The axidma irq orders are reversed in both the device model and the instantion.
Undid both reversal (for no net change). Also needs to be reversed for
consistency with Xilinx tools IRQ listing.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Add #ifdef to avoid complaint about use of poisoned "env".
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Speeds up the build.
xilinx_ethlite uses tswap32() and is thus target-dependent.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Some versions declare open_by_handle_at, but don't define AT_EMPTY_PATH.
Extend the check in configure to test both preconditions.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Each string which is shown during readline completion in the QEMU monitor
is allocated dynamically but currently never deallocated.
Add the missing loop which calls g_free for the allocated strings.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Currently, we do not properly cleanup, if pci_bridge_dev_initfn
fails to initialize properly. Make sure to call pci_bridge_exitfn()
in the error path.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While looking into hot-plugging bridges, I can create a qemu segfault via:
$ device_add pci-bridge
Bridge chassis not specified. Each bridge is required to be assigned a unique chassis id > 0.
**
ERROR:qom/object.c:389:object_delete: assertion failed: (obj->ref == 0)
I'm proposing to fix this by adding a call to 'object_unparent()', before the
call to qdev_free(). I see there is already a precedent for this usage pattern as
seen in qdev_simple_unplug_cb():
/* can be used as ->unplug() callback for the simple cases */
int qdev_simple_unplug_cb(DeviceState *dev)
{
/* just zap it */
object_unparent(OBJECT(dev));
qdev_free(dev);
return 0;
}
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make it much more understandable, add a missing
iov_cnt argument (number of iovs in the iov), and
add comments to it.
The new implementation has been extensively tested
by splitting a large buffer into many small
randomly-sized chunks, sending it over socket to
another, slow process and verifying the receiving
data is the same.
Also add a unit test for iov_send_recv(), sending/
receiving data between two processes over a socketpair
using random vectors and random sizes.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The same as for non-coroutine versions in previous
patches: rename arguments to be more obvious, change
type of arguments from int to size_t where appropriate,
and use common code for send and receive paths (with
one extra argument) since these are exactly the same.
Use common iov_send_recv() directly.
qemu_co_sendv(), qemu_co_recvv(), and qemu_co_recv()
are now trivial #define's merely adding one extra arg.
qemu_co_sendv() and qemu_co_recvv() callers are
converted to different argument order and extra
`iov_cnt' argument.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Rename do_sendv_recvv() to iov_send_recv(), change its last arg
(do_send) from int to bool, export it in iov.h, and made the two
callers of it (iov_send() and iov_recv()) to be trivial #defines
just adding 5th arg.
iov_send_recv() will be used later.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Rename arguments and use size_t for sizes instead of int,
from
int
qemu_sendv(int sockfd, struct iovec *iov,
int len, int iov_offset)
to
ssize_t
iov_send(int sockfd, struct iovec *iov,
size_t offset, size_t bytes)
The main motivation was to make it clear that length
and offset are in _bytes_, not in iov elements: it was
very confusing before, because all standard functions
which deals with iovecs expects number of iovs, not
bytes, even the fact that struct iovec has iov_len and
iov_ prefix does not help. With "bytes" and "offset",
especially since they're now size_t, it is much more
explicit. Also change the return type to be ssize_t
instead of int.
This also changes it to match other iov-related functons,
but not _quite_: there's still no argument indicating
where iovec ends, ie, no iov_cnt parameter as used
in iov_size() and friends. If will be added in subsequent
patch/rewrite.
All callers of qemu_sendv() and qemu_recvv() and
related, like qemu_co_sendv() and qemu_co_recvv(),
were checked to verify that it is safe to use unsigned
datatype instead of int.
Note that the order of arguments is changed to: offset
and bytes (len and iov_offset) are swapped with each
other. This is to make them consistent with very similar
functions from qemu_iovec family, where offset always
follows qiov, to mean the place in it to start from.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It now allows specifying offset within qiov to start from and
amount of bytes to copy. Actual implementation is just a call
to iov_to_buf().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_iovec_concat() is currently a wrapper for
qemu_iovec_copy(), use the former (with extra
"0" arg) in a few places where it is used.
Change skip argument of qemu_iovec_copy() from
uint64_t to size_t, since size of qiov itself
is size_t, so there's no way to skip larger
sizes. Rename it to soffset, to make it clear
that the offset is applied to src.
Also change the only usage of uint64_t in
hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() -
all callers of it actually uses size_t too,
not uint64_t.
One added restriction: as for all other iovec-related
functions, soffset must point inside src.
Order of argumens is already good:
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes)
vs:
qemu_iovec_concat(QEMUIOVector *dst,
QEMUIOVector *src,
size_t soffset, size_t sbytes)
(note soffset is after _src_ not dst, since it applies to src;
for memset it applies to qiov).
Note that in many places where this function is used,
the previous call is qemu_iovec_reset(), which means
many callers actually want copy (replacing dst content),
not concat. So we may want to add a wrapper like
qemu_iovec_copy() with the same arguments but which
calls qemu_iovec_reset() before _concat().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Similar to
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes);
the new prototype is:
qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset,
const void *buf, size_t bytes);
The processing starts at offset bytes within qiov.
This way, we may copy a bounce buffer directly to
a middle of qiov.
This is exactly the same function as iov_from_buf() from
iov.c, so use the existing implementation and rename it
to qemu_iovec_from_buf() to be shorter and to match the
utility function.
As with utility implementation, we now assert that the
offset is inside actual iovec. Nothing changed for
current callers, because `offset' parameter is new.
While at it, stop using "bounce-qiov" in block/qcow2.c
and copy decrypted data directly from cluster_data
instead of recreating a temp qiov for doing that.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch combines two functions into one, and replaces
the implementation with already existing iov_memset() from
iov.c.
The new prototype of qemu_iovec_memset():
size_t qemu_iovec_memset(qiov, size_t offset, int fillc, size_t bytes)
It is different from former qemu_iovec_memset_skip(), and
I want to make other functions to be consistent with it
too: first how much to skip, second what, and 3rd how many
of it. It also returns actual number of bytes filled in,
which may be less than the requested `bytes' if qiov is
smaller than offset+bytes, in the same way iov_memset()
does.
While at it, use utility function iov_memset() from
iov.h in posix-aio-compat.c, where qiov was used.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* afaerber-or/qom-cpu-3a: (27 commits)
target-s390x: Pass S390CPU to s390_cpu_restart()
s390-virtio: Let s390_cpu_addr2state() return S390CPU
s390-virtio: Use cpu_s390x_init() to obtain S390CPU
target-s390x: Let cpu_s390x_init() return S390CPU
xen_machine_pv: Use cpu_x86_init() to obtain X86CPU
arm_pic: Pass ARMCPU to arm_pic_init_cpu()
arm_boot: Pass ARMCPU to arm_load_kernel()
xilinx_zynq: Use cpu_arm_init() to obtain ARMCPU
pxa2xx_gpio: Store ARMCPU in PXA2xxGPIOInfo
pxa2xx_pic: Store ARMCPU in PXA2xxPICState
pxa2xx: Pass ARMCPU to pxa2xx_pic_init()
exynos4210: Use cpu_arm_init() to store ARMCPU
vexpress: Use cpu_arm_init() to obtain ARMCPU
realview: Use cpu_arm_init() to obtain ARMCPU
arm_boot: Pass ARMCPU to arm_boot_info::secondary_cpu_reset_hook()
arm_boot: Pass ARMCPU to arm_boot_info::write_secondary_boot()
versatilepb: Use cpu_arm_init() to obtain ARMCPU
musicpal: Use cpu_arm_init() to obtain ARMCPU
integratorcp: Use cpu_arm_init() to obtain ARMCPU
strongarm: Use cpu_arm_init() to store ARMCPU in StrongARMState
...
* afaerber-or/qom-next-1:
target-i386: Use uint32 visitor for [x]level properties
qdev: Remove PropertyInfo range checking
qdev: Switch property accessors to fixed-width visitor interfaces
qdev: Use int32_t container for devfn property
qapi: Add String visitor coverage to serialization unit tests
qapi: String visitor, use %f representation for floats
qapi: Unit tests for visitor-based serialization
qapi: Add Visitor interfaces for uint*_t and int*_t
Due to a offset between the clock used to generate the in-kernel
count_load_time (CLOCK_MONOTONIC) and the clock used for processing this
in userspace (vm_clock), reading back the output of PIT channel 2 via
port 0x61 was broken. One use cases that suffered from it was the CPU
frequency calibration of SeaBIOS, which also affected IDE/AHCI timeouts.
This fixes it by calibrating the offset between both clocks on
kvm_pit_get and adjusting the kernel value before saving it in the
userspace state. As the calibration only works while the vm_clock is
running, we cache the in-kernel state across stopped phases.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Legacy (non-pvops) gntdev drivers may require this to be done when the
number of grants intended to be used simultaneously exceeds a certain
driver specific default limit.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
kvm_put_apic_state's attempt to clear *kapic before setting its
bits cleared sizeof(void*) bytes (no more than 8) rather than the
intended 1024 (KVM_APIC_REG_SIZE) bytes. Spotted by coverity.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Needed for moving halted field to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Pass it through to arm_pic_cpu_handler().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)
In particular this simplifies the &s->mpu->cpu->env expression again.
first_cpu and ->next_cpu are expected to be QOM'ified later.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Prepares for moving halted field into CPUState.
Add missing braces.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Prepares for moving halted field to CPUState.
Add missing braces.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Cleans up after storing ARMCPU in PXA2xxState.
Prepares for storing ARMCPU in PXA2xxPICState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Needed for arm_pic_init_cpu().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Adapt exynos4210 and highbank accordingly.
The parameter itself is unused.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)
