crypttab — Configuration for encrypted block devices
/etc/crypttab
The /etc/crypttab file describes
encrypted block devices that are set up during system boot.
Empty lines and lines starting with the "#"
character are ignored. Each of the remaining lines describes one
encrypted block device, fields on the line are delimited by white
space. The first two fields are mandatory, the remaining two are
optional.
Setting up encrypted block devices using this file supports three encryption modes: LUKS, TrueCrypt and plain. See cryptsetup(8) for more information about each mode. When no mode is specified in the options field and the block device contains a LUKS signature, it is opened as a LUKS device; otherwise, it is assumed to be in raw dm-crypt (plain mode) format.
The first field contains the name of the resulting encrypted
block device; the device is set up within
/dev/mapper/.
The second field contains a path to the underlying block
device or file, or a specification of a block device via
"UUID=" followed by the UUID.
The third field specifies the encryption password. If the
field is not present or the password is set to
"none" or "-", the password has
to be manually entered during system boot. Otherwise, the field is
interpreted as a absolute path to a file containing the encryption
password. For swap encryption, /dev/urandom
or the hardware device /dev/hw_random can be
used as the password file; using /dev/random
may prevent boot completion if the system does not have enough
entropy to generate a truly random encryption key.
The fourth field, if present, is a comma-delimited list of options. The following options are recognized:
discard¶Allow discard requests to be passed through the encrypted block device. This improves performance on SSD storage but has security implications.
cipher=¶Specifies the cipher to use. See
cryptsetup(8)
for possible values and the default value of this option. A
cipher with unpredictable IV values, such as
"aes-cbc-essiv:sha256", is
recommended.
hash=¶Specifies the hash to use for password hashing. See cryptsetup(8) for possible values and the default value of this option.
header=¶Use a detached (separated) metadata device or file where the LUKS header is stored. This option is only relevant for LUKS devices. See cryptsetup(8) for possible values and the default value of this option.
keyfile-offset=¶Specifies the number of bytes to skip at the start of the key file. See cryptsetup(8) for possible values and the default value of this option.
keyfile-size=¶Specifies the maximum number of bytes to read from the key file. See cryptsetup(8) for possible values and the default value of this option. This option is ignored in plain encryption mode, as the key file size is then given by the key size.
key-slot=¶Specifies the key slot to compare the
passphrase or key against. If the key slot does not match the
given passphrase or key, but another would, the setup of the
device will fail regardless. This option implies
luks. See
cryptsetup(8)
for possible values. The default is to try all key slots in
sequential order.
luks¶Force LUKS mode. When this mode is used, the
following options are ignored since they are provided by the
LUKS header on the device: cipher=,
hash=,
size=.
noauto¶This device will not be automatically unlocked on boot.
nofail¶The system will not wait for the device to show up and be unlocked at boot, and not fail the boot if it does not show up.
plain¶Force plain encryption mode.
read-only, readonly¶Set up the encrypted block device in read-only mode.
size=¶Specifies the key size in bits. See cryptsetup(8) for possible values and the default value of this option.
swap¶The encrypted block device will be used as a
swap device, and will be formatted accordingly after setting
up the encrypted block device, with
mkswap(8).
This option implies plain.
WARNING: Using the swap option will
destroy the contents of the named partition during every boot,
so make sure the underlying block device is specified
correctly.
tcrypt¶Use TrueCrypt encryption mode. When this mode
is used, the following options are ignored since they are
provided by the TrueCrypt header on the device or do not
apply:
cipher=,
hash=,
keyfile-offset=,
keyfile-size=,
size=.
When this mode is used, the passphrase is read from the key file given in the third field. Only the first line of this file is read, excluding the new line character.
Note that the TrueCrypt format uses both passphrase and
key files to derive a password for the volume. Therefore, the
passphrase and all key files need to be provided. Use
tcrypt-keyfile= to provide the absolute path
to all key files. When using an empty passphrase in
combination with one or more key files, use
"/dev/null" as the password file in the third
field.
Use the hidden TrueCrypt volume. This option
implies tcrypt.
This will map the hidden volume that is inside of the volume provided in the second field. Please note that there is no protection for the hidden volume if the outer volume is mounted instead. See cryptsetup(8) for more information on this limitation.
tcrypt-keyfile=¶Specifies the absolute path to a key file to
use for a TrueCrypt volume. This implies
tcrypt and can be used more than once to
provide several key files.
See the entry for tcrypt on the
behavior of the passphrase and key files when using TrueCrypt
encryption mode.
tcrypt-system¶Use TrueCrypt in system encryption mode. This
option implies tcrypt.
timeout=¶Specifies the timeout for querying for a password. If no unit is specified, seconds is used. Supported units are s, ms, us, min, h, d. A timeout of 0 waits indefinitely (which is the default).
x-systemd.device-timeout=¶Specifies how long systemd should wait for a
device to show up before giving up on the entry. The argument
is a time in seconds or explicitly specified units of
"s",
"min",
"h",
"ms".
tmp¶The encrypted block device will be prepared
for using it as /tmp; it will be
formatted using
mke2fs(8).
This option implies plain.
WARNING: Using the tmp option will
destroy the contents of the named partition during every boot,
so make sure the underlying block device is specified
correctly.
tries=¶Specifies the maximum number of times the user is queried for a password. The default is 3. If set to 0, the user is queried for a password indefinitely.
verify¶If the encryption password is read from console, it has to be entered twice to prevent typos.
At early boot and when the system manager configuration is reloaded, this file is translated into native systemd units by systemd-cryptsetup-generator(8).
Example 1. /etc/crypttab example
Set up four encrypted block devices. One using LUKS for normal storage, another one for usage as a swap device and two TrueCrypt volumes.
luks UUID=2505567a-9e27-4efe-a4d5-15ad146c258b swap /dev/sda7 /dev/urandom swap truecrypt /dev/sda2 /etc/container_password tcrypt hidden /mnt/tc_hidden /dev/null tcrypt-hidden,tcrypt-keyfile=/etc/keyfile