The Qualcomm QCS404 platform uses the PCIe Gen2 PHY, enable the driver
for this to ensure that PCIe is functional.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20220217040205.1898644-1-bjorn.andersson@linaro.org
Enable the building of the sm8250 video clock controller by default.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220131202721.2122605-2-dmitry.baryshkov@linaro.org
Enable coincell, fastrpc, mailbox and adc-tm5 drivers to be built as
modules. These driver are used on many of Qualcomm platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220131165056.2117434-1-dmitry.baryshkov@linaro.org
CONFIG_SM_DISPCC_8250 is not enabled by default, but it is still
necessary for the Qualcomm RB5 board. Reenable it (as it was enabled
before the commit dde8cd786e ("arm64: defconfig: rebuild default
configuration")).
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Fixes: dde8cd786e ("arm64: defconfig: rebuild default configuration")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220404215913.1497172-1-dmitry.baryshkov@linaro.org
Enable CONFIG_SND_SOC_WCD9335 to built as module. This enable audio
codec used on the Qualcomm Dragonboard820c device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220403211329.1410725-1-dmitry.baryshkov@linaro.org
After a somewhat quiet 5.17 release, the size of the DT changes
is a bit larger again. There are nine new SoC that get added,
all of them related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the
LG Nexus 5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs,
along with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC losely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added all
over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91, Allwinner,
i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)
-----BEGIN PGP SIGNATURE-----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=v98T
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
Enable the driver for the Layerscape SFP (Security Fuse Processor) found
on most Layerscape SoCs. For example, a per-device unique serial number
is stored in the fuses.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Build the CVP driver in the standard arm64 defconfig.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
- Enable the new Audio Graph Card2 driver which can handle sound cards
more flexibly in the arm64 defconfig,
- Disable unneeded 8250 serial options in shmobile_defconfig,
- Enable additional support for Renesas platforms in the arm64
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYgZfpgAKCRCKwlD9ZEnx
cM5XAP4nyb1rxKQpDWbdozSOmItkytpfC2+NTS9+Ul0mAVz98QD/YfuW1awSR8EE
6iyGVM2WqFbaKKGNEqogHI2eNGvbyAk=
=HkeI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=G8H0
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.18
- Enable the new Audio Graph Card2 driver which can handle sound cards
more flexibly in the arm64 defconfig,
- Disable unneeded 8250 serial options in shmobile_defconfig,
- Enable additional support for Renesas platforms in the arm64
defconfig.
* tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Disable unneeded 8250 serial options
arm64: defconfig: Enable Audio Graph Card2 driver
Link: https://lore.kernel.org/r/cover.1644587198.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add a new defconfig for Cortex-M based i.MXRT family.
- A series from Marcel Ziswiler to rebuild arm64 defconfig with
'savedefconfig', and then enable various relevant options needed by
Toradex verdin-imx8mm device.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmIUkysUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7+rwgAh6O4IeWd9PFgNsocVV5gjJUSr3HE
N6kODKwbd6xbVt+JA6kAUfhqaDAOO5daicnB+BIjTxnttflZXxpER10G5HBZL1qH
ACglN1NQPzz38RzfeJd/PaNqixMFsOdn4RsHbwQicX8aHUBP7MpfFh0FT50/fpgo
nYeW5itpyvcSHzTrmgXNveriVz7/UiE5i/0FSvwEjjraD2hWVFI3nZgHFtzQcVhe
KLD8Q8f1bH40wEAH4KAlWY0m5VD5jmnAkeRMlvYzWnKaG1sl2gsZlGb1w1zOrC41
lD+mU/SvcNoe4Bupn3J6BjA1MISfaKClYWbJ0iOVj3S6RUQKC8ToUxHVJA==
=ozsC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIZAdMACgkQmmx57+YA
GNkfIRAAuxlkBlz8iIL2dh0Y7BB3NaKhwkWJxw9h5vT0/UE8QmGOFytvyA1VUcHM
KkF33OI6ua/ge6uWh3n/ehIx2qMsi47bMCt29PBa06UEBii4h/B8/mL+A368H/Pt
cpUDndCLiSRoA+FAlrWgykBh1xAKAaUeZR43IMJpzwR5IaW2wW2anDZ+JRRb1bFO
E3keZOIGey6HwSwsjZILJ5yg9RoUcPunXsmxobfAQfDu+I4BZiE3f2H1gYMp9+Jk
hTtxBeBUXR3T6MERT4RLNNr85NC9vMtxPDMSWE6JqV/TKF/+TvWZPyRmY/J0JJlM
mh1RAsWvglpO4rRu08SN8AsUdl63CTMmie+5VFnzOBx7bJiPxlGlEA2ib/YstMtP
ETRqXsg/Mghce+Xo8JMKhszsQU/V8jWBFWRrjyZEiVOt44BuOH4kfqkjBQ/fuGH6
Wq+G/diIcKH675elakze17GGoS6pOqK3Po83G18W48DzNee8m8WYiCWVN7qQNWe5
3DZnW1E1SILZAZMQNsDqWN9VBXr6OiDA/mz4ypiCQo/sIGBYVjXX77XTo7L9h6S2
zLm6OGwVjNQqsFG5KXbfxZGOXGXJpJjhsDBfRRAYbpqNKbrANv/Fs07khpQXQMBc
b7a3JZMijOIqSOZ9aIjeSocuQ5IUtuSec2L2e0oqYf5WA0r2euc=
=Ce1L
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.18:
- Add a new defconfig for Cortex-M based i.MXRT family.
- A series from Marcel Ziswiler to rebuild arm64 defconfig with
'savedefconfig', and then enable various relevant options needed by
Toradex verdin-imx8mm device.
* tag 'imx-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable verdin-imx8mm relevant drivers as modules
arm64: defconfig: build r8169 as a module
arm64: defconfig: build imx-sdma as a module
arm64: defconfig: enable imx8m pcie phy driver
arm64: defconfig: enable bpf/cgroup firewalling
arm64: defconfig: rebuild default configuration
arm64: defconfig: re-order default configuration
arm64: defconfig: enable pcieaer configuration
arm64: defconfig: enable taskstats configuration
ARM: imxrt_defconfig: Add i.MXRT family defconfig
Link: https://lore.kernel.org/r/20220222075226.160187-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable drivers for USB and SERDES IPs on TI K3 SoC
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmHEEI0QHHZpZ25lc2hy
QHRpLmNvbQAKCRDERh5FfJEW4+qvB/9bn7oXiHF0tdkgeFu1naq0gIBXbcbH6xxU
O9EAbRlVn3NC6XApDx/KuKaIHtogjV4n+PkLaStLcyBd3SYEB2k/VvnKI0IFlhPG
L8u+t6O5/pNUK9MZzT6+VsY67CAOHjdy/kU83UboD4EsgXn2NS0EosGTQFs/RCVt
0LQONv5+6Tu8UaBg0tt3r6Q6THMcSsLzqCVfMZgehhCOJmk1yQ/7VeiFZtJr0RX5
M1G+IWYhgaWNpzO3AAxkM3iWXo3xL7vDi8eNhMX1nSLygfkQ4TSyoYHxo32VfoWH
U9js6HwDj7+KaPDfvGlkGW/4vjGgPiFN/iJXTGEeFZdap41jc9aN
=L/gY
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OX1P
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-config-for-v5.17-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/defconfig
ARM64 defconfig changes for TI K3 platforms for v5.17 merge window:
- Enable drivers for USB and SERDES IPs on TI K3 SoC
* tag 'ti-k3-config-for-v5.17-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable USB controller drivers for TI K3 SoC
Link: https://lore.kernel.org/r/20211223094040.15349-1-vigneshr@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable various drivers which support peripherals as found on the
Verdin iMX8M Mini et al. computer/system on modules:
- CONFIG_CAN_MCP251XFD
At least one Microchip MCP2518FDT SPI CAN controller which this driver
also supports may be found on the Verdin iMX8M Mini computer/system on
module.
- CONFIG_BT_HCIUART_MRVL, CONFIG_BT_MRVL, CONFIG_BT_MRVL_SDIO and
CONFIG_MWIFIEX_SDIO
The AzureWave AW-CM276NF which these Bluetooth and Wi-Fi drivers also
support may be found on the Verdin iMX8M Mini (as well as the Apalis
iMX8, Colibri iMX8X and Verdin iMX8M Plus for that matter) computer/
system on module.
- CONFIG_SENSORS_LM75
The TI TMP75C temperature sensor which this driver also supports may be
found on the Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for
that matter) computer/system on module.
- CONFIG_SND_SOC_NAU8822
The Nuvoton Technology Corporation (NTC) NAU88C22YG which this driver
also supports may be found on the Verdin Development Board a carrier
board for the Verdin family of computer/system on module which the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
may be mated in.
- CONFIG_TI_ADS1015
The TLA2024 ADC which this driver also supports may be found on the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
computer/system on module.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Build Realtek Gigabit Ethernet driver as a module.
Network cards based on chipsets this driver supports are ubiquitous both
in regular PCIe as well as mini-PCIe and nowadays even various M.2
formats. It is therefore a suitable card to be used for any kind of PCIe
and/or Gigabit Ethernet testing. As it is not designed in, just enabling
it as a module seems most suitable.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This avoids the following systemd warning:
[ 2.618538] systemd[1]: system-getty.slice: unit configures an IP
firewall, but the local system does not support BPF/cgroup firewalling.
[ 2.630916] systemd[1]: (This warning is only shown for the first
unit using IP firewalling.)
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Run "make defconfig; make savedefconfig" to rebuild defconfig.
This dropped the following configuration options which are nowaday's
already enabled (resp. disabled) by default:
CONFIG_MEMCG_SWAP=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_FSL_MC_BUS=y
CONFIG_QCOM_SCM=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_XHCI_PCI=m
CONFIG_SDM_GCC_845=y
CONFIG_SM_DISPCC_8250=y
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
CONFIG_COMMON_CLK_ZYNQMP=y
CONFIG_POWER_AVS was renamed to POWER_AVS_OMAP in commit bca815d620
("PM: AVS: smartreflex Move driver to soc specific drivers"). As there
are no 64-bit Arm OMAPs it getting dropped seems fair.
Note that the following user-selectable configuration options have been
preserved:
CONFIG_SECCOMP=y
CONFIG_SLIMBUS=m
CONFIG_INTERCONNECT=y
CONFIG_CONFIGFS_FS=y
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_PCIEAER which is required for CONFIG_ACPI_APEI_PCIEAER.
Commit 8c8ff55b4d ("PCI/AER: Don't select CONFIG_PCIEAER by default")
changed it to no longer being enabled by default.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_TASKSTATS which is required for CONFIG_TASK_XACCT (and
subsequently CONFIG_TASK_IO_ACCOUNTING). Previously, taskstats got
pulled in by KVM but that got changed in commit 63b3f96e1a
("kvm: Select SCHED_INFO instead of TASK_DELAY_ACCT").
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Renesas RSPI, RZ/G2L thermal, RZ/G2L WDT watchdog, and OSTM timer,
as used on the RZ/G2L SMARC EVK board,
- R-Car Image Signal Processor (ISP) and Display Unit embedded MIPI
DSI encoder on R-Car V3U, as used on the Falcon board.
All of the above are modular, except for thermal, watchdog, and timer.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c9800d67f91a90d418a3ce44c59109ae0a87b2d8.1643373223.git.geert+renesas@glider.be
Enable the following drivers as modular:
- NAND controller with CONFIG_MTD_NAND_BRCMNAND
- AHCI/SATA controller driver with CONFIG_AHCI_BRCM
- Starfighter 2 Ethernet switch driver with CONFIG_NET_DSA_BCM_SF2
- USB drivers (OHCI, EHCI, XHCI) with CONFIG_USB_BRCMSTB
- Watchdog with CONFIG_BCM7038_WDT
- PWM with CONFIG_PWM_BRCMSTB
- SYSTEMPORT Ethernet controller with CONFIG_SYSTEMPORT
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The MediaTek CPUFreq driver provides control of CPU frequency/voltage
on MediaTek SoCs. Since there's no device-tree node to bind it to, the
driver needs to be enabled built-in. Enable it so.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20211217154452.868419-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The MT6397 RTC is part of the Mediatek MT6397 PMIC, which is present in
the mt8173-elm base board.
The driver for the PMIC is already enabled through CONFIG_MFD_MT6397, so
enable just the driver for the RTC.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20211217162445.876034-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable Cadence USB, TI USB and required SERDES drivers to support USB on
TI K3 SoCs.
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/r/20211221152140.15151-1-vigneshr@ti.com
Add the SM8450 GCC config as built-in so that platform can boot to shell
with defconfig
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211216065444.650357-2-vkoul@kernel.org
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9iKYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6Giwf+OjKD1fwYzsSRFVyY5m+Vn1iZANCi
sXb5mVQks435oeBV44O5AEsaTLb+qQEyFQZBL6IdbIlPm+LwHu2GYTn2F84bilww
vO7mVbIpeh7bInD3eELWdrE6BdhcsenlLi3Tg0oeMQ7HAk4FT7GzcWk2laVemOnU
RoWjTn0S97Bh4aWfGEg22c+wfh1Egp6rLmHxaXCUJDrCexyA4CLZ6+r/ZgFUlb2q
FbdmPyjPnasiyM1RsY+hWY6dELl8xJwNg8hCA1DBddDsDLj8gMYXvZmR3oYHOG/1
/6Z4y6gbJ7NK9h4xPvjJ/XCdlXaEpZAIwr3OB+aEpCIXHNTaTzQL3v240A==
=BPLr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rJsW
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.17:
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
* tag 'imx-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2
arm64: defconfig: enable drivers for booting i.MX8ULP
arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx
arm64: defconfig: Enable OV5640
arm64: defconfig: Enable VIDEO_IMX_MEDIA
Link: https://lore.kernel.org/r/20211218071427.26745-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the device tree in place, enable missing drivers as modules, if
possible. PHY driver needs built-in for interrupt support.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Beacon EmbeddedWorks imx8mm development kit has a TD Next 5640
Camera. Enable the OV5640 driver to use the camera.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To use a camera, the CSIS and CSI drivers need to be enabled with
VIDEO_IMX_MEDIA.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The major change here is the disabling of the firmware loades user space
fallback, this is done as arm64 is the only platform with this flag
enabled and as a result doesn't play nice with standard distributions.
It then enables the new limits driver, which controls the hardware based
thermal mitigation on a range of Qualcomm platforms. The prima/pronto
WiFi and Bluetooth drivers are enabled to ensure these features works
out of the box, now that the last details in the dts are landed.
The new driver for acquiring sleep stats is enabled to facilitate the
various efforts on getting these platforms into low power mode.
Lastly the base SC7280 drivers needed to simply boot this platform are
enabled.
-----BEGIN PGP SIGNATURE-----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=xuCz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DfL5
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfigs
Qualcomm ARM64 defconfig updates for v5.16
The major change here is the disabling of the firmware loades user space
fallback, this is done as arm64 is the only platform with this flag
enabled and as a result doesn't play nice with standard distributions.
It then enables the new limits driver, which controls the hardware based
thermal mitigation on a range of Qualcomm platforms. The prima/pronto
WiFi and Bluetooth drivers are enabled to ensure these features works
out of the box, now that the last details in the dts are landed.
The new driver for acquiring sleep stats is enabled to facilitate the
various efforts on getting these platforms into low power mode.
Lastly the base SC7280 drivers needed to simply boot this platform are
enabled.
* tag 'qcom-arm64-defconfig-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm LMH driver
arm64: defconfig: Enable Qualcomm prima/pronto drivers
arm64: defconfig: Enable Sleep stats driver
arm64: defconfig: Enable QTI SC7280 pinctrl, gcc and interconnect
arm64: defconfig: Disable firmware sysfs fallback
Link: https://lore.kernel.org/r/20211026134953.1204327-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the introduction of LMH in '36c6581214c4 ("arm64: dts: qcom:
sdm845: Add support for LMh node")' the CPUfreq gained a reference for
the two interrupts from the LMh. This means that if the LMh driver isn't
enabled CPUfreq will not probe and there's no frequency scaling.
Enable LMh to make CPUfreq functional again on SDM845.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Reviewed-and-Tested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20211017204036.2761122-1-bjorn.andersson@linaro.org
The Qualcomm prima/pronto drivers consists of a remoteproc driver boot
the combined WiFi and Bluetooth firmware on the related co-processor, a
control driver to load calibration and settings firmware, the wcn36xx
WiFi driver and the SMD based Bluetooth driver.
Enable these in the defconfig to provide Bluetooth and WiFi on devices
such as the Qualcomm Dragonboard 410c.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211008192840.3593362-1-bjorn.andersson@linaro.org
Enable the QTI SC7280 pinctrl, gcc and interconnect drivers required
for kernel to boot to console.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007052812.3717-1-quic_saipraka@quicinc.com
Part of the enablement of SDMA on the IMX platforms, '7f4e4afa140c
("arm64: defconfig: Enable SDMA on i.mx8mq/8mm")' also enabled
CONFIG_FW_LOADER_USER_HELPER_FALLBACK, to allow "firmware loaded by
udev".
Unfortunately having the fallback enabled does, due to the 60 second
timeout, essentially requiring userspace to provide a firmware loader.
But systemd dropped the support for this interface back in 2014 and
because arm64 is the only architecture that has this enabled, there
doesn't seem to be any standard solution available.
Examples of this problem can be found in e.g. the ath10k driver, which
with a standard distro can take about 10 minutes before wlan0 appears.
The alternative to this patch would be to change these drivers to use
firmware_request_direct(), to avoid the sysfs fallback. But that would
prevent other systems, such as Android, to rely on a userspace firmware
loader to pick the firmware from a non-standard place, with just a
custom defconfig.
This patch therefor attempts to align the arm64 defconfig will all other
architectures in the upstream kernel.
Cc: Robin Gong <yibin.gong@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210930215300.60290-1-bjorn.andersson@linaro.org
This enables drivers for the various audio processors found on Tegra210
and later.
-----BEGIN PGP SIGNATURE-----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=v2qB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7sxf
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfigs
arm64: tegra: Default configuration changes for v5.16-rc1
This enables drivers for the various audio processors found on Tegra210
and later.
* tag 'tegra-for-5.16-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable few Tegra210 based AHUB drivers
Link: https://lore.kernel.org/r/20211008201132.1678814-8-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable configs for following modules:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
These configs are used on Tegra186 and later SoCs as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Per commit 4a9a1a5602 ("arm64: socfpga: merge Agilex and N5X into
ARCH_INTEL_SOCFPGA") and commit 89d4f98ae9 ("ARM: remove zte zx
platform"), they can be dropped from defconfig now.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work
with fw_devlink. So, always compile it in for CONFIG_OF and delete the
config since it's no longer necessary.
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Qualcomm Robotics RB3 Development Kit has a Renesas USB HUB on one
of the PCIe busses, which requires the releated driver to be enabled to
provide functional Ethernet and additional USB host ports.
-----BEGIN PGP SIGNATURE-----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=IzP1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=9k89
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Additional Qualcomm ARM64 defconfig udpate for v5.14
The Qualcomm Robotics RB3 Development Kit has a Renesas USB HUB on one
of the PCIe busses, which requires the releated driver to be enabled to
provide functional Ethernet and additional USB host ports.
* tag 'qcom-arm64-defconfig-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable renesas usb xhci pci host controller
Link: https://lore.kernel.org/r/20210621165015.943060-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
96Boards RB3 has a USB XHCI PCI Renesas host controller. This controller
requires firmware to be loaded on its ROM/RAM, so enable the module
CONFIG_USB_XHCI_PCI_RENESAS. This depends on CONFIG_USB_XHCI_PCI so
enable that as well.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210615081749.3210344-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This enables VADC, audio codecs and Venus (video decoder) found on
MSM8916 among others and the SM8350 interconnect provider driver.
-----BEGIN PGP SIGNATURE-----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=Uyjq
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig udpates for v5.14
This enables VADC, audio codecs and Venus (video decoder) found on
MSM8916 among others and the SM8350 interconnect provider driver.
* tag 'qcom-arm64-defconfig-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: add drivers needed for DragonBoard410c
arm64: defconfig: qcom: enable interconnect for SM8350
Link: https://lore.kernel.org/r/20210614223704.393042-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Set MMC_MTK as built-in to be able to boot from MMC device.
-----BEGIN PGP SIGNATURE-----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=MS0W
-----END PGP SIGNATURE-----
Merge tag 'v5.13-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
- Delete MTK_PMIC_WRAP added twice.
- Set MMC_MTK as built-in to be able to boot from MMC device.
* tag 'v5.13-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: defconfig: Allow Mediatek boards to boot from the mmc
arm64: defconfig: Do not override the MTK_PMIC_WRAP symbol
Link: https://lore.kernel.org/r/ad6f7f4e-7e4d-08b9-8781-71bd78444929@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the Exynos UFS controller and PHY configs. They need to be
buildin to ensure UFS devices gets detected on exynos7 and its
variant boards.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20210531170057.7730-1-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
There is a clock driver that's needed when using an external
USB reference clock called usb2_clksel.
Enable it in the defconfig.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-3-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Most Layerscape SoCs support ECC error reporting for the memory
controller. Enable the corresponding module. In particular, this will
enable EDAC support on the Kontron sl28 board which comes with ECC
memory.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the MMC_MTK option necessary to boot Mediatek boards from the
mmc. Booting from the mmc is the common method used for a bunch of
boards, specially Chromebooks, to boot from. Hence this driver is
built-in.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210423075250.2616275-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Commit 'fbbe38309d56 ("arm64: defconfig: Allow mt8173-based boards to boot
from usb")' added the MTK_PMIC_WRAP config built-in. It needs to be
built-in in order to be able to boot from USB or the MMC without needing
a ramdisk, but that symbol was already defined as a module so now we are
getting the following warning:
arch/arm64/configs/defconfig:996:warning: override: reassigning to symbol MTK_PMIC_WRAP
Remove the MTK_PMIC_WRAP=m from the defconfig to remove the error.
Fixes: fbbe38309d ("arm64: defconfig: Allow mt8173-based boards to boot from usb")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210423075201.2616023-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the merge commit
and on the AsahiLinux wiki.
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=pBZy
-----END PGP SIGNATURE-----
Merge tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Apple M1 platform support from Arnd Bergmann:
"The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the commit message of
commit 1bb2fd3880 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the
AsahiLinux wiki"
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
* tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
asm-generic/io.h: Unbork ioremap_np() declaration
arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree
dt-bindings: display: Add apple,simple-framebuffer
arm64: Kconfig: Introduce CONFIG_ARCH_APPLE
irqchip/apple-aic: Add support for the Apple Interrupt Controller
dt-bindings: interrupt-controller: Add DT bindings for apple-aic
arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h
of/address: Add infrastructure to declare MMIO as non-posted
asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np
arm64: Implement ioremap_np() to map MMIO as nGnRnE
docs: driver-api: device-io: Document ioremap() variants & access funcs
docs: driver-api: device-io: Document I/O access functions
asm-generic/io.h: Add a non-posted variant of ioremap()
arm64: arch_timer: Implement support for interrupt-names
dt-bindings: timer: arm,arch_timer: Add interrupt-names support
arm64: cputype: Add CPU implementor & types for the Apple M1 cores
dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles
dt-bindings: arm: apple: Add bindings for Apple ARM platforms
dt-bindings: vendor-prefixes: Add apple prefix
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=iidq
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
The usual set of defconfig updates, enabling newly added drivers.
There are platform updates for at91, omap, ux500 and qcom platforms,
and a number of changes to the arm64 defconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=SauY
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"The usual set of defconfig updates, enabling newly added drivers.
There are platform updates for at91, omap, ux500 and qcom platforms,
and a number of changes to the arm64 defconfig"
* tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: configs: qcom_defconfig: Reduce CMA size to 64MB
ARM: configs: qcom_defconfig: Enable GLINK SMEM driver
ARM: configs: qcom_defconfig: Enable SDX55 interconnect driver
ARM: configs: qcom_defconfig: Enable Q6V5_PAS remoteproc driver
ARM: configs: qcom_defconfig: Enable CPUFreq support
ARM: configs: qcom_defconfig: Enable SDX55 A7 PLL and APCS clock driver
ARM: configs: qcom_defconfig: Enable APCS IPC mailbox driver
ARM: configs: Remove REGULATOR_USERSPACE_CONSUMER
ARM: configs: ux500: Update for new drivers
arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks
arm64: defconfig: Allow mt8173-based boards to boot from usb
ARM: configs: at91: Modernize UBI defconfig part
ARM: configs: at91: Add USB Video webcam class
ARM: configs: at91: Add mtd tests as modules
ARM: configs: at91: sama5: Add audio MIKROE PROTO board
ARM: configs: at91: sama5: Enable LAN78XX as module
ARM: configs: at91: sama5: PIOBU as built-in
ARM: configs: at91: sama5: MCP16502 regulator as built-in
ARM: configs: at91: sama5: enable the Hantro G1 engine
ARM: configs: at91: sama5: update with savedefconfig
...
This enables the SM8350 TLMM and GCC drivers, needed to boot the
platform.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmBp7XsbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FH8YP/0eBFr+4HDacw90lt5cy
vWkEX+yXymuFb9HtHRG69bgNMUPNRPDl6sR7Jdq6Clb5LaE541XdhrHYeWtdNCNK
LSZyuqgMj3+kqtIsvNKCOQ1vxuwfd893dlX0mOKIMHl7OW4ti6MDsl9uFQZyVfeG
yuPYo2iIgmZYPssLKUfOkUWc41mV1M7RWeOXGPawbmtwb1BjjJ8dNtngvpV0sQTZ
YOqx+fivcI0v5wUfBNQs5zYa1pzDb6+7WxLLyJfqZ8qO3DJRAO7KIXhCoSKDnhAr
wYTJpvK26a09q1jW5MRaMHBQdELbd+1C8WCJyogxvXWTMUV/X7WbctoLZ/Y1dmqO
difsC6a3Vxj7NXxpeFvhz0ZmBYV53N4eMEHnU6wcKtSse2lPNZN//8+ohj+cC7hK
pca3B1p6o7S5Y3bL9Iy/T+zEuSAXu41vpzUI5dqmuSjkex38el/ymxzKM6wzEZU2
OHp9Lrcbek+jd1hjwixN/4KISO8HjWqAsWvGMLUCoMao/lQqP03kmE8AOJq0IKMm
YpsafVq1pUbjDc6KDgs8wxPOIAwQUXM0quF+2Bo8z0madeKxVAuz6t8A8DrxATaG
8BRvk1MWMAEKrQ6ycThFy2cNjr9BY3liI/r0j78Ote9K1xMSC+cFt0fnG5fr+JUT
/aZl/9lpE68RuOK7IKUIJF0h
=3aF9
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig udpate for 5.13
This enables the SM8350 TLMM and GCC drivers, needed to boot the
platform.
* tag 'qcom-arm64-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SM8350 TLMM and GCC
Link: https://lore.kernel.org/r/20210404164841.712845-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a Kconfig option to toggle support for Apple ARM SoCs.
At this time this targets the M1 and later "Apple Silicon" Mac SoCs.
Signed-off-by: Hector Martin <marcan@marcan.st>
-----BEGIN PGP SIGNATURE-----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=g3jG
-----END PGP SIGNATURE-----
Merge tag 'v5.12-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
Enable option to boot MediaTek based chromebook (mt8173 and mt8183) with defconfig
* tag 'v5.12-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks
arm64: defconfig: Allow mt8173-based boards to boot from usb
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It includes a number of arm64 defconfig update for i.MX8 devices
support. The following ones might deserve some notes.
- Although Hantro decoder driver are sitting in staging, people already
find it's quite useful on i.MX8M devices.
- i.MX PCIe driver has no option for module build.
- REALTEK_PHY becomes a built-in driver, because it's used on quite some
i.MX8 reference boards where people want to boot via NFS.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBj9KcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5o5wgAhADJ5eUxUD1yrgU7P8aa/WY7QjLD
XluMFtpAaI9cXAXX3cy/4JpCb9tTXMisyvG/Kr9bt+PVQOHK892U1nybdkX+VBAC
CNTfIbHYKxHE3CdkjGqIk4CA+vx+wH151bwZThWrkiBAE5Oaqcb3aVmmcFGLUvfr
MB1JAW8dsTk3+0bmYcpRtMfFxPWoSDtgGtAQANqpROJGlJ5cv/DlDTmqbgsu8Yc4
pyjBeeKkJTc9bXw2LxVHS3H7Ozew4rJ0hEdsYWwU7emYVQzu2di9kwfnMkzDZS7F
Zxifjyen4TVWqFgxUQ3dng8B3d2tQvs6ini3b1Q5fLe5lkHTPWunIuMpAQ==
=FfMm
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.13:
It includes a number of arm64 defconfig update for i.MX8 devices
support. The following ones might deserve some notes.
- Although Hantro decoder driver are sitting in staging, people already
find it's quite useful on i.MX8M devices.
- i.MX PCIe driver has no option for module build.
- REALTEK_PHY becomes a built-in driver, because it's used on quite some
i.MX8 reference boards where people want to boot via NFS.
* tag 'imx-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: configs: enable FlexTimer alarm timer
arm64: configs: Select REALTEK_PHY as built-in
arm64: configs: Enable PCIe support for imx8mq boards
arm64: defconfig: Enable the Hantro decoder
arm64: defconfig: add imx8qm pinctrl support
arm64: defconfig: Enable wm8960 audio driver.
arm64: defconfig: Enable asoc simple mux
arm64: defconfig: Enable devfreq support for i.MX8MQ
Link: https://lore.kernel.org/r/20210331041019.31345-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are some Mediatek based Chromebooks supported in the kernel. Enable the
required config options to have the panel display working on both devices.
This was tested on the ACER Chromebook R13 (MT8173) and the Lenovo
Ideapad Duet (MT8183), but should also enable display support for similar
devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210331090659.4169966-2-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the option necessary to boot mt8173-based boards to boot from
usb devices, like its phy and the regulators needed to have proper
support.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210331090659.4169966-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This driver is used on Layerscape SoCs to wake up the system from
standby. It works in conjunction with the RCPM driver. The latter is
only available as a builtin.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On the i.MX8MP EVK board there is a RTL8211 EThernet PHY and
a typical use case is to boot via NFS. In this case the Ethernet
PHY driver needs to be built-in, so select the driver as built-in
by default.
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable in defconfig two Intel ARM64 architectures: the eASIC N5X SoCFPGA
and Keem Bay SoC. This allows compile coverage when building default
config.
For the N5X (and Agilex) enable also DesignWare SPI controller in MMIO.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and
SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From
the Linux kernel point of view these are flavors of the same
architecture so there is no need for three top-level arm64
architectures. Simplify this by merging all three architectures into
ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries.
The side effect is that the INTEL_STRATIX10_SERVICE will now be
available for both 32-bit and 64-bit Intel SoCFPGA, even though it is
used only for 64-bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Enable PCI_IMX6 to get PCI support for imx8mq boards like imx8mq-evk,
imx8mq-kontron-pitx-imx8m and imx8mq-zii-ultra.
The driver only has build-in support and cannot be compiled as module.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the Hantro decoder driver so it can be enabled by
default on i.MX8M and Rockchip platforms.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We've had DEBUG_INFO enabled for arm64 defconfigs since the initial
commit. This is probably not that frequently used but substantially
inflates the size of the build tree and amount of I/O needed during the
build. This was causing issues with storage usage in some automated CI
environments which don't expect defconfigs to be quite this big, and
generally increases the resource consumption for both them and people
doing local builds. The main use case for the debug info is decoding
things with scripts/faddr2line but that doesn't need the full
DEBUG_INFO, DEBUG_INFO_REDUCED is enough for it, so enable that by
default.
Without this patch my build tree is 6.8G, with it the size drops to 2G
(smaller than the 6.4G for allmodconfig!).
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210304174407.17537-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Except MX8QM pinctrl driver is missing, all other necessary drivers
for a booting are reused from MX8QXP which are already enabled
in defconfig.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This driver is used by the Nitrogen8m Mini SBC.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is needed to model the mic input mux on the Librem 5 devkit.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is needed to make DRAM frequency scaling via devfreq as used
on the Librem 5 and Librem 5 Devkit.
With the interconnect support enabled we now need imx devfreq on top
to make this work.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the Qualcomm SM8350 TLMM pinctrl and GCC clock drivers. They need
to be builtin to ensure that the UART is allowed to probe before user
space needs a console.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210306021021.1173860-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Pull HID updates from Jiri Kosina:
- support for "Unified Battery" feature on Logitech devices from Filipe
Laíns
- power management improvements for intel-ish driver from Zhang Lixu
- support for Goodix devices from Douglas Anderson
- improved handling of generic HID keyboard in order to make it easier
for userspace to figure out the details of the device, from Dmitry
Torokhov
- Playstation DualSense support from Roderick Colenbrander
- other assorted small fixes and device ID additions.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (49 commits)
HID: playstation: add DualSense player LED support.
HID: playstation: add microphone mute support for DualSense.
HID: playstation: add initial DualSense lightbar support.
HID: wacom: Ignore attempts to overwrite the touch_max value from HID
HID: playstation: fix array size comparison (off-by-one)
HID: playstation: fix unused variable in ps_battery_get_property.
HID: playstation: report DualSense hardware and firmware version.
HID: playstation: add DualSense classic rumble support.
HID: playstation: add DualSense Bluetooth support.
HID: playstation: track devices in list.
HID: playstation: add DualSense accelerometer and gyroscope support.
HID: playstation: add DualSense touchpad support.
HID: playstation: add DualSense battery support.
HID: playstation: use DualSense MAC address as unique identifier.
HID: playstation: initial DualSense USB support.
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E
HID: Ignore battery for Elan touchscreen on HP Spectre X360 15-df0xxx
HID: logitech-dj: add support for the new lightspeed connection iteration
HID: intel-ish-hid: ipc: Add Tiger Lake H PCI device ID
HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming
...
As usual, a number of additional device drivers that were added
to the kernel are now enabled in the respective configuration
files. A few of the files get updated to match the current
Kconfig files for removed or renamed options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=9G1K
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a number of additional device drivers that were added to the
kernel are now enabled in the respective configuration files.
A few of the files get updated to match the current Kconfig files for
removed or renamed options"
* tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: configs: sama5_defconfig: add QSPI driver
ARM: configs: at91_dt_defconfig: add ov7740 module
ARM: configs: at91_dt_defconfig: add useful helper options
ARM: configs: at91: DT/ATAG defconfig modifications
ARM: configs: sama5_defconfig: update and remove unneeded options
ARM: configs: at91: enable drivers for sam9x60
arm64: defconfig: Enable RT5659
arm64: configs: Support DEVAPC on MediaTek platforms
arm64: configs: Support pwrap on Mediatek MT6779 platform
arm64: defconfig: Enable PF8x00 as builtin
ARM: multi_v7_defconfig: add STM32 CEC support
arm64: defconfig: Enable vibra-pwm
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: Update for moved options
ARM: multi_v7_defconfig: Enable nvmem's rmem driver
arm64: defconfig: Enable nvmem's rmem driver
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
ARM: qcom_defconfig: Enable Command DB driver
ARM: qcom_defconfig: Enable RPMh power domain driver
ARM: qcom_defconfig: Enable ARM PSCI support
...
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmAd1GIQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVktB/9L6zZzqTK7IIPn9XLXVYEP8Am6+nfsK1pZ
YGE5xrOaLhE3t5Kpq202xBDBkBId0poU5o6TW+QZHnSbS2uUEh88RpqE0O/Ozagz
cES+owdGcF+rPaRzghD91ESyumH9ys2rEoy8PFxl6BeHPggGwTRlCeCu2UPaUqbz
pxdoT6ySkc61Waf1K8dMgMl4Up3Tkx2u8kMSxvsru3GoO7K+43nB/6WyTsfD/y2b
q1gZUN2x9/HHFjPH76AFVVJ97DU7KtW3z9X4utn41uxSGspQWJXp/6Y5FbdahMRp
dEvy4AyAMMuzkgQgmlpmGKSpk9ZKPKuRb9n2DKTJWwia94SHEbqx
=0bTQ
-----END PGP SIGNATURE-----
Merge tag 'v5.12-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/defconfig
Enable REGULATOR_MP8859 - the main power supply for one Rockchip board.
* tag 'v5.12-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: Enable REGULATOR_MP8859
Link: https://lore.kernel.org/r/4622596.31r3eYUQgx@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAbowwUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4U5gf+PPpo0Tc8ys0z85tMxh3Yzk7L9jMG
MXIsD4dWjWhZZJV6oWH4HYxuQjqvrYbcprdrdeip/q//S0ch8farB2yft5E2+4el
RhqSig5Y0uySgVg/lJWtDSI4x5E7m0IMJBMydBdV0d/S+lXOXagKNNS4HgB7HWX9
DCPct6Img1RGcAFWw2dAaDZr5WHvrL28bA72SFBaSVh33bXjwoccl+p4rwCdHB24
OTVLHlpiPKo5gO7WxtQnGQuyzDpNstoLPQCfbOyDa0rS+eAA7o/CqaaU2o2Zshw/
hzs/xJiX1sMrRQ0lO7Atl98vYF/oUFlWAeBcIj7TCSz90nLus0NuojUD1g==
=Nud0
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.12:
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable PF8x00 as builtin
arm64: defconfig: Enable vibra-pwm
arm64: defconfig: Enable Broadcom BCM54140 PHY
arm64: defconfig: Enable interconnect for imx8mq
arm64: defconfig: Enable PCA9532 support
arm64: defconfig: Enable rv3028 i2c rtc driver
arm64: defconfig: Enable Librem 5 devkit components
ARM: imx_v6_v7_defconfig: enable power driver of RN5T618 PMIC family
arm64: defconfig: Enable WM8962
Link: https://lore.kernel.org/r/20210204120150.26186-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables HID multitouch and TMPFS Posix ACL, for off-the-shelf
distro support on the Snapdragon laptops. It also enables display
clocks, audio configs and the LT9611UXC HDMI bridge for used on the
SM8250 and specifically RB5 board.
-----BEGIN PGP SIGNATURE-----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=Xdw5
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for 5.12
This enables HID multitouch and TMPFS Posix ACL, for off-the-shelf
distro support on the Snapdragon laptops. It also enables display
clocks, audio configs and the LT9611UXC HDMI bridge for used on the
SM8250 and specifically RB5 board.
* tag 'qcom-arm64-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SM8250 audio config
arm64: defconfig: enable Lontium LT9611UXC bridge driver
arm64: defconfig: enable display clock controller on sm8250
arm64: defconfig: Enable TMPFS Posix ACL
arm64: defconfig: Enable HID multitouch
Link: https://lore.kernel.org/r/20210204051956.388355-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the RT5659 audio codec driver. Jetson AGX Xavier has RT5658 codec
which is compatible with this driver. This enables user to test external
audio.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Bard Liao <bardliao@realtek.com>
- build DEVAPC as a module
-----BEGIN PGP SIGNATURE-----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=gUHF
-----END PGP SIGNATURE-----
Merge tag 'v5.11-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
- build PMIC wrapper as a module
- build DEVAPC as a module
* tag 'v5.11-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: configs: Support DEVAPC on MediaTek platforms
arm64: configs: Support pwrap on Mediatek MT6779 platform
Link: https://lore.kernel.org/r/aa5c6673-f018-00d3-42da-46a4976d8ef7@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver is mandatory for the nitrogen8m mini board
when booting from the sdcard slot.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The haptic motor for the Librem 5 uses this.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Devicetree patches for SDM845 introduced in v5.11 requires the
platform's interconnect driver to be buildin, or the kernel will fail to
provide a valid console when we hit userspace.
-----BEGIN PGP SIGNATURE-----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=DQAs
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 defconfig fixes for v5.11
Devicetree patches for SDM845 introduced in v5.11 requires the
platform's interconnect driver to be buildin, or the kernel will fail to
provide a valid console when we hit userspace.
* tag 'qcom-arm64-defconfig-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Make INTERCONNECT_QCOM_SDM845 builtin
Link: https://lore.kernel.org/r/20210125232412.642834-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit enables Tegra audio graph card driver which is based on
the generic audio-graph card driver. This is intended to be used
on platforms based on Tegra210 and later chips.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the Tegra SoC Thermal driver that is used by Tegra132 and
Tegra210 platforms to be built as a module by default for ARM64 builds.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The i2c-hid driver has been split in two. Let's enable both halves.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Enable support for the QuadPHY on the Kontron K-Box A-230-LS. Enable
the driver as a module.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable lt9611uxc driver for Lontium DSI to HDMI bridge found on Qualcomm
RB5 Robotics platform. Enable this driver to get display working on this
platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201228151827.4019213-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the driver for the display clock controller on Qualcomm SM8250,
needed in order to get the display working. This driver provides
power-domains and as such should not be compiled as a module.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201228151225.4018477-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
available.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable rv3028 i2c rtc driver as module. It is populated on
phyBOARD-Pollux-i.MX8M Plus.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Librem 5 devkit is based on NXP's i.MX8MQ. Schematics are at
https://source.puri.sm/Librem5/dvk-mx8m-bsb.
This enables drivers for the following hardware components that aren't
yet enabled in defconfig:
- Goodix GT5688 touchscreen
- iMX8MQ's PWM for the LCD backlight
- TI BQ25896 charge controller
- NXP SGTL5000 audio codec
- Microcrystal RV-4162-C7 RTC
- magnetometer: CONFIG_IIO_ST_MAGN_3AXIS
- the SIMCom SIM7100E/A modem
- NXP PTN5110HQZ usb-c controller
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
RK3399 boards like ROC-RK3399-PC is using MP8859 DC/DC converter
for 12V supply.
roc-rk3399-pc initially used 12V fixed regulator for this supply,
but the below commit has switched to use MP8859.
commit <1fc61ed04d309b0b8b3562acf701ab988eee12de> "arm64: dts: rockchip:
Enable mp8859 regulator on rk3399-roc-pc"
So, enable by default on the defconfig.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200731160324.142097-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Zynqmp Ultrascale clock controller generates clocks for peripherals
by default. So enable this clock driver for ZynqMP platforms.
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20201209021416.1017790-1-quanyang.wang@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The Beacon EmbeddedWorks development kits supporting i.MX8M Mini
and Nano have an WM8962 audio CODEC installed. Add modules for both
CONFIG_SND_SOC_WM8962 and CONFIG_SND_SOC_FSL_ASOC_CARD to enable them.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As of v5.11-rc1 the QUP nodes of SDM845 has got their interconnect
properties specified, this means that the relevant interconnect provider
needs to be builtin for the UART device to probe and the console to be
registered before userspace needs to access it.
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201222043745.3420447-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already support.
This is also known as the SigmaStar SSD202D, and we add support for
the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the Ampere
Altra based "Fii Kudo" server and the Quanta GSJ, both of which are
added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's
generation, also added along with its reference board. This one is
still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into low-end
tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM,
and one machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board
for the aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape
LX2162A, which is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based board,
- IEI Puzzle-M801, a rackmount network appliance based on
Marvell Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm
sm8250 and sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook
(sc7180)
- New board variants of the Renesas based "Kingfisher" and
"HiHope" reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with
a few carrier boards.
There is one conflict in mt6577_auxadc.txt, which got replaced in
another tree and modified here, the modification is already part of
the new file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=R47r
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
These are the usual defconfig updates, adding support for additional
modules and updating some files according to changes in Kconfig.
I also include the removal of CONFIG_BACKLIGHT_GENERIC across multiple
architectures, after the driver was removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=kCa2
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"These are the usual defconfig updates, adding support for additional
modules and updating some files according to changes in Kconfig.
I also include the removal of CONFIG_BACKLIGHT_GENERIC across multiple
architectures, after the driver was removed"
* tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
powerpc/configs: drop unused BACKLIGHT_GENERIC option
parisc: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: drop unused BACKLIGHT_GENERIC option
ARM: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: Enable more Librem 5 hardware
arm64: defconfig: Enable RTC_DRV_HYM8563
arm64: defconfig: Enable USB_SERIAL_CP210X
arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY
arm64: defconfig: Enable ROCKCHIP_LVDS
arm64: defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: enable STM32 dfsdm audio support
ARM: multi_v7_defconfig: enable STM32 spdifrx support
ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support
ARM: multi_v7_defconfig: add STM32 crypto support
ARM: multi_v7_defconfig: enable counter subsystem and stm32 counter drivers
ARM: multi_v7_defconfig: make Samsung Exynos EHCI driver a module
arm64: defconfig: Enable Qualcomm PON driver
ARM: omap2plus_defconfig: Enable TI eQEP counter driver
ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
...
New drivers:
- New driver for the Microchip Serial GPIO "SGPIO".
- Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.
New subdrivers:
- Intel Lakefield subdriver.
- Intel Elkhart Lake subdriver.
- Intel Alder Lake-S subdriver.
- Qualcomm MSM8953 subdriver.
- Qualcomm SDX55 subdriver.
- Qualcomm SDX55 PMIC subdriver.
- Ocelot Luton SoC subdriver.
- Ocelot Serval SoC subdriver.
Modularization:
- The Meson driver can now be built as modules.
- The Qualcomm driver(s) can now be built as modules.
Incremental improvements:
- The Intel driver now supports pin configuration for GPIO-related
configurations.
- A bunch of Renesas PFC drivers have been augmented with support
for QSPI pins, groups and functions.
- Non-critical fixes to the irq handling in the Allwinner Sunxi
driver.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl/ab9AACgkQQRCzN7AZ
XXOp5w/7B3JTngCneTa8jBG8rPv94zWMpnqvXBPhK1AZPB53IR48F2ssJMIhwJsj
4QRVjPhnrowqEZjOxr5Ia+pjnQvPL5JP8F/xKiZf5BpS6ccvQQFKdUcDHYzllffr
davHSReb1YIDSST8M/iO9Iqjl2r6/5wLg0OQR26CpDhJc29I93xQA08OuLhqa33v
SibmlCeizScn39gCcwZmfrdvJMPYcUE7zE1v38LgDAp9vt2dsdwAUQ6n8GBQYJF9
NgBA4LwLYlbVHEdhd/I8mNmAbKSpeHxFgKSEWyAaqYRDZkBmsHAEiliWVcnnBmW3
kH76FC+jMHW5dDII8vMAKB5c1Col/7GM4722+NnolPO9vTs93hT0aNy3l5Eh/nWN
DUIZOqvMW4c5M5XZ8prKuTdBfCc3jC3BKiaTKQm/wJMY4SQpTjerB4jnWqRrzTus
tlndz8bezQxwKkx8BAhLc5pE1zQEn5ZznLXqy62RMwd6ymdtOg4ZALQ9nyj2luaP
cGoODMHNHA7BuaZ+dcIoikElCdeSiTNEfO53/UQiVi8BOx0zNT6ul9VlIgC+Utsk
DVYAExg+yF5qw+2xhJxBoK4DqqVSe7xTbqrcY1oLdnWhfz8yGkHh91ONos+9u1sY
2vnjNW4BIfSgEApbZIb7KRS0VCKXh4BzdI9+W9uKhsn6JIYyo1g=
=e5sV
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.11 kernel.
Drivers, drivers and drivers. Not a single core change.
Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot
SoCs.
As part of the modularization attempt, I applied one patch affecting
the firmware subsystem as a functional (not syntactic/semantic)
dependency and then it blew up in our face, so I had to revert it,
bummer. It will come in later, through that subsystem, I guess.
New drivers:
- New driver for the Microchip Serial GPIO "SGPIO".
- Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.
New subdrivers:
- Intel Lakefield subdriver.
- Intel Elkhart Lake subdriver.
- Intel Alder Lake-S subdriver.
- Qualcomm MSM8953 subdriver.
- Qualcomm SDX55 subdriver.
- Qualcomm SDX55 PMIC subdriver.
- Ocelot Luton SoC subdriver.
- Ocelot Serval SoC subdriver.
Modularization:
- The Meson driver can now be built as modules.
- The Qualcomm driver(s) can now be built as modules.
Incremental improvements:
- The Intel driver now supports pin configuration for GPIO-related
configurations.
- A bunch of Renesas PFC drivers have been augmented with support for
QSPI pins, groups and functions.
- Non-critical fixes to the irq handling in the Allwinner Sunxi
driver"
* tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl/spear: simplify the return expression of spear300_pinctrl_probe()
pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1()
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support
pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)
pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
pinctrl: qcom-pmic-gpio: Add support for pmx55
dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword
pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error
pinctrl: mtk: Fix low level output voltage issue
pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
pinctrl: actions: pinctrl-s500: Constify s500_padinfo[]
pinctrl: pinctrl-microchip-sgpio: Add OF config dependency
pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver
pinctrl: at91-pio4: add support for fewer lines on last PIO bank
pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler
pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON
pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller
...
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
for 5.11, please pull the following:
- Rafal adds initial support for the Broadcom 4908 which are SoCs used
in home routers and are based on the DSL architecture and using
Broadcom Brahma-B53 CPUs.
-----BEGIN PGP SIGNATURE-----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=oz5b
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.11, please pull the following:
- Rafal adds initial support for the Broadcom 4908 which are SoCs used
in home routers and are based on the DSL architecture and using
Broadcom Brahma-B53 CPUs.
* tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: add config for Broadcom BCM4908 SoCs
arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files
dt-bindings: arm: bcm: document BCM4908 bindings
Link: https://lore.kernel.org/r/20201128163410.1691529-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 7ecdea4a02 ("backlight: generic_bl: Remove this driver as it is
unused") removed geenric_bl driver from the tree, together with
corresponding config option.
Remove BACKLIGHT_GENERIC config item from arm64 configuration.
Fixes: 7ecdea4a02 ("backlight: generic_bl: Remove this driver as it is unused")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20201201222922.3183-3-andrey.zhizhikin@leica-geosystems.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of patches that enable various i.MX audio drivers for i.MX8M.
- Enable more drivers that are useful on Librem 5 hardware.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl/HokMUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6oCggAs8waHnriWnEi6pBv/vuX1GFNPsoj
EmPk505RL6akL+QiGwFl9L4/k+khuZRgUbUfgsrx1qTcpu3XyKrIfABmez1vJIXT
staufuHoOsgjJUzP+aeuyoc/PVhq1EtV/xPAjQrhIHnET5NxIJPiOg+caHnLyD71
Z9hJYy72o1S4p+FMVjB5icc9P/yZh7fZNBj3eH7x8YF0jRnePoDomykIPua+xt19
Qtz1mSg9YZF1NXXrY+TX5BP7J0byeCgicFRrV9VLIMnv2qq3oKKwqpTFjw52G4IL
dinAlOtKhuVmMprveDXVUHyzpifTaCOF7vjwA9By8sJCkJTKgz9x02KcjQ==
=LJQK
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.11:
- A couple of patches that enable various i.MX audio drivers for i.MX8M.
- Enable more drivers that are useful on Librem 5 hardware.
* tag 'imx-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable more Librem 5 hardware
arm64: defconfig: Enable ASRC and EASRC
arm64: defconfig: Enable additional sound drivers on i.MX8M Mini
Link: https://lore.kernel.org/r/20201202142717.9262-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the Qualcomm PON and OSM L3 drivers. It then ensures that
the QCOM_SCM and Command DB drivers are built-in, now that they have
been made user selectable and tristate.
-----BEGIN PGP SIGNATURE-----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=slxb
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm defconfig updates for 5.11
This enables the Qualcomm PON and OSM L3 drivers. It then ensures that
the QCOM_SCM and Command DB drivers are built-in, now that they have
been made user selectable and tristate.
* tag 'qcom-arm64-defconfig-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm PON driver
arm64: defconfig: Enable QCOM_SCM as builtin
arm64: defconfig: Enable Qualcomm OSM L3 driver
arm64: defconfig: Enable Qualcomm Command DB driver
Link: https://lore.kernel.org/r/20201130190124.345127-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- GPIO and I2C for J721E SD card support to be functional
-----BEGIN PGP SIGNATURE-----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=+rdo
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-config-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/defconfig
ARM64 defconfig changes for TI K3 platforms for v5.11 merge window:
- GPIO and I2C for J721E SD card support to be functional
* tag 'ti-k3-config-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux:
arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
Link: https://lore.kernel.org/r/20201130174850.ni4sdyz3qp67j3sz@upstart
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
the following:
- Florian enables the ARM SCMI protocol, and the common clock, HWMON and
CPU frequency scaling drivers since those are used by ARCH_BRCMSTB
platforms
-----BEGIN PGP SIGNATURE-----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=8JN3
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.11/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains ARM64 defconfig changes for 5.11, please pull
the following:
- Florian enables the ARM SCMI protocol, and the common clock, HWMON and
CPU frequency scaling drivers since those are used by ARCH_BRCMSTB
platforms
* tag 'arm-soc/for-5.11/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable ARM SCMI protocol and drivers
Link: https://lore.kernel.org/r/20201128163410.1691529-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX8IzNQAKCRDj7w1vZxhR
xRGVAQCz65FoHboWxCwXPuduSZ6sCkyRjdSzw84U7qJzrWHgVgD+MR93mv7aYM4A
x+S/Pa1sxH3awHUw8JDmT51Qt0JijgU=
=rDZm
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
One patch to enable the Allwinner I2S controller on arm64's defconfig
* tag 'sunxi-config64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable Allwinner i2s driver
Link: https://lore.kernel.org/r/5ddf5486-a20c-467a-bc67-d5e8fbc38856.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some hardware platforms required CP20x USB to Serial converter
in order to work onboard functionalities like Bluetooth.
An example of such a platform is from Engicam's PX30 (ARM64).
Mark it as module in defconfig.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-10-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In order to work LDVS, DSI in mainline tree for Rockchip based
hardware platforms, the associated PHY driver has to enable
in default defconfig.
Enable rockchip DSI phy driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-9-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Now, some of the rockchip hardware platforms do enable
lvds in mainline tree.
So, enable Rockchip LVDS driver via default defconfig.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-8-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the ARM SCMI protocol and the common clock, cpufreq, reset and
sensors drivers. Broadcom STB platforms (ARCH_BRCMSTB) implement SCMI to
provide support for CPU frequency scaling, clock configuration and
temperature and current sensors.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
The Tegra234 VDK support that was introduced in v5.10-rc1 is now enabled
by default.
-----BEGIN PGP SIGNATURE-----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=KgUW
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.11-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration changes for v5.11-rc1
The Tegra234 VDK support that was introduced in v5.10-rc1 is now enabled
by default.
* tag 'tegra-for-5.11-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable Tegra234 support
Link: https://lore.kernel.org/r/20201127144329.124891-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add ARCH_BCM4908 config that can be used for compiling DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The PON block in the PMIC provides, among other things, support for
"reboot reason", power key and reset "key" handling. Let's enable the
driver for this block.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201125023831.99774-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
- Enable support for the new R-Car V3U SoC in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.10-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX66RqgAKCRCKwlD9ZEnx
cLC5AP493HI4gYGzpdkwikaOR6sMM5iwI0v3n1AYcuw79Ep11gEAyEg0DpLMAOG8
aHDYqSv6Zo10pYjbHBJRwYRrOJMarw4=
=eio1
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.11
- Enable support for the new R-Car V3U SoC in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.10-rc1.
* tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A779A0 SoC
ARM: shmobile: defconfig: Refresh for v5.10-rc1
Link: https://lore.kernel.org/r/20201113150854.3923885-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm SCM driver was never explicitly enabled in the defconfig.
Instead it was (apparently) selected by DRM_MSM and by the recent change
to make it tristate now became =m.
Unfortunately this removes the ability for PINCTRL_MSM and ARM_SMMU to
be =y and with deferred_probe_timeout defaulting to 0 this means that
things such as UART, USB, PCIe and SDHCI probes with their dependencies
ignored.
The lack of pinctrl results in invalid pin configuration and the lack of
iommu results in the system locking up as soon as any form of data
transfer is attempted from any of the affected peripherals.
Mark QCOM_SCM as builtin, to avoid this.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201118162528.454729-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The OSM L3 interconnect driver is used for scaling the bus to the L3
cache on modern Qualcomm platforms, enable it.
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201113163444.3138807-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add configs to enable regulators that supply power to the SD card
on TI's J721e platform. These regulators are controlled by either
SoC gpios or gpios over i2c expander.
Changes to vmlinux size:
Before:
text data bss dec hex filename
20219067 10875634 523924 31618625 1e27641 vmlinux
After:
text data bss dec hex filename
20228755 10880422 524628 31633805 1e2b18d vmlinux
delta: 15180 (dec)
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20201103190821.30937-1-faiz_abbas@ti.com
This patch reworks PINCTRL_MSM to be a visible option, and
instead of having the various SoC specific drivers select
PINCTRL_MSM, this switches those configs to depend on
PINCTRL_MSM.
This is useful, as it will be needed in order to cleanly support
having the qcom-scm driver, which pinctrl-msm calls into,
configured as a module. Without this change, we would eventually
have to add dependency lines to every config that selects
PINCTRL_MSM, and that would becomes a maintenance headache.
We also add PINCTRL_MSM to the arm64 defconfig to avoid
surprises as otherwise PINCTRL_MSM/IPQ* options previously
enabled, will be off.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20201106042710.55979-1-john.stultz@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Qualcomm Command DB driver seems to have been indirectly enabled by
the Qualcomm DRM driver and up until the introduction of '778279f4f5e4
("soc: qcom: cmd-db: allow loading as a module")' this resulted in the
driver "always" being builtin on arm64. But with the introduction of
said change it, and all other RPMH related drivers, becomes =m.
The immediate result is that the uart driver fails to probe, which
depending on userspace's dependency on the presence of /dev/console
might be fatal. For systems getting past this the default timeout of 0
seconds for probe deferral of many subsystems causes the system to be
completely useless.
So, make Command DB builtin.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201103010850.757500-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The i.MX8M Nano supports the EASRC driver, and it requires ASRC.
Enable both of them as modules.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M Mini has micfil and SPDIF support but the drivers
are not being loaded.
This patch updates the defconfig to add support for these drivers.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX SoC GPIO driver provides the basic functions of GPIO pin operations
and IRQ operations, it is now changed from "def_bool y" to "tristate", so
it should be explicitly enabled to make sure all consumers work normally.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=T9BC
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits)
ARM: multi_v7_defconfig: add FMC2 EBI controller support
arm64: defconfig: enable Qualcomm ASoC modules
arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50
arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable Qcom SNPS Femto PHY
ARM: configs: Update Realview defconfig
ARM: configs: Update Versatile defconfig
ARM: config: aspeed_g5: Enable IBM OP Panel driver
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of media drivers
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
ARM: omap2plus_defconfig: enable generic net options
ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: defconfig: Build AHUB component drivers
arm64: defconfig: Enable Lontium LT9611 driver
arm64: defcondfig: Enable USB ACM and FTDI drivers
...
Enable Qualcomm related drivers for Lontium LT9611 HDMI bridge, SNPS
high-speed USB PHY, various Interconnect providers, GPU clock
controllers for SM8150 and SM8250 and audio driver for MSM8996 and
APQ8016.
Then enable ACM and FTDI host drivers, which are useful when working
with various development boards using ARM64 hosts.
-----BEGIN PGP SIGNATURE-----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=4h5/
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64defconfig updates for v5.10
Enable Qualcomm related drivers for Lontium LT9611 HDMI bridge, SNPS
high-speed USB PHY, various Interconnect providers, GPU clock
controllers for SM8150 and SM8250 and audio driver for MSM8996 and
APQ8016.
Then enable ACM and FTDI host drivers, which are useful when working
with various development boards using ARM64 hosts.
* tag 'qcom-arm64-defconfig-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm ASoC modules
arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50
arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
arm64: defconfig: Enable Qcom SNPS Femto PHY
arm64: defconfig: Enable Lontium LT9611 driver
arm64: defcondfig: Enable USB ACM and FTDI drivers
Link: https://lore.kernel.org/r/20200924040708.180352-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in
multi_v7_defconfig.
- Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to
support MIPI DSI on imx8mq-evk.
- Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver
in arm64 defconfig to support display on imx8mq-librem5-devkit.
- Enable sl28cpld board management controller driver support in arm64
defconfig.
- Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in
AArch32 mode.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl9q9hYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5O3Af/cYifoTK2/oL+IC9tirmHj+1h4Yqa
F+owysiOlMoqdxhHRYlhiowE5euTEMAQFjKyUxSLoBUnemP0W/t556zcyCvCJgFL
R1ZUm8clACxXYJVlasT7qRhR/T0hVz2BMgIAjWtoY8hTXfxyVr+WurdxLbdUn8cC
6p28DV26xdZeRH/Jrk/4frSWxjCYPNcVmstP8eHcPOOBw7SdrfquOrjMsaZsiAfF
4CzdjhfCBDH0XznTQ5KY9J+Z8Da8fcikM1+VvVb64WlZI9WPHYYmQQclpJomnOHG
L5dJiLFTjQcWXt/TkYaZozyiW8pG8g7gawpom5JJ1SbW3GR7OFP+RTv8RQ==
=qHiE
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.10:
- Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in
multi_v7_defconfig.
- Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to
support MIPI DSI on imx8mq-evk.
- Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver
in arm64 defconfig to support display on imx8mq-librem5-devkit.
- Enable sl28cpld board management controller driver support in arm64
defconfig.
- Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in
AArch32 mode.
* tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable imx8mq-librem5-devkit display stack
arm64: defconfig: re-sync DRM related defconfig bits
ARM: imx_v6_v7_defconfig: Support i.MX8MN/P/Q
ARM: multi_v7_defconfig: Enable i.MX7ULP SoC
ARM: multi_v7_defconfig: Enable i.MX6SLL SoC
ARM: multi_v7_defconfig: enable caam crypto module
Link: https://lore.kernel.org/r/20200923073009.23678-6-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
-----BEGIN PGP SIGNATURE-----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=oMmC
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.10
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
* tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
ARM: exynos_defconfig: enable platform media drivers
Link: https://lore.kernel.org/r/20200920160705.9651-2-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This pair of patches enable the ADMA, ACONNECT and AHUB drivers that
are required for audio support on Tegra210 and later.
-----BEGIN PGP SIGNATURE-----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=bB+p
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.10-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration updates for v5.10-rc1
This pair of patches enable the ADMA, ACONNECT and AHUB drivers that
are required for audio support on Tegra210 and later.
* tag 'tegra-for-5.10-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: defconfig: Build AHUB component drivers
Link: https://lore.kernel.org/r/20200918150303.3938852-6-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable CONFIG_INTERCONNECT and interconnect drivers for several Qualcomm
chipsets to enable bus bandwidth control on these SoCs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200917203913.3250205-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable support for the Toshiba Visconti SoCs.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Enable the kernel modules for the board management controller "sl28cpld"
which is used on the SMARC-sAL28 board.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select the eLCDIF display controller and Raydium RM67191 panel drivers,
so that MIPI DSI can be functional by default on a imx8mq-evk board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ROHM BD718x7 PMIC is present on many designs with i.MX 8M SoCs.
Enable the bd718x7 clock driver which provides PMICs 32 kHz clock.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This commit builds ADMA and ACONNECT drivers which can be used on
Tegra210 and later platforms to transfer audio data to/from AHUB
(Audio Hub).
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch helps to build AHUB and its client drivers (I2S, DMIC,
DSPK, ADMAIF and AHUB). These register components with ASoC core.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Lontium LT9611 HDMI bridge can be found in Dragon Board RB3 for
converting DSI to HDMI. Enable this driver to get display working on RB3
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727080118.1934079-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable USB serial drivers to provide UART access to various development
boards from an ARM64 host.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200703185354.1814337-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This moves the CONFIG_DRM_SIMPLE_BRIDGE entry around making further
updates simpler.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the extcon driver for NXP PTN5150A chips (CC logic for USB Type-C
applications) present on some of i.MX8 evaluation boards (e.g. Variscite
Symphony board).
Link: https://lore.kernel.org/r/20200817065654.4419-2-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
USB OTG connections are pretty common for embedded and development
boards, for example to have networking or serial access to the device.
Build as a module the USB gadget configfs options so the defconfig can
be used in such development configurations.
Link: https://lore.kernel.org/r/20200817065654.4419-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable R-Car PCIe endpoint driver on RZ/G2E board, including enabling
endpoint configurations CONFIG_PCI_ENDPOINT, CONFIG_PCI_ENDPOINT_CONFIGFS,
CONFIG_PCI_EPF_TEST and CONFIG_PCI_ENDPOINT_TEST required to use and test
the driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200811140357.564-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----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=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
As usual, there are many patches addressing minor issues in existing
DTS files, such as DTC warnings, or adding support for additional
peripherals.
There are three added SoCs in existing product families:
- Amazon:
Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
otherwise known as AL73400 or first-generation Graviton, and following
the already supported Cortex-A1`5 and Cortex-A57 based Alpine chips.
This one is added together with the official Evaluation platform.
- Qualcomm:
The Snapdragon SDM630 platform is a family of mid-range mobile phone
chips from 2017 based on Cortex-A53 or Kryo 260 CPUs.
A total of five end-user products are added based on these, all
Android phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and
XA2 Ultra.
- Renesas:
RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
family, and apparently closely related to the RZ/G2N and RZ/G2M
models we already support but has a faster GPU and additional
on-chip peripherals.
It is added along with the HopeRun HiHope RZ/G2H development board
A small number of new boards for already supported SoCs also debut:
- Allwinner sunxi:
Only one new machine, revision v1.2 of the Pine64 PinePhone
(non-Android) smartphone, containing minor changes compared to
earlier versions.
- Amlogic Meson:
WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box
- Aspeed:
EthanolX is AMD's EPYC data center rerence platform, using an
ASpeed AST2600 baseboard management controller.
- Mediatek:
Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook
based on the MT8183 (Helio P60t) SoC.
- Nvidia Tegra:
ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
Thanks to PostmarketOS, these can now run mainline kernels
and become useful again.
The Jetson Xavier NX Developer Kit uses a SoM and carrier board
for the Tegra194, their latest 64-bit chip based on Carmel CPU
cores and Volta graphics.
- NXP i.MX:
Five new boards based on the 32-bit i.MX6 series are added:
The MYiR MYS-6ULX single-board computer, and four different
models of industrial computers from Protonic.
- Qualcomm:
MikroTik RouterBoard 3011 is a rackmounted router based on the
32-bit IPQ8064 networking SoC
Three older phones get added, the Snapdragon 808 (msm8992) based
Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
Windows Phone, and the Snapdragon 810 (msm8994) based Sony
Xperia Z5.
- Renesas:
In addition to the HiHope RZ/G2H board mentioned above, we gain
support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
RZ/G2N reference boards.
Beacon EmbeddedWorks adds another SoM+Carrier development board
for RZ/G2M.
- Rockchips:
Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it
is based on, using the high-end 32-bit rk3288 SoC.
Notable updates to existing platforms are usually for added on-chip
peripherals, including:
- ASpeed AST2xxx (various)
- Allwinner (cpufreq, thermal, Pinephone touchscreen)
- Amlogic Meson (audio, gpu dvdfs, board updates)
- Arm Versatile
- Broadcom (board updates for switch ports, Raspberry pi clock updates)
- Hisilicon (various)
- Intel/Altera SoCFPGA (various)
- Marvell Armada 7xxx/8xxx (smmu)
- Marvell MMP (GPU on mmp2/mmp3)
- Mediatek mt8183 (USB, pericfg)
- NXP Layerscape (VPU, thermal, DSPI)
- NXP i.MX (VPU, bindings, board updates)
- Nvidia Tegra194 (GPU)
- Qualcomm (GPU, Interconnect, ...)
- Renesas R-Car (SPI, IPMMU, board updates)
- STMicroelectronics STM32 (various)
- Samsung Exynos (various)
- Socionext Uniphier (updates to serial, and pcie)
- TI K3 (serdes, usb3, audio, sd, chipid)
- TI OMAP (IPU/DSP remoteproc changes, dropping platform data)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=Tpj3
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, there are many patches addressing minor issues in existing
DTS files, such as DTC warnings, or adding support for additional
peripherals.
There are three added SoCs in existing product families:
- Amazon:
Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
otherwise known as AL73400 or first-generation Graviton, and
following the already supported Cortex-A1`5 and Cortex-A57 based
Alpine chips. This one is added together with the official
Evaluation platform.
- Qualcomm:
The Snapdragon SDM630 platform is a family of mid-range mobile
phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
of five end-user products are added based on these, all Android
phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.
- Renesas:
RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
family, and apparently closely related to the RZ/G2N and RZ/G2M
models we already support but has a faster GPU and additional
on-chip peripherals. It is added along with the HopeRun HiHope
RZ/G2H development board
A small number of new boards for already supported SoCs also debut:
- Allwinner sunxi:
Only one new machine, revision v1.2 of the Pine64 PinePhone
(non-Android) smartphone, containing minor changes compared to
earlier versions.
- Amlogic Meson:
WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box
- Aspeed:
EthanolX is AMD's EPYC data center rerence platform, using an
ASpeed AST2600 baseboard management controller.
- Mediatek:
Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
on the MT8183 (Helio P60t) SoC.
- Nvidia Tegra:
ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
Thanks to PostmarketOS, these can now run mainline kernels and
become useful again.
The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
the Tegra194, their latest 64-bit chip based on Carmel CPU cores
and Volta graphics.
- NXP i.MX:
Five new boards based on the 32-bit i.MX6 series are added: The
MYiR MYS-6ULX single-board computer, and four different models of
industrial computers from Protonic.
- Qualcomm:
MikroTik RouterBoard 3011 is a rackmounted router based on the
32-bit IPQ8064 networking SoC
Three older phones get added, the Snapdragon 808 (msm8992) based
Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
Z5.
- Renesas:
In addition to the HiHope RZ/G2H board mentioned above, we gain
support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
RZ/G2N reference boards. Beacon EmbeddedWorks adds another
SoM+Carrier development board for RZ/G2M.
- Rockchips:
Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
based on, using the high-end 32-bit rk3288 SoC.
Notable updates to existing platforms are usually for added on-chip
peripherals, including:
- ASpeed AST2xxx (various)
- Allwinner (cpufreq, thermal, Pinephone touchscreen)
- Amlogic Meson (audio, gpu dvdfs, board updates)
- Arm Versatile
- Broadcom (board updates for switch ports, Raspberry pi clock updates)
- Hisilicon (various)
- Intel/Altera SoCFPGA (various)
- Marvell Armada 7xxx/8xxx (smmu)
- Marvell MMP (GPU on mmp2/mmp3)
- Mediatek mt8183 (USB, pericfg)
- NXP Layerscape (VPU, thermal, DSPI)
- NXP i.MX (VPU, bindings, board updates)
- Nvidia Tegra194 (GPU)
- Qualcomm (GPU, Interconnect, ...)
- Renesas R-Car (SPI, IPMMU, board updates)
- STMicroelectronics STM32 (various)
- Samsung Exynos (various)
- Socionext Uniphier (updates to serial, and pcie)
- TI K3 (serdes, usb3, audio, sd, chipid)
- TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"
* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
arm64: dts: meson: odroid-n2: add jack audio output support
arm64: dts: meson: odroid-n2: enable audio loopback
ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
arm64: dts: qcom: msm8992: Add RPMCC node
arm64: dts: qcom: msm8992: Add PSCI support.
arm64: dts: qcom: msm8992: Add PMU node
arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
arm64: dts: qcom: msm8992: Add a SCM node
arm64: dts: qcom: msm8992: Add a proper CPU map
arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
arm64: dts: qcom: bullhead: Add qcom,msm-id
arm64: dts: qcom: msm8992: Fix SDHCI1
arm64: dts: qcom: msm8992: Modernize the DTS style
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
arm64: dts: qcom: msm8994: Add support for SMD RPM
arm64: dts: qcom: msm8992: Add a label to rpm-requests
...
- Removal of the tremendously unpopular read_barrier_depends() barrier,
which is a NOP on all architectures apart from Alpha, in favour of
allowing architectures to override READ_ONCE() and do whatever dance
they need to do to ensure address dependencies provide LOAD ->
LOAD/STORE ordering. This work also offers a potential solution if
compilers are shown to convert LOAD -> LOAD address dependencies into
control dependencies (e.g. under LTO), as weakly ordered architectures
will effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic, augment
the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the device
ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions and
kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words.
-----BEGIN PGP SIGNATURE-----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=mh79
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 and cross-arch updates from Catalin Marinas:
"Here's a slightly wider-spread set of updates for 5.9.
Going outside the usual arch/arm64/ area is the removal of
read_barrier_depends() series from Will and the MSI/IOMMU ID
translation series from Lorenzo.
The notable arm64 updates include ARMv8.4 TLBI range operations and
translation level hint, time namespace support, and perf.
Summary:
- Removal of the tremendously unpopular read_barrier_depends()
barrier, which is a NOP on all architectures apart from Alpha, in
favour of allowing architectures to override READ_ONCE() and do
whatever dance they need to do to ensure address dependencies
provide LOAD -> LOAD/STORE ordering.
This work also offers a potential solution if compilers are shown
to convert LOAD -> LOAD address dependencies into control
dependencies (e.g. under LTO), as weakly ordered architectures will
effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at
LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic,
augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the
device ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions
and kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words"
Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
...
- Enable PCA9450 regulator driver in arm64 defconfig.
- Enable RV8803 RTC and FSL_SAI audio support in arm64 defconfig to make
it useful for Kontron sl28 boards.
- Enable i.MX8MM clock and pinctrl driver in imx_v6_v7_defconfig to get
AARCH32 mode kernel work on AARCH64 hardware.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VWPcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM77HQgAshj+pVP6bsje1ToHm1qdeYTiNYEw
rvmEZ+5+S6Qmj8wj7z0pSwAGsUe7ZqkfcOJqRUBOHQHxNKSpTvccg75QX3SQBFPE
1vojpN+XP2cDRyWFe4cbNjoAJV9hudix+AZAJNbhth92Z7YEz/KHu2oIuni6Xqqn
V+qFqqsuTCRUp+4C1rJphGaCnS5ux4E1gDz3Ae1e6LKprk4sPtpo4ViuNLRZDigK
O1RSiQJYcNTWEKdmrKQiMLPcO4elHnsf+kvi5hHXRc3a5h44yQ3qdMmysw/X6n/9
ElbmI9PCeKOaLqmkzsQYBl2M6v24KXjijmjQgA+tf2kZJB+zlSR8RwkqeQ==
=J5lQ
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.9:
- Enable PCA9450 regulator driver in arm64 defconfig.
- Enable RV8803 RTC and FSL_SAI audio support in arm64 defconfig to make
it useful for Kontron sl28 boards.
- Enable i.MX8MM clock and pinctrl driver in imx_v6_v7_defconfig to get
AARCH32 mode kernel work on AARCH64 hardware.
* tag 'imx-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Support i.MX8MM
arm64: defconfig: enable RTC and audio support on Kontron sl28 boards
arm64: defconfig: add pca9450 pmic driver
Link: https://lore.kernel.org/r/20200720085536.24138-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_SDHCI_AM654 to Support AM65x sdhci controller.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
We refactored the CrOS EC drivers moving part of the code from the MFD
subsystem to the platform chrome subsystem. During this change we needed
to rename some config options, so, update the defconfigs accordingly.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that we have the needed network scheduler, we can enable the ENETC
hardware support.
$ scripts/bloat-o-meter old-vmlinux vmlinux
add/remove: 19/2 grow/shrink: 12/0 up/down: 12852/-16 (12836)
[..]
Total: Before=20428273, After=20441109, chg +0.06%
Link: https://lore.kernel.org/r/20200707223114.16355-2-michael@walle.cc
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Newer network cards and switches support offloading of certain packet
scheduling, classifying and actions onto the hardware itself. For
example, time-aware and credit based schedulers. To use this feature we
have to enable the corresponding modules. Please note, that this will
also enable NET_SCHED and NET_CLS_ACT as builtin because there is no
module option. The enabled modules should get us a good foundation.
$ scripts/bloat-o-meter old-vmlinux vmlinux
add/remove: 446/215 grow/shrink: 48/31 up/down: 78445/-11519 (66926)
[..]
Total: Before=20452567, After=20519493, chg +0.33%
Link: https://lore.kernel.org/r/20200707223114.16355-1-michael@walle.cc
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds
the same driver. So this patch renames CONFIG_PCIE_RCAR to
CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from
Kconfig file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1589494238-2933-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Although the Kontron SMARC-sAL28 board is now supported, there is still
missing driver support for the hardware clock, audio interface and audio
codec. Let's enable them as modules (where possible).
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into imx firmware folder
and initialized by i.MX SCU firmware driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
kexec_file_load() syscall interface is now supported for
arm64 architecture as well via commits:
3751e728ce ("arm64: kexec_file: add crash dump support") and
3ddd9992a5 ("arm64: enable KEXEC_FILE config")].
This patch enables config KEXEC_FILE by default in the
arm64 defconfig, so that user-space tools like kexec-tools
can use the same as the default interface for kexec/kdump
on arm64.
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: kexec@lists.infradead.org
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1586212300-30797-1-git-send-email-bhsharma@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Renesas Gigabit Ethernet Controller on R-Car V3H, as used on the
Condor and V3HSK boards,
- Sony IMX219 and OmniVision OV5645 cameras, as used on the
AISTARVISION MIPI Adapter V2.1,
- Analog Devices ADV7511 HDMI audio, as used on various boards
(Condor, Draak, Eagle, Ebisu, V3HSK, and V3MSK).
All of the above are modular, except for Ethernet support (HDMI Audio
support is an optional feature of the modular ADV7511 driver).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200630171500.11438-1-geert+renesas@glider.be
The IPCC hardware block provides a mechanism for triggering interrupts
between co-processors in recent Qualcomm SoCs. This is used as basis for
most form of communication between co-processors, so enable this
support.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200622222747.717306-7-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The SM8250 pinctrl driver provides pin configuration, pin muxing and
GPIO pin control for many pins on the SM8250 SoC.
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622220048.717073-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
RPMPD provides us the CS/MX power domains needed to boot the modem
subsystem on msm8998 for wifi.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20200528184752.4747-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
- Enable RTC and ADC support of RN5T618 PMIC in imx_v6_v7_defconfig.
- Enable i.MX8DXL pinctrl driver support in arm64 defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7Ij6IUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5peQf+N9PmhSdT/xgWUsudpYBTFGxZ7CP2
mkt86Qxdw5MboaR0Z+L1fsNRYglWU14Hn9GTvPmcoN7VTx6nDJnC55F5xWmP7r1C
ZgI9hH1jZG/jEWJAJmp0sZIBuaZJegUmbD1Pk3dOIMwv/9hEGtj2nI05QuUaTKof
qa8KxSwvYZSd8SKZHDoEl/E6yZZjNIlfMsv6BKTbRfqMHrixZ1y54muNNLKuca3v
hoI4I+AYPy3XhhACjYR3mhSVUF2pCVOpUcFktKdH+ZTLXX/dShMec5vyLwws+CEi
Oldg3J98qkDMnmMXV/1RLvYI/CIR6v7GbsashfinSAeeut6uPz4kgVyhpA==
=kqAi
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.8:
- Enable RTC and ADC support of RN5T618 PMIC in imx_v6_v7_defconfig.
- Enable i.MX8DXL pinctrl driver support in arm64 defconfig.
* tag 'imx-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: extend RN5T618 PMIC family support
arm64: defconfig: Enable CONFIG_PINCTRL_IMX8DXL by default
Link: https://lore.kernel.org/r/20200523032516.11016-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds a watchdog driver that can be used on ARM systems
with the appropriate watchdog implemented in Secure Monitor firmware.
The driver communicates with firmware via a Secure Monitor Call.
This may be useful for platforms using TrustZone that want
the Secure Monitor firmware to have the final control over the watchdog.
This is implemented on mt8173 chromebook devices oak, elm and hana in
arm trusted firmware file plat/mediatek/mt8173/drivers/wdt/wdt.c.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: Xingyu Chen<xingyu.chen@amlogic.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200505131242.v6.2.Ia92bb4d4ce84bcefeba1d00aaa1c1e919b6164ef@changeid
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
- Enable PCI PASID as built-in module and UACCE/SEC2/HPRE as
loadable modules to support UACCE use case for the D06CS board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Oq8w
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-defconfig-for-5.8' of git://github.com/hisilicon/linux-hisi into arm/defconfig
ARM64: hisilicon: defconfig updates for 5.8
- Enable PCI PASID as built-in module and UACCE/SEC2/HPRE as
loadable modules to support UACCE use case for the D06CS board
* tag 'hisi-arm64-defconfig-for-5.8' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable UACCE/PCI PASID/SEC2/HPRE configs
Link: https://lore.kernel.org/r/5EBE4217.6000900@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables SM8250 GCC clock driver, SC7180 GCC clock driver and SC7180
TLMM pinctrl driver, the IPA and RMNET drivers, CCI, camera subsystem
and camera clock drivers and removes the now depricated GLINK_SSR entry.
-----BEGIN PGP SIGNATURE-----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=ukjE
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for v5.8
This enables SM8250 GCC clock driver, SC7180 GCC clock driver and SC7180
TLMM pinctrl driver, the IPA and RMNET drivers, CCI, camera subsystem
and camera clock drivers and removes the now depricated GLINK_SSR entry.
* tag 'qcom-arm64-defconfig-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm IPA and RMNet modules
arm64: defconfig: Enable Qualcomm SC7180 pinctrl and gcc
arm64: defconfig: Remove QCOM_GLINK_SSR
arm64: defconfig: Enable SM8250 GCC driver
arm64: defconfig: Enable Qualcomm CAMCC, CAMSS and CCI drivers
Link: https://lore.kernel.org/r/20200519052502.1249888-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
defconfig to enable the audio codec in sunxi_defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXr7MmQAKCRDj7w1vZxhR
xYFJAQC7OE0ip7aQrJY24AXQgeA1abiQ1+P1oHbHW6E7qnXiGgD9Exd18pO1N1JH
URcmEMjg8plFQn9+gGcHy7VFhE5V8w8=
=ut84
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Two patches to enable the new cpufreq support on the H6 for the arm64
defconfig to enable the audio codec in sunxi_defconfig.
* tag 'sunxi-config-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: configs: Enable sun50i cpufreq nvmem
ARM: configs: sunxi: Add sun8i analog codec
Link: https://lore.kernel.org/r/9fd4d403-f6c8-420d-8b03-62e8485a0b3d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable building the Qualcomm IPA driver as a kernel module. To be
useful, the IPA driver also requires RMNet, so enable building that
as a module as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200518215455.10095-1-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit 06b93644f4 ("media: Kconfig: add an option to filter in/out
platform drivers") adds a new Kconfig symbol which now hides drivers
currently enabled in the arm64 defconfig. Enable it to get those
drivers back.
Link: https://lore.kernel.org/r/20200427134003.45188-5-max.krummenacher@toradex.com
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add DRM_DISPLAY_CONNECTOR. This got introduced with the bridge rework
Which renamed among others DRM_DUMB_VGA_DAC.
Link: https://lore.kernel.org/r/20200427134003.45188-3-max.krummenacher@toradex.com
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove the QCOM_GLINK_SSR option from the arm64 defconfig, as the module
is assimilated by QCOM_GLINK - which is selected by other means.
Acked-by: Chris Lew <clew@codeaurora.org>
Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20200423003736.2027371-5-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the module config for the Amlogic GX audio card.
This module will imply the internal components usually associated
with it to make a functional sound card on these platforms.
Also enable the simple amplifier module which often used on the
output stage of those cards.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20200421163935.775935-2-jbrunet@baylibre.com
Allwinner H6 needs this driver to be able to get
the correct speed_bin required for DVFS.
Enable this option in arm64 defconfig.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Commit c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in
Tegra194") updated the Tegra PCIe Kconfig symbol for building the Tegra
PCIe host controller driver. Following this change the Tegra PCIe host
controller driver is no longer built by default and so no works without
updating the arm64 defconfig. Fix this by updating the Kconfig symbol
in the arm64 for the Tegra PCIe host controller so that again it is
built by default.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
As usual, tons of new drivers and other options got merged and
are now enabled in the defconfig files, usually as loadable modules.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6EaVcACgkQmmx57+YA
GNmYTg/+OBcECrckvyq1LP5x1AnENle1QB4CTKH180TOKXu311IfkOvrDKw3sXlD
VkWyjayTjhv3LRmESJsps03qjYSSHNIOyyspqkTFov/qHZaDBfpDVeqNpnuKstrb
y7DWaNqkYNf1eV6vt2m4khplpnGP52OQLuNC2x8RTRdkDL1i5OfAs1UH3fGq6qsl
dGvfLF6yXKq4Y84Z8jUYGOz4/s1IsKbHK6hvTjocrBCdwqPRJgvLJkwy3X43kWaq
NDFerbLd+ZOYI5siVr5Rd95zt0JSOLkfGDJgpu/KAnotBJxzKmkF4VrKLh00i9NJ
QwpV/ndqImALDLeEKHUe0fDkCk9tbzsC8ApqNuv+M5KJ7C3J7O9UWyZm1tbsZcSJ
NNziz8jSTsp6tOEmLFeLPWdH/i+1j7WljVQaAkqvZuCAgGs24voqUuwvo+6Ulh5b
VLrfoE45VCIBgSch4VACzTdBbxVufO9yZkZZV2mlQEKdXFj1h2KaKZU0Lg9n5LRI
1UFgK+b8Dw2xVZWOxcivcav0GM3CMRd1ZW1ruHlrRcbPhM4JcUUqmmANKW+LmbLo
0+Rh6ZXywH8FtQVDq9DMsVqZxpmPbJF5gPw3T145mgEb32ogwLi7M5fcNkqm8KZR
KyZseaIg2iMnY25vTZmnQlafcyrTXix1OfD/gC06CaW9eMCueSM=
=NkVs
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"As usual, tons of new drivers and other options got merged and are now
enabled in the defconfig files, usually as loadable modules"
* tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
ARM: omap2plus_defconfig: Update for moved and dropped options
ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable zram as loadable modules
ARM: omap2plus_defconfig: Enable simple-pm-bus
arm64: defconfig: Enable Qualcomm SDM845 audio configs
arm64: defconfig: Enable e1000 device
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable QorIQ DPAA1 drivers
...
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- Various NUMA scheduling updates: harmonize the load-balancer and
NUMA placement logic to not work against each other. The intended
result is better locality, better utilization and fewer migrations.
- Introduce Thermal Pressure tracking and optimizations, to improve
task placement on thermally overloaded systems.
- Implement frequency invariant scheduler accounting on (some) x86
CPUs. This is done by observing and sampling the 'recent' CPU
frequency average at ~tick boundaries. The CPU provides this data
via the APERF/MPERF MSRs. This hopefully makes our capacity
estimates more precise and keeps tasks on the same CPU better even
if it might seem overloaded at a lower momentary frequency. (As
usual, turbo mode is a complication that we resolve by observing
the maximum frequency and renormalizing to it.)
- Add asymmetric CPU capacity wakeup scan to improve capacity
utilization on asymmetric topologies. (big.LITTLE systems)
- PSI fixes and optimizations.
- RT scheduling capacity awareness fixes & improvements.
- Optimize the CONFIG_RT_GROUP_SCHED constraints code.
- Misc fixes, cleanups and optimizations - see the changelog for
details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
threads: Update PID limit comment according to futex UAPI change
sched/fair: Fix condition of avg_load calculation
sched/rt: cpupri_find: Trigger a full search as fallback
kthread: Do not preempt current task if it is going to call schedule()
sched/fair: Improve spreading of utilization
sched: Avoid scale real weight down to zero
psi: Move PF_MEMSTALL out of task->flags
MAINTAINERS: Add maintenance information for psi
psi: Optimize switching tasks inside shared cgroups
psi: Fix cpu.pressure for cpu.max and competing cgroups
sched/core: Distribute tasks within affinity masks
sched/fair: Fix enqueue_task_fair warning
thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code
sched/rt: Remove unnecessary push for unfit tasks
sched/rt: Allow pulling unfitting task
sched/rt: Optimize cpupri_find() on non-heterogenous systems
sched/rt: Re-instate old behavior in select_task_rq_rt()
sched/rt: cpupri_find: Implement fallback mechanism for !fit case
sched/fair: Fix reordering of enqueue/dequeue_task_fair()
sched/fair: Fix runnable_avg for throttled cfs
...
Enable TI K3 AM654x/J721E DMA and networking options.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- A seris from Li Yang to make defconfig useful for NXP LS family SoCs.
Most drivers are built as module there, but those helping boot system
with NFS are enabled built-in.
- Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in
defconfig.
- Enable i.MX DRM driver support for multi_v7_defconfig.
- Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl5xnT0UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7/cwf/W3mjSLA4MhY8brUydqYYlPTPDhZT
ZNvQLG8/dfeCnfuTF9Z8kXTkEXI+CgyzzLwWvRSxPDIvCcxFV38yjWEWodMWSMPc
gTPMHkRRCu63VuE0suwDSDsaPn4/g3s5E51kFzSoEnSSy0n+fVmXJosVoB9bEDNF
o15R3qT7leFwoR+bAB+h7X8EloPCC7QzZKpKZfNlIFfDd6aMObo1++HY+FqeNy7S
88lD+JdW2yyoj9r9Qkx3k/c3Hh+1uMysIM8FsVqeYSPGSrN8eK+wA5CqtHQ3TF8/
jcB7LdH0US8qL3oSnweCuT3Pb6zRtQwrsnpMZVR7Urue6Thq9i08jVuvUw==
=5yPc
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/config
i.MX defconfig changes for 5.7:
- A seris from Li Yang to make defconfig useful for NXP LS family SoCs.
Most drivers are built as module there, but those helping boot system
with NFS are enabled built-in.
- Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in
defconfig.
- Enable i.MX DRM driver support for multi_v7_defconfig.
- Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
arm64: defconfig: Enable e1000 device
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable QorIQ DPAA1 drivers
arm64: defconfig: Enable NXP flexcan driver
arm64: defconfig: run through savedefconfig for ordering
arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module
arm64: defconfig: add i.MX system controller thermal support
ARM: multi_v7_defconfig: enable drm imx support
arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4
ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_AD7879
...
Link: https://lore.kernel.org/r/20200318051918.32579-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable SDM845 audio, display and gpu related configs and the Truly
NT35597 panel driver, all relevant for various SDM845 based boards.
Enable IPQ6018 clocks and pinctrl and the pmic vibrator driver for
PM8916.
-----BEGIN PGP SIGNATURE-----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=GDt8
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/config
Qualcomm ARM64 defconfig updates for v5.7
Enable SDM845 audio, display and gpu related configs and the Truly
NT35597 panel driver, all relevant for various SDM845 based boards.
Enable IPQ6018 clocks and pinctrl and the pmic vibrator driver for
PM8916.
* tag 'qcom-arm64-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SDM845 audio configs
arm64: defconfig: Enable Truly NT35597 WQXGA panel
arm64: defconfig: Enable Qualcomm SDM845 display and gpu clocks
arm64: defconfig: Enable qcom ipq6018 clock and pinctrl
arm64: defconfig: Enable Qualcomm PM8XXX vibrator support
Link: https://lore.kernel.org/r/20200318043856.GB470201@yoga
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable MEGARAID_SAS to be able to boot from
disk for the D06CS development board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJeYL3BAAoJEAvIV27ZiWZcso8P/0QtYy0Faf1+nKKJaGg5QhPH
37PJvsCsoqhVIF30OUnprv3dt8Y7y3XmoEP8raXp4mWQctukjIl2AFlUfqw4ci3x
Dy8IYKR9GhqBF/+ITVSZPivnsNrs+DgRPEUqCeaEXe9pjGafuyDl0zrD0rEhXLLz
c5m6jG4u42lC4AS1IlHajNwECKGAPsaE1eCEl1ZEIhBE/vRKaWVlxoK1hasCxRZj
L2RtHWtni1ToQ8K2BzIJ06zp23Hq1fDUx6DJ9xDvJsrd7BWFlkOZArEEKRyFdyku
wENIOSyEbo98zDZ6xcHf17zCpnnUXJF7hbNsAGyBYLmfZIMfSl8yJB7ICwKxmLwh
oBQQOoZYfyXwcNVUrxTS7E0iNeUAYNw0S10W4ILsrS7KFBvt4bMIgP/DLuWa0YYz
/KUIWNapQg83d1qVBtHddHkv42HwgEIdmiOkmNi1qtNcD8YZSHVxNKq/x1HUpyR6
nCTrMFgAMZtTwZFVBz5VVe4JOFZQnta+FuAz9z/E120n/EHjBF5XAkunZZnViuy9
XU2DoVHTM/meJQtP9bOFTSoNeiT6jOxBpDkjQFu3rHVDHRw4vrR2fjIChtuws7HJ
i/3C1HXycyKRva61sy6LNliIgff63n/1QvNsadHU17nthLMm4BbkMyeq/ktTWD9l
AczotXpDZ/LaryQN1HgC
=+dLX
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-defconfig-for-5.7' of git://github.com/hisilicon/linux-hisi into arm/config
ARM64: hisilicon: defconfig updates for 5.7
- Enable MEGARAID_SAS to be able to boot from
disk for the D06CS development board
* tag 'hisi-arm64-defconfig-for-5.7' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable MEGARAID_SAS
Link: https://lore.kernel.org/r/5E61F3C1.1080909@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable soundwire, slimbus frameworks, the machine driver and the codec
drivers for WCD934x and WSA881x used on varios SDM845 based designs.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200315050827.1575421-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enables e1000 Ethernet device as it is used as a low-cost failover
Ethernet port on various QorIQ reference boards. Enabled as built-in
for booting from network without initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables various PHY device drivers and PHY MUX drivers used on QorIQ
reference boards supported in mainline kernel.
Enabled as built-in to boot from network without an initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables the RTC devices used on QorIQ reference boards supported in
mainline kernel.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the flash devices used on NXP/FSL QorIQ reference boards
supported in mainline kernel. Drivers are enabled as built-in for RFS
access without initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables the Mali display driver for the display port on NXP LS1028a SoC.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables generic GPIO driver for varous QorIQ SoCs. The driver can only
be built-in right now.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables NXP/FSL QorIQ IFC flash controller driver for NAND. Enabled as
built-in to load RFS from nand flash without initramfs.
Remove CONFIG_MEMORY as it is selected by CONFIG_MTD_NAND_FSL_IFC.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables ARM generic SBSA compatible watchdog driver for NXP LX2160a SoC.
Enabled as built-in for it is a core feature.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables the generic QorIQ cpufreq driver to support frequency scaling
for various QorIQ SoCs. Enabled as built-in as it is a core feature.
Remove CONFIG_CLK_QORIQ as it is seleted by CONFIG_QORIQ_CPUFREQ.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables SPI controller drivers used in various NXP/FSL SoCs.
QSPI is fast enough to connect big flash for file system. It is used to
connect 512MB NAND flash and 256MB NOR flash on LS1028RDB. It is used
as bootsource for other platforms like LS2080ardb too. Enabled as
built-in to load RFS from SPI flash without requiring initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables drivers for NXP ENETC Ethernet controller and FELIX Ethernet
switch used on QorIQ LS1028a SoC.
The ENETC ethernet drivers are enabled as built-in to boot from network
without an initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables drivers for NXP DPAA2 framework, related Ethernet and crypto
device which can be found on QorIQ SoCs like LS1088a, LS2088a and
LX2160a.
The framework and ethernet drivers are enabled as built-in to boot
from network without an initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables drivers for NXP DPAA1 framework and related Ethernet device which
can be found on QorIQ SoCs such as LS1043a and LS1046a. They are enabled
as built-in to boot from network without an initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables driver for FLEXCAN device which is used on a wide range of NXP
SoCs. Also enabling the related CAN framework.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Used "make defconfig savedefconfig" to regenerate defconfig files in the
right order to prepare for additional defconfig changes.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The (CFS) scheduler has some extra logic catering to systems with SMT, but
that logic won't be compiled in unless the above config is set.
Note that the SMT-centric codepaths are gated by the sched_smt_present
static key, and the SMT sched_domains will only survive if the platform has
SMT. As such, the only impact on !SMT platforms should be a slightly
bigger kernel - no behavioural change.
Distro kernels already enable it, which makes sense since there already are
things like ThunderX2 out in the wild. Enable it for the defconfig.
Some deltas
===========
FWIW my ELF symbol table diff looks something like this:
NAME BEFORE AFTER DELTA
update_sd_lb_stats.constprop.135 0 1864 +1864
find_idlest_group.isra.115 0 1808 +1808
update_numa_stats.isra.121 0 628 +628
select_task_rq_fair 3236 3732 +496
compute_energy.isra.112 0 420 +420
score_nearby_nodes.part.120 0 380 +380
__update_idle_core 0 232 +232
nohz_balance_exit_idle.part.127 0 216 +216
sched_slice.isra.99 0 172 +172
update_load_avg.part.107 0 116 +116
wakeup_preempt_entity.isra.101 0 92 +92
sched_cpu_activate 340 396 +56
pick_next_task_idle 8 56 +48
sched_cpu_deactivate 252 292 +40
show_smt_active 44 80 +36
cpu_smt_mask 0 28 +28
set_next_task_idle 4 32 +28
task_numa_work 680 692 +12
cpu_smt_flags 0 8 +8
enqueue_task_fair 2608 2612 +4
wakeup_preempt_entity.isra.104 92 0 -92
update_load_avg 1028 932 -96
task_numa_migrate 1824 1728 -96
sched_slice.isra.102 172 0 -172
nohz_balance_exit_idle.part.130 216 0 -216
task_numa_find_cpu 2116 1868 -248
score_nearby_nodes.part.123 380 0 -380
compute_energy.isra.115 420 0 -420
update_numa_stats.isra.124 472 0 -472
find_idlest_group.isra.118 1808 0 -1808
update_sd_lb_stats.constprop.138 1864 0 -1864
------------------------------------------------------------------
DELTA SUM +820
As for the sched_domains, this is on a hikey960:
before:
$ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name | sort | uniq
DIE
MC
after:
$ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name | sort | uniq
DIE
MC
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200227191433.31994-3-valentin.schneider@arm.com
Our new dev board (Huawei D06CS) has a MegaRAID SAS HBA as the storage
controller, and we cannot access the HiSilicon SAS HBA, which we normally
use; so enable the driver config option so we can boot a distro with the
default defconfig.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
- Restore R-Car M3-W support,
- Drop deprecated compatible value to ease DT binding conversion to
json-schema.
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXlY78AAKCRCKwlD9ZEnx
cAR9APdKGcY7roK82m1uLIsCohHOdwikY4qvR+cVniRKgwspAP9Q3NNCXhelEEed
S2JMLficspDnR+BuWR3gyg173Z74CQ==
=P/qq
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas Fixes for v5.6
- Restore R-Car M3-W support,
- Drop deprecated compatible value to ease DT binding conversion to
json-schema.
* tag 'renesas-fixes-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value
arm64: defconfig: Replace ARCH_R8A7796 by ARCH_R8A77960
Link: https://lore.kernel.org/r/20200226105236.18368-1-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the drivers for the display and gpu clock controllers on Qualcomm
SDM845, needed in order to get these features working. These drivers
provides power-domains and can as such not be compiled as modules.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191109024234.1757452-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The pm8xxx-vibrator driver controls the vibrator motor driver
available in the Qualcomm PM8916 PMIC.
Build the driver as module so it can be loaded when necessary.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable CONFIG_PINCTRL_IMX8MP by default to support i.MX8MP
pinctrl driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
the following:
- Nicolas enables the BCM2835 DMA engine controller as built-in since
the bcm2835 SD host controller depends on the DMA engine to be
available.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl5A4jIACgkQh9CWnEQH
BwSiXRAAn8P2xYk0way0VGGBDNNCbm7k9Y63RQBu4XImn1bD3DiJsujjn5Kzs1tu
5JVPkWabrSykngXVxzPN2C9UpW08AnfLqSz1Z3+01EIHYXPrmPLUhFxbvIwxNZu3
gH06puSx+Xk3OORdPgZyjjI82RAEnwmiAm7xxZIwsO9NB39dRcy0SVwd6ovhkvl7
UV4k1Mj6WsGCPD7I6r3P1S9wEWE9lt7cIWyTI9rPm5DJCl6LesY81eyGCrF1fFMn
amiXj+WKU04q4PfT8AJpx1p+VdX1q1655PrHtp0qmt4QMSOQ6GfcEPXPnR4VqWX2
5oKvvokGQrPSWNBQcqTi/I2bXEyxQzZKkN5nhhbjL0OSzefqD1eQq19ktz/osN9H
lfLUN3FxiBh2jUkcjpL9/hKi2qnPxhcWWb+fB8mCvEldfTlk7N2OGjgkj+me3nOd
dz1tipKrG4iB6J5MKjVSn56SfJRlPmEY9DgABV4ckLCe+e8i//+Nfz+v9qDdE5Kw
5M6dOzUsLmfJL4lnE0fCN342cVrUZ5aqX4F4W+Xd9b+Fm6W/Oyv7VD2qmhY3w7qO
MvlkCDY231lDFOd7izixiga9rzkrkQ5Bk6SxySlN47XcHBSo8LHA5iV7aty1X0Z+
jNhIhRkM5arkOmh5AIMjbGUFSEaGswAF0xh/M4t7c1HFijxBTI0=
=8I22
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.6/defconfig-arm64-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains ARM64 defconfig changes for v5.6, please pull
the following:
- Nicolas enables the BCM2835 DMA engine controller as built-in since
the bcm2835 SD host controller depends on the DMA engine to be
available.
* tag 'arm-soc/for-5.6/defconfig-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Set bcm2835-dma as built-in
Link: https://lore.kernel.org/r/20200210145621.22599-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Now, Allwiner MIPI-DSI support is available for ARM64
Allwinner SoC like A64. So, let's build it as a module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Many sunxi based board needs CONFIG_SUN8I_THERMAL for thermal support.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
With the introduction of 738987a1d6 ("mmc: bcm2835: Use
dma_request_chan() instead dma_request_slave_channel()") sdhost-bcm2835
now waits for its DMA channel to be available when defined in the
device-tree (it would previously default to PIO). Albeit the right
behaviour, the MMC host is needed for booting. So this makes sure the
DMA channel shows up in time.
Fixes: 738987a1d6 ("mmc: bcm2835: Use dma_request_chan() instead dma_request_slave_channel()")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=8F5r
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
arm64: defconfig: Enable Broadcom's GENET Ethernet controller
ARM: multi_v7_defconfig: Enable devfreq thermal integration
ARM: exynos_defconfig: Enable devfreq thermal integration
ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2
ARM: exynos_defconfig: Enable NFS v4.1 and v4.2
arm64: defconfig: Enable Actions Semi specific drivers
arm64: defconfig: Enable Broadcom's STB PCIe controller
arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default
ARM: configs: at91: enable config flags for sam9x60 SoC
ARM: configs: at91: use savedefconfig
arm64: defconfig: Enable tegra XUDC support
ARM: defconfig: gemini: Update defconfig
arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
arm64: defconfig: enable CONFIG_QCOM_CPR
arm64: defconfig: Enable HFPLL
arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM
ARM: imx_v6_v7_defconfig: Select the TFP410 driver
ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support
arm64: defconfig: Enable ATH10K_SNOC
...
This builds the BCM2711 thermal driver as module for the Raspberry Pi 4.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1578941778-23321-5-git-send-email-stefan.wahren@i2se.com
for 5.6, please pull the following:
- Nicolas enables the Broadcom GENET controller and Broadcom STB PCIe
Root Complex driver as a module for the ARM64 defconfig. The PCIe RC
driver will go through the PCIe maintainers pull request for 5.6.
-----BEGIN PGP SIGNATURE-----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=UsZS
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.6/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig changes
for 5.6, please pull the following:
- Nicolas enables the Broadcom GENET controller and Broadcom STB PCIe
Root Complex driver as a module for the ARM64 defconfig. The PCIe RC
driver will go through the PCIe maintainers pull request for 5.6.
* tag 'arm-soc/for-5.6/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable Broadcom's GENET Ethernet controller
arm64: defconfig: Enable Broadcom's STB PCIe controller
Link: https://lore.kernel.org/r/20200117222705.25391-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Currently used on the Raspberry Pi 4 and various Broadcom STB SoCs.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- Enable i.MX8MP clock driver in arm64 defconfig.
- Enable Crypto CAAM driver support as module in arm64 defconfig.
- Enable ILI210X touch driver, USB CDC ACM function, NFS_V4 support and
TFP410 DVI bridge driver support in arm32 imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl4b4oUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7iqQgAm/j9aO61exErck4aI9+krqrLnF3w
eWgrrovPEwSARQo69bTAGK5GYjaZ4yGlDiH3Qk6TS5pvcRsEjaxsu/Ym/KVDtOBM
iiLD9MbI7w8Nd5pe4jBkCHF6ZOEWbMvzwc8zStM/RwTVvwajdkW/p1If4RQGEqmM
ZcMgXLcQneqWAbCsFDziAwsf6kfOhOghW3CNQ63GuGZc4UFRv8j056mBlG8PDeLL
4UbT+rI1xwwatNg9a2/E0HfA3Z4eJg1YbjMTrEx4NDkDel2Sz9GuVxJIY1+/lDKs
DCw4n1Fzfn4nxR8Eak7foQPY27VLgDqa6zM06QYhQXE3wWt2HumxJNQkmQ==
=H+6R
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.6:
- Enable i.MX8MP clock driver in arm64 defconfig.
- Enable Crypto CAAM driver support as module in arm64 defconfig.
- Enable ILI210X touch driver, USB CDC ACM function, NFS_V4 support and
TFP410 DVI bridge driver support in arm32 imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default
arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM
ARM: imx_v6_v7_defconfig: Select the TFP410 driver
ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support
ARM: configs: imx_v6_v7_defconfig: enable USB ACM
ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_ILI210X
Link: https://lore.kernel.org/r/20200113034006.17430-6-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables the USB GPIO connector and Tegra XUDC drivers in the
default configuration.
-----BEGIN PGP SIGNATURE-----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=RP5m
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.6-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration updates for v5.6-rc1
This enables the USB GPIO connector and Tegra XUDC drivers in the
default configuration.
* tag 'tegra-for-5.6-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable tegra XUDC support
Link: https://lore.kernel.org/r/20200111005526.2413959-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
For now mainly used in the Raspberry Pi 4.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Select CONFIG_CLK_IMX8MP by default to support i.MX8MP clock driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The high frequency pll is required on compatible Qualcomm SoCs to
support the CPU frequency scaling feature.
Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191125142511.681149-6-niklas.cassel@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Both the i.MX8MQ and i.MX8M Mini support the CAAM driver, but it
is currently not enabled by default.
This patch enables this as a module.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ath10k snoc is found on the Qualcomm QCS404 and SDM845, so enable
the driver for this.
Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191028171837.3907550-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable PDC interrupt controller for SDM845 devices. The interrupt
controller can detect wakeup capable interrupts when the SoC is in a low
power state.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573855915-9841-13-git-send-email-ilina@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the driver for the watchdog found in the application processor
subsystem on most modern Qualcomm platforms.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Most Qualcomm platforms contain a pseudo random number generator
hardware block. Enable the driver for this block and also enable the
interface for exposing this to userspace.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This enables display on the Lenovo Yoga C630 by connecting the DSI output
from the SoC to the eDP input of the panel.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This enables Bluetooth on the Lenovo Yoga C630.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm CPUfreq HW provides CPU voltage and frequency scaling on
many modern Qualcomm SoCs. Enable the driver for this hardware block to
enable this functionality on the SDM845 platform.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm socinfo driver provides SoC information to userspace using
the standard soc interface as well as a number of debugfs entries.
Enable this to allow certain user space tools to acquire this
information, as well as getting developers access to the information in
debugfs that is useful when reporting bugs.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the drivers for GENI SPI and QSPI controllers found on the
Qualcomm SDM845 platform, among others.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the the power domains, reset controllers and remote block device
memory access drivers necessary to boot the Audio, Compute and Modem
DSPs on Qualcomm SDM845.
None of the power domains are system critical, but needs to be builtin
as the driver core prohibits probe deferal past late initcall.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Alex Elder <elder@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.
Link: https://lore.kernel.org/r/20191205211438.27552-3-olof@lixom.net
Signed-off-by: Olof Johansson <olof@lixom.net>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=rTWJ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: shmobile: defconfig: Refresh for v5.4-rc1
arm64: defconfig: Enable R8A77961 SoC
ARM: configs: sunxi: Enable MICREL_PHY
arm64: defconfig: add new Allwinner crypto options
ARM: configs: sunxi: add new Allwinner crypto options
ARM: tegra: Enable Tegra VDE driver in tegra_defconfig
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
arm64: defconfig: enable Altera GPIO controller
ARM: multi_v7_defconfig: Enable audio support for stm32mp157
arm64: defconfig: enable rsu driver
...
The recently introduced Energy Model (EM) framework manages power cost
tables for the CPUs of the system. Its only user right now is the
scheduler, in the context of Energy Aware Scheduling (EAS).
However, the EM framework also offers a generic infrastructure that
could replace subsystem-specific implementations of the same concepts,
as this is the case in the thermal framework.
So, in order to prepare the migration of the thermal subsystem to use
the EM framework, enable it in the default arm64 defconfig, which is the
most commonly used architecture for IPA. This will also compile-in all
of the EAS code, although it won't be enabled by default -- EAS requires
to use the 'schedutil' CPUFreq governor while arm64 defaults to
'performance'.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191030151451.7961-2-qperret@google.com
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdwYuhAAoJEFBXWFqHsHzO+tcH/RmEkt5uueRqM++I56F7Kmc9
80I2pMUbCXln2rjWXEP29OE1h4pKtimfwtEoQvtRX8DOhCFT+CCxsj9JqMZAEnxp
WrCC6GbNAYG+Geje6HAVy7mr2mFD4KXwcc/TLjV2fk3MpuEcsYLuEL/t+wqnKw/W
IabyG0v/CZfp1fkX5FIkpmI770WzOs5kzfIGTnJ9GEJtj/omZYPXK605GSDSWovJ
XX2iI2wFmLy8/KO9enhGQjSzZQyOZce/cyqCG4YGdWSHQzJE9zBP207EHZqEB21b
g+5VzYbM75WmAt0TL+2K3ZzuOKVKZeDpY6KQTz02rTfIRZ4sieY6l9+i/ECtAgY=
=w4CK
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.5:
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
* tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernel
ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default
Link: https://lore.kernel.org/r/20191105150315.15477-7-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
will be reset. Without CONFIG_AT803X_PHY as y, board will stop
booting in NFS DHCP, because phy is not ready. So mark
CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Enable support for the new R-Car M3-W+ (r8a77961) SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXbxC8QAKCRCKwlD9ZEnx
cEbwAP0QFuUSw6DqGAW7KAXw9hw9wyflLV980BiAhLithcUc+gD9FfWapC+c4Bga
1uiVND6X3kqUxHUcbc27P7xvziOYPgQ=
=CPFd
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM64 defconfig updates for v5.5 (take two)
- Enable support for the new R-Car M3-W+ (r8a77961) SoC.
* tag 'renesas-arm64-defconfig-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A77961 SoC
Link: https://lore.kernel.org/r/20191101155842.31467-4-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- enable ARM SMMUv3 PMU and hisi ZIP controller as module for
Kunpeng920 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=h4j2
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-defconfig-for-5.5' of git://github.com/hisilicon/linux-hisi into arm/defconfig
ARM64: hisilicon: defconfig updates for 5.5
- enable ARM SMMUv3 PMU and hisi ZIP controller as module for
Kunpeng920 SoC
* tag 'hisi-arm64-defconfig-for-5.5' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
Link: https://lore.kernel.org/r/5DB95B1E.8060607@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add SPI_CADENCE_QUADSPI to support the Cadence QSPI driver
- Add INTEL_STRATIX10_RSU as a module to support the Remote Service
Update driver on Stratix10 and Agilex platforms
- Add GPIO_ALTERA as a module to support the Altera GPIO driver
-----BEGIN PGP SIGNATURE-----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=mZHb
-----END PGP SIGNATURE-----
Merge tag 'arm64_defconfig_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/defconfig
arm64 defconfig for v5.5
- Add SPI_CADENCE_QUADSPI to support the Cadence QSPI driver
- Add INTEL_STRATIX10_RSU as a module to support the Remote Service
Update driver on Stratix10 and Agilex platforms
- Add GPIO_ALTERA as a module to support the Altera GPIO driver
* tag 'arm64_defconfig_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: defconfig: enable Altera GPIO controller
arm64: defconfig: enable rsu driver
arm64: defconfig: enable the Cadence QSPI controller
Link: https://lore.kernel.org/r/20191029143737.24850-2-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds the new allwinner crypto configs to ARM64 defconfig
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Select CONFIG_KEYBOARD_IMX_SC_KEY as module by default to
support i.MX8QXP scu key driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
HiSilicon Kunpeng920 SoC's SMMU has Performance Monitor Counter Groups(PMCG).
This patch enables related driver in defconfig.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable CONFIG_CRYPTO_DEV_HISI_ZIP for HiSilicon ZIP controller in Kunpeng920
SoC.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable Intel Stratix10 Remote System Update (RSU) driver
The Intel Remote System Update (RSU) driver provides a way for customers
to update the boot configuration of a Intel Stratix 10 SoC device with
significantly reduced risk of corrupting the bitstream storage and
bricking the system.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
- Enable support for the new RZ/G2N (r8a774b1) SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXal+LwAKCRCKwlD9ZEnx
cBOWAQCxnwQPhFyyuJDpNQMg7P3/mPXoX7Pis5B4VGaAtNFaJQD/WhsTJJ/SPtZQ
IfadPuQOobigRXq69TVpuV/4UYq+aQ4=
=XV8+
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM64 defconfig updates for v5.5
- Enable support for the new RZ/G2N (r8a774b1) SoC.
* tag 'renesas-arm64-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A774B1 SoC
Link: https://lore.kernel.org/r/20191018101136.26350-3-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Since there are enough consumers (drivers) for Actions Semi platform in
mainline, let's enable it in ARM64 defconfig. As of now, this platform
can boot a distro from eMMC/uSD.
Link: https://lore.kernel.org/r/20191015152204.5610-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 6334150e9a ("remoteproc: don't allow modular build")
changes CONFIG_REMOTEPROC to a boolean from a tristate config
option which inhibits all defconfigs marking CONFIG_REMOTEPROC as
a module in compiling the remoteproc and dependent config options.
So fix the configs to have CONFIG_REMOTEPROC built in.
Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com
Fixes: 6334150e9a ("remoteproc: don't allow modular build")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Will Deacon <will@kernel.org>
[olof: Fixed up all 4 occurrances in this one commit]
Signed-off-by: Olof Johansson <olof@lixom.net>
Tested on the Lenovo Yoga C630 where this patch enables USB.
Without it USB devices are not enumerated.
Link: https://lore.kernel.org/r/20190903192625.14775-3-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested on the Lenovo Yoga C630 where this patch enables the
framebuffer (screen/monitor). Without it the device appears
not to boot.
Link: https://lore.kernel.org/r/20190903192625.14775-2-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested on the Lenovo Yoga C630 where this patch enables the
keyboard, touchpad and touchscreen.
Link: https://lore.kernel.org/r/20190903192625.14775-1-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in the ARM64 defconfig file
-----BEGIN PGP SIGNATURE-----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=brp0
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.4/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig updates
for 5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in the ARM64 defconfig file
* tag 'arm-soc/for-5.4/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: enable cpufreq support for RPi3
- Enable pinctrl and clock driver support for i.MX8MN SoC.
- Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including
FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support
SDMA firmware loading via udev.
- Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver.
- Enable module build of OV5645 camera driver in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYqWeAAoJEFBXWFqHsHzO8h8H+wTFJx+q4CF7Z8l+3OCR5rNQ
RSC3gaiYLhQUCEx+HVnvzDvhovdJNyoHiT6qdYqHIO5BYMmacsuWYwuZveaSePCl
WYZ0XkIuvMDZu4KFkl3ufEZx73u/7hbY1s4PevWm7KDeHY28XyWfflX0aW2yM/2Q
1Q/bNjMnsFGJPItBModiwS9lNjxMl7K9XBU47m0K/sJV4LFxbl+2OmfmaQYn4Ook
PAa4XbRH3d/Ff+jXrbwSy+AZZfpsiwDPV6cEwaAOTGr0O6+jKGRzqyAYNTANwjfU
ihUhy/XBjX2GRmGVxqTthDgktoSfX9eVQFU4WfDiHjRYO3y6vpBccC1ixpawUEM=
=iYpD
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.4:
- Enable pinctrl and clock driver support for i.MX8MN SoC.
- Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including
FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support
SDMA firmware loading via udev.
- Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver.
- Enable module build of OV5645 camera driver in imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: CONFIG_DRM_ETNAVIV=m
ARM: imx_v6_v7_defconfig: Select the OV5645 camera driver
arm64: defconfig: Build imx8 ddr pmu as module
arm64: defconfig: Select CONFIG_CLK_IMX8MN by default
arm64: defconfig: Select CONFIG_PINCTRL_IMX8MN by default
arm64: defconfig: Enable SDMA on i.mx8mq/8mm
Link: https://lore.kernel.org/r/20190825153237.28829-7-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two patches to enable the IR receiver and the SPDIF transceiver found on
the Allwinner SoCs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXV/4nQAKCRDj7w1vZxhR
xdi9AQC1om2jja54gplSpDKxYzPsAphLlmSNzKKQ5+mzjj1J3gD/VNdkUyw/V2Pk
g/DAuPRgpZWS1ab82Lr08z6RDeFynwk=
=R83T
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Allwinner arm64 defconfig changes for 5.4
Two patches to enable the IR receiver and the SPDIF transceiver found on
the Allwinner SoCs.
* tag 'sunxi-config64-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable Sun4i SPDIF module
arm64: defconfig: Enable IR SUNXI option
Link: https://lore.kernel.org/r/24f215ca-f3a8-4497-bf98-9ba1808b37be.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 used to be enabled by default in
drivers/clk/qcom/Kconfig. A recent patch changed that by dropping the
'default ARCH_QCOM' directive.
Add the two options explicitly in the arm64 defconfig, to avoid
functional regressions.
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
[bjorn: Rewrote subject]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all
ARCH_QCOM enabled defconfigs to restore the previous expected build
behavior.
I split this off from the original patch to separate out the ARM64 portions.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Enable GCC config CONFIG_SM_GCC_8150 and pinctrl config
CONFIG_PINCTRL_SM8150 to make it possible to boot the SM8150 MTP.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the ACPI_APEI_PCIEAER configuration to support PCIe AER error report
for the Hisilicon D06 board and the dependencies PCIEAER and ACPI_APEI have
been enabled in the default config.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable the PSCI CPUidle driver to replace the functionality
previously provided by the generic ARM CPUidle driver through
CPU operations.
Link: https://lore.kernel.org/r/20190814125239.6270-2-lorenzo.pieralisi@arm.com
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner A64 and H6 use the Sun4i SPDIF driver.
Enable this to allow a proper support.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
For imx8 we want to enable etnaviv, let's enable it
in defconfig, it will be useful to have it enabled for KernelCI
boot and runtime testing.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_IR_SUNXI option for ARM64, so that Allwinner A64/H6 SoCs
can use their IR receiver controller.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This enables both the new firmware clock driver and cpufreq driver
available for the RPi3 family of boards.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
This is available on all imx8 but is not "boot critical" in any way so
build as a module.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable SDMA support on i.mx8mq/8mm chips, including enabling
CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK
for firmware loaded by udev.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=Ysfd
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: configs: multi_v5: Remove duplicate ASPEED options
arm64: defconfig: Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module
ARM: imx_v6_v7_defconfig: Enable CONFIG_ARM_IMX_CPUFREQ_DT
defconfig: arm64: enable i.MX8 SCU octop driver
arm64: defconfig: Add i.MX SCU SoC info driver
arm64: defconfig: Enable CONFIG_QORIQ_THERMAL
ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_SNVS_LPGPR
arm64: defconfig: ARM_IMX_CPUFREQ_DT=m
ARM: imx_v6_v7_defconfig: Add TPM PWM support by default
ARM: imx_v6_v7_defconfig: Enable the OV2680 camera driver
ARM: imx_v6_v7_defconfig: Enable CONFIG_THERMAL_STATISTICS
arm64: defconfig: NVMEM_IMX_OCOTP=y for imx8m
ARM: multi_v7_defconfig: enable STMFX pinctrl support
arm64 defconfig: enable LVM support
ARM: configs: multi_v5: Add more ASPEED devices
arm64: defconfig: Add Tegra194 PCIe driver
ARM: configs: aspeed: Add new drivers
ARM: exynos_defconfig: Enable Panfrost and Lima drivers
ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers
arm64 defconfig: enable Mellanox cards
...
We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM Mali
GPU devices added to device trees, since the DRM drivers have now been
merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Polish and fixes for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now at
feature parity with TX1
-----BEGIN PGP SIGNATURE-----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=sHZs
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Devicetree updates from Olof Johansson:
"We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM
Mali GPU devices added to device trees, since the DRM drivers have now
been merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Fixes and polish for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now
at feature parity with TX1"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits)
ARM: dts: gemini: Set DIR-685 SPI CS as active low
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family
ARM: dts: exynos: Move Mali400 GPU node to "/soc"
ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210
arm64: dts: qcom: qcs404: Add missing space for cooling-cells property
arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire
arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs
arm64: dts: rockchip: enable rk3328 watchdog clock
ARM: dts: rockchip: add display nodes for rk322x
ARM: dts: rockchip: fix vop iommu-cells on rk322x
arm64: dts: rockchip: Add support for Hugsun X99 TV Box
arm64: dts: rockchip: Define values for the IPA governor for rock960
arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi
arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs
arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.
Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"
ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
arm64: dts: qcom: sdm845-cheza: add initial cheza dt
ARM: dts: msm8974-FP2: Add vibration motor
...
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
-----BEGIN PGP SIGNATURE-----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=0TDT
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
XAFLAG and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
'arm_boot_flags' introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
perf: arm_spe: Enable ACPI/Platform automatic module loading
arm_pmu: acpi: spe: Add initial MADT/SPE probing
ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
ACPI/PPTT: Modify node flag detection to find last IDENTICAL
x86/entry: Simplify _TIF_SYSCALL_EMU handling
arm64: rename dump_instr as dump_kernel_instr
arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
arm64: Implement panic_smp_self_stop()
arm64: Improve parking of stopped CPUs
arm64: Expose FRINT capabilities to userspace
arm64: Expose ARMv8.5 CondM capability to userspace
arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
arm64: ARM64_MODULES_PLTS must depend on MODULES
arm64: bpf: do not allocate executable memory
arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
arm64: module: create module allocations without exec permissions
arm64: Allow user selection of ARM64_MODULE_PLTS
acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
arm64: Allow selecting Pseudo-NMI again
...
some missing drivers for the Allwinner A64.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyRtgAKCRDj7w1vZxhR
xYEkAQDDG93lpzjFJBx9bs62SDRD6CRWFgQFbB3Nhp3u7xeCXwD/d1A89oINxhx8
Fw+Iwzzdix1/wrCGZUohZ2ryQCGyYwo=
=eg7B
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.3-201906210813' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Our usual bunch of arm64 defconfig changes, this time mostly to enable
some missing drivers for the Allwinner A64.
* tag 'sunxi-config64-for-5.3-201906210813' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: enable Allwinner DMA drivers
arm64: defconfig: enable sunxi watchdog
arm64: defconfig: add allwinner sid support
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module to support i.MX8M
series SoCs' power key.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch selects CONFIG_IMX_SCU_SOC by default to support
i.MX system controller unit SoC info driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For imx8m we need a separate small driver to read "speed grading"
information from fuses and determine which OPPs are supported.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable imx-ocotp nvmem driver for fuse access on imx8m family.
The fuse block stores various system information which will be accessed
by client device drivers, e.g. cpufreq driver needs to access fuse for
CPU speed grading setting. So this nvmem driver gets enabled as
built-in.
Tested on imx8mm-evk.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This enables the INA3221 power monitoring driver that is used on many of
the Jetson boards as well as Tegra194 PCIe support.
-----BEGIN PGP SIGNATURE-----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=NJQ7
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.3-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration changes for v5.3-rc1
This enables the INA3221 power monitoring driver that is used on many of
the Jetson boards as well as Tegra194 PCIe support.
* tag 'tegra-for-5.3-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Add Tegra194 PCIe driver
arm64: defconfig: Add HWMON INA3221 support
Signed-off-by: Olof Johansson <olof@lixom.net>
W dniu 19.06.2019 o 16:21, Olof Johansson pisze:
> On Mon, Jun 17, 2019 at 06:04:09PM +0200, Marcin Juszkiewicz wrote:
>> Follow x86-64 defconfig on enabling basic LVM support.
>>
>> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
>
> Do you need this to be =y? If you use LVM, you usually boot with a ramdisk that
> will hold modules.
Right. Forgot to change.
From 63003d0047062949a1231f67e1efdcb96b54323a Mon Sep 17 00:00:00 2001
From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Date: Mon, 27 May 2019 20:14:34 +0200
Subject: [PATCH 1/3] arm64 defconfig: enable LVM support
Follow x86-64 defconfig on enabling basic LVM support.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Mellanox cards are present in several AArch64 servers.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
A bunch of arm64 boards can now use the Lima driver, let's enable it
in defconfig, it will be useful to have it enabled for KernelCI
boot and runtime testing.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
With the goal of making it easier for CI services such as KernelCI to
run tests for it.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enables the FSL EDMA driver by default. This also works around an issue
that imx-i2c driver keeps deferring the probe because of the DMA is not
ready. And currently the DMA engine framework can not correctly tell
if the DMA channels will truly become available later (it will never be
available if the DMA driver is not enabled).
This will cause indefinite messages like below:
[ 3.335829] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported
[ 3.344455] ina2xx 0-0040: power monitor ina220 (Rshunt = 1000 uOhm)
[ 3.350917] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
[ 3.362089] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported
[ 3.370741] ina2xx 0-0040: power monitor ina220 (Rshunt = 1000 uOhm)
[ 3.377205] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
[ 3.388455] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported
.....
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tegra186 board under arm64 is using this device, according to
its dts file. So this patch enables its driver with a "=m" as
the other HWMON drivers.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable support for the TI HD3SS320 USB Type-C DRP Port controller driver
by turning on CONFIG_TYPEC and CONFIG_TYPEC_HD3SS3220 as modules.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Allwinner sun6i DMA drivers is used on A64 and H6 boards.
Enable it as a module.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The SUNXI_WATCHDOG option is required to make the
watchdog available on Allwinner H6.
Enable this option as a module.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The EK874 board comes with a TDA19988 chip on board, therefore
enable it in the defconfig.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sid contains speedbin information and temperature sensor
calibration information and more, which are important for SOC.
This patch enables CONFIG_NVMEM_SUNXI_SID by default.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Enable mfd and regulator driver for PMIC found on imx8mm-evk boards
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The current lpi2c driver can work on imx8 chips so lets enable it. Also
enable few i2c peripherals found on imx8qxp-mek I2C (some were already
used for other boards).
Sensors enabled as modules because not required for boot.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Basic imx8mm support is already available in linux-next just not
enabled in arm64 defconfig. With this patch imx8mm-evk can boot.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8MQ needs it for RTC support.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_IMX_SC_WDT as module to support i.MX system
controller watchdog.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the CONFIG_SPI_IMX option so that i.MX8M can use the
imx spi driver by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Mostly the usual churn due to options being reordered or not added
in the right locations.
- Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out.
-----BEGIN PGP SIGNATURE-----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=IKfA
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Mostly the usual churn due to options being reordered or not added in
the right locations.
Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
arm64: defconfig: Update UFSHCD for Hi3660 soc
ARM: multi_v7_defconfig: Enable support for STPMIC1
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
arm64: defconfig: enable mv-xor driver
ARM: Enable Trusted Foundations for multiplatform ARM v7
ARM: tegra: Enable Trusted Foundations by default
ARM: tegra: Update default configuration for v5.1-rc1
ARM: multi_v7_defconfig: Update for moved options
ARM: multi_v7_defconfig: Update for dropped options
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig
ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
ARM: qcom_defconfig: add options for LG Nexus 5 phone
arm64: defconfig: include the Agilex platform to the arm64 defconfig
arm64: defconfig: Add PWM Fan support
arm64: defconfig: Enable Tegra HDA support
ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Refresh for v5.1-rc1
ARM: multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers
arm64: defconfig: enable fpga and service layer
...
- Document (kerneldoc) core mfd_add_devices() API
- New Drivers
- Add support for Altera SOCFPGA System Manager
- Add support for Maxim MAX77650/77651 PMIC
- Add support for Maxim MAX77663 PMIC
- Add support for ST Multi-Function eXpander (STMFX)
- New Device Support
- Add support for LEDs to Intel Cherry Trail Whiskey Cove PMIC
- Add support for RTC to SAMSUNG Electronics S2MPA01 PMIC
- Add support for SAM9X60 to Atmel HLCDC (High-end LCD Controller)
- Add support for USB X-Powers AXP 8xx PMICs
- Add support for Integrated Sensor Hub (ISH) to ChromeOS EC
- Add support for USB PD Logger to ChromeOS EC
- Add support for AXP223 to X-Powers AXP series PMICs
- Add support for Power Supply to X-Powers AXP 803 PMICs
- Add support for Comet Lake to Intel Low Power Subsystem
- Add support for Fingerprint MCU to ChromeOS EC
- Add support for Touchpad MCU to ChromeOS EC
- Move TI LM3532 support to LED
- New Functionality
- Add/extend DT support; max77650, max77620
- Add support for power-off; max77620
- Add support for clocking; syscon
- Add support for host sleep event; cros_ec
- Fix-ups
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
- Bug Fixes
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio
-----BEGIN PGP SIGNATURE-----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=dTSD
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Document (kerneldoc) core mfd_add_devices() API
New Drivers:
- Altera SOCFPGA System Manager
- Maxim MAX77650/77651 PMIC
- Maxim MAX77663 PMIC
- ST Multi-Function eXpander (STMFX)
New Device Support:
- LEDs support in Intel Cherry Trail Whiskey Cove PMIC
- RTC support in SAMSUNG Electronics S2MPA01 PMIC
- SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
- USB X-Powers AXP 8xx PMICs
- Integrated Sensor Hub (ISH) in ChromeOS EC
- USB PD Logger in ChromeOS EC
- AXP223 in X-Powers AXP series PMICs
- Power Supply in X-Powers AXP 803 PMICs
- Comet Lake in Intel Low Power Subsystem
- Fingerprint MCU in ChromeOS EC
- Touchpad MCU in ChromeOS EC
- Move TI LM3532 support to LED
New Functionality:
- max77650, max77620: Add/extend DT support
- max77620 power-off
- syscon clocking
- croc_ec host sleep event
Fix-ups:
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
Bug Fixes:
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio"
* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: Use dev_get_drvdata() directly
mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
mfd: cros_ec: Instantiate properly CrOS FP MCU device
mfd: cros_ec: Update the EC feature codes
mfd: intel-lpss: Add Intel Comet Lake PCI IDs
mfd: lochnagar: Add links to binding docs for sound and hwmon
mfd: ab8500-debugfs: Fix a typo ("deubgfs")
mfd: imx6sx: Add MQS register definition for iomuxc gpr
dt-bindings: mfd: LMU: Fix lm3632 dt binding example
mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
mfd: tps65912-spi: Add missing of table registration
mfd: axp20x: Add USB power supply mfd cell to AXP803
mfd: sun6i-prcm: Fix build warning for non-OF configurations
mfd: intel-lpss: Set the device in reset state when init
platform/chrome: Add support for v1 of host sleep event
mfd: cros_ec: Add host_sleep_event_v1 command
mfd: cros_ec: Instantiate the CrOS USB PD logger driver
mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
...
- Update the defconfig to enable the mv-xor driver found on the
Armada 3700
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXL7CVgAKCRALBhiOFHI7
1VzpAJ4g2dWLtkB9F1YlPOMGzfZnAPamKACgjUMB8UM2+avwae6rdk6oa3qudSQ=
=gg0T
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-5.2-1' of git://git.infradead.org/linux-mvebu into arm/defconfig
mvebu arm64 for 5.2 (part 1)
- Update the defconfig to enable the mv-xor driver found on the
Armada 3700
* tag 'mvebu-arm64-5.2-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable mv-xor driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Just a single patch to enable our SPI controller on the arm64 defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXLmzPwAKCRDj7w1vZxhR
xdmbAP0WZ/2DSFexF4dkaRMcMfZ74b10mh4Yvn9usm6nUll3NAEA2IbdPWLK+/pk
ocj1Jwr4KHxHnMBXES1SQ6I9AYo9YAs=
=bA+y
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Allwinner arm64 defconfig changes for 5.2
Just a single patch to enable our SPI controller on the arm64 defconfig.
* tag 'sunxi-config64-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable SPI_SUN6I
Signed-off-by: Olof Johansson <olof@lixom.net>
These patches enable PWM fan and Tegra HDA support in the 64-bit ARM
default configuration, so that these features are enabled by default.
-----BEGIN PGP SIGNATURE-----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=rrf3
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.2-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration updates for v5.2-rc1
These patches enable PWM fan and Tegra HDA support in the 64-bit ARM
default configuration, so that these features are enabled by default.
* tag 'tegra-for-5.2-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Add PWM Fan support
arm64: defconfig: Enable Tegra HDA support
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 7ee7ef24d0 ("scsi: arm64: defconfig: enable configs for Hisilicon ufs")
set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends
on
(CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD)
were left to being built as modules.
Commit 1f4fa50dd4 ("arm64: defconfig: Regenerate for v4.20") "fixed"
that by reverting to 'CONFIG_SCSI_UFS_HISI=m'.
Thing is, if the rootfs is stored in the on-board flash (which
is the "canonical" way of doing things), we either need these drivers
to be built-in, or we need to fiddle with an initramfs to access that
flash and eventually load the modules installed over there.
The former is the easiest, do that.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The mv-xor DMA driver is used for the XOR engine found in the ARM64
Marvell Armada 3720 SoC, so it makes sense to have it enabled in the
arm64 defconfig. A recent boot-time regression was found in mv-xor,
which would have been more easily noticed with this driver enabled by
default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The Tegra194 Jetson AGX Xavier board includes a PWM based fan. Enable
PWM fan support in the ARM64 defconfig to support the fan on this board.
Please note that the device-tree PWM fan node is already present for
this board.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable support for Tegra HDA controller in the ARM64 defconfig which is
used by Tegra210, Tegra186 and Tegra194. Please note that the Tegra HDA
controller requires the HDA HDMI/DP codec driver and so enable this as
well.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the Stratix10 System Manager by default.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Enable FPGA framework, Intel Stratix10 SoC FPGA manager, Stratix10
service layer, and Altera Freeze Bridge drivers.
Intel Stratix10 service layer driver was added with commit 7ca5ce8965
("firmware: add Intel Stratix10 service layer driver").
Intel Stratix10 service layer provides kernel APIs for drivers to request
access to the secure features. Such features include FPGA programming,
remote status update, and read and write secure registers.
While clients of the service layer can be built as modules, the service
layer itself has to be configured as built-in. The service layer is
dependent on ARCH_STRATIX10.
Enabling Altera Freeze Bridge depends on commit 38cd7ad5bd
("fpga: altera_freeze_bridge: remove restriction to socfpga").
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Enable support for RX-8571/RX-8581 RTC by turning on
CONFIG_RTC_DRV_RX8581 as module.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable SUN6I SPI controller for Allwinner ARM64 SoC's.
This would helpful to setup spi flash, for another booting source.
mark it as static since it require during boot.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Two new additions to arm64's defconfig to support A64 boards.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXF1a8wAKCRDj7w1vZxhR
xYvJAQCpobGf96IZw2tNgyrz/7hd54ZjpYkkvAJuLK5wMHhHuAD/d2IBBVQ2yu5q
IX6Z40PXrKz43QFFszDThZy9tMqdng0=
=TfND
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Allwinner arm64 defconfig changes for 5.1
Two new additions to arm64's defconfig to support A64 boards.
* tag 'sunxi-config64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable SUN6I Camera sensor interface
arm64: defconfig: Enable I2C_GPIO
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable:
* PCM3168A support which is required for audio on Kingfisher daughterboards
* R-Car thermal support
* Gen3 PCIe PHY support
-----BEGIN PGP SIGNATURE-----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=gf/c
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig
Renesas ARM64 Based SoC Defconfig Updates for v5.1
Enable:
* PCM3168A support which is required for audio on Kingfisher daughterboards
* R-Car thermal support
* Gen3 PCIe PHY support
* tag 'renesas-arm64-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: select Kingfisher Sound related configs
arm64: defconfig: Enable R-Car thermal driver
arm64: defconfig: Enable CONFIG_PHY_RCAR_GEN3_PCIE
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enables the TCU driver to be built into the kernel, so that the TCU can
be used as debug serial on Jetson Xavier. This also enables the MAX8973
regulator driver that is required for CPU frequency scaling on Tegra210.
-----BEGIN PGP SIGNATURE-----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=Xuyn
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration changes for v5.1-rc1
Enables the TCU driver to be built into the kernel, so that the TCU can
be used as debug serial on Jetson Xavier. This also enables the MAX8973
regulator driver that is required for CPU frequency scaling on Tegra210.
* tag 'tegra-for-5.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable Tegra TCU
arm64: defconfig: Enable MAX8973 regulator
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable a number of i.MX SoC and driver options in arm64 defconfig.
The built-in drivers include: clock, pinctrl, power domain, serial,
MBox, SCU, Ethernet, MMC, regulator and watchdog, which are mostly
essential for building an useful kernel image for i.MX8 platform,
booting with rootfs on NFS or eMMC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcYqUwAAoJEFBXWFqHsHzOJnkH/2R0OT6zLykAAvG2grUjD73x
5VTEbvlSnSrOur0vBXEZfTi6l3mvtuXj3L9wEpIB9dKgOAgGflAOqRlib0xrwFXW
JRnzgckooeEpeMbj482gN2xUIbkAg7V8P15lhrkPIGKcGDwtc2o2uTfPRMyRKxRB
szH3xl+OR38snzqtuaPEvxdguE2ZW1fMRm8CqDq3nKYD21wYW6WB6S9MLlaYfD6k
RxtjEBCbUCV7OaN90HlXi/u7fkzwDgd9dN4M18DTgP59qWkZNmZ+HGj2Wf8a3Vgc
7E/cBL+W1fbcGto+j5H2wNHYzT4C9O9EKbskKOs/HW2zojxVfNXsBrXOLMreWMk=
=dPMN
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig updates for 5.1:
- Enable a number of i.MX SoC and driver options in arm64 defconfig.
The built-in drivers include: clock, pinctrl, power domain, serial,
MBox, SCU, Ethernet, MMC, regulator and watchdog, which are mostly
essential for building an useful kernel image for i.MX8 platform,
booting with rootfs on NFS or eMMC.
* tag 'imx-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Add IMX2+ watchdog
arm64: defconfig: Enable PFUZE100 regulator
arm64: defconfig: enable NXP FlexSPI driver
arm64: defconfig: Add i.MX8MQ boot necessary configs
arm64: defconfig: add imx8qxp support
arm64: defconfig: add i.MX system controller RTC support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is needed to boot correctly from eMMC on the i.MX8MQ EVK board.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Tegra Combined UART is used on some Tegra194 devices as a way of
multiplexing output from multiple producers onto a single physical UART.
Enable this by default so that it can be used as the default console to
write kernel messages to.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 Smaug board uses MAX77621 for both CPU & GPU rail. Note
that max8973 and max77621 share the same driver. So enable this driver
for the PMIC.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable Camera sensor interface for Allwinner SUN6I SoC's.
This support enable V4L2 platform drivers static and
VIDEO_SUN6I_CSI as module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The GPIO-based bitbanging I2C driver is required to configure
CSI data, clock pins on CSI block in Allwinner A64 SoC.
Let build it as module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This switches out the old fbdev PL11x driver to the new
DRM driver in the Aarch64/ARM64 defconfig. Some ARM
reference designs use this IP with the Silicon Image
SII902x HDMI bridge so activate both.
The required DTS changes are already in-tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Compile the necessary drivers as modules, including codecs, for the
s400 sound card.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This patch selects PCM3168A which is needed for Kingfisher Sound
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable the R-Car thermal driver as a built-in.
This seems safer than enabling as a module from the point of view of
protecting equipment from overheating.
This driver is used in conjunction with the R-Car V3M (r8a77970),
E3 (r8a77990) and D3 (r8a77995) SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable R-Car Gen3 PCIe PHY support, which is needed for PCIe to function
on the Renesas Condor board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a build
fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante
GPU, 256MB RAM, Wifi). This includes some acked platform-specific
drivers (serial, etc). This also include DTs for two boards with this
SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwv4lAPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3JQsQAIcvwnI8rKPEskd20kNaj5bCUlG2hcIN/VoT
scq1iCXpICOF53jBQvDoe48n+Ji4mI2VD7AIZD8XVppR+aHgpy8fkjX+uz8Ap0dG
8B2y9vJ6nomrxKslnFEUk6LxpsaadpzTQDlcHAQvPdJxkvmMuA2b8LMGZhoAQ+dB
lCw/qbjmoMEAV+dKXqRu62wwjZ10j4B7ex1XB1gnfjJYy+Splnd5fkdFCvd3wk+7
BOH2iGROyLC0TC6ggqv45NNm6EykO9XqI5nq/3VHq9aBVJVWtFUQhDScjNf6qyYM
mvUg6ZxmiTyIjhN+erttFXtxSKCH0BIdlBLZzaQ9W2XbTKMgzUlgK5GjQGqKCG6A
QZHs9oe/TQuaHZ2ghMRbxcTWZC8Zdi1hYYa8fB7yNCZKnPNLRaA5P7O/3/s796B6
DXpIHlU4lpyRdg26Zxh+FXYIXLsUYk9WNcwhjFbUQ/WXP3L9qf7FUU1EeSQeGDHU
yRCE+kuKFs5FJnAZYXQ+0BCv0v8GFLMKTXDTbYtVFt0QDWVeeWwRt6gCOcHv1vBI
IbZ0QLn1fzW2efgsXXB9i9VXO5AiP3EMx2A9Lqvrv+ufRXzQlBPbYZhN/Lp+BuDC
moWdT5Cmye00uu35wY6H7Ycd+CO29dJ/B+hKbgqjyzFkZJiwWnPoeVQH2M1IkjOj
IydIEbEo
=qgZw
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull more ARM SoC updates from Olof Johansson:
"A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a
build fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
Vivante GPU, 256MB RAM, Wifi). This includes some acked
platform-specific drivers (serial, etc). This also include DTs for
two boards with this SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
arm64: defconfig: Re-enable bcm2835-thermal driver
MAINTAINERS: Add entry for RDA Micro SoC architecture
tty: serial: Add RDA8810PL UART driver
ARM: dts: rda8810pl: Add interrupt support for UART
dt-bindings: serial: Document RDA Micro UART
ARM: dts: rda8810pl: Add timer support
ARM: dts: Add devicetree for OrangePi i96 board
ARM: dts: Add devicetree for OrangePi 2G IoT board
ARM: dts: Add devicetree for RDA8810PL SoC
ARM: Prepare RDA8810PL SoC
dt-bindings: arm: Document RDA8810PL and reference boards
dt-bindings: Add RDA Micro vendor prefix
ARM: sti: remove pen_release and boot_lock
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
...
The bcm2835-thermal driver was added with commit ac178e4280
("ARM64: bcm2835: add thermal driver to default config"). Unfortunately
this was accidentally dropped by commit eb1e6716cc
("arm64: defconfig: sync with savedefconfig"). So enable the driver again.
Fixes: eb1e6716cc ("arm64: defconfig: sync with savedefconfig")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit e8342cc795 ("enable CAAM crypto engine on QorIQ DPAA2 SoCs")
enabled CRYPTO_DEV_FSL_DPAA2_CAAM, which depends on FSL_MC_DPIO,
which is not set. Enable FSL_MC_BUS, and build FSL_MC_DPIO and
CRYPTO_DEV_FSL_DPAA2_CAAM as modules.
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
[olof: refreshed due to churn]
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit e78d57b2f8 ("pinctrl: mediatek: add pinctrl-moore that
implements the generic pinctrl dt-bindings") made PINCTRL_MT7622
depend on PINCTRL_MTK_MOORE, so it fell off in the refresh.
Add MTK_MOORE, which automatically enables MT7622.
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
[olof: refresh and minor commit message reword]
Signed-off-by: Olof Johansson <olof@lixom.net>
Run the platform defconfig through kbuild, and handle the trivial case
where options merely move around.
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
[olof: refreshed due to some recent churn]
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Olof Johansson <olof@lixom.net>
A bunch of patches to improve the coverage of Allwinner drivers in the
arm64 defconfig, mostly targeted at adding display drivers support.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqBowAKCRDj7w1vZxhR
xVZMAQCfcR+ZJf0vqHJ2fR0nOroltxrs36wU/SutdePaHInQuAD/dfdXlVonEaGN
1VBKIGzl1Z9PNTsCGADLN0dQRLlX/Q4=
=Q2ck
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/defconfig
Allwinner arm64 defconfig for 4.21
A bunch of patches to improve the coverage of Allwinner drivers in the
arm64 defconfig, mostly targeted at adding display drivers support.
* tag 'sunxi-config64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable PWM_SUN4I
arm64: defconfig: Enable DRM_SUN8I_DW_HDMI
arm64: defconfig: Enable DRM_SUN8I_MIXER
arm64: defconfig: Enable MFD_AXP20X_I2C
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the GCC and PINCTRL for MSM8998 to make upstream boot to console.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable a few core config options to be able to boot SDM845 MTP.
The GCC, PINCTRL and GENI options are required to be able to boot to a
console. Several clocks from GCC are parented by the "bi_tcxo" clock
from the RPMH clock driver, so enable this to save others the time to
debug the missing parent clocks later. RPMH depends on the COMMAND_DB.
While we're enabling the others let's do RPMH regulators as well, as
everything beyond this point depends on that.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable remoteproc configs to boot the remoteprocs on QC chipsets. These
are common configs and not specific to a specific SoC so should be enabled
across the board.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable GCC and pin control configs to make it possible to boot the
QCS404 EVBs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Allwinner PWM support need for ARM64 Allwinner SoC's
which used pwms, builds it as module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Allwinner DesignWare HDMI is needed for HDMI support
in ARM64 Allwinner SoC's, build it as module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Allwinner Display Engine 2.0 Mixer is need for ARM64
Allwinner SoC's, build it as module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The Allwinner H6 SoC is paired with the X-Powers AXP805 PMIC
connected via I2C.
Enable the driver for this PMIC.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # OPI-1+
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The arm64 port now runs on servers which use IPMI. This patch enables
relevant core configs to save manually enabling them when testing
mainline.
Signed-off-by: John Garry <john.garry@huawei.com>
[olof: Switched to =m instead of =y]
Signed-off-by: Olof Johansson <olof@lixom.net>
The defconfig changes are split out from the rest again. This time we
have a number of changes for NXP i.MX and Renesas, including a cleanup of
old options.
Some smaller changes are for Socionext Uniphier, Allwinner, Qualcomm,
Rockchip, Renesas, AT91, Hisilicon, and STM32. All of these just enable
platform specific device drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cE9r
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"The defconfig changes are split out from the rest again. This time we
have a number of changes for NXP i.MX and Renesas, including a cleanup
of old options.
Some smaller changes are for Socionext Uniphier, Allwinner, Qualcomm,
Rockchip, Renesas, AT91, Hisilicon, and STM32. All of these just
enable platform specific device drivers"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits)
arm64: defconfig: Enable SERIAL_8250_OMAP
arm64: defconfig: Enable TI_SCI related configs
ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACL
ARM: imx_v4_v5_defconfig: Remove unneeded options
ARM: imx_v4_v5_defconfig: Re-sync defconfig
ARM: mxs_defconfig: Remove unneeded options
ARM: mxs_defconfig: Re-sync defconfig
ARM: imx_v6_v7_defconfig: Remove unneeded options
ARM: imx_v6_v7_defconfig: Re-sync defconfig
ARM: imx_v6_v7_defconfig: select CONFIG_ARM_CPUIDLE by default
ARM: imx_v6_v7_defconfig: Make usbnet drivers builtin for boot
ARM: imx_v6_v7_defconfig: add CONFIG_FW_LOADER_USER_HELPER
ARM: imx_v6_v7_defconfig: Select CONFIG_SENSORS_MC13783_ADC
ARM: multi_v7_defconfig: enable CONFIG_MMC_UNIPHIER
arm64: defconfig: enable CONFIG_MMC_UNIPHIER
ARM: multi_v7_defconfig: Enable USB phys for UniPhier SoCs
arm64: defconfig: Enable USB phys for UniPhier SoCs
arm64: defconfig: enable Rockchip Innosilicon hdmiphy
arm64: defconfig: Enable PCIEPORTBUS
arm64: defconfig: enable HiSilicon HNS3 driver
...
Enable TI System Control Interface (TI_SCI) Message Protocol library
and it's relevant power management drivers using this library.
TI's AM6 SoC uses this TI_SCI library to communicate to its system
controller(DMSC). While at it, enable TI_MESSAGE_MANAGER mailbox driver
using which this communication happens.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here is a single config change to enable the DRM driver in the arm64
defconfig.
-----BEGIN PGP SIGNATURE-----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=MBKv
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/defconfig
Allwinner arm64 config changes for 4.20
Here is a single config change to enable the DRM driver in the arm64
defconfig.
* tag 'sunxi-config64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable CONFIG_DRM_SUN4I
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the USB3 and USB2 phys implemented in UniPhier SoCs.
These phys are necessary for dwc3 and ehci controllers driving
the USB ports on arm64 UniPhier SoCs.
Since the USB host drivers are already built-in, so only the phy
driver are missing to allow booting with USB devices.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The rk3228 and rk3328 socs use an MMIO-connected hdmi-phy from Innosilicon.
So enable the necessary driver as module.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Enable integrated NIC driver(hns3) for hisilicon SoCs
- Enable PCIe Port bus to support some PCIe features like
AER, hotplug, PME and DPC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Gn5v
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.20' of git://github.com/hisilicon/linux-hisi into next/defconfig
ARM64: hisilicon: defconfig updates for 4.20
- Enable integrated NIC driver(hns3) for hisilicon SoCs
- Enable PCIe Port bus to support some PCIe features like
AER, hotplug, PME and DPC
* tag 'hisi-defconfig-for-4.20' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable PCIEPORTBUS
arm64: defconfig: enable HiSilicon HNS3 driver
Signed-off-by: Olof Johansson <olof@lixom.net>
PCIe features like AER, Hotplug, PME, DPC depend on PCIEPORTBUS,
so enable PCIEPORTBUS as default.
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable CAAM (Cryptographic Accelerator and Assurance Module) driver
for QorIQ Data Path Acceleration Architecture (DPAA) v2.
It handles DPSECI (Data Path SEC Interface) DPAA2 objects that sit
on the Management Complex (MC) fsl-mc bus.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable the Renesas RZ/G2E (R8A774C0) SoC in the ARM64 defconfig.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The QRTR packet family is used for a wide range of communication between
services in Qualcomm platforms. Examples of services using this
transport for communication are remoteproc management, modem control,
positioning, power management and WiFi.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable DRM Support for Allwinner Display Engine, built as a module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Now that the scalar fallbacks have been moved out of this driver into
the core crc32()/crc32c() routines, we are left with a CRC32 crypto API
driver for arm64 that is based only on 64x64 polynomial multiplication,
which is an optional instruction in the ARMv8 architecture, and is less
and less likely to be available on cores that do not also implement the
CRC32 instructions, given that those are mandatory in the architecture
as of ARMv8.1.
Since the scalar instructions do not require the special handling that
SIMD instructions do, and since they turn out to be considerably faster
on some cores (Cortex-A53) as well, there is really no point in keeping
this code around so let's just remove it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable the Renesas RZ/G2M (R8A774A1) SoC in the ARM64 defconfig.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
We keep these separate since some files are shared and conflict-prone,
but there isn't really much to write about here.
Some of the churnier pieces is for the Aspeed platforms, which did an
overdue refresh of the defconfig, and enabled USB gadget and some
drivers from there. Most of the rest are minor additions here and there
to turn on drivers that are needed or useful on the various platforms.
-----BEGIN PGP SIGNATURE-----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=t+qo
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep these separate since some files are shared and conflict-prone,
but there isn't really much to write about here.
Some of the churnier pieces is for the Aspeed platforms, which did an
overdue refresh of the defconfig, and enabled USB gadget and some
drivers from there. Most of the rest are minor additions here and
there to turn on drivers that are needed or useful on the various
platforms"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
ARM: multi_v7_defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
ARM: config: aspeed: Enable new FSI drivers
ARM: config: multi_v5: Enable ASPEED drivers
ARM: config: multi_v5: Refresh configuration
ARM: config: aspeed: Update defconfig
ARM: multi_v7_defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Disable /sbin/hotplug fork-bomb
ARM: shmobile: defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Enable reset controller support
ARM: shmobile: defconfig: Drop NET_VENDOR_<FOO>=n
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus.
arm64: defconfig: Enable CONFIG_MTD_NAND_QCOM for IPQ8074
ARM: qcom_defconfig: Enable QCOM NAND related configs
ARM: imx_v6_v7_defconfig: add DMATEST support
ARM: mvebu_v7_defconfig: enable SFP support
ARM: mvebu_v7_defconfig: sync defconfig
ARM: multi_v7_defconfig: Add Marvell NAND controller support
arm: configs: Add USB gadget to Aspeed G5 defconfig
arm: configs: Add USB gadget to Aspeed G4 defconfig
arm64: defconfig: enable HiSilicon PMU driver
...
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
- New Device Support
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
- New Functionality
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
- Fix-ups
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
- Bug Fixes
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501
-----BEGIN PGP SIGNATURE-----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=4Yj4
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
New Device Support:
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
New Functionality:
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
Fix-upsL
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
Bug Fixes:
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501"
* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
mfd: madera: Add register definitions for accessory detect
mfd: sm501: Set coherent_dma_mask when creating subdevices
mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
mfd: bd71837: Core driver for ROHM BD71837 PMIC
media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
mfd: sec-core: Export OF module alias table
mfd: as3722: Disable auto-power-on when AC OK
mfd: axp20x: Support AXP806 in I2C mode
mfd: axp20x: Add self-working mode support for AXP806
dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
mfd: rave-sp: Add legacy watchdog ping command translation
mfd: rave-sp: Add legacy EEPROM access command translation
mfd: rave-sp: Initialize flow control and parity of the port
mfd: rave-sp: Fix incorrectly specified checksum type
mfd: rave-sp: Remove unused defines
mfd: hi655x: Fix regmap area declared size for hi655x
mfd: ti_am335x_tscadc: Fix struct clk memory leak
...
This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the
continuing absence of Nic we have target updates for tcmu and target
core (all with reviews and acks). The biggest observable change is
going to be that we're (again) trying to switch to mulitqueue as the
default (a user can still override the setting on the kernel command
line). Other major core stuff is the removal of the remaining
Microchannel drivers, an update of the internal timers and some
reworks of completion and result handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW3R3niYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishauRAP4yfBKK
dbxF81c/Bxi/Stk16FWkOOrjs4CizwmnMcpM5wD/UmM9o6ebDzaYpZgA8wIl7X/N
o/JckEZZpIp+5NySZNc=
=ggLB
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr.
In addition, with the continuing absence of Nic we have target updates
for tcmu and target core (all with reviews and acks).
The biggest observable change is going to be that we're (again) trying
to switch to mulitqueue as the default (a user can still override the
setting on the kernel command line).
Other major core stuff is the removal of the remaining Microchannel
drivers, an update of the internal timers and some reworks of
completion and result handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
scsi: ufs: remove unnecessary query(DM) UPIU trace
scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
scsi: aacraid: Spelling fix in comment
scsi: mpt3sas: Fix calltrace observed while running IO & reset
scsi: aic94xx: fix an error code in aic94xx_init()
scsi: st: remove redundant pointer STbuffer
scsi: qla2xxx: Update driver version to 10.00.00.08-k
scsi: qla2xxx: Migrate NVME N2N handling into state machine
scsi: qla2xxx: Save frame payload size from ICB
scsi: qla2xxx: Fix stalled relogin
scsi: qla2xxx: Fix race between switch cmd completion and timeout
scsi: qla2xxx: Fix Management Server NPort handle reservation logic
scsi: qla2xxx: Flush mailbox commands on chip reset
scsi: qla2xxx: Fix unintended Logout
scsi: qla2xxx: Fix session state stuck in Get Port DB
scsi: qla2xxx: Fix redundant fc_rport registration
scsi: qla2xxx: Silent erroneous message
scsi: qla2xxx: Prevent sysfs access when chip is down
scsi: qla2xxx: Add longer window for chip reset
...
(Chromebook Plus)
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAltfHfEQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgUzjCACqE5AOVnEk1y9RuyTT1AqfuH6SkAHzw+7n
QnEtfpHTmSP2SMWXUBreebr0YgHDXmyOLWsKO0dIg9kjLcqV2HKIZmHWy6i5ADEu
nvexKJ2YJ51MnzAaWXS08en49nV+pDJmLnNK0eeozGOw3qHqYo7f9AiweBQoHq7D
IZZetI57wiSSrWVD122T8XZQfw9OCYwvBtEYJMOcsUDm89JECDZNgn3mvFr8pzRM
FbGzkWoYJaySlfm/nGyVOZvPgcYymIOzVIxZej26vqa1//5WojAlw5tTvKZ3Jd9i
aR/i4ljxXmHbY3qVu1zgac+aYKMFWLeM5SV0WB5cWo0DYkkMrTC4
=FNsc
-----END PGP SIGNATURE-----
Merge tag 'v4.19-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/defconfig
Enablement of some more features relevant to rk3399-kevin
(Chromebook Plus)
* tag 'v4.19-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus.
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs,
Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification),
vctrl regulators for dynamic CPU voltages, UVC camera support and SBS-
compliant gas gauges needed for the Samsung Chromebook Plus.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* Enable BD9571MWV regulator in ARM64 defconfig
This is to allow wider testing of the BD9571 PMIC which is
present on boards with Renesas R-Car Gen3 SoCs
-----BEGIN PGP SIGNATURE-----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=BkCA
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM64 Based SoC Defconfig Updates for v4.19
* Enable BD9571MWV regulator in ARM64 defconfig
This is to allow wider testing of the BD9571 PMIC which is
present on boards with Renesas R-Car Gen3 SoCs
* tag 'renesas-arm64-defconfig-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: Enable BD9571MWV regulator
Signed-off-by: Olof Johansson <olof@lixom.net>
QCOM IPQ8074 boards contain NAND flash memory for which
this config needs to be enabled.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
for 4.19, please pull the following changes:
- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in the
arm64 defconfig file
- Ray enables the ARM SP805 watchdog driver in the arm64 defconfig file
-----BEGIN PGP SIGNATURE-----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=DLo+
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.19/defconfig-arm64' of https://github.com/Broadcom/stblinux into next/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig changes
for 4.19, please pull the following changes:
- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in the
arm64 defconfig file
- Ray enables the ARM SP805 watchdog driver in the arm64 defconfig file
* tag 'arm-soc/for-4.19/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG
arm64: defconfig: Enable RPi voltage sensor
Signed-off-by: Olof Johansson <olof@lixom.net>
The cros-ec I2C and SPI transport drivers have been moved from MFD
subsystem to platform/chrome, at the same time, the config symbol has
been renamed and lost the MFD_ prefix, so update all configs to the new
config symbol name.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
The defconfig has drifted over time, as Kconfig entries have changed order
or default values. Several maintainers ended up running 'savedefconfig'
themselves which caused a cascade of conflicts. Let's do it once and
for all in our tree before -rc2 instead.
Signed-off-by: Olof Johansson <olof@lixom.net>
The patch enables the hwmon driver for the Raspberry Pi.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
The BD9571 PMIC is present on the Renesas Salvator-X(S) and R-Car
Starter Kit Premier/Pro development boards.
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Here are the main updates for SoC support (besides DT additions) for ARM
32- and 64-bit platforms. The branch also contains defconfig updates to
turn on drivers and options as needed on the various platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products.
-----BEGIN PGP SIGNATURE-----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=S5wc
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"Here are the main updates for SoC support (besides DT additions) for
ARM 32- and 64-bit platforms. The branch also contains defconfig
updates to turn on drivers and options as needed on the various
platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
MAINTAINERS: add NXP linux team maillist as i.MX reviewer
ARM: stm32: Don't select DMA unconditionally on STM32MP157C
arm64: defconfig: Enable PCIe on msm8996 and db820c
ARM: pxa3xx: enable external wakeup pins
ARM: pxa: stargate2: use device properties for at24 eeprom
arm64: defconfig: Enable HISILICON_LPC
arm64: defconfig: enable drivers for Poplar support
arm64: defconfig: Enable UFS on msm8996
ARM: berlin: switch to SPDX license identifier
arm: berlin: remove non-necessary flush_cache_all()
ARM: berlin: extend BG2CD Kconfig entry
OMAP: CLK: CLKSRC: Add suspend resume hooks
ARM: AM43XX: Add functions to save/restore am43xx control registers
ASoC: ams_delta: use GPIO lookup table
ARM: OMAP1: ams-delta: add GPIO lookup tables
bus: ti-sysc: Fix optional clocks array access
ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
...
* Enable UFS and PCIe for Qualcomm msm8996/db820c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbCHdwAAoJEFKiBbHx2RXV/5sQAIx4JnUs2HfYYnK1ILooGk5h
D95ck/OUAtnAeNfMo6pm13MPd3rMCm5Sjp8qp6vvR4JnImRuIQzPD9MD7s1kgAHm
fPQrEcENfBtPBrYs8skoJQxBuAGcQHOZSyqrTwYJYCqKMm2UymtlpS1zw/N/nWc9
h9Nh2vKc9wgF5sGdDEhCMXMnSqgWTKnAvuJQXAl7FCN1r5AIsI5myMoh1weVPZG2
PseiT2w6KAP38kZkNh/OPx5SDjcRLSrLTlK6s2i5SycAaEstYbPr/3wfsyhR26pH
nhWZzYUDZw5fBhWOBIbKv1vRmBp7Qc312sOcpODoosA7SjQn12Yqt56AC88g5krG
ijJL81Q9OePLh6MAO2oIg04pUSB2TA64b/83VaTXPdWXLxkajaQhIq4Z/JJKGXws
toiv60QaifQW3jvmpSIP2vR68iUHxVchtSu4UvWLlIqKRfCEzq2d0R+cNrwVDM4x
saOfCNee7i3eIDyWkfRzfZNk3gMIGdsmEAxJ9flvtQscNIXGvxKasOLy7bi2iWQ4
G+AXS1hmSHkugeZwU8h2RjOlKkTO5yvWQm9vi60gB/So14RLajgF120Yn2rOF5IS
r+14YXEDHZkGm3FczIgT2drdtXfEmadbYpTROvifnj3WrTi7NJDBOTsf8kV85aa6
Zc/sU/BazzUqQat30BiX
=sPLc
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig
Qualcomm ARM64 Based defconfig Updates for v4.18
* Enable UFS and PCIe for Qualcomm msm8996/db820c
* tag 'qcom-arm64-defconfig-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: defconfig: Enable PCIe on msm8996 and db820c
arm64: defconfig: Enable UFS on msm8996
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable the support of ethernet, eMMC, Combo/INNO phy
and PCIe for Hi3798CV200
- Enable the LPC for hip06 and hip07
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=l2fi
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.18v3' of git://github.com/hisilicon/linux-hisi into next/defconfig
ARM64: hisilicon: defconfig updates for 4.18
- Enable the support of ethernet, eMMC, Combo/INNO phy
and PCIe for Hi3798CV200
- Enable the LPC for hip06 and hip07
* tag 'hisi-defconfig-for-4.18v3' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable HISILICON_LPC
arm64: defconfig: enable drivers for Poplar support
Signed-off-by: Olof Johansson <olof@lixom.net>
The msm8996 PCIe sits behind the "agnoc0", which is represented as a
simple-pm-bus, so enable support for this. Then enable the QMP phy
driver.
Also enable the atl1c ethernet driver and ath10k wlan driver to support
these components on the DragonBoard820c.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Now that the driver has been merged for the HiSilicon
LPC host, enable the relevant config.
Turning on this config will also enable config
INDIRECT_PIO, which would have not been enabled
previously - see config info for more details.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
It enables driver support of Ethernet, eMMC, Combo/INNO phy and PCIe
for Hi3798CV200 Poplar platform.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Adding thermal for Armada 7K/8K and SPI for Armada 3700
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWv7/MgAKCRALBhiOFHI7
1SyaAKCbxPDR48yWie2ZLxneKc/xZu/QwQCffSpKG1EARKRgk/rz5frnF1vwUuw=
=olHS
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.18-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu arm64 for 4.18 (part 1)
Adding thermal for Armada 7K/8K and SPI for Armada 3700
* tag 'mvebu-arm64-4.18-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable the Armada thermal driver
arm64: defconfig: enable CONFIG_SPI_ARMADA_3700
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable in ARM64 defconfig:
- Recently mainlined support for R-Car E3 (r8a77990) SoC
- HDMI sound and depdencies.
HDMI sound is used by R-Car Gen 3. These options are enabled as
modules to avoid unnecesesarily enlarging the kernel image.
-----BEGIN PGP SIGNATURE-----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=pmB3
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM64 Based SoC Defconfig Updates for v4.18
* Enable in ARM64 defconfig:
- Recently mainlined support for R-Car E3 (r8a77990) SoC
- HDMI sound and depdencies.
HDMI sound is used by R-Car Gen 3. These options are enabled as
modules to avoid unnecesesarily enlarging the kernel image.
* tag 'renesas-arm64-defconfig-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: enable R8A77990 SoC
arm64: defconfig: Enable CONFIG_SND_AUDIO_GRAPH_CARD
arm64: defconfig: makes SND_SIMPLE_CARD to module
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable GLINK RPM so that we get RPM regulators and clocks and enable the
UFS host controller driver and the Qualcomm UFS platform driver. The UFS
phy is selected by the Qualcomm UFS driver.
The simple ondemand devfreq governor must be builtin, as there's no
mechanism for automatically loading it, causing UFS HCD initialization
to fail.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch enables the Armada thermal driver to support thermal
management on Marvell EBU Armada SoCs (7K,8K).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Enable the Renesas R-Car E3 (R8A77990) SoC in the ARM64 defconfig.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
as well as general cros-ec, hid, touchscreen bluetooth and wifi-drivers
on 64bit arm platforms.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlr5d3UQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgV6yB/9Xckx6aeyzem9wP6qFBX5v3hGit9inN+F9
mCf/0HlWpMs1TvB5HIraXf63Z8xRlqD+X+SQjKOjzyXPbFtPW7Ib++rpZAjod/GZ
THyEPnniW0KnxOqPRG0AkZZLpxUxpC2895VI1E+o8DMA6Pxt5cVqaxEktXdMFoqW
3zsJSGMKa8Cyih+K/ZZGyQTmnxEd8o4nkZS7tjx3YSINVKKoFPKg2kLABTqHr5Ru
kZZ/hhfSkrn+j4l3aZ+gVDeHDpjy5sJZ4w5O+xxuTcnDPhGgRcTwI3Qr6x24Bzqi
HPFjZuf7Utxl4LYXqKebdpQLYC9v4k7GMZKfFm00ur8pE6Iwt7ja
=+n7b
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/defconfig
Enablement of Rockchip-specific efuse, io-domain and typec drivers
as well as general cros-ec, hid, touchscreen bluetooth and wifi-drivers
on 64bit arm platforms.
* tag 'v4.18-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: enable rockchip efuse
arm64: defconfig: Enable bluetooth USB support
arm64: defconfig: Enable Marvell WiFi-Ex PCIe driver
arm64: defconfig: Enable Atmel Maxtouch driver
arm64: defconfig: Enable HID over I2C drivers
arm64: defconfig: Enable ChromeOS EC drivers for supported Chromebooks.
arm64: defconfig: Enable Rockchip io-domain driver
arm64: defconfig: Enable typec-phy and extcon-usbc-cros-ec for rk3399
Signed-off-by: Olof Johansson <olof@lixom.net>
The VC4 needs more memory than the default setting (16 MB):
vc4-drm soc:gpu: swiotlb: coherent allocation failed, size=16777216
[drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA:
vc4_v3d 3fc00000.v3d: Failed to allocate memory for tile binning: -12.
You may need to enable CMA or give it more memory.
vc4-drm soc:gpu: failed to bind 3fc00000.v3d (ops vc4_v3d_ops [vc4]): -12
vc4-drm soc:gpu: master bind failed: -12
vc4-drm: probe of soc:gpu failed with error -12
So increase the value to 32 MB and fix this issue.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Now Rockchip PCIe drivers could support both of RC mode and EP
mode, so we need to rename the config name. This patch updates
defconfig to reflect the fact that we want to build Rockchip PCIe
controller as RC mode, into a module as before.
Cc: linux-arm-kernel@lists.infradead.org
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The efuses on Rockchip socs often contain informations
about specifics of the chip its running on (leakage currents etc)
which components might want to read to adjust settings accordingly.
So enable the efuse early for that.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
