For creation, activation and size update never triggered, because the
passed in $conf is essentially the same as the creation $settings, so
the disk was always detected to be the same as the "existing" one. But
actually, all disks are new, so it makes sense to do it.
For update, activation and size update nearly always triggered,
because only the pending changes are passed in as $conf. The case
where it didn't trigger is when the same pending change was made twice
(there are cases where hotplug isn't done, but makes it even more
unlikely).
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
'force-cpu' parameter was introduced to allow live-migration of VMs with
custom CPU models; it does not need to be allowed for general use on
vm_start for regular users, since they would be able to set arbitrary
cpu types or cpuid parameters that aren't supported.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
else this fails if we check 'boot' before the device was put into
the config or pending section.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
using the familiar early+repeated checks pattern from other API calls.
Only intended functional changes are with regard to locking/forking.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
using the familiar early+repeated checks pattern from other API calls.
Only intended functional changes are with regard to locking/forking.
For a full clone of a running VM without guest agent, this also fixes
issuing vm_{resume,suspend} calls for drive mirror completion.
Previously, those just timed out, because of not getting the lock:
> create full clone of drive scsi0 (rbdkvm:vm-104-disk-0)
> Formatting '/var/lib/vz/images/105/vm-105-disk-0.raw', fmt=raw
> size=4294967296 preallocation=off
> drive mirror is starting for drive-scsi0
> drive-scsi0: transferred 2.0 MiB of 4.0 GiB (0.05%) in 0s
> drive-scsi0: transferred 635.0 MiB of 4.0 GiB (15.50%) in 1s
> drive-scsi0: transferred 1.6 GiB of 4.0 GiB (40.50%) in 2s
> drive-scsi0: transferred 3.6 GiB of 4.0 GiB (90.23%) in 3s
> drive-scsi0: transferred 4.0 GiB of 4.0 GiB (100.00%) in 4s, ready
> all 'mirror' jobs are ready
> suspend vm
> trying to acquire lock...
> can't lock file '/var/lock/qemu-server/lock-104.conf' - got timeout
> drive-scsi0: Cancelling block job
> drive-scsi0: Done.
> resume vm
> trying to acquire lock...
> can't lock file '/var/lock/qemu-server/lock-104.conf' - got timeout
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
The volid may change if local-storage migration is involved, we need
to tell the target node the new one and update the in-memory config
for starting the target VM accordingly.
Reported here: https://forum.proxmox.com/threads/99906/#post-431345
this possibly breaks migration new -> old iff
- spice is not used (else the explicit ticket wins because it comes
later)
- a local TPM state volume is used
- that local TPM state volume has a different volume id on the target
node (switched storage, volname already taken, ..)
because the target node will then mis-interpret the tpmstate0 line as
spice ticket and set it accordingly. if the old tpm state volume ID does
not exist on the target node, migration will fail. if it exists by
chance, it might work albeit with a wrong spice ticket (new because of
this patch) and tpm state volume (pre-existing breakage).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
only do the compat fallback if no explicit spice ticket was given, and
warn on unknown parameters on STDIN.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this error path is mostly used for re-attaching disks and the like,
and the "check if task is already done" part uses a method to read
the task status that will never include a trailing newline, so add it
our self to avoid "... at /usr/share/perl5/PVE/API2/Qemu.pm line
1480. (500)"
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to re-use them for incoming remote migrations.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Fabian Ebner <f.ebner@proxmox.com>
Using $update_vm_api for unused disks will cause them to end up as a
pending change if the VM is running.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
this broke with the previous simplification.
Tested-by: Aaron Lauterer <a.lauterer@proxmox.com>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
with `storage` being optional (and not allowed for reassign operations),
the ACL path in the schema can end up as `/storage/-`, which is wrong.
replace it with an explicit check:
- target `storage` for move disk
- storage from source disk for reassign disk (we only rename here, but
it's still a new volume on that storage after all)
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
The goal of this is to expand the move-disk API endpoint to make it
possible to move a disk to another VM. Previously this was only possible
with manual intervertion either by renaming the VM disk or by manually
adding the disks volid to the config of the other VM.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
currently we only add the creation time (ctime), that was requested
as low priority wish from some users from time to time.
Note that the meta info is not available in the update API endpoints,
and at the moment the code should not change/add/delete it either in
any place.
We may want to update in on actions like clone or backup-restore in
the future, e.g., to also save the time of that event and possibly
the original source VMID, put that can be thought out later.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Acked-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
ovmf with SMM enabled will not boot on i440fx (hangs on graphics
initialization), so load the non SMM variant.
should be no issue regarding live-migration since it never worked with
this anyway.
adapts the test and adds one with q35
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-by: Stefan Reiter <s.reiter@proxmox.com>
fix the classic indentation error on `additionalProperties` in the
main QEMU API
drop some not so useful empty lines to avoid making rather huge
methods even bigger (more intimidating, less on screen to grasp the
full picture).
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Provide support for secure boot by using the new "4m" and "4m-ms"
variants of the OVMF code/vars templates. This is specified on the
efidisk via the 'efitype' and 'ms-keys' parameters.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Starts an instance of swtpm per VM in it's systemd scope, it will
terminate by itself if the VM exits, or be terminated manually if
startup fails.
Before first use, a TPM state is created via swtpm_setup. State is
stored in a 'tpmstate0' volume, treated much the same way as an efidisk.
It is migrated 'offline', the important part here is the creation of the
target volume, the actual data transfer happens via the QEMU device
state migration process.
Move-disk can only work offline, as the disk is not registered with
QEMU, so 'drive-mirror' wouldn't work. swtpm itself has no method of
moving a backing storage at runtime.
For backups, a bit of a workaround is necessary (this may later be
replaced by NBD support in swtpm): During the backup, we attach the
backing file of the TPM as a read-only drive to QEMU, so our backup
code can detect it as a block device and back it up as such, while
ensuring consistency with the rest of disk state ("snapshot" semantic).
The name for the ephemeral drive is specifically chosen as
'drive-tpmstate0-backup', diverging from our usual naming scheme with
the '-backup' suffix, to avoid it ever being treated as a regular drive
from the rest of the stack in case it gets left over after a backup for
some reason (shouldn't happen).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
like for other API calls, repeat the cheap checks done for early abort
before forking and without locks after forking and obtaining the lock,
and only hold the flock in the forked worker instead of across the fork.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Fabian Ebner <f.ebner@proxmox.com>
@bootorder only contains entries for non-legacy bootorder entries,
but the default one contains all cdroms anyway, and if the user
explicitely disabled cdroms, it is ok to not add them back
for the new cdrom drive.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
We unconditionally added an entry into the bootorder whenever we
edited the drive, even if it was already in there. Instead we only want to do
that if the bootorder list does not contain it already.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Attaching an ISO image to a VM is usually/often done for two reasons:
* booting an installer image
* supplying additional drivers to an installer (e.g. virtio)
Both of these cases (the latter at least with SeaBIOS and the Windows
installer) require the disk to be marked as bootable.
For this reason, enable the bootable flag for all new CDROM drives
attached to a VM by adding it to the bootorder list. It is appended to
the end, as otherwise it would cause new drives to boot before already
existing boot targets, which would be a more grave (and IMO bad)
behaviour change.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
otherwise a user with only VM.Config.CDROM can detach a disk from a VM
by updating it to a cdrom drive
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
storage_check_enabled simply checks for the 'disable' option and then calls
storage_check_node.
While not strictly necessary for a second call where only the storage differs,
e.g. in case of clone, it is more future-proof: if support for a target storage
is added at some point, it might be easy to miss adapting the call.
For the migration checks, the situation is improved by now always catching
disabled (target) storages.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Enables live-restore functionality using the 'alloc-track' QEMU driver.
This allows starting a VM immediately when restoring from a PBS
snapshot. The snapshot is mounted into the VM, so it can boot from that,
while guest reads and a 'block-stream' job handle the restore in the
background.
If an error occurs, the VM is deleted and all data written during the
restore is lost.
The VM remains locked during the restore, which automatically prohibits
any modifications to the config while restoring. Some modifications
might potentially be safe, however, this is experimental enough that I
believe this would cause more bad stuff(tm) than actually satisfy any
use cases.
Pool handling is slightly adjusted so the VM can be added to the pool
before the restore starts.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Commit abff03211f switched to iterating over the
values instead of the keys, but didn't update the variable name. Use target_sid,
because target is already in use for the target node.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
The existing check_vm_modify_config_perm doesn't do so anymore, but
the check only got re-added to the modify/delete paths. See commits
165be267eb and
e30f75c571 for context.
In the future, it might make sense to generalise the
check_vm_modify_config_perm and have it not only take keys, but both
new and old values, and use that generalised function everywhere.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
A fix for violating a important standard for booting[0] in recently
packaged QEMU 5.2 surfaced some issues with Windows based VMs in our
forum[1], which seem to be quite sensitive for such changes (it seems
they derive lots of their device assignment from ACPI).
User visible effects are loss of any network configuration due to
windows thinking it was swapped with a new one, and starts with a
fresh config - this is mostly problematic for setups with static
address assignment.
There may be lots of other, more subtle, effects and the PVE admin is
also not always the VM admin, so we really need to avoid such
negative effects. Do this by pinning the version of any windows based
VMs to either the minimum of (5.1, kvm-version) for existing VMs or
the kvm-version at time of VM creation for new ones.
There are patches in pve-manager for user to be able to change the
pinned version themself in the webinterface, so this can now also get
adapted more easily if there surface any other issues (with new or
old version) in the future.
0: https://lists.gnu.org/archive/html/qemu-devel/2021-02/msg08484.html
1: https://forum.proxmox.com/threads/warning-latest-patch-just-broke-all-my-windows-vms-6-3-4-patch-inside.84915/page-2#post-373331
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Since CDRoms and disks share the same config keys, we need to check if
it actually is a CDRom and then check the permissions accordingly.
Otherwise it is possible for someone without VM.Config.CDROM
permissions, but with VM.Config.Disk permissions to remove a CD drive
while being unable to create a CDRom drive.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
by checking if the vm is paused at the beginning and skipping the
resume now we also skip the qga freeze/thaw (which cannot work if the
vm is paused)
moved the 'vm_is_paused' sub from the api to PVE/QemuServer.pm so it
is available everywhere we need it.
since a suspend backup would pause the vm anyway, we can skip that
step also
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Fabian Ebner <f.ebner@proxmox.com>
Since an old change released with a version bump on 2009-09-07, we
search all enabled storages for VMID maching volumes on VM removal
and purge those too.
This has multiple pitfalls and may be quite unexpected for some
users.
It can make problems when:
* on recovery a VM is created, before disks are reattached the admin
notices some settings issues and chooses to just recreate the VM;
but during destroying the dummy VM all related disks get destroyed
unconditionally which may result in data loss. This actually
happened and is the original reason for the decision to change
this.
* a storage is shared between PVE instance (between a set of clusters
and/or single nodes), while this is against our rules it may still
come as a surprise if destroying a VM on node A may destroy
unrelated and unreferenced disks on the unrelated node B without
asking or allowing to avoid that.
As this the removal of matching but unreferenced disks can result in
permanent data loss (up to the last backup) and may be to subtle and
unforgiving, allow to opt-out of it.
In the long run we want to make this opt-in, but that is an API
change and so needs to wait for next major release. But, we can adapt
the GUI already to make it opt-in there, catching most of the cases.
side-note: CT do not have this behavior at all
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
