CPU_AP_DATA contains AP's information such as CpuHealthy and
VolatileRegisters. Exchange the whole CPU_AP_DATA buffer instead
some fields to make code more simple.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
CONFIDENTIAL_COMPUTING_GUEST_ATTR is not a simple SEV level anymore
and includes a feature mask since the previous commit.
Fix AmdMemEncryptionAttrCheck to check the level and feature
correctly and add DebugVirtualization support.
Since the actual feature flag is not set yet, this should cause
no behavioural change.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
---
Changes:
v5:
* "rb" from Tom
On the LoongArch platform:
the a0 register can be used as both a function parameter and a return value.
Due to parameter EFI_SYSTEM_CONTEXT being overwritten by an invalid context address,
when calling GetExceptionType, incorrect parameter address causes memory access exception.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4796
Cc: Chao Li <lichao@loongson.cn>
Signed-off-by: Dongyan Qian <qiandongyan@loongson.cn>
This patch fixes an error in calculating cache sizes for cores from
different Dies. The original code incorrectly cleared cache sizes for
different core types during intermediate calculation steps, leading to
mistakes in counting duplicate entries. This patch adds a check for
cache size to distinguish between different cache types.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: xieyuanh <yuanhao.xie@intel.com>
Update reference to SevSnpMsr.h as part of a refactor of MSR definitions and
SEV-SNP related defines. Remove family-specific references (filename) as these
defines are common to all modern EPYC Processors.
Signed-off-by: Paul Grimes <paul.grimes@amd.com>
Declares in the .inf file that the current component is an MM_STANDALONE
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is to fix issue when splitting leaf paging
entry in CpuPageTableLib code.
In previous code, before we assign the new child paging
structure address to the content of splitted paging entry,
PageTableLibSetPnle() is called to make sure the bit7 is
set to 0, which indicate the previous leaf entry is
changed to non-leaf entry now. There is a gap between
we change the bit7 and we assign the new child paging
structure address to the content of the splitted paging
entry. If the address of code execution or data access
happens to be in the range covered by the splitted paging
entry, this gap may cause issue.
In this patch, we prepare the new paging entry content
value in a local variable and assign the value to the
splitted paging entry at once. The volatile keyword
is used to ensure that no optimization will occur in
compilation.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Zhou Jianfeng <jianfeng.zhou@intel.com>
In this commit, change PeiMpLib to install callback
of gEdkiiEndOfS3ResumeGuid to relocate AP to new safe
buffer. The gEdkiiEndOfS3ResumeGuid is installed in
S3Resume.c before jmping to OS waking vector.
Previously, code in CpuS3.c of PiSmmCpuDxe driver will
prepare the new safe buffer for AP and place AP in hlt
loop state. With this code change, we can remove the
Machine Instructions of mApHltLoopCode in PiSmmCpuDxe.
Also we can reuse the related code in DxeMpLib for
PeiMpLib.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Move some code in DxeMpLib.C to common MpLib.c.
The related code is to relocate Ap to new safe buffer
before booting into OS. In next commits, these code
also will be used by PeiMpLib. This commit doesn't
change any code functionality.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Abstract some DxeMpLib code to function in this commit.
Some of these internal functions will be moved to common
MpLib.c in following commits. Then PeiMpLib can reuse
the code.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Disable paging in IA32 RelocateApLoop assembly
code to fix the issue that the AP page table is
unavailiable after boot OS under IA32 execution mode.
This issue exist in IA32 PEI + IA32 DXE normal boot
(also S3 boot with IA32 PEI after previous three commits
are accepted). In current MpLib code, the IA32 execution
mode code did not create page table in reserved memory
like what X64 code did. If PcdCpuStackGuard is TRUE, the
PG is enabled for AP in current RelocateApLoop assembly
code. And the page table for AP is unavailiable after
boot OS. This might cause potential issue. So disable PG
in IA32 RelocateApLoop.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4778
MPInitlib have wrong expectation that BSP index should always be 0 in
MpInitLibInitialize(), SwitchBsp(),ApWakeupFunction().
That will cause the data mismatch, if the initial BSP is not 0.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ning Feng <ning.feng@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Intel has some features need to use processor extended
information under CPU feature InitializeFunc(), so add code
to support it: This patch is to add CPU_V2_EXTENDED_TOPOLOGY
to get processor extended info.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Due to the definition difference of SMRAM Save State,
SmmBase config in SMRAM Save State for AMD is also different.
This patch provides the AmdSmmRelocationLib library instance
to handle the SMRAM Save State difference.
Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
This patch is to remove unnecessary CpuIndex.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch aims on mProcessorInfo global variable, which can be
defined as local variable in SmmRelocateBases(). With this patch,
no need to allocate the memory for all CPUs to store the
Processor Info.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Since SMM relocation is performed serially for each CPU, there is
no need to allocate buffers for all CPUs to store the SmBase
address in mSmBase and the Rebased flag in mRebased. A defined
global variable is sufficient.
This patch focuses on the mSmBase and mRebased global variables
to prevent unnecessary memory allocation for these variables.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch aims to rename global variables for clearer
association with Smm Init, ensuring their names are
distinct from those used in the PiSmmCpuDxeSmm Driver.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch just separates the smbase relocation logic from
PiSmmCpuDxeSmm driver, and moves to the SmmRelocationInit
interface. It maintains the original implementation of most
functions and leaves the definitions of global variables
intact. Further refinements to the code are planned for
subsequent patches.
Platform shall consume the interface for the smbase
relocation if need SMM support.
Note:
Before using SmmRelocationLib, the PiSmmCpuDxeSmm driver
allocates the SMRAM to be used for SMI handler and Save
state area of each processor from Smst->AllocatePages().
With SmmRelocationLib, the SMRAM allocation for SMI
handlers and Save state areas is moved to early PEI
phase (Smst->AllocatePages() service is not available).
So, the allocation is done by splitting the SMRAM out of
the SMRAM regions reported from gEfiSmmSMramMemoryGuid.
So, Platform must produce the gEfiSmmSMramMemoryGuid HOB
for SmmRelocationLib usage.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
ProcessorNumber 0 is not always BSP. Debug message based on 0
of ProcessorNumber is incorrect.
This patch is to clean the debug message in LmceSupport
directly.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
When running under an SVSM, the VMPL level of the APs that are started
must match the VMPL level provided by the SVSM. Additionally, each AP
must have a Calling Area for use with the SVSM protocol. Update the AP
creation to properly support running under an SVSM.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The RMPADJUST instruction is used to change the VMSA attribute of a page,
but the VMSA attribute can only be changed when running at VMPL0. To
prepare for running at a less priviledged VMPL, use the AmdSvsmLib library
API to perform the RMPADJUST. The AmdSvsmLib library will perform the
proper operation on behalf of the caller.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
In order to support an SEV-SNP guest running under an SVSM at VMPL1 or
lower, a new library must be created.
This library includes an interface to detect if running under an SVSM, an
interface to return the current VMPL, an interface to perform memory
validation and an interface to set or clear the attribute that allows a
page to be used as a VMSA.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
Currently, the first time an AP is started for an SEV-SNP guest, it relies
on the VMSA as set by the hypervisor. If the list of APIC IDs has been
retrieved, this is not necessary. The list of APIC IDs will be identified
by a GUIDed HOB. If the GUIDed HOB is present, use the SEV-SNP AP Create
protocol to start the AP for the first time and each time thereafter.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Add a new base library named CpuMmuLib and add a LoongArch64 instance
with in the library.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4734
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Co-authored-by: Dongyan Qian <qiandongyan@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Add the LoongArch64 CPU Timer instance to CpuTimerLib, using CPUCFG 0x4
and 0x5 for Stable Counter frequency.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4734
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Some of the order is not in alphabetical, reorder.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4726
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Some of the order is not in alphabetical, reorder.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4726
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Some of the order is not in alphabetical, reorder.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4726
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The GCD EFI_MEMORY_UC and EFI_MEMORY_WC memory attributes will be
supported when Svpbmt extension available.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
While UINTN defined for RISC-V 64 bits is UINT64, explictly using UINT64
for those variables that clearly are UINT64.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Add volatile qualifier to page table related variable to prevent
compiler from optimizing away the variables which may lead to
unexpected result.
Signed-off-by: Zhou Jianfeng <jianfeng.zhou@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Zhang Di <di.zhang@intel.com>
Cc: Tan Dun <dun.tan@intel.com>
Cc: Michael Brown <mcb30@ipxe.org>
Message-Id: <20240301025447.41170-1-jianfeng.zhou@intel.com>
Reviewed-by: Michael Brown <mcb30@ipxe.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: reconstruct commit manually, from corrupt patch email
on-list]
Some IN OUT parameters in CpuPageTableMap.c were mistakenly marked as IN.
"IN" replaced with "IN OUT" in the following interfaces:
PageTableLibSetPte4K(): Pte4K
PageTableLibSetPleB(): PleB
PageTableLibSetPle(): Ple
PageTableLibSetPnle(): Pnle
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhou Jianfeng <jianfeng.zhou@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20240222023922.29275-1-jianfeng.zhou@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move the WaitLoopExecutionMode and StartupSignalValue fields to a
separate HOB with the new struct.
WaitLoopExecutionMode and StartupSignalValue are independent of
processor index ranges; they are global to MpInitLib (i.e., the entire
system). Therefore they shouldn't be repeated in every MpHandOff GUID
HOB.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20240228114855.1615788-1-kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Oliver Steffen <osteffen@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
[lersek@redhat.com: turn the "Cc:" message headers from Gerd's on-list
posting into "Cc:" tags in the commit message, in order to pacify
"PatchCheck.py"]
After finding the BSP Number return the result instead of
continuing to loop over the remaining processors.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20240222160106.686484-7-kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: s/ASSERT (FALSE)/ASSERT_EFI_ERROR (EFI_NOT_FOUND)/ [Ray]]
Add support for splitting Hand-Off data into multiple HOBs.
This is required for VMs with thousands of CPUs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20240222160106.686484-6-kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: define one local variable per line [Ray]]
Loop over all MP_HAND_OFF HOBs instead of expecting a single HOB
covering all CPUs in the system.
Add a new FirstMpHandOff variable, which caches the first HOB body for
faster lookups. It is also used to check whenever MP_HAND_OFF HOBs are
present. Using the MpHandOff pointer for that does not work any more
because the variable will be NULL at the end of HOB loops.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Message-Id: <20240222160106.686484-5-kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Rename the MpHandOff parameter to FirstMpHandOff. Add loops so the
function inspects all HOBs present in the system.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20240222160106.686484-4-kraxel@redhat.com>
Rename the MpHandOff parameter to FirstMpHandOff. Add a loop so the
function inspects all HOBs present in the system.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20240222160106.686484-3-kraxel@redhat.com>
Rename the function to GetNextMpHandOffHob(), add MP_HAND_OFF parameter.
When called with NULL pointer return the body of the first HOB, otherwise
return the next in the chain.
Also add the function prototype to the MpLib.h header file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20240222160106.686484-2-kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4614
About the IsModified, current function doesn't consider that hardware
also may change the pagetable. The issue is that in the first call of
internal function PageTableLibMapInLevel, the function assume page
table is not changed, and add ASSERT to check. But hardware may change
the page table, which cause the ASSERT happens.
Fix the issue by adding addtional condition to only check if the page
table is changed when the software want to modify the page table.
Also, add more comment to explain this behavior.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Crystal Lee <CrystalLee@ami.com.tw>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
PageTableMap() only modifies the PageTable root pointer when creating from zero.
Explicitly explain it in function header.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
This commit is to reduce and optimize access to
attribute in CpuPageTableLib.
Unreasonable writing to attribute of page table may
leads to expection.
The assembly code for C code Pnle->Bits.Present =
Attribute->Bits.Present looks like:
and dword [rcx], 0xfffffffe
and eax, 0x1
or [rcx], eax
In case Pnle->Bits.Present and Attribute->Bits.Present
is 1, Pnle->Bits.Present will be set to 0 for short
time(2 instructions) which is unexpected. If some other
core is accessing the page, it may leads to expection.
This change reduce and optimize access to attribute of
page table, attribute of page table is set only when it
need to be changed.
Signed-off-by: Zhou Jianfeng <jianfeng.zhou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for AMD's new extended topology.
If processor supports CPUID 80000026 leaf then obtain
the topology information using new method.
Algorithm:
if CPUID is AMD:
then
check for AMD's extended cpu tology leaf.
if yes
then extract cpu tology based on
AMD programmer manual's instruction.
else
then fallback to existing topology function.
endif
endif
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Message-Id: <d93822d37fd25dafd32795758cf47263b432e102.1705549445.git.AbdulLateef.Attar@amd.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Check lower 24 bits of ProcessorNumber instead of
the value of ProcessorNumber in the API
MpInitLibGetProcessorInfo() of MpInitLibUp instance.
Lower 24 bits of ProcessorNumber contains the actual
processor number.
The BIT24 of input ProcessorNumber might be set to
indicate if the EXTENDED_PROCESSOR_INFORMATION will
be retrived.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Min Xu <min.m.xu@intel.com>
Message-Id: <20240108050804.1718-3-dun.tan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Set EXTENDED_PROCESSOR_INFORMATION to 0 in API
MpInitLibGetProcessorInfo() of MpInitLibUp. This
commit use ZeroMem() to set all fileds in output
EFI_PROCESSOR_INFORMATION to 0 before StatusFlag
field is reassigned.
Previously EXTENDED_PROCESSOR_INFORMATION in the API
MpInitLibGetProcessorInfo() of MpInitLibUp is ignored.
In PEI/DXE MpInitLib, EXTENDED_PROCESSOR_INFORMATION
will be retrived when BIT24 of input ProcessorNumber
is set. This commit can avoid garbage in the output
structure in MpInitLibGetProcessorInfo() of MpInitLibUp.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Min Xu <min.m.xu@intel.com>
Message-Id: <20240108050804.1718-2-dun.tan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Implements SmmCpuSyncLib Library instance. The instance refers the
existing SMM CPU driver (PiSmmCpuDxeSmm) sync implementation
and behavior:
1.Abstract Counter and Run semaphores into SmmCpuSyncCtx.
2.Abstract CPU arrival count operation to
SmmCpuSyncGetArrivedCpuCount(), SmmCpuSyncCheckInCpu(),
SmmCpuSyncCheckOutCpu(), SmmCpuSyncLockDoor().
Implementation is aligned with existing SMM CPU driver.
3. Abstract SMM CPU Sync flow to:
BSP: SmmCpuSyncReleaseOneAp --> AP: SmmCpuSyncWaitForBsp
BSP: SmmCpuSyncWaitForAPs <-- AP: SmmCpuSyncReleaseBsp
Semaphores release & wait during sync flow is same as existing SMM
CPU driver.
4.Same operation to Counter and Run semaphores by leverage the atomic
compare exchange.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is to complete 170d4ce8, sync the change to BaseXApicLib.
Checking the max cpuid leaf is not enough to figure whenever
CPUID_V2_EXTENDED_TOPOLOGY is supported. Intel SDM says:
Software must detect the presence of CPUID leaf 1FH by verifying
(a) the highest leaf index supported by CPUID is >= 1FH, and
(b) CPUID.1FH:EBX[15:0] reports a non-zero value.
The same is true for CPUID leaf 0BH.
This patch adds the EBX check to GetProcessorLocation2ByApicId(). The
patch also fixes the existing check in GetProcessorLocationByApicId() to
be in line with the spec by looking at bits 15:0. The comments are
updated with a quote from the Intel SDM.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Message-Id: <20231115111553.6592-2-jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Refine test case:
1. Check PAE paging reserved bits is zero.
2. Set stack as random value.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
The local variable OneOfPagingEntry is used before initialized, this
may cause reserved bit in page table entry is set especially in PAE
paging mode. The bug is random because it depends on the value in
stack.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
With SEV-SNP, the SEV-ES save area for a vCPU should be unique to that
vCPU. After commit 3323359a81, the VMSA allocation was re-used, but when
sorting the CPUs by APIC ID, the save area was not updated to follow the
original CPU. Similar to the StartupApSignal address, the SevEsSaveArea
address should be updated when sorting the CPUs.
This does not cause an issue at this time because all APs are in HLT state
and then are (re)started at the same time, with the same VMSA contents.
However, this should be fixed to account for any change in future
behavior.
Fixes: 3323359a81 ("UefiCpuPkg/MpInitLib: Reuse VMSA allocation to ...")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The CPUID_EXTENDED_TOPOLOGY CPUID leaf takes a subleaf as input when
returning CPUID information. However, the AsmCpuid() function does not
zero out ECX before the CPUID instruction, so the input leaf is used as
the sub-leaf for the CPUID request and returns erroneous/invalid CPUID
data, since the intent of the request was to get data related to sub-leaf
0. Instead, use AsmCpuidEx() for the CPUID_EXTENDED_TOPOLOGY leaf.
Fixes: d4d7c9ad5f ("UefiCpuPkg/MpInitLib: use BSP to do extended ...")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
No functional changes in this patch.
Updates the comments of _CPU_MP_DATA to delcared that duplications in
CpuMpData are present to avoid to be direct accessed and comprehended
in assembly code. CpuMpData: Intended for use in C code while
ExchangeInfo are used in assembly code in this module.
This patch deletes the unnecessary comments in CpuMpData, since
CpuMpData is no longer responsible for passing information from PEI to
DXE.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Laszlo Ersek lersek@redhat.com
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
This patch synchronizes the No-Execute bit in the IA32_EFER
register for the APs before the RestoreVolatileRegisters operation.
The commit 964a4f0, titled "Eliminate the second INIT-SIPI-SIPI
sequence," replaces the second INIT-SIPI-SIPI sequence with the BSP
calling the SwitchApContext function to initiate a specialized start-up
signal, waking up APs in the DXE instead of using INIT-SIPI-SIPI.
Due to this change, the logic for "Enable execute disable bit" in
MpFuncs.nasm is no longer executed. However, to ensure the proper setup
of the page table, it is necessary to synchronize the IA32_EFER.NXE for
APs before executing RestoreVolatileRegisters .
Based on SDM:
If IA32_EFER.NXE is set to 1, it signifies execute-disable, meaning
instruction fetches are not allowed from the 4-KByte page controlled by
this entry. Conversely, if it is set to 0, it is reserved.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek lersek@redhat.com
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Aim:
- To solve the assertion that checks if CpuMpData->FinishedCount
equals (CpuMpData->CpuCount - 1). The assertion arises from a timing
discrepancy between the BSP's completion of startup signal checks and
the APs' incrementation of the FinishedCount.
- This patch also ensures that "finished" reporting from the APs is as
later as possible.
More specifially:
In the SwitchApContext() function, the BSP trigers
the startup signal and check whether the APs have received it. After
completing this check, the BSP then verifies if the FinishedCount is
equal to CpuCount-1.
On the AP side, upon receiving the startup signal, they invoke
SwitchContextPerAp() and increase the FinishedCount to indicate their
activation. However, even when all APs have received the startup signal,
they might not have finished incrementing the FinishedCount. This timing
gap results in the triggering of the assertion.
Solution:
Instead of assertion, use while loop to waits until all the APs have
incremented the FinishedCount.
Fixes: 964a4f032d
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <20231025114216.2824-1-yuanhao.xie@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Checking the max cpuid leaf is not enough to figure whenever
CPUID_V2_EXTENDED_TOPOLOGY is supported. Intel SDM says:
Software must detect the presence of CPUID leaf 1FH by verifying
(a) the highest leaf index supported by CPUID is >= 1FH, and
(b) CPUID.1FH:EBX[15:0] reports a non-zero value.
The same is true for CPUID leaf 0BH.
This patch adds the EBX check to GetProcessorLocation2ByApicId(). The
patch also fixes the existing check in GetProcessorLocationByApicId() to
be in line with the spec by looking at bits 15:0. The comments are
updated with a quote from the Intel SDM.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2241388
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20231017112807.1244254-1-kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Introduce a PCD to control the maximum SATP mode that MMU allowed
to use. This PCD helps RISC-V platform set bare or minimum SATP mode
during bring up to debug memory map issue.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
attributes
Add Unit test of trrGetMemoryAttributesInMtrrSettings and
MtrrSetMemoryAttributesInMtrrSettings.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Improve MtrrDebugPrintAllMtrrsWorker by making use of
MtrrGetMemoryAttributesInMtrrSettings.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
MtrrGetMemoryAttributesInMtrrSettings parses the MTRR settings
either from hardware or from the parameter and returns an
array containing the memory cache types of all memory addresses.
This API could elinimate the needs of following APIs:
1. MtrrGetMemoryAttributeInVariableMtr
2. MtrrGetFixedMtrr
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Update APIs related to set memory attributes to handle the fixed MTRR
is not always supported.
There are 3 APIs in MtrrLib that can set memory attributes:
1. MtrrSetMemoryAttributesInMtrrSettings
2. MtrrSetMemoryAttributeInMtrrSettings
3. MtrrSetMemoryAttribute
The general idea applied in MtrrSetMemoryAttributesInMtrrSettings is:
1. MtrrLibPreMtrrChange saves the old MTRR default type which
contains bit to enable fixed MTRR.
2. Main logic in MtrrSetMemoryAttributesInMtrrSettings applies
memory attribute settings for below 1MB to variable MTRRs
if fixed MTRR is not supported.
3. MtrrLibPostMtrrChange unconditionally sets E bit in MTRR default
type MSR but only set FE bit when fixed MTRRs are modified.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Update UnitTestMtrrSetAllMtrrs() for the case that fixed MtrrLib
is not always supported.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Update MtrrSetAllMtrrs to not access fixed MTRRs if CPU doesn't
support them.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
UnitTestMtrrGetFixedMtrr updated for the case that fixed MtrrLib
is not always supported.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
IsMtrrSupported() return true when either fixed mtrr supported or
variable mtrr suppored. In this case, rather than checking whether
MTRR is supported or not, we should specifically check for fixed MTRR
support.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Update UnitTestMtrrGetAllMtrrs() for the case that fixed MtrrLib
is not always supported
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The patch fixes the following issues in the original implementation:
1. MtrrSetting contains random value if MTRR is not supported.
2. Unconditionally access fixed MTRR on CPU that may not support
fixed MTRR.
3. The maximum number of Variable MTRR entries are initialized, while
the portion exceeding the maximum number remains uninitialized.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Update UnitTestMtrrGetDefaultMemoryType for the case the when Fixed
MTRRs are not supported.
The original implementation returns FALSE when either fixed MTRR isn't
supported or the number of variable MTRRs is 0. The correct behavior
should return FALSE only when both fixed MTRR isn't supported and the
number of variable MTRRs is 0.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Update UnitTestGetFirmwareVariableMtrrCount for the case the when
Fixed MTRRs are not supported.
The original implementation returns FALSE when either fixed MTRR isn't
supported or the number of variable MTRRs is 0. The correct behavior
should return FALSE only when both fixed MTRR isn't supported and the
number of variable MTRRs is 0.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The previous implementation returns FALSE if either fixed MTRR is
unsupported or the number of variable MTRRs is 0. The correct behavior
is to return FALSE only when both fixed MTRR is unsupported and the
number of variable MTRRs is 0.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add internal function MtrrLibIsMtrrSupported and
update IsMtrrSupported to call the new internal function.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The implementation of this new behavior aligns with the guidelines
outlined in the Intel SDM.
Following a power-up or RESET of an MP system, system hardware
dynamically selects one of the processors on the system bus as the BSP.
The remaining processors are designated as APs. The APs complete a
minimal self-configuration, then wait for a startup signal (a SIPI
message) from the BSP processor.
Additionally, the MP protocol is executed only after
a power-up or RESET. If the MP protocol has completed and a
BSP is chosen, subsequent INITs (either to a specific processor or
system wide) do not cause the MP protocol to be repeated. Instead, each
logical processor examines its BSP flag (in the IA32_APIC_BASE MSR) to
determine whether it should execute the BIOS boot-strap code (if it is
the BSP) or enter a wait-for-SIPI state (if it is an AP).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add PcdFirstTimeWakeUpAPsBySipi to check if it is in the OVMF environment
and necessary to wake up APs by INIT-SIPI-SIPI.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add new API SendStartupIpiAllExcludingSelf(), and modify
SendInitSipiSipiAllExcludingSelf() by let it call the new API.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The purpose is to fix an issue where an exception occurs at the start
of the DXE phase by applying the following patch series on INTEL-based
systems.
UefiCpuPkg: Refactor the logic for placing APs in HltLoop.
UefiCpuPkg: Refactor the logic for placing APs in Mwait/Runloop.
UefiCpuPkg: Create MpHandOff.
UefiCpuPkg: ApWakeupFunction directly use CpuMpData.
UefiCpuPkg: Eliminate the second INIT-SIPI-SIPI sequence.
This series of patches makes changes to the way the APs are
initialized and woken up. It removes the 2nd time INIT-SIPI-SIPI and
introduces a special startup signal to wake up APs. These patches also
create a new HOB identified by the mMpHandOffGuid, which stores only the
minimum information required from the PEI phase to the DXE phase.
As a result, the original HOB (mCpuInitMpLibHobGuid) is now used only
as a global variable in the PEI phase and is no longer necessary in the
DXE phase for INTEL-based systems. The AMD SEV-ES related code
still relies on the OldCpuMpData in the DXE phase.
This patch decouple the SEV-ES functionality of assigning CpuMpData to
OldCpuMpData->NewCpuMpData from the Intel logic.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
During CpuDxe initialization, MMU will be setup with the highest
mode that HW supports.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
When both the PEI and DXE phases operate in the same execution
mode(32-bit/64-bit), the BSP send a special start-up signal during
the DXE phase to awaken the Application APs.
To eliminate the need for the INIT-SIPI-SIPI sequence at the beginning
of the DXE phase, the BSP call the SwitchApContext function to trigger
the special start-up signal. By writing the specified
StartupSignalValue to the designated StartupSignalAddress, the BSP
wakes up the APs from mwait mode. Once the APs receive the
MP_HAND_OFF_SIGNAL value, they are awakened and proceed to execute the
SwitchContextPerAp procedure. They enter another while loop,
transitioning their context from the PEI phase to the DXE phase.
The original state transitions for an AP during the procedure are as
follows:
Idle ----> Ready ----> Busy ----> Idle
[BSP] [AP] [AP]
Instead of init-sipi-sipi sequence, we make use of a
start-up signal to awaken the APs and transfer their context from
PEI to DXE. Consequently, APs, rather than the BSP, to set their state
to CpuStateReady.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
In the original design, once the APs finished executing their assembly
code and switched to executing C code, they would enter a continuous
loop within a function. In this function, they would collect CpuMpData
using the MP_CPU_EXCHANGE_INFO mechanism. However, in the updated
approach, CpuMpData can now be passed directly to the ApWakeUpFunction,
bypassing the need for MP_CPU_EXCHANGE_INFO. This modification is made
in preparation for eliminating the requirement of a second
INIT-SIPI-SIPI sequence in the DXE phase.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Initially, the purpose of the Hob was twofold: it served as a way to
transfer information from PEI to DXE. However, during the DXE phase,
only a few fields from the CPU_MP_DATA which collected in PEI phase were
needed. A new Hob was specifically created to transfer information
to the DXE phase. This new Hob contained only the essential fields
required for reuse in DXE. For instance, instead of directly including
the BspNumber in MpHandOff, the DXE phase introduced the use of
GetBspNumber() to collect the BspNumber from ApicID and CpuCount.
The SaveCpuMpData() function was updated to construct the MP_HAND_OFF
Hob. Additionally, the function introduced the MP_HAND_OFF_SIGNAL,
which solely served the purpose of awakening the APs
and transitioning their context from PEI to DXE. The
WaitLoopExecutionMode field indicated whether the bit mode of PEI
matched that of DXE. Both of them were filled only if the ApLoopMode
was not ApInHltLoop. In the case of ApInHltLoop, it remained necessary
to wake up the APs using the init-sipi-sipi sequence. This improvement
still allow INIT-SIPI-SIPI even APs are wait in Run/Mwait loop mode.
The function GetMpHandOffHob() was added to facilitate access to the
collected MpHandOff in the DXE phase. The CpuMpData in the DXE phase
was updated by gathering information from MpHandOff. Since MpHandOff
replaced the usage of OldCpuMpData and contained essential information
from the PEI phase to the DXE phase. AmdSevUpdateCpuMpData was included
to maintain the original implementation of AmdSev, ensuring that
OldCpuMpData->NewCpuMpData pointed to CpuMpData.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Refactor the logic for placing APs in
Mwait/Runloop into a separate function.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Refactor the logic for placing APs in HltLoop into a separate function.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
Removes SmmCpuFeaturesReadSaveStateRegister and
SmmCpuFeaturesWirteSaveStateRegister function from
SmmCpuFeaturesLib library.
MmSaveStateLib library replaces the functionality of the above
functions.
Platform old/new need to use MmSaveStateLib library to read/write save
state registers.
Current implementation supports Intel and AMD.
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
Implements MmSaveStateLib library interfaces
to read and write save state
registers for Intel processor family.
Moves Intel and AMD common functionality to common area.
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
Implements interfaces to read and write save state
registers of AMD's processor family.
Initializes processor SMMADDR and MASK depends
on PcdSmrrEnable flag.
Program or corrects the IP once control returns from SMM.
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
moves Intel-specific code to the arch-dependent file.
Other processor families might have different
implementation of these functions.
Hence, moving out of the common file.
Cc: Abner Chang <abner.chang@amd.com>
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The timer compare register is 64-bit so simplifying the delay
function.
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Update ProcTrace feature code to support enable collect performance
data by generating CYC and TSC packets. Add a new dynamic
PCD to indicate if enable performance collecting. In ProcTrace.c
code, if this new PCD is true, after check cpuid, CYC and TSC
packets will be generated by setting the corresponding MSR bits
feilds if supported.
Bugzila: https://bugzilla.tianocore.org/show_bug.cgi?id=4423
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Xiao X Chen <xiao.x.chen@intel.com>
Update code to support enable ProcTrace only on BSP. Add a new
dynamic PCD to indicate if enable ProcTrace only on BSP. In
ProcTrace.c code, if this new PCD is true, only allocate buffer
and set CtrlReg.Bits.TraceEn to 1 for BSP.
Bugzila: https://bugzilla.tianocore.org/show_bug.cgi?id=4423
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Xiao X Chen <xiao.x.chen@intel.com>
Because UefiCpuPkg/UefiCpuLib is merged to MdePkg/CpuLib and all modules
are updated to not depend on this library, remove it completely.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
UefiCpuPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
The CPU exception handler library code was rewritten at some point to
populate the vector code templates with absolute references at runtime,
given that the XCODE linker does not permit absolute references in
executable code when creating PIE executables.
This is rather unfortunate, as this prevents us from using strict
permissions on the memory mappings, given that the .text section needs
to be writable at runtime for this arrangement to work.
So let's make this hack XCODE-only, by setting a preprocessor #define
from the command line when using the XCODE toolchain, and only including
the runtime fixup code when the macro is defined.
While at it, rename the Xcode5ExceptionHandlerAsm.nasm source file and
drop the Xcode5 prefix: this code is used by other toolchains too.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
