red_channel_disconnect_if_pending_send() and red_channel_wait_all_sent() are
always called together, we can remove one of the 2 methods.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Cursor resources (basically the shape of it) was retained till
it was used however it was copied so there were no reason to not release
this resource.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
RedPipeItem already implements reference counting so
this avoid duplicating code to handle a object with reference
counting that points to another object with reference counting
that holds a RedCursorCmd.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
cursor_channel_disconnect() calls
cursor_channel_client_reset_cursor_cache() on all CursorChannelClient
associated with the current CursorChannel before calling
red_channel_disconnect().
red_channel_disconnect() will iterate over all CursorChannelClient
calling red_channel_client_disconnect(), which will eventually call
CursorChannelClient::on_disconnect. This will in turn
cursor_channel_client_reset_cursor_cache(), so calling it in
cursor_channel_disconnect() before calling red_channel_disconnect() is
redundant.
cursor_channel_disconnect() can thus be replaced by a direct call to
red_channel_disconnect().
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This vfunc only has a RedChannelClient * argument, and most of the time,
it operates on RedChannelClient, not on RedChannel. Moreover, the only
time it's used is from RedChannelClient. This commit moves the vfunc to
RedChannelClient, which seems like a better fit for it.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
If you are testing for NULL data this means that variable could be
NULL so avoid to access before the check to make sure the check is hit.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
When a RedCursorCmd is passed to cursor_channel_process_cmd(), it
constructs a new CursorItem which takes ownership of that command. If
the cursor_cmd->type falls through to the default case of the switch
statement, we will print a warning and return without freeing the
CursorItem (and thus the RedCursorCmd).
Acked-by: Frediano Ziglio <fziglio@redhat.com>
In the past CursorItem structure was stored in
RedCursorCmd::device_data field so the check was there to check if the
structure fit into that field.
Since 2ba69f9f88
("libspice: add surface 0 support") the structure is no more stored in
the field so there's no reason for this check causing only confusion.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
The variable is used to store a boolean type.
Update style for this boolean variable.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Pavel Grunt <pgrunt@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
For each channel there are two set of capabilities, one
for the common ones and one for the specific ones.
A single set were almost always passed using 2 arguments,
a number of elements and an array but then before using
these were converted to a GArray.
Use a single structure (already available) to pass all
channel capabilites using a single argument.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Using spice_info() gets in the way of tests using
g_test_expect_message() as all the messages emitted using
a non-debug log level must be listed as expected, otherwise we get a
critical about an expected message not having been logged.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
red_channel_client_parse() currently does roughly:
if (klass->parser) {
parsed = klass->parser(msg, msg_size, &parsed_size);
klass->handle_parsed(rcc, parsed_size, msg_type, parsed);
} else {
klass->handle_message(rcc, msg_type, msg, msg_size);
}
The handle_parsed implementation expects a void * 'parsed' argument,
which will then be cast to the correct type. There is not really a need
to provide distinct handle_parsed/handle_message vfuncs, instead we can
say that if a RedChannel subclass provides a 'parser' vfunc, then it's
'handle_message' vfunc will be called with the parsed message, otherwise
it will be called with unparsed data (ie what handle_message currently
expects).
This makes the code slightly easier to follow as messages will always be
handled by the same vfunc.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This third argument (and the 'item' member of
RedChannelClient::priv::send_data) was a somewhat roundabout way to keep
the RedPipeItem alive until a message is sent, just in case some data
owned by that pipeitem was added to the marshaller by reference. This
was a rather confusing mechanism, however, since it did not have any
obvious connection to the _add_by_ref() call. It was never very clear
whether you needed to pass an item to this function or not. The previous
series of patches made this parameter unnecessary since the referencing
of the pipe item (or other related structure) is now more explicitly
connected to the calls to spice_marshaller_add_by_ref_full().
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Use spice_marshaller_add_by_ref_full() instead of
spice_marshaller_add_by_ref() to allow the marshaller to manage the
lifetime of the referenced data buffer rather than having to manage it
by passing a PipeItem to red_channel_client_init_send_data(). Since the
data is owned by CursorItem (which is not in fact a RedPipeItem, but is
owned by a pipe item and is itself refcounted), we take a reference on
the CursorItem when adding the data buf to the marshaller, and then
unreference it in the marshaller free func.
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
The only time that the pipe item needs to be passed as the third
argument to red_channel_client_init_send_data() is when the pipe item
holds a data buffer that has been added to the marshaller by reference
(spice_marshaller_add_by_ref()) and needs to be kept alive until the
data has been sent. In all other cases, the item does not need to be
kept alive, so we can safely pass NULL for this third parameter.
Acked-by: Frediano Ziglio <fziglio@redhat.com>
The spice_marshaller_add_ref() family of functions is confusing since it
sounds like you're incrementing a reference on the marshaller. What it
is actually doing is adding a data buffer to the marshaller by reference
rather than by value. Changing the function names to _add_by_ref() makes
this clearer.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Pavel Grunt <pgrunt@redhat.com>
These functions were implementing the same stuff as empty
messages functions provided by RedChannel so reuse them.
The implementation seems a bit different but the result
is the same. Specifically:
- RedEmptyMsgPipeItem::msg is int while RedVerbItem::verb was
uint16_t however this data goes into the message type which
is uint16_t (a 16 bit on the network protocol);
- red_channel_client_send_empty_msg calls
red_channel_client_begin_send_message while red_marshall_verb
does not. However red_marshall_verb is called only by
cursor_channel_send_item and dcc_send_item which always
calls red_channel_client_begin_send_message.
Note that in dcc_send_item when an empty message is sent
red_channel_client_send_message_pending always returns
true;
- when a PipeItem is created red_channel_client_pipe_add_empty_msg
calls red_channel_client_push while red_pipe_add_verb does not.
This actually make very little difference as this kind of item are
never removed from the queue and a push is forced in every case
running the event handler for the stream watch (see
prepare_pipe_add and red_channel_client_event).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This was introduced with 96e94c6f32
(Convert RedChannel hierarchy to GObject).
The id of CursorChannel/DisplayChannel were always 0 causing
a wrong assertion on the code.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
This was introduced with 96e94c6f32
(Convert RedChannel hierarchy to GObject).
The handle-acks settings was TRUE for CursorChannel and DisplayChannel.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
In preparation for converting RedChannel to GObject, switch to using
RED_CHANNEL()-type macros for casting. For now they just do a regular
cast, but it helps reduce the size of the GObject patch to make it
easier to review.
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Move out of red-worker.c. This requires a little bit of minor
refactoring to avoid accessing some RedWorker internals in the
constructor function, etc.
Acked-by: Frediano Ziglio <fziglio@redhat.com>
CursorChannelClient is already defined in cursor-channel-client.h.
This fixes compilation errors with gcc 4.4.7 on RHEL 6.8.
Signed-off-by: Francois Gouget <fgouget@codeweavers.com>
Acked-by: Pavel Grunt <pgrunt@redhat.com>
Instead of using a Ring (and having a ring item link in every pipe
item), store them in a GQueue. This also necesitated changing
RedCharDeviceVDIPort->priv->read_bufs to a GList as well.
Also Optimise client pipe by passing pipe position instead of data.
This avoids having the search the data scanning all the queue changing
the order of these operations from O(n) to O(1).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Encapsulate private data of CursorChannel in a private struct. This
isn't very useful at the moment, but it will help prepare the way for
porting the RedChannel heirarchy to GObject.
Acked-by: Pavel Grunt <pgrunt@redhat.com>
Don't poke into the structure to get the channel
This prepares for encapsulating RedChannelClient a bit more and
separating it into its own source file.
The function was just calling another function with same parameters
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This reduces the number of arguments that need to be passed to the
function, and also avoids changing a different object within a function
that is supposed to just create a new object
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Upcast conversions are by definition unsafe. There are however some
location where such conversion are more safe. In this case send_item
callback is registered specifically for this type of RedChannel making
the conversion more reliable.
The other conversion (CursorChannel -> RedChannel) became safe.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Avoid converting RedChannelClient* to CursorChannelClient* and then
CursorChannelClient* to RedChannelClient* just to use RedChannelClient*.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Uri Lublin <uril@redhat.com>
The existence of this class can be hidden to user of CursorChannel class
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This function was handling mainly CursorChannel state
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
The id type is already uint64_t, no need to cast using some low
level casts.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This was proposed by Christophe as improvement over some typesafe
patches.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Scan remaining code searching for problems with structure
layout assumptions in the code.
Where code required some restructuring put some verify checks
to make sure code won't compile if these assumptions are not
in place anymore.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
