Code can have problems reading empty messages, check we can
handle it.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe de Dinechin <dinechin@redhat.com>
Handle capabilities from guest device.
Send capability to the guest when device is opened.
Currently there's no capabilities set on the message sent.
On the tests we need to discard the capability message before
reading the error.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe de Dinechin <dinechin@redhat.com>
The name 'com.redhat.stream.0' is too generic and in no way denotes it
belongs to SPICE. It is preferred to have the project's domain in the
name and Red Hat doesn't own the project. Rename it to
org.spice-space.stream.0.
Signed-off-by: Lukáš Hrázký <lhrazky@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
The timeout is too short when the test run under Valgrind
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
These factor a bit of common code, and more importantly, help with
freeing all event loop related data at the end of each test.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
This test case will be testing the external spice-server API to
configure the address/port it's listening on. For now it sets up a
listening server, spawns a thread which is going to connect to that
port, and check it gets the REDQ magic upon connection. It will be
extended to test for Unix sockets, TLS sockets, ...
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
There is currently a debug printf which is always shown when a mainloop
event is triggered. This is unlikely to be useful unless one is
debugging the event loop code.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Test case for the issue fixed by previous commit.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Due to the way Qemu handle the device, when an error occurs we must consume
all pending data inside the callback which reads data from the device.
If we don't flush this data, the next time spice-server tries to read from
the device (after the guest closes/reopens it), we'll be getting stale
data. This can happen because we cannot prevent the guest from writing to
the device even after it got in an error state.
This needs to be done within this callback, as QEMU returns 0 if you call
SpiceCharDeviceInterface::read() outside of it. QEMU invokes this callback
through a call to spice_server_char_device_wakeup.
On the test now we must test that we receive an error from the device.
Previously we checked that last part of the data was not read. Now
potentially all data are read, so we need another way to check the device
detected the error.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Test all batched (send together) messages are handled correctly
and device is not stuck.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Qemu does not trigger a new data read if we don't read all data in
the buffer.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
clang reports may warnings like:
test-display-base.c:252:11: error: cast from 'uint8_t *' (aka 'unsigned char *') to 'uint32_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
dst = (uint32_t *)bitmap;
^~~~~~~~~~~~~~~~~~
Use SPICE_ALIGNED_CAST/SPICE_UNALIGNED_CAST macros in common/mem.h to
mark the cast safe or possibly unsafe.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Not really possible but clang raise these warnings:
test-sasl.c:555:13: error: variable 'is_ok' is uninitialized when used here [-Werror,-Wuninitialized]
if (is_ok) {
^~~~~
test-sasl.c:553:22: note: initialize the variable 'is_ok' to silence this warning
uint8_t is_ok;
^
= '\0'
test-gst.c:792:18: error: variable 'height' is used uninitialized whenever '&&' condition is false [-Werror,-Wsometimes-uninitialized]
spice_assert(gst_structure_get_int(s, "width", &width) &&
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../spice-common/common/log.h:91:17: note: expanded from macro 'spice_assert'
if G_LIKELY(x) { } else { \
^
/usr/include/glib-2.0/glib/gmacros.h:376:60: note: expanded from macro 'G_LIKELY'
^~~~
/usr/include/glib-2.0/glib/gmacros.h:370:8: note: expanded from macro '_G_BOOLEAN_EXPR'
if (expr) \
^~~~
test-gst.c:799:17: note: uninitialized use occurs here
bitmap->y = height;
^~~~~~
test-gst.c:792:18: note: remove the '&&' if its condition is always true
spice_assert(gst_structure_get_int(s, "width", &width) &&
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../spice-common/common/log.h:91:17: note: expanded from macro 'spice_assert'
if G_LIKELY(x) { } else { \
^
/usr/include/glib-2.0/glib/gmacros.h:376:60: note: expanded from macro 'G_LIKELY'
^
/usr/include/glib-2.0/glib/gmacros.h:370:8: note: expanded from macro '_G_BOOLEAN_EXPR'
if (expr) \
^
test-gst.c:791:23: note: initialize the variable 'height' to silence this warning
gint width, height;
^
= 0
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Marked as obsolete with clang and some options is detected as
error.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
This call sequence is included in test-display-base used in different
tests, no reason to have this test.
Also this test is not actually used for automated tests.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Some additional header are needed to avoid undefined types.
SOL_TCP and IPPROTO_TCP have the same value in Linux but SOL_TCP
is not defined in FreeBSD.
Provide pthread_setname_np using pthread_set_name_np (same parameters).
Patch is based on a patch from Oleg Ginzburg <olevole@olevole.ru>
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Marked as obsolete with clang and some options is detected as
error.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Uri Lublin <uril@redhat.com>
The server on failure can just disconnect the client or report the
error. The error report can be done using new protocol 2 or just
a number (like protocol 1).
Detect the failure report to make possible to check it.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Use some flags to specify which behaviour to change and different test
cases to test them.
Some cases specify when client stop sending data at different steps of
the process.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Try different connections with different tricky names.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Create a thread that emulates a client and starts SASL authentication
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Check some functions are called in a given sequence.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Not currently working, is defining SASL functions used by the code.
As the symbols defined in the objects have more priority than the ones
defined by the libraries these function take precedence compared to
system library.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
These cast causes warnings if a 32 bit target is used.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Network fields should be encoded as little endian.
This was discovered using an emulated MIPS machine.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Coverity complains the field is not initialized.
That's true but man recvmsg specifies that this
field is set by recvmsg.
To make coverity happy, initialize this field.
Signed-off-by: Uri Lublin <uril@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
There are a few places which use $(top_srcdir) when $(srcdir) would be
equally valid.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
verify guarantee that the condition is always a compile
time constant.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Current code does not free allocated tablet resources.
When a tablet is added some resources are allocated.
Resources should be released either removing the tablet or
freeing spice server object.
Added a test to check these conditions.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Currently create device, open it and pass some messages checking
they are handled.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
common/mem.h contains mainly memory allocation functions.
As we decided to move to Glib calls directly avoid to include
function declaration we should not use anymore.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
The objects RedsStream and RedsSASL are currently using the namespace
"Reds" rather than the standard "Red" namespace used throughout the rest
of the project. Change these to be consistent. This also means changing
method names and some related enumeration types.
The files were also renamed to reflect the change:
reds-stream.[ch] -> red-stream.[ch]
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Currently, the port used by most tests is hardcoded to 5912. However,
the test suite can be run in parallel, so if 2 tests run in parallel,
the 2nd one is not going to be able to bind to port 5912 and will fail.
After this commit, test_new() will try to find a free port between 5912
and 5922 and will abort if it can't find any.
The issue can be reproduced by adding a usleep(1000000) to the beginning
of test_destroy().
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
All main test module have this test-XXXX.c naming, make
test-stat coherent.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Put non-trivial programs in separate sections, which makes it easier to
understand the relationship between macros.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
New automake test harness produce *.log and *.trs files for
each test.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
In case GLib don't provide these functions we use replacements so
there's no need to have a warning if these functions are called.
This potentially capture other compatibility issues in the tests
that would be ignored having all deprecation warnings disabled.
Tested with GLib 2.28 and 2.52.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Pipelines are never freed.
These are detected as leaks by leak detector tools like address sanitizer.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Command line options are not freed at the end of the program.
These are detected as leaks by leak detector tools like address sanitizer.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
encoder_name is never NULL as already initialized with "mjpeg" value.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Currently is possible to trigger a leak by passing an invalid
connection.
This can happen if the client opens a connection and then closes it
without writing or reading any data.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
This test runs 2 spice server in one program.
Use two different tcp port to be able to connect to both servers.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Add some check that something happened during creation/destruction.
Set as running on "make check".
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Update tests names.
Remove tetris comments, never available and not planned.
Update some notes.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
There's no need to not compile this feature, it just enable
a parameters which must be passed in order to change test
behaviour.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
This allows to end the loop to end some tests.
Currently different tests enter the loop but never exit from
them.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
In C the sizeof(long) can be different than sizeof(void*),
use proper type.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Do not use calloc and malloc directly without checking
the result. Use instead spice functions to get a nice
error in case of allocation failures.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
For some reasons (documented in cursor_init) the function
uses 128 extra bytes of data causing a reading buffer overflow.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Timers in spice server are supposed to be used in a single thread
context. To avoid problems, protect the usage from multiple
thread with a mutex.
This sometimes caused a crash.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
The wakeup timer is used by the worker thread and by the
main thread.
Destroying the object before destroying the worker thread
can lead to use after free.
Destroying the worker thread first makes sure we don't race.
This is detected easily when compiling the test with address sanitizer.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
As the indexes are used to compute the index inside an array
using modulo operation when a signed value overflows, the
modulo becames negative, causing a buffer underflow.
Unlikely to happens (take lot of time) but is safer that way.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
When compiling, -Werror=missing-field-initializers is enabled.
However, some gcc versions (like Gentoo 4.9.4 one) fail to see
that all the members of the SpiceBaseInterface struct are
initialized:
test-display-base.c:844:5: error: missing initializer for field
'description' of 'SpiceBaseInterface'
[-Werror=missing-field-initializers] .base.description = "test
spice virtual channel char device",
The solution is to initialize .base member as a structure at once
instead of multiple times per each member.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Reverse return values of the various bool methods so that 'true' means
success, and 'false' failure rather than the opposite.
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Doing a memset(0) on a SpiceStatNode does not create an empty/unattached
node, but instead creates a node '0'. This node could be non-existing,
or totally unrelated.
This patch creates a default '0' node as soon as the file is created.
This will make the behaviour of 0-filled nodes more in line with what
one would expect.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Stress a bit video encoders.
This check different combination of
- encoder type;
- image formats;
- image clipping (encoding partial frames);
- handling frames split into chunks.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Pavel Grunt <pgrunt@redhat.com>
As pointed out by danpb, tests/pki/server-cert.pem is only valid until
Fri Nov 29 15:51:44 UTC 2019
This changes tests/pki/server-cert.pem and tests/pki/ca-cert.pem to be
valid until 2048. These certificates were generated using the
instructions on https://www.spice-space.org/page/SSLConnection
The -subj args were omitted, and the defaults suggested by openssl used.
The -days parameter was changed to -days 10950.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This allows to run automatically our test-suite with valgrind to test
for memory leaks.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
test-qxl-parsing is really a series of several tests. Porting it to
GTest makes this more obvious. This also has the side-effect of making
it more friendly to 'make check-valgrind' (which would fail on SIGALRM,
and on unexpected g_warning()).
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Verify stuff are freed correctly (like TLS context).
The different PKI file required are generated with
base values (localhost and rsa 1024).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Add and remove some vmc device to check for leaking.
These combination assure that currently implemented type
of devices (webdav, usb and generic) are checked.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Instead of disabling the code use the compatibility functions.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Watch was added but never removed.
The added basic_event_loop_destroy() addition allows to see that
this leak is gone).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
This switches the test to using the GTest API, and add several tests
related to https://bugzilla.redhat.com/show_bug.cgi?id=1411194
This uses some API not available in glib 2.28, so this checks we have a
new enough glib before building this test, and disables warnings when
using too new glib API when building it.
The "multiple-vmc-devices" is based off code written by Frediano Ziglio.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This allows to chain several test cases by using
test_new()/test_destroy().
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Pavel Grunt <pgrunt@redhat.com>
This is a revert of b76e561d.
For a SpicePlaybackInstance, the base interface must be a
SpicePlaybackInterface instance, not a SpiceBaseInterface instance, or
spice-server code will end up reading out of bounds.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This is a revert of 93b4f4050^ and 93b4f4050.
For a SpiceCharDeviceInstance, the base interface must be a
SpiceCharDeviceInterface instance, not a SpiceBaseInterface instance, or
spice-server code will end up reading out of bounds.
vmc_state/vmc_write/vmc_read implementations also have to be provided.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This is a revert of 93b4f4050^ and 93b4f4050.
For a SpiceCharDeviceInstance, the base interface must be a
SpiceCharDeviceInterface instance, not a SpiceBaseInterface instance, or
spice-server code will end up reading out of bounds.
vmc_state/vmc_write/vmc_read implementations also have to be provided.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
