The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one in
FSYS0 block and other in PERIC block.
The ethernet interface is connected to a switch which is not managed by
Linux.
Adds device tree node for Ethernet in PERIC Block and enables the same for
FSD platform.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Swathi K S <swathi.ks@samsung.com>
Link: https://lore.kernel.org/r/20250307044904.59077-3-swathi.ks@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one
in FSYS0 block and other in PERIC block.
The ethernet interface is managed by a switch which is not managed by
Linux.
Adds device tree node for Ethernet in FSYS0 Block and enables the same for
FSD platform.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Swathi K S <swathi.ks@samsung.com>
Link: https://lore.kernel.org/r/20250307044904.59077-2-swathi.ks@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add device tree node for I2S0 and I2S1 CPU DAI instances for Tesla
FSD platform.
FSD SoC has 2 I2S instances driving stereo channel I2S audio playback
and capture with external DMA support.
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Link: https://lore.kernel.org/r/20230116103823.90757-4-p.rajanbabu@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
PUD values used for UFS, SPI and UART are not reflecting
the default values recommended by FSD HW UM. Therefore,
changing the same to comply with HW UM recommendation.
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Link: https://lore.kernel.org/r/20230102093247.59649-1-p.rajanbabu@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add MCAN device node and enable the same for FSD platform.
This also adds the required pin configuration for the same.
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
Signed-off-by: Vivek Yadav <vivek.2311@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Link: https://lore.kernel.org/r/20221207100632.96200-3-vivek.2311@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Drive strength values used for HSI2C, SPI and UART are not reflecting
the default values recommended by FSD HW UM.
Fixes: 684dac402f ("arm64: dts: fsd: Add initial pinctrl support")
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20221013104024.50179-3-p.rajanbabu@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Drive strength macros defined for FSD platform is not reflecting actual
names and values as per HW UM. FSD SoC pinctrl has following four levels
of drive-strength and their corresponding values:
Level-1 <-> 0
Level-2 <-> 1
Level-4 <-> 2
Level-6 <-> 3
The commit 684dac402f ("arm64: dts: fsd: Add initial pinctrl support")
used drive strength macros defined for Exynos4 SoC family. For some IPs
the macros values of Exynos4 matched and worked well, but Exynos4 SoC
family drive-strength (names and values) is not exactly matching with
FSD SoC.
Fix the drive strength macros to reflect actual names and values given
in FSD HW UM.
Fixes: 684dac402f ("arm64: dts: fsd: Add initial pinctrl support")
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20221013104024.50179-2-p.rajanbabu@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The DTS uses hardware register values directly in pin controller pin
configuration. These are not some IDs or other abstraction layer but
raw numbers used in the registers.
These numbers were previously put in the bindings header to avoid code
duplication and to provide some context meaning (name), but they do not
fit the purpose of bindings. It is also quite confusing to use
constants prefixed with Exynos for other SoC, because there is actually
nothing here in common, except the actual value.
Store the constants in a header next to DTS and use them instead of
bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220605160508.134075-7-krzysztof.kozlowski@linaro.org
Adds FSD ufs device node and enable the same for fsd platform.
This also adds the required pin configuration for the same.
Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220603154714.30532-8-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
