It was sending the wrong data, the memory right after the VCSMsgHeader
which was actually not where the data was.
Fixed by having the header and data (VSCError, 4 bytes of the error code)
embedded in the ErrorItem pipe item.
when changing resolutions due to the new async code paths the surface
creation command was kept by reference, and later, when the red_worker
signaled completion by calling async_complete the mouse mode was updated
using the reference. This caused the wrong values to be read resulting in wrong
resolutions set and a non working mouse pointer. Fix this by keeping a copy of
the surface creation command instead of a reference.
No bz. Found in testing.
On migration, destroy_surfaces is called from qxl (qxl_hard_reset), before the device was loaded (on destination).
handle_dev_destroy_surfaces led to red_process_commands, which read the qxl command ring
(which appeared to be not empty), and then when processing the command
it accessed unmapped memory.
This does the following, all to remove any referenced memory on the pci bars:
flush_all_qxl_commands(worker);
flush_all_surfaces(worker);
red_wait_outgoing_item((RedChannel *)worker->display_channel);
red_wait_outgoing_item((RedChannel *)worker->cursor_channel);
The added api is specifically async, i.e. it calls async_complete
when done.
(cherry picked from commit 2a4d97fb78)
The new _ASYNC io's in qxl_dev listed at the end get six new api
functions, and an additional callback function "async_complete". When
the async version of a specific io is used, completion is notified by
calling async_complete, and no READY message is written or expected by
the dispatcher.
update_area has been changed to push QXLRects to the worker thread, where
the conversion to SpiceRect takes place.
A cookie has been added to each async call to QXLWorker, and is passed back via
async_complete.
Added api:
QXLWorker:
update_area_async
add_memslot_async
destroy_surfaces_async
destroy_primary_surface_async
create_primary_surface_async
destroy_surface_wait_async
QXLInterface:
async_complete
(cherry picked from commit 096f49afbf)
In addition (1) make handle_dev_destroy_surfaces call red_release_cursor
(2) call red_wait_outgoing_item(cursor_channel) only after adding msgs to pipe
[3d3066b175 cherry-pick with modifications]
In C, the latter isn't a prototype for a function with no arg,
but declares a function with an undefined number of args.
[picked from master with changes since no main_channel, spice_common,
and a bunch of functions aren't there yet]
For each callback in QXLWorker, for example QXLWorker::update_area, add
a direct call named spice_qxl_update_area.
This will (a) remove the pointless indirection and (b) make shared
library versioning alot easier as we'll get new linker symbols which
we can tag with the version they appeared in the shared library.
[cherry-picked from master]
When qemu creates a channel, reds.c contains code to check the
minor/major channel versions known to QEMU (ie the ones that were
current in spice-server when QEMU was compiled) and to compare these
versions against the current ones the currently installed spice-server
version.
According to kraxel [1], the rules for these interface numbers are:
"The purpose of the versions is exactly to avoid the need for a new
soname. The rules are basically:
(1) You add stuff to the interface, strictly append-only to not break
binary compatibility.
(2) You bump the minor version of the interface.
(3) You check the minor version at runtime to figure whenever the
added fields contain valid stuff or not.
An example is here (core interface, minor goes from 2 to 3, new
channel_event callback):
http://cgit.freedesktop.org/spice/spice/commit/?id=97f33fa86aa6edd25111b173dc0d9599ac29f879
"
The code currently refuses to create a channel if QEMU minor version is
less than the current spice-server version. This does not correspond
to the intended behaviour, this patch changes to fail is qemu was compiled
with a spice-server that is *newer* than the one currently installed. This
case is something we cannot support nicely.
[1] http://lists.freedesktop.org/archives/spice-devel/2011-July/004440.html
red_pipe_add_drawable can lead to removal of drawables from current tree
(since it calls red_handle_drawable_surfaces_client_synced), which can
also lead to releasing these drawables.
Before the fix, red_current_add_equal, called red_pipe_add_drawable,
without assuring afterwards that the drawables it refers to are still alive or
still in the current tree.
red_handle_drawable_surfaces_client_synced was called only from red_pipe_add_drawable, while it
should also be called from red_pipe_add_drawable_after. Otherwise, the client
might receive a command with a reference to a surface it doesn't hold and crash.
When the worker was stoped, the cursor was copied from guest ram to the host ram,
and its corresponding qxl command was released.
This is unecessary, since the qxl ram still exists (we keep references
to the surfaces in the same manner).
It also led to BSOD on guest upon migration: the device tracks cursor set commands and it stores
a reference to the last one. Then, it replays it to the destination server when migrating to it.
However, the command the qxl replayed has already been released from the pci by the original
worker, upon STOP.
Conflicts:
server/red_worker.c
According to spice.proto the smartcard channel can receive acks and any
other message defined in BaseChannel. While the spicec implementation didn't
send an ACK spice-gtk does, so handle it.
We introduce 2 public functions to integrate with the library user.
spice_server_set_sasl() - turn on SASL
spice_server_set_sasl_appname() - specify the name of the app (It is
used for where to find the default configuration file)
The patch for QEMU is on its way.
https://bugs.freedesktop.org/show_bug.cgi?id=34795
Conflicts:
server/reds.c
server/reds.h
Try to have a common base dispose() method for channels. For now, it
just free the caps.
Make use of it in snd_worker, and in sync_write() - sync_write() is
going to have default caps later on.
https://bugs.freedesktop.org/show_bug.cgi?id=34795
This is stylish change again. We are talking about a RedStream object,
so let's just name the variable "stream" everywhere, to avoid
confusion with a non existent RedPeer object.
https://bugs.freedesktop.org/show_bug.cgi?id=34795
This patch make it easier to spot warnings in compilation. It should
work with older versions of automake that don't support silent rules.
If you want verbose build, make V=1.
Signed-off-by: Uri Lublin <uril@redhat.com>
https://bugs.freedesktop.org/show_bug.cgi?id=34795
This patch adds symbol versions to the spice server library. Each
symbol which is exported by libspice-server gets tagged with the
(stable) version where it appeared first. This way the linker and rpm
are able to figure which version of the spice-server libary is required
by a particular qemu binary/package.
[ 0.8 branch: drop 0.10 symbols from list ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The check this patch removes causes us to not set vdagent to NULL, nor
update the mouse mode when the guest agent disconnects when no client is
attached. Which leads to a non working mouse, and on agent reconnect a
"spice_server_char_device_add_interface: vdagent already attached" message
instead of a successful re-add of the agent interface .
This ensures that if the client or agent connects to the client-agent
"tunnel" while the other side is halfway through sending a multi part
message, the rest of the message gets discarded, and the connecting
party starts getting data at the beginning of the next message.
