The restore of a backup from a VM template will first restore the VM and then
convert the restored VM back into a template.
This automatically performes the steps of the current behaviour, where the user
has to manually convert the restored VM back to a template.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
used for online local disks via qemu_drive_mirror
Add TODO comment for offline disks, as clone_disk calls `qemu-img
convert`, which does not have a bandwidth limit parameter.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
this makes it possible to give a storage for state saving, if one
wants to use a different storage than for snapshots or does not
want to save this info into the config
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a vm has the 'suspended' lock, we resume with the saved state
and remove the lock, the saved vmstate and the saved runningmachine
after the vm started
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the idea is to have the same logic as with snapshots, but without
the snapshotting of the disks, and after saving the vm state (incl memory),
we hard shut off the guest.
this way the disks will not be touched anymore by the guest
to prevent any alteration of the vm (incl migration, hw changes, etc) we
add a config lock 'suspend'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we map scsiX to virtioscsiX/scsihwX when we use virtio-scsi-single to add
and iothread so we have to map it back when we delete an iothread, else the
parsing fails with
'invalid drive key: virtioscsi0'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
qemu-img uses the qemu default initiator name 'iqn.2008-11.org.linux-kvm'
since we use the one of the host (/etc/iscsi/initiatorname.iscsi) when
using it with a running vm, we want to using it also when moving a disk
with qemu-img
to do that we have give qemu-img the image in as a full option string
this fixes the issue that we could not move an zfs-over-iscsi disk
without allowing the default qemu initiator
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Adds the 'cicustom' option to specify either or both network and user
options as property strings. Their parameters are files in a snippets
storage (e.g. local:snippets/network.yaml). If one or both are specified
they are used instead of their respective generated configuration.
This allows the use of completely custom configurations and is also a
possible solution for bug #2068 by specifying a custom user file that
contains package_upgrade: false.
Tested with Ubuntu 18.10 and cloud-init 18.4.7
Signed-off-by: David Limbeck <d.limbeck@proxmox.com>
we also need to set the link status if the whole device changed,
otherwise a change of macaddress allows a network connection even
if link_down is set to 1
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
with such a shared memory device, a vm can share data with other
vms or with the host via memory
one of the use cases is looking-glass[1] with pci-passthrough, which copies
the guest fb to the host and you get a high-speed, low-latency
display client for the vm
on vm stop we delete the file again
1: https://looking-glass.hostfission.com/
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This allows to set the wwn parameter for ide, sata and scsi disks in the VM
config and passes it to the qemu command on execution.
VirtIO Block does not supports this property, so exclude it from
there.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
commit 3c23aa808c tried to fix a issue
where after a stop mode backup a scope could still linger around, but
it actually removed the wrong check. If we want to remove a
lingering, not yet cleaned up, scope we need to check if said scope
exists not if a VM process is still running. While they are corelated
the scope will always get cleaned up _after_ it's processes are gone.
Should fix#2043, but as this is seemingly not that easy to fix one
for all I'll put the should as disclaimer here.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
this adds a new config option for it, and executes it on four
points in time:
'pre-start'
'post-start'
'pre-stop'
'post-stop'
on pre-start we abort if the script fails
and pre-stop will not be called if the vm crashes or if
the vm gets powered off from inside the guest
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The qm CLI command offer the config and showcmd functions. Both of those
outputs may vary with respect to a given snapshot. This adds a switch
that shows the corresponding snapshot's config and command line.
The code needs a newer libpve-guest-common-perl, thus bumping the
dependency.
Signed-off-by: Rhonda D'Vine <rhonda@proxmox.com>
this patch allows the user to explicitely set a virtual vga,
even when using the 'x-vga' flag, this is sometimes necessary,
as some users need the 'x-vga' flag on the pci device,
but still want to use a virtual vga
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
with this, a user can set the hv_vendor_id independently of
any 'x-vga=on' setting he may or may not have configured.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Win7 is very picky about pcie assignments and fails with
'error 12' the way we add hospci devices.
To combat that, we simply give the hostpci device a normal port
instead.
Start with address 0x10, so that we have space before those devices,
and between them and the ones configured in pve-q35.cfg should we
need it in the future.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
When not setting 'vga' we would get a warning:
Use of uninitialized value $type in string eq at
/usr/share/perl5/PVE/QemuServer.pm line 2026.
This patch changes the order of the conditions and checks if $type is set
before using it, so that we do not get the warning anymore.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that one can explicitly disable the vga without having to specify
a serial port as display, this is mostly useful for very special
and custom gpu passthrough setups which have to be specified with
'args' and for setups which do not care about any display (not even serial)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
there is nothing that should be really affected by this, but
even then, this option is only for experts and people using this
should know what they are doing
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since lspci does not split between id and function anymore,
there is no need to plug id + function together
also we can remove the capture groups from PCIRE
since parse_property_string does this check for us
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
with this, we are able to create and use mediated devices,
which include Intel GVT-g (aka KVMGT) and Nvidia vGPUs, and probably more
types of devices in the future
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we reverse the direction of the event socket (this does not
prevent live migration) and point it to wher qmeventd listens
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
On arm we start off with a pcie bridge pcie.0. We need a
keyboard in addition to the tablet device, and we need to
connect both to an 'ehci' controller.
To do all this, we also pass the $arch variable through a
whole lot of function calls to ultimately also adapt the
hotplug code to take care of the new keyboard device.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
This was never actually used, but we want to use it as
alternative to checking /proc/cpuinfo for 'hvm' on ARM.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
with commit 55655ebc32
we changed $vga to a parsed hash instead of a string
and forgot to check the property type in one place
this fixes an issue where a vm with a gpu passed through
with x-vga=on could not start
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we change 'vga' to a property string and add a 'memory' property
with this, the user can better control the memory given to the virtual
gpu, this is especially useful for spice/qxl since high resolutions need
more memory
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
When enabled, the `ssd` property exposes drives as SSDs (rather than
rotational hard disks) by setting QEMU's `rotation_rate` property [1,
2] on `ide-hd`, `scsi-block`, and `scsi-hd` devices. This is required
to enable support for TRIM and SSD-specific optimizations in certain
guest operating systems that are limited to emulated controller types
(IDE, AHCI, and non-VirtIO SCSI).
This change also unifies the diverging IDE and SATA code paths in
QemuServer::print_drivedevice_full(), which suffered from:
* Code duplication: The only differences between IDE and SATA were in
bus-unit specification and maximum device counts.
* Inconsistent implementation: The IDE code used the new `ide-hd`
and `ide-cd` device types, whereas SATA still relied on the deprecated
`ide-drive` [3, 4] (which doesn't support `rotation_rate`).
* Different feature sets: The IDE code exposed a `model` property that
the SATA code didn't, even though QEMU supports it for both.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1498042
[2] https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg00698.html
[3] https://www.redhat.com/archives/libvir-list/2012-March/msg00684.html
[4] https://lists.gnu.org/archive/html/qemu-devel/2017-05/msg02024.html
Signed-off-by: Nick Chevsky <nchevsky@gmail.com>
we will use this for the qmeventd, but we have to limit this
to qemu 2.12, because we cannot add this during a live migration
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Instead of our own. The code is almost the same, but the
upstream implementation uses qemu's transactional system and
performs a drain() on the block device first. This seems to
help avoid some issues we run into with qcow2 files when
creating snapshots.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
do not use $1 do write out config, if code gets added this may easily
get overwritten, as vmgenid is a fixed key just hardcode it.
also move the comment to where it actually belongs
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This caused a few hiccups with qemu 3.0...
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of overwriting the 'machine' config in the snapshot,
use its own 'runningmachine' config only for the snapshot
this way, we do not lose the machine type if it was
explicitely set during the snapshot, but deleted afterwards
we also have to adapt the tests for this
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
> The following are important CPU features that should be used on
> Intel x86 hosts, when available in the host CPU. Some of them
> require explicit configuration to enable, as they are not included
> by default in some, or all, of the named CPU models listed above.
> In general all of these features are included if using “Host
> passthrough” or “Host model”.
>
> pcid: Recommended to mitigate the cost of the Meltdown
> (CVE-2017-5754) fix. Included by default in Haswell, Broadwell &
> Skylake Intel CPU models. Should be explicitly turned on for
> Westmere, SandyBridge, and IvyBridge Intel CPU models. Note that
> some desktop/mobile Westmere CPUs cannot support this feature.
>
> spec-ctrl: Required to enable the Spectre (CVE-2017-5753 and
> CVE-2017-5715) fix, in cases where retpolines are not sufficient.
> Included by default in Intel CPU models with -IBRS suffix. Must be
> explicitly turned on for Intel CPU models without -IBRS suffix.
> Requires the host CPU microcode to support this feature before it
> can be used for guest CPUs.
>
> ssbd: Required to enable the CVE-2018-3639 fix. Not included by
> default in any Intel CPU model. Must be explicitly turned on for
> all Intel CPU models. Requires the host CPU microcode to support
> this feature before it can be used for guest CPUs.
>
> pdpe1gbr: Recommended to allow guest OS to use 1GB size pages.Not
> included by default in any Intel CPU model. Should be explicitly
> turned on for all Intel CPU models. Note that not all CPU hardware
> will support this feature.
-- https://www.berrange.com/posts/2018/06/29/cpu-model-configuration-for-qemu-kvm-on-x86-hosts/
changelog v2:
- remove hash
- remove check if cdrom
if we try to delete a snapshot, and that is disk from the snapshot
is not attached anymore (unused), we can't delete the snapshot
with qemu snapshot delete command (for storage which use it (qcow2,rbd,...))
example:
...
unused0: rbd:vm-107-disk-3
[snap1]
...
scsi2: rbd:vm-107-disk-3,size=1G
-> die
qmp command 'delete-drive-snapshot' failed - Device 'drive-scsi2' not found
If drive is not attached, we need to use the storage snapshot delete command
tells an user what would get touched, so he has a chance to fix
unwanted things before changes are actually made.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Else an user has no idea what, or if something happened.
Gets printed to tty when using qm rescan or to tasklog for the case
where we do a rescan after restoring a backup.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Unused disk(s) appeared after a rescan of storages. Especially shown
with ceph pools, where two storage entries are made, <storage>_ct and
<storage>_vm. The rescan method did include images from both storages.
This patch filters any storage not containing the content type 'images'.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
when a vm is suspended (e.g. autosuspend on windows)
we detect that it is not running, display the resume button,
but 'cont' does not wakeup the system from suspend
with this we can wake up suspended vms
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the not definedness check is unecessary here, since it does not
do anything then, and to check balloon twice is also not necessary
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Deleting the balloon config entry means resetting it to its
default. This means having a balloon device but not actually
doing any ballooning with it (iow. resetting the VM's
'balloon' value to its specified memory.).
Hotplugging a balloon device (coming from explicit '0' to
any other value (including deleting it)) is not possible.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
To avoid potential cleanup & post-start actions to cause
unwanted processes (such as gpg-agent) to be started as part
of the scope, as the enter_systemd_scope() function causes
the current process to enter the scope.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
when using q35 as machine type, there are nested pci-bridges,
but we only checked the first layer
this resulted in not being able to hotplug scsi devices,
because scsihw0 was deeper in the pci-bridge construct, we did not see
it and tried to add it (which fails of course)
this patch checks all bridges, regardless how deeply nested they are
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
it is not necessary to check the romfile of the running vm
for .pxe machine types, since the machine type itself is not
hot-pluggable
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we accidentally moved nbd_stop to CloudInit.pm in
commit 0c9a7596f6
and removed it in
commit 3db6e4ab70
without realizing that live local storage migration still depends on it
readd it
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
With QEMU 2.10 the serial parameter of the -drive command line option
was deprecated [1], so move the logic which adds this parameter now
to the -drive analogue -device CLI option.
Features marked deprecated will continue to work for two releases[2],
so we need to switch over before 2.12, AFAICT.
[1]: https://wiki.qemu.org/ChangeLog/2.10#Deprecated_options
[2]: https://qemu.weilnetz.de/doc/qemu-doc.html#Deprecated-features
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
since this requires O_DIRECT support by the underlying storage, which
might not be available.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this fixes an issue with zvols, which require cache=none and eat up all
free memory as buffered pages otherwise
https://github.com/zfsonlinux/zfs/issues/7235
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
