Remove undocumented compatible micron,mt25qu512a.
This fixes the dtbs warning: failed to match any schema with compatible:
['micron,mt25qu512a', 'jedec,spi-nor']
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309184326.75452-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use the more concise interrupts-extended property to fully describe the
interrupts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # G2L family and G3S
Link: https://lore.kernel.org/e9db8758d275ec63b0d6ce086ac3d0ea62966865.1728045620.git.geert+renesas@glider.be
On the RZ/G2L & RZ/V2L SMARC SOMs, the RGMII interface between the SoC
and the Ethernet PHY operates at 1.8V.
The power supply for this interface may be correctly configured in
u-boot, but the kernel should not be relying on this. Now that the
RZ/G2L pinctrl driver supports configuring the Ethernet power supply
voltage, we can simply specify the desired voltage in the device tree.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240625200316.4282-8-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Configure ET0_TXC and ET1_TXC as outputs on the Renesas RZ/[GV]2L SMARC
SoMs, as per RGMII specification.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240625200316.4282-5-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
It looks like txdv-skew-psec is a typo from a copy+paste. txdv-skew-psec
is not present in the PHY bindings nor is it in the driver.
Correct to txen-skew-psec which is clearly what it was meant to be.
Given that the default for txen-skew-psec is 0, and the device tree is
only trying to set it to 0 anyway, there should not be any functional
change from this fix.
Fixes: 361b0dcbd7 ("arm64: dts: renesas: rzg2l-smarc-som: Enable Ethernet")
Fixes: 6494e4f905 ("arm64: dts: renesas: rzg2ul-smarc-som: Enable Ethernet on SMARC platform")
Fixes: ce0c63b6a5 ("arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK")
Cc: stable@vger.kernel.org # 6.1.y
Reported-by: Tomohiro Komagata <tomohiro.komagata.aj@renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230609221136.7431-1-chris.paterson2@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On members of the RZ/G2L family, WDT CH2 is specifically meant to check
the operation of the Cortex-M33 CPU. Using it from a Cortex-A55 CPU
would result in unexpected behaviour. Hence drop all WDT2 nodes and
their references from the affected SoC and SoM DTSI files.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221009230044.10961-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Numbered regulators are prone to conflicts, causing silent overwrites
(see e.g. [1]).
Make conflicts less likely to happen by renaming all numbered regulators
to names reflecting the regulator's purposes.
[1] commit 45f5d5a9e3 ("arm64: dts: renesas: r8a77995: draak: Fix
backlight regulator name").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b90dfeb834c4d7dabd22bf03396f33df58f54507.1652264651.git.geert+renesas@glider.be
Add basic support for the RZ/V2L SMARC EVK (based on R9A07G054L2):
- memory
- External input clock
- CPG
- Pin controller
- SCIF
- GbEthernet
- Audio Clock
It shares the same carrier board with RZ/G2L with the same pin mapping.
Delete the gpio-hog nodes from pinctrl as they will be added later when
the functionality has been tested.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220110134659.30424-12-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add vdd core regulator (1.1 V).
This patch add regulator support for gpu.
The H/W manual mentions nothing about a gpu regulator. So using vdd
core regulator for gpu.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211208104026.421-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/G2L SoM has both 64 GB eMMC and microSD connected to SDHI0.
Both these interfaces are mutually exclusive and the SD0 device
selection is based on the XOR between GPIO_SD0_DEV_SEL and SW1[2]
switch position.
This patch sets GPIO_SD0_DEV_SEL to high in DT. Use the below switch
setting logic for device selection between eMMC and microSD slot
connected to SDHI0.
Set SW1[2] to position 2/OFF for selecting eMMC
Set SW1[2] to position 3/ON for selecting microSD
This patch enables eMMC on RZ/G2L SMARC platform by default.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211010142520.21976-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
