Make sure that the value of bnK is not short so that the subsequent
BnEccModMult() runs in constant time. We take the same approach as with
the modifications to BnEccGenerateKeyPair() where we request bnK to have
all bytes set (no leading zeros that will be cut away) in case the order
of the curve is as byte boundary. In the other cases we add the order
to bnK, which creates bnK1, which we then use for BnEccModMult's scalar
parameter.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Suggested-by: Charanjit Jutla <csjutla@us.ibm.com>
Reviewed-by: Charanjit Jutla <csjutla@us.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
To avoid a potential side channel in the EcSchnorr signing algorithm,
enforce that the OpenSSL-generated bnD does not have leading zeros
that may then cause a timing side channel in the BnEccModMult() operation.
We modified BnEccGenerateKeyPair() so it calls BnEccModMult with a scalar
of constant number of bytes (for a particular curve):
In this version of BnEccGenerateKeyPair we take a dual approach to constant
time requirements: For curves whose order is at the byte boundary, e.g.
NIST P224/P256/P384, we make sure that bnD has all bytes set (no leading zeros)
so that OpenSSL BIGNUM code will not reduce the number of bytes and the
subsequent BnEccModMult() would run faster for a shoter value. For all other
curves whose order is not at the byte boundary, e.g. NIST P521, we simply
always add the order to bnD and call BnEccModMult() with the result bnD1,
which leads to the same result.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Suggested-by: Charanjit Jutla <csjutla@us.ibm.com>
Reviewed-by: Charanjit Jutla <csjutla@us.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Run some additional IBM TSS2 related tests for better code
coverage. We need to switch to Bionic to get the tss2 package.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This patch fixes the following compilation error on Fedora 32 / s390x:
tpm2/Marshal.c: In function 'TPM2B_CREATION_DATA_Marshal':
tpm2/Marshal.c:95:19: error: 'sizePtr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
95 | (*buffer)[0] = (BYTE)((*source >> 8) & 0xff);
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tpm2/Marshal.c:2201:11: note: 'sizePtr' was declared here
2201 | BYTE *sizePtr;
| ^~~~~~~
The error is a false positive since sizePtr will have been initialized if
UINT16_Marshal() is called.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
tpm12/tpm_nvram.c: In function 'TPM_Process_NVWriteValue':
tpm12/tpm_nvram.c:2313:45: error: 'd1NvdataSensitive' may be used uninitialized in this function [-Werror=maybe-uninitialized]
2313 | if ((d1NvdataSensitive->pubInfo.permission.attributes & TPM_NV_PER_WRITEALL) &&
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
This compiler error is a false positive since the above statement is inside
this if clause:
if ((returnCode == TPM_SUCCESS) && !done && !dir) {
However, if d1NvdataSensitive was not set then returnCode is
either != TPM_SUCCESS OR
- case index0 = FALSE : dir = TRUE per line 2106 OR
- case index0 = TRUE (nvIndex = 0): done = TRUE per line 2215.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Fix PCRBelongsTCBGroup by adjusting the set of PCRs that belong to the TCB
Group. The effect of this is that PCR changes to PCR 16 (for example) do
not change the pcrUpdateCounter anymore. The effect *should not* have any
negative side effects when using the TPM.
We also need to update the test cases that now show a different
pcrUpdateCounter in the responses. Also 'swtpm' test cases need
to be fixed to expect the changed result.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
In corner cases where the size of the salt and the size of the hash
to sign + 2 exceed the signature size we cannot use the salt length =
hash length but have to resort to using the maximum possible salt
length.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Call EVP_PKEY_CTX_set_rsa_pss_saltlen(ctx, -1) when creating an RSA
signature to set the PSS salt length to the digest length. Without
this call we previously set the salt length to the maximum
permissible value, but this is not how TPM 2 implements it.
Per interoperability testing between signatures created previously
with the max. permissible value and the new code, which does not
modify the signature verification code, old signatures still verify.
New signatures also verify.
This patch may solve interoperability with hardware TPMs that signatures
created following this patch now verify on hardware TPMs as well.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Always use a temporary buffer large enough to meet the requirements of the
EVP_DecryptUpdate() call.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add missing call of EVP_CIPHER_CTX_set_padding(ctx, 0) in the symmetric
decryption case. This was missing and failed some decryption cases.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add a missing input size check for CryptSymmetricDecrypt so that we return
the proper error code TPM_RC_SIZE in case the input size is not a multiple
of the block size. Before TPM_RC_FAILURE was returned.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
For the RSA decryption we have to use an output buffer of the size of the
(largest possible) RSA key for the decryption to always work.
This fixes a stack corruption bug that caused a SIGBUS and termination of
'swtpm'.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Add missing EC Curve cases in Unmarshal function.
Also, don't accept curves that are not usable during runtime because OpenSSL
may not support them.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609
The above gcc on x86 with -O3 reports the following false positives:
gcc -DHAVE_CONFIG_H -I. -I.. -include tpm_library_conf.h -I../include/libtpms -I../include/libtpms -fstack-protector-strong -DTPM_V12 -DTPM_PCCLIENT -DTPM_VOLATILE_LOAD -DTPM_ENABLE_ACTIVATE -DTPM_AES -DTPM_LIBTPMS_CALLBACKS -DTPM_NV_DISK -DTPM_POSIX -DTPM_NOMAINTENANCE_COMMANDS -O3 -DUSE_OPENSSL_FUNCTIONS_SYMMETRIC=1 -DUSE_OPENSSL_FUNCTIONS_EC=1 -DUSE_OPENSSL_FUNCTIONS_ECDSA=0 -DUSE_OPENSSL_FUNCTIONS_RSA=0 -Wall -Werror -Wreturn-type -Wsign-compare -Wno-self-assign -MT tpm12/libtpms_tpm12_la-tpm_nvram.lo -MD -MP -MF tpm12/.deps/libtpms_tpm12_la-tpm_nvram.Tpo -c tpm12/tpm_nvram.c -o tpm12/libtpms_tpm12_la-tpm_nvram.o
tpm12/tpm_nvram.c: In function ‘TPM_Process_NVReadValue’:
tpm12/tpm_nvram.c:1539:38: error: ‘isGPIO’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if ((returnCode == TPM_SUCCESS) && !isGPIO) {
^
tpm12/tpm_nvram.c: In function ‘TPM_Process_NVWriteValue’:
tpm12/tpm_nvram.c:2323:6: error: ‘isGPIO’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (!isGPIO) {
^
gcc -DHAVE_CONFIG_H -I. -I.. -include tpm_library_conf.h -I../include/libtpms -I../include/libtpms -fstack-protector-strong -DTPM_V12 -DTPM_PCCLIENT -DTPM_VOLATILE_LOAD -DTPM_ENABLE_ACTIVATE -DTPM_AES -DTPM_LIBTPMS_CALLBACKS -DTPM_NV_DISK -DTPM_POSIX -DTPM_NOMAINTENANCE_COMMANDS -O3 -DUSE_OPENSSL_FUNCTIONS_SYMMETRIC=1 -DUSE_OPENSSL_FUNCTIONS_EC=1 -DUSE_OPENSSL_FUNCTIONS_ECDSA=0 -DUSE_OPENSSL_FUNCTIONS_RSA=0 -Wall -Werror -Wreturn-type -Wsign-compare -Wno-self-assign -MT tpm12/libtpms_tpm12_la-tpm_process.lo -MD -MP -MF tpm12/.deps/libtpms_tpm12_la-tpm_process.Tpo -c tpm12/tpm_process.c -o tpm12/libtpms_tpm12_la-tpm_process.o
tpm12/tpm_process.c: In function ‘TPM_Process_GetCapabilitySigned’:
tpm12/tpm_process.c:5089:19: error: ‘transportEncrypt’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
returnCode = TPM_ProcessAudit(tpm_state,
^
tpm12/tpm_process.c: In function ‘TPM_Process_SetCapability’:
tpm12/tpm_process.c:5309:19: error: ‘transportEncrypt’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
returnCode = TPM_ProcessAudit(tpm_state,
^
tpm12/tpm_process.c: At top level:
gcc -DHAVE_CONFIG_H -I. -I.. -include tpm_library_conf.h -I../include/libtpms -I../include/libtpms -fstack-protector-strong -DTPM_V12 -DTPM_PCCLIENT -DTPM_VOLATILE_LOAD -DTPM_ENABLE_ACTIVATE -DTPM_AES -DTPM_LIBTPMS_CALLBACKS -DTPM_NV_DISK -DTPM_POSIX -DTPM_NOMAINTENANCE_COMMANDS -O3 -DUSE_OPENSSL_FUNCTIONS_SYMMETRIC=1 -DUSE_OPENSSL_FUNCTIONS_EC=1 -DUSE_OPENSSL_FUNCTIONS_ECDSA=0 -DUSE_OPENSSL_FUNCTIONS_RSA=0 -Wall -Werror -Wreturn-type -Wsign-compare -Wno-self-assign -MT tpm12/libtpms_tpm12_la-tpm_transport.lo -MD -MP -MF tpm12/.deps/libtpms_tpm12_la-tpm_transport.Tpo -c tpm12/tpm_transport.c -o tpm12/libtpms_tpm12_la-tpm_transport.o
tpm12/tpm_transport.c: In function ‘TPM_Process_ReleaseTransportSigned’:
tpm12/tpm_transport.c:2810:42: error: ‘t1TpmTransportInternal’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
returnCode = TPM_TransportLogOut_Extend(t1TpmTransportInternal->transDigest,
^
This patch initializes the variables.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
The -O3 passed to the ppc64el gcc-5 compiler on Ubuntu 16.04 causes
the following false positives:
gcc-5 -DHAVE_CONFIG_H -I. -I.. -include tpm_library_conf.h -I../include/libtpms -I../include/libtpms -fstack-protector-strong -DTPM_V12 -DTPM_PCCLIENT -DTPM_VOLATILE_LOAD -DTPM_ENABLE_ACTIVATE -DTPM_AES -DTPM_LIBTPMS_CALLBACKS -DTPM_NV_DISK -DTPM_POSIX -DTPM_NOMAINTENANCE_COMMANDS -g -O3 -fstack-protector-strong -DUSE_OPENSSL_FUNCTIONS_SYMMETRIC=1 -DUSE_OPENSSL_FUNCTIONS_EC=1 -DUSE_OPENSSL_FUNCTIONS_ECDSA=0 -DUSE_OPENSSL_FUNCTIONS_RSA=0 -Wall -Werror -Wreturn-type -Wsign-compare -Wno-self-assign -MT tpm12/libtpms_tpm12_la-tpm_session.lo -MD -MP -MF tpm12/.deps/libtpms_tpm12_la-tpm_session.Tpo -c tpm12/tpm_session.c -o tpm12/libtpms_tpm12_la-tpm_session.o
tpm12/tpm_session.c: In function ‘TPM_Process_SaveContext’:
tpm12/tpm_session.c:3056:16: error: ‘contextIndex’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
uint32_t contextIndex; /* free index in context list */
^
tpm12/tpm_session.c: In function ‘TPM_Process_SaveAuthContext’:
tpm12/tpm_session.c:4934:16: error: ‘contextIndex’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
uint32_t contextIndex; /* free index in context list */
^
This patch initializes these variables to 0.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
gcc (Ubuntu 9.2.1-21ubuntu1) 9.2.1 20191130
The gcc compiler on Ubuntu Focal reports several false positives for
potentially uninitialized variables:
tpm12/tpm_session.c: In function ‘TPM_Process_SaveContext’:
tpm12/tpm_session.c:3229:19: error: ‘tpm_auth_session_data’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
3229 | returnCode = TPM_AuthSessionData_Store(&r1ContextSensitive, tpm_auth_session_data);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tpm12/tpm_delegate.c: In function ‘TPM_Process_DelegateManage’:
tpm12/tpm_delegate.c:1787:49: error: ‘familyRow’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1787 | if ((opCode != TPM_FAMILY_CREATE) && (familyRow->flags & TPM_DELEGATE_ADMIN_LOCK)) {
| ~~~~~~~~~^~~~~~~
tpm12/tpm_delegate.c: In function ‘TPM_Process_DelegateUpdateVerification’:
tpm12/tpm_delegate.c:3575:48: error: ‘d1DelegateTableRow’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
3575 | d1DelegateTableRow->pub.verificationCount = familyRow->verificationCount;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
All of the variables are initialize under the same condition as they are
accessed.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This is a backport of 2da6f27c33.
Some TDES related marshalling and unmarshalling functions were
missing, so add them. Now TDES keys can be created.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This is a backport of e58cbdd4fd.
This patch fixes a bug described in the following TCG Document
ERRATA; Errata Version 1.9, August 23, 2019; For TCG Trusted Platform
Module Library; Family "2.0", Level 00, Revision 1.38, Sept 29, 2016
section 2.34: NV PIN Indices
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Fix a potential buffer overflow bug in the creation of filenames
that were using sprintf() rather than snprintf(). The buffer overflow
could occurr if the buffer is longer than 4096 bytes. The state path
may alone be 4096 bytes and could possibly trigger the overflow.
Swtpm for example is not affected from this since it uses the callbacks
that are invoked before the faulty function is called.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Check the size of the available data before hashing them. A minimum
of 20 bytes needs to be passed into the function so that we can hash
the data 'before' it.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reported-by: Yi Ren <yunye.ry@alibaba-inc.com>
