There is a device tree property "/chosen/linux,stdout-path" which indicates
which device should be used as stdout - ie. "the console".
Currently we don't specify anything, which means both firmware and Linux
choose something arbitrarily. Use the routine we added in the last patch
to pick a default vty and specify it as stdout.
Currently SLOF doesn't use the property, but we are hoping to update it
to do so.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 68f3a94c64)
In vty_lookup() we have a special case for supporting early debug in
the kernel. This accepts reg == 0 as a special case to mean "any vty".
We implement this by searching the vtys on the bus and returning the
first we find. This means that the vty we chose depends on the order
the vtys are specified on the QEMU command line - because that determines
the order of the vtys on the bus.
We'd rather the command line order was irrelevant, so instead return
the vty with the lowest reg value. This is still a guess as to what the
user really means, but it is at least stable WRT command line ordering.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf] fix braces
(cherry picked from commit 98331f8ad6)
Although in theory the device tree has no inherent ordering, in practice
the order of nodes in the device tree does effect the order that devices
are detected by software.
Currently the ordering is determined by the order the devices appear on
the QEMU command line. Although that does give the user control over the
ordering, it is fragile, especially when the user does not generate the
command line manually - eg. when using libvirt etc.
So order the device tree based on the reg value, ie. the address of on
the VIO bus of the devices. This gives us a sane and stable ordering.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf] add braces
(cherry picked from commit 05c194384f)
When guest reset, we need to halt secondary cpus until guest kick them.
This already works for tcg. The patch add the support for kvm.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: remove in-kernel irqchip code]
(cherry picked from commit 157feeadba)
spapr_populate_pci_devices() containd a loop with PCI_NUM_REGIONS (7)
iterations. However this overruns the 'bars' global array, which only has
6 elements. In fact we only want to run this loop for things listed in the
bars array, so this patch corrects the loop bounds to reflect that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 135712de61dfa22368e98914d65b8b0860ec8505)
The current code that updates the cbp value after a transfer looks like this:
td.cbp += ret;
if ((td.cbp & 0xfff) + ret > 0xfff) {
<handle page overflow>
because the 'ret' value is effectively added twice the check may fire too early
when the overflow hasn't happened yet.
Below is one of the possible changes that correct the behavior:
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When resetting the usb-storage device we'll have to carefully cancel
and clear any requests which might be in flight, otherwise we'll confuse
the state machine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
event_idx was introduced in 0.15 and must be disabled for all virtio-pci devices
(including virtio-balloon-pci).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The v9fs_read() and v9fs_write() functions rely on iovec[] manipulation
code should be replaced with QEMUIOVector to avoid duplicating code.
In the future it may be possible to make the code even more concise by
using QEMUIOVector consistently across virtio and 9pfs.
The "v" format specifier for pdu_marshal() and pdu_unmarshal() is
dropped since it does not actually pack/unpack anything. The specifier
was also not implemented to update the offset variable and could only be
used at the end of a format string, another sign that this shouldn't
really be a format specifier. Instead, see the new
v9fs_init_qiov_from_pdu() function.
This change avoids a possible iovec[] buffer overflow when indirect
vrings are used since the number of vectors is now limited by the
underlying VirtQueueElement and cannot be out-of-bounds.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Fsdriver callback that operate on file descriptor need to
differentiate between directory fd and file fd.
Based on the original patch from Sassan Panahinejad <sassan@sassan.me.uk>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
As per the 9p rfc, during TVERSION its necessary to clean all the active
fids, so that we start the session from a clean state. Its also needed in
scenarios where the guest is booting off 9p, and boot fails, and client
restarts, without any knowledge of the past, it will issue a TVERSION again
so this ensures that we always start from a clean state.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Now when you try to migrate with VirtFS export path mounted, you get a proper QMP error:
(qemu) migrate tcp:localhost:4444
Migration is disabled when VirtFS export path '/tmp/' is mounted in the guest using mount_tag 'v_tmp'
(qemu)
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
handle fs driver require a set of newly added syscalls. Don't
Compile handle FS driver if those syscalls are not available.
Instead of adding #ifdef for all those syscalls we check for
open by handle syscall. If that is available then rest of the
syscalls used by the driver should be available.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Commit 5632ae46d5 passes the address
of i8259 to qemu_irq_proxy. i8259 is an auto variable with undefined
value outside of mips_malta_init.
This made the interrupt proxy unusable: either QEMU crashes, or
the interrupt handler was not called.
Ethernet for example no longer worked with MIPS Malta.
v2:
While v1 used a static variable for i8259, this patch introduces
a qdev for the malta machine. i8259 is now part of the device status.
This is a minimal qdev implementation to keep the patch small.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit e9b40fd34c)
ATR size exceeding the limit is diagnosed, but then we merrily use it
anyway, overrunning card->atr[].
The message is read from a character device. Obvious security
implications unless the other end of the character device is trusted.
Spotted by Coverity. CVE-2011-4111.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I guess we can also make sure we don't call local_ioc_getversion at
all.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to Intel's Open Source Software Developer Manual,
the dump counters address must be Dword aligned.
The new code enforces this alignment, so s->statsaddr may now
be used with stw_le_pci_dma() and stl_le_pci_dma().
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vdev->guest_features is not masking features that are not supported by
the guest. Fix this by introducing a common wrapper to be used by all
virtio bus implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Small requirements on "new" features have percolated to virtio-9p-local.c.
In particular, the utimensat wrapper actually only supports dirfd = AT_FDCWD
and flags = AT_SYMLINK_NOFOLLOW in the fallback code. Remove the arguments
so that virtio-9p-local.c will not use AT_* constants.
At the same time, fail local_ioc_getversion if the ioctl is not supported
by the host.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The mmio register name list only had the names for four port status
registers. We emulate a EHCI adapter with six ports though, the last
two ones are listed as "unknown" in traces. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch makes iPXE work with the rtl8139 emulation. The rtl8139
driver in iPXE issues a 16bit access on the ChipCmd register
(offset 0x37) to check the status of the rx buffer. The offset of the
ioport access was getting fixed up to 0x36 in qemu, causing the value
read in iPXE to be invalid.
This fixes an issue with iPXE reporting timeouts during TFTP transfers.
Reposting this here because it is trivial enough and the original post
on qemu-devel didn't attract much attention.
Also, the inw() which was causing the issue has been replaced with an
inb() in upstream iPXE:
https://git.ipxe.org/ipxe.git/commit/91dd64ad25baa27954a7518e73df4fca8a2d0c93
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When detaching devices from the usb hub we must wakeup too,
otherwise the host misses the detach event.
Commit 4a33a9ea06 does the
same for device attach.
Found by hkran@linux.vnet.ibm.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qdev doesn't call the ->exit callback on ->init failures, so we have to
take care ourself that we cleanup property on errors.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use qdev_init() instead of qdev_init_nofail(), usb device initialization
can fail, most common case being port and device speed mismatch. Handle
failures correctly and pass up NULL pointers then.
Also fixup usb_create_simple() callers (only one was buggy) to properly
check for NULL pointers before referncing the usb_create_simple() return
value.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no reason why a scsi-generic device cannot boot if it has
the right type, and indeed it provides already a bootindex property.
So register those devices too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pre-1.0 firmware path for SCSI devices already included the LUN
using the suffix argument to add_boot_device_path. Avoid that it is
included twice, and convert the colons to commas for consistency with
other kinds of devices
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
USB mass storage devices are registered twice in the boot order.
To avoid having to keep the two paths in sync, pass the bootindex
property down to the scsi-disk device and let it register itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ivshmem cannot work, and the command lspci cannot show ivshmem BAR2 in the guest.
As for pci_register_bar(), parameter MemoryRegion should be s->bar instead of s->ivshmem.
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Hongyong Zang <zanghongyong@huawei.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Check pending bit only if vector mask status changed.
This is not really important for qemu.git but helps
fix a bug in qemu-kvm.git.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
>From: Jan Kiszka <jan.kiszka@siemens.com>
Only accesses to the MSI-X table must trigger a call to
msix_handle_mask_update, otherwise the vector
value might be out of range.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only go over the table when function is masked.
This is not really important for qemu.git but helps
fix a bug in qemu-kvm.git.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
AT_REMOVEDIR is not defined on all systems. Pass the raw flags from the
9p protocol, which are always there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid a conflict on the definition of struct file_handle by
using a replacement name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now when you try to migrate with ivshmem, you get a proper QMP error:
(qemu) migrate tcp:localhost:1025
Migration is disabled when using feature 'peer mode' in device 'ivshmem'
(qemu)
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Coverity thinks q could be NULL there and warns.
I believe it can't be NULL there.
Add assert to prove it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Until recently all scsi commands sent to scsi-disk did either transfer
data or finished instantly. The correct implementation of
SYNCRONIZE_CACHE changed the picture though, and usb-storage needs
a fix to handle that case correctly.
