7sxf
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfigs
arm64: tegra: Default configuration changes for v5.16-rc1
This enables drivers for the various audio processors found on Tegra210
and later.
* tag 'tegra-for-5.16-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable few Tegra210 based AHUB drivers
Link: https://lore.kernel.org/r/20211008201132.1678814-8-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable configs for following modules:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
These configs are used on Tegra186 and later SoCs as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Per commit 4a9a1a5602 ("arm64: socfpga: merge Agilex and N5X into
ARCH_INTEL_SOCFPGA") and commit 89d4f98ae9 ("ARM: remove zte zx
platform"), they can be dropped from defconfig now.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work
with fw_devlink. So, always compile it in for CONFIG_OF and delete the
config since it's no longer necessary.
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Qualcomm Robotics RB3 Development Kit has a Renesas USB HUB on one
of the PCIe busses, which requires the releated driver to be enabled to
provide functional Ethernet and additional USB host ports.
-----BEGIN PGP SIGNATURE-----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=IzP1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=9k89
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Additional Qualcomm ARM64 defconfig udpate for v5.14
The Qualcomm Robotics RB3 Development Kit has a Renesas USB HUB on one
of the PCIe busses, which requires the releated driver to be enabled to
provide functional Ethernet and additional USB host ports.
* tag 'qcom-arm64-defconfig-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable renesas usb xhci pci host controller
Link: https://lore.kernel.org/r/20210621165015.943060-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
96Boards RB3 has a USB XHCI PCI Renesas host controller. This controller
requires firmware to be loaded on its ROM/RAM, so enable the module
CONFIG_USB_XHCI_PCI_RENESAS. This depends on CONFIG_USB_XHCI_PCI so
enable that as well.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210615081749.3210344-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This enables VADC, audio codecs and Venus (video decoder) found on
MSM8916 among others and the SM8350 interconnect provider driver.
-----BEGIN PGP SIGNATURE-----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=Uyjq
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig udpates for v5.14
This enables VADC, audio codecs and Venus (video decoder) found on
MSM8916 among others and the SM8350 interconnect provider driver.
* tag 'qcom-arm64-defconfig-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: add drivers needed for DragonBoard410c
arm64: defconfig: qcom: enable interconnect for SM8350
Link: https://lore.kernel.org/r/20210614223704.393042-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Set MMC_MTK as built-in to be able to boot from MMC device.
-----BEGIN PGP SIGNATURE-----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=MS0W
-----END PGP SIGNATURE-----
Merge tag 'v5.13-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
- Delete MTK_PMIC_WRAP added twice.
- Set MMC_MTK as built-in to be able to boot from MMC device.
* tag 'v5.13-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: defconfig: Allow Mediatek boards to boot from the mmc
arm64: defconfig: Do not override the MTK_PMIC_WRAP symbol
Link: https://lore.kernel.org/r/ad6f7f4e-7e4d-08b9-8781-71bd78444929@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the Exynos UFS controller and PHY configs. They need to be
buildin to ensure UFS devices gets detected on exynos7 and its
variant boards.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210531170057.7730-1-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
There is a clock driver that's needed when using an external
USB reference clock called usb2_clksel.
Enable it in the defconfig.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-3-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Most Layerscape SoCs support ECC error reporting for the memory
controller. Enable the corresponding module. In particular, this will
enable EDAC support on the Kontron sl28 board which comes with ECC
memory.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the MMC_MTK option necessary to boot Mediatek boards from the
mmc. Booting from the mmc is the common method used for a bunch of
boards, specially Chromebooks, to boot from. Hence this driver is
built-in.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210423075250.2616275-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Commit 'fbbe38309d56 ("arm64: defconfig: Allow mt8173-based boards to boot
from usb")' added the MTK_PMIC_WRAP config built-in. It needs to be
built-in in order to be able to boot from USB or the MMC without needing
a ramdisk, but that symbol was already defined as a module so now we are
getting the following warning:
arch/arm64/configs/defconfig:996:warning: override: reassigning to symbol MTK_PMIC_WRAP
Remove the MTK_PMIC_WRAP=m from the defconfig to remove the error.
Fixes: fbbe38309d ("arm64: defconfig: Allow mt8173-based boards to boot from usb")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210423075201.2616023-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the merge commit
and on the AsahiLinux wiki.
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=pBZy
-----END PGP SIGNATURE-----
Merge tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Apple M1 platform support from Arnd Bergmann:
"The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the commit message of
commit 1bb2fd3880 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the
AsahiLinux wiki"
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
* tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
asm-generic/io.h: Unbork ioremap_np() declaration
arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree
dt-bindings: display: Add apple,simple-framebuffer
arm64: Kconfig: Introduce CONFIG_ARCH_APPLE
irqchip/apple-aic: Add support for the Apple Interrupt Controller
dt-bindings: interrupt-controller: Add DT bindings for apple-aic
arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h
of/address: Add infrastructure to declare MMIO as non-posted
asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np
arm64: Implement ioremap_np() to map MMIO as nGnRnE
docs: driver-api: device-io: Document ioremap() variants & access funcs
docs: driver-api: device-io: Document I/O access functions
asm-generic/io.h: Add a non-posted variant of ioremap()
arm64: arch_timer: Implement support for interrupt-names
dt-bindings: timer: arm,arch_timer: Add interrupt-names support
arm64: cputype: Add CPU implementor & types for the Apple M1 cores
dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles
dt-bindings: arm: apple: Add bindings for Apple ARM platforms
dt-bindings: vendor-prefixes: Add apple prefix
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=iidq
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
The usual set of defconfig updates, enabling newly added drivers.
There are platform updates for at91, omap, ux500 and qcom platforms,
and a number of changes to the arm64 defconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmCC2JgACgkQmmx57+YA
GNnhJxAAgKJ7MC1GgBIVOu8ynl0vEK3baT7JuQRtFGMkWOkN8W9Z5GHemRSHsFfw
z7T9nWRQ6xs6iPbw9fTe0K2xcZBKaeSTn76rUUmuRizDFbm3oaqEI0i3v+7ZMIgA
l2CNed5P5JUAU4kKjxT2UKCTFDT0IdNyEIkHwoMbsT8qMhiD6YCLuQzClH9S6qKX
hjcTmHaeTeeJGaWHUQw0GIO9b1DO4JSx2e0rFcbrMp2yYr0XZIS1VPlBCbgwS3Yu
JbIXmAbm2Liq31zQS7ollxz4xpYIKavpF9cSDOeTezmid0+R/RZhuisHj5CVOgzi
TbGQWGk5DUMo5ca1lkYdL1jhM3hBeHNgi12S8AOHSvYQ4QZ5tKE3kW2azyUUESw+
zcMK6GvJd47oCQHUqdUuhMWb1jhnyV4oLNxe60m9MdBB+062fIStS9XvJXwIBoqa
2DK74pV6vFoX0NBoLKVjyEzFNmKwK2esZgaRZt4ylXb5ouLkvAjhK2A9TMz8VoOh
l0M1aSF8hA3NOlUszpzoeOe+nnwaiTupwPpwVWQuhpjAutbp4ceCSzOVaDMYEa8K
Pd3WEUeriWOnAAgBjON7PA1gQtfA5YTAL4AHfEK84UbEau9rcGmcEQKhZT3VyXf7
k779kIDXoZthLVMD2xuyVRdae5Yyca3Y3EkSTmKmWiYVbHI/4WE=
=SauY
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"The usual set of defconfig updates, enabling newly added drivers.
There are platform updates for at91, omap, ux500 and qcom platforms,
and a number of changes to the arm64 defconfig"
* tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: configs: qcom_defconfig: Reduce CMA size to 64MB
ARM: configs: qcom_defconfig: Enable GLINK SMEM driver
ARM: configs: qcom_defconfig: Enable SDX55 interconnect driver
ARM: configs: qcom_defconfig: Enable Q6V5_PAS remoteproc driver
ARM: configs: qcom_defconfig: Enable CPUFreq support
ARM: configs: qcom_defconfig: Enable SDX55 A7 PLL and APCS clock driver
ARM: configs: qcom_defconfig: Enable APCS IPC mailbox driver
ARM: configs: Remove REGULATOR_USERSPACE_CONSUMER
ARM: configs: ux500: Update for new drivers
arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks
arm64: defconfig: Allow mt8173-based boards to boot from usb
ARM: configs: at91: Modernize UBI defconfig part
ARM: configs: at91: Add USB Video webcam class
ARM: configs: at91: Add mtd tests as modules
ARM: configs: at91: sama5: Add audio MIKROE PROTO board
ARM: configs: at91: sama5: Enable LAN78XX as module
ARM: configs: at91: sama5: PIOBU as built-in
ARM: configs: at91: sama5: MCP16502 regulator as built-in
ARM: configs: at91: sama5: enable the Hantro G1 engine
ARM: configs: at91: sama5: update with savedefconfig
...
This enables the SM8350 TLMM and GCC drivers, needed to boot the
platform.
-----BEGIN PGP SIGNATURE-----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=3aF9
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig udpate for 5.13
This enables the SM8350 TLMM and GCC drivers, needed to boot the
platform.
* tag 'qcom-arm64-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SM8350 TLMM and GCC
Link: https://lore.kernel.org/r/20210404164841.712845-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a Kconfig option to toggle support for Apple ARM SoCs.
At this time this targets the M1 and later "Apple Silicon" Mac SoCs.
Signed-off-by: Hector Martin <marcan@marcan.st>
-----BEGIN PGP SIGNATURE-----
iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmBlnlIXHG1hdHRoaWFz
LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH5Nkw/+Mt30yAu6DNJAw6rUT61l7l1a
UEiexX5JC3Vzj8FCGueLJLRfHa/OF+Frk/VQwbGLGIo1N8cgkhn1kzQm87bGQ3rT
6avjCAUqCnoh1jmefkO65+7qFfP4f/3OiQDaBsQ59EWucQ/jPvLmsG/hVUuf1iw8
cXLdryXG/ysAYoAQyhNKMVFSL0VN2OTvz3jUEOGLT7uOIv08parG6lDKfkm3nN3F
kqXQ6tSU2efpLUo59DbJaZbjI6+HOAjWvswMvSIEyVUc7RFacJDqOdOdgtqnIHjE
t4x7Crovgx8yDic702qrfm28bDiHBeSntymuyTG2ooprre/YZgjxqipGu0p00ZCz
SFZ7s8OG9hWfDxyp1i9kh1v1nEX4YCfQGV95mXVaxPTRa/e9j/NeRiQI1IXG75S/
kzLfbHuoMtWz4JtW23Qa7NpgbqBpvV/lfEicdu1jOXJFgW3BOuJabuWvxYl5xx3v
iPNrxGmhPFMLq/3wRtpNRtcx+xulgtXKl3xIe0yxQh3azhRBiJUV2KHMEDj1mDoq
E8I23lp2rPfoU1yIvfPcqMPHHtqRQpvmvnuKjl4gegyT0znkzoy4Z9ExpWpjnbY3
o1QTrYtiIVW/yS8lh+g9hSTuRrE9VaygGgSYALeb8WPWTipH2PMlASPl/G4O9JT4
ChSB66EUEYC4BVWd1Ds=
=g3jG
-----END PGP SIGNATURE-----
Merge tag 'v5.12-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
Enable option to boot MediaTek based chromebook (mt8173 and mt8183) with defconfig
* tag 'v5.12-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks
arm64: defconfig: Allow mt8173-based boards to boot from usb
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It includes a number of arm64 defconfig update for i.MX8 devices
support. The following ones might deserve some notes.
- Although Hantro decoder driver are sitting in staging, people already
find it's quite useful on i.MX8M devices.
- i.MX PCIe driver has no option for module build.
- REALTEK_PHY becomes a built-in driver, because it's used on quite some
i.MX8 reference boards where people want to boot via NFS.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBj9KcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5o5wgAhADJ5eUxUD1yrgU7P8aa/WY7QjLD
XluMFtpAaI9cXAXX3cy/4JpCb9tTXMisyvG/Kr9bt+PVQOHK892U1nybdkX+VBAC
CNTfIbHYKxHE3CdkjGqIk4CA+vx+wH151bwZThWrkiBAE5Oaqcb3aVmmcFGLUvfr
MB1JAW8dsTk3+0bmYcpRtMfFxPWoSDtgGtAQANqpROJGlJ5cv/DlDTmqbgsu8Yc4
pyjBeeKkJTc9bXw2LxVHS3H7Ozew4rJ0hEdsYWwU7emYVQzu2di9kwfnMkzDZS7F
Zxifjyen4TVWqFgxUQ3dng8B3d2tQvs6ini3b1Q5fLe5lkHTPWunIuMpAQ==
=FfMm
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.13:
It includes a number of arm64 defconfig update for i.MX8 devices
support. The following ones might deserve some notes.
- Although Hantro decoder driver are sitting in staging, people already
find it's quite useful on i.MX8M devices.
- i.MX PCIe driver has no option for module build.
- REALTEK_PHY becomes a built-in driver, because it's used on quite some
i.MX8 reference boards where people want to boot via NFS.
* tag 'imx-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: configs: enable FlexTimer alarm timer
arm64: configs: Select REALTEK_PHY as built-in
arm64: configs: Enable PCIe support for imx8mq boards
arm64: defconfig: Enable the Hantro decoder
arm64: defconfig: add imx8qm pinctrl support
arm64: defconfig: Enable wm8960 audio driver.
arm64: defconfig: Enable asoc simple mux
arm64: defconfig: Enable devfreq support for i.MX8MQ
Link: https://lore.kernel.org/r/20210331041019.31345-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are some Mediatek based Chromebooks supported in the kernel. Enable the
required config options to have the panel display working on both devices.
This was tested on the ACER Chromebook R13 (MT8173) and the Lenovo
Ideapad Duet (MT8183), but should also enable display support for similar
devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210331090659.4169966-2-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the option necessary to boot mt8173-based boards to boot from
usb devices, like its phy and the regulators needed to have proper
support.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210331090659.4169966-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This driver is used on Layerscape SoCs to wake up the system from
standby. It works in conjunction with the RCPM driver. The latter is
only available as a builtin.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On the i.MX8MP EVK board there is a RTL8211 EThernet PHY and
a typical use case is to boot via NFS. In this case the Ethernet
PHY driver needs to be built-in, so select the driver as built-in
by default.
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable in defconfig two Intel ARM64 architectures: the eASIC N5X SoCFPGA
and Keem Bay SoC. This allows compile coverage when building default
config.
For the N5X (and Agilex) enable also DesignWare SPI controller in MMIO.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and
SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From
the Linux kernel point of view these are flavors of the same
architecture so there is no need for three top-level arm64
architectures. Simplify this by merging all three architectures into
ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries.
The side effect is that the INTEL_STRATIX10_SERVICE will now be
available for both 32-bit and 64-bit Intel SoCFPGA, even though it is
used only for 64-bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Enable PCI_IMX6 to get PCI support for imx8mq boards like imx8mq-evk,
imx8mq-kontron-pitx-imx8m and imx8mq-zii-ultra.
The driver only has build-in support and cannot be compiled as module.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the Hantro decoder driver so it can be enabled by
default on i.MX8M and Rockchip platforms.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We've had DEBUG_INFO enabled for arm64 defconfigs since the initial
commit. This is probably not that frequently used but substantially
inflates the size of the build tree and amount of I/O needed during the
build. This was causing issues with storage usage in some automated CI
environments which don't expect defconfigs to be quite this big, and
generally increases the resource consumption for both them and people
doing local builds. The main use case for the debug info is decoding
things with scripts/faddr2line but that doesn't need the full
DEBUG_INFO, DEBUG_INFO_REDUCED is enough for it, so enable that by
default.
Without this patch my build tree is 6.8G, with it the size drops to 2G
(smaller than the 6.4G for allmodconfig!).
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210304174407.17537-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Except MX8QM pinctrl driver is missing, all other necessary drivers
for a booting are reused from MX8QXP which are already enabled
in defconfig.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This driver is used by the Nitrogen8m Mini SBC.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is needed to model the mic input mux on the Librem 5 devkit.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is needed to make DRAM frequency scaling via devfreq as used
on the Librem 5 and Librem 5 Devkit.
With the interconnect support enabled we now need imx devfreq on top
to make this work.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the Qualcomm SM8350 TLMM pinctrl and GCC clock drivers. They need
to be builtin to ensure that the UART is allowed to probe before user
space needs a console.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210306021021.1173860-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Pull HID updates from Jiri Kosina:
- support for "Unified Battery" feature on Logitech devices from Filipe
Laíns
- power management improvements for intel-ish driver from Zhang Lixu
- support for Goodix devices from Douglas Anderson
- improved handling of generic HID keyboard in order to make it easier
for userspace to figure out the details of the device, from Dmitry
Torokhov
- Playstation DualSense support from Roderick Colenbrander
- other assorted small fixes and device ID additions.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (49 commits)
HID: playstation: add DualSense player LED support.
HID: playstation: add microphone mute support for DualSense.
HID: playstation: add initial DualSense lightbar support.
HID: wacom: Ignore attempts to overwrite the touch_max value from HID
HID: playstation: fix array size comparison (off-by-one)
HID: playstation: fix unused variable in ps_battery_get_property.
HID: playstation: report DualSense hardware and firmware version.
HID: playstation: add DualSense classic rumble support.
HID: playstation: add DualSense Bluetooth support.
HID: playstation: track devices in list.
HID: playstation: add DualSense accelerometer and gyroscope support.
HID: playstation: add DualSense touchpad support.
HID: playstation: add DualSense battery support.
HID: playstation: use DualSense MAC address as unique identifier.
HID: playstation: initial DualSense USB support.
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E
HID: Ignore battery for Elan touchscreen on HP Spectre X360 15-df0xxx
HID: logitech-dj: add support for the new lightspeed connection iteration
HID: intel-ish-hid: ipc: Add Tiger Lake H PCI device ID
HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming
...
As usual, a number of additional device drivers that were added
to the kernel are now enabled in the respective configuration
files. A few of the files get updated to match the current
Kconfig files for removed or renamed options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=9G1K
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a number of additional device drivers that were added to the
kernel are now enabled in the respective configuration files.
A few of the files get updated to match the current Kconfig files for
removed or renamed options"
* tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: configs: sama5_defconfig: add QSPI driver
ARM: configs: at91_dt_defconfig: add ov7740 module
ARM: configs: at91_dt_defconfig: add useful helper options
ARM: configs: at91: DT/ATAG defconfig modifications
ARM: configs: sama5_defconfig: update and remove unneeded options
ARM: configs: at91: enable drivers for sam9x60
arm64: defconfig: Enable RT5659
arm64: configs: Support DEVAPC on MediaTek platforms
arm64: configs: Support pwrap on Mediatek MT6779 platform
arm64: defconfig: Enable PF8x00 as builtin
ARM: multi_v7_defconfig: add STM32 CEC support
arm64: defconfig: Enable vibra-pwm
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: Update for moved options
ARM: multi_v7_defconfig: Enable nvmem's rmem driver
arm64: defconfig: Enable nvmem's rmem driver
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
ARM: qcom_defconfig: Enable Command DB driver
ARM: qcom_defconfig: Enable RPMh power domain driver
ARM: qcom_defconfig: Enable ARM PSCI support
...
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmAd1GIQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVktB/9L6zZzqTK7IIPn9XLXVYEP8Am6+nfsK1pZ
YGE5xrOaLhE3t5Kpq202xBDBkBId0poU5o6TW+QZHnSbS2uUEh88RpqE0O/Ozagz
cES+owdGcF+rPaRzghD91ESyumH9ys2rEoy8PFxl6BeHPggGwTRlCeCu2UPaUqbz
pxdoT6ySkc61Waf1K8dMgMl4Up3Tkx2u8kMSxvsru3GoO7K+43nB/6WyTsfD/y2b
q1gZUN2x9/HHFjPH76AFVVJ97DU7KtW3z9X4utn41uxSGspQWJXp/6Y5FbdahMRp
dEvy4AyAMMuzkgQgmlpmGKSpk9ZKPKuRb9n2DKTJWwia94SHEbqx
=0bTQ
-----END PGP SIGNATURE-----
Merge tag 'v5.12-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/defconfig
Enable REGULATOR_MP8859 - the main power supply for one Rockchip board.
* tag 'v5.12-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: Enable REGULATOR_MP8859
Link: https://lore.kernel.org/r/4622596.31r3eYUQgx@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAbowwUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4U5gf+PPpo0Tc8ys0z85tMxh3Yzk7L9jMG
MXIsD4dWjWhZZJV6oWH4HYxuQjqvrYbcprdrdeip/q//S0ch8farB2yft5E2+4el
RhqSig5Y0uySgVg/lJWtDSI4x5E7m0IMJBMydBdV0d/S+lXOXagKNNS4HgB7HWX9
DCPct6Img1RGcAFWw2dAaDZr5WHvrL28bA72SFBaSVh33bXjwoccl+p4rwCdHB24
OTVLHlpiPKo5gO7WxtQnGQuyzDpNstoLPQCfbOyDa0rS+eAA7o/CqaaU2o2Zshw/
hzs/xJiX1sMrRQ0lO7Atl98vYF/oUFlWAeBcIj7TCSz90nLus0NuojUD1g==
=Nud0
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.12:
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable PF8x00 as builtin
arm64: defconfig: Enable vibra-pwm
arm64: defconfig: Enable Broadcom BCM54140 PHY
arm64: defconfig: Enable interconnect for imx8mq
arm64: defconfig: Enable PCA9532 support
arm64: defconfig: Enable rv3028 i2c rtc driver
arm64: defconfig: Enable Librem 5 devkit components
ARM: imx_v6_v7_defconfig: enable power driver of RN5T618 PMIC family
arm64: defconfig: Enable WM8962
Link: https://lore.kernel.org/r/20210204120150.26186-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables HID multitouch and TMPFS Posix ACL, for off-the-shelf
distro support on the Snapdragon laptops. It also enables display
clocks, audio configs and the LT9611UXC HDMI bridge for used on the
SM8250 and specifically RB5 board.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmAbgh4bHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FS8UP/iWVOjpKaQCJRxcbXxRL
8RmaxgeKVuhKjPFJq8whL5trocCbLHWgwiyhG1o1Iqfo74DbmBHfAuWPWleSpkzt
pvnhux2hi/4EC7qpC8cXTrCx1D0dxoFssJ3rKCG82ErYSTnFwKhSXprLECqYchCP
pZvx3zEor6Rw57bJEQ9dnJFveIfSA8P5Bz/D/aMLg6AbrnrdbO1Idu/nPOD2QdiD
okm8qcKZNulauOhKEv4f3QLjWqzbmYYD0jeog/bDs5wJ+02d4EZ5a67JO3iSi2Xg
D14+N1uJtNU9ysO0Eejklr9Xpgc8N/h3O1yUEre5eNrdk1mQYAZq/MCOuj9zGkiS
di0UMcPc2Qy6RBzTvI8mG9cOadYqZxYQyImK8f6knB6CNpz7wIFa7KZd3jCOHZXF
gbA85j5Snt4VlmzNcHol5psF2XFYSiZMr5kd7JgLHWgvB058g+ksYkUYIgDoetBJ
vz9kyo2YCDGaV+DSdfu+x2FTiQUWOxmazX95PW+cjA7bY+eHX8oPYS+1LZYfH1Dn
zoGVIb+MYiP9CevUiPtj2j8yd2XcUMzS6bZ/RiKhgJWLf+VD4WTwtxqrKL+3wnVY
anmvUEyJGSBi9elIdwYVk62zPVqTNXkpT8IVQVUS6TxyQjpgzbfwdhCfwaxFHKm8
5+CKcSIaZUoqkRuA+YNRf63D
=Xdw5
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for 5.12
This enables HID multitouch and TMPFS Posix ACL, for off-the-shelf
distro support on the Snapdragon laptops. It also enables display
clocks, audio configs and the LT9611UXC HDMI bridge for used on the
SM8250 and specifically RB5 board.
* tag 'qcom-arm64-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SM8250 audio config
arm64: defconfig: enable Lontium LT9611UXC bridge driver
arm64: defconfig: enable display clock controller on sm8250
arm64: defconfig: Enable TMPFS Posix ACL
arm64: defconfig: Enable HID multitouch
Link: https://lore.kernel.org/r/20210204051956.388355-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the RT5659 audio codec driver. Jetson AGX Xavier has RT5658 codec
which is compatible with this driver. This enables user to test external
audio.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Bard Liao <bardliao@realtek.com>
- build DEVAPC as a module
-----BEGIN PGP SIGNATURE-----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=gUHF
-----END PGP SIGNATURE-----
Merge tag 'v5.11-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
- build PMIC wrapper as a module
- build DEVAPC as a module
* tag 'v5.11-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: configs: Support DEVAPC on MediaTek platforms
arm64: configs: Support pwrap on Mediatek MT6779 platform
Link: https://lore.kernel.org/r/aa5c6673-f018-00d3-42da-46a4976d8ef7@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver is mandatory for the nitrogen8m mini board
when booting from the sdcard slot.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The haptic motor for the Librem 5 uses this.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Devicetree patches for SDM845 introduced in v5.11 requires the
platform's interconnect driver to be buildin, or the kernel will fail to
provide a valid console when we hit userspace.
-----BEGIN PGP SIGNATURE-----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=DQAs
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 defconfig fixes for v5.11
Devicetree patches for SDM845 introduced in v5.11 requires the
platform's interconnect driver to be buildin, or the kernel will fail to
provide a valid console when we hit userspace.
* tag 'qcom-arm64-defconfig-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Make INTERCONNECT_QCOM_SDM845 builtin
Link: https://lore.kernel.org/r/20210125232412.642834-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit enables Tegra audio graph card driver which is based on
the generic audio-graph card driver. This is intended to be used
on platforms based on Tegra210 and later chips.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the Tegra SoC Thermal driver that is used by Tegra132 and
Tegra210 platforms to be built as a module by default for ARM64 builds.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The i2c-hid driver has been split in two. Let's enable both halves.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Enable support for the QuadPHY on the Kontron K-Box A-230-LS. Enable
the driver as a module.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable lt9611uxc driver for Lontium DSI to HDMI bridge found on Qualcomm
RB5 Robotics platform. Enable this driver to get display working on this
platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201228151827.4019213-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the driver for the display clock controller on Qualcomm SM8250,
needed in order to get the display working. This driver provides
power-domains and as such should not be compiled as a module.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201228151225.4018477-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
available.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable rv3028 i2c rtc driver as module. It is populated on
phyBOARD-Pollux-i.MX8M Plus.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Librem 5 devkit is based on NXP's i.MX8MQ. Schematics are at
https://source.puri.sm/Librem5/dvk-mx8m-bsb.
This enables drivers for the following hardware components that aren't
yet enabled in defconfig:
- Goodix GT5688 touchscreen
- iMX8MQ's PWM for the LCD backlight
- TI BQ25896 charge controller
- NXP SGTL5000 audio codec
- Microcrystal RV-4162-C7 RTC
- magnetometer: CONFIG_IIO_ST_MAGN_3AXIS
- the SIMCom SIM7100E/A modem
- NXP PTN5110HQZ usb-c controller
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
RK3399 boards like ROC-RK3399-PC is using MP8859 DC/DC converter
for 12V supply.
roc-rk3399-pc initially used 12V fixed regulator for this supply,
but the below commit has switched to use MP8859.
commit <1fc61ed04d309b0b8b3562acf701ab988eee12de> "arm64: dts: rockchip:
Enable mp8859 regulator on rk3399-roc-pc"
So, enable by default on the defconfig.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200731160324.142097-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Zynqmp Ultrascale clock controller generates clocks for peripherals
by default. So enable this clock driver for ZynqMP platforms.
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20201209021416.1017790-1-quanyang.wang@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The Beacon EmbeddedWorks development kits supporting i.MX8M Mini
and Nano have an WM8962 audio CODEC installed. Add modules for both
CONFIG_SND_SOC_WM8962 and CONFIG_SND_SOC_FSL_ASOC_CARD to enable them.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As of v5.11-rc1 the QUP nodes of SDM845 has got their interconnect
properties specified, this means that the relevant interconnect provider
needs to be builtin for the UART device to probe and the console to be
registered before userspace needs to access it.
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201222043745.3420447-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already support.
This is also known as the SigmaStar SSD202D, and we add support for
the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the Ampere
Altra based "Fii Kudo" server and the Quanta GSJ, both of which are
added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's
generation, also added along with its reference board. This one is
still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into low-end
tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM,
and one machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board
for the aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape
LX2162A, which is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based board,
- IEI Puzzle-M801, a rackmount network appliance based on
Marvell Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm
sm8250 and sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook
(sc7180)
- New board variants of the Renesas based "Kingfisher" and
"HiHope" reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with
a few carrier boards.
There is one conflict in mt6577_auxadc.txt, which got replaced in
another tree and modified here, the modification is already part of
the new file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=R47r
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
These are the usual defconfig updates, adding support for additional
modules and updating some files according to changes in Kconfig.
I also include the removal of CONFIG_BACKLIGHT_GENERIC across multiple
architectures, after the driver was removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/aeGEACgkQmmx57+YA
GNneCQ//cXRyOz0/L0ihMbMSaIpJPKNfI5oeyLn3/byCH9lb8w9XD+YLgfXbBxtK
zpS/7FxOuc2uJ1/r6REMKNVrVq6K57BtYgDiP3wlPSRdSvWbim1gmbJLIutpUAR/
IhjzguC1QwMld7DqBNMESUcOYeR9F5lUL7eTaKvNuGH7eQdnndUMWCUTwOQhvDv2
igj74tCIENrubOCVYnVaR3TqfeI3Ke5GXSthte0sIOh7fyyckPnqWmCD84Twr6WA
08Z5ptVPLL6KceIDdIEmmIxrSey8GSly+6PBvfgCKJaV9Wb14XyTHDUdOw6D/zrw
R31tSKk2Jd9MnVQBJl4M+Nt3SIJky5ak+W7Sg2Br/lFH23BJ6dIA5vb19YaN40uM
SqnshsxNpFPNqEkJ5/oxEa6PoNmpWpyr4Guxvqi0JEn4G44u9Zy1qb3e8FLsgoW5
qyC8700Z4UvTMGGAEPCvqkDyco9/iectVIitQ0WhJZYYVxIJ1vJNKt4Q8fqYo6yo
bbhjS3HDoITykFsOAanUFDG5pPIW70n8uTQgXOEmsDDAgI7gRpip8GFzZTv4Dlh3
8RMGdNsy2OWNF99RPZ0q7Gis4IGT/dGJ5MfFxwdyuB3N35rBvu0AW+UYH7Mgaamu
4yk1vZEiBOCUdR4kA+YYSbWO82N2v0PDGDhJV7jpmLqS/uKFtt0=
=kCa2
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"These are the usual defconfig updates, adding support for additional
modules and updating some files according to changes in Kconfig.
I also include the removal of CONFIG_BACKLIGHT_GENERIC across multiple
architectures, after the driver was removed"
* tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
powerpc/configs: drop unused BACKLIGHT_GENERIC option
parisc: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: drop unused BACKLIGHT_GENERIC option
ARM: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: Enable more Librem 5 hardware
arm64: defconfig: Enable RTC_DRV_HYM8563
arm64: defconfig: Enable USB_SERIAL_CP210X
arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY
arm64: defconfig: Enable ROCKCHIP_LVDS
arm64: defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: enable STM32 dfsdm audio support
ARM: multi_v7_defconfig: enable STM32 spdifrx support
ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support
ARM: multi_v7_defconfig: add STM32 crypto support
ARM: multi_v7_defconfig: enable counter subsystem and stm32 counter drivers
ARM: multi_v7_defconfig: make Samsung Exynos EHCI driver a module
arm64: defconfig: Enable Qualcomm PON driver
ARM: omap2plus_defconfig: Enable TI eQEP counter driver
ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
...
New drivers:
- New driver for the Microchip Serial GPIO "SGPIO".
- Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.
New subdrivers:
- Intel Lakefield subdriver.
- Intel Elkhart Lake subdriver.
- Intel Alder Lake-S subdriver.
- Qualcomm MSM8953 subdriver.
- Qualcomm SDX55 subdriver.
- Qualcomm SDX55 PMIC subdriver.
- Ocelot Luton SoC subdriver.
- Ocelot Serval SoC subdriver.
Modularization:
- The Meson driver can now be built as modules.
- The Qualcomm driver(s) can now be built as modules.
Incremental improvements:
- The Intel driver now supports pin configuration for GPIO-related
configurations.
- A bunch of Renesas PFC drivers have been augmented with support
for QSPI pins, groups and functions.
- Non-critical fixes to the irq handling in the Allwinner Sunxi
driver.
-----BEGIN PGP SIGNATURE-----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=e5sV
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.11 kernel.
Drivers, drivers and drivers. Not a single core change.
Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot
SoCs.
As part of the modularization attempt, I applied one patch affecting
the firmware subsystem as a functional (not syntactic/semantic)
dependency and then it blew up in our face, so I had to revert it,
bummer. It will come in later, through that subsystem, I guess.
New drivers:
- New driver for the Microchip Serial GPIO "SGPIO".
- Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.
New subdrivers:
- Intel Lakefield subdriver.
- Intel Elkhart Lake subdriver.
- Intel Alder Lake-S subdriver.
- Qualcomm MSM8953 subdriver.
- Qualcomm SDX55 subdriver.
- Qualcomm SDX55 PMIC subdriver.
- Ocelot Luton SoC subdriver.
- Ocelot Serval SoC subdriver.
Modularization:
- The Meson driver can now be built as modules.
- The Qualcomm driver(s) can now be built as modules.
Incremental improvements:
- The Intel driver now supports pin configuration for GPIO-related
configurations.
- A bunch of Renesas PFC drivers have been augmented with support for
QSPI pins, groups and functions.
- Non-critical fixes to the irq handling in the Allwinner Sunxi
driver"
* tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl/spear: simplify the return expression of spear300_pinctrl_probe()
pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1()
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support
pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)
pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
pinctrl: qcom-pmic-gpio: Add support for pmx55
dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword
pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error
pinctrl: mtk: Fix low level output voltage issue
pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
pinctrl: actions: pinctrl-s500: Constify s500_padinfo[]
pinctrl: pinctrl-microchip-sgpio: Add OF config dependency
pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver
pinctrl: at91-pio4: add support for fewer lines on last PIO bank
pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler
pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON
pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller
...
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
for 5.11, please pull the following:
- Rafal adds initial support for the Broadcom 4908 which are SoCs used
in home routers and are based on the DSL architecture and using
Broadcom Brahma-B53 CPUs.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl/Ce8YACgkQh9CWnEQH
BwQnhw/9GQHgXy+ZSI5a8mak8eUzK/dwrtdMvtCuERLK6sMvTBJSmuejYoWwzF27
e+t0rm40Ly2JhxfBdrx6Y/uWxAvXUgFE5Wd//ukY8+G9rHDDvY2KtYxb9V0wjM7L
4ye0ghYtK1snZRWa5DBNyn4b8UPOCETGqysOQ3hUlSzIL4zzY2OjAXarKAfv4lHJ
Qj5zRYj0I+KMHBNLa0nryz2fLy3HGVevAMapJ6Sm/sL4feLTX7FkhT9GLpTQXGk6
9ou3g5ywOZ2P8ic1wldxuPCMGsTYu53MVpRmnuDec68PzGYTfYrd3zyDcTQEh8am
UtGV/Wo7HwTdGR1KDUEgIbEbf5bSm+vaohEwc/XLziQMf9cCJ+cIushaWb2r/IY4
EDWD9nYN9z+kJe+05wtWZ4JeXQjL0lajVSpTTSn4oAVcoEl7ixLepqY2uDRl7jFl
iJhyzvuJOinxJ8Ggs6S0eYgAVrIEZNUrsT6J9MrumXrcAJQPoBMppEPdWeIPkWMn
hlfWDn7MyWil1+PeCnB9VCgtTq1XlAHzcXXHzdZqJhdHQwi200NmJioEC/M2dJ2Q
EG/jAmytRJ5N9KFwqTnuVwn581FUdgxDxmTyXw2pr6hafqOou4APqDwmJw8QcBcf
QLsIJ+3iPyPT52P4zymTKEN22YD768JrRWa1pItAGObzGitlUBE=
=oz5b
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.11, please pull the following:
- Rafal adds initial support for the Broadcom 4908 which are SoCs used
in home routers and are based on the DSL architecture and using
Broadcom Brahma-B53 CPUs.
* tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: add config for Broadcom BCM4908 SoCs
arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files
dt-bindings: arm: bcm: document BCM4908 bindings
Link: https://lore.kernel.org/r/20201128163410.1691529-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 7ecdea4a02 ("backlight: generic_bl: Remove this driver as it is
unused") removed geenric_bl driver from the tree, together with
corresponding config option.
Remove BACKLIGHT_GENERIC config item from arm64 configuration.
Fixes: 7ecdea4a02 ("backlight: generic_bl: Remove this driver as it is unused")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20201201222922.3183-3-andrey.zhizhikin@leica-geosystems.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of patches that enable various i.MX audio drivers for i.MX8M.
- Enable more drivers that are useful on Librem 5 hardware.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl/HokMUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6oCggAs8waHnriWnEi6pBv/vuX1GFNPsoj
EmPk505RL6akL+QiGwFl9L4/k+khuZRgUbUfgsrx1qTcpu3XyKrIfABmez1vJIXT
staufuHoOsgjJUzP+aeuyoc/PVhq1EtV/xPAjQrhIHnET5NxIJPiOg+caHnLyD71
Z9hJYy72o1S4p+FMVjB5icc9P/yZh7fZNBj3eH7x8YF0jRnePoDomykIPua+xt19
Qtz1mSg9YZF1NXXrY+TX5BP7J0byeCgicFRrV9VLIMnv2qq3oKKwqpTFjw52G4IL
dinAlOtKhuVmMprveDXVUHyzpifTaCOF7vjwA9By8sJCkJTKgz9x02KcjQ==
=LJQK
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.11:
- A couple of patches that enable various i.MX audio drivers for i.MX8M.
- Enable more drivers that are useful on Librem 5 hardware.
* tag 'imx-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable more Librem 5 hardware
arm64: defconfig: Enable ASRC and EASRC
arm64: defconfig: Enable additional sound drivers on i.MX8M Mini
Link: https://lore.kernel.org/r/20201202142717.9262-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the Qualcomm PON and OSM L3 drivers. It then ensures that
the QCOM_SCM and Command DB drivers are built-in, now that they have
been made user selectable and tristate.
-----BEGIN PGP SIGNATURE-----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=slxb
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm defconfig updates for 5.11
This enables the Qualcomm PON and OSM L3 drivers. It then ensures that
the QCOM_SCM and Command DB drivers are built-in, now that they have
been made user selectable and tristate.
* tag 'qcom-arm64-defconfig-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm PON driver
arm64: defconfig: Enable QCOM_SCM as builtin
arm64: defconfig: Enable Qualcomm OSM L3 driver
arm64: defconfig: Enable Qualcomm Command DB driver
Link: https://lore.kernel.org/r/20201130190124.345127-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- GPIO and I2C for J721E SD card support to be functional
-----BEGIN PGP SIGNATURE-----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=+rdo
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-config-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/defconfig
ARM64 defconfig changes for TI K3 platforms for v5.11 merge window:
- GPIO and I2C for J721E SD card support to be functional
* tag 'ti-k3-config-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux:
arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
Link: https://lore.kernel.org/r/20201130174850.ni4sdyz3qp67j3sz@upstart
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
the following:
- Florian enables the ARM SCMI protocol, and the common clock, HWMON and
CPU frequency scaling drivers since those are used by ARCH_BRCMSTB
platforms
-----BEGIN PGP SIGNATURE-----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=8JN3
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.11/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains ARM64 defconfig changes for 5.11, please pull
the following:
- Florian enables the ARM SCMI protocol, and the common clock, HWMON and
CPU frequency scaling drivers since those are used by ARCH_BRCMSTB
platforms
* tag 'arm-soc/for-5.11/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable ARM SCMI protocol and drivers
Link: https://lore.kernel.org/r/20201128163410.1691529-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX8IzNQAKCRDj7w1vZxhR
xRGVAQCz65FoHboWxCwXPuduSZ6sCkyRjdSzw84U7qJzrWHgVgD+MR93mv7aYM4A
x+S/Pa1sxH3awHUw8JDmT51Qt0JijgU=
=rDZm
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
One patch to enable the Allwinner I2S controller on arm64's defconfig
* tag 'sunxi-config64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable Allwinner i2s driver
Link: https://lore.kernel.org/r/5ddf5486-a20c-467a-bc67-d5e8fbc38856.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some hardware platforms required CP20x USB to Serial converter
in order to work onboard functionalities like Bluetooth.
An example of such a platform is from Engicam's PX30 (ARM64).
Mark it as module in defconfig.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-10-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In order to work LDVS, DSI in mainline tree for Rockchip based
hardware platforms, the associated PHY driver has to enable
in default defconfig.
Enable rockchip DSI phy driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-9-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Now, some of the rockchip hardware platforms do enable
lvds in mainline tree.
So, enable Rockchip LVDS driver via default defconfig.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-8-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the ARM SCMI protocol and the common clock, cpufreq, reset and
sensors drivers. Broadcom STB platforms (ARCH_BRCMSTB) implement SCMI to
provide support for CPU frequency scaling, clock configuration and
temperature and current sensors.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
The Tegra234 VDK support that was introduced in v5.10-rc1 is now enabled
by default.
-----BEGIN PGP SIGNATURE-----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=KgUW
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.11-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration changes for v5.11-rc1
The Tegra234 VDK support that was introduced in v5.10-rc1 is now enabled
by default.
* tag 'tegra-for-5.11-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable Tegra234 support
Link: https://lore.kernel.org/r/20201127144329.124891-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add ARCH_BCM4908 config that can be used for compiling DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The PON block in the PMIC provides, among other things, support for
"reboot reason", power key and reset "key" handling. Let's enable the
driver for this block.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201125023831.99774-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
- Enable support for the new R-Car V3U SoC in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.10-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX66RqgAKCRCKwlD9ZEnx
cLC5AP493HI4gYGzpdkwikaOR6sMM5iwI0v3n1AYcuw79Ep11gEAyEg0DpLMAOG8
aHDYqSv6Zo10pYjbHBJRwYRrOJMarw4=
=eio1
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.11
- Enable support for the new R-Car V3U SoC in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.10-rc1.
* tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A779A0 SoC
ARM: shmobile: defconfig: Refresh for v5.10-rc1
Link: https://lore.kernel.org/r/20201113150854.3923885-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm SCM driver was never explicitly enabled in the defconfig.
Instead it was (apparently) selected by DRM_MSM and by the recent change
to make it tristate now became =m.
Unfortunately this removes the ability for PINCTRL_MSM and ARM_SMMU to
be =y and with deferred_probe_timeout defaulting to 0 this means that
things such as UART, USB, PCIe and SDHCI probes with their dependencies
ignored.
The lack of pinctrl results in invalid pin configuration and the lack of
iommu results in the system locking up as soon as any form of data
transfer is attempted from any of the affected peripherals.
Mark QCOM_SCM as builtin, to avoid this.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201118162528.454729-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The OSM L3 interconnect driver is used for scaling the bus to the L3
cache on modern Qualcomm platforms, enable it.
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201113163444.3138807-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add configs to enable regulators that supply power to the SD card
on TI's J721e platform. These regulators are controlled by either
SoC gpios or gpios over i2c expander.
Changes to vmlinux size:
Before:
text data bss dec hex filename
20219067 10875634 523924 31618625 1e27641 vmlinux
After:
text data bss dec hex filename
20228755 10880422 524628 31633805 1e2b18d vmlinux
delta: 15180 (dec)
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20201103190821.30937-1-faiz_abbas@ti.com
This patch reworks PINCTRL_MSM to be a visible option, and
instead of having the various SoC specific drivers select
PINCTRL_MSM, this switches those configs to depend on
PINCTRL_MSM.
This is useful, as it will be needed in order to cleanly support
having the qcom-scm driver, which pinctrl-msm calls into,
configured as a module. Without this change, we would eventually
have to add dependency lines to every config that selects
PINCTRL_MSM, and that would becomes a maintenance headache.
We also add PINCTRL_MSM to the arm64 defconfig to avoid
surprises as otherwise PINCTRL_MSM/IPQ* options previously
enabled, will be off.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20201106042710.55979-1-john.stultz@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Qualcomm Command DB driver seems to have been indirectly enabled by
the Qualcomm DRM driver and up until the introduction of '778279f4f5e4
("soc: qcom: cmd-db: allow loading as a module")' this resulted in the
driver "always" being builtin on arm64. But with the introduction of
said change it, and all other RPMH related drivers, becomes =m.
The immediate result is that the uart driver fails to probe, which
depending on userspace's dependency on the presence of /dev/console
might be fatal. For systems getting past this the default timeout of 0
seconds for probe deferral of many subsystems causes the system to be
completely useless.
So, make Command DB builtin.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201103010850.757500-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The i.MX8M Nano supports the EASRC driver, and it requires ASRC.
Enable both of them as modules.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M Mini has micfil and SPDIF support but the drivers
are not being loaded.
This patch updates the defconfig to add support for these drivers.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX SoC GPIO driver provides the basic functions of GPIO pin operations
and IRQ operations, it is now changed from "def_bool y" to "tristate", so
it should be explicitly enabled to make sure all consumers work normally.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=T9BC
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits)
ARM: multi_v7_defconfig: add FMC2 EBI controller support
arm64: defconfig: enable Qualcomm ASoC modules
arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50
arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable Qcom SNPS Femto PHY
ARM: configs: Update Realview defconfig
ARM: configs: Update Versatile defconfig
ARM: config: aspeed_g5: Enable IBM OP Panel driver
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of media drivers
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
ARM: omap2plus_defconfig: enable generic net options
ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: defconfig: Build AHUB component drivers
arm64: defconfig: Enable Lontium LT9611 driver
arm64: defcondfig: Enable USB ACM and FTDI drivers
...
Enable Qualcomm related drivers for Lontium LT9611 HDMI bridge, SNPS
high-speed USB PHY, various Interconnect providers, GPU clock
controllers for SM8150 and SM8250 and audio driver for MSM8996 and
APQ8016.
Then enable ACM and FTDI host drivers, which are useful when working
with various development boards using ARM64 hosts.
-----BEGIN PGP SIGNATURE-----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=4h5/
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64defconfig updates for v5.10
Enable Qualcomm related drivers for Lontium LT9611 HDMI bridge, SNPS
high-speed USB PHY, various Interconnect providers, GPU clock
controllers for SM8150 and SM8250 and audio driver for MSM8996 and
APQ8016.
Then enable ACM and FTDI host drivers, which are useful when working
with various development boards using ARM64 hosts.
* tag 'qcom-arm64-defconfig-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm ASoC modules
arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50
arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
arm64: defconfig: Enable Qcom SNPS Femto PHY
arm64: defconfig: Enable Lontium LT9611 driver
arm64: defcondfig: Enable USB ACM and FTDI drivers
Link: https://lore.kernel.org/r/20200924040708.180352-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in
multi_v7_defconfig.
- Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to
support MIPI DSI on imx8mq-evk.
- Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver
in arm64 defconfig to support display on imx8mq-librem5-devkit.
- Enable sl28cpld board management controller driver support in arm64
defconfig.
- Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in
AArch32 mode.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl9q9hYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5O3Af/cYifoTK2/oL+IC9tirmHj+1h4Yqa
F+owysiOlMoqdxhHRYlhiowE5euTEMAQFjKyUxSLoBUnemP0W/t556zcyCvCJgFL
R1ZUm8clACxXYJVlasT7qRhR/T0hVz2BMgIAjWtoY8hTXfxyVr+WurdxLbdUn8cC
6p28DV26xdZeRH/Jrk/4frSWxjCYPNcVmstP8eHcPOOBw7SdrfquOrjMsaZsiAfF
4CzdjhfCBDH0XznTQ5KY9J+Z8Da8fcikM1+VvVb64WlZI9WPHYYmQQclpJomnOHG
L5dJiLFTjQcWXt/TkYaZozyiW8pG8g7gawpom5JJ1SbW3GR7OFP+RTv8RQ==
=qHiE
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.10:
- Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in
multi_v7_defconfig.
- Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to
support MIPI DSI on imx8mq-evk.
- Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver
in arm64 defconfig to support display on imx8mq-librem5-devkit.
- Enable sl28cpld board management controller driver support in arm64
defconfig.
- Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in
AArch32 mode.
* tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable imx8mq-librem5-devkit display stack
arm64: defconfig: re-sync DRM related defconfig bits
ARM: imx_v6_v7_defconfig: Support i.MX8MN/P/Q
ARM: multi_v7_defconfig: Enable i.MX7ULP SoC
ARM: multi_v7_defconfig: Enable i.MX6SLL SoC
ARM: multi_v7_defconfig: enable caam crypto module
Link: https://lore.kernel.org/r/20200923073009.23678-6-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
-----BEGIN PGP SIGNATURE-----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=oMmC
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.10
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
* tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
ARM: exynos_defconfig: enable platform media drivers
Link: https://lore.kernel.org/r/20200920160705.9651-2-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This pair of patches enable the ADMA, ACONNECT and AHUB drivers that
are required for audio support on Tegra210 and later.
-----BEGIN PGP SIGNATURE-----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=bB+p
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.10-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration updates for v5.10-rc1
This pair of patches enable the ADMA, ACONNECT and AHUB drivers that
are required for audio support on Tegra210 and later.
* tag 'tegra-for-5.10-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: defconfig: Build AHUB component drivers
Link: https://lore.kernel.org/r/20200918150303.3938852-6-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable CONFIG_INTERCONNECT and interconnect drivers for several Qualcomm
chipsets to enable bus bandwidth control on these SoCs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200917203913.3250205-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable support for the Toshiba Visconti SoCs.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Enable the kernel modules for the board management controller "sl28cpld"
which is used on the SMARC-sAL28 board.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select the eLCDIF display controller and Raydium RM67191 panel drivers,
so that MIPI DSI can be functional by default on a imx8mq-evk board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ROHM BD718x7 PMIC is present on many designs with i.MX 8M SoCs.
Enable the bd718x7 clock driver which provides PMICs 32 kHz clock.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This commit builds ADMA and ACONNECT drivers which can be used on
Tegra210 and later platforms to transfer audio data to/from AHUB
(Audio Hub).
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch helps to build AHUB and its client drivers (I2S, DMIC,
DSPK, ADMAIF and AHUB). These register components with ASoC core.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Lontium LT9611 HDMI bridge can be found in Dragon Board RB3 for
converting DSI to HDMI. Enable this driver to get display working on RB3
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727080118.1934079-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable USB serial drivers to provide UART access to various development
boards from an ARM64 host.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200703185354.1814337-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This moves the CONFIG_DRM_SIMPLE_BRIDGE entry around making further
updates simpler.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the extcon driver for NXP PTN5150A chips (CC logic for USB Type-C
applications) present on some of i.MX8 evaluation boards (e.g. Variscite
Symphony board).
Link: https://lore.kernel.org/r/20200817065654.4419-2-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
USB OTG connections are pretty common for embedded and development
boards, for example to have networking or serial access to the device.
Build as a module the USB gadget configfs options so the defconfig can
be used in such development configurations.
Link: https://lore.kernel.org/r/20200817065654.4419-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
