This should always be defined and including config.h is a requirement.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Rather than having an API to register client callbacks for each channel
type, make them vfuncs.
Since the client callbacks are registered identically for each channel
of the same type, it doesn't make sense for to require these to be
registered separately for each object. It's cleaner to have these be
per-class properties, so they've been converted to virtual functions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
No reasons to expose red_qxl_is_running, this was used to not
send capability is the state was not running.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Currently channel threading/handling is spread between RedQxl,
RedWorker and RedChannel.
Move more to RedChannel simplify RedQxl and RedWorker.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
For the Display Channel and the Cursor channel, move the call to
reds_register_channel() to the _constructed() vfunc rather than calling
it explicitly from RedWorker. This matches what other channels do.
Acked-by: Frediano Ziglio <fziglio@redhat.com>
The difference is subtle but compared to what client receives, this
could help identify values set to the wrong head, e.g:
First we received:
| display-channel.c:180:monitors_config_debug: monitors config count:2 max:4
| display-channel.c:184:monitors_config_debug: +0+0 1015x805
| display-channel.c:184:monitors_config_debug: +1015+0 1024x740
And then:
| display-channel.c:180:monitors_config_debug: monitors config count:3 max:4
| display-channel.c:184:monitors_config_debug: +0+0 1015x805
| display-channel.c:184:monitors_config_debug: +0+0 0x0
| display-channel.c:184:monitors_config_debug: +1015+0 1024x740
In the first debug it would be helpful to have "head 0" and "head 1",
to point out the temporary error in monitor's config message.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Now that we have a refcounted RedSurfaceCmd, we can store the command
itself in DisplayChannel rather than copying QXLReleaseInfoExt. This
will let us move the release of the QXL guest resources in red-parse-qxl
in the next commit.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Most of pipe items use this name for the base field.
This also allows to use SPICE_UPCAST macros instead of a long
SPICE_CONTAINEROF.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Removes debug messages that are logged on every draw, spamming the log
excessively when debugging.
Signed-off-by: Lukáš Hrázký <lhrazky@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Reuse option from common code.
Also reuse spice_extra_checks constant instead of using the preprocessor
macro directly.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Eduardo Lima (Etrunko) <etrunko@redhat.com>
Qemu never used more than this number and today surfaces are not
much used so there's no reason to keep this limit so high.
This reduces quite a lot some internal structure
(DisplayChannelPrivate and DisplayChannelClientPrivate).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This header is mainly exporting functions to handle public
interface for the QXL devices.
Avoid spreading its inclusion including this header in other
headers.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Just to avoid confusion between different uses of the word Stream (e.g.
RedStream) clarify that it's related to video streams
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
To prevent confusion between Stream (a video stream) and RedStream (a
generic data stream between client and server), change the name to
VideoStream to be more explicit about what it is.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This reduce the attack surface moving some data into read-only
sections.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Start reducing the usage of spice_new*/spice_malloc allocations.
They were designed in a similar way to GLib ones.
Now that we use GLib make sense to remove them.
However the versions we support for GLib can use different memory
allocators so we have to match g_free with GLib allocations
and spice_* ones (which uses always malloc allocator) with free().
This patch remove some easy ones.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Now the push is done automatically when a PipeItem is added
(cfr commit 5c460de1a3
"worker: push data when clients can receive them"),
forcing a push cause only network fragmentation and is required
only if you are handling data in a loop instead of using the
default loop.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
This vfunc only has a RedChannelClient * argument, and most of the time,
it operates on RedChannelClient, not on RedChannel. Moreover, the only
time it's used is from RedChannelClient. This commit moves the vfunc to
RedChannelClient, which seems like a better fit for it.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
The leak detector we use currently is not enough to detect
some kind of leak in DisplayChannel so manually test.
These tests are enabled only when --enable-extra-checks is passed
to configure.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
RedWorker should not handle directly to client but
defer the job to DisplayChannel.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
To help avoid stream.c and dcc.c to access display-channel private
structure to get the nth Stream structure pointer.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
This is causing issues with potential improvements to the logging
system, and I've always found this usage a bit odd anyway.
Using spice_debug(""); was not possible as this triggers
-Wformat-zero-length warnings from our use of -Wall.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
When a guest is rebooted, the QXL driver gets unloaded at some point in
the reboot process. When the driver is unloaded, the spice server sets a
single flag to FALSE: RedWorker::driver_cap_monitors_config. This flag
indicates whether the driver is capable of sending its own monitors config
messages to the client.
The only place this flag is used is when a new primary surface is created. If
this flag is true, the server assumes that the driver will send its own
monitors config very soon after the surface is created. If it's false, the
server directly sends its own temporary monitors config message to the client
based on the size of the just-created primary surface. This temporary monitors
config message always has a maximum monitor count of 1.
This flag is set to false at startup so that in early boot (e.g. vga text
mode), the server will send out these 'temporary' monitor config messages to
the client whenever the primary surface is destroyed and re-created. This
causes the client to resize its window to match the size of the guest. When the
QXL driver is loaded and starts taking over the monitors config
responsibilities, we set this flag to true and the server stops sending
monitors config messages out on its own.
If we reboot and set this flag to false, it will result in the server sending a
monitors config message to the client indicating that the guest now supports a
maximum of 1 monitor. If the guest happens to have more than one display window
open, it will destroy those extra windows because they exceed the maximum
allowed number of monitors. This means that if you reboot a guest with 4
monitors, after reboot it will only have 1 monitor.
To avoid this, we assume that if we had the ability to support multiple
monitors at some point, that will return at some point. So when the server
constructs its own monitors config message to send to the client (when the
driver_cap_monitors_config flag is false), we send the previous maximum monitor
count instead of always sending a maximum of 1.
Resolves: rhbz#1274447
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This is a particularly opaque part of the code for managing pending
Drawable operations. This patch adds documentation atempting to explain
these functions.
- glz_enc_dictionary_reset
- monitors_config_new
- red_channel_any_blocked
- red_channel_no_item_being_sent
- red_client_get_channel
are only used in the file where they are defined, so they can as well be
static.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
The code that manages pending QXL Drawable operations is fairly complex
and difficult to understand. This is an attempt to start documenting
that code to save time when we have to work on this code in the future.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This commit changes all functions returning TRUE/FALSE from having an
'int' return value to 'bool'.
This way it's obvious that such a function is not going to return
anything else than TRUE or FALSE.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
config_socket is configuring the client stream socket.
As is responsibility of RedChannelClient to handle the stream
it make more sense to have the function in this object.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
[0] SPICE_MSGC_DISPLAY_PREFERRED_VIDEO_CODEC_TYPE
This message provides a list of video codecs based on client's order
of preference.
We duplicate the video codecs array from reds.c and sort it using the
order of codecs as reference.
This message will not change an ongoing streaming but it could change
newly created streams depending the rank value of each video codec
that can be set by spice_server_set_video_codecs()
Signed-off-by: Victor Toso <victortoso@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Using spice_info() gets in the way of tests using
g_test_expect_message() as all the messages emitted using
a non-debug log level must be listed as expected, otherwise we get a
critical about an expected message not having been logged.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Use new structures and functions to implement the statistics code.
Use inline functions instead of macros for increased type-safety.
If statistics are disabled, the structures and functions become
empty. This confines the configuration-specific #defines to the
statistics implementation itself and avoids the need for #defines in
the calling functions. This greatly reduces the chance of accidentally
breaking the build for one configuration or the other. The reds option
was removed from stat_inc_counter() as it was not used.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
red_channel_client_parse() currently does roughly:
if (klass->parser) {
parsed = klass->parser(msg, msg_size, &parsed_size);
klass->handle_parsed(rcc, parsed_size, msg_type, parsed);
} else {
klass->handle_message(rcc, msg_type, msg, msg_size);
}
The handle_parsed implementation expects a void * 'parsed' argument,
which will then be cast to the correct type. There is not really a need
to provide distinct handle_parsed/handle_message vfuncs, instead we can
say that if a RedChannel subclass provides a 'parser' vfunc, then it's
'handle_message' vfunc will be called with the parsed message, otherwise
it will be called with unparsed data (ie what handle_message currently
expects).
This makes the code slightly easier to follow as messages will always be
handled by the same vfunc.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This field is used only for debugging.
Remove it reducing a bit all these "current" fields around.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
It shadows the outer one.
Renamed also the outer 'container' variable.
Signed-off-by: Uri Lublin <uril@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
